private static void TakePhotoTp5(SWSDataContext db, GuangDaiService.CorePlatformWebServiceClient ws, int stationId, string wscid)
{
// List<control_command> commands = db.control_command.Where(c => c.station_id == stationId && c.tp.Trim() == "5" && c.state == 0).ToList();
List <control_command> commands = db.ExecuteQuery <control_command>("SELECT * FROM dbo.control_command WHERE station_id=" + stationId + " AND state=0 AND tp='5'").ToList();
foreach (control_command command in commands)
{
if (command.COUNT == null)
{
command.COUNT = 0;
}
try
{
gong_kuang_config gongkuang = db.gong_kuang_config.SingleOrDefault(c => c.id == command.gong_kuang_id);
if (gongkuang == null) //如果找不到command对应和gongkuangid,则把这条command标记为执行失败。
{
LogMg.AddError("找不到控制命令所对应的工况配置信息");
command.execute_result = 0; //标记为执行失败
command.state = 1; // 就当已经执行过
command.execute_comment = "执行失败,找不到控制命令所对应的工况配置信息";
command.complete_datetime = DateTime.Now;
db.SubmitChanges();
continue;
}
byte address = (byte)gongkuang.address;
GuangDaiService.config config = ws.doConfig(wscid, Convert.ToInt32(gongkuang.write_register), (int)command.read_or_write, Convert.ToInt32(command.value), "");
LogMg.AddDebug(String.Format(" ws.doConfig({0},{1}, {2}, {3}, {4}) 返回结果是 result={5} value={6} message={7} ", wscid, gongkuang.write_register, command.read_or_write, "-1", "", config.result, config.value, config.message));
command.state = 1; //标志为已发送
if (config.result == true)
{
command.execute_result = 1; //标记为执行成功
command.execute_comment = "执行写操作成功";
gongkuang.write_value = command.value;
gongkuang.execute_comment = "执行写操作成功";
}
else
{
command.execute_result = 0; //标记为执行失败
command.execute_comment = "执行广岱拍照操作失败";
gongkuang.execute_comment = "执行广岱拍照操作失败";
}
gongkuang.execute_datetime = DateTime.Now;
command.complete_datetime = DateTime.Now;
}
catch (Exception ex)
{
command.execute_result = 0; //标记为执行失败
command.execute_comment = "执行广岱拍照操作失败,服务程序出现了异常";
// MessageQueue.Enqueue_DataInfo(string.Format("接收时间:【{0}】,站点：{1}, 执行工况配置失败.程序出现异常,请查看日志. ", DateTime.Now, station.name));
LogMg.AddError(ex);
}
finally
{
command.complete_datetime = DateTime.Now;
}
try
{
db.SubmitChanges();
}
catch (Exception ex)
{
LogMg.AddError(ex.ToString());
}
}
}
private static void ExecuteGuangDaiOrder(object state)
{
try
{
Args arg = (Args)state;
SWSDataContext db = new SWSDataContext(ConnectStringHelper.GetConnection(SysConfig.userProfile.DbAddress, arg.dbName, SysConfig.userProfile.DbUserName, SysConfig.userProfile.DbPassword));
GuangDaiService.CorePlatformWebServiceClient ws = new GuangDaiService.CorePlatformWebServiceClient(arg.gdServerCfg);
SWS_DBDataContext SWS_DB = new SWS_DBDataContext(ConnectStringHelper.GetConnection(SysConfig.userProfile.DbAddress, SysConfig.userProfile.DbName, SysConfig.userProfile.DbUserName, SysConfig.userProfile.DbPassword));
List <guangdai_station_link> links = SWS_DB.guangdai_station_link.ToList();
String wscid = getWscId(arg, db, links);
if (String.IsNullOrEmpty(wscid))
{
LogMg.AddDebug("站点id=" + arg.station_id + " 找不到对应的wscId");
return;
}
//把那些不需要执行了的数据 state设置为1， 就当这行指令已经执行过了
List <int> giveUpCommands = db.ExecuteQuery <int>("SELECT id FROM dbo.control_command WHERE station_id=" + arg.station_id + " AND (state=0 OR state IS NULL) AND id NOT IN (SELECT MAX(id) FROM dbo.control_command WHERE station_id=" + arg.station_id + " AND (state=0 OR state IS NULL) GROUP BY gong_kuang_id,read_or_write) ").ToList();
if (giveUpCommands.Count > 0)
{
db.ExecuteCommand("UPDATE dbo.control_command SET state=1 WHERE id in(" + string.Join(", ", giveUpCommands) + ")");
}
//db.ExecuteCommand("UPDATE dbo.control_command SET state=1 WHERE station_id=" + arg.station_id + " AND (state=0 OR state IS NULL) AND id NOT IN (SELECT MAX(id) FROM dbo.control_command WHERE station_id=" + arg.station_id + " AND (state=0 OR state IS NULL) GROUP BY gong_kuang_id,read_or_write) ");
//获取需要执行的指令
List <control_command> commands = db.ExecuteQuery <control_command>("SELECT * FROM dbo.control_command WHERE id IN(SELECT MAX(id) as id FROM dbo.control_command WHERE station_id=" + arg.station_id + " AND communication_mode=4 AND tp is NULL AND (state=0 OR state IS NULL) GROUP BY gong_kuang_id,read_or_write) ORDER BY add_datetime").ToList();
TakePhotoTp5(db, ws, arg.station_id, wscid);
for (int i = 0; i < commands.Count; i++)
{
control_command command = commands[i];
if (command.COUNT == null)
{
command.COUNT = 0;
}
try
{
gong_kuang_config gongkuang = db.gong_kuang_config.SingleOrDefault(c => c.id == command.gong_kuang_id);
if (gongkuang == null) //如果找不到command对应和gongkuangid,则把这条command标记为执行失败。
{
LogMg.AddError("找不到控制命令所对应的工况配置信息");
command.execute_result = 0; //标记为执行失败
command.state = 1; // 就当已经执行过
command.execute_comment = "执行失败,找不到控制命令所对应的工况配置信息";
command.complete_datetime = DateTime.Now;
db.SubmitChanges();
continue;
}
if (command.read_or_write == 0) //读读读读读读读读读读读
{
GuangDaiService.config config = ws.doConfig(wscid, Convert.ToInt32(gongkuang.read_register), (int)command.read_or_write, -1, "");
command.state = 1; //标志为已发送
if (config.result == true)
{
command.execute_result = 1; //标记为执行成功
command.value = Convert.ToString(config.value);
command.execute_comment = "执行读取操作成功";
gongkuang.read_value = Convert.ToString(config.value);
gongkuang.execute_comment = "执行读取操作成功";
if (gongkuang.config_type == "05")
{
try
{
test test = db.test.Single(c => c.testid == gongkuang.testid);
double multiple = gongkuang.Multiple == null ? 1 : (double)gongkuang.Multiple;
double addNumber = gongkuang.AddNumber == null ? 0 : (double)gongkuang.AddNumber;
test.value = Convert.ToString(config.value * multiple + addNumber);
//test.value = Convert.ToString(config.value * gongkuang.Multiple + gongkuang.AddNumber);
}
catch (Exception ex)
{
LogMg.AddError(ex);
LogMg.AddDebug("找不到工况对应的检测点，gongkuangid=" + gongkuang.id + " testid=" + gongkuang.testid);
}
}
}
else
{
command.execute_result = 0; //标记为执行失败
command.execute_comment = "执行读取操作失败";
gongkuang.execute_comment = "执行读取操作失败";
}
}
if (command.read_or_write == 1) //写写写写写写写写写写写写写写写
{
GuangDaiService.config config = ws.doConfig(wscid, Convert.ToInt32(gongkuang.write_register), (int)command.read_or_write, Convert.ToInt32(command.value), "");
LogMg.AddDebug(String.Format(" ws.doConfig({0},{1}, {2}, {3}, {4}) 返回结果是 result={5} value={6} message={7} ", wscid, gongkuang.write_register, command.read_or_write, "-1", "", config.result, config.value, config.message));
command.state = 1; //标志为已发送
if (config.result == true)
{
command.execute_result = 1; //标记为执行成功
command.execute_comment = "执行写操作成功";
gongkuang.write_value = command.value;
gongkuang.execute_comment = "执行写操作成功";
}
else
{
command.execute_result = 0; //标记为执行失败
command.execute_comment = "执行写操作失败";
gongkuang.execute_comment = "执行写操作失败";
}
}
gongkuang.execute_datetime = DateTime.Now;
command.complete_datetime = DateTime.Now;
}
catch (Exception ex)
{
command.execute_result = 0; //标记为执行失败
command.execute_comment = "执行命令失败,服务程序出现了异常";
// MessageQueue.Enqueue_DataInfo(string.Format("接收时间:【{0}】,站点：{1}, 执行工况配置失败.程序出现异常,请查看日志. ", DateTime.Now, station.name));
LogMg.AddError(ex);
}
finally
{
command.complete_datetime = DateTime.Now;
}
try
{
db.SubmitChanges();
}
catch (Exception ex)
{
LogMg.AddError(ex.ToString());
}
}
}
catch (Exception ex) { LogMg.AddError(ex); }
}