Ejemplo n.º 1
0
        private ExampleCommand GetExample()
        {
            ExampleCommand example = new ExampleCommand();

            if (IsHelpRequested(example))
            {
                return(example);
            }
            bool metUnknownOption = false;

            while (!metUnknownOption && Eat() is string option)
            {
                switch (option)
                {
                case "-a":
                case "--all":
                    if (example.ExampleName != null)
                    {
                        throw logger.Error(new OptionException(option, "Cannot specify example project name when requesting all examples"));
                    }
                    example.DownloadAll = GetBoolean();
                    break;

                default:
                    metUnknownOption = example.ExampleName != null;
                    if (!metUnknownOption)
                    {
                        example.ExampleName = arg;
                    }
                    break;
                }
            }
            return(example);
        }
Ejemplo n.º 2
0
        public void Post([FromBody] ExampleCommand value)
        {
            value.Id = Guid.NewGuid().ToString();
            Aggregate exampleDomain = new ExampleAggregate();

            CommandHandler.ActivateCommand(value, exampleDomain);
        }
Ejemplo n.º 3
0
        public override void Specify()
        {
            given("exactly one command is loaded", () =>
            {
                var exampleCommand = new ExampleCommand();
                var commands       = new ConsoleCommand[] { exampleCommand };

                when("no parameters are specified", () =>
                {
                    var output   = new StringWriter();
                    var exitCode = arrange(() => ConsoleCommandDispatcher.DispatchCommand(commands, new string[0], output));

                    then_the_command_runs_without_tracing_parameter_information(output, exitCode);

                    then("the command's property is not set", () =>
                    {
                        expect(() => exampleCommand.Foo == null);
                    });
                });

                when("the only parameter specified is the command", () =>
                {
                    var output   = new StringWriter();
                    var exitCode = arrange(() => ConsoleCommandDispatcher.DispatchCommand(commands, new[] { "Example" }, output));

                    then_the_command_runs_without_tracing_parameter_information(output, exitCode);

                    then("the command's property is not set", () =>
                    {
                        expect(() => exampleCommand.Foo == null);
                    });
                });

                when("the only parameter specified is not the command", () =>
                {
                    var output   = new StringWriter();
                    var exitCode = arrange(() => ConsoleCommandDispatcher.DispatchCommand(commands, new[] { "/f=bar" }, output));

                    then_the_command_runs_without_tracing_parameter_information(output, exitCode);

                    then("the command's property is set", () =>
                    {
                        expect(() => exampleCommand.Foo == "bar");
                    });
                });

                when("both the command and an extra parameter are specified", () =>
                {
                    var output   = new StringWriter();
                    var exitCode = arrange(() => ConsoleCommandDispatcher.DispatchCommand(commands, new[] { "Example", "/f=bar" }, output));

                    then_the_command_runs_without_tracing_parameter_information(output, exitCode);

                    then("the command's property is set", () =>
                    {
                        expect(() => exampleCommand.Foo == "bar");
                    });
                });
            });
        }
        public override void Specify()
        {
            given("exactly one command is loaded", () =>
            {
                var exampleCommand = new ExampleCommand();
                var commands = new ConsoleCommand[] { exampleCommand };

                when("no parameters are specified", () =>
                {
                    var output = new StringWriter();
                    var exitCode = arrange(() => ConsoleCommandDispatcher.DispatchCommand(commands, new string[0], output));

                    then_the_command_runs_without_tracing_parameter_information(output, exitCode);

                    then("the command's property is not set", () =>
                    {
                        expect(() => exampleCommand.Foo == null);
                    });
                });

                when("the only parameter specified is the command", () =>
                {
                    var output = new StringWriter();
                    var exitCode = arrange(() => ConsoleCommandDispatcher.DispatchCommand(commands, new[] { "Example" }, output));

                    then_the_command_runs_without_tracing_parameter_information(output, exitCode);

                    then("the command's property is not set", () =>
                    {
                        expect(() => exampleCommand.Foo == null);
                    });
                });

                when("the only parameter specified is not the command", () =>
                {
                    var output = new StringWriter();
                    var exitCode = arrange(() => ConsoleCommandDispatcher.DispatchCommand(commands, new[] { "/f=bar" }, output));

                    then_the_command_runs_without_tracing_parameter_information(output, exitCode);

                    then("the command's property is set", () =>
                    {
                        expect(() => exampleCommand.Foo == "bar");
                    });
                });

                when("both the command and an extra parameter are specified", () =>
                {
                    var output = new StringWriter();
                    var exitCode = arrange(() => ConsoleCommandDispatcher.DispatchCommand(commands, new[] { "Example", "/f=bar" }, output));

                    then_the_command_runs_without_tracing_parameter_information(output, exitCode);

                    then("the command's property is set", () =>
                    {
                        expect(() => exampleCommand.Foo == "bar");
                    });
                });
            });
        }
Ejemplo n.º 5
0
        public async Task HandlerCompilation()
        {
            var dispatcher = new MessageDispatcher(new Container(), Substitute.For <IBotService>());

            dispatcher.Register("example", typeof(ExampleCommand));

            var command = new ExampleCommand();
            var message = new Message();

            var node = dispatcher.RegisteredCommands["example"];

            var response = Assert.IsType <MessageResponse>(node.Handler(command, message, Array.Empty <string>()));

            Assert.Equal("First", response.Content);

            node = node.Next !;
            Assert.NotNull(node);

            response = Assert.IsType <MessageResponse>(node.Handler(command, message, new[] { "arg" }));
            Assert.Equal("Arg: arg", response.Content);

            node = node.Next !;
            Assert.NotNull(node);

            response = await Assert.IsType <Task <MessageResponse> >(node.Handler(command, message, Array.Empty <string>()));

            Assert.Equal("fallback", response.Content);

            Assert.Null(node.Next);
        }
        public async Task SendCommandToTransport()
        {
            const string TargetEndpoint = "Target";

            var routes = new Collection <CommandRoute>
            {
                new CommandRoute(typeof(ExampleCommand), TargetEndpoint)
            };

            var publisher = new MessagePublisher(
                mockPipeline.Object,
                FullNameTypeMap.Instance,
                routes);

            var command = new ExampleCommand {
                Property = "Hello world"
            };
            await publisher
            .SendCommand(command)
            .ConfigureAwait(false);

            mockPipeline.Verify(
                m => m.Process(
                    It.Is <IEnumerable <OutgoingMessage> >(
                        value => value.Single().Body == command &&
                        value.Single().MessageTypeNames.First() == FullNameTypeMap.Instance.GetNameForType(typeof(ExampleCommand)) &&
                        value.Single().SpecificReceivingEndpointName == TargetEndpoint)),
                Times.Once);
        }
Ejemplo n.º 7
0
        private void _onExampleCommand(ExampleCommand cmd)
        {
            // this checks the aggregate to see if a user with this Id has already been created
            if (_Id != null)
            {
                throw new ArgumentException("Id", "User already created");
            }
            // here is where we can ensure that the command has all the information in it that we expect it to have
            if (cmd.Id == null)
            {
                throw new ArgumentException("Id", "Id is a required field");
            }
            if (cmd.Email == null)
            {
                throw new ArgumentException("Email", "Email is a required field");
            }
            if (cmd.Name == null)
            {
                throw new ArgumentException("Name", "Name is a required field");
            }
            // now we assign values to the event model that we created in ExampleEvent
            Thread.Sleep(100);
            ExampleEvent exampleEvent = new ExampleEvent
            {
                Id    = cmd.Id,
                Name  = cmd.Name,
                Email = cmd.Email
            };

            // And finally we send the example event off to the Event Worker to be saved, filed and published
            EventWorker.Work(exampleEvent);
        }
Ejemplo n.º 8
0
        public async Task <ActionResult> Post([FromBody] int value)
        {
            var exampleCommand = new ExampleCommand(ExampleId.New, value);
            await _commandBus.PublishAsync(exampleCommand, CancellationToken.None);

            return(CreatedAtAction(nameof(GetExample), new { id = exampleCommand.AggregateId.Value }, exampleCommand));
        }
Ejemplo n.º 9
0
        public void Execute_ExampleFound_RunsExample()
        {
            var exampleCommand = new ExampleCommand(this.examplesMock.Object);

            typeof(ExampleCommand)
            .GetProperty(nameof(ExampleCommand.ExampleName))
            .SetValue(exampleCommand, "Found");
            exampleCommand.Execute(CancellationToken.None);
            this.exampleMock.Verify(e => e.Run(It.IsAny <CancellationToken>()));
        }
        public void CommandAndParameterSpecified()
        {
            var exampleCommand = new ExampleCommand();

            var output   = new StringWriter();
            var exitCode = ConsoleCommandDispatcher.DispatchCommand(exampleCommand, new[] { "Example", "/f=bar" }, output);

            then_the_command_runs_without_tracing_parameter_information(output, exitCode);

            StringAssert.AreEqualIgnoringCase("bar", exampleCommand.Foo);
        }
        public void OnlyCommandIsSpecified()
        {
            var exampleCommand = new ExampleCommand();

            var output   = new StringWriter();
            var exitCode = ConsoleCommandDispatcher.DispatchCommand(exampleCommand, new[] { "Example" }, output);

            then_the_command_runs_without_tracing_parameter_information(output, exitCode);

            Assert.IsNull(exampleCommand.Foo);
        }
Ejemplo n.º 12
0
        public void OnInjectDependencies(Signal <float> exampleSignal)
        {
            // instantiate a command object
            ExampleCommand command = new ExampleCommand();

            // register a command as a listener of the signal
            exampleSignal.AddCommand(command);

            // ...
            // further calls to exampleSignal.Dispatch( float value ) will also
            // invoke command.Execute( float value )
        }
Ejemplo n.º 13
0
        public void GeneratesValidCommandWithEmptyPayload()
        {
            var command = new ExampleCommand(0x01, 0x02, new byte[0]);
            var packet  = command.GetBytes(0x31);

            Assert.AreEqual(7, packet.Length);
            Assert.AreEqual(0xff, packet[0]); // SOP1
            Assert.AreEqual(0xff, packet[1]); // SOP2
            Assert.AreEqual(0x01, packet[2]); // Device
            Assert.AreEqual(0x02, packet[3]); // Command
            Assert.AreEqual(0x31, packet[4]); // Sequence
            Assert.AreEqual(0x01, packet[5]); // Length of payload + checksum
            Assert.AreEqual(0xca, packet[6]); // inverted checksum
        }
Ejemplo n.º 14
0
        public void GeneratesValidCommandWithEmptyPayload()
        {
            var command = new ExampleCommand(0x01, 0x02, new byte[0]);
            var packet = command.GetBytes(0x31);

            Assert.AreEqual(7, packet.Length);
            Assert.AreEqual(0xff, packet[0]); // SOP1
            Assert.AreEqual(0xff, packet[1]); // SOP2
            Assert.AreEqual(0x01, packet[2]); // Device
            Assert.AreEqual(0x02, packet[3]); // Command
            Assert.AreEqual(0x31, packet[4]); // Sequence
            Assert.AreEqual(0x01, packet[5]); // Length of payload + checksum
            Assert.AreEqual(0xca, packet[6]); // inverted checksum
        }
Ejemplo n.º 15
0
        static void CommandPattern()
        {
            Console.WriteLine("\n\nCommandPattern Pattern");
            var history        = new History();
            var exampleService = new ExampleService("Initial value");
            var exampleCommand = new ExampleCommand(history, exampleService);
            var undoCommand    = new UndoCommand <string>(history);

            Console.WriteLine(exampleService.GetContent());
            exampleCommand.Execute();
            Console.WriteLine(exampleService.GetContent());
            undoCommand.Execute();
            Console.WriteLine(exampleService.GetContent());
        }
Ejemplo n.º 16
0
        public void GeneratesValidCommandWithPayload()
        {
            var command = new ExampleCommand(0xde, 0xad, new byte[] { 0x01 });
            var packet  = command.GetBytes(0x11);

            Assert.AreEqual(8, packet.Length);
            Assert.AreEqual(0xff, packet[0]); // SOP1
            Assert.AreEqual(0xff, packet[1]); // SOP2
            Assert.AreEqual(0xde, packet[2]); // Device
            Assert.AreEqual(0xad, packet[3]); // Command
            Assert.AreEqual(0x11, packet[4]); // Sequence
            Assert.AreEqual(0x02, packet[5]); // Length of payload + checksum
            Assert.AreEqual(0x01, packet[6]); // payload
            Assert.AreEqual(0x60, packet[7]); // inverted checksum
        }
 public ActionResult Example([FromBody] ExampleCommand example)
 {
     try
     {
         //Commands inherit Id from their base class, this data is used to create the eventstream Id.
         //If that stream is derived from fields in the command or event other than a simple Id, this is the place to make assign it.
         Aggregate exampleAggreate = new ExampleAggregate();
         CommandHandler.ActivateCommand(example, exampleAggreate);
         return(Ok(example.Id));
     }
     catch (Exception e)
     {
         return(BadRequest(e.Message.ToString()));
     }
 }
Ejemplo n.º 18
0
        public void GeneratesValidCommandWithPayload()
        {
            var command = new ExampleCommand(0xde, 0xad, new byte[] {0x01});
            var packet = command.GetBytes(0x11);

            Assert.AreEqual(8, packet.Length);
            Assert.AreEqual(0xff, packet[0]); // SOP1
            Assert.AreEqual(0xff, packet[1]); // SOP2
            Assert.AreEqual(0xde, packet[2]); // Device
            Assert.AreEqual(0xad, packet[3]); // Command
            Assert.AreEqual(0x11, packet[4]); // Sequence
            Assert.AreEqual(0x02, packet[5]); // Length of payload + checksum
            Assert.AreEqual(0x01, packet[6]); // payload
            Assert.AreEqual(0x60, packet[7]); // inverted checksum
        }
        public async Task <IActionResult> Post([FromBody] ExampleCommand request)
        {
            var bus = BusConfigurator.ConfigureBus();

            var sendToUri = new Uri($"{RabbitMqConsts.RabbitMqUri}{RabbitMqConsts.ExampleQueueName}");
            var endPoint  = await bus.GetSendEndpoint(sendToUri);

            await endPoint.Send <IExampleCommand>(new
            {
                Name    = request.Name,
                Surname = request.Surname
            });

            return(Ok("Success"));
        }
Ejemplo n.º 20
0
        public void GeneratesValidCommandWithPayload2()
        {
            var command = new ExampleCommand(0xab, 0xcd, new byte[] {0xa1, 0xa2, 0xa3, 0xa4});
            var packet = command.GetBytes(0x21);

            Assert.AreEqual(11, packet.Length);
            Assert.AreEqual(0xff, packet[0]); // SOP1
            Assert.AreEqual(0xff, packet[1]); // SOP2
            Assert.AreEqual(0xab, packet[2]); // Device
            Assert.AreEqual(0xcd, packet[3]); // Command
            Assert.AreEqual(0x21, packet[4]); // Sequence
            Assert.AreEqual(0x05, packet[5]); // Length of payload + checksum
            Assert.AreEqual(0xa1, packet[6]); // payload
            Assert.AreEqual(0xa2, packet[7]); // payload
            Assert.AreEqual(0xa3, packet[8]); // payload
            Assert.AreEqual(0xa4, packet[9]); // payload
            Assert.AreEqual(0xd7, packet[10]); // inverted checksum
        }
Ejemplo n.º 21
0
        public void Should_ReturnBadRequest_When_IncorrectModel()
        {
            // Arrange
            var model = new ExampleCommand()
            {
                Type = 0
            };

            // Act
            var controller = new ExampleController();

            var result = controller.Post(model);

            // Assert
            var okObjectResult = result.Should().BeOfType <BadRequestObjectResult>().Subject;

            okObjectResult.StatusCode.Should().Be(400);
        }
Ejemplo n.º 22
0
        public void GeneratesValidCommandWithPayload2()
        {
            var command = new ExampleCommand(0xab, 0xcd, new byte[] { 0xa1, 0xa2, 0xa3, 0xa4 });
            var packet  = command.GetBytes(0x21);

            Assert.AreEqual(11, packet.Length);
            Assert.AreEqual(0xff, packet[0]);  // SOP1
            Assert.AreEqual(0xff, packet[1]);  // SOP2
            Assert.AreEqual(0xab, packet[2]);  // Device
            Assert.AreEqual(0xcd, packet[3]);  // Command
            Assert.AreEqual(0x21, packet[4]);  // Sequence
            Assert.AreEqual(0x05, packet[5]);  // Length of payload + checksum
            Assert.AreEqual(0xa1, packet[6]);  // payload
            Assert.AreEqual(0xa2, packet[7]);  // payload
            Assert.AreEqual(0xa3, packet[8]);  // payload
            Assert.AreEqual(0xa4, packet[9]);  // payload
            Assert.AreEqual(0xd7, packet[10]); // inverted checksum
        }
        public async Task ThrowExceptionIfNoRouteConfiguredForCommand()
        {
            var publisher = new MessagePublisher(
                mockPipeline.Object,
                FullNameTypeMap.Instance,
                new Collection <CommandRoute>());

            var command = new ExampleCommand {
                Property = "Hello world"
            };
            var exception = await Assert.ThrowsExceptionAsync <InvalidOperationException>(
                () => publisher
                .SendCommand(command))
                            .ConfigureAwait(false);

            Assert.AreEqual(
                "No target endpoint has been configured for the command type \"SimpleEventBus.UnitTests.ExampleCommand, SimpleEventBus.UnitTests, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null\".",
                exception.Message);
        }
        public async Task <RequestResult <Example> > Handle(ExampleCommand request, CancellationToken cancellationToken)
        {
            var result = new RequestResult <Example>();

            var exampleResponse = await _exampleClient.GetExampleFromExternalResource(request.Value);

            if (exampleResponse == null)
            {
                result.AddError(new Error {
                    Code = "EXAMPLE_CODE", Reason = "Response from external example call was null"
                });
                result.AddError("EXAMPLE_CODE", "Response from external example call was null");
                return(result);
            }

            result.Payload = await _exampleRepository.InsertExample(exampleResponse.Value);

            return(result);
        }
Ejemplo n.º 25
0
        private Events[] _exampleCommand(ExampleCommand cmd)
        {
            //we can check the _Id field to ensure that this command hasn't already been completed.
            //hydrate is called below by the EventStore Interfacing methods in infra.
            //This way, we can control the events to make sure that the data is as expected

            if (!string.IsNullOrEmpty(_Id))
            {
                throw new Exception("This example event has already been created");
            }
            if (string.IsNullOrEmpty(cmd.Id))
            {
                throw new Exception("Id is a required field");
            }

            //check to see if all required fields are included
            //todo, build helper function to siplify required parameter checking
            //if all fields are correctly filled out, return an array of events
            return(new Events[] { new ExampleEvent {
                                      Id = cmd.Id, Name = cmd.Name
                                  } });
        }
Ejemplo n.º 26
0
        public void ShouldCallHandlerWithMatchedArgumentCount()
        {
            const string ExceptionMessage = "The argument count doesn't match";

            var dispatcher = new MessageDispatcher(new Container(), Substitute.For <IBotService>());

            dispatcher.Register("example", typeof(ExampleCommand));

            var results = new List <object>();

            var command = new ExampleCommand();
            var message = new Message();

            var node = dispatcher.RegisteredCommands["example"];

            Assert.Equal(ExceptionMessage, Assert.Throws <ArgumentException>(() => node.Handler(command, message, new[] { "arg" })).Message);

            node = node.Next !;

            Assert.Equal(ExceptionMessage, Assert.Throws <ArgumentException>(() => node.Handler(command, message, Array.Empty <string>())).Message);
            Assert.Equal(ExceptionMessage, Assert.Throws <ArgumentException>(() => node.Handler(command, message, new[] { "arg", "arg2" })).Message);
        }
Ejemplo n.º 27
0
        static async Task Main(string[] args)
        {
            var container = new ServiceCollection()
                            .AddMediatR(typeof(Program).Assembly)
                            .Scan(scan => scan
                                  .FromAssemblyOf <Program>()
                                  .AddClasses(classes => classes.AssignableTo(typeof(IValidator <>)))
                                  .AsImplementedInterfaces()
                                  .WithScopedLifetime()
                                  .AddClasses(classes => classes.AssignableTo(typeof(IPipelineBehavior <,>)))
                                  .AsImplementedInterfaces()
                                  .WithScopedLifetime())
                            .BuildServiceProvider();

            var mediator = container.GetRequiredService <IMediator>();

            var command = new ExampleCommand
            {
                ExampleValue = "Test" // valid input
                                      // ExampleValue = "qwertyuiopasdfghjklzxcvbnm" // invalid input
            };

            await mediator.Send(command);
        }
Ejemplo n.º 28
0
        public void Execute_ExampleNotFound_WritesNotFound()
        {
            var exampleCommand = new ExampleCommand(this.examplesMock.Object);

            typeof(ExampleCommand)
            .GetProperty(nameof(ExampleCommand.ExampleName))
            .SetValue(exampleCommand, "NotFound");
            string outputString;

            using (var newOut = new StringWriter(CultureInfo.InvariantCulture))
            {
                var previousOut = Console.Out;
                Console.SetOut(newOut);

                exampleCommand.Execute(CancellationToken.None);

                Console.SetOut(previousOut);
                outputString = newOut.ToString();
            }

            Assert.That(
                outputString,
                Is.EqualTo("Could not find example named 'NotFound'." + Environment.NewLine));
        }
Ejemplo n.º 29
0
        static void Main(string[] args)
        {
            var rmqService = new RabbitMQServiceBuilder()
                             .UseJsonSerializer()
                             .SetDebugWriter(txt => Console.WriteLine($"[ {DateTime.Now.ToString("HH:mm:ss.fff")} ] {txt}"))
                             .SetOptions(opt =>
            {
                opt.Hostname    = "<hostname>";
                opt.Port        = 5671;
                opt.UseSSL      = true;
                opt.Username    = "******";
                opt.Password    = "******";
                opt.VirtualHost = "/";
            })
                             .AddListenerSubscription <ExampleEvent>(opt =>
            {
                opt.QueueName  = "";
                opt.Exchange   = "amq.topic";
                opt.Exclusive  = true;
                opt.AutoAck    = true;
                opt.AutoDelete = true;
                opt.Durable    = false;
                opt.RoutingKey = "event.example";
                opt.DebugText += (txt) =>
                {
                    Console.WriteLine(txt);
                };
                opt.Callback += (evt) =>
                {
                    Console.WriteLine($"[ {DateTime.Now.ToString("HH:mm:ss.fff")} ] Received Event with name: {evt.EventName}");
                };
            })
                             .AddRpcSubscription <ExampleCommand>(opt =>
            {
                opt.QueueName  = typeof(ExampleCommand).Name;
                opt.Exchange   = "";
                opt.Exclusive  = false;
                opt.AutoAck    = false;
                opt.AutoDelete = false;
                opt.Durable    = true;
                opt.DebugText += (txt) =>
                {
                    Console.WriteLine(txt);
                };
                opt.Callback += (cmd) =>
                {
                    Console.WriteLine($"[ {DateTime.Now.ToString("HH:mm:ss.fff")} ] Handling command");
                    return(new CommandResult()
                    {
                        StatusCode = 200,
                        Message = cmd.CommandText
                    });
                };
            })
                             .AddListenerSubscription(new ExampleSubscription())
                             .Build();


            Console.WriteLine($"[ {DateTime.Now} ] Sending Event");
            rmqService.Publish("amq.topic", "event.example", new ExampleEvent()
            {
                EventName = "This is an example event"
            });

            var cmd = new ExampleCommand()
            {
                CommandText = "This is an example command"
            };

            Console.WriteLine($"[ {DateTime.Now} ] Sending Command");
            rmqService.Call <CommandResult>(
                exchange: "",
                routingKey: typeof(ExampleCommand).Name,
                content: cmd,
                timeoutSeconds: 10,
                ResponseCallback: (res) =>
            {
                Console.WriteLine($"[ {DateTime.Now.ToString("HH:mm:ss.fff")} ] Received Command Result with code: {res.StatusCode} and message: {res.Message}");
            },
                TimeoutCallback: () =>
            {
                Console.WriteLine($"[ {DateTime.Now.ToString("HH:mm:ss.fff")} ] Command Timed out");
            });


            //Example of targeting the "ExampleSubscription.cs" class.
            var cmd2 = new ExampleSubscriptionObject()
            {
                ObjectContent = "This is another example command"
            };

            Console.WriteLine($"[ {DateTime.Now} ] Sending Command 2");
            rmqService.Call <ExampleRpcResult>(
                exchange: "",
                routingKey: typeof(ExampleSubscriptionObject).Name,
                content: cmd2,
                timeoutSeconds: 10,
                ResponseCallback: (res) =>
            {
                Console.WriteLine($"[ {DateTime.Now.ToString("HH:mm:ss.fff")} ] Received Command 2 Result with OK: {res.ExampleWasOk} and message: {res.ExampleResultMessage}");
            },
                TimeoutCallback: () =>
            {
                Console.WriteLine($"[ {DateTime.Now.ToString("HH:mm:ss.fff")} ] Command Timed out");
            });

            Console.ReadLine();
        }
Ejemplo n.º 30
0
 public ExampleWindowVM()
 {
     Users          = new Users();
     ExampleCommand = new ExampleCommand(this);
 }