/// <summary>
/// 简单的服务定位器
/// </summary>
static ServiceLocator()
{
// 添加全局日志
LogManager.AddLoggerAdapter(new Log4NetLoggerAdapter());
GlobalLogger = LogManager.GetLogger(typeof(ServiceLocator));
try {
// 添加服务 需要注意服务的依赖顺序
DebuggerContainer = new DebuggerContainer();
ScheduleService = new ScheduleService();
ProfileService = new ProfileService(Global.ProfilePath);
ConfigManager = new ConfigManager(Global.ConfigPath);
MapManager = new MapManager(Global.MapPath);
WasManager = new WasManager(Global.WdfPath);
DrawingService = new DrawingService();
ClientEngine = new ClientEngine();
Window = new GlWindow();
} catch (Exception e) {
GlobalLogger.Error(e);
MessageBox.Show(Resources.ServiceLocator_Load_Error);
Environment.Exit(0);
}
}
/// <summary>
/// Overrides <see cref="CADability.GeoObject.ISurfaceImpl.Intersect (ICurve, BoundingRect, out GeoPoint[], out GeoPoint2D[], out double[])"/>
/// </summary>
/// <param name="curve"></param>
/// <param name="uvExtent"></param>
/// <param name="ips"></param>
/// <param name="uvOnFaces"></param>
/// <param name="uOnCurve3Ds"></param>
public override void Intersect(ICurve curve, BoundingRect uvExtent, out GeoPoint[] ips, out GeoPoint2D[] uvOnFaces, out double[] uOnCurve3Ds)
{
if (curve is Line)
{
GeoPoint ip;
if (Plane.Intersect(curve.StartPoint, curve.StartDirection, out ip))
{
ips = new GeoPoint[] { ip };
uvOnFaces = new GeoPoint2D[] { PositionOf(ip) };
uOnCurve3Ds = new double[] { curve.PositionOf(ip) };
}
else
{
ips = new GeoPoint[0];
uvOnFaces = new GeoPoint2D[0];
uOnCurve3Ds = new double[0];
}
#if DEBUG
//GeoPoint[] ipsdbg;
//GeoPoint2D[] uvOnFacesdbg;
//double[] uOnCurve3Dsdbg;
//base.Intersect(curve, out ipsdbg, out uvOnFacesdbg, out uOnCurve3Dsdbg);
#endif
return;
}
//else if (curve is IExplicitPCurve3D)
//{
// ExplicitPCurve3D epc3d = (curve as IExplicitPCurve3D).GetExplicitPCurve3D();
// double [] res = epc3d.GetPlaneIntersection(Location, DirectionX, DirectionY);
// for (int i = 0; i < res.Length; i++)
// {
// double d = Plane.Distance(epc3d.PointAt(res[i]));
// if (i>0) d = Plane.Distance(epc3d.PointAt((res[i]+res[i-1])/2.0));
// }
// double dd = Plane.Distance(epc3d.PointAt(epc3d.knots[epc3d.knots.Length - 1]));
// for (int i = 0; i < res.Length; i++)
// {
// res[i] = (res[i] - epc3d.knots[0]) / (epc3d.knots[epc3d.knots.Length - 1] - epc3d.knots[0]);
// }
//}
else
{
if (curve.GetPlanarState() == PlanarState.Planar)
{
GeoPoint loc;
GeoVector dir;
Plane pln = curve.GetPlane();
if (Plane.Intersect(curve.GetPlane(), out loc, out dir))
{
ICurve2D c2d = curve.GetProjectedCurve(pln);
BoundingRect ext = c2d.GetExtent();
ext.Inflate(ext.Height + ext.Width); // sonst entstehen null-Linien
ICurve2D ll = new Line2D(pln.Project(loc), pln.Project(dir), ext);
#if DEBUG
DebuggerContainer dc = new DebuggerContainer();
dc.Add(c2d);
dc.Add(ll);
#endif
GeoPoint2DWithParameter[] gpp = ll.Intersect(c2d);
ips = new GeoPoint[gpp.Length];
uvOnFaces = new GeoPoint2D[gpp.Length];
uOnCurve3Ds = new double[gpp.Length];
for (int i = 0; i < gpp.Length; ++i)
{
ips[i] = pln.ToGlobal(gpp[i].p);
uvOnFaces[i] = PositionOf(ips[i]);
uOnCurve3Ds[i] = curve.PositionOf(ips[i]);
}
}
else
{
ips = new GeoPoint[0];
uvOnFaces = new GeoPoint2D[0];
uOnCurve3Ds = new double[0];
}
#if DEBUG
//GeoPoint[] ipsdbg;
//GeoPoint2D[] uvOnFacesdbg;
//double[] uOnCurve3Dsdbg;
//base.Intersect(curve, out ipsdbg, out uvOnFacesdbg, out uOnCurve3Dsdbg);
#endif
return;
}
}
TetraederHull th = new TetraederHull(curve);
// alle Kurven müssten eine gemeinsame basis habe, auf die man sich hier beziehen kann
// damit die TetraederHull nicht mehrfach berechnet werden muss
th.PlaneIntersection(this, out ips, out uvOnFaces, out uOnCurve3Ds);
// base.Intersect(curve, out ips, out uvOnFaces, out uOnCurve3Ds);
}
public Shell GetInsidePart()
{
closedBorder.Flatten();
if (!closedBorder.IsClosed)
{
Line l = Line.Construct();
l.SetTwoPoints(closedBorder.EndPoint, closedBorder.StartPoint);
closedBorder.Add(l);
}
vertexToFace = new Face[closedBorder.CurveCount];
for (int i = 0; i < closedBorder.CurveCount; i++)
{
Face fc = FindClosestFace(closedBorder.Curve(i).StartPoint);
if (fc == null)
{
throw new SplitShellWithCurvesException();
}
vertexToFace[i] = fc;
}
all2DCurves = new Dictionary <Face, List <ICurve2D> >();
splitedEdges = new Dictionary <Edge, List <double> >();
for (int i = 0; i < vertexToFace.Length; i++)
{
InsertCurve(i);
}
// jetzt die Faces beschneiden und eine neue Shell bauen
Vertex[] vertices = shell.Vertices;
outsideVertices = new Set <Vertex>();
for (int i = 0; i < vertices.Length; i++)
{ // wenn der Vertex eine Außenkante hat, dann gilt er als außenliegend
Edge[] vedges = vertices[i].Edges;
for (int j = 0; j < vedges.Length; j++)
{
if (vedges[j].SecondaryFace == null)
{
FollowVertex(vertices[j]);
}
}
}
#if DEBUG
DebuggerContainer dc = new DebuggerContainer();
foreach (Vertex vtx in outsideVertices)
{
Point pnt = Point.Construct();
pnt.Location = vtx.Position;
pnt.Symbol = PointSymbol.Circle;
dc.Add(pnt, vtx.GetHashCode());
}
#endif
// alle Faces, die aufgesplitted werden müssen:
Set <Face> splittedFaces = new Set <Face>();
foreach (Edge edge in splitedEdges.Keys)
{
splittedFaces.Add(edge.PrimaryFace);
if (edge.SecondaryFace != null)
{
splittedFaces.Add(edge.SecondaryFace);
}
}
resultingFaces = new List <Face>();
for (int i = 0; i < shell.Faces.Length; i++)
{
Face face = shell.Faces[i];
if (splittedFaces.Contains(face))
{
AddSplittedFace(face);
}
else
{
if (!outsideVertices.Contains(face.Vertices[0]))
{
resultingFaces.Add(face.Clone() as Face);
}
}
}
GeoObjectList res = Make3D.SewFacesAndShells(new GeoObjectList(resultingFaces.ToArray()));
if (res.Count == 1)
{
return(res[0] as Shell);
}
return(null);
}
private void AddSplittedFace(Face face)
{
List <ICurve> edgeCurves = new List <ICurve>();
List <ICurve2D> curves2d = new List <ICurve2D>();
#if DEBUG
Vertex[] vtx = face.Vertices;
bool[] outside = new bool[vtx.Length];
Polyline pln = Polyline.Construct();
for (int i = 0; i < vtx.Length; i++)
{
outside[i] = outsideVertices.Contains(vtx[i]);
pln.AddPoint(vtx[i].Position);
}
DebuggerContainer dc = new DebuggerContainer();
#endif
Edge[] edges = face.AllEdges; // sollte keine Löcher haben
for (int i = 0; i < edges.Length; i++)
{
List <double> positions;
if (splitedEdges.TryGetValue(edges[i], out positions))
{
List <double> pos = new List <double>(positions);
pos.Add(0.0);
pos.Add(1.0);
pos.Sort();
int startj;
Vertex startVertex;
ICurve2D c2d = edges[i].Curve2D(face);
#if DEBUG
dc.Add(c2d, System.Drawing.Color.Red, i);
#endif
if ((face.Surface.PointAt(c2d.StartPoint) | edges[i].Vertex1.Position) <
(face.Surface.PointAt(c2d.StartPoint) | edges[i].Vertex2.Position))
{
startVertex = edges[i].Vertex1;
}
else
{
startVertex = edges[i].Vertex2;
// die Kurve geht andersrum als die Kante, also Kantenschnittpunkte umdrehen
pos.Reverse();
}
if (outsideVertices.Contains(startVertex))
{
startj = 1;
}
else
{
startj = 0;
}
for (int j = startj; j < pos.Count - 1; j += 2)
{
double pos1 = c2d.PositionOf(face.Surface.PositionOf(edges[i].Curve3D.PointAt(pos[j])));
double pos2 = c2d.PositionOf(face.Surface.PositionOf(edges[i].Curve3D.PointAt(pos[j + 1])));
if (pos2 < pos1)
{
double tmp = pos1;
pos1 = pos2;
pos2 = tmp;
}
ICurve2D trimmed = c2d.Trim(pos1, pos2);
curves2d.Add(trimmed);
#if DEBUG
dc.Add(trimmed, System.Drawing.Color.Blue, i);
#endif
}
}
else
{
if (!outsideVertices.Contains(edges[i].Vertex1))
{
#if DEBUG
dc.Add(edges[i].Curve2D(face), System.Drawing.Color.Green, i);
#endif
curves2d.Add(edges[i].Curve2D(face));
}
}
}
List <ICurve2D> lc2d;
if (all2DCurves.TryGetValue(face, out lc2d))
{
for (int i = 0; i < lc2d.Count; i++)
{
#if DEBUG
dc.Add(lc2d[i], System.Drawing.Color.HotPink, i);
#endif
// die folgende Kurve mit Start- und Endpunkt anpassen, denn sie ist evtl ungenau...
curves2d.Add(lc2d[i]);
}
}
// alle zuletzt hinzugefügten Kurven magnetisch einschnappen lassen
for (int i = all2DCurves.Count - lc2d.Count; i < all2DCurves.Count; i++)
{
AddAndAdjust2DCurve(curves2d, i);
}
// eigentlich wäre mehr Information vorhanden, als dass man diese Kurven völlig neu sortieren müsste
// aber so ist es nun mal einfacher
ICurve2D[] acsd = new ICurve2D[curves2d.Count];
for (int i = 0; i < acsd.Length; i++)
{
acsd[i] = curves2d[i].Clone();
}
Reduce2D r2d = new Reduce2D();
r2d.Add(acsd);
r2d.OutputMode = Reduce2D.Mode.Paths;
ICurve2D[] red = r2d.Reduced;
if (red.Length == 1)
{
Border bdr = new Border(red[0]);
SimpleShape ss = new SimpleShape(bdr);
Face splitted = Face.MakeFace(face.Surface, ss);
resultingFaces.Add(splitted);
}
//CompoundShape cs = CompoundShape.CreateFromList(acsd, Precision.eps);
//if (cs != null && cs.SimpleShapes.Length == 1)
//{
// SimpleShape ss = cs.SimpleShapes[0];
// Face splitted = Face.MakeFace(face.Surface, ss);
// resultingFaces.Add(splitted);
//}
//else
//{
//}
}
public override ICurve2D GetFused(ICurve2D toFuseWith, double precision)
{
if (toFuseWith is Line2D)
{
toFuseWith = new Polyline2D(new GeoPoint2D[] { toFuseWith.StartPoint, toFuseWith.EndPoint });
}
if (toFuseWith is Polyline2D)
{
Polyline2D pl1, pl2;
if (length < toFuseWith.Length)
{
pl1 = toFuseWith.Clone() as Polyline2D; // 1. die längere
pl2 = this.Clone() as Polyline2D;
}
else
{
pl1 = this.Clone() as Polyline2D;
pl2 = toFuseWith.Clone() as Polyline2D;
}
// die kürzere muss wenigstens start oder endpunkt auf der längeren haben
double pos1 = pl1.PositionOf(pl2.StartPoint);
double pos2 = pl1.PositionOf(pl2.EndPoint);
bool pos1inside = false;
bool pos2inside = false;
if (pos1 >= 0.0 && pos1 <= 1.0)
{ // Startpunkt liegt drauf
if (Math.Abs(pl1.Distance(pl2.StartPoint)) < precision)
{
pos1inside = true;
}
}
if (pos2 >= 0.0 && pos2 <= 1.0)
{ // Startpunkt liegt drauf
if (Math.Abs(pl1.Distance(pl2.EndPoint)) < precision)
{
pos2inside = true;
}
}
GeoPoint2D split1 = GeoPoint2D.Origin, split2 = GeoPoint2D.Origin;
bool split = false;
if (pos1inside && pos2inside)
{
bool ok = true;
for (int i = 0; i < pl2.VertexCount; i++)
{
if (Math.Abs(pl1.Distance(pl2.vertex[i])) > precision)
{
ok = false;
}
}
if (ok)
{
return(pl1); // die ist es bereits, und es ist ja auch ein clone
}
else
{
return(null); // zu großer Abstand
}
}
else if (pos2inside)
{ // der Endpunkt von pl2 liegt innerhalb, der Startpunkt außerhalb
double p = pl2.PositionOf(pl1.StartPoint);
if (p >= 0.0 && p <= 1.0)
{
if (Math.Abs(pl2.Distance(pl1.StartPoint)) < precision)
{
// fängt an mit pl2, endet mid pl1, beide schon richtige Richtung
split1 = pl1.StartPoint;
split2 = pl2.EndPoint;
split = true;
Polyline2D tmp = pl2;
pl2 = pl1;
pl1 = tmp;
}
}
if (!split)
{
p = pl2.PositionOf(pl1.EndPoint);
if (p >= 0.0 && p <= 1.0)
{
if (Math.Abs(pl2.Distance(pl1.EndPoint)) < precision)
{
// fängt an mit pl2, endet mid pl1, pl1 muss umgedreht werden
split1 = pl1.EndPoint;
split2 = pl2.EndPoint;
split = true;
pl1.Reverse();
Polyline2D tmp = pl2;
pl2 = pl1;
pl1 = tmp;
}
}
}
}
else if (pos1inside)
{ // der Startpunkt von pl2 liegt innerhalb, der Endpunkt außerhalb
double p = pl2.PositionOf(pl1.StartPoint);
if (p >= 0.0 && p <= 1.0)
{
if (Math.Abs(pl2.Distance(pl1.StartPoint)) < precision)
{
// fängt an mit pl1, endet mid pl2, pl1 falschrum
split1 = pl2.StartPoint;
split2 = pl1.StartPoint;
split = true;
pl1.Reverse();
}
}
if (!split)
{
p = pl2.PositionOf(pl1.EndPoint);
if (p >= 0.0 && p <= 1.0)
{
if (Math.Abs(pl2.Distance(pl1.EndPoint)) < precision)
{
// fängt an mit pl1, endet mid pl2, beide richtigrum
split1 = pl2.StartPoint;
split2 = pl1.EndPoint;
split = true;
}
}
}
}
if (split)
{ // sie überlappen sich, das kann im Extramfall acuh einfach zusammenhängend sein
#if DEBUG
DebuggerContainer dc = new DebuggerContainer();
dc.Add(pl1, Color.Red, 1);
dc.Add(pl2, Color.Green, 2);
dc.Add(split1, Color.Red, 3);
dc.Add(split2, Color.Blue, 4);
#endif
// if (pl1.ConnectWith(pl2, precision)) return pl1; // damit ist das schon erledigt, sonst gibt es beim Splitten einen Fehler
// das macht Probleme bei zwei fast identischichen Polylines, die werden sonst in Gegenrichtung miteinander verbunden
ICurve2D[] spl1 = pl1.Split(pl1.PositionOf(split1));
ICurve2D[] spl2 = pl2.Split(pl2.PositionOf(split2));
// Der Anfang von spl1 und das Ende von spl2 sind die Endstücke, das Mittelteil ist doppelt und muss identisch sein
if (spl1.Length == 2 && spl2.Length == 2)
{
Polyline2D m1 = spl1[1] as Polyline2D;
Polyline2D m2 = spl2[0] as Polyline2D;
bool ok = true;
for (int i = 0; i < m1.VertexCount; i++)
{
if (Math.Abs(m2.Distance(m1.vertex[i])) > precision)
{
ok = false;
}
}
if (!ok)
{
return(null);
}
List <GeoPoint2D> pnts = new List <GeoPoint2D>((spl1[0] as Polyline2D).Vertex);
for (int i = 1; i < m2.VertexCount; i++)
{
pnts.Add(m2.vertex[i]);
}
m2 = spl2[1] as Polyline2D;
for (int i = 1; i < m2.VertexCount; i++)
{
pnts.Add(m2.vertex[i]);
}
return(new Polyline2D(pnts.ToArray()));
}
}
}
return(null);
}
