public static void Example_DuplicateRam()
{
// Copy SPD contents from one DIMM to another
Device source = new Device("COM3", 80, SpdSize.DDR4);
Device destination = new Device("COM4", 82, source.SpdSize);
for (ushort i = 0; i < (int)source.SpdSize; i++)
{
Eeprom.WriteByte(destination, i, Eeprom.ReadByte(source, i));
}
// Verify contents
for (ushort i = 0; i < (int)source.SpdSize; i++)
{
if (Eeprom.ReadByte(source, i) != Eeprom.ReadByte(destination, i))
{
// Mismatched contents detected
}
}
}
static void ParseCommand(string[] args)
{
string mode = args[0];
if (mode == "/help")
{
ShowHelp();
return;
}
try {
// Setup
SerialPortSettings readerSettings = new SerialPortSettings(
115200,
true,
true,
8,
Handshake.None,
"\n",
Parity.None,
StopBits.One,
true,
10);
// Find
if (mode == "/find")
{
// Find
string[] devices = new Device(readerSettings).Find();
if (devices.Length > 0)
{
foreach (string portName in devices)
{
Console.WriteLine($"Found Device on Serial Port: {portName}\n");
}
}
else
{
throw new Exception("Nothing found");
}
return;
}
// Other functions that require additional parameters
if (mode != "/find" && args.Length >= 2)
{
// Init
string portName = args[1];
if (!portName.StartsWith("COM"))
{
throw new Exception("Port name should start with \"COM\" followed by a number.");
}
Device reader = new Device(readerSettings, portName);
if (!reader.Connect())
{
throw new Exception($"Could not connect to the device on port {portName}.");
}
if (reader.GetFirmwareVersion() < SpdReaderWriterDll.Settings.MINVERSION)
{
throw new Exception($"The device on port {portName} requires its firmware to be updated.");
}
//if (!reader.Test()) {
// throw new Exception($"The device on port {portName} does not respond.");
//}
// Scan
if (mode == "/scan")
{
byte[] addresses = reader.Scan();
if (addresses.Length == 0)
{
throw new Exception("No EEPROM devices found.");
}
foreach (int location in addresses)
{
Console.WriteLine($"Found EEPROM at address: {location}");
}
reader.Disconnect();
return;
}
// Test reversible write protection capabilities
if (mode == "/enablewriteprotection" || mode == "/disablewriteprotection")
{
if (!reader.TestAdvancedFeatures())
{
throw new Exception("Your device does not support write protection features.");
}
// Turn on write protection
if (mode == "/enablewriteprotection")
{
int[] block;
if (args.Length == 3) // Block # was specified
{
try {
block = new[] { (Int32.Parse(args[2])) };
}
catch {
throw new Exception("Block number should be specified in decimal notation.");
}
}
else // No block number specified, protect all available
{
if (Spd.GetRamType(reader) == RamType.DDR4)
{
block = new[] { 0, 1, 2, 3 };
}
else // DDR3 + DDR2
{
block = new[] { 0 };
}
}
reader.ResetAddressPins();
for (int i = 0; i < block.Length; i++)
{
if (Eeprom.SetWriteProtection(reader, i))
{
Console.WriteLine($"Block {i} is now read-only");
}
else
{
throw new Exception($"Unable to set write protection for block {i}. Either SA0 is not connected to HV, or the block is already read-only.");
}
}
return;
}
// Disable write protection
if (mode == "/disablewriteprotection")
{
reader.SetAddressPin(Pin.SA1, PinState.HIGH);
if (Eeprom.ClearWriteProtection(reader))
{
Console.WriteLine("Write protection successfully disabled.");
}
else
{
throw new Exception("Unable to clear write protection");
}
reader.ResetAddressPins();
return;
}
}
byte address;
try {
address = (byte)Int32.Parse(args[2]);
}
catch {
throw new Exception("EEPROM address should be specified in decimal notation.");
}
reader.I2CAddress = address;
reader.SpdSize = Spd.GetSpdSize(reader);
if (!reader.ProbeAddress())
{
throw new Exception($"EEPROM is not present at address {reader.I2CAddress}.");
}
string filePath = (args.Length >= 4) ? args[3] : "";
bool silent = (args.Length >= 5 && args[4] == "/silent") ? true : false;
// Read SPD contents
if (mode == "/read")
{
Console.Write($"Reading EEPROM at address {reader.I2CAddress} ({Spd.GetRamType(reader)})");
if (filePath != "")
{
Console.WriteLine($" to {filePath}");
}
Console.WriteLine("\n");
int startTick = Environment.TickCount;
byte[] spdDump = Eeprom.ReadByte(reader, 0, (int)reader.SpdSize);
for (int i = 0; i < spdDump.Length; i++)
{
if (!silent)
{
ConsoleDisplayByte(i, spdDump[i]);
}
}
Console.Write("\n\nRead {0} {1} from EEPROM at address {2} on port {3} in {4} ms",
spdDump.Length,
(spdDump.Length > 1) ? "bytes" : "byte",
reader.I2CAddress,
reader.PortName,
Environment.TickCount - startTick
);
if (filePath != "")
{
try {
File.WriteAllBytes(filePath, spdDump);
}
catch {
throw new Exception($"Unable to write to {filePath}");
}
Console.Write($" to file \"{filePath}\"");
}
reader.Disconnect();
return;
}
// Write contents to EEPROM
if (mode.StartsWith("/write"))
{
if (filePath.Length < 1)
{
throw new Exception("File path is mandatory for write mode.");
}
if (!File.Exists(filePath))
{
throw new Exception($"File \"{filePath}\" not found.");
}
byte[] inputFile;
try {
inputFile = File.ReadAllBytes(filePath);
}
catch {
throw new Exception($"Unable to read {filePath}");
}
Console.WriteLine(
"Writing \"{0}\" ({1} {2}) to EEPROM at address {3}\n",
filePath,
inputFile.Length,
(inputFile.Length > 1) ? "bytes" : "byte",
reader.I2CAddress);
if (inputFile.Length > (int)reader.SpdSize)
{
throw new Exception($"File \"{filePath}\" is larger than {reader.SpdSize} bytes.");
}
int bytesWritten = 0;
int startTick = Environment.TickCount;
byte b;
for (int i = 0; i != inputFile.Length; i++)
{
b = inputFile[i];
bool writeResult = (mode == "/writeforce")
? Eeprom.WriteByte(reader, (ushort)i, inputFile[i])
: Eeprom.UpdateByte(reader, (ushort)i, inputFile[i]);
if (!writeResult)
{
throw new Exception($"Could not write byte {i} to EEPROM at address {reader.I2CAddress} on port {reader.PortName}.");
}
bytesWritten++;
if (!silent)
{
ConsoleDisplayByte(i, b);
}
}
reader.Disconnect();
Console.WriteLine(
"\n\nWritten {0} {1} to EEPROM at address {2} on port {3} in {4} ms",
bytesWritten,
(bytesWritten > 1) ? "bytes" : "byte",
reader.I2CAddress,
reader.PortName,
Environment.TickCount - startTick);
return;
}
if (mode == "/enablepermanentwriteprotection")
{
if (Eeprom.SetPermanentWriteProtection(reader))
{
Console.WriteLine($"Permanent write protection enabled on {reader.PortName}:{reader.I2CAddress}");
}
else
{
throw new Exception($"Unable to set permanent write protection on {reader.PortName}:{reader.I2CAddress}");
}
}
}
}
catch (Exception e) {
//Console.ForegroundColor = ConsoleColor.Red;
#if DEBUG
Console.WriteLine($"{e}\n");
#else
Console.WriteLine($"{e.Message}\n");
#endif
//Console.ForegroundColor = ConsoleColor.Gray;
return;
}
Console.WriteLine("Unknown command line parameters.\n");
ShowHelp();
}