public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Autodesk.Revit.ApplicationServices.Application app = uiapp.Application;
Document doc = uidoc.Document;
// Access current selection
Selection sel = uidoc.Selection;
// Retrieve elements from database
FilteredElementCollector col
= new FilteredElementCollector(doc)
.WhereElementIsNotElementType()
.OfCategory(BuiltInCategory.OST_StructuralFraming)
.OfClass(typeof(FamilyInstance));
IList <Element> beams = col.ToElements();
ElementId beamCategoryId = beams[0].Category.Id;
SelectionFilter selFilter = new SelectionFilter(beamCategoryId);
// counters
int count_ok = 0;
using (Transaction tx = new Transaction(doc))
{
while (true)
{
tx.Start("Corte de viga");
try
{
// getting elements and family instances
Element beam0 = doc.GetElement(sel.PickObject(ObjectType.Element,
selFilter,
"Selecione a viga primária")
.ElementId);
Element beam1 = doc.GetElement(sel.PickObject(ObjectType.Element,
selFilter,
"Selecione a viga secundária"));
FamilyInstance beam0FamInst = beam0 as FamilyInstance;
FamilyInstance beam1FamInst = beam1 as FamilyInstance;
// assert selected beams are not the same
if (beam0.Id.IntegerValue == beam1.Id.IntegerValue)
{
_ = System.Windows.Forms.MessageBox.Show("Cortar vigas",
"Selecione duas vigas diferentes");
_ = System.Windows.Forms.MessageBox.Show("Cortar vigas - Cortes finalizados",
count_ok + " cortes finalizados com sucesso.");
break;
}
Reference reference;
reference = beam0FamInst.GetReferenceByName("Centro (Frente/Trás)");
if (reference == null)
{
reference = beam0FamInst.GetReferenceByName("Center (Frente/Trás)");
}
if (reference == null)
{
_ = System.Windows.Forms.MessageBox.Show("Não foi encontrada referência central da viga",
"Cortar vigas");
_ = System.Windows.Forms.MessageBox.Show(count_ok + " cortes finalizados com sucesso.",
"Cortar vigas - Cortes finalizados");
}
(beam1 as FamilyInstance).AddCoping(beam0 as FamilyInstance);
if (StructuralFramingUtils.IsEndReferenceValid(beam1FamInst, 0, reference))
{
StructuralFramingUtils.SetEndReference(beam1FamInst, 0, reference);
}
else if (StructuralFramingUtils.IsEndReferenceValid(beam1FamInst, 1, reference))
{
StructuralFramingUtils.SetEndReference(beam1FamInst, 1, reference);
}
else
{
_ = System.Windows.Forms.MessageBox.Show(
"Não há conexão entre as vigas, ou a ordem da conexão não está conforme selecionado.",
"Cortar vigas");
_ = System.Windows.Forms.MessageBox.Show(count_ok + " cortes finalizados com sucesso.",
"Cortar vigas - Cortes finalizados");
break;
}
beam1.get_Parameter(BuiltInParameter.STRUCTURAL_COPING_DISTANCE).Set(_COPE_DISTANCE);
Parameter start_join_cutback = beam1.get_Parameter(BuiltInParameter.START_JOIN_CUTBACK);
if (start_join_cutback != null)
{
start_join_cutback.Set(0);
}
Parameter end_join_cutback = beam1.get_Parameter(BuiltInParameter.END_JOIN_CUTBACK);
if (end_join_cutback != null)
{
end_join_cutback.Set(0);
}
tx.Commit();
count_ok++;
}
catch (Exception)
{
tx.RollBack();
_ = System.Windows.Forms.MessageBox.Show(count_ok + " cortes finalizados com sucesso.",
"Cortar vigas - Cortes finalizados");
break;
}
}
}
return(Result.Succeeded);
}
private bool DoWork(ExternalCommandData commandData,
ref String message, ElementSet elements)
{
if (null == commandData)
{
throw new ArgumentNullException(nameof(commandData));
}
if (null == message)
{
throw new ArgumentNullException(nameof(message));
}
if (null == elements)
{
throw new ArgumentNullException(nameof(elements));
}
ResourceManager res_mng = new ResourceManager(GetType());
ResourceManager def_res_mng = new ResourceManager(typeof(Properties.Resources));
UIApplication ui_app = commandData.Application;
UIDocument ui_doc = ui_app?.ActiveUIDocument;
Application app = ui_app?.Application;
Document doc = ui_doc?.Document;
Selection selection = ui_doc?.Selection;
var tr_name = res_mng.GetString("_transaction_name");
try
{
using (var tr = new Transaction(doc, tr_name))
{
if (TransactionStatus.Started == tr.Start()
)
{
ProjectSettingsStorage pStore = new ProjectSettingsStorage();
ProjectSettings set = pStore.ReadSettings(doc);
ICollection <ElementId> selectedIds = selection.GetElementIds();
ICollection <ElementId> panelIds = new List <ElementId>();
IList <ElementId> elems = new List <ElementId>();
IList <bool> check = new List <bool>();
if (0 == selectedIds.Count)
{
// If no elements selected.
TaskDialog.Show("Revit", "You haven't selected any elements.");
}
else
{
int totalCount = 0;
int currentCount = 0;
int localTotal = 10;
int localCurrent = 0;
String info = "The following assemblies have successfully been created: ";
foreach (ElementId id in selectedIds)
{
Element elem = ui_doc.Document.GetElement(id);
elem.LookupParameter("BIMSF_Container");
//foreach (Parameter pa in elem.Parameters)
//{
//if (pa.Definition.Name == "BIMSF_Container" && pa.AsString() != null && elem.get_Parameter(BuiltInParameter.ASSEMBLY_NAME) == null)
if (elem.LookupParameter("BIMSF_Container") != null && elem.get_Parameter(BuiltInParameter.ASSEMBLY_NAME) == null)
{
panelIds.Add(id);
totalCount += 1;
}
//}
}
ProgressForm pf = new ProgressForm(String.Format("{0} of {1} panels processed", currentCount, totalCount), "Creating wall assembly...", (int)100 / totalCount, (int)100 / localTotal);
string localString = "Creating wall assembly...";
string globalString =
String.Format("{0} of {1} panels processed", currentCount, totalCount);
pf.LabelSet(localString, false, false, globalString, false);
pf.Show();
foreach (ElementId id in panelIds)
{
Element elem = ui_doc.Document.GetElement(id);
//foreach (Parameter pa in elem.Parameters)
//{
Parameter pa = elem.LookupParameter("BIMSF_Container");
if (pa.Definition.Name == "BIMSF_Container" && pa.AsString() != null && elem.get_Parameter(BuiltInParameter.ASSEMBLY_NAME) == null)
{
ElementId ida = new ElementId(pa.Id.IntegerValue);
elems.Clear();
ParameterValueProvider provider = new ParameterValueProvider(ida);
FilterStringRuleEvaluator eval = new FilterStringEquals();
FilterRule rule = new FilterStringRule(provider, eval, elem.get_Parameter(pa.Definition).AsString(), false);
ElementParameterFilter filter = new ElementParameterFilter(rule);
FilteredElementCollector fec = new FilteredElementCollector(ui_doc.Document).WhereElementIsNotElementType().WherePasses(filter);
foreach (Element e in fec)
{
elems.Add(e.Id);
}
FilteredElementCollector fecC = new FilteredElementCollector(doc, elems).OfCategory(BuiltInCategory.OST_StructuralColumns);
FilteredElementCollector fecF = new FilteredElementCollector(doc, elems).OfCategory(BuiltInCategory.OST_StructuralFraming);
ElementId categoryId = doc.GetElement(elems.First()).Category.Id; // use category of one of the assembly elements
if (AssemblyInstance.IsValidNamingCategory(doc, categoryId, elems))
{
TransactionStatus tStat = tr.HasStarted() ? tr.GetStatus() : tr.Start();
pf.LabelSet(localString, true, false, globalString, false);
//IList<Element> el = new List<Element>();
//IList<Element> col = new List<Element>();
ReferenceArray colArray = new ReferenceArray();
ReferenceArray framArray = new ReferenceArray();
colArray.Clear();
framArray.Clear();
AssemblyInstance assemblyInstance = AssemblyInstance.Create(doc, elems, categoryId);
XYZ pt1 = assemblyInstance.GetTransform().BasisZ;
XYZ pt2 = assemblyInstance.GetCenter();
/*el.Clear();
* col.Clear();
*
* foreach (Element co in fecC)
* {
* col.Add(co);
* }*/
foreach (Element fr in fecF)
{
//el.Add(fr);
FamilyInstance fi = fr as FamilyInstance;
framArray.Append(fi.GetReferenceByName("HardSide"));
}
/*foreach (ElementId item in elems)
* {
* if (doc.GetElement(item).Category.Name == "Structural Framing")
* {
* el.Add(doc.GetElement(item));
* FamilyInstance fi = doc.GetElement(item) as FamilyInstance;
* framArray.Append(fi.GetReferenceByName("HardSide"));
* }else if (doc.GetElement(item).Category.Name == "Structural Columns")
* {
* col.Add(doc.GetElement(item));
* }
* }*/
//Element il = el.First();
LocationCurve lc = fecF.FirstElement().Location as LocationCurve;
Curve line = lc.Curve;
XYZ start = line.GetEndPoint(0);
XYZ end = line.GetEndPoint(1);
XYZ v = (end - start);
double angle = v.AngleTo(XYZ.BasisX);
foreach (Element column in fecC)
{
FamilyInstance fi = column as FamilyInstance;
LocationPoint colLc = column.Location as LocationPoint;
double colAngle = colLc.Rotation;
if (Math.Round(colAngle, 2) == Math.Round(angle, 2) || Math.Round(colAngle, 2) == Math.Round(angle + Math.PI, 2) || Math.Round(colAngle, 2) == Math.Round(angle - Math.PI, 2))
{
colArray.Append(fi.GetReferenceByName("HardSide"));
//TaskDialog.Show("HardSide", colAngle + "\n" + angle);
}
else
{
colArray.Append(fi.GetReferenceByName("LeftSide"));
//TaskDialog.Show("Revit",colAngle + "\n" + angle);
}
}
//TaskDialog.Show("Revit", angle.ToString());
Transform trf = Transform.CreateRotationAtPoint(pt1, angle, pt2);
assemblyInstance.SetTransform(trf);
tr.Commit(); // commit the transaction that creates the assembly instance before modifying the instance's name
localCurrent += 1;
localString = "Creating 3D view...";
pf.LabelSet(localString, true, false, globalString, false);
if (tr.GetStatus() == TransactionStatus.Committed)
{
tr.Start("Set Assembly Name");
assemblyInstance.AssemblyTypeName = elem.get_Parameter(pa.Definition).AsString();
info += "\n" + assemblyInstance.AssemblyTypeName;
tr.Commit();
}
if (assemblyInstance.AllowsAssemblyViewCreation()) // create assembly views for this assembly instance
{
if (tr.GetStatus() == TransactionStatus.Committed)
{
tr.Start("View Creation");
View3D view3D = AssemblyViewUtils.Create3DOrthographic(doc, assemblyInstance.Id);
localCurrent += 1;
localString = "Creating elevation view...";
pf.LabelSet(localString, true, false, globalString, false);
View elView = AssemblyViewUtils.CreateDetailSection(doc, assemblyInstance.Id, AssemblyDetailViewOrientation.ElevationFront);
localCurrent += 1;
localString = "Populating elevation view...";
pf.LabelSet(localString, true, false, globalString, false);
TagMode tm = TagMode.TM_ADDBY_CATEGORY;
bool addLead = false;
XYZ center;
TagOrientation to;
foreach (Element co in fecC)
{
to = TagOrientation.Vertical;
LocationPoint cols = co.Location as LocationPoint;
XYZ colPt = cols.Point;
double colX = colPt.X;
double colY = colPt.Y;
ElementId blId = co.get_Parameter(BuiltInParameter.FAMILY_BASE_LEVEL_PARAM).AsElementId();
Level bl = doc.GetElement(blId) as Level;
double zb = bl.Elevation;
double blo = co.get_Parameter(BuiltInParameter.FAMILY_BASE_LEVEL_OFFSET_PARAM).AsDouble();
double bot = zb + blo;
ElementId tlId = co.get_Parameter(BuiltInParameter.FAMILY_TOP_LEVEL_PARAM).AsElementId();
Level tl = doc.GetElement(tlId) as Level;
double zt = tl.Elevation;
double tlo = co.get_Parameter(BuiltInParameter.FAMILY_TOP_LEVEL_OFFSET_PARAM).AsDouble();
double top = zt + tlo;
double zCent = (top + bot) / 2;
center = new XYZ(colX, colY, zCent);
Reference refer = new Reference(co);
IndependentTag.Create(doc, elView.Id, refer, addLead, tm, to, center);
}
foreach (Element fr in fecF)
{
to = TagOrientation.Horizontal;
LocationCurve loc = fr.Location as LocationCurve;
XYZ start2 = loc.Curve.GetEndPoint(0);
XYZ end2 = loc.Curve.GetEndPoint(1);
center = (start2 + end2) / 2;
Reference refer = new Reference(fr);
IndependentTag.Create(doc, elView.Id, refer, addLead, tm, to, center);
}
/*foreach (ElementId eI in elems)
* {
* Element e = doc.GetElement(eI);
*
* if ((BuiltInCategory)e.Category.Id.IntegerValue == BuiltInCategory.OST_StructuralColumns || (BuiltInCategory)e.Category.Id.IntegerValue == BuiltInCategory.OST_StructuralFraming)
* {
* XYZ center;
* TagOrientation to;
* if ((BuiltInCategory)e.Category.Id.IntegerValue == BuiltInCategory.OST_StructuralColumns)
* {
* to = TagOrientation.Vertical;
* LocationPoint cols = e.Location as LocationPoint;
* XYZ colPt = cols.Point;
* double colX = colPt.X;
* double colY = colPt.Y;
* ElementId blId = e.get_Parameter(BuiltInParameter.FAMILY_BASE_LEVEL_PARAM).AsElementId();
* Level bl = doc.GetElement(blId) as Level;
* double zb = bl.Elevation;
* double blo = e.get_Parameter(BuiltInParameter.FAMILY_BASE_LEVEL_OFFSET_PARAM).AsDouble();
* double bot = zb + blo;
*
* ElementId tlId = e.get_Parameter(BuiltInParameter.FAMILY_TOP_LEVEL_PARAM).AsElementId();
* Level tl = doc.GetElement(tlId) as Level;
* double zt = tl.Elevation;
* double tlo = e.get_Parameter(BuiltInParameter.FAMILY_TOP_LEVEL_OFFSET_PARAM).AsDouble();
* double top = zt + tlo;
* double zCent = (top + bot) / 2;
*
* center = new XYZ(colX,colY,zCent);
* }
* else
* {
* to = TagOrientation.Horizontal;
* LocationCurve loc = e.Location as LocationCurve;
* XYZ start2 = loc.Curve.GetEndPoint(0);
* XYZ end2 = loc.Curve.GetEndPoint(1);
* center = (start2 + end2) / 2;
* }
*
*
* Reference refer = new Reference(e);
* IndependentTag.Create(doc, elView.Id, refer, addLead, tm, to, center);
*
* }
*
* }*/
try
{
//LocationCurve framC = fecF.FirstElement().Location as LocationCurve;
FamilyInstance fi = fecC.FirstElement() as FamilyInstance;
//Transform fiP = fi.GetTransform();
LocationPoint col1 = fecC.FirstElement().Location as LocationPoint;
//XYZ test = fiP.OfPoint(col1.Point);
ElementId col1Bot = fecC.FirstElement().get_Parameter(BuiltInParameter.FAMILY_BASE_LEVEL_PARAM).AsElementId();
Level col1LB = doc.GetElement(col1Bot) as Level;
double bottom = col1LB.Elevation;
ElementId col1Top = fecC.FirstElement().get_Parameter(BuiltInParameter.FAMILY_TOP_LEVEL_PARAM).AsElementId();
Level col1LT = doc.GetElement(col1Top) as Level;
double top = col1LT.Elevation;
//Line framT = framC.Curve as Line;
//XYZ framP = framT.Origin;
Line framL = Line.CreateBound(new XYZ(col1.Point.X, col1.Point.Y, bottom), new XYZ(col1.Point.X, col1.Point.Y, top));
Dimension di = doc.Create.NewDimension(elView, framL, framArray);
di.DimensionType = doc.GetElement(set.HorizontalDimFlr) as DimensionType;
}
catch (Exception e)
{
TaskDialog.Show("Revit", e.Message + "\n" + e.Source);
}
try
{
LocationCurve framC = fecF.FirstElement().Location as LocationCurve;
ElementId col1Bot = fecC.FirstElement().get_Parameter(BuiltInParameter.FAMILY_BASE_LEVEL_PARAM).AsElementId();
Level col1LB = doc.GetElement(col1Bot) as Level;
double bottom = col1LB.Elevation;
Line framT = framC.Curve as Line;
XYZ framS = framT.GetEndPoint(0);
XYZ framE = framT.GetEndPoint(1);
//Line framL = framT.CreateOffset(-1, XYZ.BasisZ) as Line;
//XYZ framP = framT.Origin;
Line framL = Line.CreateBound(new XYZ(framS.X, framS.Y, bottom - 1.5), new XYZ(framE.X, framE.Y, bottom - 1.5));
Dimension di = doc.Create.NewDimension(elView, framL, colArray);
di.DimensionType = doc.GetElement(set.HeightDimWa) as DimensionType;
LocationPoint clp = fecC.FirstElement().Location as LocationPoint;
}
catch (Exception e)
{
TaskDialog.Show("Revit", e.Message + "\n" + e.Source);
}
localCurrent += 1;
localString = "Creating plan view...";
pf.LabelSet(localString, true, false, globalString, false);
View plView = AssemblyViewUtils.CreateDetailSection(doc, assemblyInstance.Id, AssemblyDetailViewOrientation.ElevationTop);
localCurrent += 1;
localString = "Creating material takeoff schedule...";
pf.LabelSet(localString, true, false, globalString, false);
ViewSchedule partList = AssemblyViewUtils.CreatePartList(doc, assemblyInstance.Id);
XYZ pt3D = new XYZ(0.1, 0.45, 0);
XYZ ptEl = new XYZ(0.5, 0.5, 0);
XYZ ptPl = new XYZ(0.5, 0.5, 0);
XYZ ptPa = new XYZ(0.03, 0.1, 0);
if (set != null)
{
view3D.ViewTemplateId = set.View3DTemplate;
}
if (set != null)
{
elView.ViewTemplateId = set.ViewElTemplate;
}
if (set != null)
{
plView.ViewTemplateId = set.ViewPlTemplate;
}
if (set != null)
{
partList.ViewTemplateId = set.ViewPaTemplate;
}
if (set != null)
{
try
{
localCurrent += 1;
localString = "Creating spool sheet...";
pf.LabelSet(localString, true, false, globalString, false);
ElementType noTitle = null;
FilteredElementCollector fen = new FilteredElementCollector(doc).OfClass(typeof(ElementType));
foreach (Element item in fen)
{
if (item.Name == "No Title")
{
noTitle = item as ElementType;
}
}
ViewSheet sheet = AssemblyViewUtils.CreateSheet(doc, assemblyInstance.Id, set.TemplateTemplate);
localCurrent += 1;
localString = "Adding views to sheet...";
pf.LabelSet(localString, true, false, globalString, false);
Viewport v3D = AddViewToSheet(doc, sheet, noTitle, pt3D, view3D.Id);
Viewport vEl = AddViewToSheet(doc, sheet, noTitle, ptEl, elView.Id);
BoundingBoxXYZ bbEl = vEl.get_BoundingBox(sheet);
Viewport vPl = AddViewToSheet(doc, sheet, noTitle, ptPl, plView.Id);
BoundingBoxXYZ bbPl = vPl.get_BoundingBox(sheet);
ScheduleSheetInstance vPa = ScheduleSheetInstance.Create(doc, sheet.Id, partList.Id, ptPa);
localCurrent += 1;
localString = "Cleaning up spool sheet...";
pf.LabelSet(localString, true, false, globalString, false);
BoundingBoxXYZ bb = sheet.CropBox;
BoundingBoxXYZ bbvPa = vPa.get_BoundingBox(sheet);
double minX = bb.Min.X;
double maxX = bb.Max.X;
double xLen = maxX - minX;
//TaskDialog.Show("Revit",minX + ", " + maxX + "\n" +bbvPa.Min.Y + ", " + bbvPa.Max.Y + "\n" + bbPl.Min.X + ", " + bbPl.Min.Y);
vPa.Point = new XYZ(vPa.Point.X, vPa.Point.Y - bbvPa.Min.Y, vPa.Point.Z);
double schedX = bbvPa.Max.X + 0.03;
double centEl = (bbEl.Max.X - bbEl.Min.X) / 2;
double centElY = (bbEl.Max.Y - bbEl.Min.Y) / 2;
double centPlY = (bbPl.Max.Y - bbPl.Min.Y) / 2;
vEl.SetBoxCenter(new XYZ(schedX + centEl, (centPlY + 0.05) * 2 + centElY, vEl.GetBoxCenter().Z));
vPl.SetBoxCenter(new XYZ(schedX + centEl, centPlY + 0.05, vPl.GetBoxCenter().Z));
sheet.SheetNumber = elem.get_Parameter(pa.Definition).AsString();
sheet.Name = "Framing";
}
catch (Exception ex)
{
TaskDialog.Show("Error", ex.Message);
break;
}
}
localCurrent += 1;
localString = String.Format("Wall assembly {0} completed...",
elem.get_Parameter(pa.Definition).AsString());
pf.LabelSet(localString, true, false, globalString, false);
tr.Commit();
localCurrent = 0;
}
}
currentCount += 1;
globalString = String.Format("{0} of {1} panels processed", currentCount, totalCount);
pf.LabelSet(localString, false, true, globalString, true);
}
//info += "\n\t" + pa.Definition.Name + ": " + pa.AsString();
}
//}
}
pf.Close();
tr.Start();
doc.Regenerate();
tr.Commit();
TaskDialog.Show("Revit", info);
}
return(true);
}
}
}
catch (Exception ex)
{
message = ex.Message;
}
finally
{
res_mng.ReleaseAllResources();
def_res_mng.ReleaseAllResources();
}
return(false);
}