private void polylineMiddleLine(CRailwayProject rw, IColor66 lineColor, SGWorld66 sgworld, string branch)
{
ITerrainPolyline66 polyline;
//double[] x, y, z, dir;
double[] mArray;
int count = rw.getSubLine(out mArray);
//mSceneData.mMiddleLines.getSubLineByDKCode(rw.Mileage_Start_Discription, rw.Mileage_End_Discription, 10, out x, out y, out z, out dir);
//double[] mArray = new double[count * 3];
//for (int i = 0; i < count; i++)
//{
// mArray[3 * i] = x[i];
// mArray[3 * i + 1] = y[i];
// mArray[3 * i + 2] = z[i] + 1;
//}
if (count > 1)
{
polyline = sgworld.Creator.CreatePolylineFromArray(mArray, lineColor, AltitudeTypeCode.ATC_TERRAIN_ABSOLUTE, branch, rw.ProjectName);
polyline.Spline = true;
polyline.Visibility.MaxVisibilityDistance = 10000000;
polyline.Visibility.MinVisibilityDistance = 1000;
polyline.LineStyle.Width = -5.0;
polyline.Visibility.Show = true;
}
}
/// <summary>
/// 路径漫游
/// </summary>
private void RouteRoam()
{
//绘制路径
double[] cVerticesArray = null;
cVerticesArray = new double[] {
116.35, 27.98, 0,
116.45, 28.98, 0,
116.45, 28.11, 0,
116.65, 28.45, 0,
};
ILineString pILineString = sgWorld.Creator.GeometryCreator.CreateLineStringGeometry(cVerticesArray);
IColor66 color = sgWorld.Creator.CreateColor(255, 0, 0, 125);
var polyline = sgWorld.Creator.CreatePolyline(pILineString, color);
var dynamicObject = this.sgWorld.Creator.CreateDynamicObject(0, DynamicMotionStyle.MOTION_GROUND_VEHICLE, DynamicObjectType.DYNAMIC_IMAGE_LABEL, @"F:\项目管理\智慧抚州\使用的Fly\data11\汽车图标\整车.png", 50, AltitudeTypeCode.ATC_TERRAIN_RELATIVE, "", "动态对象");
var wayPoint1 = this.sgWorld.Creator.CreateRouteWaypoint(116.35, 27.98, 0, 2000);
var wayPoint2 = this.sgWorld.Creator.CreateRouteWaypoint(116.45, 28.98, 0, 2000);
var wayPoint3 = this.sgWorld.Creator.CreateRouteWaypoint(116.55, 28.11, 0, 800);
var wayPoint4 = this.sgWorld.Creator.CreateRouteWaypoint(116.65, 28.45, 0, 800);
dynamicObject.Waypoints.AddWaypoint(wayPoint1);
dynamicObject.Waypoints.AddWaypoint(wayPoint2);
dynamicObject.Waypoints.AddWaypoint(wayPoint3);
dynamicObject.Waypoints.AddWaypoint(wayPoint4);
dynamicObject.CircularRoute = false;
dynamicObject.RestartRoute(0);
//dynamicObject.MoveByTime = true;
sgWorld.Navigate.FlyTo(dynamicObject.ID, ActionCode.AC_JUMP);
}
private void createLabelWithProject()
{
string[] sProjType = new string[] { "路基", "涵洞", "特大桥", "大桥", "中桥", "框构桥", "空心板桥梁", "预制", "铺架" };//, "大临", "站房工程"
var sgworld = new SGWorld66();
IColor66 bgcolor = sgworld.Creator.CreateColor(255, 255, 255, 155);
IColor66 forecolor = sgworld.Creator.CreateColor(0, 0, 0, 255);
ILabelStyle66 cLabelStyle = sgworld.Creator.CreateLabelStyle(SGLabelStyle.LS_DEFAULT);
{
//uint nBGRValue = 0x00000000; // White
//var cBackgroundColor = cLabelStyle.BackgroundColor; // Get label style background color
//cBackgroundColor.FromBGRColor(nBGRValue); // Set background to blue
//cBackgroundColor.SetAlpha(0.8); // Set transparency to 50%
cLabelStyle.BackgroundColor = bgcolor; // Set label style background color
cLabelStyle.TextColor = forecolor;
cLabelStyle.FontName = "Arial"; // Set font name to Arial
cLabelStyle.Italic = true; // Set label style font to italic
cLabelStyle.Scale = 3; // Set label style scale
cLabelStyle.TextOnImage = false;
}
var branch = sgworld.ProjectTree.CreateGroup("桥梁");
foreach (string str in sProjType)
{
createOneProjectBranch(str, cLabelStyle);
}
}
/// <summary>
/// 创建箭头
/// </summary>
private void CreateArrow()
{
var cPos = CreatePosition();
double length = 1000;
int style = 4;
IColor66 lineColor = this.sgWorld.Creator.CreateColor(255, 0, 0, 0);
IColor66 fillColor = this.sgWorld.Creator.CreateColor(255, 0, 0, 0);
string groupID = string.Empty;
string description = "箭头→";
var arrow = this.sgWorld.Creator.CreateArrow(cPos, length, style, lineColor, fillColor, groupID, description);
this.sgWorld.Navigate.FlyTo(arrow, ActionCode.AC_FLYTO);
}
public override void TECreate()
{
SGWorld66 sgworld = new SGWorld66();
if (string.IsNullOrEmpty(mGroupIDStatic))
{
mGroupIDStatic = sgworld.ProjectTree.CreateGroup("MiddleLine");
}
IColor66 lineColorGreen = sgworld.Creator.CreateColor(0, 255, 0, 255); //工点进度前20%
IColor66 lineColorYellow = sgworld.Creator.CreateColor(255, 255, 0, 255); //工点进度前60%
IColor66 lineColorRed = sgworld.Creator.CreateColor(255, 0, 0, 255); //工点进度前20%
IColor66 lineColorGray = sgworld.Creator.CreateColor(100, 100, 100, 255); //未施工
List <CRailwayProject> items = new List <CRailwayProject> (mSceneData.mBridgeList);
items.AddRange(mSceneData.mRoadList);
items.AddRange(mSceneData.mTunnelList);
IEnumerable <CRailwayProject> itemsOrderAsc = items.OrderBy(p => p, new CRWProjectCompares());
int number = 0;
int start = 1;
foreach (CRailwayProject rw in itemsOrderAsc)
{
if (rw.AvgProgress == 0)
{
number++;
polylineMiddleLine(rw, lineColorGray, sgworld, mGroupIDStatic);
}
else
{
int end = (itemsOrderAsc.Count() - number);
if (start <= (int)(end * 0.2))
{
start++;
polylineMiddleLine(rw, lineColorRed, sgworld, mGroupIDStatic);
}
else if ((start >= (int)(end * 0.2 + 1)) & (start <= (int)(end * 0.6)))
{
start++;
polylineMiddleLine(rw, lineColorYellow, sgworld, mGroupIDStatic);
}
else if ((start <= (int)(end * 0.6 + 1)) & (start <= end))
{
start++;
polylineMiddleLine(rw, lineColorGreen, sgworld, mGroupIDStatic);
}
}
}
}
/// <summary>
/// 创建圆
/// </summary>
private void CreateCircle()
{
string msg = string.Empty;
IPosition66 cPos = null;
IColor66 cFillColor = null;
ITerrainRegularPolygon66 cCircle = null;
ITerraExplorerMessage66 cMessage = null;
try
{
cPos = CreatePosition();
uint nLineColor = 0xFFFF0000;
double dCircleRadius = 200;
cCircle = this.sgWorld.Creator.CreateCircle(cPos, dCircleRadius, nLineColor, cFillColor, string.Empty, "Circle");
double dNewCircleRadius = 300;
double dCurrentCircleRadius = cCircle.Radius;
cCircle.Radius = dNewCircleRadius;
uint nRGB_Red = 0xFF0000;
double dAlpha = 0.2;
var cFillStyle = cCircle.FillStyle;
cFillStyle.Color.FromRGBColor(nRGB_Red);
cFillStyle.Color.SetAlpha(dAlpha);
MsgTargetPosition eMsgTarget = MsgTargetPosition.MTP_POPUP;
string tMessage = "Hello Circle";
MsgType eMsgType = MsgType.TYPE_TEXT;
bool bIsBringToFront = true;
cMessage = this.sgWorld.Creator.CreateMessage(eMsgTarget, tMessage, eMsgType, bIsBringToFront);
cCircle.Message.MessageID = cMessage.ID;
var cFlyToPos = cPos.Copy();
cFlyToPos.Pitch = -89.0;
this.sgWorld.Navigate.FlyTo(cFlyToPos, ActionCode.AC_FLYTO);
}
catch (Exception ex)
{
msg = String.Format("CreateCircleButton_Click Exception: {0}", ex.Message);
MessageBox.Show(msg);
}
}
public Facet(ref SGWorld66 inSgworld, TsData tsData, string facetName, string parentGroupID, IColor66 lineColor, IColor66 fillColor)
{
this.sgworld = inSgworld;
this.FacetName = facetName;
this.FillColor = fillColor;
this.LineColor = lineColor;
foreach (var triLink in tsData.TriLinksList)
{
int intA = triLink.VertexA - 1;
int intB = triLink.VertexB - 1;
int intC = triLink.VertexC - 1;
var vList = new List <double>
{
tsData.VerticesList[intA].X,
tsData.VerticesList[intA].Y,
tsData.VerticesList[intA].Z,
tsData.VerticesList[intB].X,
tsData.VerticesList[intB].Y,
tsData.VerticesList[intB].Z,
tsData.VerticesList[intC].X,
tsData.VerticesList[intC].Y,
tsData.VerticesList[intC].Z,
tsData.VerticesList[intA].X,
tsData.VerticesList[intA].Y,
tsData.VerticesList[intA].Z
};
// 三角面片的三个顶点坐标列表
var ring = this.sgworld.Creator.GeometryCreator.CreateLinearRingGeometry(vList.ToArray());
this.ringsList.Add(ring);
}
this.GroupID = this.sgworld.ProjectTree.CreateLockedGroup(facetName, parentGroupID);
}
private void polylineMiddleLine(CRailwayProject rw, SGWorld66 sgworld, string branch, Dictionary <string, double> m)
{
ITerrainPolyline66 polyline1;
ITerrainPolyline66 polyline2;
ITerrainPolyline66 polyline3;
ITerrainPolyline66 polyline4;
IColor66 lineColor1 = sgworld.Creator.CreateColor(242, 174, 17, 255);
IColor66 lineColor2 = sgworld.Creator.CreateColor(32, 183, 81, 255);
IColor66 lineColor3 = sgworld.Creator.CreateColor(183, 9, 9, 255);
IColor66 lineColor4 = sgworld.Creator.CreateColor(50, 50, 50, 255);
double[] x, y, z, dir;
int count = mSceneData.mMiddleLines.getSubLineByDKCode(rw.Mileage_Start_Discription, rw.Mileage_End_Discription, 10, out x, out y, out z, out dir);
double[] mArray1 = new double[count * 3];
double[] mArray2 = new double[count * 3];
double[] mArray3 = new double[count * 3];
double[] mArray4 = new double[count * 3];
for (int i = 0; i < count; i++)
{
mArray1[3 * i] = x[i];
mArray1[3 * i + 1] = y[i];
mArray1[3 * i + 2] = z[i] + 10;
mArray2[3 * i] = x[i];
mArray2[3 * i + 1] = y[i];
mArray2[3 * i + 2] = z[i] + 20;
mArray3[3 * i] = x[i];
mArray3[3 * i + 1] = y[i];
mArray3[3 * i + 2] = z[i] + 30;
mArray4[3 * i] = x[i];
mArray4[3 * i + 1] = y[i];
mArray4[3 * i + 2] = z[i] + 40;
}
if (m.Count >= 4)
{
KeyValuePair <string, double> kvp = m.ElementAt(0);
polyline1 = sgworld.Creator.CreatePolylineFromArray(mArray1, lineColor1, AltitudeTypeCode.ATC_TERRAIN_ABSOLUTE, branch, rw.ProjectName + "-" + kvp.Key);
polyline1.Spline = true;
polyline1.Visibility.MaxVisibilityDistance = 10000000;
polyline1.Visibility.MinVisibilityDistance = 150;
polyline1.LineStyle.Width = 50.0;
polyline1.Visibility.Show = true;
polyline1.LineStyle.Color.SetAlpha(kvp.Value);
kvp = m.ElementAt(1);
polyline2 = sgworld.Creator.CreatePolylineFromArray(mArray2, lineColor2, AltitudeTypeCode.ATC_TERRAIN_ABSOLUTE, branch, rw.ProjectName + "-" + kvp.Key);
polyline2.Spline = true;
polyline2.Visibility.MaxVisibilityDistance = 10000000;
polyline2.Visibility.MinVisibilityDistance = 150;
polyline2.LineStyle.Width = 30.0;
polyline2.Visibility.Show = true;
polyline2.LineStyle.Color.SetAlpha(kvp.Value);
kvp = m.ElementAt(2);
polyline3 = sgworld.Creator.CreatePolylineFromArray(mArray3, lineColor3, AltitudeTypeCode.ATC_TERRAIN_ABSOLUTE, branch, rw.ProjectName + "-" + kvp.Key);
polyline3.Spline = true;
polyline3.Visibility.MaxVisibilityDistance = 10000000;
polyline3.Visibility.MinVisibilityDistance = 150;
polyline3.LineStyle.Width = 15.0;
polyline3.Visibility.Show = true;
polyline3.LineStyle.Color.SetAlpha(kvp.Value);
kvp = m.ElementAt(3);
polyline4 = sgworld.Creator.CreatePolylineFromArray(mArray4, lineColor4, AltitudeTypeCode.ATC_TERRAIN_ABSOLUTE, branch, rw.ProjectName + "-" + kvp.Key);
polyline4.Spline = true;
polyline4.Visibility.MaxVisibilityDistance = 10000000;
polyline4.Visibility.MinVisibilityDistance = 150;
polyline4.LineStyle.Width = 5;
polyline4.Visibility.Show = true;
polyline4.LineStyle.Color.SetAlpha(kvp.Value);
}
}
/// <summary>
/// 生成曲面
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void buttonXBuild_Click(object sender, EventArgs e)
{
double attitudeL = this.doubleInputAttitudeLength.Value;
double shapeR = this.doubleInputShapeRadium.Value;
// 生成产状数据集
double nx = 0.0, ny = 0.0, nz = 0.0;
List <Point> sourceAttitudePoints = new List <Point>(this.targetMarkersList.Count * 4);
foreach (var marker in this.targetMarkersList)
{
nx += Math.Sin(marker.MyDip * Math.PI / 180) * Math.Sin(marker.MyAngle * Math.PI / 180)
/ this.targetMarkersList.Count;
ny += Math.Cos(marker.MyDip * Math.PI / 180) * Math.Sin(marker.MyAngle * Math.PI / 180)
/ this.targetMarkersList.Count;
nz += Math.Cos(marker.MyAngle * Math.PI / 180) / this.targetMarkersList.Count;
double dx = -Math.Tan(marker.MyAngle * Math.PI / 180) * Math.Cos(marker.MyDip * Math.PI / 180);
double dy = -Math.Tan(marker.MyAngle * Math.PI / 180) * Math.Sin(marker.MyDip * Math.PI / 180);
Point northPoint = new Point(
marker.X,
marker.Y + attitudeL,
marker.Z + dy * attitudeL);
Point southPoint = new Point(
marker.X,
marker.Y - attitudeL,
marker.Z - dy * attitudeL);
Point eastPoint = new Point(
marker.X + attitudeL,
marker.Y,
marker.Z + dx * attitudeL);
Point westPoint = new Point(
marker.X - attitudeL,
marker.Y,
marker.Z - dx * attitudeL);
sourceAttitudePoints.AddRange(new[] { northPoint, southPoint, eastPoint, westPoint });
}
Point middlePoint = CurveAlgorithm.MiddlePointOfPoints(this.targetMarkersList);
// 平均产状平面
Vector3D n = new Vector3D(nx, ny, nz);
var plane = new MathNet.Spatial.Euclidean.Plane(
new Point3D(middlePoint.X, middlePoint.Y, middlePoint.Z),
n.Normalize());
double a0 = -plane.D / plane.C;
double a1 = -plane.A / plane.C;
double a2 = -plane.B / plane.C;
// 插值点数据集
List <Point> sourcePoints = new List <Point>(this.targetMarkersList);
sourcePoints.AddRange(sourceAttitudePoints);
SurfaceEquation surfaceEquation = new SurfaceEquation(a0, a1, a2, sourcePoints, shapeR);
// 确定曲面区域
List <Point> edgePoints = CurveAlgorithm.GetEdgePoints(sourcePoints, this.GridEdgeLength);
// 区域内插加密点 GeoHelper.InsertPointsInPolygon
List <Point> pointsList = GeoHelper.InsertPointsInPolygon(edgePoints, this.GridEdgeLength);
// 生成网格 Triangulations
Triangulations tris = new Triangulations(pointsList, new List <Point>());
// 计算插值 SurfaceMesh
tris.MeshSurface(surfaceEquation);
// 绘制曲面
IColor66 fillColor = this.sgworld.Creator.CreateColor(128, 128, 128, 128);
IColor66 lineColor = this.sgworld.Creator.CreateColor(255, 255, 255, 0);
var parentGid = GeoHelper.CreateGroup("产状地质曲面", ref this.sgworld);
Facet facet = new Facet(ref this.sgworld, tris.TsData, "Test", parentGid, lineColor, fillColor);
// facet.DrawFacet();
// 保存三角网结果
TsFile ts = new TsFile(
tris.TsData,
"TSurf",
"M",
"JGM",
"Name",
new List <string>());
ts.WriteTsFile();
ts.UpdateTsFile(ref this.db);
ToastNotification.Show(this, "曲面模型已保存为模型部件", 2500, eToastPosition.MiddleCenter);
}