private void button1_Click(object sender, EventArgs e)
{
DrawingHandler MyDrawingHandler = new DrawingHandler();
PrintAttributes printAttributes = new PrintAttributes();
printAttributes.Scale = 1.0;
printAttributes.PrintToMultipleSheet = false;
printAttributes.NumberOfCopies = 1;
printAttributes.Orientation = DotPrintOrientationType.Auto;
printAttributes.PrintArea = DotPrintAreaType.EntireDrawing;
printAttributes.PrinterInstance = "PDF_594x420";
if (MyDrawingHandler.GetConnectionStatus())
{
DrawingEnumerator SelectedDrawings = MyDrawingHandler.GetDrawingSelector().GetSelected();
while (SelectedDrawings.MoveNext())
{
Drawing currentDrawing = SelectedDrawings.Current;
//Get print attributes: we need only PrinterInstance
MyDrawingHandler.PrintDrawing(currentDrawing, printAttributes);
}
}
}
private void btnShow_Click(object sender, EventArgs e)
{
lblMessage.Text = "";
DrawingHandler MyDrawingHandler = new DrawingHandler();
int nDrawings = 0;
if (MyDrawingHandler.GetConnectionStatus())
{
DrawingEnumerator SelectedDrawings = MyDrawingHandler.GetDrawingSelector().GetSelected();
int iCounter = 0;
while (SelectedDrawings.MoveNext())
{
iCounter++;
}
nDrawings = iCounter;
}
progressBar1.Minimum = 0;
progressBar1.Maximum = nDrawings;
progressBar1.Step = 1;
if (MyDrawingHandler.GetConnectionStatus())
{
DrawingEnumerator SelectedDrawings = MyDrawingHandler.GetDrawingSelector().GetSelected();
int iCounter = 1;
while (SelectedDrawings.MoveNext())
{
progressBar1.PerformStep();
Drawing currentDrawing = SelectedDrawings.Current;
ListViewItem currentRow = new ListViewItem(currentDrawing.Mark);
currentRow.SubItems.Add(currentDrawing.Name);
string strHeight = currentDrawing.Layout.SheetSize.Height.ToString();
string strWidth = currentDrawing.Layout.SheetSize.Width.ToString();
currentRow.SubItems.Add(strWidth + "x" + strHeight);
string PrinterInstance = "QP_" + strWidth + "x" + strHeight;
//TSM.Operations.Operation.DisplayPrompt("Drawing " + currentDrawing.Name + ": " + iCounter.ToString() + "/" + nDrawings.ToString());
lblMessage.Text = "";
lblMessage.Text = "Drawing " + currentDrawing.Name + ": " + iCounter.ToString() + "/" + nDrawings.ToString();
iCounter++;
if (chkPDF.Checked)
{
WriteCurrentDrawing(currentDrawing, PrinterInstance);
}
if (chkDWG.Checked)
{
PrintToFile(currentDrawing);
}
}
}
//TSM.Operations.Operation.DisplayPrompt("Write command completed!");
lblMessage.Text = "Write command completed!";
progressBar1.Value = 0;
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
Model model = new Model();
ModelInfo modelInfo = model.GetInfo();
string drawingsFolderPath = modelInfo.ModelPath + @"\drawings\";
DrawingHandler drawingHandler = new DrawingHandler();
DrawingEnumerator drawingEnum = drawingHandler.GetDrawingSelector().GetSelected();
if (drawingEnum.GetSize() == 1)
{
while (drawingEnum.MoveNext())
{
System.Reflection.PropertyInfo propertyInfo = drawingEnum.Current.GetType().GetProperty("Identifier", System.Reflection.BindingFlags.Instance | System.Reflection.BindingFlags.NonPublic);
object value = propertyInfo.GetValue(drawingEnum.Current, null);
Identifier Identifier = (Identifier)value;
Beam tempBeam = new Beam();
tempBeam.Identifier = Identifier;
string drawingFile = "";
bool result = tempBeam.GetReportProperty("DRAWING_PLOT_FILE", ref drawingFile);
System.IO.FileInfo file = new System.IO.FileInfo(drawingsFolderPath + drawingFile);
if (file.Exists)
{
System.Diagnostics.Process.Start("Explorer.exe", @"/select, " + file.FullName);
}
}
}
}
public void ReturnFullNameToTextFile()
{
string path = Environment.GetFolderPath(Environment.SpecialFolder.Desktop);
string document = "drawings.csv";
DrawingHandler drawingHandler = new DrawingHandler();
DrawingEnumerator selectedDrawings = drawingHandler.GetDrawingSelector().GetSelected();
string result = string.Empty;
string title1 = string.Empty;
string title2 = string.Empty;
string number = string.Empty;
string projectNumber = string.Empty;
string drType = string.Empty;
while (selectedDrawings.MoveNext())
{
var currentDrawingInfo = new DrawingInfo();
Drawing drawing = selectedDrawings.Current;
currentDrawingInfo.BaseName = drawing.GetType() + drawing.Mark;
currentDrawingInfo.DrawingName = drawing.Name;
drawing.GetUserProperty("PM_DRAWING_TITLE_1", ref title1);
drawing.GetUserProperty("PM_DRAWING_TITLE_2", ref title2);
drawing.GetUserProperty("PM_DRAWING_TYPE", ref drType);
drawing.GetUserProperty("Nr_dokumentu", ref number);
drawing.GetUserProperty("Nr_projektu", ref projectNumber);
currentDrawingInfo.DrawingTitle1 = title1;
currentDrawingInfo.DrawingTitle2 = title2;
currentDrawingInfo.DrawingType = drType;
currentDrawingInfo.DrawingTitle2Expanded = this.ReturnFullTitle(title2);
currentDrawingInfo.DrawingProjectNumber = projectNumber;
currentDrawingInfo.DrawingNumber = number;
result += currentDrawingInfo.ToString() + "\n";
}
var lines = result.Split('\n');
using (StreamWriter outputFile = new StreamWriter(path + @"\" + document))
{
foreach (string line in lines)
{
outputFile.WriteLine(line);
}
}
MessageBox.Show("All done!");
}
/// <summary>Add items from the enumerator to the System.Collections.Generic.List</summary>
public static List <Drawing> ToList(this DrawingEnumerator enumerator)
{
var output = new List <Drawing>(enumerator.GetSize());
while (enumerator.MoveNext())
{
output.Add(enumerator.Current);
}
return(output);
}
/// <summary>Add items from the enumerator to the System.Collections.Generic.List. if (enumerator.Current is T t) output.Add(t);</summary>
public static List <T> ToList <T>(this DrawingEnumerator enumerator) where T : Drawing
{
var output = new List <T>(enumerator.GetSize());
while (enumerator.MoveNext())
{
if (enumerator.Current is T t)
{
output.Add(t);
}
}
return(output);
}
private ArrayList getSelectedCastUnitDrawing(DrawingEnumerator selectedDrawings)
{
ArrayList selectedCastUnitDrawings = new ArrayList();
while (selectedDrawings.MoveNext())
{
if (selectedDrawings.Current is CastUnitDrawing)
{
selectedCastUnitDrawings.Add(selectedDrawings.Current);
}
}
return selectedCastUnitDrawings;
}
private ArrayList getSelectedCastUnitDrawing(DrawingEnumerator selectedDrawings)
{
ArrayList selectedCastUnitDrawings = new ArrayList();
while (selectedDrawings.MoveNext())
{
if (selectedDrawings.Current is CastUnitDrawing)
{
selectedCastUnitDrawings.Add(selectedDrawings.Current);
}
}
return(selectedCastUnitDrawings);
}
private void PickExtraSheets_Click(object sender, EventArgs e)
{
ExtraSheets.Clear();
ExtraSheetsList.Items.Clear();
bool error = false;
Model model = new Model();
ModelInfo modelInfo = model.GetInfo();
string drawingFolderPath = modelInfo.ModelPath + @"\drawings\";
DrawingHandler drawingHandler = new DrawingHandler();
DrawingEnumerator drawingEnum = drawingHandler.GetDrawingSelector().GetSelected();
if (drawingEnum.GetSize() > 0)
{
while (drawingEnum.MoveNext())
{
if (drawingEnum.Current is AssemblyDrawing)
{
PropertyInfo pi = drawingEnum.Current.GetType().GetProperty("Identifier", BindingFlags.Instance | BindingFlags.NonPublic);
object value = pi.GetValue(drawingEnum.Current, null);
Identifier Identifier = (Identifier)value;
Beam temporary = new Beam();
temporary.Identifier = Identifier;
string dgFileName = "";
bool dg = temporary.GetReportProperty("DRAWING_PLOT_FILE", ref dgFileName);
FileInfo dgFile = new FileInfo(drawingFolderPath + dgFileName);
if (dgFile.Exists)
{
ExtraSheets.Add(dgFile.FullName);
ExtraSheetsList.Items.Add(drawingEnum.Current.Mark);
}
}
else
{
error = true;
}
}
CopyViews.Enabled = true;
if (error == true)
{
MessageBox.Show("Pick Assembly Drawings Only");
ExtraSheets.Clear();
ExtraSheetsList.Items.Clear();
CopyViews.Enabled = false;
}
}
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
Model model = new Model();
DrawingHandler drawingHandler = new DrawingHandler();
DrawingEnumerator drawingEnum = drawingHandler.GetDrawingSelector().GetSelected();
if (drawingHandler.GetActiveDrawing() == null)
{
while (drawingEnum.MoveNext())
{
if (drawingEnum.Current is AssemblyDrawing)
{
AssemblyDrawing assemblyDrawing = drawingEnum.Current as AssemblyDrawing;
drawingHandler.SetActiveDrawing(assemblyDrawing, false);
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetActiveDrawing().GetSheet().GetAllObjects();
while (drawingObjectEnum.MoveNext())
{
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.Part)
{
Tekla.Structures.Drawing.Part part = drawingObjectEnum.Current as Tekla.Structures.Drawing.Part;
ArrayList array = new ArrayList();
array.Add(model.SelectModelObject(new Tekla.Structures.Identifier(part.ModelIdentifier.ID)));
Tekla.Structures.Model.UI.ModelObjectSelector modelObjectSelector = new Tekla.Structures.Model.UI.ModelObjectSelector();
modelObjectSelector.Select(array);
ModelObjectEnumerator modelObjectEnum = model.GetModelObjectSelector().GetSelectedObjects();
while (modelObjectEnum.MoveNext())
{
if (modelObjectEnum.Current is Tekla.Structures.Model.Part)
{
Tekla.Structures.Model.Part mpart = modelObjectEnum.Current as Tekla.Structures.Model.Part;
Tekla.Structures.Model.Assembly assembly = mpart.GetAssembly();
Tekla.Structures.Model.Part mainPart = (Tekla.Structures.Model.Part)assembly.GetMainPart();
assemblyDrawing.Name = mainPart.Name;
assemblyDrawing.Modify();
assemblyDrawing.CommitChanges();
}
}
modelObjectSelector.Select(new ArrayList());
}
}
drawingHandler.CloseActiveDrawing();
}
}
}
}
private void PickMainDrawing_Click(object sender, EventArgs e)
{
Model model = new Model();
ModelInfo modelInfo = model.GetInfo();
string drawingFolderPath = modelInfo.ModelPath + @"\drawings\";
DrawingHandler drawingHandler = new DrawingHandler();
DrawingEnumerator drawingEnum = drawingHandler.GetDrawingSelector().GetSelected();
if (drawingEnum.GetSize() == 1)
{
while (drawingEnum.MoveNext())
{
if (drawingEnum.Current is AssemblyDrawing)
{
PropertyInfo pi = drawingEnum.Current.GetType().GetProperty("Identifier", BindingFlags.Instance | BindingFlags.NonPublic);
object value = pi.GetValue(drawingEnum.Current, null);
Identifier Identifier = (Identifier)value;
Beam temporary = new Beam();
temporary.Identifier = Identifier;
string dgFileName = "";
bool dg = temporary.GetReportProperty("DRAWING_PLOT_FILE", ref dgFileName);
FileInfo dgFile = new FileInfo(drawingFolderPath + dgFileName);
if (dgFile.Exists)
{
MainDrawing = dgFile.FullName;
MainDrawingNumber.Text = drawingEnum.Current.Mark;
}
}
else
{
MessageBox.Show("Pick ONE Assembly Drawing");
}
}
CreateExtraSheets.Enabled = true;
}
else
{
MessageBox.Show("Pick ONE Assembly Drawing");
}
}
public string GetMultiInfo()
{
string result = string.Empty;
DrawingHandler drawingHandler = new DrawingHandler();
DrawingEnumerator selectedDrawings = drawingHandler.GetDrawingSelector().GetSelected();
List <DrawingInfo> listOfDrawings = new List <DrawingInfo>();
string number = string.Empty;
string projectNumber = string.Empty;
string title1 = string.Empty;
string title2 = string.Empty;
string name = string.Empty;
while (selectedDrawings.MoveNext())
{
var currentDrawingInfo = new DrawingInfo();
Drawing drawing = selectedDrawings.Current;
currentDrawingInfo.BaseName = drawing.GetType() + drawing.Mark;
currentDrawingInfo.DrawingName = drawing.Name;
drawing.GetUserProperty("PM_DRAWING_TITLE_1", ref title1);
drawing.GetUserProperty("PM_DRAWING_TITLE_2", ref title2);
drawing.GetUserProperty("Nr_dokumentu", ref number);
drawing.GetUserProperty("Nr_projektu", ref projectNumber);
currentDrawingInfo.DrawingTitle1 = title1;
currentDrawingInfo.DrawingTitle2 = title2;
currentDrawingInfo.DrawingTitle2Expanded = this.ReturnFullTitle(title2);
currentDrawingInfo.DrawingProjectNumber = projectNumber;
currentDrawingInfo.DrawingNumber = number;
name = currentDrawingInfo.ToString();
}
return(name);
}
/// <summary>
/// When application starts, this gets the drawings from Tekla Structures and adds them to the list
/// </summary>
private void AddDrawingsToListView()
{
if (MyDrawingHandler.GetConnectionStatus())
{
int Index = 0;
DrawingEnumerator MyDrawingEnumerator = MyDrawingHandler.GetDrawings();
while (MyDrawingEnumerator.MoveNext())
{
Drawing CurrentDrawing = MyDrawingEnumerator.Current;
ListViewItem Item = new ListViewItem();
Item.Tag = CurrentDrawing;
Item.Text = Index + " " + GetDrawingTypeCharacter(CurrentDrawing) + " - " + CurrentDrawing.Mark;
listView1.Items.Add(Item);
Index++;
}
}
}
public string ReturnFullName()
{
string result = string.Empty;
DrawingHandler drawingHandler = new DrawingHandler();
DrawingEnumerator selectedDrawings = drawingHandler.GetDrawingSelector().GetSelected();
string title2 = string.Empty;
while (selectedDrawings.MoveNext())
{
Drawing drawing = selectedDrawings.Current;
drawing.GetUserProperty("PM_DRAWING_TITLE_2", ref title2);
}
title2 = title2.Remove(0, 4);
result = this.ExpandTitle(title2);
return(result);
}
private void CreateExtraSheets_Click(object sender, EventArgs e)
{
akit.Callback("acmd_display_attr_dialog", "adraw_dial", "main_frame"); // open drawing settings dialog
akit.ValueChange("adraw_dial", "gr_adraw_get_menu", "KWP-blank"); // select blank attributes
akit.PushButton("gr_adraw_get", "adraw_dial"); // load attributes
Model model = new Model();
Tekla.Structures.Model.UI.ModelObjectSelector mObjSelector = new Tekla.Structures.Model.UI.ModelObjectSelector();
DrawingHandler drawingHandler = new DrawingHandler();
DrawingEnumerator drawingEnum = drawingHandler.GetDrawingSelector().GetSelected();
if (drawingEnum.GetSize() > 0)
{
while (drawingEnum.MoveNext())
{
if (drawingEnum.Current is AssemblyDrawing)
{
AssemblyDrawing assemblyDrawing = drawingEnum.Current as AssemblyDrawing;
akit.ValueChange("adraw_dial", "gr_adraw_description", assemblyDrawing.Name); // change name
akit.PushButton("dia_draw_select_parts", "Drawing_selection"); // select parts in drawing
int count = 0;
bool result = int.TryParse(RequiredSheets.Text, out count);
for (int i = 2; i <= count; i++)
{
akit.ValueChange("adraw_dial", "txtFldSheetNumber", i.ToString()); // change sheet number
akit.PushButton("gr_adraw_apply", "adraw_dial"); // apply settings
akit.Callback("acmd_create_dim_assembly_drawings", "", "main_frame"); // create assembly drawing for selected part
}
mObjSelector.Select(new ArrayList());
}
}
}
PickExtraSheets.Enabled = true;
}
public void WriteNumber(string file)
{
DrawingHandler drawingHandler = new DrawingHandler();
DrawingEnumerator selectedDrawings = drawingHandler.GetDrawingSelector().GetSelected();
FileInfo toRead = new FileInfo();
Dictionary <string, string> dictionary = new Dictionary <string, string>();
dictionary = toRead.ConvertFileToDictionary(file);
while (selectedDrawings.MoveNext())
{
Drawing drawing = selectedDrawings.Current;
string searchedNumber = drawing.GetType() + drawing.Mark;
string result = toRead.ReturnNumberFromDictionary(searchedNumber, dictionary);
drawing.SetUserProperty("Nr_dokumentu", result);
drawing.CommitChanges();
}
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
DrawingHandler DrawingHandler = new DrawingHandler();
DrawingEnumerator DrawingEnum = DrawingHandler.GetDrawingSelector().GetSelected();
if (DrawingEnum.GetSize() == 0)
{
// No drawings selected
MessageBox.Show("No Drawings Selected");
return;
}
while (DrawingEnum.MoveNext())
{
Drawing Drawing = DrawingEnum.Current;
DrawingHandler.SetActiveDrawing(Drawing, false);
DrawingObjectEnumerator DrawingObjEnum = Drawing.GetSheet().GetAllObjects();
ArrayList MarkArray = new ArrayList();
ArrayList PartArray = new ArrayList();
while (DrawingObjEnum.MoveNext())
{
if (DrawingObjEnum.Current is MarkBase)
{
MarkArray.Add(DrawingObjEnum.Current);
}
if (DrawingObjEnum.Current is Tekla.Structures.Drawing.Part || DrawingObjEnum.Current is Tekla.Structures.Drawing.Bolt)
{
PartArray.Add(DrawingObjEnum.Current);
}
}
DrawingHandler.GetDrawingObjectSelector().SelectObjects(MarkArray, true);
// part mark properties
akit.Callback("acmd_display_selected_drawing_object_dialog", "", "main_frame");
akit.TabChange("pmark_dial", "Container_2", "gr_mark_general_tab");
akit.PushButton("gr_pmark_place", "pmark_dial");
akit.ValueChange("pmpl_dial", "text_placing_mode", "1");
akit.PushButton("txpl_modify", "pmpl_dial");
akit.PushButton("txpl_cancel", "pmpl_dial");
akit.PushButton("pmark_cancel", "pmark_dial");
// bolt mark properties
akit.Callback("acmd_display_attr_dialog", "smark_dial", "main_frame");
akit.TabChange("smark_dial", "Container_217", "gr_mark_general_tab");
akit.PushButton("gr_smark_place", "smark_dial");
akit.ValueChange("smpl_dial", "text_placing_mode", "1");
akit.PushButton("txpl_modify", "smpl_dial");
akit.PushButton("txpl_cancel", "smpl_dial");
akit.PushButton("smark_cancel", "smark_dial");
// connection mark properties
akit.Callback("acmd_display_attr_dialog", "jmark_dial", "main_frame");
akit.TabChange("jmark_dial", "Container_217", "gr_mark_general_tab");
akit.PushButton("gr_jmark_place", "jmark_dial");
akit.ValueChange("jmpl_dial", "text_placing_mode", "1");
akit.PushButton("txpl_modify", "jmpl_dial");
akit.PushButton("txpl_cancel", "jmpl_dial");
akit.PushButton("jmark_cancel", "jmark_dial");
DrawingHandler.GetDrawingObjectSelector().UnselectAllObjects();
DrawingHandler.GetDrawingObjectSelector().SelectObjects(PartArray, true);
akit.Callback("acmd_update_marks_selected", "", "main_frame");
DrawingHandler.SaveActiveDrawing();
DrawingHandler.CloseActiveDrawing();
}
}
private void RenameDrawingTitle(DrawingEnumerator DrawingList)
{
this.progressBar1.Maximum = DrawingList.GetSize();
int num = 1;
int num2 = 0;
int num3 = 0;
int num4 = 0;
bool needsUpdating = false;
while (DrawingList.MoveNext())
{
this.progressBar1.Value++;
this.CurrentNo.Text = num++.ToString() + '/' + DrawingList.GetSize().ToString();
this.CurrentNo.Refresh();
string mainpartname = "";
string existingDrawingname = ""; // Name of the drawing before modify
Tekla.Structures.Model.ModelObject modelObject = null;
Drawing currentDrawing = DrawingList.Current;
if (currentDrawing.UpToDateStatus.ToString() != "DrawingIsUpToDate")
{
needsUpdating = true;
continue;
}
if (DrawingList.Current is AssemblyDrawing)
{
AssemblyDrawing assemblyDrawing = DrawingList.Current as AssemblyDrawing;
Identifier assemblyIdentifier = assemblyDrawing.AssemblyIdentifier;
modelObject = this.My_model.SelectModelObject(assemblyIdentifier);
modelObject.GetReportProperty("ASSEMBLY_NAME", ref mainpartname);
num2++;
}
if (DrawingList.Current is SinglePartDrawing)
{
SinglePartDrawing singlePartDrawing = DrawingList.Current as SinglePartDrawing;
Identifier partIdentifier = singlePartDrawing.PartIdentifier;
modelObject = this.My_model.SelectModelObject(partIdentifier);
modelObject.GetReportProperty("NAME", ref mainpartname);
}
if (modelObject != null)
{
// Check if drawing name already contains the automatic drawing name:
existingDrawingname = DrawingList.Current.Name;
bool drawingNameMatch = existingDrawingname.Contains(mainpartname);
if ((drawingNameMatch == true) || (drawingNameMatch = existingDrawingname.Contains("DS")))
{
num4++;
}
if (drawingNameMatch == false)
{
DrawingList.Current.Name = mainpartname;
DrawingList.Current.Modify();
num3++;
}
}
}
if (needsUpdating == true)
{
MessageBox.Show("Some of the drawings are not up to date!\n\nNames were not updated for that drawings.", Variables.title);
}
MessageBox.Show(string.Concat(new object[]
{
num3,
" Drawing's name changed \n",
num4,
" Drawings kept the existing name"
}), Variables.title);
}
public void GetData(Shared.Models.User user)
{
try
{
DrawingEnumerator SelectedDrawings = CourretDrawingHandler.GetDrawingSelector().GetSelected();
logger.Info("Чертежи успешно получены");
Drawings = new List <Shared.Models.Drawing>();
Errors = new List <StringErrorBindingModel>();
while (SelectedDrawings.MoveNext())
{
try
{
if (SelectedDrawings.Current is AssemblyDrawing)
{
String Number = "";
Assembly assembly = model.SelectModelObject(((SelectedDrawings.Current as AssemblyDrawing)).AssemblyIdentifier) as Assembly;
if (!ChechedDate(assembly))
{
assembly.GetReportProperty("CUSTOM.Zakaz", ref Number);
Errors.Add(new StringErrorBindingModel {
Data = $"Заказ: {Number}, Марка: {SelectedDrawings.Current.Mark}", Error = "Не заполнено поле \"Дата\""
});
continue;
}
GetDrawing(assembly, SelectedDrawings.Current as AssemblyDrawing);
}
}
catch (Exception E)
{
String Number = "";
String List = "";
Assembly assembly = model.SelectModelObject(((SelectedDrawings.Current as AssemblyDrawing)).AssemblyIdentifier) as Assembly;
assembly.GetReportProperty("CUSTOM.Zakaz", ref Number);
assembly.GetReportProperty("CUSTOM.Drw_SheetRev", ref List);
logger.Error(E.ToString());
Errors.Add(new StringErrorBindingModel {
Data = $"Заказ: {Number}, Лист: {List}", Error = E.Message
});
}
}
logger.Info("Чертежи добавлены");
ModelInfo modelInfo = model.GetInfo();
Model = new Shared.Models.Model {
DateCreate = DateTime.Now, Path = modelInfo.ModelPath, Drawings = Drawings
};
notify.Close();
if (Errors.Count > 0)
{
ReportErrors Report = new ReportErrors();
Report.Report_DGV.AutoGenerateColumns = false;
Report.Report_DGV.DataSource = Errors;
Report.ShowDialog();
}
if (Model.Drawings.Count() > 0)
{
logger.Info("Начат показ чертежей");
Operations operations = new Operations();
operations.ShowData(Model, user);
}
}
catch (Exception E)
{
maillogger.SendErrorLog(E.ToString());
logger.Error(E.ToString());
MessageBox.Show("Ошибка операции", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
private void button2_Click(object sender, EventArgs e)
{
try
{
System.IO.DirectoryInfo dir = new System.IO.DirectoryInfo(plotfileDirectory);
if (dir.Exists)
{
string datetime = DateTime.Now.ToString().Replace(':', '-').Replace('/', '-');
System.IO.DirectoryInfo datefolder = new System.IO.DirectoryInfo(plotfileDirectory + @"\" + datetime + @"\");
datefolder.Create();
System.Diagnostics.Process.Start(datefolder.FullName);
DrawingEnumerator drawingEnum = drawingHandler.GetDrawingSelector().GetSelected();
while (drawingEnum.MoveNext())
{
Drawing drawing = (Drawing)drawingEnum.Current;
System.Reflection.PropertyInfo propertyInfo = drawing.GetType().GetProperty("Identifier", System.Reflection.BindingFlags.Instance | System.Reflection.BindingFlags.NonPublic);
object value = propertyInfo.GetValue(drawing, null);
Identifier Identifier = (Identifier)value;
Beam fakebeam = new Beam();
fakebeam.Identifier = Identifier;
string RevisionMark = "";
bool rev = fakebeam.GetReportProperty("REVISION.LAST_MARK", ref RevisionMark);
string drawingMark = "";
if (drawing is SinglePartDrawing || drawing is AssemblyDrawing)
{
drawingMark = drawing.Mark.Replace("[", "").Replace(".", "").Replace("]", "") + RevisionMark;
}
if (drawing is GADrawing)
{
if (RevisionMark.Length > 0)
{
RevisionMark = "-" + RevisionMark;
}
drawingMark = drawing.Title2 + RevisionMark;
}
System.IO.FileInfo file = new System.IO.FileInfo(dir.FullName + @"\" + drawingMark + ".pdf");
if (file.Exists)
{
if (drawing is SinglePartDrawing)
{
System.IO.DirectoryInfo singlePartDrawingFolder = new System.IO.DirectoryInfo(datefolder.FullName + @"\FIT\");
singlePartDrawingFolder.Create();
file.MoveTo(singlePartDrawingFolder.FullName + file.Name);
}
if (drawing is AssemblyDrawing)
{
System.IO.DirectoryInfo assemblyDrawingFolder = new System.IO.DirectoryInfo(datefolder.FullName + @"\ASS\");
assemblyDrawingFolder.Create();
for (int i = 0; i < papersizeNames.Count; i++)
{
Tekla.Structures.Drawing.Size m = (Tekla.Structures.Drawing.Size)papersizeDimensions[i];
if (drawing.Layout.SheetSize.Height == m.Height && drawing.Layout.SheetSize.Width == m.Width)
{
System.IO.DirectoryInfo assemblyDrawingSizeFolder = new System.IO.DirectoryInfo(datefolder.FullName + @"\ASS\" + papersizeNames[i].ToString() + @"\");
assemblyDrawingSizeFolder.Create();
file.MoveTo(assemblyDrawingSizeFolder.FullName + file.Name);
}
}
}
if (drawing is GADrawing)
{
System.IO.DirectoryInfo gaDrawingFolder = new System.IO.DirectoryInfo(datefolder.FullName + @"\GAS\");
gaDrawingFolder.Create();
file.MoveTo(gaDrawingFolder.FullName + file.Name);
}
}
}
}
}
catch { }
}
public void GetData(Shared.Models.User user)
{
try
{
DrawingEnumerator SelectedDrawings = CourretDrawingHandler.GetDrawingSelector().GetSelected();
logger.Info("Чертежи успешно получены");
Drawings = new List <Shared.Models.Drawing>();
DrawingErrors = new List <StringErrorBindingModel>();
DetailsErrors = new List <StringErrorBindingModel>();
DetailsWarnings = new List <StringErrorBindingModel>();
while (SelectedDrawings.MoveNext())
{
try
{
if (SelectedDrawings.Current is AssemblyDrawing)
{
Assembly assembly = model.SelectModelObject(((SelectedDrawings.Current as AssemblyDrawing)).AssemblyIdentifier) as Assembly;
if (!ChechedDate(assembly))
{
throw new Exception("Не заполнено поле \"Дата\"");
}
GetDrawing(assembly, SelectedDrawings.Current as AssemblyDrawing);
}
}
catch (Exception E)
{
String Number = "";
String List = "";
Assembly assembly = model.SelectModelObject(((SelectedDrawings.Current as AssemblyDrawing)).AssemblyIdentifier) as Assembly;
assembly.GetReportProperty("CUSTOM.Zakaz", ref Number);
assembly.GetReportProperty("CUSTOM.Drw_SheetRev", ref List);
logger.Error(E.ToString());
DrawingErrors.Add(new StringErrorBindingModel {
Order = Number, List = List, Error = E.Message
});
}
}
logger.Info("Чертежи добавлены");
ModelInfo modelInfo = model.GetInfo();
string ModelPath = modelInfo.ModelPath;
if (ModelPath.Substring(0, 2) != @"\\")
{
using (var managementObject = new ManagementObject())
{
managementObject.Path = new ManagementPath($"Win32_LogicalDisk='{ModelPath.Substring(0, 2)}'");
var driveType = (DriveType)(uint)managementObject["DriveType"];
var networkPath = Convert.ToString(managementObject["ProviderName"]);
ModelPath = networkPath + ModelPath.Remove(0, 2);
}
}
ModelPath = ModelPath.Replace("tekla-fs", "10.0.7.249");
Model = new Shared.Models.Model {
DateCreate = DateTime.Now, Path = ModelPath, Drawings = Drawings
};
notify.Close();
if (DetailsWarnings.Count > 0)
{
ReportWarnings Report = new ReportWarnings();
Report.Report_DGV.AutoGenerateColumns = false;
Report.Report_DGV.DataSource = DetailsWarnings;
if (Report.ShowDialog() != DialogResult.OK)
{
for (int i = 0; i < DetailsWarnings.Count; i++)
{
Drawings.RemoveAll(p => p.Order == DetailsWarnings[i].Order && p.List == DetailsWarnings[i].List);
}
}
}
if (DetailsErrors.Count > 0)
{
ReportErrors Report = new ReportErrors();
Report.Text = "Отчет об ошибках деталей";
Report.label1.Text = "Отчет об ошибках деталей";
Report.Report_DGV.AutoGenerateColumns = false;
Report.Report_DGV.DataSource = DetailsErrors;
Report.ShowDialog();
}
if (DrawingErrors.Count > 0)
{
ReportErrors Report = new ReportErrors();
Report.Text = "Отчет об ошибках чертежей";
Report.label1.Text = "Отчет об ошибках чертежей";
Report.Report_DGV.AutoGenerateColumns = false;
Report.Report_DGV.DataSource = DrawingErrors;
Report.ShowDialog();
}
if (Model.Drawings.Count() > 0)
{
logger.Info("Начат показ чертежей");
Operations operations = new Operations();
operations.ShowData(Model, user);
}
}
catch (Exception E)
{
maillogger.SendErrorLog(E.ToString());
logger.Error(E.ToString());
MessageBox.Show("Ошибка операции", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
private void button1_Click(object sender, EventArgs e)
{
try
{
string printer = cmbPrinter.Text;
string size = "";
double scale = 1;
PrintAttributes printAttributes = new PrintAttributes();
printAttributes.ScalingType = DotPrintScalingType.Scale;
printAttributes.PrintToMultipleSheet = false;
printAttributes.NumberOfCopies = 1;
printAttributes.Orientation = DotPrintOrientationType.Auto;
printAttributes.PrintArea = DotPrintAreaType.EntireDrawing;
DrawingEnumerator drawingEnum = drawingHandler.GetDrawingSelector().GetSelected();
while (drawingEnum.MoveNext())
{
Drawing drawing = (Drawing)drawingEnum.Current;
for (int i = 0; i < printerNames.Count; i++)
{
string printerName = printerNames[i].ToString();
if (printerName == cmbPrinter.Text)
{
double printerScale;
bool printerScaleBool = double.TryParse(printerScales[i].ToString(), out printerScale);
if (printerScaleBool)
{
for (int c = 0; c < papersizeDimensions.Count; c++)
{
Tekla.Structures.Drawing.Size m = (Tekla.Structures.Drawing.Size)papersizeDimensions[c];
if (drawing.Layout.SheetSize.Height == m.Height && drawing.Layout.SheetSize.Width == m.Width)
{
size = (string)papersizeNames[c];
}
}
scale = printerScale;
}
else
{
if (cmbSize.Text != "Auto")
{
for (int c = 0; c < printsizeNames.Count; c++)
{
if (cmbSize.Text == printsizeNames[c].ToString())
{
size = printsizeNames[c].ToString();
Tekla.Structures.Drawing.Size n = (Tekla.Structures.Drawing.Size)printsizeDimensions[c];
scale = n.Width / drawing.Layout.SheetSize.Width;
scale = double.Parse(scale.ToString("F2"));
}
}
}
else if (cmbSize.Text == "Auto")
{
for (int c = 0; c < papersizeNames.Count; c++)
{
Tekla.Structures.Drawing.Size m = (Tekla.Structures.Drawing.Size)papersizeDimensions[c];
if (drawing.Layout.SheetSize.Height == m.Height && drawing.Layout.SheetSize.Width == m.Width)
{
size = papersizeAutoPrintsizeNames[c].ToString();
scale = double.Parse(papersizeAutoScales[c].ToString());
}
}
}
}
}
}
printAttributes.Scale = scale;
printAttributes.PrinterInstance = printer + "-" + size;
drawingHandler.PrintDrawing(drawing, printAttributes);
}
}
catch (Exception ex) { MessageBox.Show(ex.Message); }
}
