/// <summary>
/// Initializes a new instance of the <c>LinearDimension</c> class.
/// </summary>
/// <param name="firstPoint">First reference <see cref="Vector2">point</see> of the dimension.</param>
/// <param name="secondPoint">Second reference <see cref="Vector2">point</see> of the dimension.</param>
/// <param name="offset">Distance between the mid point reference line and the dimension line.</param>
/// <param name="rotation">Rotation in degrees of the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference points define the distance to be measure.</remarks>
public LinearDimension(Vector2 firstPoint, Vector2 secondPoint, double offset, double rotation, DimensionStyle style)
: base(DimensionType.Linear)
{
this.firstRefPoint = firstPoint;
this.secondRefPoint = secondPoint;
this.offset = offset;
this.rotation = MathHelper.NormalizeAngle(rotation);
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
}
/// <summary>
/// Initializes a new instance of the <c>Angular2LineDimension</c> class.
/// </summary>
/// <param name="firstLine">First <see cref="Line">line</see> that defines the angle to measure.</param>
/// <param name="secondLine">Second <see cref="Line">line</see> that defines the angle to measure.</param>
/// <param name="offset">Distance between the center point and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
public Angular2LineDimension(Line firstLine, Line secondLine, double offset, Vector3 normal, DimensionStyle style)
: base(DimensionType.Angular)
{
if (firstLine == null)
{
throw new ArgumentNullException(nameof(firstLine));
}
if (secondLine == null)
{
throw new ArgumentNullException(nameof(secondLine));
}
if (Vector3.AreParallel(firstLine.Direction, secondLine.Direction))
{
throw new ArgumentException("The two lines that define the dimension are parallel.");
}
IList <Vector3> ocsPoints =
MathHelper.Transform(
new[]
{
firstLine.StartPoint,
firstLine.EndPoint,
secondLine.StartPoint,
secondLine.EndPoint
},
normal, CoordinateSystem.World, CoordinateSystem.Object);
startFirstLine = new Vector2(ocsPoints[0].X, ocsPoints[0].Y);
endFirstLine = new Vector2(ocsPoints[1].X, ocsPoints[1].Y);
startSecondLine = new Vector2(ocsPoints[2].X, ocsPoints[2].Y);
endSecondLine = new Vector2(ocsPoints[3].X, ocsPoints[3].Y);
if (offset < 0)
{
throw new ArgumentOutOfRangeException(nameof(offset), "The offset value must be equal or greater than zero.");
}
this.offset = offset;
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
Style = style;
Normal = normal;
Elevation = ocsPoints[0].Z;
Update();
}
/// <summary>
/// Initializes a new instance of the <c>Angular3PointDimension</c> class.
/// </summary>
/// <param name="centerPoint">Center of the angle arc to measure.</param>
/// <param name="startPoint">Angle start point.</param>
/// <param name="endPoint">Angle end point.</param>
/// <param name="offset">Distance between the center point and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
public Angular3PointDimension(Vector2 centerPoint, Vector2 startPoint, Vector2 endPoint, double offset, DimensionStyle style)
: base(DimensionType.Angular3Point)
{
Vector2 dir1 = startPoint - centerPoint;
Vector2 dir2 = endPoint - centerPoint;
if (Vector2.AreParallel(dir1, dir2))
{
throw new ArgumentException("The two lines that define the dimension are parallel.");
}
this.center = centerPoint;
this.start = startPoint;
this.end = endPoint;
if (offset < 0)
{
throw new ArgumentOutOfRangeException(nameof(offset), "The offset value must be equal or greater than zero.");
}
this.offset = offset;
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
this.Update();
}
/// <summary>
/// Initializes a new instance of the <c>OrdinateDimension</c> class.
/// </summary>
/// <param name="origin">Origin <see cref="Vector2">point</see> in local coordinates of the ordinate dimension.</param>
/// <param name="featurePoint">Base location <see cref="Vector2">point</see> in local coordinates of the ordinate dimension.</param>
/// <param name="leaderEndPoint">Leader end <see cref="Vector2">point</see> in local coordinates of the ordinate dimension</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>
/// Uses the difference between the feature location and the leader endpoint to determine whether it is an X or a Y ordinate dimension.
/// If the difference in the Y ordinate is greater, the dimension measures the X ordinate. Otherwise, it measures the Y ordinate.
/// </remarks>
public OrdinateDimension(Vector2 origin, Vector2 featurePoint, Vector2 leaderEndPoint, DimensionStyle style)
: base(DimensionType.Ordinate)
{
this.defPoint = origin;
this.firstPoint = featurePoint;
this.secondPoint = leaderEndPoint;
this.textRefPoint = leaderEndPoint;
Vector2 vec = leaderEndPoint - featurePoint;
this.axis = vec.Y > vec.X ? OrdinateDimensionAxis.X : OrdinateDimensionAxis.Y;
this.rotation = 0.0;
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
}
/// <summary>
/// Initializes a new instance of the <c>Angular2LineDimension</c> class.
/// </summary>
/// <param name="startFirstLine">Start <see cref="Vector2">point</see> of the first line that defines the angle to measure.</param>
/// <param name="endFirstLine">End <see cref="Vector2">point</see> of the first line that defines the angle to measure.</param>
/// <param name="startSecondLine">Start <see cref="Vector2">point</see> of the second line that defines the angle to measure.</param>
/// <param name="endSecondLine">End <see cref="Vector2">point</see> of the second line that defines the angle to measure.</param>
/// <param name="offset">Distance between the center point and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
public Angular2LineDimension(Vector2 startFirstLine, Vector2 endFirstLine, Vector2 startSecondLine, Vector2 endSecondLine, double offset, DimensionStyle style)
: base(DimensionType.Angular)
{
Vector2 dir1 = endFirstLine - startFirstLine;
Vector2 dir2 = endSecondLine - startSecondLine;
if (Vector2.AreParallel(dir1, dir2))
{
throw new ArgumentException("The two lines that define the dimension are parallel.");
}
this.startFirstLine = startFirstLine;
this.endFirstLine = endFirstLine;
this.startSecondLine = startSecondLine;
this.endSecondLine = endSecondLine;
if (offset < 0)
{
throw new ArgumentOutOfRangeException(nameof(offset), "The offset value must be equal or greater than zero.");
}
this.offset = offset;
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
Style = style;
Update();
}
/// <summary>
/// Initializes a new instance of the <c>AlignedDimension</c> class.
/// </summary>
/// <param name="firstPoint">First reference <see cref="Vector3">point</see> of the dimension.</param>
/// <param name="secondPoint">Second reference <see cref="Vector3">point</see> of the dimension.</param>
/// <param name="offset">Distance between the reference line and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference points define the distance to be measure.</remarks>
public AlignedDimension(Vector3 firstPoint, Vector3 secondPoint, double offset, DimensionStyle style)
: base(DimensionType.Aligned)
{
this.firstRefPoint = firstPoint;
this.secondRefPoint = secondPoint;
this.offset = offset;
if (style == null)
{
throw new ArgumentNullException("style", "The Dimension style cannot be null.");
}
this.style = style;
}
/// <summary>
/// Initializes a new instance of the <c>OrdinateDimension</c> class.
/// </summary>
/// <param name="origin">Origin <see cref="Vector2">point</see> of the ordinate dimension.</param>
/// <param name="featurePoint">Base location <see cref="Vector2">point</see> in local coordinates of the ordinate dimension.</param>
/// <param name="length">Length of the dimension line.</param>
/// <param name="axis">Length of the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The local coordinate system of the dimension is defined by the dimension normal and the rotation value.</remarks>
public OrdinateDimension(Vector2 origin, Vector2 featurePoint, double length, OrdinateDimensionAxis axis, DimensionStyle style)
: this(origin, featurePoint, length, axis, 0.0, style)
{
}
/// <summary>
/// Initializes a new instance of the <c>Angular2LineDimension</c> class.
/// </summary>
/// <param name="startFirstLine">Start <see cref="Vector2">point</see> of the first line that defines de angle to measure.</param>
/// <param name="endFirstLine">End <see cref="Vector2">point</see> of the first line that defines de angle to measure.</param>
/// <param name="startSecondLine">Start <see cref="Vector2">point</see> of the second line that defines de angle to measure.</param>
/// <param name="endSecondLine">End <see cref="Vector2">point</see> of the second line that defines de angle to measure.</param>
/// <param name="offset">Distance between the center point and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
public Angular2LineDimension(Vector2 startFirstLine, Vector2 endFirstLine, Vector2 startSecondLine, Vector2 endSecondLine, double offset, DimensionStyle style)
: this(new Vector3(startFirstLine.X, startFirstLine.Y, 0.0), new Vector3(endFirstLine.X, endFirstLine.Y, 0.0), new Vector3(startSecondLine.X, startSecondLine.Y, 0.0), new Vector3(endSecondLine.X, endSecondLine.Y, 0.0), offset, style)
{
}
/// <summary>
/// Initializes a new instance of the <c>Angular2LineDimension</c> class.
/// </summary>
/// <param name="startFirstLine">Start <see cref="Vector3">point</see> of the first line that defines de angle to measure.</param>
/// <param name="endFirstLine">End <see cref="Vector3">point</see> of the first line that defines de angle to measure.</param>
/// <param name="startSecondLine">Start <see cref="Vector3">point</see> of the second line that defines de angle to measure.</param>
/// <param name="endSecondLine">End <see cref="Vector3">point</see> of the second line that defines de angle to measure.</param>
/// <param name="offset">Distance between the center point and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
public Angular2LineDimension(Vector3 startFirstLine, Vector3 endFirstLine, Vector3 startSecondLine, Vector3 endSecondLine, double offset, DimensionStyle style)
: base(DimensionType.Angular)
{
this.startFirstLine = startFirstLine;
this.endFirstLine = endFirstLine;
this.startSecondLine = startSecondLine;
this.endSecondLine = endSecondLine;
this.offset = offset;
if (style == null)
{
throw new ArgumentNullException("style", "The Dimension style cannot be null.");
}
this.style = style;
this.normal = this.CaluculateNormal();
}
/// <summary>
/// Initializes a new instance of the <c>LinearDimension</c> class.
/// </summary>
/// <param name="referenceLine">Reference <see cref="Line">line</see> of the dimension.</param>
/// <param name="offset">Distance between the reference line and the dimension line.</param>
/// <param name="rotation">Rotation in degrees of the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference points define the distance to be measure.</remarks>
public LinearDimension(Line referenceLine, double offset, double rotation, DimensionStyle style)
: this(referenceLine, offset, rotation, Vector3.UnitZ, style)
{
}
/// <summary>
/// Initializes a new instance of the <c>LinearDimension</c> class.
/// </summary>
/// <param name="referenceLine">Reference <see cref="Line">line</see> of the dimension.</param>
/// <param name="offset">Distance between the reference line and the dimension line.</param>
/// <param name="rotation">Rotation in degrees of the dimension line.</param>
/// <param name="normal">Normal vector of the plane where the dimension is defined.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference line define the distance to be measure.</remarks>
public LinearDimension(Line referenceLine, double offset, double rotation, Vector3 normal, DimensionStyle style)
: base(DimensionType.Linear)
{
if (referenceLine == null)
{
throw new ArgumentNullException(nameof(referenceLine));
}
IList <Vector3> ocsPoints = MathHelper.Transform(
new List <Vector3> {
referenceLine.StartPoint, referenceLine.EndPoint
}, normal, CoordinateSystem.World, CoordinateSystem.Object);
this.firstRefPoint = new Vector2(ocsPoints[0].X, ocsPoints[0].Y);
this.secondRefPoint = new Vector2(ocsPoints[1].X, ocsPoints[1].Y);
if (offset < 0)
{
throw new ArgumentOutOfRangeException(nameof(offset), "The offset value must be equal or greater than zero.");
}
this.offset = offset;
this.rotation = MathHelper.NormalizeAngle(rotation);
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
this.Normal = normal;
this.Elevation = ocsPoints[0].Z;
this.Update();
}
/// <summary>
/// Initializes a new instance of the <c>LinearDimension</c> class.
/// </summary>
/// <param name="firstPoint">First reference <see cref="Vector2">point</see> of the dimension.</param>
/// <param name="secondPoint">Second reference <see cref="Vector2">point</see> of the dimension.</param>
/// <param name="offset">Distance between the mid point reference line and the dimension line.</param>
/// <param name="rotation">Rotation in degrees of the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference points define the distance to be measure.</remarks>
public LinearDimension(Vector2 firstPoint, Vector2 secondPoint, double offset, double rotation, DimensionStyle style)
: base(DimensionType.Linear)
{
this.firstRefPoint = firstPoint;
this.secondRefPoint = secondPoint;
if (offset < 0)
{
throw new ArgumentOutOfRangeException(nameof(offset), "The offset value must be equal or greater than zero.");
}
this.offset = offset;
this.rotation = MathHelper.NormalizeAngle(rotation);
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
this.Update();
}
/// <summary>
/// Initializes a new instance of the <c>DiametricDimension</c> class.
/// </summary>
/// <param name="centerPoint">Center <see cref="Vector2">point</see> of the circunference.</param>
/// <param name="referencePoint"><see cref="Vector2">Point</see> on circle or arc.</param>
/// <param name="offset">Distance between the reference point and the dimension text</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The center point and the definition point define the distance to be measure.</remarks>
public DiametricDimension(Vector2 centerPoint, Vector2 referencePoint, double offset, DimensionStyle style)
: this(new Vector3(centerPoint.X, centerPoint.Y, 0.0), new Vector3(referencePoint.X, referencePoint.Y, 0.0), offset, style)
{
}
/// <summary>
/// Creates a Leader geometry object
/// </summary>
/// <param name="text"></param>
/// <param name="plane"></param>
/// <param name="dimstyle"></param>
/// <param name="points"></param>
/// <returns></returns>
/// <since>6.0</since>
public static Leader Create(string text, Plane plane, DimensionStyle dimstyle, Point3d[] points)
{
return(CreateWithRichText(AnnotationBase.PlainTextToRtf(text), plane, dimstyle, points));
}
protected virtual DimensionStyle OnDimensionStyleChangedEvent(DimensionStyle oldStyle, DimensionStyle newStyle)
{
DimensionStyleChangedEventHandler ae = this.DimensionStyleChanged;
if (ae != null)
{
TableObjectChangedEventArgs <DimensionStyle> eventArgs = new TableObjectChangedEventArgs <DimensionStyle>(oldStyle, newStyle);
ae(this, eventArgs);
return(eventArgs.NewValue);
}
return(newStyle);
}
/// <summary>
/// Initializes a new instance of the <c>Angular2LineDimension</c> class.
/// </summary>
/// <param name="firstLine">First <see cref="Line">line</see> that defines the angle to measure.</param>
/// <param name="secondLine">Second <see cref="Line">line</see> that defines the angle to measure.</param>
/// <param name="offset">Distance between the center point and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
public Angular2LineDimension(Line firstLine, Line secondLine, double offset, DimensionStyle style)
: this(firstLine.StartPoint, firstLine.EndPoint, secondLine.StartPoint, secondLine.EndPoint, offset, style)
{
}
/// <summary>
/// Initializes a new instance of the <c>AlignedDimension</c> class.
/// </summary>
/// <param name="firstPoint">First reference <see cref="Vector2">point</see> of the dimension.</param>
/// <param name="secondPoint">Second reference <see cref="Vector2">point</see> of the dimension.</param>
/// <param name="offset">Distance between the reference line and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference points define the distance to be measure.</remarks>
public AlignedDimension(Vector2 firstPoint, Vector2 secondPoint, double offset, DimensionStyle style)
: this(new Vector3(firstPoint.X, firstPoint.Y, 0.0), new Vector3(secondPoint.X, secondPoint.Y, 0.0), offset, style)
{
}
/// <summary>
/// Initializes a new instance of the <c>AlignedDimension</c> class.
/// </summary>
/// <param name="firstPoint">First reference <see cref="Vector2">point</see> of the dimension.</param>
/// <param name="secondPoint">Second reference <see cref="Vector2">point</see> of the dimension.</param>
/// <param name="offset">Distance between the reference line and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference points define the distance to be measure.</remarks>
public AlignedDimension(Vector2 firstPoint, Vector2 secondPoint, double offset, DimensionStyle style)
: base(DimensionType.Aligned)
{
this.firstRefPoint = firstPoint;
this.secondRefPoint = secondPoint;
if (offset < 0)
{
throw new ArgumentOutOfRangeException(nameof(offset), "The offset value must be equal or greater than zero.");
}
this.offset = offset;
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
this.Update();
}
/// <summary>
/// Initializes a new instance of the <c>AlignedDimension</c> class.
/// </summary>
/// <param name="referenceLine">Reference <see cref="Line">line</see> of the dimension.</param>
/// <param name="offset">Distance between the reference line and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference line define the distance to be measure.</remarks>
public AlignedDimension(Line referenceLine, double offset, DimensionStyle style)
: this(referenceLine.StartPoint, referenceLine.EndPoint, offset, style)
{
this.normal = referenceLine.Normal;
}
/// <summary>
/// Initializes a new instance of the <c>AlignedDimension</c> class.
/// </summary>
/// <param name="referenceLine">Reference <see cref="Line">line</see> of the dimension.</param>
/// <param name="offset">Distance between the reference line and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference points define the distance to be measure.</remarks>
public AlignedDimension(Line referenceLine, double offset, DimensionStyle style)
: this(referenceLine, offset, Vector3.UnitZ, style)
{
}
/// <summary>
/// Initializes a new instance of the <c>OrdinateDimension</c> class.
/// </summary>
/// <param name="origin">Origin <see cref="Vector3">point</see> in world coordinates of the ordinate dimension.</param>
/// <param name="featurePoint">Base location <see cref="Vector2">point</see> in local coordinates of the ordinate dimension.</param>
/// <param name="length">Length of the dimension line.</param>
/// <param name="axis">Local axis that measures the ordinate dimension.</param>
/// <param name="rotation">Angle of rotation in degrees of the dimension lines.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The local coordinate system of the dimension is defined by the dimension normal and the rotation value.</remarks>
public OrdinateDimension(Vector2 origin, Vector2 featurePoint, double length, OrdinateDimensionAxis axis, double rotation, DimensionStyle style)
: base(DimensionType.Ordinate)
{
this.defPoint = origin;
this.rotation = MathHelper.NormalizeAngle(rotation);
this.firstPoint = featurePoint;
this.axis = axis;
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
double angle = rotation * MathHelper.DegToRad;
if (this.Axis == OrdinateDimensionAxis.X)
{
angle += MathHelper.HalfPI;
}
this.secondPoint = Vector2.Polar(featurePoint, length, angle);
this.textRefPoint = this.secondPoint;
}
private void ReAsignHandlersAndDefaultObjects()
{
this.handleCount = 100;
//add default viewports
ViewPort active = ViewPort.Active;
if (!this.viewports.ContainsKey(active.Name))
{
this.viewports.Add(active.Name, active);
}
foreach (ViewPort viewPort in this.viewports.Values)
{
this.handleCount = viewPort.AsignHandle(this.handleCount);
}
//add default layer
Layer.PlotStyleHandle = Convert.ToString(this.handleCount++, 16);
Layer byDefault = Layer.Default;
if (!this.layers.ContainsKey(byDefault.Name))
{
this.layers.Add(byDefault.Name, byDefault);
}
foreach (Layer layer in this.layers.Values)
{
this.handleCount = layer.AsignHandle(this.handleCount);
}
// add default line types
LineType byLayer = LineType.ByLayer;
LineType byBlock = LineType.ByBlock;
if (!this.lineTypes.ContainsKey(byLayer.Name))
{
this.lineTypes.Add(byLayer.Name, byLayer);
}
if (!this.lineTypes.ContainsKey(byBlock.Name))
{
this.lineTypes.Add(byBlock.Name, byBlock);
}
foreach (LineType lineType in this.lineTypes.Values)
{
this.handleCount = lineType.AsignHandle(this.handleCount);
}
// add default text style
TextStyle defaultStyle = TextStyle.Default;
if (!this.textStyles.ContainsKey(defaultStyle.Name))
{
this.textStyles.Add(defaultStyle.Name, defaultStyle);
}
foreach (TextStyle textStyle in this.textStyles.Values)
{
this.handleCount = textStyle.AsignHandle(this.handleCount);
}
// add default blocks
Block modelSpace = Block.ModelSpace;
Block paperSpace = Block.PaperSpace;
if (!this.blocks.ContainsKey(modelSpace.Name))
{
this.blocks.Add(modelSpace.Name, modelSpace);
}
if (!this.blocks.ContainsKey(paperSpace.Name))
{
this.blocks.Add(paperSpace.Name, paperSpace);
}
foreach (Block block in this.blocks.Values)
{
this.handleCount = block.AsignHandle(this.handleCount);
}
// add default application registry
ApplicationRegistry defaultAppId = ApplicationRegistry.Default;
if (!this.appRegisterNames.ContainsKey(defaultAppId.Name))
{
this.appRegisterNames.Add(defaultAppId.Name, defaultAppId);
}
foreach (ApplicationRegistry appId in this.appRegisterNames.Values)
{
this.handleCount = appId.AsignHandle(this.handleCount);
}
//add default dimension style
DimensionStyle defaultDimStyle = DimensionStyle.Default;
if (!this.dimStyles.ContainsKey(defaultDimStyle.Name))
{
this.dimStyles.Add(defaultDimStyle.Name, defaultDimStyle);
}
foreach (DimensionStyle style in this.dimStyles.Values)
{
this.handleCount = style.AsignHandle(this.handleCount);
}
foreach (Arc entity in this.arcs)
{
this.handleCount = entity.AsignHandle(this.handleCount);
}
foreach (Ellipse entity in this.ellipses)
{
this.handleCount = entity.AsignHandle(this.handleCount);
}
foreach (Face3d entity in this.faces3d)
{
this.handleCount = entity.AsignHandle(this.handleCount);
}
foreach (Solid entity in this.solids)
{
this.handleCount = entity.AsignHandle(this.handleCount);
}
foreach (Insert entity in this.inserts)
{
this.handleCount = entity.AsignHandle(this.handleCount);
}
foreach (IPolyline entity in this.polylines)
{
this.handleCount = ((DxfObject)entity).AsignHandle(this.handleCount);
}
foreach (Line entity in this.lines)
{
this.handleCount = entity.AsignHandle(this.handleCount);
}
foreach (Circle entity in this.circles)
{
this.handleCount = entity.AsignHandle(this.handleCount);
}
foreach (Point entity in this.points)
{
this.handleCount = entity.AsignHandle(this.handleCount);
}
foreach (Text entity in this.texts)
{
this.handleCount = entity.AsignHandle(this.handleCount);
}
}
/// <summary>
/// Initializes a new instance of the <c>Angular3PointDimension</c> class.
/// </summary>
/// <param name="centerPoint">Center of the angle arc to measure.</param>
/// <param name="startPoint">Angle start point.</param>
/// <param name="endPoint">Angle end point.</param>
/// <param name="offset">Distance between the center point and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
public Angular3PointDimension(Vector2 centerPoint, Vector2 startPoint, Vector2 endPoint, double offset, DimensionStyle style)
: base(DimensionType.Angular3Point)
{
this.center = centerPoint;
this.start = startPoint;
this.end = endPoint;
if (offset < 0)
{
throw new ArgumentOutOfRangeException(nameof(offset), "The offset value must be equal or greater than zero.");
}
this.offset = offset;
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
this.Update();
}
/// <summary>
/// Initializes a new instance of the <c>Leader</c> class.
/// </summary>
/// <param name="text">Leader text annotation.</param>
/// <param name="vertexes">List of leader vertexes in local coordinates.</param>
/// <param name="style">Leader style.</param>
public Leader(string text, IEnumerable <Vector2> vertexes, DimensionStyle style)
: this(vertexes, style)
{
this.Annotation = this.BuildAnnotation(text);
}
/// <summary>
/// Initializes a new instance of the <c>Angular2LineDimension</c> class.
/// </summary>
/// <param name="firstLine">First <see cref="Line">line</see> that defines the angle to measure.</param>
/// <param name="secondLine">Second <see cref="Line">line</see> that defines the angle to measure.</param>
/// <param name="offset">Distance between the center point and the dimension line.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
public Angular2LineDimension(Line firstLine, Line secondLine, double offset, DimensionStyle style)
: this(firstLine, secondLine, offset, Vector3.UnitZ, style)
{
}
/// <summary>
/// Initializes a new instance of the <c>Leader</c> class.
/// </summary>
/// <param name="tolerance">Leader tolerance annotation.</param>
/// <param name="vertexes">List of leader vertexes in local coordinates.</param>
/// <param name="style">Leader style.</param>
public Leader(ToleranceEntry tolerance, IEnumerable <Vector2> vertexes, DimensionStyle style)
: this(vertexes, style)
{
this.Annotation = this.BuildAnnotation(tolerance);
}
/// <summary>
/// Draws the panel.
/// </summary>
/// <param name="xLowerBound">The x lower bound.</param>
/// <param name="xUpperBound">The x upper bound.</param>
/// <param name="yLowerBound">The y lower bound.</param>
/// <param name="yUpperBound">The y upper bound.</param>
/// <param name="panel">The panel.</param>
/// <param name="para">The para.</param>
public static void drawPanel(double xLowerBound, double xUpperBound, double yLowerBound, double yUpperBound, PerforationPanel panel, bool fixingHolesManipulated, bool enablePerf)
{
RhinoDoc doc = RhinoDoc.ActiveDoc;
List <Guid> guidList = new List <Guid>();
string layerName = null; //name of layers
int layerIndex = 0; //index of layers
Rhino.DocObjects.Layer parent_layer_Approval = null; //create variable to hold approval layer
Rhino.DocObjects.Layer parent_layer_Nesting = null; //create variable to hold nesting layer
//Rhino.DocObjects.Layer childlayer = null; //Create a variable to hold child layers
string text = "";
double height = panel.labelHeight / 3;
const string font = "Arial";
Guid burrLeader;
RhinoObject labelText;
Rhino.Geometry.Point3d pt = new Rhino.Geometry.Point3d(0, 0, 0);
Rhino.Geometry.Plane plane = doc.Views.ActiveView.ActiveViewport.ConstructionPlane();
//start
//Creating layer called "Layers for Approval Drawings" to make it a parent layer
layerName = "LAYERS FOR APPROVAL DRAWINGS";
// Does a layer with the same name already exist?
layerIndex = doc.Layers.Find(layerName, true);
// If layer does not exist
if (layerIndex == -1)
{
// Add a new layer to the document
layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Black);
parent_layer_Approval = doc.Layers[layerIndex]; //set the layer as parent layer
}
else
{
parent_layer_Approval = doc.Layers[layerIndex];
}
layerName = "LAYERS FOR NESTING";
// Does a layer with the same name already exist?
layerIndex = doc.Layers.Find(layerName, true);
// If layer does not exist
if (layerIndex == -1)
{
// Add a new layer to the document
layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Black);
parent_layer_Nesting = doc.Layers[layerIndex];
}
else
{
parent_layer_Nesting = doc.Layers[layerIndex];
}
// Create a new layer called Perimeter
layerName = "PANEL PERIMETER";
layerIndex = createSubLayers.createSubLayer(layerName,
System.Drawing.Color.Black, parent_layer_Nesting); //make Nesting layer the parent layer
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
//Bottom and left justified the panels in the grid (panel x0,x1,y0,y1 - refers to the folds edg (folds layer)
double panelX0 = xLowerBound;
double panelX1 = panelX0 + panel.X;
double panelY0 = yUpperBound;
double panelY1 = panelY0 + panel.Y;
List <Point3d> list = new List <Point3d>();
panel.Perimeter = doc.Objects.AddLine(new Point3d(panelX0, panelY1, 0), new Point3d(panelX1, panelY1, 0));
guidList.Add(panel.Perimeter);
panel.Perimeter = doc.Objects.AddLine(new Point3d(panelX0, panelY0, 0), new Point3d(panelX0, panelY1, 0));
guidList.Add(panel.Perimeter);
panel.Perimeter = doc.Objects.AddLine(new Point3d(panelX0, panelY0, 0), new Point3d(panelX1, panelY0, 0));
guidList.Add(panel.Perimeter);
panel.Perimeter = doc.Objects.AddLine(new Point3d(panelX1, panelY0, 0), new Point3d(panelX1, panelY1, 0));
guidList.Add(panel.Perimeter);
//MetrixUtilities.joinCurves(doc.Layers.Find("PANEL PERIMETER", true)); //join the closed curves using the method
//Calculating the borders
double borderX0 = panelX0 + panel.LeftBorder; //refers to the borders corners
double borderY0 = panelY0 + panel.BottomBorder;
double borderX1 = panelX1 - panel.RightBorder;
double borderY1 = panelY1 - panel.TopBorder;
BoundingBox panelBox = new BoundingBox(borderX0, borderY0, 0, borderX1, borderY1, 0);
List <Point3d> rectangle_corners = panelBox.GetCorners().Distinct().ToList();
// add 1st point at last to close the loop
rectangle_corners.Add(rectangle_corners[0]);
// Create a new layer called Border
layerName = "BORDERS";
layerIndex = createSubLayers.createSubLayer(layerName,
System.Drawing.Color.Purple, parent_layer_Approval); //pass to the method, make Approval layer the parent layer
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
//Add the borders only if the panel is not solid
if (panel.DrawPerf != 3)
{
//Create a bounding box for the borders
panel.Border = doc.Objects.AddPolyline(rectangle_corners);
guidList.Add(panel.Border);
}
// Create a new layer called LABELS
layerName = "LABELS";
layerIndex = createSubLayers.createSubLayer(layerName,
System.Drawing.Color.Red, parent_layer_Nesting); //pass to the method, make Nesting layer the parent layer
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
text = panel.PartName;
height = panel.labelHeight;
pt = new Rhino.Geometry.Point3d(borderX0, borderY0 + 4 + height, 0);
plane = doc.Views.ActiveView.ActiveViewport.ConstructionPlane();
plane.Origin = pt;
panel.Label = doc.Objects.AddText(text, plane, height, font, false, false);
guidList.Add(panel.Label);
RhinoApp.RunScript("SelNone", true);
labelText = doc.Objects.Find(panel.Label);
labelText.Select(true);
BoundingBox bbox = labelText.Geometry.GetBoundingBox(true);
double minX = bbox.Corner(true, true, true).X;
double maxX = bbox.Corner(false, true, true).X;
double minY = bbox.Corner(true, true, true).Y;
double maxY = bbox.Corner(true, false, true).Y;
if (maxX - minX >= panel.X - panel.LeftBorder - panel.RightBorder)
{
double ratio = 1;
labelText.Select(true);
if (panel.Y > panel.X)
{
RhinoApp.RunScript("_-rotate " + bbox.Center.X + "," + bbox.Center.Y + " " + "90", true);
}
if (maxY - minY + 4 >= panel.X - panel.LeftBorder - panel.RightBorder)
{
ratio = (panel.X - panel.LeftBorder - panel.RightBorder) / (2 * (maxY - minY));
if (ratio * (maxX - minX) >= (panel.Y - panel.TopBorder - panel.BottomBorder))
{
ratio = ratio * (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * ratio * (maxX - minX));
}
}
else if (maxX - minX >= panel.Y - panel.TopBorder - panel.BottomBorder)
{
ratio = (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * (maxX - minX));
}
RhinoApp.RunScript("_-Scale " + bbox.Center.X + "," + bbox.Center.Y + " " + ratio, true);
BoundingBox bbox3 = labelText.Geometry.GetBoundingBox(true);
double distance1 = borderX0 + ratio * (bbox3.Max.X - bbox3.Min.X) / 2;
double distance2 = borderY0 + ratio * (bbox3.Max.Y - bbox3.Min.Y) / 2;
if (panel.Y > panel.X)
{
distance1 = borderX0 + ratio * (bbox3.Max.Y - bbox3.Min.Y) / 2;
distance2 = borderY0 + ratio * (bbox3.Max.X - bbox3.Min.X) / 2;
}
RhinoApp.WriteLine(bbox3.Center.ToString());
RhinoApp.RunScript("_-Move " + bbox3.Center.X + "," + bbox3.Center.Y + ",0 " + distance1 + "," + distance2 + ",0", true);
}
else if (maxY - minY >= panel.Y - panel.TopBorder - panel.BottomBorder)
{
double ratio = (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * (maxY - minY));
labelText.Select(true);
RhinoApp.RunScript("_-Scale " + bbox.Center.X + "," + bbox.Center.Y + " " + ratio, true);
BoundingBox bbox2 = labelText.Geometry.GetBoundingBox(true);
double distanceX = borderX0 + ratio * (bbox2.Center.X - bbox2.Min.X) / 2;
double distanceY = panelBox.Min.Y + ratio * (bbox2.Center.Y - bbox.Min.Y) / 2;
RhinoApp.WriteLine(bbox2.Center.ToString());
RhinoApp.RunScript("_-Move " + bbox2.Center.X + "," + bbox2.Center.Y + ",0 " + distanceX + "," + distanceY + ",0", true);
}
labelText.Select(false);
// If dotFontLabel is more than 0 draw the dot font text on the panel, else skip
// if (para.DotFont == 1)
if (panel.DotFontLabel > 0)
{
// Create a new layer called DOT SCRIBE LABEL
layerName = "DOT SCRIBE LABEL";
layerIndex = createSubLayers.createSubLayer(layerName,
System.Drawing.Color.Black, parent_layer_Nesting); //make Nesting layer the parent layer
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
// Put in the Dot Matrix Label
// Draw at the right side of the border aand 10mm from the bottom and 100mm from the left edge
double panelOffset = 0;
if (panel.BottomBorder - 8.7 <= 6)
{
panelOffset = (panel.BottomBorder - 8.7) / 2;
}
else
{
panelOffset = 3.1;
}
if (panel.X < 160)
{
pt = new Point3d(1 * (panelX0 + panelX1) / 2, panelY0 + panelOffset + 8.7, 0);
}
else
{
pt = new Point3d(panelX1 - 100, panelY0 + panelOffset + 8.7, 0);
}
if (panel.DotFontLabellerSide.Equals("Rear"))
{
DotMatrixLabellerCommand.Instance.drawDotMatrix(pt, panel.PartName, 8.7, panel.X); //set the size of dotfont
}
else //If not revered use front labeller
{
DotMatrixFrontLabellerCommand.Instance.drawDotMatrix(pt, panel.PartName, 8.7);
}
}
//checks whether the perforation layers exists, if not create layer and make Approval layer the parent layer
//If exists, make Approval layer the parent layer
layerName = "PERFORATION";
layerIndex = createSubLayers.createSubLayer(layerName,
System.Drawing.Color.Green, parent_layer_Approval);
// doc.Layers.SetCurrentLayerIndex(layerIndex, true);
//Create Temporary Layer
if (panel.DrawPerf == 1)
{
RhinoUtilities.SetActiveLayer("TemporaryPerfLayer", System.Drawing.Color.Green);
doc.Views.Redraw();
RhinoApp.RunScript("SelAll", true);
RhinoApp.RunScript("-_Rotate 0,0,0 -" + panel.patternDirection, true);
PerforationForm perforationForm = new PerforationForm(new Rhino.DocObjects.ObjRef(panel.Border).Curve());
perforationForm.enablePerforation = enablePerf;
perforationForm.drawPerforationDesign(panel.PatternName, true, enablePerf);
RhinoApp.RunScript("SelAll", true);
RhinoApp.RunScript("-_Rotate 0,0,0 " + panel.patternDirection, true);
RhinoApp.RunScript("SelNone", true);
var rhinoObjects = doc.Objects.FindByLayer("TemporaryPerfLayer");
var toolHitObjects = doc.Objects.FindByLayer("TemporaryToolHit");
var temporaryTool2Layer = doc.Objects.FindByLayer("TemporaryTool2Layer");
//Perf objects
if (rhinoObjects != null && rhinoObjects.Length > 1)
{
foreach (var rhinObj in rhinoObjects)
{
rhinObj.Select(true);
}
if (panel.patternDirection == 1)
{
RhinoApp.RunScript("-_Rotate 0,0,0 -90", true);
RhinoApp.RunScript("-_Rotate 0,0,0 90", true);
}
RhinoUtilities.SetActiveLayer(Properties.Settings.Default.PerforationLayerName, System.Drawing.Color.Green);
RhinoApp.RunScript("-_ChangeLayer PERFORATION", true);
int index = doc.Layers.Find("TemporaryPerfLayer", true);
doc.Layers.Delete(index, true);
}
//tool hit objects
if (toolHitObjects != null && toolHitObjects.Length > 1)
{
foreach (var toolhitObj in toolHitObjects)
{
toolhitObj.Select(true);
}
if (panel.patternDirection == 1)
{
RhinoApp.RunScript("-_Rotate 0,0,0 -90", true);
RhinoApp.RunScript("-_Rotate 0,0,0 90", true);
}
RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
RhinoApp.RunScript("-_ChangeLayer TOOL HIT", true);
int index = doc.Layers.Find("TemporaryToolHit", true);
doc.Layers.Delete(index, true);
}
//Tool 2 objects
if (temporaryTool2Layer != null && temporaryTool2Layer.Length > 1)
{
foreach (var tool2Objs in temporaryTool2Layer)
{
tool2Objs.Select(true);
}
if (panel.patternDirection == 1)
{
RhinoApp.RunScript("-_Rotate 0,0,0 -90", true);
RhinoApp.RunScript("-_Rotate 0,0,0 90", true);
}
RhinoUtilities.SetActiveLayer("Tool 2 Layer", System.Drawing.Color.Yellow);
RhinoApp.RunScript("-_ChangeLayer Tool 2 Layer", true);
int index = doc.Layers.Find("TemporaryTool2Layer", true);
doc.Layers.Delete(index, true);
}
doc.Views.Redraw();
}
DimensionStyle dimStyle = MetrixUtilities.createMetrixRealDimension(); //sets the metrix real dimension
Point3d origin = new Point3d(0, 0, 0);
Point3d offset = new Point3d(0, 0, 0);
Point2d ext1;
Point2d ext2;
Point2d linePt;
LinearDimension dimension;
Guid dimGuid = new Guid();
double u, v;
// Create a new layer called DIMENSIONS BLACK
layerName = "DIMENSIONS BLACK";
layerIndex = createSubLayers.createSubLayer(layerName,
System.Drawing.Color.Black, parent_layer_Approval); //pass to the method, make Approval layer the parent layer
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
// Add the word perforated area to the panel
if (panel.DrawPerf != 3) //Add the text only if the panel is not a solid panel
{
//pt = new Rhino.Geometry.Point3d(((borderX1 + borderX0) / 2) - 117.5, ((borderY1 + borderY0) / 2) + 33, 0);
text = System.Text.RegularExpressions.Regex.Unescape(panel.PerfText);
height = panel.labelHeight / 2;
pt = new Rhino.Geometry.Point3d(((borderX1 + borderX0) / 2) - 117.5, ((borderY1 + borderY0) / 2) + 10 + height, 0);
plane.Origin = pt;
Guid perforatedAreaLabel = doc.Objects.AddText(text, plane, height, font, false, false);
guidList.Add(perforatedAreaLabel);
double ratio = 1;
if (panel.X - panel.LeftBorder - panel.RightBorder < 230)
{
RhinoApp.RunScript("SelNone", true);
labelText = doc.Objects.Find(perforatedAreaLabel);
labelText.Select(true);
bbox = labelText.Geometry.GetBoundingBox(true);
if (panel.Y > panel.X)
{
RhinoApp.RunScript("_-rotate " + bbox.Center.X + "," + bbox.Center.Y + " " + "90", true);
}
minX = bbox.Corner(true, true, true).X;
maxX = bbox.Corner(false, true, true).X;
minY = bbox.Corner(true, true, true).Y;
maxY = bbox.Corner(true, false, true).Y;
if (maxY - minY > panel.X - panel.LeftBorder - panel.RightBorder)
{
ratio = (panel.X - panel.LeftBorder - panel.RightBorder) / (2 * (maxY - minY));
if (ratio * (maxX - minX) > (panel.Y - panel.TopBorder - panel.BottomBorder))
{
ratio = ratio * (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * ratio * (maxX - minX));
}
}
else if (maxX - minX >= panel.Y - panel.TopBorder - panel.BottomBorder)
{
ratio = (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * (maxX - minX));
}
labelText.Select(true);
RhinoApp.RunScript("_-Scale " + bbox.Center.X + "," + bbox.Center.Y + " " + ratio, true);
BoundingBox bbox2 = labelText.Geometry.GetBoundingBox(true);
double distanceX = (borderX0 + borderX1) / 2;
double distanceY = (borderY0 + borderY1) / 2;
RhinoApp.WriteLine(bbox2.Center.ToString());
RhinoApp.RunScript("_-Move " + bbox2.Center.X + "," + bbox2.Center.Y + ",0 " + distanceX + "," + distanceY + ",0", true);
}
else
{
RhinoApp.RunScript("SelNone", true);
labelText = doc.Objects.Find(perforatedAreaLabel);
labelText.Select(true);
bbox = labelText.Geometry.GetBoundingBox(true);
minX = bbox.Corner(true, true, true).X;
maxX = bbox.Corner(false, true, true).X;
minY = bbox.Corner(true, true, true).Y;
maxY = bbox.Corner(true, false, true).Y;
if (maxX - minX > panel.Y - panel.TopBorder - panel.BottomBorder)
{
ratio = (panel.Y - panel.TopBorder - panel.BottomBorder) / (2 * (maxY - minY));
labelText.Select(true);
RhinoApp.RunScript("_-Scale " + bbox.Center.X + "," + bbox.Center.Y + " " + ratio, true);
}
BoundingBox bbox2 = labelText.Geometry.GetBoundingBox(true);
double distanceX = (borderX0 + borderX1) / 2;
double distanceY = (borderY0 + borderY1) / 2;
RhinoApp.WriteLine(bbox2.Center.ToString());
RhinoApp.RunScript("_-Move " + bbox2.Center.X + "," + bbox2.Center.Y + ",0 " + distanceX + "," + distanceY + ",0", true);
}
}
// Add horizontal dimension
origin = new Point3d(panelX1, panelY0 - 50, 0);
offset = new Point3d(panelX0, panelY0 - 50, 0);
pt = new Point3d((offset.X - origin.X) / 2, panelY0 - 100, 0);
plane = Plane.WorldXY;
plane.Origin = origin;
//double u, v;
plane.ClosestParameter(origin, out u, out v);
ext1 = new Point2d(u, v);
plane.ClosestParameter(offset, out u, out v);
ext2 = new Point2d(u, v);
plane.ClosestParameter(pt, out u, out v);
linePt = new Point2d(u, v);
dimension = new LinearDimension(plane, ext1, ext2, linePt);
dimGuid = doc.Objects.AddLinearDimension(dimension); //add the bottom dimension(vertical line)
guidList.Add(dimGuid);
// Add vertical dimension for panel
origin = new Point3d(panelX0 - 20, panelY0, 0);
offset = new Point3d(panelX0 - 20, panelY1, 0);
pt = new Point3d(panelX0 - 100, (offset.Y - origin.Y) / 2, 0);
plane = Plane.WorldXY;
plane.XAxis = new Vector3d(0, -1, 0);
plane.YAxis = new Vector3d(-1, 0, 0);
plane.ZAxis = new Vector3d(0, 0, -1);
plane.Origin = origin;
plane.ClosestParameter(origin, out u, out v);
ext1 = new Point2d(u, v);
plane.ClosestParameter(offset, out u, out v);
ext2 = new Point2d(u, v);
plane.ClosestParameter(pt, out u, out v);
linePt = new Point2d(u, v);
dimension = new LinearDimension(plane, ext1, ext2, linePt);
dimGuid = doc.Objects.AddLinearDimension(dimension); //adds the left dimension
guidList.Add(dimGuid);
MetrixUtilities.createMetrixBordersDimension(); //sets the dimension style for borders
// Draw Border dimension on BORDERS layer
if (panel.DrawPerf != 3) ///Add only if the panel is not a solid panel
{
layerName = "BORDERS";
layerIndex = doc.Layers.Find(layerName, true);
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
// Add horizontal borders dimension
origin = new Point3d(panelX1, (panelY0 + panelY1) / 2, 0);
offset = new Point3d(borderX1, (panelY0 + panelY1) / 2, 0);
pt = new Point3d((offset.X - origin.X) / 2, (borderY0 + borderY1) / 2, 0);
plane = Plane.WorldXY;
plane.Origin = origin;
plane.ClosestParameter(origin, out u, out v);
ext1 = new Point2d(u, v);
plane.ClosestParameter(offset, out u, out v);
ext2 = new Point2d(u, v);
plane.ClosestParameter(pt, out u, out v);
linePt = new Point2d(u, v);
dimension = new LinearDimension(plane, ext1, ext2, linePt);
dimGuid = doc.Objects.AddLinearDimension(dimension);
guidList.Add(dimGuid);
// Add horizontal borders dimension
origin = new Point3d(panelX0, (panelY0 + panelY1) / 2, 0);
offset = new Point3d(borderX0, (panelY0 + panelY1) / 2, 0);
pt = new Point3d((offset.X - origin.X) / 2, (borderY0 + borderY1) / 2, 0);
plane.ClosestParameter(origin, out u, out v);
ext1 = new Point2d(u, v);
plane.ClosestParameter(offset, out u, out v);
ext2 = new Point2d(u, v);
plane.ClosestParameter(pt, out u, out v);
linePt = new Point2d(u, v);
dimension = new LinearDimension(plane, ext1, ext2, linePt);
dimGuid = doc.Objects.AddLinearDimension(dimension);
guidList.Add(dimGuid);
// Add vertical border dimension for panel
origin = new Point3d((panelX0 + panelX1) / 2, panelY0, 0);
offset = new Point3d((panelX0 + panelX1) / 2, borderY0, 0);
pt = new Point3d((borderX0 + borderX1) / 2, (offset.Y - origin.Y) / 2, 0);
plane = Plane.WorldXY;
plane.XAxis = new Vector3d(0, -1, 0);
plane.YAxis = new Vector3d(-1, 0, 0);
plane.ZAxis = new Vector3d(0, 0, -1);
plane.Origin = origin;
plane.ClosestParameter(origin, out u, out v);
ext1 = new Point2d(u, v);
plane.ClosestParameter(offset, out u, out v);
ext2 = new Point2d(u, v);
plane.ClosestParameter(pt, out u, out v);
linePt = new Point2d(u, v);
dimension = new LinearDimension(plane, ext1, ext2, linePt);
dimGuid = doc.Objects.AddLinearDimension(dimension);
guidList.Add(dimGuid);
origin = new Point3d((panelX0 + panelX1) / 2, panelY1, 0);
offset = new Point3d((panelX0 + panelX1) / 2, borderY1, 0);
pt = new Point3d((borderX0 + borderX1) / 2, (offset.Y - origin.Y) / 2, 0);
plane.ClosestParameter(origin, out u, out v);
ext1 = new Point2d(u, v);
plane.ClosestParameter(offset, out u, out v);
ext2 = new Point2d(u, v);
plane.ClosestParameter(pt, out u, out v);
linePt = new Point2d(u, v);
dimension = new LinearDimension(plane, ext1, ext2, linePt);
dimGuid = doc.Objects.AddLinearDimension(dimension);
guidList.Add(dimGuid);
}
MetrixUtilities.createMetrixRealDimension(); //sets the default dimension style
layerName = "VIEWPORT";
layerIndex = createSubLayers.createSubLayer(layerName,
System.Drawing.Color.Black, parent_layer_Approval); //pass to the method, make Approval layer the parent layer
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
Rhino.DocObjects.RhinoObject label = doc.Objects.Find(panel.Label);
string exportFileName = "1";
if (label != null)
{
label.Select(true);
Rhino.Geometry.TextEntity textentity = label.Geometry as Rhino.Geometry.TextEntity;
exportFileName = textentity.Text + ".dxf";
}
/**
* Checks if the dxf files are required by the user, if yes check whether the panel is perforated
* using the drawPerf property in the panel. If it is a perforated panel then check if the directory
* for perforated panels dxf files already exists, if does not exist create directory and run command.
* If panel is not perforated, create directory to save not perforated panels dxf files if the directory
* does not exist. Then run the dxf file create command.
* */
if (panel.DXFFilesRequired.Equals("Yes"))
{
String path;
String immediateFolderName = Path.GetFileName(Path.GetDirectoryName(doc.Path)); //get the immediate foldername which the file is located in
//split the path to get the parent folder.
String[] newPath = MetrixUtilities.splitString(Path.GetDirectoryName(doc.Path), immediateFolderName);
if (panel.DrawPerf == 1) //checks if panel is perforated
{
path = newPath[0] + ("5TRUMPF") + ("\\WITH PERF"); //merge path for perforated files
if (!Directory.Exists(path)) //check if directory already exists
{
System.IO.Directory.CreateDirectory(path); //create directory if not exist
}
}
else
{
path = newPath[0] + ("5TRUMPF") + ("\\NO PERF"); //merge path for not perforated files
if (!Directory.Exists(path)) //check if directory already exists
{
System.IO.Directory.CreateDirectory(path); //create directory if not exist
}
}
string command = string.Format("-_Export \"" + path + @"\" + exportFileName + "\" Scheme \"R12 Lines & Arcs\" Enter");
// Export the selected curves
RhinoApp.RunScript(command, true);
}
// Unselect all objects
doc.Objects.UnselectAll();
// Default layer index
int defaultLayerIndex = doc.Layers.Find("Default", true);
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
////if draw perf is false, turnoff the toolhit layer
//if (Convert.ToBoolean(panel.DrawPerf) != true)
//{
// layerName = "Tool Hit";
// layerIndex = doc.Layers.Find(layerName, true);
// doc.Layers[layerIndex].IsVisible = false;
//}
MetrixUtilities.joinCurves(doc.Layers.Find("PANEL PERIMETER", true));
if (panel.FixingHoles == "1")
{
//if fixing holes are not manipulated, recalculate distances
if (!fixingHolesManipulated)
{
//panel = reCalculateDistances(panel);
//Below method is if fixing holes are automated
guidList = FixingHoles.drawFixingFoles(panel, null, false, 0, 0, panelY0, panelY1, dimStyle, guidList, panelX0, panelX1, 0, 0, 0, 0, 0); //add fixing holes
}
else
{
//Below method is if fixing holes have been manipulated
guidList = CustomFixingHoles.drawFixingFoles(panel, null, false, 0, 0, panelY0, panelY1, dimStyle, guidList, panelX0, panelX1, 0, 0, 0, 0, 0); //add fixing holes
}
}
layerName = "VIEWPORT";
layerIndex = createSubLayers.createSubLayer(layerName,
System.Drawing.Color.Black, parent_layer_Approval); //pass to the method, make Approval layer the parent layer
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
foreach (Guid g in guidList)
{
int idx = RhinoDoc.ActiveDoc.Groups.Find(panel.PartName, false);
if (idx < 0)
{
idx = RhinoDoc.ActiveDoc.Groups.Add(panel.PartName);
}
RhinoDoc.ActiveDoc.Groups.AddToGroup(idx, g);
}
//end
}
/// <summary>
/// Initializes a new instance of the <c>Leader</c> class.
/// </summary>
/// <param name="block">Leader block annotation.</param>
/// <param name="vertexes">List of leader vertexes in local coordinates.</param>
/// <param name="style">Leader style.</param>
public Leader(Block block, IEnumerable <Vector2> vertexes, DimensionStyle style)
: this(vertexes, style)
{
this.Annotation = this.BuildAnnotation(block);
}
/// <summary>
/// Initializes a new instance of the <c>DiametricDimension</c> class.
/// </summary>
/// <param name="centerPoint">Center <see cref="Vector2">point</see> of the circumference.</param>
/// <param name="referencePoint"><see cref="Vector2">Point</see> on circle or arc.</param>
/// <param name="offset">Distance between the reference point and the dimension text</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The center point and the definition point define the distance to be measure.</remarks>
public DiametricDimension(Vector2 centerPoint, Vector2 referencePoint, double offset, DimensionStyle style)
: base(DimensionType.Diameter)
{
this.center = centerPoint;
this.refPoint = referencePoint;
if (offset < 0.0)
{
throw new ArgumentOutOfRangeException(nameof(offset), "The offset value cannot be negative.");
}
this.offset = offset;
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
}
/// <summary>
/// Initializes a new instance of the <c>LinearDimension</c> class.
/// </summary>
/// <param name="referenceLine">Reference <see cref="Line">line</see> of the dimension.</param>
/// <param name="offset">Distance between the reference line and the dimension line.</param>
/// <param name="rotation">Rotation in degrees of the dimension line.</param>
/// <param name="normal">Normal vector of the plane where the dimension is defined.</param>
/// <param name="style">The <see cref="DimensionStyle">style</see> to use with the dimension.</param>
/// <remarks>The reference line define the distance to be measure.</remarks>
public LinearDimension(Line referenceLine, double offset, double rotation, Vector3 normal, DimensionStyle style)
: base(DimensionType.Linear)
{
if (referenceLine == null)
{
throw new ArgumentNullException(nameof(referenceLine));
}
Vector3 ocsPoint;
ocsPoint = MathHelper.Transform(referenceLine.StartPoint, normal, CoordinateSystem.World, CoordinateSystem.Object);
this.firstRefPoint = new Vector2(ocsPoint.X, ocsPoint.Y);
ocsPoint = MathHelper.Transform(referenceLine.EndPoint, normal, CoordinateSystem.World, CoordinateSystem.Object);
this.secondRefPoint = new Vector2(ocsPoint.X, ocsPoint.Y);
this.offset = offset;
this.rotation = MathHelper.NormalizeAngle(rotation);
if (style == null)
{
throw new ArgumentNullException(nameof(style));
}
this.Style = style;
this.Normal = normal;
this.Elevation = ocsPoint.Z;
}