public static IMonitorRealTimeModel InitialMonit(IMonitorRealTimeModel monitorReal)
{
JDMonitorRealTimeModel monitorRealTimeModel = monitorReal as JDMonitorRealTimeModel;
monitorRealTimeModel.ErrCount = -1;
monitorRealTimeModel.ErrCodeList = new int[] { 0, 0 };
monitorRealTimeModel.ErrDescList = new string[] { "", "" };
monitorRealTimeModel.AbsCoord = new double[] { -1, -1, -1, -1, -1, -1 };
monitorRealTimeModel.MachCoord = new double[] { -1, -1, -1, -1, -1, -1 };
monitorRealTimeModel.RelCoord = new double[] { -1, -1, -1, -1, -1, -1 };
monitorRealTimeModel.WorkCount = -1;
monitorRealTimeModel.CurLineNo = new int[] { -1 };
monitorRealTimeModel.CurrLineText = "";
monitorRealTimeModel.CurrMainO = -1;
monitorRealTimeModel.CurrO = -1;
monitorRealTimeModel.CurrWCoord = -1;
int[] _dh = { -1, -1 };
monitorRealTimeModel.dH = (int[])_dh.Clone();
monitorRealTimeModel.FeedRate = -1;
monitorRealTimeModel.MachTime = -1;
monitorRealTimeModel.Mode = -1;
monitorRealTimeModel.ProgCtrlState = -1;
monitorRealTimeModel.ProgState = -1;
int[] _rate = { -1, -1 };
monitorRealTimeModel.Rates = (int[])_rate.Clone();
monitorRealTimeModel.RunTime = -1;
double[] _sin = { -1, -1, -1 };
monitorRealTimeModel.Sinfo = (double[])_sin.Clone();
monitorRealTimeModel.SpindleSpeed = -1;
int[] time = { -1, -1, -1, -1, -1, -1, -1 };
monitorRealTimeModel.time = (int[])time.Clone();
monitorRealTimeModel.Dist = new double[2] {
0, -1
};
double[] _double = { -1, -1, -1 };
monitorRealTimeModel.Times = (double[])_double.Clone();
monitorRealTimeModel.ToolNO = -1;
monitorRealTimeModel.Rates = new int[] { -1, -1 };
monitorRealTimeModel.RepairStatus = -1;
monitorRealTimeModel.RepairStatusOn = -1;
monitorRealTimeModel.AlarmDesc = -1;
monitorRealTimeModel.AlarmDescOn = -1;
monitorReal = monitorRealTimeModel as IMonitorRealTimeModel;
return(monitorReal);
}
public override bool GetData(IMonitorRealTimeModel model)
{
try
{
JDMonitorRealTimeModel monitorRealTimeModel = model as JDMonitorRealTimeModel;
//机床坐标
double[] machCorrd = new double[6];
double[] absCorrd = new double[6];
double[] relCorrd = new double[6];
if (Function.GetMachPos(ptr, machCorrd, absCorrd, relCorrd))
{
monitorRealTimeModel.MachCoord = machCorrd;
monitorRealTimeModel.AbsCoord = absCorrd;
monitorRealTimeModel.RelCoord = relCorrd;
}
else
{
return(false);
}
//机床程序状态
int progState = -1;
int almInfo = -1;
if (Function.GetMachAlmInfo(ptr, ref almInfo))
{
if (almInfo == 0)
{
if (Function.GetProgState(ptr, ref progState))
{
monitorRealTimeModel.ProgState = progState;
}
else
{
return(false);
}
}
else
{
progState = 4;
monitorRealTimeModel.ProgState = progState;
int errCount = -1;
int[] errCodeList = new int[50];
byte[,] errDescList = new byte[50, 128];
List <string> errDesc = new List <string>();
if (Function.GetCncErrList(ptr, ref errCount, errCodeList, errDescList))
{
byte[] buff = new byte[128];
for (int i = 0; i < 50; i++)
{
for (int j = 0; j < 128; j++)
{
buff[j] = errDescList[i, j];
}
string str = Encoding.Default.GetString(buff).Replace("\0", "").Replace("\r", "").Replace("\n", "");
errDesc.Add(str);
}
{
using (Materiel_NoScan_V2Entities cie = new Materiel_NoScan_V2Entities())
{
var alarminfo = cie.JDJS_WMS_Device_Alarm_History_Table.Where(r => r.CncID == this.cncInfo.ID && r.EndTime == null);
if (alarminfo.Count() < 1)
{
for (int i = 0; i < errCount; i++)
{
JDJS_WMS_Device_Alarm_History_Table alarms = new JDJS_WMS_Device_Alarm_History_Table()
{
CncID = this.cncInfo.ID,
ErrCode = errCodeList[i].ToString(),
ErrDesc = errDesc[i],
StartTime = DateTime.Now,
};
cie.JDJS_WMS_Device_Alarm_History_Table.Add(alarms);
}
cie.SaveChanges();
}
}
}
}
else
{
errCount = -1; errCodeList = null; errDescList = null;
}
monitorRealTimeModel.ErrCount = errCount;
monitorRealTimeModel.ErrCodeList = errCodeList;
monitorRealTimeModel.ErrDescList = errDesc.ToArray();
}
}
else
{
return(false);
}
//机床模态
int currwCorrd = -1;
float feedrate = -1;
int spindlespeed = -1;
int toolno = -1;
float machTime = -1;
int curro = -1;
int curroMaino = -1;
if (Function.GetBasicModalInfo(ptr, ref currwCorrd, ref feedrate, ref spindlespeed, ref toolno, ref machTime, ref curro, ref curroMaino))
{
monitorRealTimeModel.CurrWCoord = currwCorrd;
monitorRealTimeModel.FeedRate = feedrate;
monitorRealTimeModel.SpindleSpeed = spindlespeed;
monitorRealTimeModel.ToolNO = toolno;
monitorRealTimeModel.MachTime = machTime;
monitorRealTimeModel.CurrO = curro;
monitorRealTimeModel.CurrMainO = curroMaino;
}
else
{
return(false);
}
//机床时间信息
double[] times = new double[3];
if (Function.GetTime(ptr, times))
{
//model.Times = times;
monitorRealTimeModel.Times = times;
}
else
{
return(false);
}
//工件计数
int count = -1;
if (Function.GetMachinedWorkpieceCount(ptr, ref count))
{
monitorRealTimeModel.WorkCount = count;
}
else
{
return(false);
}
//倍率信息
int[] rates = new int[2];
if (Function.GetRate(ptr, rates))
{
monitorRealTimeModel.Rates = rates;
}
else
{
return(false);
}
//主轴信息
double[] sinfo = new double[3];
if (Function.GetSpindleInfo(ptr, sinfo))
{
monitorRealTimeModel.Sinfo = sinfo;
}
else
{
return(false);
}
//当前运行行号
int[] curlineno = new int[3];
if (Function.GetCurLineNo(ptr, curlineno))
{
monitorRealTimeModel.CurLineNo = curlineno;
}
else
{
return(false);
}
//当前运行行文本
StringBuilder curlinetext = new StringBuilder();
curlinetext.Capacity = 200000;
if (Function.GetCurrLineText(ptr, curlinetext))
{
monitorRealTimeModel.CurrLineText = curlinetext.ToString();
}
else
{
return(false);
}
//机床系统时间
int[] time = new int[7];
if (Function.GetMachTime(ptr, time))
{
//model.time = time;
monitorRealTimeModel.time = time;
}
else
{
return(false);
}
//当前xyzabc剩余量没有相关函数
//当前工作模式 获取机床的操作模式：
//1、回参考点是128
//2、打再寸动上是32
//3、又打到回参考点之后又是128
//3、打到手轮上，是64
//4、程序运行 是 2
//5、MDI是4
//6、编辑是1
//7、点动是16
int modell = -1;
int mode = -1;
if (Function.GetOprationMode(ptr, ref mode))
{
switch (mode)
{
case 1:
modell = 1; //编辑
break;
case 2:
modell = 2; //程序运行
break;
case 4:
modell = 3; //mdi
break;
case 8:
modell = 8; //程序自动远程运行
break;
case 16:
modell = 4; //点动
break;
case 32:
modell = 5; //寸动
break;
case 64:
modell = 6; //手轮
break;
case 128:
modell = 7; //回参考点
break;
case 256:
modell = 9;
break;
}
monitorRealTimeModel.Mode = modell;
}
else
{
return(false);
}
model = monitorRealTimeModel as IMonitorRealTimeModel;
return(true);
}
catch (Exception ex)
{
if (!Directory.Exists("log"))
{
Directory.CreateDirectory("log");
}
using (StreamWriter write = new StreamWriter("log/" + DateTime.Now.Year.ToString() + "-" + DateTime.Now.Month.ToString() + "-" + DateTime.Now.Day.ToString() + ".log", true))
{
write.WriteLine(DateTime.Now.ToString() + " " + ex);
}
return(false);
}
}
/// <summary> /// 获取机床数据 /// </summary> /// <param name="model">记录机床数据的对象</param> /// <returns></returns> public abstract bool GetData(IMonitorRealTimeModel model);