Ejemplo n.º 1
0
        public override void AddHoldTiles(Direction direction)
        {
            int dir = GetValueForDirection(direction);

            GalleonHold gHold = AddGalleonHold(new GalleonHold(this, m_HoldItemIDs[dir][0]));

            HoldItem hold1 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][0]));
            HoldItem hold2 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][1]));
            HoldItem hold4 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][2]));
            HoldItem hold5 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][3]));
            HoldItem hold6 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][4]));

            switch (direction)
            {
            case Direction.North:
                hold1.Location = new Point3D(X - 1, Y + 5, Z);
                hold2.Location = new Point3D(X - 1, Y + 4, Z);

                gHold.Location = new Point3D(X, Y + 4, Z);

                hold4.Location = new Point3D(X + 1, Y + 4, Z);
                hold5.Location = new Point3D(X + 1, Y + 5, Z);
                hold6.Location = new Point3D(X, Y + 5, Z);
                break;

            case Direction.South:
                hold1.Location = new Point3D(X + 1, Y - 5, Z);
                hold2.Location = new Point3D(X + 1, Y - 4, Z);

                gHold.Location = new Point3D(X, Y - 4, Z);

                hold4.Location = new Point3D(X - 1, Y - 4, Z);
                hold5.Location = new Point3D(X - 1, Y - 5, Z);
                hold6.Location = new Point3D(X, Y - 5, Z);
                break;

            case Direction.East:
                hold1.Location = new Point3D(X - 5, Y - 1, Z);
                hold2.Location = new Point3D(X - 4, Y - 1, Z);

                gHold.Location = new Point3D(X - 4, Y, Z);

                hold4.Location = new Point3D(X - 4, Y + 1, Z);
                hold5.Location = new Point3D(X - 5, Y + 1, Z);
                hold6.Location = new Point3D(X - 5, Y, Z);
                break;

            case Direction.West:
                hold1.Location = new Point3D(X + 5, Y + 1, Z);
                hold2.Location = new Point3D(X + 4, Y + 1, Z);

                gHold.Location = new Point3D(X + 4, Y, Z);

                hold4.Location = new Point3D(X + 4, Y - 1, Z);
                hold5.Location = new Point3D(X + 5, Y - 1, Z);
                hold6.Location = new Point3D(X + 5, Y, Z);
                break;
            }
        }
Ejemplo n.º 2
0
        public override void AddHoldTiles(Direction direction)
        {
            int dir = GetValueForDirection(direction);

            GalleonHold gHold = AddGalleonHold(new GalleonHold(this, m_HoldItemIDs[dir][0]));

            HoldItem hold1 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][0]));
            HoldItem hold2 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][1]));
            HoldItem hold3 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][2]));
            HoldItem hold4 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][3]));
            HoldItem hold5 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][4]));
            HoldItem hold6 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][5]));
            HoldItem hold7 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][6]));
            HoldItem hold8 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][7]));
            HoldItem hold9 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][8]));

            HoldItem fill1  = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][0]));
            HoldItem fill2  = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][1]));
            HoldItem fill3  = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][2]));
            HoldItem fill4  = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][3]));
            HoldItem fill6  = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][4]));
            HoldItem fill7  = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][5]));
            HoldItem fill8  = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][6]));
            HoldItem fill9  = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][7]));
            HoldItem fill10 = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][8]));
            HoldItem fill11 = AddHoldTile(new HoldItem(GalleonHold, m_FillerIDs[dir][9]));

            switch (direction)
            {
            case Direction.North:
                hold1.Location = new Point3D(X - 1, Y + 8, Z);
                hold2.Location = new Point3D(X, Y + 8, Z);
                hold3.Location = new Point3D(X + 1, Y + 8, Z);
                hold4.Location = new Point3D(X + 1, Y + 7, Z);
                hold5.Location = new Point3D(X, Y + 7, Z);
                hold6.Location = new Point3D(X - 1, Y + 7, Z);
                hold7.Location = new Point3D(X + 1, Y + 6, Z);
                hold8.Location = new Point3D(X - 1, Y + 6, Z);
                hold9.Location = new Point3D(X, Y + 6, Z);

                fill1.Location = new Point3D(X - 2, Y + 8, Z);
                fill2.Location = new Point3D(X - 2, Y + 7, Z);
                fill3.Location = new Point3D(X - 2, Y + 6, Z);
                fill4.Location = new Point3D(X - 2, Y + 5, Z);

                gHold.Location = new Point3D(X, Y + 5, Z);

                fill6.Location  = new Point3D(X - 1, Y + 5, Z);
                fill7.Location  = new Point3D(X + 1, Y + 5, Z);
                fill8.Location  = new Point3D(X + 2, Y + 5, Z);
                fill9.Location  = new Point3D(X + 2, Y + 6, Z);
                fill10.Location = new Point3D(X + 2, Y + 7, Z);
                fill11.Location = new Point3D(X + 2, Y + 8, Z);
                break;

            case Direction.South:
                hold1.Location = new Point3D(X + 1, Y - 8, Z);
                hold2.Location = new Point3D(X, Y - 8, Z);
                hold3.Location = new Point3D(X - 1, Y - 8, Z);
                hold4.Location = new Point3D(X - 1, Y - 7, Z);
                hold5.Location = new Point3D(X, Y - 7, Z);
                hold6.Location = new Point3D(X + 1, Y - 7, Z);
                hold7.Location = new Point3D(X - 1, Y - 6, Z);
                hold8.Location = new Point3D(X + 1, Y - 6, Z);
                hold9.Location = new Point3D(X, Y - 6, Z);

                fill1.Location = new Point3D(X + 2, Y - 8, Z);
                fill2.Location = new Point3D(X + 2, Y - 7, Z);
                fill3.Location = new Point3D(X + 2, Y - 6, Z);
                fill4.Location = new Point3D(X + 2, Y - 5, Z);

                gHold.Location = new Point3D(X, Y - 5, Z);

                fill6.Location  = new Point3D(X + 1, Y - 5, Z);
                fill7.Location  = new Point3D(X - 1, Y - 5, Z);
                fill8.Location  = new Point3D(X - 2, Y - 5, Z);
                fill9.Location  = new Point3D(X - 2, Y - 6, Z);
                fill10.Location = new Point3D(X - 2, Y - 7, Z);
                fill11.Location = new Point3D(X - 2, Y - 8, Z);
                break;

            case Direction.East:
                hold1.Location = new Point3D(X - 8, Y - 1, Z);
                hold2.Location = new Point3D(X - 8, Y, Z);
                hold3.Location = new Point3D(X - 8, Y + 1, Z);
                hold4.Location = new Point3D(X - 7, Y - 1, Z);
                hold5.Location = new Point3D(X - 7, Y, Z);
                hold6.Location = new Point3D(X - 7, Y + 1, Z);
                hold7.Location = new Point3D(X - 6, Y + 1, Z);
                hold8.Location = new Point3D(X - 6, Y - 1, Z);
                hold9.Location = new Point3D(X - 6, Y, Z);

                fill1.Location = new Point3D(X - 8, Y - 2, Z);
                fill2.Location = new Point3D(X - 7, Y - 2, Z);
                fill3.Location = new Point3D(X - 6, Y - 2, Z);
                fill4.Location = new Point3D(X - 5, Y - 2, Z);

                gHold.Location = new Point3D(X - 5, Y, Z);

                fill6.Location  = new Point3D(X - 5, Y - 1, Z);
                fill7.Location  = new Point3D(X - 5, Y + 1, Z);
                fill8.Location  = new Point3D(X - 5, Y + 2, Z);
                fill9.Location  = new Point3D(X - 6, Y + 2, Z);
                fill10.Location = new Point3D(X - 7, Y + 2, Z);
                fill11.Location = new Point3D(X - 8, Y + 2, Z);
                break;

            case Direction.West:
                hold1.Location = new Point3D(X + 8, Y + 1, Z);
                hold2.Location = new Point3D(X + 8, Y, Z);
                hold3.Location = new Point3D(X + 8, Y - 1, Z);
                hold4.Location = new Point3D(X + 7, Y + 1, Z);
                hold5.Location = new Point3D(X + 7, Y, Z);
                hold6.Location = new Point3D(X + 7, Y - 1, Z);
                hold7.Location = new Point3D(X + 6, Y - 1, Z);
                hold8.Location = new Point3D(X + 6, Y + 1, Z);
                hold9.Location = new Point3D(X + 6, Y, Z);

                fill1.Location = new Point3D(X + 8, Y + 2, Z);
                fill2.Location = new Point3D(X + 7, Y + 2, Z);
                fill3.Location = new Point3D(X + 6, Y + 2, Z);
                fill4.Location = new Point3D(X + 5, Y + 2, Z);

                gHold.Location = new Point3D(X + 5, Y, Z);

                fill6.Location  = new Point3D(X + 5, Y + 1, Z);
                fill7.Location  = new Point3D(X + 5, Y - 1, Z);
                fill8.Location  = new Point3D(X + 5, Y - 2, Z);
                fill9.Location  = new Point3D(X + 6, Y - 2, Z);
                fill10.Location = new Point3D(X + 7, Y - 2, Z);
                fill11.Location = new Point3D(X + 8, Y - 2, Z);
                break;
            }
        }
Ejemplo n.º 3
0
        public override void AddHoldTiles(Direction direction)
        {
            int dir = GetValueForDirection(direction);

            GalleonHold gHold = AddGalleonHold(new GalleonHold(this, m_HoldItemIDs[dir][0]));

            HoldItem hold1 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][0]));
            HoldItem hold2 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][1]));
            HoldItem hold3 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][2]));
            HoldItem hold4 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][3]));
            HoldItem hold5 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][4]));
            HoldItem hold6 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][5]));
            HoldItem hold7 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][6]));
            HoldItem hold8 = AddHoldTile(new HoldItem(GalleonHold, m_HoldIDs[dir][7]));

            Static fill1 = AddFillerTile(new Static(m_FillerIDs[dir][0]));
            Static fill2 = AddFillerTile(new Static(m_FillerIDs[dir][1]));
            Static fill3 = AddFillerTile(new Static(m_FillerIDs[dir][2]));

            AddAddonTile(fill2);
            AddAddonTile(fill3);

            switch (direction)
            {
            case Direction.North:
                gHold.Location = new Point3D(X, Y + 8, Z);
                hold1.Location = new Point3D(X + 1, Y + 8, Z);
                hold2.Location = new Point3D(X - 1, Y + 8, Z);
                hold3.Location = new Point3D(X + 1, Y + 9, Z);
                hold4.Location = new Point3D(X - 1, Y + 9, Z);
                hold5.Location = new Point3D(X, Y + 10, Z);
                hold6.Location = new Point3D(X + 1, Y + 10, Z);
                hold7.Location = new Point3D(X - 1, Y + 10, Z);
                hold8.Location = new Point3D(X, Y + 9, Z);

                fill1.Location = new Point3D(X, Y - 3, Z);
                fill2.Location = new Point3D(X, Y + 13, Z);
                fill3.Location = new Point3D(X, Y + 16, Z);
                break;

            case Direction.South:
                gHold.Location = new Point3D(X, Y - 8, Z);
                hold1.Location = new Point3D(X - 1, Y - 8, Z);
                hold2.Location = new Point3D(X + 1, Y - 8, Z);
                hold3.Location = new Point3D(X - 1, Y - 9, Z);
                hold4.Location = new Point3D(X + 1, Y - 9, Z);
                hold5.Location = new Point3D(X, Y - 10, Z);
                hold6.Location = new Point3D(X - 1, Y - 10, Z);
                hold7.Location = new Point3D(X + 1, Y - 10, Z);
                hold8.Location = new Point3D(X, Y - 9, Z);

                fill1.Location = new Point3D(X, Y + 3, Z);
                fill2.Location = new Point3D(X, Y - 13, Z);
                fill3.Location = new Point3D(X, Y - 16, Z);
                break;

            case Direction.East:
                gHold.Location = new Point3D(X - 8, Y, Z);
                hold1.Location = new Point3D(X - 8, Y + 1, Z);
                hold2.Location = new Point3D(X - 8, Y - 1, Z);
                hold3.Location = new Point3D(X - 9, Y + 1, Z);
                hold4.Location = new Point3D(X - 9, Y - 1, Z);
                hold5.Location = new Point3D(X - 10, Y, Z);
                hold6.Location = new Point3D(X - 10, Y + 1, Z);
                hold7.Location = new Point3D(X - 10, Y - 1, Z);
                hold8.Location = new Point3D(X - 9, Y, Z);

                fill1.Location = new Point3D(X + 3, Y, Z);
                fill2.Location = new Point3D(X - 13, Y, Z);
                fill3.Location = new Point3D(X - 16, Y, Z);
                break;

            case Direction.West:
                gHold.Location = new Point3D(X + 8, Y, Z);
                hold1.Location = new Point3D(X + 8, Y - 1, Z);
                hold2.Location = new Point3D(X + 8, Y + 1, Z);
                hold3.Location = new Point3D(X + 9, Y - 1, Z);
                hold4.Location = new Point3D(X + 9, Y + 1, Z);
                hold5.Location = new Point3D(X + 10, Y, Z);
                hold6.Location = new Point3D(X + 10, Y - 1, Z);
                hold7.Location = new Point3D(X + 10, Y + 1, Z);
                hold8.Location = new Point3D(X + 9, Y, Z);

                fill1.Location = new Point3D(X - 3, Y, Z);
                fill2.Location = new Point3D(X + 13, Y, Z);
                fill3.Location = new Point3D(X + 16, Y, Z);
                break;
            }
        }