/// <summary>
/// Builds a smooth surfaced grid with the origin in the bottom-left corner.
/// </summary>
/// <remarks>
/// The grid is comprised of quads with no shared vertices, allowing flat shading.
/// </remarks>
/// <param name="meshBuilder">Mesh builder.</param>
/// <param name="cellWidth">Cell width.</param>
/// <param name="cellLength">Cell length.</param>
/// <param name="segmentCount">Segment count.</param>
/// <param name="heightFunc">Height func.</param>
public static void BuildSmoothGrid(this IMeshBuilder meshBuilder, float cellWidth, float cellLength, int segmentCount, Func <int, int, float> heightFunc)
{
int baseIndex = 0;
for (int i = 0; i < segmentCount; i++)
{
for (int j = 0; j < segmentCount; j++)
{
var x = cellWidth * j;
var z = cellLength * i;
meshBuilder.Vertices.Add(new Vector3(x, heightFunc(j, i), z));
meshBuilder.Vertices.Add(new Vector3(x, heightFunc(j, i + 1), z + cellLength));
meshBuilder.Vertices.Add(new Vector3(x + cellWidth, heightFunc(j + 1, i + 1), z + cellLength));
meshBuilder.Vertices.Add(new Vector3(x + cellWidth, heightFunc(j + 1, i), z));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
baseIndex += 4;
}
}
}
public static void ExtrudeToCenter(this IMeshBuilder meshBuilder, IMeshSelection meshSelection)
{
var p = Vector3.zero;
for (int i = 0; i < meshSelection.Count; i++)
{
p += meshBuilder.Vertices[meshSelection[i]];
}
p = p / meshSelection.Count;
meshBuilder.Vertices.Add(p);
meshBuilder.UVs.Add(Vector2.zero);
// meshBuilder.Colors.Add(new Color(1f, 1f, 1f, 1f));
for (int i = 0; i < meshSelection.Count - 1; i++)
{
var i1 = meshSelection[i];
var i2 = meshBuilder.Vertices.Count - 1;
var i3 = meshSelection[i + 1];
meshBuilder.AddTriangle(i1, i2, i3);
}
// Add the final face.
meshBuilder.AddTriangle(meshBuilder.Vertices.Count - 2, meshBuilder.Vertices.Count - 1, meshSelection[0]);
}
/// <summary>
/// Builds a single quad based on a position offset and width and length vectors.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="offset">A position offset for the quad.</param>
/// <param name="widthDir">The width vector of the quad.</param>
/// <param name="lengthDir">The length vector of the quad.</param>
public static void BuildQuad(this IMeshBuilder meshBuilder, Vector3 offset, Vector3 widthDir, Vector3 lengthDir)
{
Vector3 normal = Vector3.Cross(lengthDir, widthDir).normalized;
meshBuilder.Vertices.Add(offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + lengthDir);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + lengthDir + widthDir);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + widthDir);
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(normal);
//we don't know how many verts the meshBuilder is up to, but we only care about the four we just added:
int baseIndex = meshBuilder.Vertices.Count - 4;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
}
/// <summary>
/// Builds a grid using quads with shared vertices, and the origin in the bottom-left corner.
/// </summary>
public static void BuildSmoothGrid(this IMeshBuilder meshBuilder, float cellWidth, float cellLength, int columns, int rows, Func <int, int, float> heightFunc, Func <int, int, QuadCorners, Color> colorFunc = null)
{
if (colorFunc == null)
{
colorFunc = (i, j, quad) => Color.white;
}
int baseIndex = 0;
for (int i = 0; i < rows; i++)
{
for (int j = 0; j < columns; j++)
{
var x = cellWidth * j;
var z = cellLength * i;
var h0 = heightFunc(j, i);
var h1 = heightFunc(j, i + 1);
var h2 = heightFunc(j + 1, i + 1);
var h3 = heightFunc(j + 1, i);
QuadCorners quad;
quad.c0 = new Vector3(x, h0, z);
quad.c1 = new Vector3(x, h1, z + cellLength);
quad.c2 = new Vector3(x + cellWidth, h2, z + cellLength);
quad.c3 = new Vector3(x + cellWidth, h3, z);
var c = colorFunc(j, i, quad);
meshBuilder.Vertices.Add(quad.c0);
meshBuilder.Colors.Add(c);
meshBuilder.Vertices.Add(quad.c1);
meshBuilder.Colors.Add(c);
meshBuilder.Vertices.Add(quad.c2);
meshBuilder.Colors.Add(c);
meshBuilder.Vertices.Add(quad.c3);
meshBuilder.Colors.Add(c);
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
baseIndex += 4;
}
}
}
public static void BuildCylinder(this IMeshBuilder meshBuilder, int numSegments, int numLayers, float radius, float height)
{
var angleDelta = Mathf.PI * 2f / numSegments;
var layerHeight = height / numLayers;
var bottom = new Vector3(0f, 0f, 0f);
var top = new Vector3(0f, height, 0f);
meshBuilder.Vertices.Add(bottom);
meshBuilder.Vertices.Add(top);
for (int j = 0; j < numLayers; j++)
{
// The vertical position of the bottom of the current layer.
var h = j * layerHeight;
for (int i = 0; i <= numSegments; i++)
{
var a = angleDelta * -i;
var p1 = new Vector3(Mathf.Cos(a) * radius, h, Mathf.Sin(a) * radius);
var p2 = p1 + Vector3.up * layerHeight;
meshBuilder.Vertices.Add(p1);
meshBuilder.Vertices.Add(p2);
var numVerts = meshBuilder.Vertices.Count;
if (i > 0)
{
// side
meshBuilder.AddTriangle(numVerts - 2, numVerts - 3, numVerts - 4);
meshBuilder.AddTriangle(numVerts - 2, numVerts - 1, numVerts - 3);
// bottom
if (j == 0)
{
meshBuilder.AddTriangle(numVerts - 4, 0, numVerts - 2);
}
// top
if (j == numLayers - 1)
{
meshBuilder.AddTriangle(numVerts - 1, 1, numVerts - 3);
}
}
}
}
}
/// <summary>
/// Builds a single quad as part of a mesh grid.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="position">A position offset for the quad. Specifically the position of the corner vertex of the quad.</param>
/// <param name="uv">The UV coordinates of the quad's corner vertex.</param>
/// <param name="buildTriangles">Should triangles be built for this quad? This value should be false if this is the first quad in any row or collumn.</param>
/// <param name="vertsPerRow">The number of vertices per row in this grid.</param>
public static void BuildQuadForGrid(this IMeshBuilder meshBuilder, Vector3 position, Vector2 uv, bool buildTriangles, int vertsPerRow)
{
meshBuilder.Vertices.Add(position);
meshBuilder.UVs.Add(uv);
if (buildTriangles)
{
int baseIndex = meshBuilder.Vertices.Count - 1;
int index0 = baseIndex;
int index1 = baseIndex - 1;
int index2 = baseIndex - vertsPerRow;
int index3 = baseIndex - vertsPerRow - 1;
meshBuilder.AddTriangle(index0, index2, index1);
meshBuilder.AddTriangle(index2, index3, index1);
}
}
public static void BuildQuad(this IMeshBuilder meshBuilder, int bottomIndex, int topIndex)
{
var bl = bottomIndex;
var tl = topIndex;
var tr = topIndex + 1;
var br = bottomIndex + 1;
Log.Trace("Building quad: verts=[{0},{1},{2},{3}], indices=[{4},{5},{6},{7}]",
meshBuilder.Vertices[bl],
meshBuilder.Vertices[tl],
meshBuilder.Vertices[tr],
meshBuilder.Vertices[br],
bl,
tl,
tr,
br);
meshBuilder.AddTriangle(bl, tl, br);
meshBuilder.AddTriangle(br, tl, tr);
}
public virtual void BuildMesh(IMeshBuilder meshBuilder, IStyleConfig styleConfig)
{
this.ApplyStyle(styleConfig);
var baseIndex = meshBuilder.Vertices.Count;
foreach (var face in this.Faces)
{
var numVerts = face.Corners.Count;
for (int i = 0; i < face.Corners.Count; i++)
{
var v = face.Corners[i].Position;
var uv = face.UVs[i];
var worldPos = this.Transform.Position + (this.Transform.Rotation * Vector3.Scale(v, this.Transform.Scale));
meshBuilder.Vertices.Add(worldPos);
meshBuilder.UVs.Add(uv);
meshBuilder.Colors.Add(face.Color);
}
if (numVerts == 3)
{
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
}
else if (numVerts == 4)
{
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 3);
meshBuilder.AddTriangle(baseIndex + 1, baseIndex + 2, baseIndex + 3);
}
else
{
throw new InvalidOperationException(string.Format("Cannot build mesh for faces with {0} vertices", numVerts));
}
baseIndex = meshBuilder.Vertices.Count;
}
}
/// <summary>
/// Builds a single quad in the XZ plane, facing up the Y axis.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="offset">A position offset for the quad.</param>
/// <param name="width">The width of the quad.</param>
/// <param name="length">The length of the quad.</param>
public static void BuildQuad(this IMeshBuilder meshBuilder, Vector3 offset, float width, float length)
{
meshBuilder.Vertices.Add(new Vector3(0.0f, 0.0f, 0.0f) + offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(0.0f, 0.0f, length) + offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(width, 0.0f, length) + offset);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(width, 0.0f, 0.0f) + offset);
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
//we don't know how many verts the meshBuilder is up to, but we only care about the four we just added:
int baseIndex = meshBuilder.Vertices.Count - 4;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
}
/// <summary>
/// Builds a single triangle.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="corner0">The vertex position at index 0 of the triangle.</param>
/// <param name="corner1">The vertex position at index 1 of the triangle.</param>
/// <param name="corner2">The vertex position at index 2 of the triangle.</param>
public static void BuildTriangle(this IMeshBuilder meshBuilder, Vector3 corner0, Vector3 corner1, Vector3 corner2)
{
Vector3 normal = Vector3.Cross((corner1 - corner0), (corner2 - corner0)).normalized;
meshBuilder.Vertices.Add(corner0);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(corner1);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(corner2);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(normal);
int baseIndex = meshBuilder.Vertices.Count - 3;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
}
public static void BuildIcosahedron(this IMeshBuilder meshBuilder, float radius = 1f)
{
// create 12 vertices of a icosahedron
float t = (1f + Mathf.Sqrt(5f)) / 2f;
meshBuilder.AddVertex(new Vector3(-1f, t, 0f).normalized *radius);
meshBuilder.AddVertex(new Vector3(1f, t, 0f).normalized *radius);
meshBuilder.AddVertex(new Vector3(-1f, -t, 0f).normalized *radius);
meshBuilder.AddVertex(new Vector3(1f, -t, 0f).normalized *radius);
meshBuilder.AddVertex(new Vector3(0f, -1f, t).normalized *radius);
meshBuilder.AddVertex(new Vector3(0f, 1f, t).normalized *radius);
meshBuilder.AddVertex(new Vector3(0f, -1f, -t).normalized *radius);
meshBuilder.AddVertex(new Vector3(0f, 1f, -t).normalized *radius);
meshBuilder.AddVertex(new Vector3(t, 0f, -1f).normalized *radius);
meshBuilder.AddVertex(new Vector3(t, 0f, 1f).normalized *radius);
meshBuilder.AddVertex(new Vector3(-t, 0f, -1f).normalized *radius);
meshBuilder.AddVertex(new Vector3(-t, 0f, 1f).normalized *radius);
// create 20 triangles of the icosahedron
// 5 faces around point 0
meshBuilder.AddTriangle(0, 11, 5);
meshBuilder.AddTriangle(0, 5, 1);
meshBuilder.AddTriangle(0, 1, 7);
meshBuilder.AddTriangle(0, 7, 10);
meshBuilder.AddTriangle(0, 10, 11);
// 5 adjacent faces
meshBuilder.AddTriangle(1, 5, 9);
meshBuilder.AddTriangle(5, 11, 4);
meshBuilder.AddTriangle(11, 10, 2);
meshBuilder.AddTriangle(10, 7, 6);
meshBuilder.AddTriangle(7, 1, 8);
// 5 faces around point 3
meshBuilder.AddTriangle(3, 9, 4);
meshBuilder.AddTriangle(3, 4, 2);
meshBuilder.AddTriangle(3, 2, 6);
meshBuilder.AddTriangle(3, 6, 8);
meshBuilder.AddTriangle(3, 8, 9);
// 5 adjacent faces
meshBuilder.AddTriangle(4, 9, 5);
meshBuilder.AddTriangle(2, 4, 11);
meshBuilder.AddTriangle(6, 2, 10);
meshBuilder.AddTriangle(8, 6, 7);
meshBuilder.AddTriangle(9, 8, 1);
}
public static void BuildIcoSphere(this IMeshBuilder meshBuilder, int recursionLevel = 3, float radius = 1f)
{
List <Vector3> vertList = new List <Vector3>();
Dictionary <long, int> middlePointIndexCache = new Dictionary <long, int>();
// create 12 vertices of a icosahedron
float t = (1f + Mathf.Sqrt(5f)) / 2f;
vertList.Add(new Vector3(-1f, t, 0f).normalized *radius);
vertList.Add(new Vector3(1f, t, 0f).normalized *radius);
vertList.Add(new Vector3(-1f, -t, 0f).normalized *radius);
vertList.Add(new Vector3(1f, -t, 0f).normalized *radius);
vertList.Add(new Vector3(0f, -1f, t).normalized *radius);
vertList.Add(new Vector3(0f, 1f, t).normalized *radius);
vertList.Add(new Vector3(0f, -1f, -t).normalized *radius);
vertList.Add(new Vector3(0f, 1f, -t).normalized *radius);
vertList.Add(new Vector3(t, 0f, -1f).normalized *radius);
vertList.Add(new Vector3(t, 0f, 1f).normalized *radius);
vertList.Add(new Vector3(-t, 0f, -1f).normalized *radius);
vertList.Add(new Vector3(-t, 0f, 1f).normalized *radius);
// create 20 triangles of the icosahedron
List <TriangleIndices> faces = new List <TriangleIndices>();
// 5 faces around point 0
faces.Add(new TriangleIndices(0, 11, 5));
faces.Add(new TriangleIndices(0, 5, 1));
faces.Add(new TriangleIndices(0, 1, 7));
faces.Add(new TriangleIndices(0, 7, 10));
faces.Add(new TriangleIndices(0, 10, 11));
// 5 adjacent faces
faces.Add(new TriangleIndices(1, 5, 9));
faces.Add(new TriangleIndices(5, 11, 4));
faces.Add(new TriangleIndices(11, 10, 2));
faces.Add(new TriangleIndices(10, 7, 6));
faces.Add(new TriangleIndices(7, 1, 8));
// 5 faces around point 3
faces.Add(new TriangleIndices(3, 9, 4));
faces.Add(new TriangleIndices(3, 4, 2));
faces.Add(new TriangleIndices(3, 2, 6));
faces.Add(new TriangleIndices(3, 6, 8));
faces.Add(new TriangleIndices(3, 8, 9));
// 5 adjacent faces
faces.Add(new TriangleIndices(4, 9, 5));
faces.Add(new TriangleIndices(2, 4, 11));
faces.Add(new TriangleIndices(6, 2, 10));
faces.Add(new TriangleIndices(8, 6, 7));
faces.Add(new TriangleIndices(9, 8, 1));
// refine triangles
for (int i = 0; i < recursionLevel; i++)
{
List <TriangleIndices> faces2 = new List <TriangleIndices>();
foreach (var tri in faces)
{
// replace triangle by 4 triangles
int a = getMiddlePoint(tri.v1, tri.v2, ref vertList, ref middlePointIndexCache, radius);
int b = getMiddlePoint(tri.v2, tri.v3, ref vertList, ref middlePointIndexCache, radius);
int c = getMiddlePoint(tri.v3, tri.v1, ref vertList, ref middlePointIndexCache, radius);
faces2.Add(new TriangleIndices(tri.v1, a, c));
faces2.Add(new TriangleIndices(tri.v2, b, a));
faces2.Add(new TriangleIndices(tri.v3, c, b));
faces2.Add(new TriangleIndices(a, b, c));
}
faces = faces2;
}
for (int i = 0; i < vertList.Count; i++)
{
meshBuilder.Vertices.Add(vertList[i]);
}
for (int i = 0; i < faces.Count; i++)
{
meshBuilder.AddTriangle(faces[i].v1, faces[i].v2, faces[i].v3);
}
for (int i = 0; i < vertList.Count; i++)
{
meshBuilder.Normals.Add(vertList[i].normalized);
// meshBuilder.UVs.Add(Vector2.zero);
// meshBuilder.Colors.Add(ColorHelper.RandomRGB());
}
}
public unsafe void PolygonizeCell(float[] values, Vector3[] positions, float isoLevel, IMeshBuilder builder)
{
Profiler.BeginSample("cubeIndex");
// Determine the index into the edge table which
// tells us which vertices are inside of the surface
var cubeIndex = 0;
if (values[0] < isoLevel)
{
cubeIndex |= 1;
}
if (values[1] < isoLevel)
{
cubeIndex |= 2;
}
if (values[2] < isoLevel)
{
cubeIndex |= 4;
}
if (values[3] < isoLevel)
{
cubeIndex |= 8;
}
if (values[4] < isoLevel)
{
cubeIndex |= 16;
}
if (values[5] < isoLevel)
{
cubeIndex |= 32;
}
if (values[6] < isoLevel)
{
cubeIndex |= 64;
}
if (values[7] < isoLevel)
{
cubeIndex |= 128;
}
Profiler.EndSample();
// Cube is entirely in/out of the surface
if (EdgeTable[cubeIndex] == 0)
{
return;
}
Profiler.BeginSample("EdgeTable");
var vertices = stackalloc Vector3[12];
// Find the vertices where the surface intersects the cube
if ((EdgeTable[cubeIndex] & 1) > 0)
{
vertices[0] = Interpolate(isoLevel, positions[0], positions[1], values[0], values[1]);
}
if ((EdgeTable[cubeIndex] & 2) > 0)
{
vertices[1] = Interpolate(isoLevel, positions[1], positions[2], values[1], values[2]);
}
if ((EdgeTable[cubeIndex] & 4) > 0)
{
vertices[2] = Interpolate(isoLevel, positions[2], positions[3], values[2], values[3]);
}
if ((EdgeTable[cubeIndex] & 8) > 0)
{
vertices[3] = Interpolate(isoLevel, positions[3], positions[0], values[3], values[0]);
}
if ((EdgeTable[cubeIndex] & 16) > 0)
{
vertices[4] = Interpolate(isoLevel, positions[4], positions[5], values[4], values[5]);
}
if ((EdgeTable[cubeIndex] & 32) > 0)
{
vertices[5] = Interpolate(isoLevel, positions[5], positions[6], values[5], values[6]);
}
if ((EdgeTable[cubeIndex] & 64) > 0)
{
vertices[6] = Interpolate(isoLevel, positions[6], positions[7], values[6], values[7]);
}
if ((EdgeTable[cubeIndex] & 128) > 0)
{
vertices[7] = Interpolate(isoLevel, positions[7], positions[4], values[7], values[4]);
}
if ((EdgeTable[cubeIndex] & 256) > 0)
{
vertices[8] = Interpolate(isoLevel, positions[0], positions[4], values[0], values[4]);
}
if ((EdgeTable[cubeIndex] & 512) > 0)
{
vertices[9] = Interpolate(isoLevel, positions[1], positions[5], values[1], values[5]);
}
if ((EdgeTable[cubeIndex] & 1024) > 0)
{
vertices[10] = Interpolate(isoLevel, positions[2], positions[6], values[2], values[6]);
}
if ((EdgeTable[cubeIndex] & 2048) > 0)
{
vertices[11] = Interpolate(isoLevel, positions[3], positions[7], values[3], values[7]);
}
Profiler.EndSample();
Profiler.BeginSample("TriTable");
/* Create the triangle */
for (var i = 0; TriTable[cubeIndex][i] != -1; i += 3)
{
builder.AddTriangle(
vertices[TriTable[cubeIndex][i]],
vertices[TriTable[cubeIndex][i + 1]],
vertices[TriTable[cubeIndex][i + 2]]
);
}
Profiler.EndSample();
}
public static IMeshSelection ExtrudeEdge(
this IMeshBuilder meshBuilder,
IMeshSelection edge,
Func <int, Vector3, Vector3> extrudeTranslationFunc)
{
Log.Trace("Will extrude edge {0}. Total vertices in mesh = {1}", edge, meshBuilder.Vertices.Count);
var lowerEdge = new MeshSelection(edge);
var extrudedEdge = new MeshSelection();
// Check if we're dealing with a closed selection loop.
var isClosed = lowerEdge.IsClosed;
if (isClosed)
{
Log.Trace("The edge has the same start and end point {0}", lowerEdge[0]);
}
// Extrude new vertices from the current source vertices.
for (int i = 0; i < lowerEdge.Count; i++)
{
var extrudeIdx = lowerEdge[i];
var p = meshBuilder.Vertices[extrudeIdx];
Log.Trace("extrudeIdx = {0}", extrudeIdx);
// TODO: Need to skip duplicate indexes when the start/end range is wrapped.
var translation = extrudeTranslationFunc(i, p);
var newVertexIdx = meshBuilder.AddVertex(p + translation);
extrudedEdge.Add(newVertexIdx);
// TODO: This currently assumes the normal won't be changed by the translation. Need fix
// support rotation as well.
meshBuilder.Normals.Add(meshBuilder.Normals[extrudeIdx]);
}
if (isClosed)
{
extrudedEdge.Add(extrudedEdge[0]);
}
Log.Trace("Building {0} quads", edge.Count);
Assert.AreEqual(lowerEdge.Count, extrudedEdge.Count, "Number of extruded indices should match the number of lower indices");
Log.Trace("lowerEdge = {0}", lowerEdge);
Log.Trace("extrudedEdge = {0}", extrudedEdge);
// Build quads between the start vertices and the extruded vertices, using the virtual
// selection which includes the closing vertex index.
for (int i = 0; i < lowerEdge.VirtualCount - 1; i++)
{
var bl = lowerEdge.GetAtVirtualIndex(i);
var tl = extrudedEdge.GetAtVirtualIndex(i);
var tr = extrudedEdge.GetAtVirtualIndex(i + 1);
var br = lowerEdge.GetAtVirtualIndex(i + 1);
Log.Trace("Building quad: verts=[{0},{1},{2},{3}], indices=[{4},{5},{6},{7}]",
meshBuilder.Vertices[bl],
meshBuilder.Vertices[tl],
meshBuilder.Vertices[tr],
meshBuilder.Vertices[br],
bl,
tl,
tr,
br);
meshBuilder.AddTriangle(bl, tl, br);
meshBuilder.AddTriangle(br, tl, tr);
}
return(extrudedEdge);
}
