private void SaveDetectcodes()
{
try
{
DataTable dt = this.dataGridView1.DataSource as DataTable;
foreach (DataRow dr in dt.Rows)
{
string codeIndex = dr["detectIndex"].ToString();
string code = dr["detectCode"].ToString();
if (string.IsNullOrWhiteSpace(codeIndex) || string.IsNullOrWhiteSpace(code))
{
continue;
}
DetectCodeDefModel m = new DetectCodeDefModel();
m.nodeName = this.toolStripComboBox1.Text;
m.detectIndex = int.Parse(dr["detectIndex"].ToString());
m.detectCode = dr["detectCode"].ToString();
m.detectItemName = dr["detectItemName"].ToString();
if (detectCodeBll.Exists(m.nodeName, m.detectIndex))
{
detectCodeBll.Update(m);
}
else
{
detectCodeBll.Add(m);
}
}
MessageBox.Show("保存成功！");
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
public override bool ExeBusiness(ref string reStr)
{
if (!NodeStatParse(ref reStr))
{
return(false);
}
if (!checkEnable)
{
return(true);
}
switch (currentTaskPhase)
{
//case 0:
// {
// db1ValsToSnd[0] = db1StatCheckNoneed; //空板进入，放行
// if (this.currentStat.Status != EnumNodeStatus.工位有板)
// {
// logRecorder.AddDebugLog(nodeName, "空板，放行");
// }
// this.currentStat.Status = EnumNodeStatus.工位有板;
// this.currentStat.ProductBarcode = "";
// this.currentStat.StatDescribe = "空板";
// break;
// }
case 1:
{
DevCmdReset();
rfidUID = string.Empty;
this.currentStat.Status = EnumNodeStatus.设备空闲;
this.currentStat.ProductBarcode = "";
this.currentStat.StatDescribe = "设备空闲";
checkFinished = false;
currentTaskDescribe = "等待有板信号";
break;
}
case 2:
{
db1ValsToSnd[32] = 1; //流程锁定
if (this.currentStat.Status == EnumNodeStatus.设备故障)
{
break;
}
// this.db1ValsToSnd[0] = (short)(this.db1ValsToSnd[0] | 64); //
this.currentStat.Status = EnumNodeStatus.设备使用中;
this.currentStat.ProductBarcode = "";
this.currentStat.StatDescribe = "设备使用中";
//开始读卡
DateTime dtSt = System.DateTime.Now;
if (!SimMode)
{
rfidUID = rfidRW.ReadUID();
}
else
{
rfidUID = SimRfidUID;
}
currentTaskDescribe = "开始读RFID";
if (!string.IsNullOrWhiteSpace(rfidUID))
{
db1ValsToSnd[0] = 0;
this.currentStat.StatDescribe = "RFID识别完成";
//根据绑定，查询条码，赋条码
OnlineProductsModel productBind = productBindBll.GetModelByrfid(rfidUID);
if (productBind == null)
{
// if (this.nodeName == "二次试火")
if (GetType().ToString() == "LineNodes.NodeFireTryingB")
{
db1ValsToSnd[0] |= db1StatNG; //
}
else
{
db1ValsToSnd[0] |= bindUnexist;
}
// this.currentTaskPhase = 4;
this.currentStat.StatDescribe = "未投产";
logRecorder.AddDebugLog(nodeName, "未投产，rfid:" + rfidUID);
checkEnable = false;
break;
}
productBind.currentNode = this.nodeName;
productBindBll.Update(productBind);
BarcodeFillDB1(productBind.productBarcode, 2);
int reDetectQuery = ReDetectQuery(productBind.productBarcode);
if (0 == reDetectQuery)
{
db1ValsToSnd[0] = db1StatCheckOK;
checkEnable = false;
logRecorder.AddDebugLog(nodeName, string.Format("{0}本地已经存在检验记录,检验结果：OK", productBind.productBarcode));
break;
}
else if (1 == reDetectQuery)
{
db1ValsToSnd[0] = db1StatNG;
checkEnable = false;
logRecorder.AddDebugLog(nodeName, string.Format("{0}本地已经存在检验记录,检验结果：NG", productBind.productBarcode));
break;
}
//状态赋条码,
this.currentStat.ProductBarcode = productBind.productBarcode;
logRecorder.AddDebugLog(this.nodeName, this.currentStat.ProductBarcode + "开始检测");
//查询本地数据库，之前工位是否有不合格项，若有，下线
// if (LineMonitorPresenter.checkPreStation)
{
if (!PreDetectCheck(productBind.productBarcode))
{
// if (this.nodeName == "二次试火")
if (GetType().ToString() == "LineNodes.NodeFireTryingB")
{
db1ValsToSnd[0] |= db1StatNG; //
}
else
{
db1ValsToSnd[0] |= preCheckLoss; //
}
logRecorder.AddDebugLog(this.nodeName, string.Format("{0} 在前面工位有检测NG项", productBind.productBarcode));
checkEnable = false;
break;
}
}
if (!LossCheck(productBind.productBarcode, ref reStr))
{
// if (this.nodeName == "二次试火")
if (GetType().ToString() == "LineNodes.NodeFireTryingB")
{
db1ValsToSnd[0] |= db1StatNG; //
}
else
{
db1ValsToSnd[0] |= preCheckLoss; //
}
logRecorder.AddDebugLog(this.nodeName, string.Format("{0} 检测漏项,{1}", productBind.productBarcode, reStr));
checkEnable = false;
break;
}
short gasSeq = 0;
if (productBind.productBarcode.Trim().Length == 26)
{
//新物料，直接查询产品配置
string cataCode = productBind.productBarcode.Substring(0, 13);
ProductSizeCfgModel m = productCfgBll.GetModel(cataCode);
if (m == null)
{
this.ThrowErrorStat(productBind.productBarcode + "产品型号配置不存在", EnumNodeStatus.设备故障);
//if (this.nodeName == "二次试火")
if (GetType().ToString() == "LineNodes.NodeFireTryingB")
{
db1ValsToSnd[0] |= db1StatNG; //
}
else
{
db1ValsToSnd[0] |= gasCfgUnexist;
}
checkEnable = false;
break;
}
GasConfigModel gasCfg = gasCfgBll.GetGascfgByName(m.gasName);
if (gasCfg == null)
{
this.ThrowErrorStat(productBind.productBarcode + "气源配置不存在", EnumNodeStatus.设备故障);
// if (this.nodeName == "二次试火")
if (GetType().ToString() == "LineNodes.NodeFireTryingB")
{
db1ValsToSnd[0] |= db1StatNG; //
}
else
{
db1ValsToSnd[0] |= gasCfgUnexist;
}
checkEnable = false;
break;
}
gasSeq = (short)gasCfg.gasSeq;
}
else
{
this.ThrowErrorStat(productBind.productBarcode + "无效的条码", EnumNodeStatus.设备故障);
db1ValsToSnd[0] |= db1StatNG; //
checkEnable = false;
break;
}
db1ValsToSnd[1] = gasSeq;
currentTaskPhase++;
}
else
{
if (!SysCfgModel.SimMode)
{
DateTime dtEnd = DateTime.Now;
string recvStr = (rfidRW as SgrfidRW).GetRecvBufStr();
string logStr = string.Format("读RFID失败，发送读卡命令:{0},接收判断时间:{1},接收数据:{2}", dtSt.ToString("HH:mm:ss"), dtEnd.ToString("HH:mm:ss"), recvStr);
logRecorder.AddDebugLog(nodeName, logStr);
}
if (db1ValsToSnd[0] != db1StatRfidFailed)
{
logRecorder.AddDebugLog(nodeName, "读RFID卡失败");
}
db1ValsToSnd[0] = db1StatRfidFailed;
this.currentStat.Status = EnumNodeStatus.无法识别;
this.currentStat.StatDescribe = "读RFID卡失败";
break;
}
break;
}
case 3:
{
currentTaskDescribe = "等待检测结果";
if (db2Vals[1] == 0)
{
break;
}
int checkRe = 0;
string detectCodes = "";
if (db2Vals[1] == 1)
{
checkRe = 0;
//合格
//db1ValsToSnd[0] = db1StatCheckOK;
}
else
{
checkRe = 1;
for (int i = 0; i < 16; i++)
{
int codeIndex = i + 1;
DetectCodeDefModel m = detectCodeDefbll.GetModel(this.processName, codeIndex);
if (m != null)
{
if ((db2Vals[2] & (1 << i)) > 0)
{
detectCodes += (m.detectCode + ",");
}
}
}
if (string.IsNullOrEmpty(detectCodes))
{
break;
}
else
{
if (detectCodes[detectCodes.Count() - 1] == ',')
{
detectCodes = detectCodes.Remove(detectCodes.Count() - 1, 1);
}
//不合格
// db1ValsToSnd[0] = db1StatNG;
logRecorder.AddDebugLog(this.nodeName, "故障码：" + detectCodes);
}
//检测不合格，下线
OutputRecord(this.currentStat.ProductBarcode);
}
currentTaskDescribe = "开始保存结果到本地";
if (!MesDatalocalSave(this.currentStat.ProductBarcode, checkRe, detectCodes, "", 0))
{
logRecorder.AddLog(new LogModel(this.nodeName, "保存检测数据到本地数据库失败", EnumLoglevel.警告));
break;
}
currentTaskDescribe = "开始上传结果到MES";
string[] mesProcessSeq = new string[] { "RQ-ZA230", "RQ-ZA240", "RQ-ZA220", "RQ-ZA250", "RQ-ZA251", "RQ-ZA252", "RQ-ZA254", "RQ-ZA260" };
// string[] mesProcessSeq = new string[] { this.mesNodeID };
if (!UploadMesdata(true, this.currentStat.ProductBarcode, mesProcessSeq, ref reStr))
{
this.currentStat.StatDescribe = "上传MES失败";
logRecorder.AddDebugLog(this.nodeName, this.currentStat.StatDescribe);
break;
}
this.currentStat.StatDescribe = "一次试火检测完成";
string checkReStr = "OK";
currentTaskDescribe = "放行";
if (0 == checkRe)
{
db1ValsToSnd[0] = db1StatCheckOK;
}
else
{
db1ValsToSnd[0] = db1StatNG;
checkReStr = "NG";
}
logRecorder.AddDebugLog(this.nodeName, this.currentStat.ProductBarcode + "检测完成," + checkReStr);
checkFinished = true;
currentTaskPhase++;
break;
}
case 4:
{
//流程结束
currentTaskDescribe = "流程结束";
this.currentStat.StatDescribe = "流程完成";
// DevCmdReset();
this.currentTaskPhase++;
break;
}
case 5:
{
this.currentTaskPhase++;
break;
}
default:
break;
}
return(true);
}
public override bool ExeBusiness(ref string reStr)
{
MessLossCheck();
if (!NodeStatParse(ref reStr))
{
return(false);
}
////临时测试
//if (PLProcessModel.SysCfgModel.PrienterEnable)
//{
// string testBarcode = System.Guid.NewGuid().ToString();
// SendPrinterinfo(testBarcode);//异步发送
//}
////临时
if (!checkEnable)
{
return(true);
}
switch (currentTaskPhase)
{
//case 0:
// {
// db1ValsToSnd[0] = db1StatCheckNoneed; //空板进入，放行
// if (this.currentStat.Status != EnumNodeStatus.工位有板)
// {
// logRecorder.AddDebugLog(nodeName, "空板，放行");
// }
// this.currentStat.Status = EnumNodeStatus.工位有板;
// this.currentStat.ProductBarcode = "";
// this.currentStat.StatDescribe = "空板";
// rfidTimeCounterBegin = false;
// break;
// }
case 1:
{
DevCmdReset();
rfidUID = string.Empty;
this.currentStat.Status = EnumNodeStatus.设备空闲;
this.currentStat.ProductBarcode = "";
this.currentStat.StatDescribe = "设备空闲";
checkRe = 0;
checkFinished = false;
currentTaskDescribe = "等待有板信号";
rfidTimeCounterBegin = false;
break;
}
case 2:
{
db1ValsToSnd[31] = 1; //流程锁定
if (this.currentStat.Status == EnumNodeStatus.设备故障)
{
break;
}
this.currentStat.Status = EnumNodeStatus.设备使用中;
this.currentStat.ProductBarcode = "";
this.currentStat.StatDescribe = "设备使用中";
//开始读卡
DateTime dtSt = System.DateTime.Now;
if (!SimMode)
{
rfidUID = rfidRW.ReadUID();
}
else
{
rfidUID = SimRfidUID;
}
currentTaskDescribe = "开始读RFID";
if (!string.IsNullOrWhiteSpace(rfidUID))
{
db1ValsToSnd[0] = 0;
this.currentStat.StatDescribe = "RFID识别完成";
//根据绑定，查询条码，赋条码
OnlineProductsModel productBind = productBindBll.GetModelByrfid(rfidUID);
if (productBind == null)
{
db1ValsToSnd[0] = db1StatNG;
// this.currentTaskPhase = 5;
this.currentStat.StatDescribe = "未投产";
logRecorder.AddDebugLog(nodeName, "未投产，rfid:" + rfidUID);
checkEnable = false;
break;
}
productBind.currentNode = this.nodeName;
productBindBll.Update(productBind);
BarcodeFillDB1(productBind.productBarcode, 1);
int reDetectQuery = ReDetectQuery(productBind.productBarcode);
if (0 == reDetectQuery)
{
db1ValsToSnd[0] = db1StatCheckOK;
checkEnable = false;
logRecorder.AddDebugLog(nodeName, string.Format("{0}本地已经存在检验记录,检验结果：OK", productBind.productBarcode));
break;
}
else if (1 == reDetectQuery)
{
db1ValsToSnd[0] = db1StatNG;
checkEnable = false;
logRecorder.AddDebugLog(nodeName, string.Format("{0}本地已经存在检验记录,检验结果：NG", productBind.productBarcode));
break;
}
//reDetectQuery=2,无记录，继续后面的流程
//状态赋条码,
this.currentStat.ProductBarcode = productBind.productBarcode;
logRecorder.AddDebugLog(this.nodeName, this.currentStat.ProductBarcode + "开始检测");
//查询本地数据库，之前工位是否有不合格项，若有，下线
if (!PreDetectCheck(productBind.productBarcode))
{
db1ValsToSnd[0] = 32; //
logRecorder.AddDebugLog(this.nodeName, string.Format("{0} 在前面工位有检测NG项", productBind.productBarcode));
checkEnable = false;
break;
}
if (!LossCheck(productBind.productBarcode, ref reStr))
{
db1ValsToSnd[0] = 32; //
logRecorder.AddDebugLog(this.nodeName, string.Format("{0} 检测漏项,{1}", productBind.productBarcode, reStr));
checkEnable = false;
break;
}
currentTaskPhase++;
}
else
{
if (!SysCfgModel.SimMode)
{
DateTime dtEnd = DateTime.Now;
string recvStr = (rfidRW as SgrfidRW).GetRecvBufStr();
string logStr = string.Format("读RFID失败，发送读卡命令:{0},接收判断时间:{1},接收数据:{2}", dtSt.ToString("HH:mm:ss"), dtEnd.ToString("HH:mm:ss"), recvStr);
logRecorder.AddDebugLog(nodeName, logStr);
}
if (!rfidTimeCounterBegin)
{
//logRecorder.AddDebugLog(nodeName, "读RFID卡失败");
rfidFailSt = System.DateTime.Now;
}
rfidTimeCounterBegin = true;
TimeSpan ts = System.DateTime.Now - rfidFailSt;
if (ts.TotalSeconds > SysCfgModel.RfidDelayTimeout)
{
if (db1ValsToSnd[0] != db1StatRfidFailed)
{
logRecorder.AddDebugLog(nodeName, "读RFID卡失败");
}
db1ValsToSnd[0] = db1StatRfidFailed;
}
this.currentStat.Status = EnumNodeStatus.无法识别;
this.currentStat.StatDescribe = "读RFID卡失败";
break;
}
break;
}
case 3:
{
currentTaskDescribe = "等待检测结果";
if (db2Vals[1] == 0)
{
break;
}
string detectCodes = "";
if (db2Vals[1] == 1)
{
//合格
checkRe = 0;
}
else
{
checkRe = 1;
for (int i = 0; i < 16; i++)
{
int codeIndex = i + 1;
DetectCodeDefModel m = detectCodeDefbll.GetModel(this.processName, codeIndex);
if (m != null)
{
if ((db2Vals[2] & (1 << i)) > 0)
{
detectCodes += (m.detectCode + ",");
}
}
}
if (string.IsNullOrEmpty(detectCodes))
{
break;
}
else
{
if (detectCodes[detectCodes.Count() - 1] == ',')
{
detectCodes = detectCodes.Remove(detectCodes.Count() - 1, 1);
}
//不合格
logRecorder.AddDebugLog(this.nodeName, this.currentStat.ProductBarcode + ",故障码：" + detectCodes);
OutputRecord(this.currentStat.ProductBarcode);
// break;
}
}
currentTaskDescribe = "开始保存结果到本地";
if (!MesDatalocalSave(this.currentStat.ProductBarcode, checkRe, detectCodes, "", 0))
{
logRecorder.AddLog(new LogModel(this.nodeName, "保存检测数据到本地数据库失败", EnumLoglevel.警告));
break;
}
string[] mesProcessSeq = new string[] { "RQ-ZA230", "RQ-ZA240", "RQ-ZA220", "RQ-ZA250", "RQ-ZA251", "RQ-ZA252", "RQ-ZA254", "RQ-ZA260", "RQ-ZA270" };
// string[] mesProcessSeq = new string[] { this.mesNodeID };
currentTaskDescribe = "开始上传结果到MES";
if (!UploadMesdata(true, this.currentStat.ProductBarcode, mesProcessSeq, ref reStr))
{
this.currentStat.StatDescribe = "上传MES失败";
logRecorder.AddDebugLog(this.nodeName, this.currentStat.StatDescribe);
break;
}
currentTaskPhase++;
break;
}
case 4:
{
currentTaskDescribe = "放行";
this.currentStat.StatDescribe = "外观检测完成";
string checkreStr = "OK";
if (checkRe == 1)
{
checkreStr = "NG";
db1ValsToSnd[0] = db1StatNG;
}
else
{
db1ValsToSnd[0] = db1StatCheckOK; //允许下线
db1ValsToSnd[32] = 3; //两个放行信号
if (PLProcessModel.SysCfgModel.PrienterEnable)
{
SendPrinterinfo(this.currentStat.ProductBarcode); //异步发送
}
}
logRecorder.AddDebugLog(this.nodeName, this.currentStat.ProductBarcode + "检测完成," + checkreStr);
this.currentStat.StatDescribe = "下线";
checkFinished = true;
currentTaskPhase++;
break;
}
case 5:
{
this.currentStat.StatDescribe = "流程完成";
currentTaskDescribe = "流程结束";
//DevCmdReset();
//checkFinished = true;
break;
}
default:
break;
}
return(true);
}
