void CreateForOneSide(bool top, IStep step, IFilter filter, string PackageName, List <string> DrillLayers)
{
ICMPLayer compLayer = step.GetCMPLayer(top);
if (compLayer == null)
{
return;
}
IODBLayer newLayer = filter.CreateEmptyODBLayer("testpoint_locations_" + (top ? "top" : "bot"), step.Name);
if (newLayer == null)
{
return;
}
List <IODBLayer> allDrillLayers = new List <IODBLayer>();
foreach (string drillName in DrillLayers)
{
allDrillLayers.Add((IODBLayer)step.GetLayer(drillName));
}
int shapeIndex = IFilter.AddToolDefinitionRound(newLayer, 75);
int shapeIndexConnection = IFilter.AddToolDefinitionRound(newLayer, 1);
foreach (ICMPObject cmp in compLayer.GetAllLayerObjects())
{
if (!cmp.UsedPackageName.Contains(PackageName))
{
continue;
}
IODBObject markerPad = filter.CreatePad(newLayer);
IPadSpecificsD pad = (IPadSpecificsD)markerPad.GetSpecificsD();
pad.Location = new PCBI.MathUtils.PointD(cmp.Position);
pad.ShapeIndex = shapeIndex;
markerPad.SetSpecifics(pad);
markerPad.ObjectColor = Color.Green;
markerPad.SetAttribute("Steel needle <BST> (Testpoint)");
bool special = false;
foreach (IODBLayer drillLayer in allDrillLayers)
{
#region check drills
foreach (IODBObject drill in drillLayer.GetAllObjectsOnPosition(cmp.Position))
{
Dictionary <PCBI.FeatureAttributeEnum, string> attribs = drill.GetAttributesDictionary();
if (attribs.ContainsKey(PCBI.FeatureAttributeEnum.drill))
{
if (attribs[PCBI.FeatureAttributeEnum.drill].ToUpperInvariant() == "VIA")
{
markerPad.ObjectColor = Color.Blue;
markerPad.SetAttribute("Pyramid <H> (Via)");
special = true;
break;
}
}
}
if (special)
{
break;
}
#endregion
}
if (!special)
{
//check for component pin
foreach (ICMPObject comp in compLayer.GetAllObjectsOnPosition(cmp.Position))
{
if (comp == cmp)
{
continue; //testpunkt selbst wird ignoriert
}
foreach (IPin pin in comp.GetPinList())
{
PCBI.MathUtils.IPolyClass cmpPoly = pin.GetPolygonOutline(comp);
if (cmpPoly.PointInPolygon(pad.Location))
{
markerPad.ObjectColor = Color.Red;
markerPad.SetAttribute("Serrated <C>"); //hier evtl noch überprüfen ob pin bzw. body drüber liegt?
special = true; //oder Serrated with overlapping plastic <CS>
break;
}
}
if (special)
{
break;
}
}
}
}
foreach (ICMPObject cmp in compLayer.GetAllLayerObjects()) //neue schleife da erst alle pads plaziert werden sollen!
{
if (!cmp.UsedPackageName.Contains(PackageName))
{
continue;
}
IODBObject textForPad = filter.CreateText(newLayer);
ITextSpecificsD text = (ITextSpecificsD)textForPad.GetSpecificsD();
text.Text = cmp.Ref.Remove(0, 2); //Annahme das alle mit TP beginnen
text.TextSize = new SizeF(25, 50);
text.Location = new PCBI.MathUtils.PointD(cmp.Position.X + 50, cmp.Position.Y - 10);
text.WidthFactor = 0.6;
textForPad.SetSpecifics(text);
textForPad.ObjectColor = Color.DarkGray;
//text location should not be intersecting!
List <IObject> otherObjectsOnSameLocation = newLayer.GetAllObjectInRectangle(textForPad.GetBoundsD());
int offset = 50;
bool horChecked = false;
while (otherObjectsOnSameLocation.Count > 1)
{
//move text
if (horChecked)
{
text.Location = new PCBI.MathUtils.PointD(cmp.Position.X, cmp.Position.Y + offset);
}
else
{
text.Location = new PCBI.MathUtils.PointD(cmp.Position.X - offset - textForPad.GetBoundsD().Width, cmp.Position.Y - 10);
}
offset += 50;
horChecked = true;
textForPad.SetSpecifics(text);
otherObjectsOnSameLocation = newLayer.GetAllObjectInRectangle(textForPad.GetBoundsD());
}
IODBObject connectionLine = filter.CreateLine(newLayer);
ILineSpecificsD line = (ILineSpecificsD)connectionLine.GetSpecificsD();
line.ShapeIndex = shapeIndexConnection;
line.Start = new PCBI.MathUtils.PointD(cmp.Position);
line.End = new PCBI.MathUtils.PointD(text.Location.X, text.Location.Y + 25);
connectionLine.SetSpecifics(line);
connectionLine.ObjectColor = Color.LightGray;
}
}
private void fillNODDataList(IPCBIWindow parent, IStep step, IMatrix matrix, List <ICMPObject> lstAllCMPList, List <ThtPin> topTHTPinList, List <ThtPin> botTHTPinList, out List <string> dataList, List <INet> lstINetINetList, List <IODBObject> lstListOfAllDrillObjects, ref List <string> errorLogFile)
{
int inCounter4NONENetName = 0;
dataList = new List <string>();
string strTopSigLay = matrix.GetTopSignalLayer();
string strBotSigLay = matrix.GetBotSignalLayer();
IODBLayer iodblayTopSig, iodblayBotSig, iodblayCurrSigLay;
string strPosition = string.Empty;
string strTecn = string.Empty;
string strNetName = string.Empty;
string strCmpRef = string.Empty;
string strInfo = string.Empty;
ICMPObject iCmOCMPObject;
char chrWhiteSpa = ' ';
int minAbstand = 15;
int maxAbstand = 52;
int dist = betterToRead;
if (lstAllCMPList == null)
{
errorLogFile.Add("Method: fillNODDataList + lstAllCMPList is null");
return;
}
// to get the maximum name length
/*if (lstAllCMPList.Count > 0)
* {
* foreach (ICMPObject cmp in lstAllCMPList)
* {
* if (cmp != null && !string.IsNullOrEmpty(cmp.PartName))
* {
* if (maxAbstand < cmp.PartName.Length)
* {
* maxAbstand = cmp.PartName.Length;
* }
* }
* else
* {
* errorLogFile.Add("Method: fillNODDataList + lstAllCMPList is null");
* return;
* }
* }
* }
* else
* {
* MessageBox.Show("No componentens could be found");
* return;
* }
*
*
*
* if (lstINetINetList.Count > 0)
* {
* foreach (INet tempNet in lstINetINetList)
* {
* if (tempNet != null && !string.IsNullOrEmpty(tempNet.NetName))
* {
* if (maxAbstand < tempNet.NetName.Length)
* {
* maxAbstand = tempNet.NetName.Length;
* }
* }
* else
* {
* errorLogFile.Add("Method: fillNODDataList + lstINetInetList is null");
* return;
* }
* }
* }
* else
* {
* MessageBox.Show("No componentens could be found");
* return;
* }*/
maxAbstand = maxAbstand + 2;
if (!string.IsNullOrEmpty(strTopSigLay))
{
iodblayTopSig = (IODBLayer)step.GetLayer(strTopSigLay);
}
else
{
errorLogFile.Add("Method: fillNODDataList + strTopSigLay is null");
iodblayTopSig = null;
}
if (!string.IsNullOrEmpty(strBotSigLay))
{
iodblayBotSig = (IODBLayer)step.GetLayer(strBotSigLay);
}
else
{
errorLogFile.Add("Method: fillNODDataList + strBotSigLay is null");
iodblayBotSig = null;
}
dataList.Add("* " + "NetName".PadRight(minAbstand, chrWhiteSpa) + "CMP-Ref".PadRight(minAbstand, chrWhiteSpa) + "PinNr.".PadRight(minAbstand, chrWhiteSpa) + "X".PadRight(minAbstand, chrWhiteSpa) + "Y".PadRight(minAbstand, chrWhiteSpa) + "PadSize".PadRight(minAbstand, chrWhiteSpa) + "Pinposition".PadRight(minAbstand, chrWhiteSpa) + "CMP-Typ".PadRight(minAbstand, chrWhiteSpa) + "TEST".PadRight(minAbstand, chrWhiteSpa) + "CHANNEL".PadRight(minAbstand, chrWhiteSpa) + "USER");
dataList.Add("* ");
foreach (INet net in lstINetINetList)
{
if (net == null)
{
errorLogFile.Add("Method: fillNODDataList + net is null");
return;
}
List <INetObject> lstNetComponentList = net.ComponentList;
if (lstNetComponentList == null)
{
errorLogFile.Add("Method: fillNODDataList + lstNetComponentList is null");
return;
}
foreach (INetObject inetObj in lstNetComponentList)
{
iCmOCMPObject = inetObj.ICMP;
if (iCmOCMPObject == null)
{
errorLogFile.Add("Method: fillNODDataList + iCmOCMPObject is null");
continue;
}
strTecn = string.Empty;
bool boPinIsTopSoldered = true;
bool boPinIsPartOfTHT = false;
if (!useTHTSearch)
{
boPinIsTopSoldered = iCmOCMPObject.PlacedTop;
}
else
{
if (iCmOCMPObject.PlacedTop) // true is top layer
{
boPinIsTopSoldered = true;
foreach (var entry in topTHTPinList)
{
if (entry == null)
{
errorLogFile.Add("Method: fillNODDataList + entry is null");
return;
}
if (entry.Cmp.Ref == iCmOCMPObject.Ref)
{
boPinIsPartOfTHT = true;
boPinIsTopSoldered = false;
break;
}
}
}
else
{
boPinIsTopSoldered = false;
foreach (var entry in botTHTPinList)
{
if (entry == null)
{
errorLogFile.Add("Method: fillNODDataList + entry is null");
return;
}
if (entry.Cmp.Ref == iCmOCMPObject.Ref)
{
boPinIsPartOfTHT = true;
boPinIsTopSoldered = true;
break;
}
}
}
}
if (boPinIsPartOfTHT == true)
{
strTecn = "T";
}
else
{
strTecn = "S";
}
if (boPinIsTopSoldered)
{
strPosition = "T";
if (iodblayTopSig != null)
{
iodblayCurrSigLay = iodblayTopSig;
}
else
{
errorLogFile.Add("Method: fillNODDataList + iodblayTopSig is null");
return;
}
}
else
{
strPosition = "B";
if (iodblayBotSig != null)
{
iodblayCurrSigLay = iodblayBotSig;
}
else
{
errorLogFile.Add("Method: fillNODDataList + iodblayBotSig is null");
return;
}
}
IPin pin = inetObj.GetIPin();
{
if (pin == null)
{
errorLogFile.Add("Method: fillNODDataList + pin is null");
continue;
}
IODBObject iodbobPinPad = null;
if (iodblayCurrSigLay != null)
{
iodbobPinPad = pin.GetIPinPad(iodblayCurrSigLay, iCmOCMPObject);
}
if (net.NetName == null)
{
errorLogFile.Add("Method: fillNODDataList + net.NetName is null");
return;
}
if (net.NetName == "$NONE$")
{
strNetName = '"' + net.NetName + inCounter4NONENetName.ToString(System.Globalization.CultureInfo.InvariantCulture) + '"';
inCounter4NONENetName++;
}
else
{
strNetName = '"' + net.NetName + '"';
}
strCmpRef = '"' + iCmOCMPObject.Ref + '"';
string strPadString = string.Empty;
double holeDiameter = 0;
bool rotationExists = false;
bool holeExists = false;
double doWidth = 0, doHeight = 0, doDegree = 0;
if (iodbobPinPad != null)
{
IObjectSpecificsD spec = iodbobPinPad.GetSpecificsD();
if (spec == null)
{
errorLogFile.Add("Method: fillNODDataList + spec is null");
return;
}
if (spec is IPadSpecificsD)
{
IPadSpecificsD pSpec = (IPadSpecificsD)spec;
//pSpec.ShapeIndex
if (pSpec == null)
{
errorLogFile.Add("Method: fillNODDataList + pSpec is null");
return;
}
IFilter filter = new IFilter(parent);
if (filter == null)
{
errorLogFile.Add("Method: fillNODDataList + filter is null");
return;
}
IFilter.ToolDefinition toolDef = filter.GetSymbolByShapeIndex(pSpec.ShapeIndex, iodblayCurrSigLay);
if (toolDef == null)
{
errorLogFile.Add("Method: fillNODDataList + toolDef is null");
return;
}
switch (toolDef.Type)
{
case PCBI.Symbol_Type.r: //round
foreach (IODBObject drill in lstListOfAllDrillObjects)
{
if (drill == null)
{
errorLogFile.Add("Method: fillNODDataList + drill is null");
return;
}
if (drill.IsPointOfSecondObjectIncluded(iodbobPinPad))
{
holeExists = true;
holeDiameter = drill.GetDiameter();
}
}
if (holeExists)
{
strPadString = "R" + Math.Round(toolDef.Diameter, 0).ToString(System.Globalization.CultureInfo.InvariantCulture) + "H" + Math.Round(holeDiameter, 0).ToString(System.Globalization.CultureInfo.InvariantCulture);
}
else
{
strPadString = "R" + Math.Round(toolDef.Diameter, 0).ToString(System.Globalization.CultureInfo.InvariantCulture);
}
break;
case PCBI.Symbol_Type.s: // square
//toolDef.Diameter;
RectangleD bounds = iodbobPinPad.GetBoundsD();
if (bounds == null)
{
errorLogFile.Add("Method: fillNODDataList + bounds are null");
return;
}
if (pSpec.Rotation != 0)
{
IPolyClass padPoly = iodbobPinPad.GetPolygonOutline();
if (padPoly == null)
{
errorLogFile.Add("Method: fillNODDataList + padPoly is null");
return;
}
padPoly.Rotate(-pSpec.Rotation);
padPoly.UpdateBounds();
bounds = padPoly.GetBounds();
}
strPadString = "X" + Math.Round(bounds.Height, 0).ToString(System.Globalization.CultureInfo.InvariantCulture);
break;
case PCBI.Symbol_Type.rect:
default:
RectangleD rectBounds = iodbobPinPad.GetBoundsD();
if (rectBounds == null)
{
errorLogFile.Add("Method: fillNODDataList + bounds are null");
return;
}
if (pSpec.Rotation != 0)
{
doDegree = pSpec.Rotation;
rotationExists = true;
IPolyClass padPoly = iodbobPinPad.GetPolygonOutline();
if (padPoly == null)
{
errorLogFile.Add("Method: fillNODDataList + padPoly is null");
return;
}
padPoly.Rotate(-pSpec.Rotation);
padPoly.UpdateBounds();
rectBounds = padPoly.GetBounds();
}
doWidth = rectBounds.Width;
doHeight = rectBounds.Height;
if (rotationExists)
{
strPadString = "X" + Math.Round(doWidth, 0).ToString(System.Globalization.CultureInfo.InvariantCulture) + "Y" + Math.Round(doHeight, 0).ToString(System.Globalization.CultureInfo.InvariantCulture) + "A" + Math.Round(doDegree, 0).ToString(System.Globalization.CultureInfo.InvariantCulture);
}
else
{
foreach (IODBObject drill in lstListOfAllDrillObjects)
{
if (drill == null)
{
errorLogFile.Add("Method: fillNODDataList + drill is null");
return;
}
if (drill.IsPointOfSecondObjectIncluded(iodbobPinPad))
{
holeExists = true;
holeDiameter = drill.GetDiameter();
}
}
if (holeExists)
{
strPadString = "X" + Math.Round(doWidth, 0).ToString(System.Globalization.CultureInfo.InvariantCulture) + "Y" + Math.Round(doHeight, 0).ToString(System.Globalization.CultureInfo.InvariantCulture) + "H" + Math.Round(holeDiameter, 0).ToString(System.Globalization.CultureInfo.InvariantCulture);
}
else
{
strPadString = "X" + Math.Round(doWidth, 0).ToString(System.Globalization.CultureInfo.InvariantCulture) + "Y" + Math.Round(doHeight, 0).ToString(System.Globalization.CultureInfo.InvariantCulture);
}
}
break;
}
}
}
else
{
strPadString = "0";
errorLogFile.Add("Method: fillNODDataList + iodbobPinPad is null");
return;
}
string strXValue = (Math.Round(IMath.Mils2MM(pin.GetIPinPositionD(iCmOCMPObject).X), digits)).ToString(System.Globalization.CultureInfo.InvariantCulture);
string strYValue = (Math.Round(IMath.Mils2MM(pin.GetIPinPositionD(iCmOCMPObject).Y), digits)).ToString(System.Globalization.CultureInfo.InvariantCulture);
strInfo = string.Concat(strNetName.PadRight(strNetName.Length + dist, chrWhiteSpa),
strCmpRef.PadRight(strCmpRef.Length + dist, chrWhiteSpa),
pin.PinNumber.PadRight(pin.PinNumber.Length + dist, chrWhiteSpa),
strXValue.PadRight(strXValue.Length + dist, chrWhiteSpa),
strYValue.PadRight(strYValue.Length + dist, chrWhiteSpa),
strPadString.PadRight(strPadString.Length + dist, chrWhiteSpa),
strPosition.PadRight(strPosition.Length + dist, chrWhiteSpa),
strTecn.PadRight(strTecn.Length + dist, chrWhiteSpa),
"Y".PadRight(2, chrWhiteSpa),
"0".PadRight(2, chrWhiteSpa), " ");
if (!dataList.Contains(strInfo))
{
dataList.Add(strInfo);
}
}
}
}
}