public void MeasurementConversions()
{
//feet tests
var foot = new DynamoLength <Foot>(1.25);
Assert.AreEqual("1' 3\"", foot.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_FEET_INCHES));
Assert.AreEqual("15\"", foot.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_INCHES));
foot.FromDisplayString("1' 3\"", DynamoUnitDisplayType.FRACTIONAL_FEET_INCHES);
Assert.AreEqual(1.25, foot.Item.Length);
foot.Item.Length = 1.16667;
Assert.AreEqual("1' 2\"", foot.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_FEET_INCHES));
//inch tests
var inch = new DynamoLength <Inch>(12.0);
Assert.AreEqual(string.Format("{0} cm", (30.48).ToString(CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.CENTIMETERS));
Assert.AreEqual(string.Format("{0} ft", (1.0).ToString("0.00", CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.DECIMAL_FEET));
Assert.AreEqual(string.Format("{0} in", (12.00).ToString("0.00", CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.DECIMAL_INCHES));
Assert.AreEqual("1' 0\"", inch.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_FEET_INCHES));
Assert.AreEqual("12\"", inch.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_INCHES));
Assert.AreEqual(string.Format("{0} m", (0.30).ToString("0.00", CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.METERS));
Assert.AreEqual(string.Format("{0} mm", (304.80).ToString("0.00", CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.MILLIMETERS));
//test inches internal unit storage
inch.FromDisplayString("1' 2 1/2\"", DynamoUnitDisplayType.FRACTIONAL_INCHES);
Assert.AreEqual(14.5, inch.Item.Length, 0.0001);
inch.FromDisplayString("14 1/2\"", DynamoUnitDisplayType.FRACTIONAL_INCHES);
Assert.AreEqual(14.5, inch.Item.Length, 0.0001);
}
public dynLengthInput()
{
//Create a measure to coincide with Revit's internal project units
_measure = new DynamoLength <Foot>(0.0);
OutPortData.Add(new PortData("length", "The length. Stored internally as decimal feet.", typeof(Value.Number)));
RegisterAllPorts();
}
public void CreateAndConvertMeters()
{
var mLength = new DynamoLength <Meter>(1.0);
Assert.AreEqual(1000.0, mLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS), 0.001);
Assert.AreEqual(100.0, mLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS), 0.001);
Assert.AreEqual(1.0, mLength.Item.ConvertTo(DynamoUnitType.METERS), 0.001);
Assert.AreEqual(39.370079, mLength.Item.ConvertTo(DynamoUnitType.INCHES), 0.001);
Assert.AreEqual(3.28084, mLength.Item.ConvertTo(DynamoUnitType.FEET), 0.001);
Assert.AreEqual("1.00 m", mLength.ToString());
}
public void CreateAndConvertCentimeters()
{
var cmLength = new DynamoLength <Centimeter>(1.0);
Assert.AreEqual(10.0, cmLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS), 0.001);
Assert.AreEqual(1.0, cmLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS), 0.001);
Assert.AreEqual(.01, cmLength.Item.ConvertTo(DynamoUnitType.METERS), 0.001);
Assert.AreEqual(.39371, cmLength.Item.ConvertTo(DynamoUnitType.INCHES), 0.001);
Assert.AreEqual(.032808, cmLength.Item.ConvertTo(DynamoUnitType.FEET), 0.001);
Assert.AreEqual("1.00 cm", cmLength.ToString());
}
public void CreateAndConvertMillimeters()
{
var mmLength = new DynamoLength <Millimeter>(1.0);
Assert.AreEqual(1.0, mmLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS), 0.001);
Assert.AreEqual(.1, mmLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS), 0.001);
Assert.AreEqual(.001, mmLength.Item.ConvertTo(DynamoUnitType.METERS), 0.001);
Assert.AreEqual(.03937, mmLength.Item.ConvertTo(DynamoUnitType.INCHES), 0.001);
Assert.AreEqual(.003281, mmLength.Item.ConvertTo(DynamoUnitType.FEET), 0.001);
Assert.AreEqual("1.00 mm", mmLength.ToString());
}
public void CreateAndConvertCentimeters()
{
var cmLength = new DynamoLength<Centimeter>(1.0);
Assert.AreEqual(10.0, cmLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS), 0.001);
Assert.AreEqual(1.0, cmLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS), 0.001);
Assert.AreEqual(.01, cmLength.Item.ConvertTo(DynamoUnitType.METERS), 0.001);
Assert.AreEqual(.39371, cmLength.Item.ConvertTo(DynamoUnitType.INCHES), 0.001);
Assert.AreEqual(.032808, cmLength.Item.ConvertTo(DynamoUnitType.FEET), 0.001);
Assert.AreEqual("1.00 cm", cmLength.ToString());
}
public dynLengthInput()
{
//Create a measure to coincide with Revit's internal project units
_measure = new DynamoLength<Foot>(0.0);
OutPortData.Add(new PortData("length", "The length. Stored internally as decimal feet.", typeof(Value.Number)));
RegisterAllPorts();
}
public void CreateAndConvertInches()
{
var inchLength = new DynamoLength <Inch>(1.25);
//test positive cases
var mm = inchLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS);
Assert.AreEqual(25.4 * 1.25, mm, 0.001);
var cm = inchLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS);
Assert.AreEqual(2.54 * 1.25, cm, 0.001);
var m = inchLength.Item.ConvertTo(DynamoUnitType.METERS);
Assert.AreEqual(0.0254 * 1.25, m, 0.001);
var inch = inchLength.Item.ConvertTo(DynamoUnitType.INCHES);
Assert.AreEqual(1.0 * 1.25, inch, 0.001);
var ft = inchLength.Item.ConvertTo(DynamoUnitType.FEET);
Assert.AreEqual(0.083333 * 1.25, ft, 0.001);
Assert.AreEqual("1 1/4\"", inchLength.ToString());
//test negative cases
inchLength.Item.Length = -1.25;
mm = inchLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS);
Assert.AreEqual(-25.4 * 1.25, mm, 0.001);
cm = inchLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS);
Assert.AreEqual(-2.54 * 1.25, cm, 0.001);
m = inchLength.Item.ConvertTo(DynamoUnitType.METERS);
Assert.AreEqual(-0.0254 * 1.25, m, 0.001);
inch = inchLength.Item.ConvertTo(DynamoUnitType.INCHES);
Assert.AreEqual(-1.0 * 1.25, inch, 0.001);
ft = inchLength.Item.ConvertTo(DynamoUnitType.FEET);
Assert.AreEqual(-0.083333 * 1.25, ft, 0.001);
Assert.AreEqual("-1 1/4\"", inchLength.ToString());
//test just the fractional case
inchLength.Item.Length = .25;
Assert.AreEqual("1/4\"", inchLength.ToString());
inchLength.Item.Length = -.25;
Assert.AreEqual("-1/4\"", inchLength.ToString());
//test just the whole case
inchLength.Item.Length = 1.0;
Assert.AreEqual("1\"", inchLength.ToString());
inchLength.Item.Length = -1.0;
Assert.AreEqual("-1\"", inchLength.ToString());
//test some edge cases
inchLength.Item.Length = 0.0;
Assert.AreEqual("0\"", inchLength.ToString());
inchLength.Item.Length = 0.01;
Assert.AreEqual("1/64\"", inchLength.ToString());
inchLength.Item.Length = 0.99;
Assert.AreEqual("1\"", inchLength.ToString());
}
public void CreateAndConvertFeet()
{
var ftLength = new DynamoLength <Foot>(1.3177);
//test positive cases
var mm = ftLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS);
Assert.AreEqual(304.8 * 1.3177, mm, 0.001);
var cm = ftLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS);
Assert.AreEqual(30.48 * 1.3177, cm, 0.001);
var m = ftLength.Item.ConvertTo(DynamoUnitType.METERS);
Assert.AreEqual(.3048 * 1.3177, m, 0.001);
var inch = ftLength.Item.ConvertTo(DynamoUnitType.INCHES);
Assert.AreEqual(12.0 * 1.3177, inch, 0.001);
var ft = ftLength.Item.ConvertTo(DynamoUnitType.FEET);
Assert.AreEqual(1.0 * 1.3177, ft, 0.001);
Assert.AreEqual("1' 3 13/16\"", ftLength.ToString());
//test negative cases
ftLength.Item.Length = -1.3177;
mm = ftLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS);
Assert.AreEqual(-304.8 * 1.3177, mm, 0.001);
cm = ftLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS);
Assert.AreEqual(-30.48 * 1.3177, cm, 0.001);
m = ftLength.Item.ConvertTo(DynamoUnitType.METERS);
Assert.AreEqual(-.3048 * 1.3177, m, 0.001);
inch = ftLength.Item.ConvertTo(DynamoUnitType.INCHES);
Assert.AreEqual(-12.0 * 1.3177, inch, 0.001);
ft = ftLength.Item.ConvertTo(DynamoUnitType.FEET);
Assert.AreEqual(-1.0 * 1.3177, ft, 0.001);
Assert.AreEqual("-1' 3 13/16\"", ftLength.ToString());
//test just the fractional case
ftLength.Item.Length = .25;
Assert.AreEqual("3\"", ftLength.ToString());
ftLength.Item.Length = -.25;
Assert.AreEqual("-3\"", ftLength.ToString());
//test just the whole case
ftLength.Item.Length = 1.0;
Assert.AreEqual("1' 0\"", ftLength.ToString());
ftLength.Item.Length = -1.0;
Assert.AreEqual("-1' 0\"", ftLength.ToString());
//test some edge cases
ftLength.Item.Length = 0.0;
Assert.AreEqual("0' 0\"", ftLength.ToString());
ftLength.Item.Length = 0.01;
Assert.AreEqual("1/8\"", ftLength.ToString());
ftLength.Item.Length = 0.99;
Assert.AreEqual("11 57/64\"", ftLength.ToString());
ftLength.Item.Length = 0.9999;
Assert.AreEqual("1'", ftLength.ToString());
}
public void CreateAndConvertFeet()
{
var ftLength = new DynamoLength<Foot>(1.3177);
//test positive cases
var mm = ftLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS);
Assert.AreEqual(304.8 * 1.3177, mm, 0.001);
var cm = ftLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS);
Assert.AreEqual(30.48 * 1.3177, cm, 0.001);
var m = ftLength.Item.ConvertTo(DynamoUnitType.METERS);
Assert.AreEqual(.3048 * 1.3177, m, 0.001);
var inch = ftLength.Item.ConvertTo(DynamoUnitType.INCHES);
Assert.AreEqual(12.0 * 1.3177, inch, 0.001);
var ft = ftLength.Item.ConvertTo(DynamoUnitType.FEET);
Assert.AreEqual(1.0 * 1.3177, ft, 0.001);
Assert.AreEqual("1' 3 13/16\"", ftLength.ToString());
//test negative cases
ftLength.Item.Length = -1.3177;
mm = ftLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS);
Assert.AreEqual(-304.8 * 1.3177, mm, 0.001);
cm = ftLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS);
Assert.AreEqual(-30.48 * 1.3177, cm, 0.001);
m = ftLength.Item.ConvertTo(DynamoUnitType.METERS);
Assert.AreEqual(-.3048 * 1.3177, m, 0.001);
inch = ftLength.Item.ConvertTo(DynamoUnitType.INCHES);
Assert.AreEqual(-12.0 * 1.3177, inch, 0.001);
ft = ftLength.Item.ConvertTo(DynamoUnitType.FEET);
Assert.AreEqual(-1.0 * 1.3177, ft, 0.001);
Assert.AreEqual("-1' 3 13/16\"", ftLength.ToString());
//test just the fractional case
ftLength.Item.Length = .25;
Assert.AreEqual("3\"", ftLength.ToString());
ftLength.Item.Length = -.25;
Assert.AreEqual("-3\"", ftLength.ToString());
//test just the whole case
ftLength.Item.Length = 1.0;
Assert.AreEqual("1' 0\"", ftLength.ToString());
ftLength.Item.Length = -1.0;
Assert.AreEqual("-1' 0\"", ftLength.ToString());
//test some edge cases
ftLength.Item.Length = 0.0;
Assert.AreEqual("0' 0\"", ftLength.ToString());
ftLength.Item.Length = 0.01;
Assert.AreEqual("1/8\"", ftLength.ToString());
ftLength.Item.Length = 0.99;
Assert.AreEqual("11 57/64\"", ftLength.ToString());
ftLength.Item.Length = 0.9999;
Assert.AreEqual("1'", ftLength.ToString());
}
public void MeasurementConversions()
{
//feet tests
var foot = new DynamoLength<Foot>(1.25);
Assert.AreEqual("1' 3\"", foot.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_FEET_INCHES));
Assert.AreEqual("15\"", foot.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_INCHES));
foot.FromDisplayString("1' 3\"", DynamoUnitDisplayType.FRACTIONAL_FEET_INCHES);
Assert.AreEqual(1.25, foot.Item.Length);
foot.Item.Length = 1.16667;
Assert.AreEqual("1' 2\"", foot.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_FEET_INCHES));
//inch tests
var inch = new DynamoLength<Inch>(12.0);
Assert.AreEqual(string.Format("{0} cm", (30.48).ToString(CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.CENTIMETERS));
Assert.AreEqual(string.Format("{0} ft", (1.0).ToString("0.00", CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.DECIMAL_FEET));
Assert.AreEqual(string.Format("{0} in", (12.00).ToString("0.00", CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.DECIMAL_INCHES));
Assert.AreEqual("1' 0\"", inch.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_FEET_INCHES));
Assert.AreEqual("12\"", inch.ToDisplayString(DynamoUnitDisplayType.FRACTIONAL_INCHES));
Assert.AreEqual(string.Format("{0} m", (0.30).ToString("0.00", CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.METERS));
Assert.AreEqual(string.Format("{0} mm", (304.80).ToString("0.00", CultureInfo.CurrentCulture)), inch.ToDisplayString(DynamoUnitDisplayType.MILLIMETERS));
//test inches internal unit storage
inch.FromDisplayString("1' 2 1/2\"", DynamoUnitDisplayType.FRACTIONAL_INCHES);
Assert.AreEqual(14.5, inch.Item.Length, 0.0001);
inch.FromDisplayString("14 1/2\"", DynamoUnitDisplayType.FRACTIONAL_INCHES);
Assert.AreEqual(14.5, inch.Item.Length, 0.0001);
}
public void CreateAndConvertMillimeters()
{
var mmLength = new DynamoLength<Millimeter>(1.0);
Assert.AreEqual(1.0, mmLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS), 0.001);
Assert.AreEqual(.1, mmLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS), 0.001);
Assert.AreEqual(.001, mmLength.Item.ConvertTo(DynamoUnitType.METERS), 0.001);
Assert.AreEqual(.03937, mmLength.Item.ConvertTo(DynamoUnitType.INCHES), 0.001);
Assert.AreEqual(.003281, mmLength.Item.ConvertTo(DynamoUnitType.FEET), 0.001);
Assert.AreEqual("1.00 mm", mmLength.ToString());
}
public void CreateAndConvertMeters()
{
var mLength = new DynamoLength<Meter>(1.0);
Assert.AreEqual(1000.0, mLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS), 0.001);
Assert.AreEqual(100.0, mLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS), 0.001);
Assert.AreEqual(1.0, mLength.Item.ConvertTo(DynamoUnitType.METERS), 0.001);
Assert.AreEqual(39.370079, mLength.Item.ConvertTo(DynamoUnitType.INCHES), 0.001);
Assert.AreEqual(3.28084, mLength.Item.ConvertTo(DynamoUnitType.FEET), 0.001);
Assert.AreEqual("1.00 m", mLength.ToString());
}
public void CreateAndConvertInches()
{
var inchLength = new DynamoLength<Inch>(1.25);
//test positive cases
var mm = inchLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS);
Assert.AreEqual(25.4 * 1.25, mm, 0.001);
var cm = inchLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS);
Assert.AreEqual(2.54 * 1.25, cm, 0.001);
var m = inchLength.Item.ConvertTo(DynamoUnitType.METERS);
Assert.AreEqual(0.0254 * 1.25, m, 0.001);
var inch = inchLength.Item.ConvertTo(DynamoUnitType.INCHES);
Assert.AreEqual(1.0 * 1.25, inch, 0.001);
var ft = inchLength.Item.ConvertTo(DynamoUnitType.FEET);
Assert.AreEqual(0.083333 * 1.25, ft, 0.001);
Assert.AreEqual("1 1/4\"", inchLength.ToString());
//test negative cases
inchLength.Item.Length = -1.25;
mm = inchLength.Item.ConvertTo(DynamoUnitType.MILLIMETERS);
Assert.AreEqual(-25.4 * 1.25, mm, 0.001);
cm = inchLength.Item.ConvertTo(DynamoUnitType.CENTIMETERS);
Assert.AreEqual(-2.54 * 1.25, cm, 0.001);
m = inchLength.Item.ConvertTo(DynamoUnitType.METERS);
Assert.AreEqual(-0.0254 * 1.25, m, 0.001);
inch = inchLength.Item.ConvertTo(DynamoUnitType.INCHES);
Assert.AreEqual(-1.0 * 1.25, inch, 0.001);
ft = inchLength.Item.ConvertTo(DynamoUnitType.FEET);
Assert.AreEqual(-0.083333 * 1.25, ft, 0.001);
Assert.AreEqual("-1 1/4\"", inchLength.ToString());
//test just the fractional case
inchLength.Item.Length = .25;
Assert.AreEqual("1/4\"", inchLength.ToString());
inchLength.Item.Length = -.25;
Assert.AreEqual("-1/4\"", inchLength.ToString());
//test just the whole case
inchLength.Item.Length = 1.0;
Assert.AreEqual("1\"", inchLength.ToString());
inchLength.Item.Length = -1.0;
Assert.AreEqual("-1\"", inchLength.ToString());
//test some edge cases
inchLength.Item.Length = 0.0;
Assert.AreEqual("0\"", inchLength.ToString());
inchLength.Item.Length = 0.01;
Assert.AreEqual("1/64\"", inchLength.ToString());
inchLength.Item.Length = 0.99;
Assert.AreEqual("1\"", inchLength.ToString());
}
