public static void Populate(ISimulationObject obj, DynamicLayout container)
{
var su = obj.GetFlowsheet().FlowsheetOptions.SelectedUnitSystem;
var nf = obj.GetFlowsheet().FlowsheetOptions.NumberFormat;
var recycle = (EnergyRecycle)obj;
s.CreateAndAddLabelRow(container, "Object Details");
s.CreateAndAddTwoLabelsRow(container, "Status", obj.GraphicObject.Active ? "Active" : "Inactive");
s.CreateAndAddStringEditorRow(container, "Name", obj.GraphicObject.Tag, (TextBox arg3, EventArgs ev) =>
{
obj.GraphicObject.Tag = arg3.Text;
});
container.CreateAndAddTextBoxRow("N0", "Maximum Iterations", recycle.MaximumIterations,
(sender, e) =>
{
if (sender.Text.IsValidDouble())
{
recycle.MaximumIterations = int.Parse(sender.Text);
}
});
container.CreateAndAddLabelRow("Convergence Tolerances");
container.CreateAndAddTextBoxRow(nf, "Energy Flow", cv.ConvertFromSI(su.heatflow, recycle.ConvergenceParameters.Energy),
(sender, e) =>
{
if (sender.Text.IsValidDouble())
{
recycle.ConvergenceParameters.Energy = cv.ConvertToSI(su.heatflow, sender.Text.ToDoubleFromCurrent());
}
});
}
public static void Populate(ISimulationObject obj, DynamicLayout container)
{
var su = obj.GetFlowsheet().FlowsheetOptions.SelectedUnitSystem;
var nf = obj.GetFlowsheet().FlowsheetOptions.NumberFormat;
var recycle = (Recycle)obj;
s.CreateAndAddLabelRow(container, "Object Details");
s.CreateAndAddTwoLabelsRow(container, "Status", obj.GraphicObject.Active ? "Active" : "Inactive");
s.CreateAndAddStringEditorRow(container, "Name", obj.GraphicObject.Tag, (TextBox arg3, EventArgs ev) =>
{
obj.GraphicObject.Tag = arg3.Text;
});
container.CreateAndAddLabelRow("Convergence Control");
container.CreateAndAddCheckBoxRow("Converge using global solver",
recycle.AccelerationMethod == Interfaces.Enums.AccelMethod.GlobalBroyden,
(sender, e) => { if (sender.Checked.GetValueOrDefault())
{
recycle.AccelerationMethod = Interfaces.Enums.AccelMethod.GlobalBroyden;
}
else
{
recycle.AccelerationMethod = Interfaces.Enums.AccelMethod.None;
} });
container.CreateAndAddLabelRow("Convergence Tolerances");
container.CreateAndAddTextBoxRow(nf, "Mass Flow", cv.ConvertFromSI(su.massflow, recycle.ConvergenceParameters.VazaoMassica),
(sender, e) => {
if (sender.Text.IsValidDouble())
{
recycle.ConvergenceParameters.VazaoMassica = cv.ConvertToSI(su.massflow, sender.Text.ToDoubleFromCurrent());
}
});
container.CreateAndAddTextBoxRow(nf, "Temperature", cv.ConvertFromSI(su.deltaT, recycle.ConvergenceParameters.Temperatura),
(sender, e) =>
{
if (sender.Text.IsValidDouble())
{
recycle.ConvergenceParameters.Temperatura = cv.ConvertToSI(su.deltaT, sender.Text.ToDoubleFromCurrent());
}
});
container.CreateAndAddTextBoxRow(nf, "Pressure", cv.ConvertFromSI(su.deltaP, recycle.ConvergenceParameters.Pressao),
(sender, e) =>
{
if (sender.Text.IsValidDouble())
{
recycle.ConvergenceParameters.Pressao = cv.ConvertToSI(su.deltaP, sender.Text.ToDoubleFromCurrent());
}
});
}
void Initialize()
{
var su = SimObject.GetFlowsheet().FlowsheetOptions.SelectedUnitSystem;
var nf = SimObject.GetFlowsheet().FlowsheetOptions.NumberFormat;
var nff = SimObject.GetFlowsheet().FlowsheetOptions.FractionNumberFormat;
s.CreateAndAddLabelRow(container, "Dynamic Properties Editor");
s.CreateAndAddDescriptionRow(container, "Property values are updated/stored as they are changed/edited. There's no need to press ENTER to commit the changes.");
switch (SimObject.GraphicObject.ObjectType)
{
case ObjectType.MaterialStream:
container.CreateAndAddDropDownRow("Dynamic Specification",
SimObject.DynamicsSpec.GetEnumNames(), (int)SimObject.DynamicsSpec, (dd, e) => {
SimObject.DynamicsSpec = dd.SelectedIndex.ToEnum <Interfaces.Enums.Dynamics.DynamicsSpecType>();
SimObject.GetFlowsheet().UpdateInterface();
});
break;
}
var col1 = (IDictionary <string, object>)SimObject.ExtraProperties;
var col2 = (IDictionary <string, object>)SimObject.ExtraPropertiesDescriptions;
var col3 = (IDictionary <string, object>)SimObject.ExtraPropertiesUnitTypes;
foreach (var p in col1)
{
if (col2.ContainsKey(p.Key) && col3.ContainsKey(p.Key))
{
string unitsstring = "";
try
{
var utype = col3[p.Key];
Interfaces.Enums.UnitOfMeasure eval = (Interfaces.Enums.UnitOfMeasure)System.Enum.ToObject(typeof(Interfaces.Enums.UnitOfMeasure), utype);
unitsstring = su.GetCurrentUnits(eval);
}
catch { }
container.CreateAndAddTextBoxRow("G", unitsstring != "" ? p.Key + " (" + unitsstring + ")" : p.Key,
p.Value.ToString().ToDoubleFromCurrent(),
(tb, e) => {
try
{
col1[p.Key] = tb.Text.ToDoubleFromCurrent();
tb.TextColor = Colors.Blue;
}
catch
{
tb.TextColor = Colors.Red;
}
});
container.CreateAndAddDescriptionRow(col2[p.Key].ToString());
container.CreateAndAddEmptySpace();
}
}
s.CreateAndAddEmptySpace(container);
s.CreateAndAddEmptySpace(container);
}
void Initialize()
{
double dummy = 0.0f;
var su = flowsheet.FlowsheetOptions.SelectedUnitSystem;
var nf = flowsheet.FlowsheetOptions.NumberFormat;
if (section.TipoSegmento == "Tubulaosimples")
{
section.TipoSegmento = "Straight Tube Section";
}
var lblseg = container.CreateAndAddTwoLabelsRow("Segment", section.Indice.ToString());
var spinnerType = container.CreateAndAddDropDownRow("Type", sectypes, Array.IndexOf(sectypes.ToArray(), section.TipoSegmento), (sender, e) => section.TipoSegmento = sectypes[sender.SelectedIndex]);
var spinnerMat = container.CreateAndAddDropDownRow("Material", materials, Array.IndexOf(materials.ToArray(), section.Material), (sender, e) => section.Material = materials[sender.SelectedIndex]);
var txtIncrements = container.CreateAndAddTextBoxRow("N0", "Increments", section.Incrementos, (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.Incrementos = int.Parse(sender.Text.ToString());
}
});
var txtLength = container.CreateAndAddTextBoxRow(nf, "Length" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Comprimento), (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.Comprimento = cv.ConvertToSI(su.distance, double.Parse(sender.Text.ToString()));
}
});
var txtElevation = container.CreateAndAddTextBoxRow(nf, "Elevation" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Elevacao), (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.Elevacao = cv.ConvertToSI(su.distance, double.Parse(sender.Text.ToString()));
}
});
var txtED = container.CreateAndAddTextBoxRow(nf, "External Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DE), (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.DE = cv.Convert(su.diameter, "in", double.Parse(sender.Text.ToString()));
}
});
var txtID = container.CreateAndAddTextBoxRow(nf, "Internal Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DI), (sender, e) => { if (double.TryParse(sender.Text.ToString(), out dummy))
{
section.DI = cv.Convert(su.diameter, "in", double.Parse(sender.Text.ToString()));
}
});
}
void Initialize()
{
container.CreateAndAddLabelRow("Reaction ID");
container.CreateAndAddStringEditorRow2("Name", "", rx.Name, (sender, e) => { rx.Name = sender.Text; });
container.CreateAndAddLabelRow("Compounds and Stoichiometry (Include / Name / Stoich. Coeff. / Direct Order Exponent / Reverse Order Exponent)");
var compcontainer = new DynamicLayout();
compcontainer.BackgroundColor = Colors.White;
Double val;
foreach (ICompoundConstantProperties comp in flowsheet.SelectedCompounds.Values)
{
var chk = new CheckBox()
{
Text = comp.Name, Checked = (rx.Components.ContainsKey(comp.Name) ? true : false)
};
chk.CheckedChanged += (sender, e) =>
{
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, 0, 0));
}
else
{
rx.Components.Remove(comp.Name);
}
UpdateEquation();
};
var sc = new TextBox()
{
Width = (int)(sf * 30), Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].StoichCoeff.ToString() : 0.0f.ToString())
};
sc.TextChanged += (sender, e) =>
{
if (Double.TryParse(sc.Text.ToString(), out val))
{
sc.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, Double.Parse(sc.Text), false, 0, 0));
}
else
{
rx.Components[comp.Name].StoichCoeff = double.Parse(sc.Text);
}
UpdateEquation();
}
else
{
sc.TextColor = Colors.Red;
}
};
var txtdo = new TextBox()
{
Width = (int)(sf * 30), Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].DirectOrder.ToString() : 0.0f.ToString())
};
txtdo.TextChanged += (sender, e) =>
{
if (Double.TryParse(txtdo.Text.ToString(), out val))
{
txtdo.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, Double.Parse(txtdo.Text), 0));
}
else
{
rx.Components[comp.Name].DirectOrder = double.Parse(txtdo.Text);
}
UpdateEquation();
}
else
{
txtdo.TextColor = Colors.Red;
}
};
var txtro = new TextBox()
{
Width = (int)(sf * 30), Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].ReverseOrder.ToString() : 0.0f.ToString())
};
txtro.TextChanged += (sender, e) =>
{
if (Double.TryParse(txtro.Text.ToString(), out val))
{
txtro.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, 0, Double.Parse(txtro.Text)));
}
else
{
rx.Components[comp.Name].ReverseOrder = double.Parse(txtro.Text);
}
UpdateEquation();
}
else
{
txtro.TextColor = Colors.Red;
}
};
compcontainer.Add(new TableRow(chk, null, sc, txtdo, txtro));
}
container.CreateAndAddControlRow(compcontainer);
container.CreateAndAddEmptySpace();
var comps = flowsheet.SelectedCompounds.Values.Select((x) => x.Name).ToList();
comps.Insert(0, "");
container.CreateAndAddLabelRow("Base Compound");
var basecompselector = container.CreateAndAddDropDownRow("Base Compound", comps, 0, null);
var basecomp = rx.Components.Values.Where((x) => x.IsBaseReactant).FirstOrDefault();
if (basecomp != null)
{
basecompselector.SelectedIndex = comps.IndexOf(basecomp.CompName);
}
else
{
basecompselector.SelectedIndex = 0;
}
basecompselector.SelectedIndexChanged += (sender, e) =>
{
if (rx.Components.ContainsKey(comps[basecompselector.SelectedIndex]))
{
foreach (var rxc in rx.Components.Values)
{
rxc.IsBaseReactant = false;
}
rx.Components[comps[basecompselector.SelectedIndex]].IsBaseReactant = true;
rx.BaseReactant = comps[basecompselector.SelectedIndex];
}
};
container.CreateAndAddLabelRow("Reaction Balance");
txtEquation = container.CreateAndAddLabelRow2("");
container.CreateAndAddLabelRow("Reaction Phase");
var rxphaseselector = container.CreateAndAddDropDownRow("Reaction Phase", Shared.StringArrays.reactionphase().ToList(), 0, null);
switch (rx.ReactionPhase)
{
case Interfaces.Enums.PhaseName.Vapor:
rxphaseselector.SelectedIndex = (0);
break;
case Interfaces.Enums.PhaseName.Liquid:
rxphaseselector.SelectedIndex = (1);
break;
case Interfaces.Enums.PhaseName.Mixture:
rxphaseselector.SelectedIndex = (2);
break;
}
rxphaseselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxphaseselector.SelectedIndex)
{
case 0:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Vapor;
break;
case 1:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Liquid;
break;
case 2:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Mixture;
break;
}
};
container.CreateAndAddLabelRow("Reaction Basis");
var rxbasisselector = container.CreateAndAddDropDownRow("Reaction Basis", Shared.StringArrays.reactionbasis().ToList(), 0, null);
switch (rx.ReactionBasis)
{
case Interfaces.Enums.ReactionBasis.Activity:
rxphaseselector.SelectedIndex = (0);
break;
case Interfaces.Enums.ReactionBasis.Fugacity:
rxphaseselector.SelectedIndex = (1);
break;
case Interfaces.Enums.ReactionBasis.MassConc:
rxphaseselector.SelectedIndex = (2);
break;
case Interfaces.Enums.ReactionBasis.MassFrac:
rxphaseselector.SelectedIndex = (3);
break;
case Interfaces.Enums.ReactionBasis.MolarConc:
rxphaseselector.SelectedIndex = (4);
break;
case Interfaces.Enums.ReactionBasis.MolarFrac:
rxphaseselector.SelectedIndex = (5);
break;
case Interfaces.Enums.ReactionBasis.PartialPress:
rxphaseselector.SelectedIndex = (6);
break;
}
rxbasisselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxbasisselector.SelectedIndex)
{
case 0:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.Activity;
break;
case 1:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.Fugacity;
break;
case 2:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MassConc;
break;
case 3:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MassFrac;
break;
case 4:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MolarConc;
break;
case 5:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.MolarFrac;
break;
case 6:
rx.ReactionBasis = Interfaces.Enums.ReactionBasis.PartialPress;
break;
}
};
container.CreateAndAddLabelRow("Kinetic Parameters");
var nf = flowsheet.FlowsheetOptions.NumberFormat;
var su = flowsheet.FlowsheetOptions.SelectedUnitSystem;
container.CreateAndAddTextBoxRow(nf, "Minimum Temperature", rx.Tmin.ConvertFromSI(su.temperature), (sender, e) => { if (sender.Text.IsValidDouble())
{
rx.Tmin = sender.Text.ToDoubleFromCurrent().ConvertToSI(su.temperature);
}
});
container.CreateAndAddTextBoxRow(nf, "Maximum Temperature", rx.Tmax.ConvertFromSI(su.temperature), (sender, e) => { if (sender.Text.IsValidDouble())
{
rx.Tmax = sender.Text.ToDoubleFromCurrent().ConvertToSI(su.temperature);
}
});
container.CreateAndAddLabelRow2("Direct and Reverse Reactions Velocity Constants (k = A*exp(-E/RT), E in J/mol and T in K)");
container.CreateAndAddStringEditorRow2("Direct Reaction A", "", rx.A_Forward.ToString(), (sender, e) => {
if (Double.TryParse(sender.Text.ToString(), out val))
{
sender.TextColor = SystemColors.ControlText;
rx.A_Forward = double.Parse(sender.Text);
}
else
{
sender.TextColor = Colors.Red;
}
});
container.CreateAndAddStringEditorRow2("Direct Reaction E", "", rx.E_Forward.ToString(), (sender, e) =>
{
if (Double.TryParse(sender.Text.ToString(), out val))
{
sender.TextColor = SystemColors.ControlText;
rx.E_Forward = double.Parse(sender.Text);
}
else
{
sender.TextColor = Colors.Red;
}
});
container.CreateAndAddStringEditorRow2("Reverse Reaction A", "", rx.A_Reverse.ToString(), (sender, e) =>
{
if (Double.TryParse(sender.Text.ToString(), out val))
{
sender.TextColor = SystemColors.ControlText;
rx.A_Reverse = double.Parse(sender.Text);
}
else
{
sender.TextColor = Colors.Red;
}
});
container.CreateAndAddStringEditorRow2("Reverse Reaction E", "", rx.E_Reverse.ToString(), (sender, e) =>
{
if (Double.TryParse(sender.Text.ToString(), out val))
{
sender.TextColor = SystemColors.ControlText;
rx.E_Reverse = double.Parse(sender.Text);
}
else
{
sender.TextColor = Colors.Red;
}
});
container.CreateAndAddLabelRow("Units");
var us = new DWSIM.SharedClasses.SystemsOfUnits.Units();
var units = us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.molar_conc);
units.AddRange(us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.mass_conc));
units.AddRange(us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.pressure));
units.Insert(0, "");
container.CreateAndAddDropDownRow("Basis Units (Base Compound)", units, units.IndexOf(rx.ConcUnit), (sender, e) => rx.ConcUnit = sender.SelectedValue.ToString());
var units2 = us.GetUnitSet(Interfaces.Enums.UnitOfMeasure.reac_rate);
units2.Insert(0, "");
container.CreateAndAddDropDownRow("Velocity Units", units2, units2.IndexOf(rx.VelUnit), (sender, e) => rx.VelUnit = sender.SelectedValue.ToString());
UpdateEquation();
}
void Initialize()
{
var su = flowsheet.FlowsheetOptions.SelectedUnitSystem;
var nf = flowsheet.FlowsheetOptions.NumberFormat;
if (section.TipoSegmento == "Tubulaosimples")
{
section.TipoSegmento = "Straight Tube Section";
}
var lblseg = container.CreateAndAddTwoLabelsRow("Segment", section.Indice.ToString());
container.CreateAndAddDropDownRow("Type", sectypes, Array.IndexOf(sectypes.ToArray(), section.TipoSegmento), (sender, e) => section.TipoSegmento = sectypes[sender.SelectedIndex]);
var cbm = container.CreateAndAddDropDownRow("Material", materials, Array.IndexOf(materials.ToArray(), section.Material), (sender, e) => section.Material = materials[sender.SelectedIndex]);
var tbr = container.CreateAndAddTextBoxRow("G8", "Rugosity " + " (" + su.distance + ") *", cv.ConvertFromSI(su.distance, section.PipeWallRugosity), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.PipeWallRugosity = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
var tbtc = container.CreateAndAddStringEditorRow("Thermal Conductivity " + " (" + su.thermalConductivity + ") *", section.PipeWallThermalConductivityExpression, (sender, e) => { section.PipeWallThermalConductivityExpression = sender.Text.ToString(); });
container.CreateAndAddTextBoxRow("N0", "Increments", section.Incrementos, (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Incrementos = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow("N0", "Quantity", section.Quantidade, (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Quantidade = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow(nf, "Length" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Comprimento), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Comprimento = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddTextBoxRow(nf, "Elevation" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Elevacao), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Elevacao = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddTextBoxRow(nf, "External Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DE), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.DE = cv.Convert(su.diameter, "in", sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddTextBoxRow(nf, "Internal Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DI), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.DI = cv.Convert(su.diameter, "in", sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddDescriptionRow("* Fields required/used only for User-Defined materials");
tbr.ReadOnly = section.Material != flowsheet.GetTranslatedString("UserDefined");
tbtc.ReadOnly = tbr.ReadOnly;
if (tbr.ReadOnly)
{
tbr.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbtc.BackgroundColor = Eto.Drawing.Colors.LightGrey;
}
else
{
tbr.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbtc.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
}
cbm.SelectedValueChanged += (sender, e) =>
{
if (cbm.SelectedValue.ToString() == flowsheet.GetTranslatedString("UserDefined"))
{
tbr.ReadOnly = false;
tbtc.ReadOnly = false;
tbr.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbtc.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbr.Text = section.PipeWallRugosity.ConvertFromSI(su.distance).ToString(nf);
tbtc.Text = section.PipeWallThermalConductivityExpression;
tbtc.TextAlignment = TextAlignment.Left;
}
else
{
tbr.ReadOnly = true;
tbtc.ReadOnly = true;
tbr.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbtc.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbr.Text = pipe.rugosidade(cbm.SelectedValue.ToString(), section).ConvertFromSI(su.distance).ToString(nf);
if (pipe.GraphicObject.InputConnectors[0].IsAttached)
{
var stream = (MaterialStream)flowsheet.SimulationObjects[pipe.GraphicObject.InputConnectors[0].AttachedConnector.AttachedFrom.Name];
tbtc.Text = pipe.k_parede(cbm.SelectedValue.ToString(), stream.GetTemperature(), section).ConvertFromSI(su.thermalConductivity).ToString(nf);
}
else
{
tbtc.Text = pipe.k_parede(cbm.SelectedValue.ToString(), 298.15, section).ConvertFromSI(su.thermalConductivity).ToString(nf);
}
tbtc.TextAlignment = TextAlignment.Right;
}
};
}
void Initialize()
{
container.CreateAndAddLabelRow("Reaction ID");
container.CreateAndAddStringEditorRow2("Name", "", rx.Name, (sender, e) => { rx.Name = sender.Text; });
container.CreateAndAddLabelRow("Compounds and Stoichiometry (Include / Name / Heat of Formation (kJ/kg) / Stoich. Coeff.)");
var compcontainer = new DynamicLayout();
//compcontainer.BackgroundColor = Colors.White;
Double val;
foreach (ICompoundConstantProperties comp in flowsheet.SelectedCompounds.Values)
{
var chk = new CheckBox()
{
Text = comp.Name, Checked = (rx.Components.ContainsKey(comp.Name) ? true : false)
};
chk.CheckedChanged += (sender, e) =>
{
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, 0, false, 0, 0));
}
else
{
rx.Components.Remove(comp.Name);
}
UpdateEquation();
};
var sc = new TextBox()
{
Width = (int)(sf * 50), Text = (rx.Components.ContainsKey(comp.Name) ? rx.Components[comp.Name].StoichCoeff.ToString() : 0.0f.ToString())
};
sc.TextChanged += (sender, e) =>
{
if (Double.TryParse(sc.Text.ToString(), out val))
{
sc.TextColor = SystemColors.ControlText;
if (!rx.Components.ContainsKey(comp.Name))
{
rx.Components.Add(comp.Name, new DWSIM.Thermodynamics.BaseClasses.ReactionStoichBase(comp.Name, Double.Parse(sc.Text), false, 0, 0));
}
else
{
rx.Components[comp.Name].StoichCoeff = double.Parse(sc.Text);
}
UpdateEquation();
}
else
{
sc.TextColor = Colors.Red;
}
};
var hf = new TextBox()
{
Enabled = false, Width = (int)(sf * 100), Text = comp.IG_Enthalpy_of_Formation_25C.ToString("N2")
};
compcontainer.Add(new TableRow(chk, null, hf, sc));
}
container.CreateAndAddControlRow(compcontainer);
container.CreateAndAddEmptySpace();
var comps = flowsheet.SelectedCompounds.Values.Select((x) => x.Name).ToList();
comps.Insert(0, "");
container.CreateAndAddLabelRow("Base Compound");
var basecompselector = container.CreateAndAddDropDownRow("Base Compound", comps, 0, null);
var basecomp = rx.Components.Values.Where((x) => x.IsBaseReactant).FirstOrDefault();
if (basecomp != null)
{
basecompselector.SelectedIndex = comps.IndexOf(basecomp.CompName);
}
else
{
basecompselector.SelectedIndex = 0;
}
basecompselector.SelectedIndexChanged += (sender, e) =>
{
if (rx.Components.ContainsKey(comps[basecompselector.SelectedIndex]))
{
foreach (var rxc in rx.Components.Values)
{
rxc.IsBaseReactant = false;
}
rx.Components[comps[basecompselector.SelectedIndex]].IsBaseReactant = true;
rx.BaseReactant = comps[basecompselector.SelectedIndex];
}
};
container.CreateAndAddLabelRow("Reaction Balance");
txtEquation = container.CreateAndAddLabelRow2("");
container.CreateAndAddLabelRow("Temperature Limits");
var nf = flowsheet.FlowsheetOptions.NumberFormat;
var su = flowsheet.FlowsheetOptions.SelectedUnitSystem;
container.CreateAndAddTextBoxRow(nf, "Minimum Temperature (" + su.temperature + ")", rx.Tmin.ConvertFromSI(su.temperature), (sender, e) => { if (sender.Text.IsValidDouble())
{
rx.Tmin = sender.Text.ToDoubleFromCurrent().ConvertToSI(su.temperature);
}
});
container.CreateAndAddTextBoxRow(nf, "Maximum Temperature (" + su.temperature + ")", rx.Tmax.ConvertFromSI(su.temperature), (sender, e) => { if (sender.Text.IsValidDouble())
{
rx.Tmax = sender.Text.ToDoubleFromCurrent().ConvertToSI(su.temperature);
}
});
container.CreateAndAddLabelRow("Reaction Phase");
var rxphaseselector = container.CreateAndAddDropDownRow("Reaction Phase", Shared.StringArrays.reactionphase().ToList(), 0, null);
switch (rx.ReactionPhase)
{
case Interfaces.Enums.PhaseName.Mixture:
rxphaseselector.SelectedIndex = (0);
break;
case Interfaces.Enums.PhaseName.Vapor:
rxphaseselector.SelectedIndex = (1);
break;
case Interfaces.Enums.PhaseName.Liquid:
rxphaseselector.SelectedIndex = (2);
break;
}
rxphaseselector.SelectedIndexChanged += (sender, e) =>
{
switch (rxphaseselector.SelectedIndex)
{
case 0:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Mixture;
break;
case 1:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Vapor;
break;
case 2:
rx.ReactionPhase = Interfaces.Enums.PhaseName.Liquid;
break;
}
};
UpdateEquation();
}
void Initialize()
{
var su = flowsheet.FlowsheetOptions.SelectedUnitSystem;
var nf = flowsheet.FlowsheetOptions.NumberFormat;
if (section.TipoSegmento == "Tubulaosimples")
{
section.TipoSegmento = "Straight Tube Section";
}
var lblseg = container.CreateAndAddTwoLabelsRow("Segment", section.Indice.ToString());
container.CreateAndAddDropDownRow("Type", sectypes, Array.IndexOf(sectypes.ToArray(), section.TipoSegmento), (sender, e) => section.TipoSegmento = sectypes[sender.SelectedIndex]);
var cbm = container.CreateAndAddDropDownRow("Material", materials, Array.IndexOf(materials.ToArray(), section.Material), (sender, e) => section.Material = materials[sender.SelectedIndex]);
var tbr = container.CreateAndAddTextBoxRow("G8", "Rugosity " + " (" + su.distance + ") *", cv.ConvertFromSI(su.distance, section.PipeWallRugosity), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.PipeWallRugosity = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
var tbtc = container.CreateAndAddStringEditorRow("Thermal Conductivity " + " (" + su.thermalConductivity + ") *", section.PipeWallThermalConductivityExpression, (sender, e) => { section.PipeWallThermalConductivityExpression = sender.Text.ToString(); });
container.CreateAndAddDescriptionRow("* Fields required/used only for User-Defined materials");
container.CreateAndAddTextBoxRow("N0", "Increments", section.Incrementos, (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Incrementos = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow("N0", "Quantity", section.Quantidade, (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Quantidade = int.Parse(sender.Text.ToString());
}
});
container.CreateAndAddTextBoxRow(nf, "Length" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Comprimento), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Comprimento = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
container.CreateAndAddTextBoxRow(nf, "Elevation" + " (" + su.distance + ")", cv.ConvertFromSI(su.distance, section.Elevacao), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.Elevacao = cv.ConvertToSI(su.distance, sender.Text.ParseExpressionToDouble());
}
});
var edtb = container.CreateAndAddTextBoxRow(nf, "External Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DE), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.DE = cv.Convert(su.diameter, "in", sender.Text.ParseExpressionToDouble());
}
});
var idtb = container.CreateAndAddTextBoxRow(nf, "Internal Diameter" + " (" + su.diameter + ")", cv.Convert("in", su.diameter, section.DI), (sender, e) => { if (sender.Text.IsValidDoubleExpression())
{
section.DI = cv.Convert(su.diameter, "in", sender.Text.ParseExpressionToDouble());
}
});
var ssizes = Pipe.GetStandardPipeSizes();
var cmenussizes = new ContextMenu();
foreach (var key in ssizes.Keys)
{
var mi = new ButtonMenuItem {
Text = key
};
foreach (var item in ssizes[key])
{
var mi2 = new ButtonMenuItem
{
Text = item.StandardSizeDescription + " (OD = " +
item.ExternalDiameter_Inches + " in., ID = " +
item.InternalDiameter_Inches + " in.)"
};
mi2.Click += (s, e) =>
{
flowsheet.RunCodeOnUIThread(() =>
{
edtb.Text = item.ExternalDiameter_Inches.ConvertUnits("in", su.diameter).ToString(nf);
idtb.Text = item.InternalDiameter_Inches.ConvertUnits("in", su.diameter).ToString(nf);
});
};
mi.Items.Add(mi2);
}
cmenussizes.Items.Add(mi);
}
container.CreateAndAddButtonRow("Standard Pipe Sizes...", null, (btn, ev) =>
{
cmenussizes.Show(btn);
});
tbr.ReadOnly = section.Material != flowsheet.GetTranslatedString("UserDefined");
tbtc.ReadOnly = tbr.ReadOnly;
if (tbr.ReadOnly)
{
tbr.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbtc.BackgroundColor = Eto.Drawing.Colors.LightGrey;
}
else
{
tbr.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbtc.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
}
cbm.SelectedValueChanged += (sender, e) =>
{
if (cbm.SelectedValue.ToString() == flowsheet.GetTranslatedString("UserDefined"))
{
tbr.ReadOnly = false;
tbtc.ReadOnly = false;
tbr.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbtc.BackgroundColor = Eto.Drawing.SystemColors.ControlBackground;
tbr.Text = section.PipeWallRugosity.ConvertFromSI(su.distance).ToString(nf);
tbtc.Text = section.PipeWallThermalConductivityExpression;
tbtc.TextAlignment = TextAlignment.Left;
}
else
{
tbr.ReadOnly = true;
tbtc.ReadOnly = true;
tbr.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbtc.BackgroundColor = Eto.Drawing.Colors.LightGrey;
tbr.Text = pipe.GetRugosity(cbm.SelectedValue.ToString(), section).ConvertFromSI(su.distance).ToString(nf);
if (pipe.GraphicObject != null && pipe.GraphicObject.InputConnectors[0].IsAttached)
{
var stream = (MaterialStream)flowsheet.SimulationObjects[pipe.GraphicObject.InputConnectors[0].AttachedConnector.AttachedFrom.Name];
tbtc.Text = pipe.k_parede(cbm.SelectedValue.ToString(), stream.GetTemperature(), section).ConvertFromSI(su.thermalConductivity).ToString(nf);
}
else
{
tbtc.Text = pipe.k_parede(cbm.SelectedValue.ToString(), 298.15, section).ConvertFromSI(su.thermalConductivity).ToString(nf);
}
tbtc.TextAlignment = TextAlignment.Right;
}
};
}