/// <summary>
/// <para>
/// Return a glyph's ‘control box’. The control box encloses all the outline's points, including Bézier control
/// points. Though it coincides with the exact bounding box for most glyphs, it can be slightly larger in some
/// situations (like when rotating an outline which contains Bézier outside arcs).
/// </para>
/// <para>
/// Computing the control box is very fast, while getting the bounding box can take much more time as it needs
/// to walk over all segments and arcs in the outline. To get the latter, you can use the ‘ftbbox’ component
/// which is dedicated to this single task.
/// </para>
/// </summary>
/// <remarks>
/// <para>
/// Coordinates are relative to the glyph origin, using the y upwards convention.
/// </para>
/// <para>
/// If the glyph has been loaded with <see cref="LoadFlags.NoScale" />, ‘bbox_mode’ must be set to
/// <see cref="GlyphBBoxMode.Unscaled" /> to get unscaled font units in 26.6 pixel format. The value
/// <see cref="GlyphBBoxMode.Subpixels" /> is another name for this constant.
/// </para>
/// <para>
/// If the font is tricky and the glyph has been loaded with <see cref="LoadFlags.NoScale" />, the resulting
/// CBox is meaningless. To get reasonable values for the CBox it is necessary to load the glyph at a large
/// ppem value (so that the hinting instructions can properly shift and scale the subglyphs), then extracting
/// the CBox which can be eventually converted back to font units.
/// </para>
/// <para>
/// Note that the maximum coordinates are exclusive, which means that one can compute the width and height of
/// the glyph image (be it in integer or 26.6 pixels) as:
/// </para>
/// <para>
/// <code>
/// width = bbox.xMax - bbox.xMin;
/// height = bbox.yMax - bbox.yMin;
/// </code>
/// </para>
/// <para>
/// Note also that for 26.6 coordinates, if ‘bbox_mode’ is set to <see cref="GlyphBBoxMode.Gridfit" />, the
/// coordinates will also be grid-fitted, which corresponds to:
/// </para>
/// <para>
/// <code>
/// bbox.xMin = FLOOR(bbox.xMin);
/// bbox.yMin = FLOOR(bbox.yMin);
/// bbox.xMax = CEILING(bbox.xMax);
/// bbox.yMax = CEILING(bbox.yMax);
/// </code>
/// </para>
/// <para>
/// To get the bbox in pixel coordinates, set ‘bbox_mode’ to <see cref="GlyphBBoxMode.Truncate" />.
/// </para>
/// <para>
/// To get the bbox in grid-fitted pixel coordinates, set ‘bbox_mode’ to <see cref="GlyphBBoxMode.Pixels" />.
/// </para>
/// </remarks>
/// <param name="mode">The mode which indicates how to interpret the returned bounding box values.</param>
/// <returns>
/// The glyph coordinate bounding box. Coordinates are expressed in 1/64th of pixels if it is grid-fitted.
/// </returns>
public BBox GetCBox(GlyphBBoxMode mode)
{
if (IsDisposed)
{
throw new ObjectDisposedException("Glyph", "Cannot access a disposed object.");
}
BBox box;
FT.FT_Glyph_Get_CBox(Reference, mode, out box);
return(box);
}
public BBox GetCBox(GlyphBBoxMode mode)
{
if (disposed)
{
throw new ObjectDisposedException("Glyph", "Cannot access a disposed object.");
}
BBoxRec box = new BBoxRec();
FT.FT_Glyph_Get_CBox(Reference, mode, ref box);
return(new BBox(box));
}
internal static extern void FT_Glyph_Get_CBox(IntPtr glyph, GlyphBBoxMode bbox_mode, out BBox acbox);
public static extern void FT_Glyph_Get_CBox(Glyph *glyph, GlyphBBoxMode bbox_mode, out BBox acbox);
public BBox GetCBox(GlyphBBoxMode mode)
{
if (disposed)
throw new ObjectDisposedException("Glyph", "Cannot access a disposed object.");
BBox box;
FT.FT_Glyph_Get_CBox(Reference, mode, out box);
return box;
}
public BBox GetCBox(GlyphBBoxMode mode)
{
if (disposed)
throw new ObjectDisposedException("Glyph", "Cannot access a disposed object.");
IntPtr cboxRef;
FT.FT_Glyph_Get_CBox(Reference, mode, out cboxRef);
return new BBox(cboxRef);
}
internal static extern void FT_Glyph_Get_CBox(IntPtr glyph, GlyphBBoxMode bbox_mode, ref BBoxRec acbox);
public BBox GetCBox(GlyphBBoxMode mode)
{
if (disposed)
throw new ObjectDisposedException("Glyph", "Cannot access a disposed object.");
BBoxRec box = new BBoxRec();
FT.FT_Glyph_Get_CBox(Reference, mode, ref box);
return new BBox(box);
}
/// <summary><para>
/// Return a glyph's ‘control box’. The control box encloses all the outline's points, including Bézier control
/// points. Though it coincides with the exact bounding box for most glyphs, it can be slightly larger in some
/// situations (like when rotating an outline which contains Bézier outside arcs).
/// </para><para>
/// Computing the control box is very fast, while getting the bounding box can take much more time as it needs
/// to walk over all segments and arcs in the outline. To get the latter, you can use the ‘ftbbox’ component
/// which is dedicated to this single task.
/// </para></summary>
/// <remarks><para>
/// Coordinates are relative to the glyph origin, using the y upwards convention.
/// </para><para>
/// If the glyph has been loaded with <see cref="LoadFlags.NoScale"/>, ‘bbox_mode’ must be set to
/// <see cref="GlyphBBoxMode.Unscaled"/> to get unscaled font units in 26.6 pixel format. The value
/// <see cref="GlyphBBoxMode.Subpixels"/> is another name for this constant.
/// </para><para>
/// If the font is tricky and the glyph has been loaded with <see cref="LoadFlags.NoScale"/>, the resulting
/// CBox is meaningless. To get reasonable values for the CBox it is necessary to load the glyph at a large
/// ppem value (so that the hinting instructions can properly shift and scale the subglyphs), then extracting
/// the CBox which can be eventually converted back to font units.
/// </para><para>
/// Note that the maximum coordinates are exclusive, which means that one can compute the width and height of
/// the glyph image (be it in integer or 26.6 pixels) as:
/// </para><para>
/// <code>
/// width = bbox.xMax - bbox.xMin;
/// height = bbox.yMax - bbox.yMin;
/// </code>
/// </para><para>
/// Note also that for 26.6 coordinates, if ‘bbox_mode’ is set to <see cref="GlyphBBoxMode.Gridfit"/>, the
/// coordinates will also be grid-fitted, which corresponds to:
/// </para><para>
/// <code>
/// bbox.xMin = FLOOR(bbox.xMin);
/// bbox.yMin = FLOOR(bbox.yMin);
/// bbox.xMax = CEILING(bbox.xMax);
/// bbox.yMax = CEILING(bbox.yMax);
/// </code>
/// </para><para>
/// To get the bbox in pixel coordinates, set ‘bbox_mode’ to <see cref="GlyphBBoxMode.Truncate"/>.
/// </para><para>
/// To get the bbox in grid-fitted pixel coordinates, set ‘bbox_mode’ to <see cref="GlyphBBoxMode.Pixels"/>.
/// </para></remarks>
/// <param name="mode">The mode which indicates how to interpret the returned bounding box values.</param>
/// <returns>
/// The glyph coordinate bounding box. Coordinates are expressed in 1/64th of pixels if it is grid-fitted.
/// </returns>
public BBox GetCBox(GlyphBBoxMode mode)
{
FT.FT_Glyph_Get_CBox(Reference, mode, out var box);
return(box);
}