public void WaitOne_TakesCertainTime(DelayProvider.DelayStrategy strategy)
{
using (var delay = new DelayProvider(strategy))
{
var time = delay.WaitOne();
var mil = time.Milliseconds;
Assert.GreaterOrEqual(mil, 1, $"Strategy {strategy}");
}
}
private bool DelayDecoder(DelayProvider delay, int decodedFrameCount)
{
// We don't delay if there was output or there is a command
// or a stop operation pending
if (decodedFrameCount > 0 || Commands.IsStopWorkersPending || Commands.HasQueuedCommands)
{
return(false);
}
// Introduce a delay if the conditions above were not satisfied
delay.WaitOne();
return(true);
}
/// <summary>
/// Continually decodes the available packet buffer to have as
/// many frames as possible in each frame queue and
/// up to the MaxFrames on each component
/// </summary>
internal void RunFrameDecodingWorker()
{
#region Worker State Setup
// The delay provider prevents 100% core usage
var delay = new DelayProvider();
// State variables
var decodedFrameCount = 0;
var wallClock = TimeSpan.Zero;
var rangePercent = 0d;
var isInRange = false;
var playAfterSeek = false;
// Holds the main media type
var main = Container.Components.Main.MediaType;
// Holds the auxiliary media types
var auxs = Container.Components.MediaTypes.ExcludeMediaType(main);
// Holds all components
var all = Container.Components.MediaTypes.DeepCopy();
var isBuffering = false;
var resumeClock = false;
var hasPendingSeeks = false;
MediaComponent comp = null;
MediaBlockBuffer blocks = null;
#endregion
#region Worker Loop
try
{
while (IsTaskCancellationPending == false)
{
#region 1. Setup the Decoding Cycle
// Singal a Seek starting operation
hasPendingSeeks = Commands.PendingCountOf(MediaCommandType.Seek) > 0;
if (State.IsSeeking == false && hasPendingSeeks)
{
playAfterSeek = State.IsPlaying;
State.IsSeeking = true;
SendOnSeekingStarted();
}
// Execute the following command at the beginning of the cycle
Commands.ProcessNext();
// Wait for a seek operation to complete (if any)
// and initiate a frame decoding cycle.
SeekingDone.Wait();
// Set initial state
wallClock = WallClock;
decodedFrameCount = 0;
// Signal a Seek ending operation
// TOD: Maybe this should go on the block rendering worker?
hasPendingSeeks = Commands.PendingCountOf(MediaCommandType.Seek) > 0;
if (State.IsSeeking && hasPendingSeeks == false)
{
// Detect a end of seek cycle and update to the final position
wallClock = SnapToFramePosition(WallClock);
Clock.Update(wallClock);
State.UpdatePosition(wallClock);
// Call the seek method on all renderers
foreach (var kvp in Renderers)
{
LastRenderTime[kvp.Key] = TimeSpan.MinValue;
kvp.Value.Seek();
}
SendOnSeekingEnded();
State.IsSeeking = false;
if (playAfterSeek)
{
Clock.Play();
State.UpdateMediaState(PlaybackStatus.Play);
}
else
{
State.UpdateMediaState(PlaybackStatus.Pause);
}
}
else if (State.IsSeeking == false)
{
// Notify position changes
State.UpdatePosition(wallClock);
}
// Initiate the frame docding cycle
FrameDecodingCycle.Begin();
#endregion
#region 2. Main Component Decoding
// Capture component and blocks for easier readability
comp = Container.Components[main];
blocks = Blocks[main];
// Handle the main component decoding; Start by checking we have some packets
while (comp.PacketBufferCount <= 0 && CanReadMorePackets && ShouldReadMorePackets)
{
PacketReadingCycle.Wait(Constants.Interval.LowPriority);
}
if (comp.PacketBufferCount > 0)
{
// Detect if we are in range for the main component
isInRange = blocks.IsInRange(wallClock);
if (isInRange == false)
{
// Signal the start of a sync-buffering scenario
HasDecoderSeeked = true;
isBuffering = true;
resumeClock = Clock.IsRunning;
Clock.Pause();
Log(MediaLogMessageType.Debug, $"SYNC-BUFFER: Started.");
// Read some frames and try to get a valid range
do
{
// Try to get more packets by waiting for read cycles.
if (CanReadMorePackets && comp.PacketBufferCount <= 0)
{
PacketReadingCycle.Wait();
}
// Decode some frames and check if we are in reange now
decodedFrameCount += AddBlocks(main);
isInRange = blocks.IsInRange(wallClock);
// Break the cycle if we are in range
if (isInRange || CanReadMorePackets == false)
{
break;
}
}while (decodedFrameCount <= 0 && blocks.IsFull == false);
// Unfortunately at this point we will need to adjust the clock after creating the frames.
// to ensure tha mian component is within the clock range if the decoded
// frames are not with range. This is normal while buffering though.
if (isInRange == false)
{
// Update the wall clock to the most appropriate available block.
if (blocks.Count > 0)
{
wallClock = blocks[wallClock].StartTime;
}
else
{
resumeClock = false; // Hard stop the clock.
}
// Update the clock to what the main component range mandates
Clock.Update(wallClock);
// Call seek to invalidate renderer
LastRenderTime[main] = TimeSpan.MinValue;
Renderers[main].Seek();
// Try to recover the regular loop
isInRange = true;
while (CanReadMorePackets && comp.PacketBufferCount <= 0)
{
PacketReadingCycle.Wait();
}
}
}
if (isInRange)
{
// Check if we need more blocks for the current components
rangePercent = blocks.GetRangePercent(wallClock);
// Read as much as we can for this cycle.
while (comp.PacketBufferCount > 0)
{
rangePercent = blocks.GetRangePercent(wallClock);
if (blocks.IsFull == false || (blocks.IsFull && rangePercent > 0.75d && rangePercent < 1d))
{
decodedFrameCount += AddBlocks(main);
}
else
{
break;
}
}
}
}
#endregion
#region 3. Auxiliary Component Decoding
foreach (var t in auxs)
{
if (State.IsSeeking)
{
continue;
}
// Capture the current block buffer and component
// for easier readability
comp = Container.Components[t];
blocks = Blocks[t];
isInRange = blocks.IsInRange(wallClock);
// Invalidate the renderer if we don't have the block.
if (isInRange == false)
{
LastRenderTime[t] = TimeSpan.MinValue;
Renderers[t].Seek();
}
// wait for component to get there if we only have furutre blocks
// in auxiliary component.
if (blocks.Count > 0 && blocks.RangeStartTime > wallClock)
{
continue;
}
// Try to catch up with the wall clock
while (blocks.Count == 0 || blocks.RangeEndTime <= wallClock)
{
// Wait for packets if we don't have enough packets
if (CanReadMorePackets && comp.PacketBufferCount <= 0)
{
PacketReadingCycle.Wait();
}
if (comp.PacketBufferCount <= 0)
{
break;
}
else
{
decodedFrameCount += AddBlocks(t);
}
}
isInRange = blocks.IsInRange(wallClock);
// Move to the next component if we don't meet a regular conditions
if (isInRange == false || isBuffering || comp.PacketBufferCount <= 0)
{
continue;
}
// Read as much as we can for this cycle.
while (comp.PacketBufferCount > 0)
{
rangePercent = blocks.GetRangePercent(wallClock);
if (blocks.IsFull == false || (blocks.IsFull && rangePercent > 0.75d && rangePercent < 1d))
{
decodedFrameCount += AddBlocks(t);
}
else
{
break;
}
}
}
#endregion
#region 4. Detect End of Media
// Detect end of block rendering
// TODO: Maybe this detection should be performed on the BlockRendering worker?
if (isBuffering == false &&
State.IsSeeking == false &&
CanReadMoreFramesOf(main) == false &&
Blocks[main].IndexOf(wallClock) == Blocks[main].Count - 1)
{
if (State.HasMediaEnded == false)
{
// Rendered all and nothing else to read
Clock.Pause();
if (State.NaturalDuration != null && State.NaturalDuration != TimeSpan.MinValue)
{
wallClock = State.NaturalDuration.Value;
}
else
{
wallClock = Blocks[main].RangeEndTime;
}
Clock.Update(wallClock);
State.HasMediaEnded = true;
State.UpdateMediaState(PlaybackStatus.Stop, wallClock);
SendOnMediaEnded();
}
}
else
{
State.HasMediaEnded = false;
}
#endregion
#region 6. Finish the Cycle
// complete buffering notifications
if (isBuffering)
{
// Reset the buffering flag
isBuffering = false;
// Resume the clock if it was playing
if (resumeClock)
{
Clock.Play();
}
// log some message
Log(
MediaLogMessageType.Debug,
$"SYNC-BUFFER: Finished. Clock set to {wallClock.Format()}");
}
// Complete the frame decoding cycle
FrameDecodingCycle.Complete();
// After a seek operation, always reset the has seeked flag.
HasDecoderSeeked = false;
// If not already set, guess the 1-second buffer length
State.GuessBufferingProperties();
// Give it a break if there was nothing to decode.
// We probably need to wait for some more input
if (decodedFrameCount <= 0 && Commands.PendingCount <= 0)
{
delay.WaitOne();
}
#endregion
}
}
catch (ThreadAbortException) { /* swallow */ }
catch { if (!IsDisposed)
{
throw;
}
}
finally
{
// Always exit notifying the cycle is done.
FrameDecodingCycle.Complete();
delay.Dispose();
}
#endregion
}
/// <summary>
/// Runs the read task which keeps a packet buffer as full as possible.
/// It reports on DownloadProgress by enqueueing an update to the property
/// in order to avoid any kind of disruption to this thread caused by the UI thread.
/// </summary>
internal void RunPacketReadingWorker()
{
#region Worker State Setup
// The delay provider prevents 100% core usage
var delay = new DelayProvider();
// Holds the packet count for each read cycle
var packetsRead = new MediaTypeDictionary <int>();
// State variables for media types
var t = MediaType.None;
// Store Container in local variable to prevent NullReferenceException
// when dispose occurs sametime with read cycle
var mediaContainer = Container;
#endregion
#region Worker Loop
try
{
// Worker logic begins here
while (IsTaskCancellationPending == false)
{
// Wait for seeking or changing to be done.
MediaChangingDone.Wait();
SeekingDone.Wait();
// Enter a packet reading cycle
PacketReadingCycle.Begin();
// Initialize Packets read to 0 for each component and state variables
foreach (var k in mediaContainer.Components.MediaTypes)
{
packetsRead[k] = 0;
}
// Start to perform the read loop
// NOTE: Disrupting the packet reader causes errors in UPD streams. Disrupt as little as possible
while (CanReadMorePackets && ShouldReadMorePackets && IsTaskCancellationPending == false)
{
// Perform a packet read. t will hold the packet type.
try
{
t = mediaContainer.Read();
}
catch (MediaContainerException)
{
continue;
}
// Discard packets that we don't need (i.e. MediaType == None)
if (mediaContainer.Components.MediaTypes.HasMediaType(t) == false)
{
continue;
}
// Update the packet count for the components
packetsRead[t] += 1;
// Ensure we have read at least some packets from main and auxiliary streams.
if (packetsRead.FundamentalsGreaterThan(0))
{
break;
}
}
// finish the reading cycle.
PacketReadingCycle.Complete();
// Don't evaluate a pause condition if we are seeking
if (SeekingDone.IsInProgress)
{
continue;
}
// Wait some if we have a full packet buffer or we are unable to read more packets (i.e. EOF).
if (ShouldReadMorePackets == false ||
CanReadMorePackets == false ||
packetsRead.GetSum() <= 0)
{
delay.WaitOne();
}
}
}
catch (ThreadAbortException) { /* swallow */ }
catch { if (!IsDisposed)
{
throw;
}
}
finally
{
// Always exit notifying the reading cycle is done.
PacketReadingCycle.Complete();
delay.Dispose();
}
#endregion
}
/// <summary>
/// Continually decodes the available packet buffer to have as
/// many frames as possible in each frame queue and
/// up to the MaxFrames on each component
/// </summary>
internal void RunFrameDecodingWorker()
{
// TODO: Don't use State properties in workers as they are only for
// TODO: Check the use of wall clock. Maybe it's be more consistent
// to use a single atomic wallclock value per cycle. Check other workers as well.
// state notification purposes.
// State variables
var wasSyncBuffering = false;
var delay = new DelayProvider(); // The delay provider prevents 100% core usage
var decodedFrameCount = 0;
var rangePercent = 0d;
var main = Container.Components.MainMediaType; // Holds the main media type
var resumeSyncBufferingClock = false;
MediaBlockBuffer blocks = null;
try
{
while (Commands.IsStopWorkersPending == false)
{
#region Setup the Decoding Cycle
// Determine what to do on a priority command
if (Commands.IsExecutingDirectCommand)
{
if (Commands.IsClosing)
{
break;
}
if (Commands.IsChanging)
{
Commands.WaitForDirectCommand();
}
}
// Execute the following command at the beginning of the cycle
if (IsSyncBuffering == false)
{
Commands.ExecuteNextQueuedCommand();
}
// Signal a Seek starting operation and set the initial state
FrameDecodingCycle.Begin();
// Update state properties -- this must be after processing commanmds as
// a direct command might have changed the components
main = Container.Components.MainMediaType;
decodedFrameCount = 0;
#endregion
// The 2-part logic blocks detect a sync-buffering scenario
// and then decodes the necessary frames.
if (State.HasMediaEnded == false && IsWorkerInterruptRequested == false)
{
#region Sync-Buffering
// Capture the blocks for easier readability
blocks = Blocks[main];
// If we are not then we need to begin sync-buffering
if (wasSyncBuffering == false && blocks.IsInRange(WallClock) == false)
{
// Signal the start of a sync-buffering scenario
IsSyncBuffering = true;
wasSyncBuffering = true;
resumeSyncBufferingClock = Clock.IsRunning;
Clock.Pause();
State.UpdateMediaState(PlaybackStatus.Manual);
Log(MediaLogMessageType.Debug, $"SYNC-BUFFER: Started.");
}
#endregion
#region Component Decoding
// We need to add blocks if the wall clock is over 75%
// for each of the components so that we have some buffer.
foreach (var t in Container.Components.MediaTypes)
{
if (IsWorkerInterruptRequested)
{
break;
}
// Capture a reference to the blocks and the current Range Percent
const double rangePercentThreshold = 0.75d;
blocks = Blocks[t];
rangePercent = blocks.GetRangePercent(WallClock);
// Read as much as we can for this cycle but always within range.
while (blocks.IsFull == false || rangePercent > rangePercentThreshold)
{
// Stop decoding under sync-buffering conditions
if (IsSyncBuffering && blocks.IsFull)
{
break;
}
if (IsWorkerInterruptRequested || AddNextBlock(t) == false)
{
break;
}
decodedFrameCount += 1;
rangePercent = blocks.GetRangePercent(WallClock);
// Determine break conditions to save CPU time
if (IsSyncBuffering == false &&
rangePercent > 0 &&
rangePercent <= rangePercentThreshold &&
blocks.IsFull == false &&
blocks.CapacityPercent >= 0.25d &&
blocks.IsInRange(WallClock))
{
break;
}
}
}
// Give it a break if we are still buffering packets
if (IsSyncBuffering)
{
delay.WaitOne();
FrameDecodingCycle.Complete();
continue;
}
#endregion
}
#region Finish the Cycle
// Detect End of Media Scenarios
DetectEndOfMedia(decodedFrameCount, main);
// Resume sync-buffering clock
if (wasSyncBuffering && IsSyncBuffering == false)
{
// Sync-buffering blocks
blocks = Blocks[main];
// Unfortunately at this point we will need to adjust the clock after creating the frames.
// to ensure tha mian component is within the clock range if the decoded
// frames are not with range. This is normal while buffering though.
if (blocks.IsInRange(WallClock) == false)
{
// Update the wall clock to the most appropriate available block.
if (blocks.Count > 0)
{
ChangePosition(blocks[WallClock].StartTime);
}
else
{
resumeSyncBufferingClock = false; // Hard stop the clock.
}
}
// log some message and resume the clock if it was playing
Log(MediaLogMessageType.Debug, $"SYNC-BUFFER: Finished. Clock set to {WallClock.Format()}");
if (resumeSyncBufferingClock && State.HasMediaEnded == false)
{
ResumePlayback();
}
wasSyncBuffering = false;
resumeSyncBufferingClock = false;
}
// Provide updates to decoding stats
State.UpdateDecodingBitrate(
Blocks.Values.Sum(b => b.IsInRange(WallClock) ? b.RangeBitrate : 0));
// Complete the frame decoding cycle
FrameDecodingCycle.Complete();
// Give it a break if there was nothing to decode.
DelayDecoder(delay, decodedFrameCount);
#endregion
}
}
catch { throw; }
finally
{
// Reset decoding stats
State.UpdateDecodingBitrate(0);
// Always exit notifying the cycle is done.
FrameDecodingCycle.Complete();
delay.Dispose();
}
}
/// <summary>
/// Continually decodes the available packet buffer to have as
/// many frames as possible in each frame queue and
/// up to the MaxFrames on each component
/// </summary>
internal void RunFrameDecodingWorker()
{
#region Worker State Setup
// The delay provider prevents 100% core usage
var delay = new DelayProvider();
// State variables
var decodedFrameCount = 0;
var wallClock = TimeSpan.Zero;
var rangePercent = 0d;
var isInRange = false;
// Holds the main media type
var main = Container.Components.Main.MediaType;
// Holds the auxiliary media types
var auxs = Container.Components.MediaTypes.Except(main);
// State properties
var isBuffering = false;
var resumeClock = false;
MediaComponent comp = null;
MediaBlockBuffer blocks = null;
#endregion
#region Worker Loop
try
{
while (Commands.IsStopWorkersPending == false)
{
#region 1. Setup the Decoding Cycle
// Determine what to do on a priority command
if (Commands.IsExecutingDirectCommand)
{
if (Commands.IsClosing)
{
break;
}
if (Commands.IsChanging)
{
Commands.WaitForDirectCommand();
}
}
// Update state properties -- this must be after processing commanmds as
// a direct command might have changed the components
main = Container.Components.Main.MediaType;
auxs = Container.Components.MediaTypes.Except(main);
// Execute the following command at the beginning of the cycle
Commands.ExecuteNextQueuedCommand();
// Signal a Seek starting operation
FrameDecodingCycle.Begin();
// Set initial state
wallClock = WallClock;
decodedFrameCount = 0;
#endregion
if (State.HasMediaEnded == false)
{
#region 2. Main Component Decoding
// Capture component and blocks for easier readability
// comp is current component, blocks is the block collection for the component
comp = Container.Components[main];
blocks = Blocks[main];
// Detect if we are in range for the main component
isInRange = blocks.IsInRange(wallClock);
if (isInRange == false)
{
// Signal the start of a sync-buffering scenario
isBuffering = true;
State.SignalBufferingStarted();
resumeClock = Clock.IsRunning;
Clock.Pause();
Log(MediaLogMessageType.Debug, $"SYNC-BUFFER: Started.");
// Read some frames and try to get a valid range
do
{
// Try to get more packets by waiting for read cycles.
WaitForPackets(comp, 1);
// Decode some frames and check if we are in reange now
if (AddNextBlock(main) == false)
{
break;
}
decodedFrameCount += 1;
isInRange = blocks.IsInRange(wallClock);
// Break the cycle if we are in range
if (isInRange || CanReadMorePackets == false || ShouldReadMorePackets == false)
{
break;
}
}while (blocks.IsFull == false);
// Unfortunately at this point we will need to adjust the clock after creating the frames.
// to ensure tha mian component is within the clock range if the decoded
// frames are not with range. This is normal while buffering though.
if (isInRange == false)
{
// Update the wall clock to the most appropriate available block.
if (blocks.Count > 0)
{
wallClock = blocks[wallClock].StartTime;
}
else
{
resumeClock = false; // Hard stop the clock.
}
// Update the clock to what the main component range mandates
Clock.Update(wallClock);
// Force renderer invalidation
InvalidateRenderer(main);
// Try to recover the regular loop
isInRange = true;
}
}
if (isInRange)
{
// Check if we need more blocks for the current components
rangePercent = blocks.GetRangePercent(wallClock);
// Read as much as we can for this cycle but always within range.
while (blocks.IsFull == false || (blocks.IsFull && rangePercent > 0.75d && rangePercent < 1d))
{
if (AddNextBlock(main) == false)
{
break;
}
decodedFrameCount += 1;
rangePercent = blocks.GetRangePercent(wallClock);
continue;
}
}
#endregion
#region 3. Auxiliary Component Decoding
foreach (var t in auxs)
{
if (State.IsSeeking)
{
continue;
}
// Capture the current block buffer and component
// for easier readability
comp = Container.Components[t];
blocks = Blocks[t];
isInRange = blocks.IsInRange(wallClock);
// wait for component to get there if we only have furutre blocks
// in auxiliary component.
if (blocks.Count > 0 && blocks.RangeStartTime > wallClock)
{
continue;
}
// We need the other components to catch up with the main
while (blocks.Count == 0 || blocks.RangeEndTime <= wallClock ||
(Blocks[main].Count > 0 && blocks.RangeEndTime < Blocks[main].RangeEndTime))
{
// give up if we never received frames for the expected component
if (AddNextBlock(t) == false)
{
break;
}
}
// Check if we are finally within range
isInRange = blocks.IsInRange(wallClock);
// Invalidate the renderer if we don't have the block.
if (isInRange == false)
{
InvalidateRenderer(t);
}
// Move to the next component if we don't meet a regular conditions
if (isInRange == false || isBuffering)
{
continue;
}
// Decode as much as we can off the packet buffer for this cycle.
rangePercent = blocks.GetRangePercent(wallClock);
while (blocks.IsFull == false || (blocks.IsFull && rangePercent > 0.75d && rangePercent < 1d))
{
if (AddNextBlock(t) == false)
{
break;
}
rangePercent = blocks.GetRangePercent(wallClock);
}
}
#endregion
}
#region 4. Detect End of Media
// Detect end of block rendering
// TODO: Maybe this detection should be performed on the BlockRendering worker?
if (isBuffering == false &&
decodedFrameCount <= 0 &&
State.IsSeeking == false &&
CanReadMoreFramesOf(main) == false &&
Blocks[main].IndexOf(wallClock) == Blocks[main].Count - 1)
{
if (State.HasMediaEnded == false)
{
// Rendered all and nothing else to read
Clock.Pause();
wallClock = Blocks[main].RangeEndTime;
Clock.Update(wallClock);
if (State.NaturalDuration != null &&
State.NaturalDuration != TimeSpan.MinValue &&
State.NaturalDuration < wallClock)
{
Log(MediaLogMessageType.Warning,
$"{nameof(State.HasMediaEnded)} conditions met at {wallClock.Format()} but " +
$"{nameof(State.NaturalDuration)} reports {State.NaturalDuration.Value.Format()}");
}
State.UpdateMediaEnded(true);
State.UpdateMediaState(PlaybackStatus.Stop, wallClock);
SendOnMediaEnded();
}
}
else
{
State.UpdateMediaEnded(false);
}
#endregion
#region 6. Finish the Cycle
// complete buffering notifications
if (isBuffering)
{
// Always reset the buffering flag
isBuffering = false;
// Resume the clock if it was playing
if (resumeClock)
{
Clock.Play();
}
// log some message
Log(MediaLogMessageType.Debug, $"SYNC-BUFFER: Finished. Clock set to {wallClock.Format()}");
}
// If not already set, guess the 1-second buffer length
State.GuessBufferingProperties();
// Complete the frame decoding cycle
FrameDecodingCycle.Complete();
// Give it a break if there was nothing to decode.
// We probably need to wait for some more input
if (Commands.IsStopWorkersPending == false &&
decodedFrameCount <= 0 &&
Commands.HasQueuedCommands == false)
{
delay.WaitOne();
}
#endregion
}
}
catch { throw; }
finally
{
// Always exit notifying the cycle is done.
FrameDecodingCycle.Complete();
delay.Dispose();
}
#endregion
}
/// <summary>
/// Runs the read task which keeps a packet buffer as full as possible.
/// It reports on DownloadProgress by enqueueing an update to the property
/// in order to avoid any kind of disruption to this thread caused by the UI thread.
/// </summary>
internal void RunPacketReadingWorker()
{
#region Worker State Setup
// The delay provider prevents 100% core usage
var delay = new DelayProvider();
// Holds the packet count for each read cycle
var packetsRead = new MediaTypeDictionary <int>();
// State variables for media types
var t = MediaType.None;
// Signal the start of a buffering operation
State.SignalBufferingStarted();
#endregion
#region Worker Loop
try
{
// Worker logic begins here
while (Commands.IsStopWorkersPending == false)
{
// Determine what to do on a priority command
if (Commands.IsExecutingDirectCommand)
{
if (Commands.IsClosing)
{
break;
}
if (Commands.IsChanging)
{
Commands.WaitForDirectCommand();
}
}
// Wait for seeking or changing to be done.
Commands.WaitForActiveSeekCommand();
// Enter a packet reading cycle
PacketReadingCycle.Begin();
// Initialize Packets read to 0 for each component and state variables
foreach (var k in Container.Components.MediaTypes)
{
packetsRead[k] = 0;
}
// Start to perform the read loop
// NOTE: Disrupting the packet reader causes errors in UPD streams. Disrupt as little as possible
while (ShouldReadMorePackets &&
CanReadMorePackets &&
Commands.IsActivelySeeking == false)
{
// Perform a packet read. t will hold the packet type.
try { t = Container.Read(); }
catch (MediaContainerException) { continue; }
// Discard packets that we don't need (i.e. MediaType == None)
if (Container.Components.MediaTypes.HasMediaType(t) == false)
{
continue;
}
// Update the packet count for the components
packetsRead[t] += 1;
// Ensure we have read at least some packets from main and auxiliary streams.
if (packetsRead.ContainsMoreThan(0))
{
break;
}
}
// finish the reading cycle.
PacketReadingCycle.Complete();
// Don't evaluate a pause/delay condition if we are seeking
if (Commands.IsActivelySeeking)
{
continue;
}
// Wait some if we have a full packet buffer or we are unable to read more packets (i.e. EOF).
if (ShouldReadMorePackets == false ||
CanReadMorePackets == false ||
packetsRead.GetSum() <= 0)
{
delay.WaitOne();
}
}
}
catch { throw; }
finally
{
// Always exit notifying the reading cycle is done.
PacketReadingCycle.Complete();
delay.Dispose();
}
#endregion
}