/// <summary>
/// Read word from device via SMBus on EV2300.
/// </summary>
/// <param name="SMBusCmd">Device command to read.</param>
/// <param name="SMBusWord">Read back device word.</param>
/// <param name="targetAddr">Device target address.</param>
/// <returns>EV2300 error code.</returns>
public EV23KError ReadSMBusWord(short SMBusCmd, out short SMBusWord, short targetAddr)
{
try
{
SMBusWord = 0;
short nWord = 0;
if (!isPresent)
{
return(EV23KError.NoUSB);
}
EV23KError err = (EV23KError)EV23KBoard.ReadSMBusWord(SMBusCmd, ref nWord, targetAddr);
if (err != EV23KError.NoError)
{
return(err);
}
SMBusWord = nWord;
return(EV23KError.NoError);
}
catch (Exception ex)
{
throw new ArgumentException(ex.Message);
}
}
/// <summary>
/// Initialize when main window was loaded.
/// </summary>
/// <param name="sender">Not used.</param>
/// <param name="e">Not used.</param>
private void MainWindow_Loaded(object sender, RoutedEventArgs e)
{
CfgCycleCellCount.Text = Properties.Settings.Default.CellCount;
CfgCycleTaperCurr.Text = Properties.Settings.Default.TaperCurrent;
CfgCycleTermVolt.Text = Properties.Settings.Default.TerminationVoltage;
CfgCycleChargeRelaxHours.Text = Properties.Settings.Default.ChargeRelaxHours;
CfgCycleDischargeRelaxHours.Text = Properties.Settings.Default.DischargeRelaxHours;
try
{
int BrdsNumber = 0;
string BrdsName = "";
if (board.Connect(out BrdsNumber, out BrdsName) != 0)
{
throw new ArgumentException("EV2300 not found.");
}
LogView.AddEntry("EV2300 connected...");
Console.WriteLine(BrdsName);
EV23KError err = board.CheckForError();
gauge = new GaugeInfo(board);
UpdateGui(null, null);
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
}
/// <summary>
/// Read data block from device via SMBus on EV2300.
/// </summary>
/// <param name="SMBusCmd">Device command to write.</param>
/// <param name="DataBlock">Variable to store data block in.</param>
/// <param name="BlockLength">Read length of data block</param>
/// <param name="targetAddr">Device target address.</param>
/// <returns>EV2300 error code.</returns>
public EV23KError ReadSMBusBlock(short SMBusCmd, out object DataBlock, out short BlockLength, short targetAddr)
{
try
{
DataBlock = null;
BlockLength = 0;
short len = 0;
object data = null;
if (!isPresent)
{
return(EV23KError.NoUSB);
}
EV23KError err = (EV23KError)EV23KBoard.ReadSMBusBlock(SMBusCmd, ref data, ref len, targetAddr);
if (err != EV23KError.NoError)
{
return(err);
}
DataBlock = data;
BlockLength = len;
return(EV23KError.NoError);
}
catch (Exception ex)
{
throw new ArgumentException(ex.Message);
}
}
/// <summary>
/// Write specific device register using methode defined in configuration.
/// </summary>
/// <param name="caption">Register name to write.</param>
/// <returns>EV2300 error code.</returns>
/// <remarks>For now only works to set the ManufacturerAccess command.</remarks>
private EV23KError WriteDevice(string caption)
{
EV23KError err = EV23KError.Unknown;
object dataBlock = null;
short dataLength = 0;
SbsCommandItem c = sbsItems.SbsCommands.Find(x => x.Caption == caption);
if (c != null)
{
if (c.WriteStyle == 1)
{
err = EV23KBoard.WriteSMBusWord(0, c.Command, sbsItems.TargetAdress);
}
else if (c.WriteStyle == 2)
{
err = EV23KBoard.ReadManufacturerAccessBlock(sbsItems.TargetMacAdress, c.Command, out dataBlock, out dataLength, sbsItems.TargetAdress);
if (c.HasResult && err == EV23KError.NoError)
{
c.GetRawValueFromDataBlock(dataBlock, dataLength, c.OffsetWithinBlock, c.LengthWithinBlock);
c.CalculateDisplayValue();
}
}
}
return(err);
}
/// <summary>
/// Read specific device register using methode defined in configuration.
/// </summary>
/// <param name="caption">Register name to read.</param>
/// <returns>EV2300 error code.</returns>
private EV23KError ReadDevice(string caption)
{
EV23KError err = EV23KError.Unknown;
short dataWord = 0;
object dataBlock = null;
short dataLength = 0;
SbsRegisterItem i = sbsItems.SbsRegister.Find(x => x.Caption == caption);
if (i != null)
{
if (i.ReadStyle == 1)
{
err = (EV23KError)EV23KBoard.ReadSMBusWord(i.Command, out dataWord, sbsItems.TargetAdress);
if (err == EV23KError.NoError)
{
i.RawValue = dataWord;
i.CalculateBitFields();
i.CalculateDisplayValue();
}
}
else if (i.ReadStyle == 2)
{
if (!i.IsMac)
{
err = (EV23KError)EV23KBoard.ReadSMBusBlock(i.Command, out dataBlock, out dataLength, sbsItems.TargetAdress);
if (err == EV23KError.NoError)
{
i.GetRawValueFromDataBlock(dataBlock, dataLength, i.OffsetWithinBlock, i.LengthWithinBlock);
i.CalculateBitFields();
i.CalculateDisplayValue();
}
}
else
{
err = (EV23KError)EV23KBoard.ReadManufacturerAccessBlock(sbsItems.TargetMacAdress, i.Command, out dataBlock, out dataLength, sbsItems.TargetAdress);
if (err == EV23KError.NoError)
{
i.GetRawValueFromDataBlock(dataBlock, dataLength, i.OffsetWithinBlock, i.LengthWithinBlock);
i.CalculateBitFields();
i.CalculateDisplayValue();
}
}
}
else if (i.ReadStyle == 3)
{
err = (EV23KError)EV23KBoard.ReadManufacturerAccessBlock(sbsItems.TargetMacAdress, i.Command, out dataBlock, out dataLength, sbsItems.TargetAdress);
if (err == EV23KError.NoError)
{
i.GetRawValueFromDataBlock(dataBlock, dataLength, i.OffsetWithinBlock, i.LengthWithinBlock);
i.CalculateBitFields();
i.CalculateDisplayValue();
}
}
}
return(err);
}
/// <summary>
/// Read entire dataflash content into buffer.
/// </summary>
/// <param name="MacAddr">Manufacturer access command.</param>
/// <param name="DataBlock">Flash data block.</param>
/// <param name="BlockLength">Flash data block length.</param>
/// <param name="targetAddr">Target device address.</param>
/// <returns>EV2300 error code.</returns>
/// <remarks>For dataflash access see SLUUBT5, chapter 18.1.75</remarks>
public EV23KError ReadDataflash(short MacAddr, out object DataBlock, out int BlockLength, short targetAddr)
{
try
{
DataBlock = null;
BlockLength = 0;
short datalen = 32;
object data = null;
IEnumerable <byte> df = null;
if (!isPresent)
{
return(EV23KError.NoUSB);
}
byte[] cmd = { 0x00, 0x40 };
EV23KError err = (EV23KError)EV23KBoard.WriteSMBusBlock(MacAddr, cmd, (short)2, (short)(targetAddr - 1));
if (err != EV23KError.NoError)
{
return(err);
}
err = (EV23KError)EV23KBoard.ReadSMBusBlock(MacAddr, ref data, ref datalen, targetAddr);
if (err == EV23KError.NoError)
{
df = ((byte[])data).Skip(2); // Skip first two address bytes, copy only flash data
}
for (int i = 1; i < 103; i++)
{
data = null;
datalen = 0;
err = (EV23KError)EV23KBoard.ReadSMBusBlock(MacAddr, ref data, ref datalen, targetAddr);
if (err == EV23KError.NoError)
{
df = df.Concat(((byte[])data).Skip(2)); // Skip frst two address bytes, concat only flash data
}
else
{
return(err);
}
}
DataBlock = df.ToArray();
BlockLength = df.Count();
return(EV23KError.NoError);
}
catch (Exception ex)
{
throw new ArgumentException(ex.Message);
}
}
/// <summary>
/// Connect to EV2300 board.
/// </summary>
/// <param name="BrdsNumber">Board numbers found and connected to.</param>
/// <param name="BrdsName">Connected board name.</param>
/// <returns>EV2300 error code</returns>
public EV23KError Connect(out int BrdsNumber, out string BrdsName)
{
try
{
BrdsNumber = 0;
BrdsName = "";
object obj = null;
short len = 0, ver = 0, rev = 0;
EV23KBoard.GetFreeBoards(1, ref BrdsNumber, ref BrdsName);
if (BrdsNumber <= 0)
{
return(EV23KError.IncorrectParameter);
}
BrdsName = BrdsName.Substring(0, BrdsName.Length - 1);
EV23KError err = (EV23KError)EV23KBoard.OpenDevice(ref BrdsName);
if (err == EV23KError.NoError)
{
timerCheckStatus.Enabled = true;
CheckStatus(null, null);
err = (EV23KError)EV23KBoard.GetEV2300Name(ref obj, ref len);
if (name != null)
{
name = Encoding.ASCII.GetString((byte[])obj);
int i = name.IndexOf('\0');
if (i >= 0)
{
name = name.Substring(0, i);
}
}
err = (EV23KError)EV23KBoard.GetEV2300Version(ref ver, ref rev);
if (err == EV23KError.NoError)
{
version = Encoding.ASCII.GetString(new byte[] { (byte)((ver & 0xff00) >> 8), 0x2E, (byte)(ver & 0x00ff), (byte)rev });
}
err = (EV23KError)EV23KBoard.GPIOWrite(0x7FF, 0);
}
return(err);
}
catch (Exception ex)
{
throw new ArgumentException(ex.Message);
}
}
/// <summary>
/// Toogle EV2300 GPIO pin.
/// </summary>
/// <param name="gpio">GPIO pin mask to toggle.</param>
/// <returns>EV2300 error code.</returns>
public EV23KError GpioToggle(EV23KGpioMask gpio)
{
if (!isPresent)
{
return(EV23KError.NoUSB);
}
short data = 0;
EV23KError err = (EV23KError)EV23KBoard.GPIORead((short)gpio, ref data);
if (err == EV23KError.NoError)
{
data = (short)~data;
err = (EV23KError)EV23KBoard.GPIOWrite((short)gpio, data);
}
return(err);
}
/// <summary>
/// Check present status of EV2300 board.
/// </summary>
/// <param name="sender">Not used</param>
/// <param name="e">Not used</param>
private void CheckStatus(object sender, System.EventArgs e)
{
try
{
EV23KError err = (EV23KError)EV23KBoard.GPIOMask(0);
if (err == EV23KError.NoUSB)
{
isPresent = false;
}
else
{
isPresent = true;
}
} catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
}
/// <summary>
/// Read manufacturer access block from device via SMBus on EV2300.
/// </summary>
/// <param name="MacAddr">Manufacturer Access address/command.</param>
/// <param name="Cmd">Manufacturer Access command/register to read.</param>
/// <param name="DataBlock">Variable to store data block in.</param>
/// <param name="BlockLength">Read length of data block</param>
/// <param name="targetAddr">Device target address.</param>
/// <returns>EV2300 error code.</returns>
public EV23KError ReadManufacturerAccessBlock(short MacAddr, short Cmd, out object DataBlock, out short BlockLength, short targetAddr)
{
try
{
DataBlock = null;
BlockLength = 0;
short len = 0;
object data = null;
if (!isPresent)
{
return(EV23KError.NoUSB);
}
byte[] cmd = { (byte)(Cmd & 0xFF), (byte)((Cmd & 0xFF00) >> 8) };
EV23KError err = (EV23KError)EV23KBoard.WriteSMBusBlock(MacAddr, cmd, (short)2, (short)(targetAddr - 1));
if (err != EV23KError.NoError)
{
return(err);
}
err = (EV23KError)EV23KBoard.ReadSMBusBlock(MacAddr, ref data, ref len, targetAddr);
if (err != EV23KError.NoError)
{
return(err);
}
DataBlock = data;
BlockLength = len;
return(EV23KError.NoError);
}
catch (Exception ex)
{
throw new ArgumentException(ex.Message);
}
}
/// <summary>
/// Read entire data flash from device if not already present.
/// </summary>
private void ReadDataflash()
{
if (isDataflashAvail)
{
return;
}
EV23KError err = EV23KError.Unknown;
object dataBlock = null;
int dataLength = 0;
if (EV23KBoard.IsPresent)
{
err = EV23KBoard.ReadDataflash(sbsItems.TargetMacAdress, out dataBlock, out dataLength, sbsItems.TargetAdress);
if (err == EV23KError.NoError)
{
bcfgItems.CreateDataflashModel(dataBlock, dataLength);
isDataflashAvail = true;
}
}
return;
}
