private IGeometry BuildGrid()
{
var lines = new ILineString[_numLines * 2];
int index = 0;
for (int i = 0; i < _numLines; i++)
{
Coordinate p0 = new Coordinate(GetRandOrdinate(), 0);
Coordinate p1 = new Coordinate(GetRandOrdinate(), GridWidth);
ILineString line = _geomFactory.CreateLineString(new [] { p0, p1 });
lines[index++] = line;
}
for (int i = 0; i < _numLines; i++)
{
Coordinate p0 = new Coordinate(0, GetRandOrdinate());
Coordinate p1 = new Coordinate(GridWidth, GetRandOrdinate());
ILineString line = _geomFactory.CreateLineString(new [] { p0, p1 });
lines[index++] = line;
}
IMultiLineString ml = _geomFactory.CreateMultiLineString(lines);
_grid = ml.Buffer(_lineWidth);
var wktWriter = new WKTWriter(2) {Formatted = true, MaxCoordinatesPerLine = 6};
if (Verbose)
Console.WriteLine(wktWriter.Write(_grid));
return _grid;
}
public static Point[] TransformToImageI(ILineString line, Map map, bool simplifyGeometry, ref int pointCount)
{
var length = line.Coordinates.Length;
var points = new Point[length];
points[0] = WorldtoMap(line.Coordinates[0], map);
Point pt = points[0];
Point pt2 = pt;
pointCount = 1;
int i = 1;
for (; i < length - 1; i++)
{
pt = WorldtoMap(line.Coordinates[i], map);
if (!simplifyGeometry || Math.Abs(pt2.X - pt.X) > 0 || Math.Abs(pt2.Y - pt.Y) > 0)
{
points[pointCount] = pt;
pointCount++;
pt2 = pt;
}
}
if (length > 1)
points[pointCount++] = WorldtoMap(line.Coordinates[i], map);
return points;
}
public bool Intersects(Coordinate pt, ILineString ring)
{
var seq = ring.CoordinateSequence;
var seqProj = Project(seq, _facingPlane);
Coordinate ptProj = Project(pt, _facingPlane);
return Location.Exterior != RayCrossingCounter.LocatePointInRing(ptProj, seqProj);
}
/// <summary>
/// </summary>
/// <param name="line">the line to buffer</param>
/// <param name="startWidth">the buffer width at the start of the line</param>
/// <param name="endWidth">the buffer width at the end of the line</param>
/// <returns>The variable-width buffer polygon</returns>
public static IGeometry Buffer(ILineString line, double startWidth,
double endWidth)
{
var width = Interpolate(line, startWidth, endWidth);
var vb = new VariableWidthBuffer(line, width);
return vb.GetResult();
}
/// <summary>
///
/// </summary>
/// <param name="line"></param>
/// <returns></returns>
public static IGeometry LineStringSelfIntersectionsOp(ILineString line)
{
IGeometry lineEndPts = GetEndPoints(line);
IGeometry nodedLine = line.Union(lineEndPts);
IGeometry nodedEndPts = GetEndPoints(nodedLine);
IGeometry selfIntersections = nodedEndPts.Difference(lineEndPts);
return selfIntersections;
}
private static void GeometryToSqlGeometry(ILineString geom, SqlGeometryBuilder bldr)
{
bldr.BeginGeometry(OpenGisGeometryType.LineString);
AddFigure(geom, bldr);
bldr.EndGeometry();
}
private static IMultiLineString SqlGeometryToGeometryMultiLineString(SqlGeometry geometry, GeometryFactory factory)
{
ILineString[] lineStrings = new ILineString[geometry.STNumGeometries().Value];
for (int i = 1; i <= lineStrings.Length; i++)
lineStrings[i - 1] = SqlGeometryToGeometryLineString(geometry.STGeometryN(i), factory);
return factory.CreateMultiLineString(lineStrings);
}
public override void StartRun(int runSize)
{
int nVertices = runSize*DENSIFY_FACTOR;
_line1 = CreateLine("LINESTRING (0 0, 100 100)", nVertices);
_line2 = CreateLine("LINESTRING (0 1, 100 99)", nVertices);
// force compilation of intersects code
_line1.Intersects(_line2);
}
/// <summary>
/// Renders a LineString to the map.
/// </summary>
/// <param name="g">Graphics reference</param>
/// <param name="line">LineString to render</param>
/// <param name="pen">Pen style used for rendering</param>
/// <param name="map">Map reference</param>
public static void DrawLineString(System.Drawing.Graphics g, ILineString line, System.Drawing.Pen pen, SharpMap.Map map)
{
if (line.Coordinates.Length > 1)
{
System.Drawing.Drawing2D.GraphicsPath gp = new System.Drawing.Drawing2D.GraphicsPath();
gp.AddLines(Transform.TransformToImage(line, map));
g.DrawPath(pen, gp);
}
}
private static void AddFigure(ILineString line, SqlGeometryBuilder bldr)
{
IList<Coordinate> coords = line.Coordinates;
bldr.BeginFigure(coords[0].X, coords[0].Y);
for (int i = 0; i < coords.Count; i++)
bldr.AddLine(coords[i].X, coords[i].Y);
bldr.EndFigure();
}
private void Add(ILineString lineString)
{
ICoordinateSequence seq = lineString.CoordinateSequence;
for (int i = 1; i < seq.Count; i++)
{
Coordinate prev = seq.GetCoordinate(i - 1);
Coordinate curr = seq.GetCoordinate(i);
graph.AddEdge(prev, curr);
}
}
/// <summary>
///
/// </summary>
public LineStringSamples() : base()
{
ICoordinate[] coordinates = new ICoordinate[]
{
new Coordinate(10, 10),
new Coordinate(20, 20),
new Coordinate(20, 10),
};
line = Factory.CreateLineString(coordinates);
}
public static IGeometry angleBisectors(IGeometry g)
{
var pts = trianglePts(g);
var cc = Triangle.InCentre(pts[0], pts[1], pts[2]);
var geomFact = FunctionsUtil.getFactoryOrDefault(g);
var line = new ILineString[3];
line[0] = geomFact.CreateLineString(new Coordinate[] { pts[0], cc });
line[1] = geomFact.CreateLineString(new Coordinate[] { pts[1], cc });
line[2] = geomFact.CreateLineString(new Coordinate[] { pts[2], cc });
return geomFact.CreateMultiLineString(line);
}
private Coordinate[][] WriteGeom(JsonWriter writer, ILineString ls)
{
if (ls == null)
throw new ArgumentNullException("ls");
writer.WritePropertyName("arcs");
writer.WriteStartArray();
writer.WriteValue(0);
writer.WriteEndArray();
return new[] { ls.Coordinates };
}
/// <summary>
/// return the coordinates along the gridProfile at stepSize intervals.
/// </summary>
/// <param name="gridProfile"></param>
/// <param name="stepSize"></param>
/// <returns></returns>
public static IEnumerable<ICoordinate> GetGridProfileCoordinates(ILineString gridProfile, double stepSize)
{
var lengthIndexedLine = new LengthIndexedLine(gridProfile);
if (0 == stepSize)
throw new ArgumentException("Stepsize too small", "stepSize");
int count = (int)((gridProfile.Length / stepSize) + 1);
for (int i=0; i<count; i++)
{
yield return (ICoordinate)lengthIndexedLine.ExtractPoint(i * stepSize).Clone();
}
}
/// <summary>
/// Fills gridvalues function with profiledata based on profileline over the grid
/// </summary>
/// <param name="function"></param>
/// <param name="grid"></param>
/// <param name="polyline"></param>
public static void UpdateGridValues(Function function, IRegularGridCoverage grid, ILineString polyline)
{
function.Clear();
double offset = 0;
double step = polyline.Length / 100;
foreach (ICoordinate coordinate in GetGridProfileCoordinates(polyline, step))
{
function[offset] = grid.Evaluate(coordinate);
offset += step;
}
}
private static ILineString ExtractChain(ILineString line, int index, int maxChainSize)
{
int size = maxChainSize + 1;
if (index + size > line.NumPoints)
size = line.NumPoints - index;
Coordinate[] pts = new Coordinate[size];
for (int i = 0; i < size; i++)
{
pts[i] = line.GetCoordinateN(index + i);
}
return line.Factory.CreateLineString(pts);
}
public static IGeometry AngleBisectors(IGeometry g)
{
Coordinate[] pts = TrianglePts(g);
Triangle t = new Triangle(pts[0], pts[1], pts[2]);
Coordinate cc = t.InCentre();
IGeometryFactory geomFact = FunctionsUtil.GetFactoryOrDefault(g);
ILineString[] line = new ILineString[3];
line[0] = geomFact.CreateLineString(new[] { pts[0], cc });
line[1] = geomFact.CreateLineString(new[] { pts[1], cc });
line[2] = geomFact.CreateLineString(new[] { pts[2], cc });
return geomFact.CreateMultiLineString(line);
}
public static void LineStringSnapAllTrackers(ref double minDistance, ref ISnapResult snapResult, ILineString lineString, ICoordinate worldPos)
{
for (int i = 0; i < lineString.Coordinates.Length; i++)
{
ICoordinate c1 = lineString.Coordinates[i];
double distance = GeometryHelper.Distance(c1.X, c1.Y, worldPos.X, worldPos.Y);
if (distance >= minDistance)
continue;
minDistance = distance;
snapResult = new SnapResult(lineString.Coordinates[i], null, lineString, i, i);
}
}
public static void ComputeDistance(ILineString line, Coordinate pt, PointPairDistance ptDist)
{
var coords = line.Coordinates;
var tempSegment = new LineSegment();
for (var i = 0; i < coords.Length - 1; i++)
{
tempSegment.SetCoordinates(coords[i], coords[i + 1]);
// this is somewhat inefficient - could do better
var closestPt = tempSegment.ClosestPoint(pt);
ptDist.SetMinimum(closestPt, pt);
}
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="file">The stream to read.</param>
/// <param name="geometryFactory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override IGeometry Read(BigEndianBinaryReader file, IGeometryFactory geometryFactory)
{
int shapeTypeNum = file.ReadInt32();
type = (ShapeGeometryType) Enum.Parse(typeof(ShapeGeometryType), shapeTypeNum.ToString());
if (type == ShapeGeometryType.NullShape)
return geometryFactory.CreateMultiLineString(null);
if (!(type == ShapeGeometryType.LineString || type == ShapeGeometryType.LineStringM ||
type == ShapeGeometryType.LineStringZ || type == ShapeGeometryType.LineStringZM))
throw new ShapefileException("Attempting to load a non-arc as arc.");
// Read and for now ignore bounds.
int bblength = GetBoundingBoxLength();
bbox = new double[bblength];
for (; bbindex < 4; bbindex++)
{
double d = file.ReadDouble();
bbox[bbindex] = d;
}
int numParts = file.ReadInt32();
int numPoints = file.ReadInt32();
int[] partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
partOffsets[i] = file.ReadInt32();
ILineString[] lines = new ILineString[numParts];
for (int part = 0; part < numParts; part++)
{
int start, finish, length;
start = partOffsets[part];
if (part == numParts - 1)
finish = numPoints;
else finish = partOffsets[part + 1];
length = finish - start;
CoordinateList points = new CoordinateList();
points.Capacity = length;
for (int i = 0; i < length; i++)
{
double x = file.ReadDouble();
double y = file.ReadDouble();
ICoordinate external = new Coordinate(x, y);
geometryFactory.PrecisionModel.MakePrecise(external);
points.Add(external);
}
ILineString line = geometryFactory.CreateLineString(points.ToArray());
lines[part] = line;
}
geom = geometryFactory.CreateMultiLineString(lines);
GrabZMValues(file);
return geom;
}
public void Setup()
{
factory = GeometryFactory.Fixed;
a = factory.CreateLineString(new ICoordinate[]
{
new Coordinate(0, 0),
new Coordinate(100, 0),
new Coordinate(200, 100),
new Coordinate(200, 200),
});
b = factory.CreateLineString(new ICoordinate[]
{
new Coordinate(0, 0),
new Coordinate(100, 100),
new Coordinate(200, 200),
});
c = factory.CreateLineString(new ICoordinate[]
{
new Coordinate(0, 0),
new Coordinate(0, 100),
new Coordinate(100, 200),
new Coordinate(200, 200),
});
d = factory.CreateLineString(new ICoordinate[]
{
new Coordinate(0, 0),
new Coordinate(300, 0),
new Coordinate(300, 200),
new Coordinate(150, 200),
new Coordinate(150, 300),
});
e = factory.CreateLineString(new ICoordinate[]
{
new Coordinate(100, 300),
new Coordinate(150, 300),
new Coordinate(200, 300),
});
result = factory.CreateLineString(new ICoordinate[]
{
new Coordinate(0, 0),
new Coordinate(300, 0),
new Coordinate(300, 200),
new Coordinate(150, 200),
new Coordinate(150, 300),
});
revresult = result.Reverse();
start = a.StartPoint;
end = d.EndPoint;
}
public void Render(LittleSharpRenderEngine engine, Graphics graphics, ILineString line, ILineStyle style)
{
if (line == null || style == null)
return;
System.Drawing.Drawing2D.GraphicsPath gp = new System.Drawing.Drawing2D.GraphicsPath();
//TODO: Does not seems to add a single long line, but multiple line segments
gp.AddLines(RenderUtil.CoordToPoint(line.Coordinates));
if (style.Outlines != null)
foreach(IOutline linestyle in style.Outlines)
RenderUtil.RenderOutline(engine, graphics, gp, linestyle);
}
public static void LineStringSnapFreeAtObject(ref double minDistance, ref ISnapResult snapResult, IFeature feature, ILineString lineString, ICoordinate worldPos)
{
int vertexIndex;
var nearestPoint = GeometryHelper.GetNearestPointAtLine(lineString, worldPos, minDistance, out vertexIndex);
if (nearestPoint == null)
{
return;
}
minDistance = GeometryHelper.Distance(nearestPoint.X, nearestPoint.Y, worldPos.X, worldPos.Y);
snapResult = new SnapResult(nearestPoint, feature, lineString, vertexIndex - 1, vertexIndex);
}
/// <summary>
/// Renders a LineString to the map.
/// </summary>
/// <param name="g">IGraphics reference</param>
/// <param name="line">LineString to render</param>
/// <param name="pen">Pen style used for rendering</param>
/// <param name="map">Map reference</param>
/// <param name="offset">Offset by which line will be moved to right</param>
public void DrawLineString(IGraphics g, ILineString line, Pen pen, Map map, float offset)
{
var points = line.TransformToImage(map);
if (points.Length > 1)
{
var gp = new GraphicsPath();
if (offset != 0d)
points = RendererHelper.OffsetRight(points, offset);
gp.AddLines(/*LimitValues(*/points/*, ExtremeValueLimit)*/);
g.DrawPath(pen, gp);
}
}
public static IGeometry PerpendicularBisectors(IGeometry g)
{
Coordinate[] pts = TrianglePts(g);
Coordinate cc = Triangle.Circumcentre(pts[0], pts[1], pts[2]);
IGeometryFactory geomFact = FunctionsUtil.GetFactoryOrDefault(g);
ILineString[] line = new ILineString[3];
Coordinate p0 = (new LineSegment(pts[1], pts[2])).ClosestPoint(cc);
line[0] = geomFact.CreateLineString(new[] { p0, cc });
Coordinate p1 = (new LineSegment(pts[0], pts[2])).ClosestPoint(cc);
line[1] = geomFact.CreateLineString(new[] { p1, cc });
Coordinate p2 = (new LineSegment(pts[0], pts[1])).ClosestPoint(cc);
line[2] = geomFact.CreateLineString(new[] { p2, cc });
return geomFact.CreateMultiLineString(line);
}
/// <summary>
/// Simplifies the line with the given tolerance.
/// Writes the result in file.
/// </summary>
/// <param name="line">Line to simplify</param>
/// <param name="tolerance">Tolerance to use by simplify function</param>
/// <param name="supposedResult">The supposed result</param>
/// <param name="index"></param>
public void Simplify(ILineString line, double tolerance, ILineString supposedResult, int index)
{
try
{
Console.WriteLine("Job {0} started", index);
IGeometry geometry = TopologyPreservingSimplifier.Simplify((ILineString)line.Clone(), tolerance);
Assert.IsTrue(geometry.Equals(supposedResult));
Console.WriteLine("Job {0} terminated", index);
}
finally
{
Interlocked.Increment(ref _finishedJob);
}
}
public static void LineStringSnapFree(ref double minDistance, ref ISnapResult snapResult, ILineString lineString, ICoordinate worldPos)
{
for (int i = 1; i < lineString.Coordinates.Length; i++)
{
ICoordinate c1 = lineString.Coordinates[i - 1];
ICoordinate c2 = lineString.Coordinates[i];
double distance = GeometryHelper.LinePointDistance(c1.X, c1.Y, c2.X, c2.Y,
worldPos.X, worldPos.Y);
if (distance >= minDistance)
continue;
minDistance = distance;
snapResult = new SnapResult(GeometryFactory.CreateCoordinate(worldPos.X, worldPos.Y), null, lineString, i - 1, i);
}
}
private static ILineString RemoveCurvePoint(ILineString lineString, int removeNumber, ICoordinate addCoordinate)
{
List<ICoordinate> vertices = new List<ICoordinate>();
for (int i = 0; (i >= 0) && (i < lineString.Coordinates.Length - removeNumber); i++)
{
vertices.Add(lineString.Coordinates[i]);
}
if (null != addCoordinate)
vertices.Add(addCoordinate);
if (vertices.Count > 1)
return GeometryFactory.CreateLineString(vertices.ToArray());
return null;
}
/// <summary>
/// Converts a collection of <see cref="ISegmentString"/>s into a <see cref="IGeometry"/>.
/// The geometry will be either a <see cref="ILineString"/>
/// or a <see cref="IMultiLineString"/> (possibly empty).
/// </summary>
/// <param name="segStrings">A collection of <see cref="ISegmentString"/>.</param>
/// <param name="geomFact">A geometry factory</param>
/// <returns>A <see cref="ILineString"/> or a <see cref="IMultiLineString"/>.</returns>
public static IGeometry ToGeometry(IList<ISegmentString> segStrings, IGeometryFactory geomFact)
{
ILineString[] lines = new ILineString[segStrings.Count];
int index = 0;
foreach (ISegmentString ss in segStrings)
{
ILineString line = geomFact.CreateLineString(ss.Coordinates);
lines[index++] = line;
}
if (lines.Length == 1)
return lines[0];
return geomFact.CreateMultiLineString(lines);
}
public static void DrawLineString(Graphics g, ILineString line, Pen pen, MapViewport map)
{
DrawLineString(g, line, pen, map, 0);
}
private Dictionary <T, double> GetNewFractions(IList <int> trackerIndices, ILineString newLineString)
{
var newFractions = BranchToBranchFeatureService.UpdateNewFractions(originalBranchGeometry, newLineString, fractionLookUp.Values.ToList(), trackerIndices, FallOffPolicy);
return(fractionLookUp.Keys.Zip(newFractions).ToDictionary(f => f.First, f => f.Second));
}
public ILineString Transform(ILineString g)
{
return(new LineString(Transform(g.Coordinates)));
}
/// <summary>
/// Saves the file to a new location
/// </summary>
/// <param name="fileName">The fileName to save</param>
/// <param name="overwrite">Boolean that specifies whether or not to overwrite the existing file</param>
public override void SaveAs(string fileName, bool overwrite)
{
EnsureValidFileToSave(fileName, overwrite);
Filename = fileName;
// Set ShapeType before setting header.
if (CoordinateType == CoordinateType.Regular)
{
Header.ShapeType = ShapeType.PolyLine;
}
if (CoordinateType == CoordinateType.M)
{
Header.ShapeType = ShapeType.PolyLineM;
}
if (CoordinateType == CoordinateType.Z)
{
Header.ShapeType = ShapeType.PolyLineZ;
}
HeaderSaveAs(fileName);
if (IndexMode)
{
SaveAsIndexed(Filename);
return;
}
var bbWriter = new BufferedBinaryWriter(Filename);
var indexWriter = new BufferedBinaryWriter(Header.ShxFilename);
int fid = 0;
int offset = 50; // the shapefile header starts at 100 bytes, so the initial offset is 50 words
int contentLength = 0;
foreach (IFeature f in Features)
{
List <int> parts = new List <int>();
offset += contentLength; // adding the previous content length from each loop calculates the word offset
List <Coordinate> points = new List <Coordinate>();
contentLength = 22;
for (int iPart = 0; iPart < f.Geometry.NumGeometries; iPart++)
{
parts.Add(points.Count);
ILineString bl = f.Geometry.GetGeometryN(iPart) as ILineString;
if (bl == null)
{
continue;
}
points.AddRange(bl.Coordinates);
}
contentLength += 2 * parts.Count;
if (Header.ShapeType == ShapeType.PolyLine)
{
contentLength += points.Count * 8; // x, y
}
if (Header.ShapeType == ShapeType.PolyLineM)
{
contentLength += 8; // mmin mmax
contentLength += points.Count * 12; // x, y, m
}
if (Header.ShapeType == ShapeType.PolyLineZ)
{
contentLength += 16; // mmin, mmax, zmin, zmax
contentLength += points.Count * 16; // x, y, z, m
}
// Index File
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
indexWriter.Write(offset, false); // Byte 0 Offset Integer 1 Big
indexWriter.Write(contentLength, false); // Byte 4 Content Length Integer 1 Big
// X Y Poly Lines
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// -------------------------------------------------------
bbWriter.Write(fid + 1, false); // Byte 0 Record Number Integer 1 Big
bbWriter.Write(contentLength, false); // Byte 4 Content Length Integer 1 Big
bbWriter.Write((int)Header.ShapeType); // Byte 8 Shape Type 3 Integer 1 Little
if (Header.ShapeType == ShapeType.NullShape)
{
continue;
}
Envelope env = f.Geometry.EnvelopeInternal ?? new Envelope();
bbWriter.Write(env.MinX); // Byte 12 Xmin Double 1 Little
bbWriter.Write(env.MinY); // Byte 20 Ymin Double 1 Little
bbWriter.Write(env.MaxX); // Byte 28 Xmax Double 1 Little
bbWriter.Write(env.MaxY); // Byte 36 Ymax Double 1 Little
bbWriter.Write(parts.Count); // Byte 44 NumParts Integer 1 Little
bbWriter.Write(points.Count); // Byte 48 NumPoints Integer 1 Little
// Byte 52 Parts Integer NumParts Little
foreach (int iPart in parts)
{
bbWriter.Write(iPart);
}
double[] xyVals = new double[points.Count * 2];
for (int ipoint = 0; ipoint < points.Count; ipoint++)
{
//double[] c = points[ipoint];
xyVals[ipoint * 2] = points[ipoint][Ordinate.X];
xyVals[ipoint * 2 + 1] = points[ipoint][Ordinate.Y];
}
bbWriter.Write(xyVals);
if (Header.ShapeType == ShapeType.PolyLineZ)
{
if (f.Geometry.EnvelopeInternal != null)
{
bbWriter.Write(f.Geometry.EnvelopeInternal.Minimum.Z);
bbWriter.Write(f.Geometry.EnvelopeInternal.Maximum.Z);
}
double[] zVals = new double[points.Count];
for (int ipoint = 0; ipoint < points.Count; ipoint++)
{
zVals[ipoint] = points[ipoint].Z;
}
bbWriter.Write(zVals);
}
if (Header.ShapeType == ShapeType.PolyLineM || Header.ShapeType == ShapeType.PolyLineZ)
{
if (f.Geometry.EnvelopeInternal == null)
{
bbWriter.Write(0.0);
bbWriter.Write(0.0);
}
else
{
bbWriter.Write(f.Geometry.EnvelopeInternal.Minimum.M);
bbWriter.Write(f.Geometry.EnvelopeInternal.Maximum.M);
}
double[] mVals = new double[points.Count];
for (int ipoint = 0; ipoint < points.Count; ipoint++)
{
mVals[ipoint] = points[ipoint].M;
}
bbWriter.Write(mVals);
}
fid++;
offset += 4; // header bytes
}
bbWriter.Close();
indexWriter.Close();
offset += contentLength;
//offset += 4;
WriteFileLength(Filename, offset);
WriteFileLength(Header.ShxFilename, 50 + fid * 4);
UpdateAttributes();
SaveProjection();
}
/// <summary>
///
/// </summary>
/// <param name="geom"></param>
/// <param name="parent"></param>
/// <returns></returns>
protected virtual IGeometry TransformLineString(ILineString geom, IGeometry parent)
{
// should check for 1-point sequences and downgrade them to points
return(Factory.CreateLineString(TransformCoordinates(geom.CoordinateSequence, geom)));
}
/// <summary>
/// Creates a new snapper using the points in the given {@link LineString}
/// as target snap points.
/// </summary>
/// <param name="line"></param>
/// <param name="snapTolerance"></param>
public LineStringSnapper(ILineString line, double snapTolerance) :
this(line.Coordinates, snapTolerance)
{
}
public ILineString ReverseTransform(ILineString g)
{
return(new LineString(ReverseTransform(g.Coordinates)));
}
public static void SetOsmId(this ILineString lineString, string id)
{
lineString.UserData = id;
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="file">The stream to read.</param>
/// <param name="geometryFactory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override IGeometry Read(BigEndianBinaryReader file, IGeometryFactory geometryFactory)
{
int shapeTypeNum = file.ReadInt32();
type = (ShapeGeometryType)Enum.Parse(typeof(ShapeGeometryType), shapeTypeNum.ToString());
if (type == ShapeGeometryType.NullShape)
{
return(geometryFactory.CreateMultiLineString(null));
}
if (!(type == ShapeGeometryType.LineString || type == ShapeGeometryType.LineStringM ||
type == ShapeGeometryType.LineStringZ || type == ShapeGeometryType.LineStringZM))
{
throw new ShapefileException("Attempting to load a non-arc as arc.");
}
// Read and for now ignore bounds.
int bblength = GetBoundingBoxLength();
bbox = new double[bblength];
for (; bbindex < 4; bbindex++)
{
double d = file.ReadDouble();
bbox[bbindex] = d;
}
int numParts = file.ReadInt32();
int numPoints = file.ReadInt32();
int[] partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
{
partOffsets[i] = file.ReadInt32();
}
ILineString[] lines = new ILineString[numParts];
for (int part = 0; part < numParts; part++)
{
int start, finish, length;
start = partOffsets[part];
if (part == numParts - 1)
{
finish = numPoints;
}
else
{
finish = partOffsets[part + 1];
}
length = finish - start;
CoordinateList points = new CoordinateList();
points.Capacity = length;
for (int i = 0; i < length; i++)
{
double x = file.ReadDouble();
double y = file.ReadDouble();
ICoordinate external = new Coordinate(x, y);
geometryFactory.PrecisionModel.MakePrecise(external);
points.Add(external);
}
ILineString line = geometryFactory.CreateLineString(points.ToArray());
lines[part] = line;
}
geom = geometryFactory.CreateMultiLineString(lines);
GrabZMValues(file);
return(geom);
}
/// <summary>
///
/// </summary>
/// <param name="geometry"></param>
/// <param name="coordinateSpace">The size needed for each coordinate</param>
/// <returns></returns>
protected int GetByteStreamSize(ILineString geometry, int coordinateSpace)
{
return(GetByteStreamSize(geometry.CoordinateSequence, coordinateSpace));
}
/// <summary>
///
/// </summary>
/// <param name="lineString"></param>
/// <param name="ordinates"></param>
/// <param name="byteOrder">The byte order.</param>
/// <param name="writer"></param>
private void Write(ILineString lineString, Ordinates ordinates, ByteOrder byteOrder, BinaryWriter writer)
{
WriteHeader(PostGisGeometryType.LineString, HandleSRID ? lineString.SRID : -1, ordinates, byteOrder, writer);
Write(lineString.CoordinateSequence, ordinates, writer, false);
}
/// <summary>
///
/// </summary>
/// <param name="line"></param>
/// <returns></returns>
public Edge FindEdge(ILineString line)
{
return _lineEdgeMap[line];
}
/// <summary>
/// Transforms a <see cref="ILineString"/> to an array of <see cref="PointF"/>s.
/// </summary>
/// <param name="self">The linestring</param>
/// <param name="map">The map that defines the affine coordinate transformation</param>
/// <returns>The array of <see cref="PointF"/>s</returns>
public static PointF[] TransformToImage(this ILineString self, MapViewport map)
{
return(TransformToImage(self.Coordinates, map));
}
/// <summary> /// Function that actually renders the linestring /// </summary> /// <param name="map">The map</param> /// <param name="lineString">The line string to symbolize.</param> /// <param name="graphics">The graphics</param> protected abstract void OnRenderInternal(MapViewport map, ILineString lineString, Graphics graphics);
/// <summary>
/// Clips a <see cref="ILineString"/> to the bounding box defined by <see cref="CohenSutherlandLineClipping(double,double,double,double)"/>.
/// </summary>
/// <param name="lineString">The line string to clip</param>
/// <returns>A (possibly multi) line string</returns>
public IMultiLineString ClipLineString(ILineString lineString)
{
//Factory
var factory = lineString.Factory;
//List of line strings that make up the multi line string result
var lineStrings = new List <ILineString>();
//list of clipped vertices for current pass
var clippedVertices = new List <Coordinate>();
//vertices of current line string
var vertices = new List <Coordinate>(lineString.Coordinates);
var count = vertices.Count;
//Compute starting clipcode
double x0, y0;
OutsideClipCodes oc0Initial;
var oc0 = oc0Initial = ComputeClipCode(vertices[0], out x0, out y0);
//Point is inside => add it to the list
if (oc0 == OutsideClipCodes.Inside)
{
clippedVertices.Add(vertices[0]);
}
double x1Old = double.NaN, y1Old = double.NaN;
for (var i = 1; i < count; i++)
{
double x1, y1;
OutsideClipCodes oc1Initial;
var oc1 = oc1Initial = ComputeClipCode(vertices[i], out x1, out y1);
var x1Orig = x1;
var y1Orig = y1;
var accept = false;
while (true)
{
if ((oc0 | oc1) == OutsideClipCodes.Inside)
{
// Bitwise OR is 0. Trivially accept and get out of loop
accept = true;
break;
}
if ((oc0 & oc1) != OutsideClipCodes.Inside)
{
// Bitwise AND is not 0. Trivially reject and get out of loop
break;
}
// failed both tests, so calculate the line segment to clip
// from an outside point to an intersection with clip edge
double x = double.NaN, y = double.NaN;
// At least one endpoint is outside the clip rectangle; pick it.
var ocOut = oc0 != OutsideClipCodes.Inside ? oc0 : oc1;
// Now find the intersection point;
// use formulas y = y0 + slope * (x - x0), x = x0 + (1 / slope) * (y - y0)
if ((ocOut & OutsideClipCodes.Top) == OutsideClipCodes.Top)
{
// point is above the clip rectangle
x = x0 + (x1 - x0) * (_ymax - y0) / (y1 - y0);
y = _ymax;
}
else if ((ocOut & OutsideClipCodes.Bottom) == OutsideClipCodes.Bottom)
{
// point is below the clip rectangle
x = x0 + (x1 - x0) * (_ymin - y0) / (y1 - y0);
y = _ymin;
}
else if ((ocOut & OutsideClipCodes.Right) == OutsideClipCodes.Right)
{
// point is to the right of clip rectangle
y = y0 + (y1 - y0) * (_xmax - x0) / (x1 - x0);
x = _xmax;
}
else if ((ocOut & OutsideClipCodes.Left) == OutsideClipCodes.Left)
{
// point is to the left of clip rectangle
y = y0 + (y1 - y0) * (_xmin - x0) / (x1 - x0);
x = _xmin;
}
// Now we move outside point to intersection point to clip
// and get ready for next pass.
if (oc0 == ocOut)
{
x0 = x;
y0 = y;
oc0 = ComputeClipCode(x, y);
}
else
{
x1 = x;
y1 = y;
oc1 = ComputeClipCode(x, y);
}
}
if (accept)
{
if (oc0Initial != oc0)
{
clippedVertices.Add(new Coordinate(x0, y0));
}
if (x1Old != x1 || y1Old != y1)
{
clippedVertices.Add(new Coordinate(x1, y1));
}
if (oc1Initial != OutsideClipCodes.Inside)
{
if (clippedVertices.Count > 0)
{
lineStrings.Add(factory.CreateLineString(clippedVertices.ToArray()));
clippedVertices = new List <Coordinate>();
}
}
}
x0 = x1Old = x1Orig;
y0 = y1Old = y1Orig;
oc0 = oc0Initial = oc1Initial;
}
if (clippedVertices.Count > 0)
{
lineStrings.Add(factory.CreateLineString(clippedVertices.ToArray()));
}
return(factory.CreateMultiLineString(lineStrings.ToArray()));
}
private static bool HasSameStartAndEndPoint(ILineString lineString1, ILineString lineString2)
{
return((lineString1.StartPoint.Equals(lineString2.StartPoint) && lineString1.EndPoint.Equals(lineString2.EndPoint)) ||
(lineString1.StartPoint.Equals(lineString2.EndPoint) && lineString1.EndPoint.Equals(lineString2.StartPoint)));
}
private void DrawMeasure(Graphics graphics, IGeometry geometry, StringCollection text)
{
string measureUnits = _appSettings.MeasureUnits;
bool inFeet = measureUnits == "feet" || measureUnits == "both";
bool inMeters = measureUnits == "meters" || measureUnits == "both";
System.Drawing.Font font = _appSettings.MeasureFont;
font = new System.Drawing.Font(font.FontFamily, Convert.ToSingle(font.Size * _resolution), font.Style, font.Unit);
SolidBrush brush = new SolidBrush(Color.FromArgb(64, 64, 64));
SolidBrush glowBrush = new SolidBrush(Color.White);
StringFormat format = new StringFormat();
format.Alignment = StringAlignment.Center;
format.LineAlignment = StringAlignment.Center;
double convert = 1 / (_appSettings.MapUnits == "feet" ? 1 : Constants.MetersPerFoot);
switch (geometry.OgcGeometryType)
{
case OgcGeometryType.LineString:
ILineString lineString = (ILineString)geometry;
if (text.Count == 0)
{
double d;
if (_appSettings.MapCoordinateSystem.Equals(_appSettings.MeasureCoordinateSystem))
{
d = lineString.Length * convert;
}
else
{
ILineString measureLineString = _appSettings.MapCoordinateSystem.ToGeodetic(lineString);
measureLineString = _appSettings.MeasureCoordinateSystem.ToProjected(measureLineString);
convert = 1 / (_appSettings.MeasureCoordinateSystem.MapUnits == "feet" ? 1 : Constants.MetersPerFoot);
d = measureLineString.Length * convert;
}
if (inFeet)
{
text.Add(d < 5280 ? d.ToString("0") + " ft" : (d / 5280).ToString("0.0") + " mi");
}
if (inMeters)
{
d *= Constants.MetersPerFoot;
text.Add(d < 1000 ? d.ToString("0") + " m" : (d / 1000).ToString("0.0") + " km");
}
}
IPoint p;
double angle;
GetMidpoint(lineString, out p, out angle);
angle = -(angle * 180 / Math.PI);
angle = angle < -90 || 90 < angle ? angle + 180 : angle < 0 ? angle + 360 : angle;
p = _transform.ReverseTransform(p);
float x = Convert.ToSingle(p.Coordinate.X * _resolution);
float y = Convert.ToSingle(p.Coordinate.Y * _resolution);
format.LineAlignment = StringAlignment.Far;
int[] pos = new int[] { 0, 1, 2, 3, 5, 6, 7, 8, 4 };
for (int i = 0; i < 9; ++i)
{
float offsetX = (pos[i] % 3) - 1;
float offsetY = Convert.ToSingle(Math.Floor(pos[i] / 3.0)) - 1;
System.Drawing.Drawing2D.GraphicsState state = graphics.Save();
graphics.TextRenderingHint = System.Drawing.Text.TextRenderingHint.AntiAlias;
graphics.TranslateTransform(x, y);
graphics.RotateTransform(Convert.ToSingle(angle));
graphics.DrawString(text.Join("\n"), font, i < 8 ? glowBrush : brush, Convert.ToSingle(offsetX * _resolution), Convert.ToSingle(offsetY - 3 * _resolution), format);
graphics.Restore(state);
}
break;
case OgcGeometryType.Polygon:
IPolygon polygon = (IPolygon)geometry;
IPoint c = polygon.Centroid;
if (c != null)
{
double a;
if (_appSettings.MapCoordinateSystem.Equals(_appSettings.MeasureCoordinateSystem))
{
a = polygon.Area * convert * convert;
}
else
{
IPolygon measurePolygon = _appSettings.MapCoordinateSystem.ToGeodetic(polygon);
measurePolygon = _appSettings.MeasureCoordinateSystem.ToProjected(measurePolygon);
convert = 1 / (_appSettings.MeasureCoordinateSystem.MapUnits == "feet" ? 1 : Constants.MetersPerFoot);
a = measurePolygon.Area * convert * convert;
}
double acres = a / Constants.SquareFeetPerAcre;
if (inFeet)
{
double squareMile = Constants.FeetPerMile * Constants.FeetPerMile;
text.Add(a <= squareMile ? a.ToString("0") + " sq ft" : (a / squareMile).ToString("0.00") + " sq mi");
}
if (inMeters)
{
a *= Constants.MetersPerFoot * Constants.MetersPerFoot;
text.Add(a <= 100000 ? a.ToString("0") + " sq m" : (a / 1000000).ToString("0.00") + " sq km");
}
if (inFeet)
{
text.Add(acres.ToString("0.00") + " acres");
}
DrawText(graphics, c, text.Join("\n"), font, brush, glowBrush, 0, 0, format);
}
break;
}
}
private void setMinCha(IFeature feature)
{
ILineString minLine = MinPoints.getMinVector(feature);
AngleProperty property = new AngleProperty(feature);
foreach (var line in property.Lines)
{
//int le = line.Intersection(feature.Geometry.Boundary).NumPoints;
//if (le>1)
//{
// for (int i = 0; i < le-1; i++)
// {
// double index = (line.Coordinates[i].Distance(line.Coordinates[i+1]) );
// /* minLine.Coordinates[1]*/
// //-line.Intersection(feature.Geometry).Coordinates[0].Distance(line.Coordinates[1])
// MinCha.Add(index);//最小差
// }
//}
//else
//{
double index = (line.Length);
/* line.Coordinates[1].Distance(line.Coordinates[0]) - line.Intersection(feature.Geometry).Coordinates[0].Distance(line.Coordinates[0])*/
/* minLine.Coordinates[1]*/
MinCha.Add(index);//最小差
//}
}
#region
//ILineString minLine = MinPoints.getMinVector(feature);
//AngleProperty property = new AngleProperty(feature);
//foreach (var line in property.Lines)
//{
// if (line.Intersection(feature.Geometry.Boundary).NumPoints == 2)
// {
// line.Intersection(feature.Geometry.Boundary).Coordinates[0].X -= feature.Geometry.Centroid.Coordinate.X;
// line.Intersection(feature.Geometry.Boundary).Coordinates[0].Y -= feature.Geometry.Centroid.Coordinate.Y;
// line.Intersection(feature.Geometry.Boundary).Coordinates[1].X -= feature.Geometry.Centroid.Coordinate.X;
// line.Intersection(feature.Geometry.Boundary).Coordinates[1].Y -= feature.Geometry.Centroid.Coordinate.Y;
// if (AngleProperty.getAngle(line.Intersection(feature.Geometry.Boundary).Coordinates[0]) > 90 && AngleProperty.getAngle(line.Intersection(feature.Geometry.Boundary).Coordinates[0]) < 270)
// {
// Index index1 = new Index(line.Coordinates[0].Distance(line.Intersection(feature.Geometry.Boundary).Coordinates[1]) - minLine.Coordinates[1].Distance(minLine.Coordinates[0]), "最小差");
// MinCha.Add(index1);
// }
// else if (AngleProperty.getAngle(line.Intersection(feature.Geometry.Boundary).Coordinates[0]) > 0 && AngleProperty.getAngle(line.Intersection(feature.Geometry.Boundary).Coordinates[0]) < 90||AngleProperty.getAngle(line.Intersection(feature.Geometry.Boundary).Coordinates[0])>270&& AngleProperty.getAngle(line.Intersection(feature.Geometry.Boundary).Coordinates[0])<360)
// {
// Index index1 = new Index(line.Coordinates[0].Distance(line.Intersection(feature.Geometry.Boundary).Coordinates[0]) - minLine.Coordinates[1].Distance(minLine.Coordinates[0]), "最小差");
// MinCha.Add(index1);
// }
// }
// else if (line.Intersection(feature.Geometry.Boundary).NumPoints == 1 || line.Intersection(feature.Geometry.Boundary).NumPoints == 0)
// {
// Index index = new Index(line.Coordinates[1].Distance(line.Coordinates[0]) - minLine.Coordinates[1].Distance(minLine.Coordinates[0]), "最小差");
// MinCha.Add(index);
// }
// //else
// //{
// // Console.WriteLine("交点超过三个，请检查小班");
// //}
//}
#endregion
}
private static BaseLabel CreatePathLabel(ILineString line, string text, SizeF textMeasure,
int priority, LabelStyle style, MapViewport map)
{
if (line == null)
{
return(null);
}
var factory = line.Factory;
// Simplify the line for smoother labeling
double avgCharacterSpace = 2d * textMeasure.Width / text.Length * map.PixelWidth;
var simplifier = new NetTopologySuite.Simplify.VWLineSimplifier(line.Coordinates, avgCharacterSpace);
line = factory.CreateLineString(simplifier.Simplify());
var labelLength = textMeasure.Width * map.PixelWidth;
var labelHeight = textMeasure.Height * map.PixelHeight;
var offsetX = style.Offset.X * map.PixelWidth; // positive = increasing measure
var offsetY = style.Offset.Y * map.PixelHeight; // positive = right side of line
var start = 0d;
if (style.HorizontalAlignment == LabelStyle.HorizontalAlignmentEnum.Center)
{
start = line.Length * 0.5 - labelLength * 0.5;
}
else if (style.HorizontalAlignment == LabelStyle.HorizontalAlignmentEnum.Right)
{
start = line.Length - labelLength;
}
start += offsetX;
// Constrain label length
if (labelLength > 0.95 * line.Length && !style.IgnoreLength ||
start + labelLength < 0 || start > line.Length)
{
return(null);
}
// LengthIndexedLine idea courtesy FObermaier
NetTopologySuite.LinearReferencing.LengthIndexedLine lil;
// optimize for detailed lines (eg labelling rivers at continental level)
// ratio and NumPoints based on instinct.... feel free to revise
var mid = start + labelLength / 2.0;
if (labelLength / line.Length < 0.5 && line.NumPoints > 200 && mid >= 0 && mid < line.Length)
{
lil = new NetTopologySuite.LinearReferencing.LengthIndexedLine(line);
var midPt = lil.ExtractPoint(mid);
// extract slightly more than label length to ensure offsetCurve follows line geometry
var halfLen = labelLength * 0.6;
// ensure non-negative indexes constrained to line length (due to special LengthIndexLine functionality)
line = (LineString)lil.ExtractLine(Math.Max(0, mid - halfLen), Math.Min(mid + halfLen, line.Length));
// reset start
lil = new NetTopologySuite.LinearReferencing.LengthIndexedLine(line);
mid = lil.IndexOf(midPt);
start = mid - labelLength / 2.0;
}
// basic extend
var end = start + labelLength;
if (start < 0 || end > line.Length)
{
line = ExtendLine(line,
start <0 ? -1 * start : 0,
end> line.Length ? end - line.Length : 0);
start = 0;
end = start + labelLength;
}
lil = new NetTopologySuite.LinearReferencing.LengthIndexedLine(line);
// reverse
var startPt = lil.ExtractPoint(start);
var endPt = lil.ExtractPoint(end);
if (LineNeedsReversing(startPt, endPt, false, map))
{
start = end;
end = start - labelLength;
}
line = (ILineString)lil.ExtractLine(start, end);
// Build offset curve
ILineString offsetCurve;
var bufferParameters =
new NetTopologySuite.Operation.Buffer.BufferParameters(4,
GeoAPI.Operation.Buffer.EndCapStyle.Flat);
// determine offset curve that will run through the vertical centre of the text
if (style.VerticalAlignment != LabelStyle.VerticalAlignmentEnum.Middle)
{
var ocb = new NetTopologySuite.Operation.Buffer.OffsetCurveBuilder(factory.PrecisionModel,
bufferParameters);
// Left side positive
var offsetCurvePoints = ocb.GetOffsetCurve(line.Coordinates,
((int)style.VerticalAlignment - 1) * 0.5 * labelHeight - offsetY);
offsetCurve = factory.CreateLineString(offsetCurvePoints);
}
else
{
offsetCurve = line;
}
// basic extend
var ratio = labelLength / offsetCurve.Length;
if (ratio > 1.01)
{
var diff = labelLength - offsetCurve.Length;
offsetCurve = ExtendLine(offsetCurve, diff / 2d, diff / 2d);
}
// enclosing polygon in world coords
var affectedArea = (IPolygon)offsetCurve.Buffer(0.5d * labelHeight, bufferParameters);
// fast, basic check (technically should use polygons for rotated views)
if (!map.Envelope.Contains(affectedArea.EnvelopeInternal))
{
return(null);
}
// using labelBox to pass text height to WarpedPath
return(new PathLabel(text, LineStringToPath(offsetCurve, map), 0, priority,
new LabelBox(0, 0, textMeasure.Width, textMeasure.Height), style)
{
AffectedArea = affectedArea
});
}
/// <summary>
/// Determines whether two polylines defined by series of coordinates intersects.
/// </summary>
/// <param name="line1">The first polyline to test.</param>
/// <param name="line2">The second polyline to test.</param>
/// <returns>true if polylines intersets, otherwise false.</returns>
public bool Intersects(ILineString line1, ILineString line2)
{
return(this.GeometryLocator.Intersects(line1.Coordinates, line2.Coordinates));
}
/// <summary>
///
/// </summary>
/// <param name="line"></param>
/// <returns></returns>
public Edge FindEdge(ILineString line)
{
return((Edge)lineEdgeMap[line]);
}
/// <summary>
///
/// </summary>
/// <param name="line"></param>
public PolygonizeEdge(ILineString line)
{
this.line = line;
}
/// <summary>
/// Determines whether specific Coordinate is on the given polyline.
/// </summary>
/// <param name="c">The coordinate to check.</param>
/// <param name="line">The line to check coordinate against.</param>
/// <returns>true if coordinate lies on the polyline, otherwise false.</returns>
public bool IsOnLine(Coordinate c, ILineString line)
{
return(this.GeometryLocator.IsOnLine(c, line.Coordinates));
}
/// <summary>
///
/// </summary>
/// <param name="lineString"></param>
/// <param name="writer"></param>
protected void Write(ILineString lineString, XmlTextWriter writer)
{
writer.WriteStartElement(GMLElements.gmlPrefix, "LineString", GMLElements.gmlNS);
WriteCoordinates(lineString.Coordinates, writer);
writer.WriteEndElement();
}
/// <summary>
/// Converts a <c>LineString</c> to <LineString Tagged Text
/// format, then appends it to the writer.
/// </summary>
/// <param name="lineString">The <c>LineString</c> to process.</param>
/// <param name="level"></param>
/// <param name="writer">The output writer to append to.</param>
private void AppendLineStringTaggedText(ILineString lineString, int level, TextWriter writer)
{
writer.Write("LINESTRING ");
AppendLineStringText(lineString, level, false, writer);
}
private static void CalculateLabelAroundOnLineString(ILineString line, ref BaseLabel label, MapViewport map, System.Drawing.Graphics g, System.Drawing.SizeF textSize)
{
var sPoints = line.Coordinates;
// only get point in enverlop of map
var colPoint = new Collection <PointF>();
var bCheckStarted = false;
//var testEnvelope = map.Envelope.Grow(map.PixelSize*10);
for (var j = 0; j < sPoints.Length; j++)
{
if (map.Envelope.Contains(sPoints[j]))
{
//points[j] = map.WorldToImage(sPoints[j]);
colPoint.Add(map.WorldToImage(sPoints[j]));
bCheckStarted = true;
}
else if (bCheckStarted)
{
// fix bug curved line out of map in center segment of line
break;
}
}
if (colPoint.Count > 1)
{
label.TextOnPathLabel = new TextOnPath();
switch (label.Style.HorizontalAlignment)
{
case LabelStyle.HorizontalAlignmentEnum.Left:
label.TextOnPathLabel.TextPathAlignTop = TextPathAlign.Left;
break;
case LabelStyle.HorizontalAlignmentEnum.Right:
label.TextOnPathLabel.TextPathAlignTop = TextPathAlign.Right;
break;
case LabelStyle.HorizontalAlignmentEnum.Center:
label.TextOnPathLabel.TextPathAlignTop = TextPathAlign.Center;
break;
default:
label.TextOnPathLabel.TextPathAlignTop = TextPathAlign.Center;
break;
}
switch (label.Style.VerticalAlignment)
{
case LabelStyle.VerticalAlignmentEnum.Bottom:
label.TextOnPathLabel.TextPathPathPosition = TextPathPosition.UnderPath;
break;
case LabelStyle.VerticalAlignmentEnum.Top:
label.TextOnPathLabel.TextPathPathPosition = TextPathPosition.OverPath;
break;
case LabelStyle.VerticalAlignmentEnum.Middle:
label.TextOnPathLabel.TextPathPathPosition = TextPathPosition.CenterPath;
break;
default:
label.TextOnPathLabel.TextPathPathPosition = TextPathPosition.CenterPath;
break;
}
var idxStartPath = 0;
var numberPoint = colPoint.Count;
// start Optimzes Path points
var step = 100;
if (colPoint.Count >= step * 2)
{
numberPoint = step * 2;;
switch (label.Style.HorizontalAlignment)
{
case LabelStyle.HorizontalAlignmentEnum.Left:
//label.TextOnPathLabel.TextPathAlignTop = Gisoft.SharpMap.Rendering.TextPathAlign.Left;
idxStartPath = 0;
break;
case LabelStyle.HorizontalAlignmentEnum.Right:
//label.TextOnPathLabel.TextPathAlignTop = Gisoft.SharpMap.Rendering.TextPathAlign.Right;
idxStartPath = colPoint.Count - step;
break;
case LabelStyle.HorizontalAlignmentEnum.Center:
//label.TextOnPathLabel.TextPathAlignTop = Gisoft.SharpMap.Rendering.TextPathAlign.Center;
idxStartPath = (int)colPoint.Count / 2 - step;
break;
default:
//label.TextOnPathLabel.TextPathAlignTop = Gisoft.SharpMap.Rendering.TextPathAlign.Center;
idxStartPath = (int)colPoint.Count / 2 - step;
break;
}
}
// end optimize path point
var points = new PointF[numberPoint];
var count = 0;
if (colPoint[0].X <= colPoint[colPoint.Count - 1].X)
{
for (var l = idxStartPath; l < numberPoint + idxStartPath; l++)
{
points[count] = colPoint[l];
count++;
}
}
else
{
//reverse the path
for (var k = numberPoint - 1 + idxStartPath; k >= idxStartPath; k--)
{
points[count] = colPoint[k];
count++;
}
}
/*
* //get text size in page units ie pixels
* float textheight = label.Style.Font.Size;
* switch (label.Style.Font.Unit)
* {
* case GraphicsUnit.Display:
* textheight = textheight * g.DpiY / 75;
* break;
* case GraphicsUnit.Document:
* textheight = textheight * g.DpiY / 300;
* break;
* case GraphicsUnit.Inch:
* textheight = textheight * g.DpiY;
* break;
* case GraphicsUnit.Millimeter:
* textheight = (float)(textheight / 25.4 * g.DpiY);
* break;
* case GraphicsUnit.Pixel:
* //do nothing
* break;
* case GraphicsUnit.Point:
* textheight = textheight * g.DpiY / 72;
* break;
* }
* var topFont = new Font(label.Style.Font.FontFamily, textheight, label.Style.Font.Style, GraphicsUnit.Pixel);
*/
var topFont = label.Style.GetFontForGraphics(g);
//
var path = new GraphicsPath();
path.AddLines(points);
label.TextOnPathLabel.PathColorTop = System.Drawing.Color.Transparent;
label.TextOnPathLabel.Text = label.Text;
label.TextOnPathLabel.LetterSpacePercentage = 90;
label.TextOnPathLabel.FillColorTop = new System.Drawing.SolidBrush(label.Style.ForeColor);
label.TextOnPathLabel.Font = topFont;
label.TextOnPathLabel.PathDataTop = path.PathData;
label.TextOnPathLabel.Graphics = g;
//label.TextOnPathLabel.ShowPath=true;
//label.TextOnPathLabel.PathColorTop = System.Drawing.Color.YellowGreen;
if (label.Style.Halo != null)
{
label.TextOnPathLabel.ColorHalo = label.Style.Halo;
}
else
{
label.TextOnPathLabel.ColorHalo = null;// new System.Drawing.Pen(label.Style.ForeColor, (float)0.5);
}
path.Dispose();
// MeasureString to get region
label.TextOnPathLabel.MeasureString = true;
label.TextOnPathLabel.DrawTextOnPath();
label.TextOnPathLabel.MeasureString = false;
// Get Region label for CollissionDetection here.
var pathRegion = new GraphicsPath();
if (label.TextOnPathLabel.RegionList.Count > 0)
{
//int idxCenter = (int)label.TextOnPathLabel.PointsText.Count / 2;
//System.Drawing.Drawing2D.Matrix rotationMatrix = g.Transform.Clone();// new Matrix();
//rotationMatrix.RotateAt(label.TextOnPathLabel.Angles[idxCenter], label.TextOnPathLabel.PointsText[idxCenter]);
//if (label.TextOnPathLabel.PointsTextUp.Count > 0)
//{
// for (int up = label.TextOnPathLabel.PointsTextUp.Count - 1; up >= 0; up--)
// {
// label.TextOnPathLabel.PointsText.Add(label.TextOnPathLabel.PointsTextUp[up]);
// }
//}
pathRegion.AddRectangles(label.TextOnPathLabel.RegionList.ToArray());
// get box for detect colission here
label.Box = new LabelBox(pathRegion.GetBounds());
//g.FillRectangle(System.Drawing.Brushes.YellowGreen, label.Box);
}
pathRegion.Dispose();
}
}
public static string GetOsmId(this ILineString lineString)
{
return(lineString.UserData.ToString());
}
private static void WriteLineString(ILineString geometry, PostGis2GeometryHeader pgh, BinaryWriter writer)
{
writer.Write((uint)PostGis2GeometryType.LineString);
WriteSequence(geometry.CoordinateSequence, pgh, writer, -1);
}
private IGeometry PrimitiveCoordinateMapper(IGeometry geom)
{
if (geom is IPoint)
{
return(new Topology.Geometries.Point(PrimitiveCoordinateMapper(geom.Coordinates)[0]));
}
else if (geom is IMultiPoint)
{
IGeometry[] input = (geom as IMultiLineString).Geometries;
IPoint[] output = new IPoint[input.Length];
for (int i = 0; i < input.Length; i++)
{
output[i] = (IPoint)PrimitiveCoordinateMapper(input[i]);
}
return(new MultiPoint(output));
}
else if (geom is ILineString)
{
return(new LineString(PrimitiveCoordinateMapper(geom.Coordinates)));
}
else if (geom is ILinearRing)
{
return(new LinearRing(PrimitiveCoordinateMapper(geom.Coordinates)));
}
else if (geom is IMultiLineString)
{
IGeometry[] input = (geom as IMultiLineString).Geometries;
ILineString[] output = new ILineString[input.Length];
for (int i = 0; i < input.Length; i++)
{
output[i] = (ILineString)PrimitiveCoordinateMapper(input[i]);
}
return(new MultiLineString(output));
}
else if (geom is IPolygon)
{
ILineString shell = (ILineString)PrimitiveCoordinateMapper(((IPolygon)geom).Shell);
ILineString[] input = (geom as IPolygon).Holes;
ILinearRing[] output = new ILinearRing[input.Length];
for (int i = 0; i < input.Length; i++)
{
output[i] = new LinearRing(((ILineString)PrimitiveCoordinateMapper(input[i])).Coordinates);
}
return(new Polygon(new LinearRing(shell.Coordinates), output));
}
else if (geom is IMultiPolygon)
{
IGeometry[] input = (geom as IMultiPolygon).Geometries;
IPolygon[] output = new IPolygon[input.Length];
for (int i = 0; i < input.Length; i++)
{
output[i] = (IPolygon)PrimitiveCoordinateMapper(input[i]);
}
return(new MultiPolygon(output));
}
else if (geom is IGeometryCollection)
{
IGeometry[] input = (geom as IGeometryCollection).Geometries;
IGeometry[] output = new IGeometry[input.Length];
for (int i = 0; i < input.Length; i++)
{
output[i] = PrimitiveCoordinateMapper(input[i]);
}
return(new GeometryCollection(output));
}
else
{
return(null);
}
}
/// <summary>
/// Converts a <see cref="ILineString"/> to a <see cref="GeoAPILineString"/>
/// </summary>
/// <param name="self">The <see cref="ILineString"/> to convert</param>
/// <param name="factory">The factory to create the <see cref="GeoAPILineString"/></param>
/// <param name="setUserData">Sets the <see cref="GeoAPIGeometry.UserData"/> to <paramref name="self"/>.UserData</param>
/// <returns>The converted geometry</returns>
public static GeoAPILineString ToGeoAPI(this ILineString self, GeoAPIGeometryFactory factory = null, bool setUserData = false)
{
var useFactory = factory ?? self.Factory.ToGeoAPI();
return(FromLineString(self, useFactory, setUserData));
}