protected void btnOK_Click(object sender, EventArgs e)
{
try
{
EquipmentInfo equipmentData = EquipmentInfo.GetEquipmentByName(mEQP.EquipmentName);
if (mEQP.Tag != equipmentData.Tag)
{
throw new RuleCimesException(TextMessage.Error.T00747(""));
}
string EqpID = ciEquipment.Must(lblEquipment);
string Reason = csReason.Must(lblReasonCode).Value;
EquipmentStateInfo equipmentState = EquipmentStateInfo.GetEquipmentStateByState(ddlNewState.Must(lblNewState).Text);
var txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, this.ApplicationName);
var rcData = csReason.GetBusinessReason().CategoryReason;
txnStamp.CategoryReasonCode = rcData;
txnStamp.Description = ttbDesc.Text.Trim();
#region 檢查是否有設定機台變更狀態警報，若有，則發送警報
//使用Function取得ALM設定，可彈性使用
//取得機台狀態警報設定，預設是抓取系統資料設定[EquipStateAlarm]
AlarmTypeInfo AlarmType = RuleExtendManager.GetEquipmentChangeStateAlarm(equipmentData, ddlNewState.Must(lblNewState).Text);
string ALMsg = @"[Subject:{0}][Content:{1}:{2}; {3}:{4}; {5}:{6}; {7}:{8}; {9}:{10}]";
if (AlarmType != null)
{
// "[Content:TEST][Subject:TEST]"
ALMsg = string.Format(ALMsg, ProgramInformationBlock1.Caption, lblEquipment.Text, mEQP.EquipmentName, lblOldState.Text, mEQP.CurrentState, lblNewState.Text, equipmentState.State, lblReasonCode.Text, rcData.Reason, lblDescription.Text, txnStamp.Description);
}
#endregion
using (var cts = CimesTransactionScope.Create())
{
EMSTransaction.ChangeState(equipmentData, equipmentState, txnStamp);
RuleExtendManager.EquipmentTxnEnd(equipmentData);
cts.Complete();
}
#region 發送警報
if (AlarmType != null)
{
AlarmService WebServiceALM = new AlarmService();
string url = "http://" + Request.Url.Host + Request.ApplicationPath + "/ALM/Services/AlarmService.asmx";
WebServiceALM.Url = url;
string ReturnMsg = WebServiceALM.LaunchAlarm(AlarmType.GroupRights, AlarmType.TYPE, ALMsg, txnStamp.RecordTime, "UI", User.Identity.Name);
}
#endregion
Response.Redirect(ciMes.Security.UserSetting.GetPreviousListPage(this), false);
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//檢查機台/序號是否有輸入
ttbEquipOrCompLot.Must(lblEquipOrCompLot);
using (var cts = CimesTransactionScope.Create())
{
string equipmentState = "Wait" + _QCType;
#region 更新機台狀態為WaitFAI
//只有FAI需要變更機台狀態，如果QCType參數為PPK或PQC，則不需更新機台狀態
if (_QCType.Equals(CustomizeFunction.QCType.FAI.ToCimesString()))
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState(equipmentState);
if (newStateInfo == null)
{
//C00028 無機台狀態{0}的設定資料!
throw new CimesException(RuleMessage.Error.C00028(equipmentState));
}
//更新機台狀態
EMSTransaction.ChangeState(_EquipData, newStateInfo, txnStamp);
}
#endregion
#region 更新單號狀態為WaitFAI/WaitPPK
foreach (DataRow dr in _QCTable.Rows)
{
var qcInspectionData = InfoCenter.GetBySID <QCInspectionInfo>(dr["QCINSPSID"].ToString()).ChangeTo <QCInspectionInfoEx>();
qcInspectionData.Status = equipmentState;
qcInspectionData.ReceiveTime = txnStamp.RecordTime;
qcInspectionData.ReceiveUser = txnStamp.UserID;
qcInspectionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
}
#endregion
cts.Complete();
}
ClearField();
AjaxFocus(ttbEquipOrCompLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 退回
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnReject_Click(object sender, EventArgs e)
{
try
{
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//檢查機台/序號是否有輸入
ttbEquipOrCompLot.Must(lblEquipOrCompLot);
string status = "ToBeSent" + _QCType;
using (var cts = CimesTransactionScope.Create())
{
#region 更新單號狀態為ToBeSentFAI及設置PASSFLAG = N
foreach (DataRow dr in _QCTable.Rows)
{
var qcInspectionData = InfoCenter.GetBySID <QCInspectionInfo>(dr["QCINSPSID"].ToString()).ChangeTo <QCInspectionInfoEx>();
qcInspectionData.Status = status;
qcInspectionData.PassFlag = "N";
qcInspectionData.QCRejectTime = txnStamp.RecordTime;
qcInspectionData.QCRejectUser = txnStamp.UserID;
qcInspectionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
}
#endregion
#region 更新機台狀態
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState(status);
if (newStateInfo == null)
{
//C00028 無機台狀態{0}的設定資料!
throw new CimesException(RuleMessage.Error.C00028(status));
}
//更新機台狀態
EMSTransaction.ChangeState(_EquipData, newStateInfo, txnStamp);
#endregion
cts.Complete();
}
ClearField();
AjaxFocus(ttbEquipOrCompLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確認出站後是否有下一站的預約紀錄，如果有，則將批號進站至下一個工作站
/// </summary>
/// <param name="txnLotData">機加批號</param>
/// <param name="txnStamp"></param>
public void CheckNextReserveCheckIn(LotInfoEx txnLotData, TransactionStamp txnStamp)
{
//取得預約工作站資料
var WIPNextReserveList = CSTWIPReserveCheckInInfo.GetDataByLot(txnLotData.Lot);
if (WIPNextReserveList.Count > 0)
{
//下一個預約工作站資料
var reserveData = WIPNextReserveList[0];
//將預約的進站時間回寫到hist的Remark01
txnStamp.Remark01 = reserveData.InTime;
//取得機台資料
var equipData = EquipmentInfo.GetEquipmentByName(reserveData.Equipment);
if (equipData == null)
{
//[00885]機台{0}不存在！
throw new Exception(TextMessage.Error.T00885(reserveData.Equipment));
}
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("RUN");
if (equipData.CurrentState != "RUN")
{
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
//批號上機台
EMSTxn.Default.AddLotToEquipment(txnLotData, equipData, txnStamp);
//批號進站
WIPTransaction.CheckIn(txnLotData, equipData.EquipmentName, "", "", LotDefaultStatus.Run.ToString(), txnStamp);
//將批號Dispatch到下一規則
WIPTransaction.DispatchLot(txnLotData, txnStamp);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
#region 確認選擇結果，如果是選擇NG，確認是否有選擇原因碼
string result = "";
if (rdbOK.Checked)
{
result = "OK";
}
else if (rdbNG.Checked)
{
result = "NG";
//確認是否有選擇原因碼
ddlFAIReasonCode.Must(lblFAIReasonCode);
}
else if (rdbPASS.Checked)
{
result = "PASS";
}
else if (rdbCLOSE.Checked)
{
result = "CLOSE";
//確認是否有選擇原因碼
ddlFAIReasonCode.Must(lblFAIReasonCode);
}
#endregion
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
#region 更新檢驗主檔[MES_QC_INSP]
//取得檢驗主檔資料
var QCInsepctionData = InfoCenter.GetBySID <QCInspectionInfo>(_SelectedQCData.QCInspectionSID).ChangeTo <QCInspectionInfoEx>();
//原因碼
ReasonCategoryInfo reason = null;
//有選擇原因碼才更新[NG_Category]及[NG_Reason]
if (string.IsNullOrEmpty(ddlFAIReasonCode.SelectedValue) == false)
{
reason = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlFAIReasonCode.SelectedValue);
QCInsepctionData.NG_Category = reason.Category;
QCInsepctionData.NG_Reason = reason.Reason;
}
//如果判定結果為結單的話，則必須把結單時間及人員資料寫回資料庫
if (result == "CLOSE")
{
QCInsepctionData.FINISHTIME = txnStamp.RecordTime;
QCInsepctionData.FINISHUSER = txnStamp.UserID;
}
QCInsepctionData.NG_Description = ttbDescr.Text;
QCInsepctionData.Result = result;
QCInsepctionData.Status = "Finished";
QCInsepctionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
#endregion
#region 更新機台檢驗主檔[CST_WIP_CMM]
if (_CSTWIPCMMList != null)
{
//更新檢驗主檔的QCInspectionSID欄位
_CSTWIPCMMList.ForEach(data =>
{
data.QCInspectionSID = QCInsepctionData.ID;
data.UpdateToDB();
});
}
#endregion
#region 更新機台資訊
//取得相同BatchID的檢驗資料
var QCDataList = QCInspectionInfoEx.GetDataListByBatchID(_SelectedQCData.BatchID);
//相同BatchID都已完成檢驗旗標
bool isAllFinish = true;
QCDataList.ForEach(p =>
{
if (!(p.Status == "Finished"))
{
isAllFinish = false;
}
});
//取得lot資料
var lot = InfoCenter.GetBySID <LotInfo>(_SelectedQCData.ObjectSID);
//更新機台屬性[FAICOUNT]
CustomizeFunction.UpdateFAI(_SelectedQCData.EquipmentName, lot.Lot, (rdbNG.Checked) ? true : false, txnStamp);
//如果相同的BatchID都檢驗完成或選擇結果為NG時，則更新狀態為IDLE及更新FAICOUNT
if (isAllFinish)
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("IDLE");
var equipData = EquipmentInfo.GetEquipmentByName(_SelectedQCData.EquipmentName);
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
#endregion
//如果判定結果選擇為NG，則必須拆批送待判
if (rdbNG.Checked)
{
//判定NG直接拆批及送待判工作站
CustomizeFunction.SplitDefectLot(_SelectedQCData.ComponentLot, ttbDescr.Text, reason, txnStamp);
}
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
#region 確認選擇結果，如果是選擇NG，確認是否有選擇原因碼
string result = "";
if (rdbOK.Checked)
{
result = "OK";
}
else if (rdbNG.Checked)
{
result = "NG";
//確認是否有選擇原因碼
ddlPQCReasonCode.Must(lblPQCReasonCode);
}
#endregion
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
#region 更新檢驗主檔[MES_QC_INSP]
//取得檢驗主檔資料
var QCInsepctionData = InfoCenter.GetBySID <QCInspectionInfo>(_SelectedQCData.QCInspectionSID).ChangeTo <QCInspectionInfoEx>();
//有選擇原因碼才更新[NG_Category]及[NG_Reason]
if (string.IsNullOrEmpty(ddlPQCReasonCode.SelectedValue) == false)
{
var reason = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlPQCReasonCode.SelectedValue);
QCInsepctionData.NG_Category = reason.Category;
QCInsepctionData.NG_Reason = reason.Reason;
}
QCInsepctionData.NG_Description = ttbDescr.Text;
QCInsepctionData.Result = result;
QCInsepctionData.Status = "Finished";
QCInsepctionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
#endregion
#region 更新自主檢數據內容[CST_EDC_COMP]
bool inSpec = true;
gvComponentEDC.Rows.LoopDo <GridViewRow>((p, i) => {
// 取得TextBox Control
var ttbEDC = p.FindControl("ttbEDC") as TextBox;
if (ttbEDC.Text.IsNullOrEmpty())
{
AjaxFocus(ttbEDC);
throw new Exception(TextMessage.Error.T00043(GetUIResource("CenterHoleData")));
}
// 是否符合規格判斷
var measureVal = ttbEDC.Text.ToDecimal();
if (measureVal > _SAICenterHole.Remark02.ToDecimal())
{
inSpec = false;
}
if (measureVal < _SAICenterHole.Remark03.ToDecimal())
{
inSpec = false;
}
var lotData = ComponentInfo.GetComponentByComponentID(_SelectedQCData.ComponentLot);
// 將量測資料記錄到客製表
var edcCompInfo = InfoCenter.Create <CSTEDCComponentInfo>();
edcCompInfo.ComponentID = _SelectedQCData.ComponentLot;
edcCompInfo.Data = measureVal;
edcCompInfo.UpSpecification = _SAICenterHole.Remark02.ToDecimal();
edcCompInfo.LowSpecification = _SAICenterHole.Remark03.ToDecimal();
edcCompInfo.INSPEC = inSpec == true ? "OK" : "NG";
edcCompInfo.Lot = (lotData == null) ? "" : lotData.CurrentLot;
edcCompInfo["LINKSID"] = txnStamp.LinkSID;
edcCompInfo["PARAMETER"] = "SC" + (i + 1).ToString();
edcCompInfo.InsertToDB(txnStamp.UserID, txnStamp.RecordTime);
});
#endregion
#region 更新機台狀態及更新檢驗單對應的批號資料
//如果選擇結果為NG時，則更新機台狀態及更新檢驗單對應的批號資料
if (rdbNG.Checked)
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("DOWN");
var equipData = EquipmentInfo.GetEquipmentByName(_SelectedQCData.EquipmentName);
//如果機台狀態為IDLE，則變更狀態為DOWN
if (equipData.CurrentState == "IDLE")
{
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
else
{
//如果機台狀態不為IDLE，則註記機台[USERDEFINECOL01]為Y
EMSTransaction.ModifyEquipmentSystemAttribute(equipData, "USERDEFINECOL01", "Y", txnStamp);
}
//上一次的檢驗單號資料
QCInspectionInfoEx previousInspectionData = null;
//依據機台及料號查詢，然後用建立時間逆排序，找出所有FAI及MPQC的檢驗單號資料
var QCDataList = QCInspectionInfoEx.GetInspDataListByEquipmentAndDevice(QCInsepctionData.EquipmentName, QCInsepctionData.DeviceName);
//如果筆數大於1，則目前檢驗單號的索引值
if (QCDataList.Count > 1)
{
//找出目前檢驗單號的索引值
var NGIndex = QCDataList.FindIndex(p => p.InspectionNo == QCInsepctionData.InspectionNo);
//如果找到的索引值不是最後一筆的話，則找出上一次的檢驗單號資料
if (NGIndex != (QCDataList.Count - 1))
{
//找出上一次的檢驗單號資料
previousInspectionData = QCDataList[NGIndex + 1];
}
}
//取得目前檢驗單號的批號子單元資料
var componentList = ComponentInfoEx.GetDataByInspectionNo(QCInsepctionData.InspectionNo);
componentList.ForEach(component =>
{
//取得批號資料
var lotData = LotInfo.GetLotByLot(component.CurrentLot);
//更新欄位[PQCNGFLAG]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGFLAG", "Y", txnStamp);
//更新欄位[PQCNGNO]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGNO", QCInsepctionData.InspectionNo, txnStamp);
});
if (previousInspectionData != null)
{
//取得上一次檢驗單號的批號子單元資料
var previousComponentList = ComponentInfoEx.GetDataByInspectionNo(previousInspectionData.InspectionNo);
//取得不需要註記的ComponentID
var passInspectionDataList = QCInspectionObjectInfo.GetInspectionObjects(previousInspectionData);
previousComponentList.ForEach(component =>
{
//確認是否為不需要註記的ComponentID
if (passInspectionDataList.FindIndex(p => p.ItemName1 == component.ComponentID) == -1)
{
//取得批號資料
var lotData = LotInfo.GetLotByLot(component.CurrentLot);
//更新欄位[PQCNGFLAG]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGFLAG", "Y", txnStamp);
//更新欄位[PQCNGNO]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGNO", QCInsepctionData.InspectionNo, txnStamp);
}
});
}
}
#endregion
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
/* 1. 如有不良數量，先確認有待判站。
* 2. 待判站找尋方式：到系統資料設定(MES_WPC_EXTENDITEM)裡找尋屬性SAIJudgeOperation，依照process找出待判站的名稱。如找不到要報錯。(找不到待判站資訊，請至系統資料維護增加資訊，屬性：xxxx。)
* 拿MES_WIP_LOT_PROCESS 跟系統資料設定裡的REMARK01比對後，找出工作站點(REMARK02)
* 3. 將批號出站。(CheckOut)
* 4. 將批號下機。(EQPRemoveLot)
* 5. 判定機台容量如果為0，將機台狀態變更為IDLE。(ChangeStaus)
* 機台容量判定方式：MES_EQP_EQP. CAPACITY = 0。
* 6. 將CST_WIP_RESERVE_CHECKIN_INFO搬移至CST_WIP_RESERVE_CHECKIN_INFO_LOG。
* 資料條件：Lot + Operation
* 7. 如有不良數量，拆一個不良批號，將批號送到待判站。(Defect、SplitLot、ReassignOperation)
* 8. 將原批號派送至下一規則。(Dispatch)
*/
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
//取得批號資料
var txnLotData = _LotData;
//取得批號上機台資料
var equipmentLotData = EquipmentLotInfo.GetEquipmentLotByLot(txnLotData.Lot);
//如果批號上機台是有資料，表示必須執行機台相關的交易
if (equipmentLotData != null)
{
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("IDLE");
var equipment = EquipmentInfo.GetEquipmentByName(txnLotData.ResourceName);
if (equipment == null)
{
//[00885]機台{0}不存在！
throw new Exception(TextMessage.Error.T00885(txnLotData.ResourceName));
}
//機台移批號
EMSTransaction.RemoveLotFromEquipment(txnLotData, equipment, txnStamp);
//確認機台的最大容量是否為零，如果不是，則執行變更機台狀態
if (equipment.Capacity == 0)
{
//變更機台狀態 Run=>IDLE
EMSTransaction.ChangeState(equipment, newStateInfo, txnStamp);
}
}
//更新預約資料
UpdateReserveCheckInData(txnLotData, txnLotData.OperationName, txnStamp);
//批號出站
WIPTransaction.CheckOut(txnLotData, txnStamp);
//如果有不良數量，則拆號及送待判工作站
if (_DefectGridData != null && _DefectGridData.Count > 0)
{
SplitDefectLotList(txnLotData, _DefectGridData, txnStamp);
}
//將批號Dispatch到下一規則
WIPTransaction.DispatchLot(txnLotData, txnStamp);
//檢查是否還有預約工作站資料
CheckNextReserveCheckIn(txnLotData, txnStamp);
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
#region 確認選擇結果，如果是選擇NG，確認是否有選擇原因碼
string result = "";
if (rdbOK.Checked)
{
result = "OK";
}
else if (rdbNG.Checked)
{
result = "NG";
//確認是否有選擇原因碼
ddlPQCReasonCode.Must(lblPQCReasonCode);
}
else if (rdbCLOSE.Checked)
{
result = "CLOSE";
//確認是否有選擇原因碼
ddlPQCReasonCode.Must(lblPQCReasonCode);
}
#endregion
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
#region 更新檢驗主檔[MES_QC_INSP]
//取得檢驗主檔資料
var QCInsepctionData = InfoCenter.GetBySID <QCInspectionInfo>(_SelectedQCData.QCInspectionSID).ChangeTo <QCInspectionInfoEx>();
//原因碼
ReasonCategoryInfo reason = null;
//有選擇原因碼才更新[NG_Category]及[NG_Reason]
if (string.IsNullOrEmpty(ddlPQCReasonCode.SelectedValue) == false)
{
reason = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlPQCReasonCode.SelectedValue);
QCInsepctionData.NG_Category = reason.Category;
QCInsepctionData.NG_Reason = reason.Reason;
}
//如果判定結果為結單的話，則必須把結單時間及人員資料寫回資料庫
if (result == "CLOSE")
{
QCInsepctionData.FINISHTIME = txnStamp.RecordTime;
QCInsepctionData.FINISHUSER = txnStamp.UserID;
}
QCInsepctionData.NG_Description = ttbDescr.Text;
QCInsepctionData.Result = result;
QCInsepctionData.Status = "Finished";
QCInsepctionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
#endregion
#region 更新機台檢驗主檔[CST_WIP_CMM]
if (_CSTWIPCMMList != null)
{
//更新檢驗主檔的QCInspectionSID欄位
_CSTWIPCMMList.ForEach(data =>
{
data.QCInspectionSID = QCInsepctionData.ID;
data.UpdateToDB();
});
}
#endregion
#region 更新機台狀態及更新檢驗單對應的批號資料
//如果選擇結果為NG時，則更新機台狀態及更新檢驗單對應的批號資料
if (rdbNG.Checked)
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("DOWN");
var equipData = EquipmentInfo.GetEquipmentByName(_SelectedQCData.EquipmentName);
//如果機台狀態為IDLE，則變更狀態為DOWN
if (equipData.CurrentState == "IDLE")
{
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
else
{
//如果機台狀態不為IDLE，則註記機台[USERDEFINECOL01]為Y
EMSTransaction.ModifyEquipmentSystemAttribute(equipData, "USERDEFINECOL01", "Y", txnStamp);
}
//上一次的檢驗單號資料
QCInspectionInfoEx previousInspectionData = null;
//依據機台及料號查詢，然後用建立時間逆排序，找出所有FAI及PQC的檢驗單號資料
var QCDataList = QCInspectionInfoEx.GetInspDataListByEquipmentAndDevice(QCInsepctionData.EquipmentName, QCInsepctionData.DeviceName);
//如果筆數大於1，則目前檢驗單號的索引值
if (QCDataList.Count > 1)
{
//找出目前檢驗單號的索引值
var NGIndex = QCDataList.FindIndex(p => p.InspectionNo == QCInsepctionData.InspectionNo);
//如果找到的索引值不是最後一筆的話，則找出上一次的檢驗單號資料
if (NGIndex != (QCDataList.Count - 1))
{
//找出上一次的檢驗單號資料
previousInspectionData = QCDataList[NGIndex + 1];
}
}
//取得目前檢驗單號的批號子單元資料
var componentList = ComponentInfoEx.GetDataByInspectionNo(QCInsepctionData.InspectionNo);
componentList.ForEach(component =>
{
//取得批號資料
var lotData = LotInfo.GetLotByLot(component.CurrentLot);
//更新欄位[PQCNGFLAG]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGFLAG", "Y", txnStamp);
//更新欄位[PQCNGNO]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGNO", QCInsepctionData.InspectionNo, txnStamp);
});
if (previousInspectionData != null)
{
//取得上一次檢驗單號的批號子單元資料
var previousComponentList = ComponentInfoEx.GetDataByInspectionNo(previousInspectionData.InspectionNo);
//取得不需要註記的ComponentID
var passInspectionDataList = QCInspectionObjectInfo.GetInspectionObjects(previousInspectionData);
previousComponentList.ForEach(component =>
{
//確認是否為不需要註記的ComponentID
if (passInspectionDataList.FindIndex(p => p.ItemName1 == component.ComponentID) == -1)
{
//取得批號資料
var lotData = LotInfo.GetLotByLot(component.CurrentLot);
//更新欄位[PQCNGFLAG]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGFLAG", "Y", txnStamp);
//更新欄位[PQCNGNO]
WIPTransaction.ModifyLotComponentSystemAttribute(lotData, component, "PQCNGNO", QCInsepctionData.InspectionNo, txnStamp);
}
});
}
}
#endregion
//如果判定結果選擇為NG，則必須拆批送待判
if (rdbNG.Checked)
{
//判定NG直接拆批及送待判工作站
CustomizeFunction.SplitDefectLot(_SelectedQCData.ComponentLot, ttbDescr.Text, reason, txnStamp);
}
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
/* 1. 檢查畫面上所有輸入欄位是否都已輸入。
* 2. 如為當站進站(批號狀態為Wait)，則將批號進站併上機台。(EquipmentAddLot、CheckIn、Dispatch)。
* 3. 如為預約進站，則將預約資訊塞入客製表，做批號備註。(AddComment)
* 4. 清空畫面，游標停在機加批號。
*/
string equipmentName = "";
EquipmentInfo equipData = null;
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
//檢查機台是否有輸入
if (ttbLot.Text.IsNullOrEmpty() || _LotData == null)
{
AjaxFocus(ttbLot);
throw new Exception(TextMessage.Error.T00030(GetUIResource("LotCheckInLot"), ""));
}
//如果機台下拉式清單Enabled為TRUE，則必須檢查是否有選擇機台
if (ddlEquip.Enabled)
{
ddlEquip.Must(lblEquip);
//取得機台資訊
equipData = EquipmentInfo.GetEquipmentByID(ddlEquip.SelectedValue);
//註記機台名稱
equipmentName = equipData.EquipmentName;
}
using (var cts = CimesTransactionScope.Create())
{
//批號狀態為Wait時，表示目前要執行進站
if (_LotData.Status == LotDefaultStatus.Wait.ToString())
{
CheckBom(_LotData.OperationName, equipData, _LotData);
if (equipData != null)
{
//批號上機台
EMSTxn.Default.AddLotToEquipment(_LotData, equipData, txnStamp);
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("RUN");
if (equipData.CurrentState != "RUN")
{
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
}
//批號進站
WIPTransaction.CheckIn(_LotData, equipmentName, "", "", LotDefaultStatus.Run.ToString(), txnStamp);
//將批號Dispatch到下一規則
WIPTransaction.DispatchLot(_LotData, txnStamp);
}
else
{
CheckBom(_WIPReserveCheckInData.OperationName, equipData, _LotData);
//執行預約進站功能
_WIPReserveCheckInData.Equipment = equipmentName;
_WIPReserveCheckInData.InTime = DBCenter.GetSystemTime();
_WIPReserveCheckInData.InsertToDB();
//做批號備註。(AddComment)
var reason = ReasonCategoryInfo.GetReasonCategoryByCategoryNameAndReason("CustomizeReason", "ReserveLotCheckIn");
var massage = "";
WIPTransaction.AddLotComment(_LotData, reason, massage, txnStamp);
}
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
/*******************************************************************
* PPK判定後須執行事項：
* 1. 依照判定的BATCHID+料號，將所屬單號資料更新。
* 2. 依照判定狀態更新CST_WIP_PPK結果。
* 3. 如同一個BATCHID都判定完成，變更機台狀態，從PPK變IDLE。
* 如一個BATCHID有兩個料號，需兩個料號都判定完成才可以變更機台狀態。
******************************************************************/
try
{
//取得所選擇的料號名稱
var deviceName = ddlDevice.SelectedValue;
#region 確認選擇結果，如果是選擇NG，確認是否有選擇原因碼及選擇結果及檢驗清單的勾選是否符合
string result = "";
if (rdbOK.Checked)
{
result = "OK";
}
else if (rdbNG.Checked)
{
result = "NG";
//確認是否有選擇原因碼
ddlPPKReasonCode.Must(lblPPKReasonCode);
if (SelectedNGData() == false)
{
//PPK結果選擇NG，檢驗清單至少勾選一筆資料！
throw new Exception(RuleMessage.Error.C10070());
}
}
else if (rdbCLOSE.Checked)
{
result = "CLOSE";
//確認是否有選擇原因碼
ddlPPKReasonCode.Must(lblPPKReasonCode);
}
#endregion
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
#region 更新檢驗主檔清單[MES_QC_INSP]
_QCInspectionDataList.ForEach(QCInspectionData =>
{
//符合選擇的料號才進行資料更新
if (QCInspectionData.DeviceName == deviceName)
{
//有選擇原因碼才更新[NG_Category]及[NG_Reason]
if (string.IsNullOrEmpty(ddlPPKReasonCode.SelectedValue) == false)
{
var reason = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlPPKReasonCode.SelectedValue);
QCInspectionData.NG_Category = reason.Category;
QCInspectionData.NG_Reason = reason.Reason;
}
//如果判定結果為結單的話，則必須把結單時間及人員資料寫回資料庫
if (result == "CLOSE")
{
QCInspectionData.FINISHTIME = txnStamp.RecordTime;
QCInspectionData.FINISHUSER = txnStamp.UserID;
}
QCInspectionData.NG_Description = ttbDescr.Text;
QCInspectionData.Result = result;
QCInspectionData.Status = "Finished";
QCInspectionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
}
});
#endregion
#region 更新機台資訊及檢驗工件結果
//取某一支工件序號的資料來傳入UpdatePPK
var updateLot = InfoCenter.GetBySID <LotInfo>(_QCInspectionObjDataList[0].OBJECTSID).ChangeTo <LotInfoEx>();
//更新[CST_WIP_PPK.PPKCOUNT]
CustomizeFunction.UpdatePPK(_QCInspectionDataList[0].EquipmentName, updateLot.DeviceName, updateLot.DeviceVersion, (rdbNG.Checked) ? "false" : "true");
//將介面上所勾選/不勾選的資料對應到MES_QC_INSP_OBJ.ITEM4的欄位
for (int i = 0; i < gvQC.Rows.Count; i++)
{
var thisCheckBox = (CheckBox)gvQC.Rows[i].FindControl("ckbDefectSelect");
if (thisCheckBox.Checked)
{
_QCInspectionObjDataList[i].ItemName4 = "NG";
}
else
{
_QCInspectionObjDataList[i].ItemName4 = "OK";
}
_QCInspectionObjDataList[i].UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
}
//更新機台檢驗主檔
_CSTWIPCMMList.ForEach(data =>
{
data.UpdateToDB();
});
//取得相同BatchID的檢驗資料 (理論上應該都完成檢驗...)
//如果是雙料號，每次判定要分料號判定
var QCDataList = QCInspectionInfoEx.GetDataListByBatchIDAndDeviceName(_QCInspectionDataList[0].BatchID, deviceName);
//如果是雙料號，每次判定要分料號判定，但是機台的狀態要該batchID都判定通過，才算PPK完成
var QCDAllataList = QCInspectionInfoEx.GetDataListByBatchID(_QCInspectionDataList[0].BatchID);
#region 如果相同的BatchID都檢驗完成時，則更新機台狀態為IDLE
//相同BatchID都已完成檢驗旗標
//如果是雙料號，每次判定要分料號判定，但是機台的狀態要該batchID都判定通過，才算PPK完成
bool isAllFinish = true;
QCDAllataList.ForEach(p =>
{
if (p.Status != "Finished")
{
isAllFinish = false;
}
});
if (isAllFinish)
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("IDLE");
//檢查機台是否存在
var equipData = EquipmentInfo.GetEquipmentByName(_QCInspectionDataList[0].EquipmentName);
if (equipData == null)
{
//[00885]機台{0}不存在！
throw new Exception(TextMessage.Error.T00885(_QCInspectionDataList[0].EquipmentName));
}
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
#endregion
#region 如果相同的BatchID都檢驗完成且結果都為OK時，則更新機台檢驗資料及更新COUNT
//相同BatchID都已完成檢驗及結果都為OK旗標
bool isAllFinishAndOK = true;
QCDataList.ForEach(p =>
{
if (!(p.Status == "Finished" && p.Result == "OK"))
{
isAllFinishAndOK = false;
}
});
if (isAllFinishAndOK)
{
//取得AutoMerge原因碼
var reasonCategory = ReasonCategoryInfo.GetReasonCategoryByCategoryNameAndReason("CustomizeReason", "AutoMerge");
if (reasonCategory == null)
{
//[00030]{0}：{1}不存在!
throw new Exception(TextMessage.Error.T00030("", "CustomizeReason- AutoMerge"));
}
_QCInspectionObjDataList.ForEach(Data =>
{
//更新機台檢驗資料
Data.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
});
var mergeList = _QCInspectionObjDataList.Select(p => p.ItemName2).Distinct().ToList();
foreach (var lot in mergeList)
{
var lotData = LotInfoEx.GetLotByWorkOrderLot(lot);
//確認FAI是否已經檢驗完成
if (CustomizeFunction.CheckFAI(_QCInspectionDataList[0].EquipmentName, lotData.Lot))
{
//執行AutoMerge
CustomizeFunction.AutoMerge(lotData.InventoryLot, txnStamp, reasonCategory);
}
}
}
#endregion
#endregion
cts.Complete();
}
ClearField();
AjaxFocus(ttbEquipOrCompLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}