//检查此Rcard所属栈板下Rcard在同一垛位下
private bool CheckRcardIsInTheSameStack(string pallet, string stackCode)
{
InventoryFacade inventoryFacade = new InventoryFacade(this.DataProvider);
PackageFacade packageFacade = new PackageFacade(this.DataProvider);
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
object[] pallet2RCardList = packageFacade.GetPallet2RCardListByPallet(pallet);
if (pallet2RCardList == null)
{
return(true);
}
for (int i = 0; i < pallet2RCardList.Length; i++)
{
string cartonCode = string.Empty;
SimulationReport simulationReport = (SimulationReport)dataCollectFacade.GetLastSimulationReport(((Pallet2RCard)pallet2RCardList[i]).RCard);
if (simulationReport != null)
{
cartonCode = simulationReport.CartonCode;
}
object[] stack2RcardList = inventoryFacade.QueryStacktoRcardByRcardAndCarton(((Pallet2RCard)pallet2RCardList[i]).RCard, cartonCode);
if (stack2RcardList != null && !((StackToRcard)stack2RcardList[0]).StackCode.Equals(stackCode))
{
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_RCARD_IS_NOT_INSAME_STACK:" + ((StackToRcard)stack2RcardList[0]).StackCode));
return(false);
}
}
return(true);
}
/// <summary>
/// Undo时更新Simulation数据
/// </summary>
private void UndoNGSimulation(Simulation simulation, bool isNG, OnWIP wip)
{
// 更新Simulation
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
string lastAction = wip.Action;
simulation.LastAction = lastAction;
string[] actionList = simulation.ActionList.Split(';');
simulation.ActionList = string.Join(";", actionList, 0, actionList.Length - 2) + ";";
simulation.ProductStatus = wip.ActionResult;
if (isNG == true)
{
simulation.NGTimes = simulation.NGTimes - 1;
}
simulation.IsComplete = FormatHelper.BooleanToString(false);
//simulation.RunningCardSequence = wip.RunningCardSequence; // 保留测试信息
dataCollectFacade.UpdateSimulation(simulation);
// 更新SimulationReport
SimulationReport simulationReport = (SimulationReport)dataCollectFacade.GetLastSimulationReport(simulation.RunningCard);
simulationReport.LastAction = lastAction;
simulationReport.Status = wip.ActionResult;
if (isNG == true)
{
simulationReport.NGTimes = simulationReport.NGTimes - 1;
}
simulationReport.IsComplete = FormatHelper.BooleanToString(false);
//simulationReport.RunningCardSequence = wip.RunningCardSequence; // 保留测试信息
dataCollectFacade.UpdateSimulationReport(simulationReport);
}
protected void cmdScrap_ServerClick(object sender, System.EventArgs e)
{
ArrayList selected = this.gridHelper.GetCheckedRows();
string rcard = string.Empty;
string mocode = this.txtMoCodeQuery.Text.Trim();
this.DataProvider.BeginTransaction();
try
{
SimulationReport simulationReport;
DataCollectFacade dcf = new DataCollectFacade(this.DataProvider);
InventoryFacade inventoryFacade = new InventoryFacade(this.DataProvider);
DBDateTime currentDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
foreach (GridRecord row in selected)
{
rcard = row.Items.FindItemByKey("RunningCard").Value.ToString();
simulationReport = dcf.GetLastSimulationReport(rcard);
if (simulationReport == null)
{
throw new Exception("$NoProductInfo $CS_Param_ID=" + rcard);
}
if (simulationReport.IsComplete == "1")
{
throw new Exception("$CS_ERROR_PRODUCT_ALREADY_COMPLETE $CS_Param_ID=" + rcard);
}
//在库不能拆解
object[] stackToRcards = inventoryFacade.QueryStacktoRcardByRcardAndCarton(simulationReport.RunningCard, simulationReport.CartonCode);
if (stackToRcards != null)
{
throw new Exception("$CS_ERROR_PRODUCT_ALREADY_IN_Storge $CS_Param_ID=" + rcard);
}
//end
this._MOFacade.DoScrap(simulationReport, currentDateTime, this.GetUserCode());
//拆Carton和栈板
Messages msg = new Messages();
msg.AddMessages(dcf.RemoveFromCarton(simulationReport.RunningCard, this.GetUserCode()));
msg.AddMessages(dcf.RemoveFromPallet(simulationReport.RunningCard, this.GetUserCode(), true));
}
this.DataProvider.CommitTransaction();
this.gridHelper.RequestData();
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
ExceptionManager.Raise(this.GetType(), "$Error_RCardScrapError", ex);
}
}
//Process Running Card
private void ProcessRCard(string rcard)
{
//根据当前序列号获取最新序列号
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
OQCFacade _OQCFacade = new OQCFacade(this.DataProvider);
string sourceRCard = dataCollectFacade.GetSourceCard(rcard.Trim().ToUpper(), string.Empty);
object objSimulationReport = dataCollectFacade.GetLastSimulationReport(sourceRCard);
if (objSimulationReport != null)
{
// Added By hi1/venus.Feng on 20081127 for Hisense Version : 如果没有Carton信息，则不能进行移转
if (string.IsNullOrEmpty((objSimulationReport as Domain.DataCollect.SimulationReport).CartonCode))
{
ClearRCardInfo();
ucMessage.Add(new UserControl.Message(MessageType.Error
, "$Error_RCardNoCartonInfo $CS_Param_ID =" + rcard));
txtRCard.TextFocus(true, true);
}
else
{
//add by andy xin 判断包装转移判断RCARD是否在TBLLOT2CARD中有
object lot2Card = _OQCFacade.GetOQCLot2Card((objSimulationReport as Domain.DataCollect.SimulationReport).RunningCard, (objSimulationReport as Domain.DataCollect.SimulationReport).MOCode, "", "");
if (lot2Card != null)
{
OQCLot oqcLot = _OQCFacade.GetOQCLot((lot2Card as OQCLot2Card).LOTNO, OQCFacade.Lot_Sequence_Default) as OQCLot;
if (!(oqcLot.LOTStatus == OQCLotStatus.OQCLotStatus_Reject || oqcLot.LOTStatus == OQCLotStatus.OQCLotStatus_Rejecting ||
oqcLot.LOTStatus == OQCLotStatus.OQCLotStatus_Pass || oqcLot.LOTStatus == OQCLotStatus.OQCLotStatus_Passing))
{
ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_RCARD_In_OQC"));
this.txtRCard.TextFocus(true, true);
return;
}
}
DisplayRCardInfo(objSimulationReport as Domain.DataCollect.SimulationReport);
}
// End Added
}
else
{
ClearRCardInfo();
ucMessage.Add(new UserControl.Message(MessageType.Error
, "$NoSimulation $CS_Param_ID =" + rcard));
txtRCard.TextFocus(true, true);
}
}
private Domain.TS.TS GetNewTS(string runningCard, string partItemCode, string partRunningCard, string userCode)
{
SystemSettingFacade systemSettingFacade = new SystemSettingFacade(this.DataProvider);
ShiftModelFacade shiftModelFacade = new ShiftModelFacade(this.DataProvider);
ModelFacade modelFacade = new ModelFacade(this.DataProvider);
TSFacade tsFacade = new TSFacade(this.DataProvider);
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
string sourceRCard = dataCollectFacade.GetSourceCard(runningCard.Trim().ToUpper(), string.Empty);
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
SimulationReport lastSimulation = dataCollectFacade.GetLastSimulationReport(sourceRCard);
if (lastSimulation == null)
{
return(null);
}
Domain.TS.TS newTS = tsFacade.CreateNewTS();
newTS.TSId = Guid.NewGuid().ToString();
newTS.RunningCard = partRunningCard;
newTS.RunningCardSequence = dataCollectFacade.GetMaxRCardSequenceFromTS(partRunningCard) + 100;
newTS.TranslateCard = partRunningCard;
newTS.TranslateCardSequence = newTS.RunningCardSequence;
newTS.SourceCard = partRunningCard;
newTS.SourceCardSequence = newTS.RunningCardSequence;
newTS.CardType = CardType.CardType_Part;
newTS.ReplacedRunningCard = " ";
newTS.ItemCode = partItemCode;
Model model = (Model)modelFacade.GetModelByItemCode(partItemCode);
if (model == null)
{
Parameter parameter = (Parameter)systemSettingFacade.GetParameter("PING", "DEFAULT_MODEL_CODE");
if (parameter != null)
{
newTS.ModelCode = parameter.ParameterAlias.Trim().ToUpper();
}
}
else
{
newTS.ModelCode = model.ModelCode;
}
newTS.MOCode = lastSimulation.MOCode;
newTS.FromRouteCode = lastSimulation.RouteCode;
newTS.FromOPCode = lastSimulation.OPCode;
newTS.FromResourceCode = lastSimulation.ResourceCode;
newTS.FromSegmentCode = lastSimulation.SegmentCode;
newTS.FromStepSequenceCode = lastSimulation.StepSequenceCode;
newTS.FromShiftTypeCode = lastSimulation.ShiftTypeCode;
newTS.MOSeq = lastSimulation.MOSeq;
TimePeriod tp = (TimePeriod)shiftModelFacade.GetTimePeriod(newTS.FromShiftTypeCode, dbDateTime.DBTime);
if (tp != null)
{
newTS.FromTimePeriodCode = tp.TimePeriodCode;
newTS.FromShiftCode = tp.ShiftCode;
newTS.FromShiftDay = shiftModelFacade.GetShiftDay(tp, dbDateTime.DateTime);
}
newTS.FromUser = userCode;
newTS.FromDate = dbDateTime.DBDate;
newTS.FormTime = dbDateTime.DBTime;
newTS.MaintainUser = userCode;
newTS.MaintainDate = dbDateTime.DBDate;
newTS.MaintainTime = dbDateTime.DBTime;
newTS.TSTimes = tsFacade.GetMaxTSTimes(partRunningCard) + 1;
newTS.FromInputType = TSSource.TSSource_TS;
newTS.TSStatus = TSStatus.TSStatus_New;
newTS.TransactionStatus = TransactionStatus.TransactionStatus_NO;
return(newTS);
}
/// <summary>
/// 序列号转换采集，只支持分板，不支持合板
/// </summary>
/// <param name="domainDataProvider"></param>
/// <param name="iD"></param>
/// <param name="actionType"></param>
/// <param name="resourceCode"></param>
/// <param name="userCode"></param>
/// <param name="product"></param>
/// <param name="datas1">转换后的ID组</param>
/// <param name="datas2">NULL</param>
/// <returns></returns>
public Messages Execute(ActionEventArgs actionEventArgs)
{
// Added by Icyer 2006/10/08
if (((SplitIDActionEventArgs)actionEventArgs).IsUndo == true)
{
return(this.UndoExecute((SplitIDActionEventArgs)actionEventArgs));
}
// Added end
Messages messages = new Messages();
DataCollectDebug dataCollectDebug = new DataCollectDebug(this.GetType().ToString() + "Collect");
dataCollectDebug.WhenFunctionIn(messages);
try
{
if (((SplitIDActionEventArgs)actionEventArgs).SplitedIDs == null || ((SplitIDActionEventArgs)actionEventArgs).SplitedIDs.Length == 0)
{
throw new Exception("$CS_System_Params_Losted");
}
ActionOnLineHelper helper = new ActionOnLineHelper(this.DataProvider);
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
//laura: GetLastSimulation into NowSimulation
string sourcCard = actionEventArgs.ProductInfo.LastSimulation.RunningCard.ToUpper();
//GetLastSimulation 是获取当前open工单中的一笔，GetSimulation 是获取所有simulation中mdate 最晚的一笔。
Simulation objSimulation = dataCollectFacade.GetSimulation(sourcCard) as Simulation;
if (objSimulation == null)
{
throw new Exception("rcard in simulation not existed!");
}
actionEventArgs.ProductInfo.NowSimulation = objSimulation;
//laura: GetLastSimulationReport into NowSimulationReport
SimulationReport objSimulationReport = dataCollectFacade.GetLastSimulationReport(sourcCard) as SimulationReport;
if (objSimulationReport == null)
{
throw new Exception("rcard in simulationreport not existed!");
}
actionEventArgs.ProductInfo.NowSimulationReport = objSimulationReport;
//laura: 如果需要，补充 ProductInfo 信息
//to-do...
//
actionEventArgs.ProductInfo.NowSimulation.IDMergeRule = 1; //actionEventArgs.ProductInfo.NowSimulation.IDMergeRule/((SplitIDActionEventArgs)actionEventArgs).SplitedIDs.Length;
actionEventArgs.ProductInfo.NowSimulation.TranslateCard = actionEventArgs.ProductInfo.LastSimulation.RunningCard;
actionEventArgs.ProductInfo.NowSimulation.TranslateCardSequence = actionEventArgs.ProductInfo.LastSimulation.RunningCardSequence;
actionEventArgs.ProductInfo.NowSimulation.NGTimes = actionEventArgs.ProductInfo.LastSimulation.NGTimes;
for (int i = 0; i < ((SplitIDActionEventArgs)actionEventArgs).SplitedIDs.Length; i++)
{
//修改SIMULATION
//Laws Lu,2005/08/15,新增 完工逻辑，在其他Check都通过的情况下，所有的RunningCard应该是GOOD状态
//暂时不考虑线外工序
if (actionEventArgs.ProductInfo.NowSimulation.RouteCode != "" && dataCollectFacade.OPIsMORouteLastOP(
actionEventArgs.ProductInfo.NowSimulation.MOCode
, actionEventArgs.ProductInfo.NowSimulation.RouteCode
, actionEventArgs.ProductInfo.NowSimulation.OPCode))
{
actionEventArgs.ProductInfo.NowSimulation.IsComplete = "1";
actionEventArgs.ProductInfo.NowSimulation.EAttribute1 = "GOOD";
}
//End Laws Lu
actionEventArgs.ProductInfo.NowSimulation.RunningCard = ((SplitIDActionEventArgs)actionEventArgs).SplitedIDs[i].ToString();
/* added by jessie lee,如果是 序列号转换 */
if (string.Compare((actionEventArgs as SplitIDActionEventArgs).IDMergeType, IDMergeType.IDMERGETYPE_IDMERGE, true) == 0)
{
/* 转换到同一张工单 */
if ((actionEventArgs as SplitIDActionEventArgs).UpdateSimulation)
{
actionEventArgs.ProductInfo.NowSimulation.RunningCardSequence
= (actionEventArgs as SplitIDActionEventArgs).ExistIMEISeq + 10;
}
else
{
actionEventArgs.ProductInfo.NowSimulation.RunningCardSequence = ActionOnLineHelper.StartSeq;
}
}
else
{
/* 不是 序列号转换 */
actionEventArgs.ProductInfo.NowSimulation.RunningCardSequence = ActionOnLineHelper.StartSeq;
}
actionEventArgs.ProductInfo.NowSimulation.MOSeq = actionEventArgs.ProductInfo.LastSimulation.MOSeq; // Added by Icyer 2007/07/03
//messages.AddMessages(helper.Execute(actionEventArgs));
//messages.AddMessages(helper.Execute(actionEventArgs, true,false)); //线外工序，不用 insert tblonwip。
if (messages.IsSuccess())
{
//#region 将ID添加到MO2RCARDLINK范围表内
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
//MOFacade _MOFacade = new MOFacade(this.DataProvider);
//MO2RCARDLINK mo2cardlink = new MO2RCARDLINK();
//mo2cardlink.MOCode = actionEventArgs.ProductInfo.NowSimulation.MOCode;
//mo2cardlink.RCard = ((SplitIDActionEventArgs)actionEventArgs).SplitedIDs[i].ToString().Trim().ToUpper();
//mo2cardlink.MDate = dbDateTime.DBDate;
//mo2cardlink.MUser = actionEventArgs.UserCode;
//mo2cardlink.MTime = dbDateTime.DBTime;
//mo2cardlink.PrintTimes = 0;
//mo2cardlink.LastPrintUSER = "";
//mo2cardlink.LastPrintDate = 0;
//mo2cardlink.LastPrintTime = 0;
//_MOFacade.AddMO2RCardLink(mo2cardlink);
//#endregion
#region 将ID添加到SplitBoard
SplitBoard splitBorad = new SplitBoard();
splitBorad.Seq = actionEventArgs.ProductInfo.NowSimulation.RunningCardSequence;
splitBorad.Mocode = actionEventArgs.ProductInfo.NowSimulation.MOCode;
splitBorad.Rcard = ((SplitIDActionEventArgs)actionEventArgs).SplitedIDs[i].ToString().Trim().ToUpper();
splitBorad.Modelcode = actionEventArgs.ProductInfo.NowSimulation.ModelCode;
splitBorad.Itemcode = actionEventArgs.ProductInfo.NowSimulation.ItemCode;
splitBorad.Opcode = actionEventArgs.ProductInfo.NowSimulation.OPCode;
splitBorad.Rescode = actionEventArgs.ResourceCode;
splitBorad.Routecode = actionEventArgs.ProductInfo.NowSimulation.RouteCode;
splitBorad.Scard = actionEventArgs.ProductInfo.NowSimulation.SourceCard;
splitBorad.Segcode = actionEventArgs.ProductInfo.NowSimulationReport.SegmentCode;
splitBorad.Shiftcode = actionEventArgs.ProductInfo.NowSimulationReport.ShiftCode;
splitBorad.Shifttypecode = actionEventArgs.ProductInfo.NowSimulationReport.ShiftTypeCode;
splitBorad.Sscode = actionEventArgs.ProductInfo.NowSimulationReport.StepSequenceCode;
splitBorad.Tpcode = actionEventArgs.ProductInfo.NowSimulationReport.TimePeriodCode;
splitBorad.Muser = actionEventArgs.UserCode;
splitBorad.Mdate = dbDateTime.DBDate;
splitBorad.Mtime = dbDateTime.DBTime;
dataCollectFacade.AddSplitBoard(splitBorad);
#endregion
}
}
//}
}
catch (Exception e)
{
messages.Add(new Message(e));
}
dataCollectDebug.WhenFunctionOut(messages);
return(messages);
}
private void ucLabelEditRcard_TxtboxKeyPress(object sender, KeyPressEventArgs e)
{
if (e.KeyChar == '\r')
{
dtSource.Clear();
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
//转换成起始序列号
string sourceCard = dataCollectFacade.GetSourceCard(this.ucLabelEditRcard.Value.ToString().ToUpper().Trim(), string.Empty);
//end
object objSimulationReport = dataCollectFacade.GetLastSimulationReport(sourceCard);
if (objSimulationReport != null)
{
SimulationReport simulationReport = objSimulationReport as SimulationReport;
if (simulationReport.IsComplete.Equals("1"))
{
ucMessageInfo.AddEx(null, this.ucLabelEditRcard.Value, new UserControl.Message(MessageType.Error, "$Error_RunningCard_IsCompelete"), true);
this.ucLabelEditRcard.TextFocus(false, true);
return;
}
this.ucLabelEditItemCode.Value = simulationReport.ItemCode;
this.ucLabelEditOp.Value = simulationReport.OPCode;
this.ucLabelEditRout.Value = simulationReport.RouteCode;
object objMo = moFacade.GetMO(simulationReport.MOCode);
object objItem = itemFacade.GetItem(simulationReport.ItemCode, ((MO)objMo).OrganizationID);
this.ucLabelEditName.Value = ((Item)objItem).ItemName;
object[] objOperation = null;
if (simulationReport.Status.Equals("GOOD"))
{
objOperation = itemFacade.QueryItemRoute2Operation(simulationReport.ItemCode, simulationReport.RouteCode);
CheckNextOp(simulationReport.MOCode, simulationReport.RouteCode, simulationReport.OPCode);
}
if (simulationReport.Status.Equals("NG"))
{
TSFacade tsFacade = new TSFacade(this.DataProvider);
object objTs = tsFacade.QueryLastTSByRunningCard(sourceCard);
if (objTs != null)
{
string refRouteCode = ((Domain.TS.TS)objTs).ReflowRouteCode;
string refOpCode = ((Domain.TS.TS)objTs).ReflowOPCode;
if (refRouteCode == string.Empty || refOpCode == string.Empty)
{
objOperation = itemFacade.QueryItemRoute2Operation(simulationReport.ItemCode, simulationReport.RouteCode);
CheckNextOp(simulationReport.MOCode, simulationReport.RouteCode, simulationReport.OPCode);
}
else
{
this.ucLabelEditOp.Value = ((Domain.TS.TS)objTs).ConfirmOPCode;
objOperation = itemFacade.QueryItemRoute2Operation(simulationReport.ItemCode, refRouteCode);
BaseModelFacade baseModelFacade = new BaseModelFacade(this.DataProvider);
object objOP2Res = baseModelFacade.GetOperationByResource(ApplicationService.Current().ResourceCode);
string opCode2Res = string.Empty;
if (objOP2Res != null)
{
opCode2Res = ((Operation2Resource)objOP2Res).OPCode;
}
_NextOP = refOpCode;
if (opCode2Res != refOpCode)
{
string opDesc = ((Operation)baseModelFacade.GetOperation(refOpCode)).OPDescription;
ucMessageInfo.AddEx(null, this.ucLabelEditRcard.Value, new UserControl.Message(MessageType.Error, "$Error_Please_Send_Rcard_To " + opDesc + " $CS_Param_OPCode"), true);
}
}
}
}
if (objOperation != null)
{
foreach (Operation operation in objOperation)
{
DataRow dr = dtSource.NewRow();
dr["opCode"] = operation.OPCode;
dr["opDescription"] = operation.OPDescription;
dtSource.Rows.Add(dr);
}
ultraGridHead.DataSource = dtSource;
}
}
else
{
this.ucLabelEditItemCode.Value = "";
this.ucLabelEditOp.Value = "";
this.ucLabelEditRout.Value = "";
this.ucLabelEditName.Value = "";
ucMessageInfo.AddEx(null, this.ucLabelEditRcard.Value, new UserControl.Message(MessageType.Error, "$Error_ProductInfo_IS_Null"), true);
}
this.ucLabelEditRcard.TextFocus(false, true);
}
}
/// <summary>
/// 维修完成
/// </summary>
/// <param name="actionEventArgs"></param>
/// <returns></returns>
public Messages Execute(ActionEventArgs actionEventArgs)
{
Messages messages = new Messages();
DataCollectDebug dataCollectDebug = new DataCollectDebug(this.GetType().ToString() + "Collect");
dataCollectDebug.WhenFunctionIn(messages);
try
{
ActionOnLineHelper dataCollect = new ActionOnLineHelper(this.DataProvider);
//检查res在不在OPTS中
// Modified By Hi1/Venus.Feng on 20080711 for Hisense Version : 对于自动作Reflow的动作来讲，不再Check Resource是否在回流的工序中
if (((TSActionEventArgs)actionEventArgs).IgnoreResourceInOPTS != true)
{
messages.AddMessages(dataCollect.CheckResourceInOperationTS(actionEventArgs));
}
// End Modified
if (messages.IsSuccess())
{
TSFacade tsFacade = new TSFacade(this.DataProvider);
// if( !tsFacade.IsCardInTS(actionEventArgs.RunningCard))
// {
// messages.Add(new Message(MessageType.Error,"$CSError_Card_Not_In_TS"));
// }
// if(messages.IsSuccess())
// {
//Laws Lu,2005/09/16,修改 逻辑调整P4.8
object obj = tsFacade.GetCardLastTSRecord(actionEventArgs.RunningCard);
if (obj == null)
{
messages.Add(new Message(MessageType.Error, "$CSError_Card_Not_In_TS"));
//messages.Add(new Message(MessageType.Error,"$CSError_Card_TSStatus_IsNot_TS"));
}
else
{
Domain.TS.TS ts = (Domain.TS.TS)obj;
if (ts.TSStatus == TSStatus.TSStatus_Scrap ||
ts.TSStatus == TSStatus.TSStatus_Split ||
ts.TSStatus == TSStatus.TSStatus_Reflow ||
ts.TSStatus == TSStatus.TSStatus_Confirm)
{
messages.Add(new Message(MessageType.Error, "$CSError_Card_TSStatus_IsNot_TS $Current_Status $" + ts.TSStatus));
}
if (messages.IsSuccess())
{
//2006/11/17,Laws Lu add get DateTime from db Server
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(DataProvider);
DateTime dtNow = FormatHelper.ToDateTime(dbDateTime.DBDate, dbDateTime.DBTime);
//修改 Karron Qiu,2005-9-26
if (ts.FromInputType == TS.TSFacade.TSSource_OnWIP)//线上.必须是回流或者报废
{
if (((TSActionEventArgs)actionEventArgs).TSStatus == TSStatus.TSStatus_Complete)
{
messages.Add(new Message(MessageType.Error, "$CSError_Please_Select_Reflow_OR_Scrap"));//请选择回流或者报废
}
}
else if (ts.FromInputType == TS.TSFacade.TSSource_TS)//离线. 不能回流
{
if (((TSActionEventArgs)actionEventArgs).TSStatus == TSStatus.TSStatus_Reflow)
{
messages.Add(new Message(MessageType.Error, "$CSError_Offline_Cannot_Reflow"));//离线不能回流
}
}
else if (ts.FromInputType == TS.TSFacade.TSSource_RMA)//RMA. 不能回流
{
if (((TSActionEventArgs)actionEventArgs).TSStatus == TSStatus.TSStatus_Reflow)
{
messages.Add(new Message(MessageType.Error, "$CSError_RMATS_Cannot_Reflow"));//RMA不能回流
}
}
//Laws Lu,2005/11/09,新增 记录ShiftDay
BaseSetting.BaseModelFacade dataModel = new BaseSetting.BaseModelFacade(this.DataProvider);
Domain.BaseSetting.Resource res = (Domain.BaseSetting.Resource)dataModel.GetResource(actionEventArgs.ResourceCode);
//onwip.SegmentCode = productInfo.NowSimulationReport.SegmentCode;
BaseSetting.ShiftModelFacade shiftModel = new BaseSetting.ShiftModelFacade(this.DataProvider);
Domain.BaseSetting.TimePeriod period = (Domain.BaseSetting.TimePeriod)shiftModel.GetTimePeriod(res.ShiftTypeCode, Web.Helper.FormatHelper.TOTimeInt(dtNow));
int shiftDay = 0;
if (period == null)
{
throw new Exception("$OutOfPerid");
}
if (period.IsOverDate == Web.Helper.FormatHelper.TRUE_STRING)
{
if (period.TimePeriodBeginTime < period.TimePeriodEndTime)
{
shiftDay = FormatHelper.TODateInt(dtNow.AddDays(-1));
}
else if (Web.Helper.FormatHelper.TOTimeInt(dtNow) < period.TimePeriodBeginTime)
{
shiftDay = FormatHelper.TODateInt(dtNow.AddDays(-1));
}
else
{
shiftDay = FormatHelper.TODateInt(dtNow);
}
}
else
{
shiftDay = FormatHelper.TODateInt(dtNow);
}
#region 报废
if (((TSActionEventArgs)actionEventArgs).TSStatus == TSStatus.TSStatus_Scrap)
{
if (ts.TSStatus == TSStatus.TSStatus_TS || ts.TSStatus == TSStatus.TSStatus_Confirm)
{
ts.TSStatus = TSStatus.TSStatus_Scrap;
ts.TSResourceCode = actionEventArgs.ResourceCode;
ts.TSUser = actionEventArgs.UserCode;
ts.TSDate = shiftDay;
ts.TSTime = FormatHelper.TOTimeInt(dtNow);
//added by jessie lee, 2005/11/24,
//新增报废原因
ts.ScrapCause = (actionEventArgs as TSActionEventArgs).ScrapCause;
ts.MaintainUser = (actionEventArgs as TSActionEventArgs).MaintainUser;
ts.MaintainDate = ts.TSDate;
ts.MaintainTime = ts.TSTime;
//TODO：Laws Lu,2005/11/09，需要优化
tsFacade.UpdateTS(ts);
//added by alex,2010/11/09
BenQGuru.eMES.OQC.OQCFacade oqcFacade = new BenQGuru.eMES.OQC.OQCFacade(this.DataProvider);
OQCLot2Card oqcLot2Card = oqcFacade.GetLastOQCLot2CardByRCard(actionEventArgs.RunningCard) as OQCLot2Card;
if (oqcLot2Card != null)
{
oqcLot2Card.Status = "SCRAP";
oqcFacade.UpdateOQCLot2Card(oqcLot2Card);
}
MOFacade moFAC = new MOFacade(this._domainDataProvider);
if (ts.FromInputType == TSFacade.TSSource_OnWIP)
{
//Laws Lu,2005/08/19,新增
//Laws Lu,2005/08/25,修改 处理报废时,更新工单的报废数量
doAction(actionEventArgs);
}
}
else
{
messages.Add(new Message(MessageType.Error, "$CSError_Card_TSStatus_IsNot_TS_OR_Confirm"));
}
}
#endregion
#region 完成
if (((TSActionEventArgs)actionEventArgs).TSStatus == TSStatus.TSStatus_Complete)
{
if (ts.TSStatus == TSStatus.TSStatus_TS)
{
ts.TSStatus = TSStatus.TSStatus_Complete;
ts.TSTimes = 1;
//added by jessie lee, 2005/11/24,
ts.MaintainUser = (actionEventArgs as TSActionEventArgs).MaintainUser;
ts.TSUser = actionEventArgs.UserCode;
ts.MaintainDate = FormatHelper.TODateInt(dtNow);
ts.MaintainTime = FormatHelper.TOTimeInt(dtNow);
//Laws Lu,2006/04/28 add 添加维修shiftday和维修resourcecode
ts.TSDate = shiftDay;
ts.TSTime = FormatHelper.TOTimeInt(dtNow);
ts.TSResourceCode = actionEventArgs.ResourceCode;
tsFacade.UpdateTS(ts);
// Added by Icyer 2006/11/07, KeyPart维修完成
if (ts.CardType == CardType.CardType_Part && ts.FromInputType == TSFacade.TSSource_TS)
{
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
SimulationReport simRpt = dataCollectFacade.GetLastSimulationReport(ts.RunningCard);
if (simRpt != null && simRpt.Status == ProductStatus.NG)
{
simRpt.Status = ProductStatus.GOOD;
dataCollectFacade.UpdateSimulationReport(simRpt);
}
}
// Added end
}
else
{
messages.Add(new Message(MessageType.Error, "$CSError_Card_TSStatus_IsNot_TS $Current_Status $" + ts.TSStatus));
}
}
#endregion
#region 回流
if (((TSActionEventArgs)actionEventArgs).TSStatus == TSStatus.TSStatus_Reflow)
{
if (ts.TSStatus == TSStatus.TSStatus_TS)
{
ts.TSStatus = TSStatus.TSStatus_Reflow;
ts.ReflowMOCode = ((TSActionEventArgs)actionEventArgs).MOCode;
//ts.ReflowResourceCode = ((TSActionEventArgs)actionEventArgs).ItemCode ;
ts.ReflowRouteCode = ((TSActionEventArgs)actionEventArgs).RouteCode;
ts.ReflowOPCode = ((TSActionEventArgs)actionEventArgs).OPCode;
//added by jessie lee, 2005/11/24,
//added by jessie lee, 2005/11/24,
ts.MaintainUser = (actionEventArgs as TSActionEventArgs).MaintainUser;
ts.TSUser = actionEventArgs.UserCode;
ts.MaintainDate = FormatHelper.TODateInt(dtNow);
ts.MaintainTime = FormatHelper.TOTimeInt(dtNow);
//Laws Lu,2006/04/28 add 添加维修shiftday和维修resourcecode
ts.TSDate = shiftDay;
ts.TSTime = FormatHelper.TOTimeInt(dtNow);
ts.TSResourceCode = actionEventArgs.ResourceCode;
tsFacade.UpdateTSReflowStatus(ts);
}
else
{
messages.Add(new Message(MessageType.Error, "$CSError_Card_TSStatus_IsNot_TS $Current_Status $" + ts.TSStatus));
}
}
#endregion
}
}
}
}
catch (Exception e)
{
messages.Add(new Message(e));
}
dataCollectDebug.WhenFunctionOut(messages);
return(messages);
}
private void ucBtnOK_Click(object sender, System.EventArgs e)
{
if (this.ucLERunningCard.Value.Trim() == string.Empty)
{
//Laws Lu,2005/08/11,新增焦点设置
ucLERunningCard.TextFocus(true, true);
return;
}
this.ucMessage.Add(string.Format("<< {0}", this.ucLERunningCard.Value.Trim().ToUpper()));
// 输入分板前产品序列号
if (this._currSequence == 0)
{
#region 工单、序列号匹配
_runningCardList = new ArrayList();
if (this.txtMoCode.Checked)
{
if (string.IsNullOrEmpty(txtMoCode.Value.ToUpper().Trim()))
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Please_Input_MOCode"));
this.ucLERunningCard.Value = "";
//Laws Lu,2005/08/11,新增焦点设置
txtMoCode.Focus();
return;
}
}
//Laws Lu,2005/10/19,新增 缓解性能问题
//Laws Lu,2006/12/25 修改 减少Open/Close的次数
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection();
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.AutoCloseConnection = true;
//added by jessie lee, 2005/11/29
#region 判断转换前序列号是否符合条件
//长度检查
if (bCardTransLenULE.Checked)
{
if (bCardTransLenULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Transfer_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int len = 0;
try
{
len = int.Parse(bCardTransLenULE.Value.Trim());
}
catch
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_BeforeCardTransLen_Should_be_Integer"));
ucLERunningCard.TextFocus(true, true);
return;
}
if (len != this.ucLERunningCard.Value.Trim().Length)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_BeforeCardTransLen_Not_Correct"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
//首字符串检查
if (bCardTransLetterULE.Checked)
{
if (bCardTransLetterULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Transfer_FLetter_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int index = ucLERunningCard.Value.Trim().IndexOf(bCardTransLetterULE.Value.Trim());
if (index != 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Transfer_FLetter_NotCompare"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
#endregion
#region 取得分板比例,从工单和SMT是否是打叉板得到分板比例，若不是，带出工单的分版比例
simReport = _DataCollectFacade.GetLastSimulationReport(this.ucLERunningCard.Value.Trim().ToUpper());
if (simReport == null)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_ID_Not_Exist"));
this.ucLERunningCard.Value = "";
this.ucLERunningCard.TextFocus(true, true);
return;
}
else
{
if (simReport.IsComplete != "1")
{
//完工后才可以分板，故注释。
//主要应用于以下业务情况：
//序列号 s1 通过两张工单 mo1, mo2 完成。s1 经过第一张工单 mo1 完工后，需要进行分板 s1--> s1-1, s1-2，
//分板后再用 s1-1, s1-2 进行第二张工单 mo2 的归属生产。
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_ERROR_PRODUCT_NO_COMPLETE"));
ucLERunningCard.TextFocus(true, true);
return;
}
if (txtMoCode.Checked)
{
if (string.Compare(txtMoCode.Value.ToUpper().Trim(), simReport.MOCode, true) != 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$RCARD_NOT_IN_MO"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
int rcardCount = _DataCollectFacade.GetSplitBoardCount(this.ucLERunningCard.Value.Trim().ToUpper());
if (rcardCount > 0)
{
//已经分板的序列号就不可以在分了
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_ERROR_PRODUCT_ALREADY_SPLITE"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
SMTFacade smtFacade = new SMTFacade(this.DataProvider);
object objsmtrel = smtFacade.GetSMTRelationQty(this.ucLERunningCard.Value.Trim().ToUpper(), simReport.MOCode);
if (objsmtrel != null)
{
Smtrelationqty smtrel = (Smtrelationqty)objsmtrel;
this.txtIDMergeValue.Text = Convert.ToString(smtrel.Relationqtry);
}
else
{
MOFacade mofacade = new MOFacade(this.DataProvider);
object objMO = mofacade.GetMO(simReport.MOCode);
if (objMO != null)
{
MO mo = (MO)objMO;
this.txtIDMergeValue.Text = Convert.ToString(mo.IDMergeRule);
}
else
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_MO_Not_Exit"));
txtMoCode.Focus();
txtMoCode.SelectAll();
return;
}
}
#endregion
#region 判断分板前序列号是否存在
int mergeRule = 1;
try
{
mergeRule = System.Int32.Parse(this.txtIDMergeValue.Text.ToUpper().Trim());
}
catch
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_IDMerge_Should_be_Integer"));//分板比例必须为整数
//Laws Lu,2005/08/11,新增焦点设置
ucLERunningCard.TextFocus(true, true);
return;
}
if (mergeRule <= 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_IDMerge_Should_Over_Zero"));//分板比例必须大于零
ucLERunningCard.TextFocus(true, true);
return;
}
this._mergeRule = mergeRule;
#endregion
#endregion
}
else
{
//added by jessie lee, 2005/11/29
#region 判断转换后序列号是否符合条件
//长度检查
if (aCardTransLenULE.Checked)
{
if (aCardTransLenULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_After_Card_Transfer_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int len = 0;
try
{
len = int.Parse(aCardTransLenULE.Value.Trim());
}
catch
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_AfterCardTransLen_Should_be_Integer"));
ucLERunningCard.TextFocus(true, true);
return;
}
if (len != this.ucLERunningCard.Value.Trim().Length)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_AfterCardTransLen_Not_Correct"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
//首字符串检查
if (aCardTransLetterULE.Checked)
{
if (aCardTransLetterULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_After_Card_Transfer_FLetter_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int index = ucLERunningCard.Value.Trim().IndexOf(aCardTransLetterULE.Value.Trim());
if (index != 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_After_Card_Transfer_FLetter_NotCompare"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
#endregion
#region 判断分板后序列号是否重复
if (this._runningCardList.Contains(this.ucLERunningCard.Value.Trim().ToUpper()))
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_Merge_ID_Exist"));//转换后产品序列号重复
this.ucLERunningCard.Value = "";
//Laws Lu,2005/08/11,新增焦点设置
ucLERunningCard.TextFocus(true, true);
return;
}
#endregion
int rcardCount = _DataCollectFacade.GetSplitBoardCount(this.ucLERunningCard.Value.Trim().ToUpper());
if (rcardCount > 0)
{
//已经分板的序列号就不可以在分了
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_ERROR_PRODUCT_ALREADY_SPLITE"));
this.ucMessage.AddBoldText(string.Format(">>$CS_Please_Input_Merge_ID {0}/{1}", this._currSequence.ToString(), this._mergeRule.ToString()));//请输入转换后产品序列号
ucLERunningCard.TextFocus(true, true);
return;
}
this._runningCardList.Add(this.ucLERunningCard.Value.Trim().ToUpper());
}
if (this._currSequence < this._mergeRule)
{
this._currSequence++;
this.txtIDMergeValue.Enabled = false;
this.ucMessage.AddBoldText(string.Format(">>$CS_Please_Input_Merge_ID {0}/{1}", this._currSequence.ToString(), this._mergeRule.ToString())); //请输入转换后产品序列号
}
else if (this._currSequence == this._mergeRule) // 达到分板比例,写入数据库
{
try
{
this.DataProvider.BeginTransaction();
int tempCount = 1;
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
foreach (string strRcard in _runningCardList)
{
#region 将ID添加到SplitBoard
SplitBoard splitBorad = new SplitBoard();
splitBorad.Seq = tempCount;
splitBorad.Mocode = simReport.MOCode;
splitBorad.Rcard = strRcard;
splitBorad.Modelcode = simReport.ModelCode;
splitBorad.Itemcode = simReport.ItemCode;
splitBorad.Opcode = simReport.OPCode;
splitBorad.Rescode = ApplicationService.Current().ResourceCode;
splitBorad.Routecode = simReport.RouteCode;
splitBorad.Scard = simReport.SourceCard;
splitBorad.Segcode = simReport.SegmentCode;
splitBorad.Shiftcode = simReport.ShiftCode;
splitBorad.Shifttypecode = simReport.ShiftTypeCode;
splitBorad.Sscode = simReport.StepSequenceCode;
splitBorad.Tpcode = simReport.TimePeriodCode;
splitBorad.Muser = ApplicationService.Current().UserCode;
splitBorad.Mdate = dbDateTime.DBDate;
splitBorad.Mtime = dbDateTime.DBTime;
_DataCollectFacade.AddSplitBoard(splitBorad);
tempCount++;
#endregion
}
this.DataProvider.CommitTransaction();
this.ucMessage.Add(new UserControl.Message(MessageType.Success, ">>$CS_SplitID_CollectSuccess"));//产品序列号转换采集成功
//added by jessie lee, 2005/11/29,
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
this.ucMessage.Add(new UserControl.Message(MessageType.Error, ">>$CS_SplitID_CollectSuccess"));//产品序列号转换采集成功
}
this.initInput();
}
this.ucLERunningCard.Value = "";
//Laws Lu,2005/08/11,新增焦点设置
if (!aCardTransLetterULE.Checked)
{
ucLERunningCard.TextFocus(true, true);
}
else
{
ucLERunningCard.TextFocus(true, true);
}
}
//check for carton capacity if overload
private bool CheckTargetCarton(string tagCarton)
{
bool bResult = true;
m_NeedAddNewCarton = false;
object obj = (new Package.PackageFacade(DataProvider)).GetCARTONINFO(tagCarton);
if (tagCarton == txtCurrentCarton.Value.ToUpper().Trim())
{
ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_TAG_CARTON_EQUAL_CUR_CARTON $CS_CARTON_NO =" + tagCarton));
bResult = false;
}
#region OQC检验
//Added by lisa@2012-8-29
//检查目标小箱是否已经在OQC处理过程中
OQCFacade _OQCFacade = new OQCFacade(this.DataProvider);
Lot2Carton lot2carton = _OQCFacade.GetLot2CartonByCartonNo(tagCarton) as Lot2Carton;
OQCLot oqcCartonLot = null;
if (lot2carton != null)
{
oqcCartonLot = _OQCFacade.GetOQCLot(lot2carton.OQCLot, OQCFacade.Lot_Sequence_Default) as OQCLot;
if (oqcCartonLot != null && !(oqcCartonLot.LOTStatus == OQCLotStatus.OQCLotStatus_Reject || oqcCartonLot.LOTStatus == OQCLotStatus.OQCLotStatus_Rejecting ||
oqcCartonLot.LOTStatus == OQCLotStatus.OQCLotStatus_Pass || oqcCartonLot.LOTStatus == OQCLotStatus.OQCLotStatus_Passing))
{
ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_RCARD_In_OQC"));
this.txtRCard.TextFocus(false, true);
return(false);
}
}
//检查当前Rcard所在箱和目标箱的OQC状态是否一致，或者都不在OQC中，或者都是OQC判过，或者都是OQC判退
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
string sourceRCard = dataCollectFacade.GetSourceCard(txtRCard.Value.Trim().ToUpper(), string.Empty);
object objSimulationReport = dataCollectFacade.GetLastSimulationReport(sourceRCard);
string currentlotno = (objSimulationReport as Domain.DataCollect.SimulationReport).LOTNO;
OQCLot oqcRcardLot = null;
if (!string.IsNullOrEmpty(currentlotno))
{
oqcRcardLot = _OQCFacade.GetOQCLot(currentlotno.Trim(), OQCFacade.Lot_Sequence_Default) as OQCLot;
}
if (!(oqcCartonLot == null && oqcRcardLot == null))
{
if (oqcCartonLot == null)
{
ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_RCARD_CARTON_OQC_NOT_SAME"));
this.txtRCard.TextFocus(false, true);
return(false);
}
if (oqcRcardLot == null)
{
ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_RCARD_CARTON_OQC_NOT_SAME"));
this.txtRCard.TextFocus(false, true);
return(false);
}
if (oqcCartonLot.LOTStatus != oqcRcardLot.LOTStatus)
{
ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_RCARD_CARTON_OQC_NOT_SAME"));
this.txtRCard.TextFocus(false, true);
return(false);
}
}
#endregion
if (obj == null)
{
//ucMessage.Add(new UserControl.Message(MessageType.Error,"$CS_CARTON_NOT_EXIST $CS_CARTON_NO =" + tagCarton));
bResult = false;
m_NeedAddNewCarton = true;
}
else
{
Domain.Package.CARTONINFO carton = obj as Domain.Package.CARTONINFO;
if (carton.COLLECTED >= carton.CAPACITY)
{
ucMessage.Add(new UserControl.Message(MessageType.Error, "$CARTON_ALREADY_FILL_OUT $CS_CARTON_NO =" + tagCarton));
bResult = false;
}
}
return(bResult);
}
//Process Carton NO
private void ProcessCarton(string cartonno)
{
DataCollectFacade dcf = new DataCollectFacade(DataProvider);
string rCard = txtRCard.Value.Trim().ToUpper();
rCard = dcf.GetSourceCard(rCard, string.Empty);
//箱号为空时，表示序列号从旧箱中移除
if (cartonno == String.Empty)
{
#region RCARD 从 Carton中移出
if (DialogResult.OK == MessageBox.Show(this, MutiLanguages.ParserString("$CS_Confirm_Transfer_1") + " " + txtRCard.Value.Trim().ToUpper() + " "
+ MutiLanguages.ParserString("$CS_Confirm_Transfer_2") + txtCurrentCarton.Value.Trim().ToUpper() + " " + MutiLanguages.ParserString("$CS_Confirm_Transfer_3"), MutiLanguages.ParserString("$ShowConfirm"), MessageBoxButtons.OKCancel))
{
InventoryFacade materialDCF = new InventoryFacade(DataProvider);
object objSimulationReport = dcf.GetLastSimulationReport(rCard);
//在制品存在
if (objSimulationReport != null)
{
Domain.DataCollect.SimulationReport sim = objSimulationReport as Domain.DataCollect.SimulationReport;
sim.CartonCode = String.Empty;
PackageFacade pf = new PackageFacade(DataProvider);
#region 移出操作
DataProvider.BeginTransaction();
try
{
dcf.RemoveFromCarton(sim.RunningCard, ApplicationService.Current().UserCode);
//dcf.RemoveFromPallet2RCard(sim.RunningCard);
DataProvider.CommitTransaction();
ucMessage.Add(new UserControl.Message(MessageType.Success
, "$CS_RCARD_BREAK_FROM_CARTON_SUCCESS $CS_Param_ID =" + txtRCard.Value.Trim().ToUpper()));
txtRCard.TextFocus(true, true);
txtCartonNO.Value = String.Empty;
ClearRCardInfo();
}
catch (Exception ex)
{
DataProvider.RollbackTransaction();
ucMessage.Add(new UserControl.Message(ex));
txtCartonNO.TextFocus(true, true);
}
finally
{
(DataProvider as SQLDomainDataProvider).PersistBroker.CloseConnection();
}
#endregion
}
else//在制品不存在
{
ucMessage.Add(new UserControl.Message(MessageType.Error
, "$NoSimulation $CS_Param_ID =" + txtRCard.Value.Trim().ToUpper()));
ClearRCardInfo();
txtRCard.TextFocus(true, true);
}
}
#endregion
}
else
{
#region RCARD 从当前Carton移转到另外一个Carton
InventoryFacade materialDCF = new InventoryFacade(DataProvider);
//ActionOnLineHelper onlineHelper = new ActionOnLineHelper(DataProvider);
if (!CheckTargetCarton(cartonno))
{
if (!m_NeedAddNewCarton)
{
txtCartonNO.TextFocus(true, true);
return;
}
}
string sourceCard = dcf.GetSourceCard(txtRCard.Value.Trim().ToUpper(), string.Empty);
object objSimulationReport = dcf.GetLastSimulationReport(sourceCard);
if (objSimulationReport != null)
{
Domain.DataCollect.SimulationReport simulationReport = objSimulationReport as Domain.DataCollect.SimulationReport;
simulationReport.CartonCode = cartonno.Trim().ToUpper();
Package.PackageFacade pf = new BenQGuru.eMES.Package.PackageFacade(DataProvider);
#region 移转操作
DataProvider.BeginTransaction();
try
{
//Add By Bernard @ 2010-11-01
string moCode = txtMoCode.Value.Trim().ToUpper();
string oldCartonno = txtCurrentCarton.Value.Trim().ToUpper();
bool m_HasCartonAdded = false;
//end
//包装箱不存在，为CartonInfo表增加一个包装箱信息
if (m_NeedAddNewCarton)
{
DBDateTime currentDateTime = FormatHelper.GetNowDBDateTime(DataProvider);
BenQGuru.eMES.Domain.Package.CARTONINFO newCarton = new BenQGuru.eMES.Domain.Package.CARTONINFO();
newCarton.CARTONNO = cartonno.Trim().ToUpper();
newCarton.CAPACITY = ((new ItemFacade(DataProvider)).GetItem(simulationReport.ItemCode, GlobalVariables.CurrentOrganizations.First().OrganizationID) as Item).ItemCartonQty;
newCarton.COLLECTED = 0;
newCarton.EATTRIBUTE1 = "";
newCarton.PKCARTONID = System.Guid.NewGuid().ToString().ToUpper();
newCarton.MUSER = ApplicationService.Current().UserCode;
newCarton.MDATE = currentDateTime.DBDate;
newCarton.MTIME = currentDateTime.DBTime;
pf.AddCARTONINFO(newCarton);
//0.向tblcarton2rcard表增加一个包装箱 Add By Bernard @ 2010-11-01
Carton2RCARD newCarton2RCard = new Carton2RCARD();
newCarton2RCard.CartonCode = cartonno.Trim().ToUpper();
newCarton2RCard.Rcard = rCard;
newCarton2RCard.MUser = ApplicationService.Current().UserCode;
newCarton2RCard.MDate = currentDateTime.DBDate;
newCarton2RCard.MTime = currentDateTime.DBTime;
newCarton2RCard.Eattribute1 = "";
newCarton2RCard.MOCode = moCode;
pf.AddCarton2RCARD(newCarton2RCard);
m_HasCartonAdded = true;
//end
}
//1.判断新箱与旧箱内产品工单代码是否一致 Add By Bernard @ 2010-11-01
object oldObj = pf.GetCarton2RCARD(oldCartonno, rCard);
//modified by lisa @20120829
//string newMOCode = moCode;
object[] newObj = pf.GetCarton2RCARDByCartonNO(FormatHelper.CleanString(this.txtCartonNO.Value.Trim()));
string newMOCode = ((Carton2RCARD)newObj[0]).MOCode;
//end add
string oldMOCode = ((Carton2RCARD)oldObj).MOCode;
if (oldMOCode == newMOCode) //工单代码一致
{
if (m_HasCartonAdded == false) //箱号没有新增,则向Carton2RCard新增一条记录
{
DBDateTime currentDateTime = FormatHelper.GetNowDBDateTime(DataProvider);
Carton2RCARD carton2rcard = new Carton2RCARD();
carton2rcard.Rcard = rCard;
carton2rcard.CartonCode = cartonno;
carton2rcard.MOCode = moCode;
carton2rcard.MUser = ApplicationService.Current().UserCode;
carton2rcard.MDate = currentDateTime.DBDate;
carton2rcard.MTime = currentDateTime.DBTime;
carton2rcard.Eattribute1 = "";
pf.AddCarton2RCARD(carton2rcard);
}
//end
dcf.RemoveFromCarton(simulationReport.RunningCard, ApplicationService.Current().UserCode);
pf.UpdateCollected(cartonno.Trim().ToUpper());
Domain.DataCollect.Simulation simulation = (Domain.DataCollect.Simulation)dcf.GetSimulation(simulationReport.RunningCard);
if (simulation != null)
{
simulation.CartonCode = cartonno.Trim().ToUpper();
dcf.UpdateSimulation(simulation);
}
dcf.UpdateSimulationReport(simulationReport);
//记log
pf.addCarton2RCARDLog(cartonno, simulationReport.RunningCard, ApplicationService.Current().UserCode);
//end
}
else//新旧包装箱工单代码不一致 Add By Bernard @ 2010-11-01
{
if (m_HasCartonAdded == true)
{
//删除CartonInfo表新增加的包装箱
CARTONINFO cartoninfo = new CARTONINFO();
cartoninfo.CARTONNO = cartonno;
pf.DeleteCARTONINFO(cartoninfo);
//删除旧Carton2RCARD表新增加的箱号
Carton2RCARD carton2rcard = new Carton2RCARD();
carton2rcard.Rcard = rCard;
carton2rcard.CartonCode = cartonno;
pf.DeleteCarton2RCARD(carton2rcard);
}
else
{
DataProvider.RollbackTransaction();
ucMessage.Add(new UserControl.Message(MessageType.Error,
"$CS_CARTON_NO :" + cartonno + "$CS_Which_MOCode_With_RCard :" + rCard + "$CS_For_Carton_No's_MOCode_Is_Different"));
txtCartonNO.TextFocus(true, true);
return;
}
}
//end
DataProvider.CommitTransaction();
ucMessage.Add(new UserControl.Message(MessageType.Success
, "$CS_RCARD_TRANSFER_CARTON_SUCCESS $CS_Param_ID =" + txtRCard.Value.Trim().ToUpper()));
txtRCard.TextFocus(true, true);
txtCartonNO.Value = String.Empty;
ClearRCardInfo();
}
catch (Exception ex)
{
DataProvider.RollbackTransaction();
ucMessage.Add(new UserControl.Message(ex));
txtCartonNO.TextFocus(true, true);
}
finally
{
(DataProvider as SQLDomainDataProvider).PersistBroker.CloseConnection();
}
#endregion
}
else
{
ucMessage.Add(new UserControl.Message(MessageType.Error, "$NoSimulation $CS_Param_ID =" + txtRCard.Value.Trim().ToUpper()));
ClearRCardInfo();
txtRCard.TextFocus(true, true);
}
#endregion
}
}
private void ucLabelEditRcard_TxtboxKeyPress(object sender, KeyPressEventArgs e)
{
if (e.KeyChar == '\r')
{
if (string.IsNullOrEmpty(this.ucLabelEditDown.Value.Trim()))
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditDown.Value + ";" + this.ucLabelEditDown.Value,
new UserControl.Message(MessageType.Error, "$CS_PleaseInputDownReason"), false);
this.ucLabelEditDown.TextFocus(false, true);
return;
}
if (string.IsNullOrEmpty(this.ucLabelEditRcard.Value.Trim()))
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditRcard.Value + ";" + this.ucLabelEditRcard.Value,
new UserControl.Message(MessageType.Error, "$CS_PleaseInputID"), false);
this.ucLabelEditRcard.TextFocus(false, true);
return;
}
//检查事件号是否超出最大范围
if (!this.CheckDownCodeLimits())
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, "" + ": " + this.ucLabelEditDownCode.Value,
new UserControl.Message(MessageType.Error, "$CS_DownCode_Out_Of_Limit"), true);
return;
}
if (_dataCollectFacade == null)
{
_dataCollectFacade = new DataCollectFacade(this.DataProvider);
}
//清除序列号中的特殊字符
string RunningCard = FormatHelper.CleanString(this.ucLabelEditRcard.Value.Trim().ToUpper());
//根据当前序列号获取产品最原始的序列号
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
string sourceRCard = dataCollectFacade.GetSourceCard(RunningCard, string.Empty);
//判断序列号在生产信息中是否存在，同时获取rcard
object objectRcard = _dataCollectFacade.GetRcardFromSimulationReport(sourceRCard);
if (objectRcard == null)
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditRcard.Value + ";" + this.ucLabelEditRcard.Value,
new UserControl.Message(MessageType.Error, "$CS_RcardInput_Wrong $NoProductInfo"), false);
this.ucLabelEditRcard.TextFocus(false, true);
return;
}
//判断序列号在生产信息中是否存在,同时获取simulation
object objectSimulationReport = _dataCollectFacade.GetLastSimulationReport(((SimulationReport)objectRcard).RunningCard.Trim().ToUpper());
if (objectSimulationReport == null)
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditRcard.Value + ";" + this.ucLabelEditRcard.Value,
new UserControl.Message(MessageType.Error, "$CS_RcardInput_Wrong $NoProductInfo"), false);
this.ucLabelEditRcard.TextFocus(false, true);
return;
}
//判断序列号在此事件号中是否重负
object objectDown = _dataCollectFacade.GetDown(FormatHelper.CleanString(this.ucLabelEditDownCode.Value.ToUpper()), ((SimulationReport)objectRcard).RunningCard.Trim().ToUpper());
if (objectDown != null)
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditRcard.Value + ";" + this.ucLabelEditRcard.Value,
new UserControl.Message(MessageType.Error, "$Error_CS_ID_Already_Exist_INHERE"), false);
this.ucLabelEditRcard.TextFocus(false, true);
return;
}
//判断序列号在其他事件号中是否存在
object[] objectDownList = _dataCollectFacade.QueryDownByRcard(((SimulationReport)objectRcard).RunningCard.Trim().ToUpper());
if (objectDownList != null)
{
for (int i = 0; i < objectDownList.Length; i++)
{
if (((Down)objectDownList[i]).DownCode != this.ucLabelEditDownCode.Value && ((Down)objectDownList[i]).DownStatus == DownStatus.DownStatus_Down)
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, RunningCard + ";" + RunningCard,
new UserControl.Message(MessageType.Error, "$Error_CS_ID_Already_Exist_INOther :" + ((Down)objectDownList[0]).DownCode), false);
this.ucLabelEditRcard.TextFocus(false, true);
return;
}
}
}
//下地号与下地原因没有关系，新建下地号
object[] objectDowns = _dataCollectFacade.QueryDown(FormatHelper.CleanString(this.ucLabelEditDownCode.Value.ToUpper()), FormatHelper.CleanString(this.ucLabelEditDown.Value.Trim().ToUpper()));
if (objectDowns == null)
{
this.ToCreateDownCode();
}
//检查事件号是否超出最大范围
if (!this.CheckDownCodeLimits())
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, "" + ": " + this.ucLabelEditDownCode.Value,
new UserControl.Message(MessageType.Error, "$CS_DownCode_Out_Of_Limit"), true);
return;
}
BaseSetting.BaseModelFacade baseModelFacade = new BaseModelFacade(this.DataProvider);
object objectRes = baseModelFacade.GetResource(ApplicationService.Current().ResourceCode.ToUpper());
string SSCode = ((Domain.BaseSetting.Resource)objectRes).StepSequenceCode;
DBDateTime NowDBDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
this.DataProvider.BeginTransaction();
try
{
Down NewDown = _dataCollectFacade.CreateNewDown();
NewDown.DownCode = FormatHelper.CleanString(this.ucLabelEditDownCode.Value.Trim());
NewDown.RCard = ((SimulationReport)objectRcard).RunningCard.Trim().ToUpper();
NewDown.MOCode = ((SimulationReport)objectSimulationReport).MOCode;
NewDown.ModelCode = ((SimulationReport)objectSimulationReport).ModelCode;
NewDown.ItemCode = ((SimulationReport)objectSimulationReport).ItemCode;
NewDown.SSCode = SSCode.Trim().ToUpper();
NewDown.ResCode = ApplicationService.Current().ResourceCode;
NewDown.DownStatus = DownStatus.DownStatus_Down;
NewDown.DownReason = FormatHelper.CleanString(this.ucLabelEditDown.Value.Trim());
NewDown.DownDate = NowDBDateTime.DBDate;
NewDown.DownShiftDate = NowDBDateTime.DBDate;
NewDown.DownTime = NowDBDateTime.DBTime;
NewDown.DownBy = ApplicationService.Current().UserCode;
NewDown.UPReason = string.Empty;
NewDown.ORGID = GlobalVariables.CurrentOrganizations.First().OrganizationID;
NewDown.UPBY = string.Empty;
NewDown.MaintainUser = ApplicationService.Current().UserCode;
NewDown.MaintainDate = NowDBDateTime.DBDate;
NewDown.MaintainTime = NowDBDateTime.DBTime;
NewDown.EAttribute1 = string.Empty;
_dataCollectFacade.AddDown(NewDown);
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditRcard.Value + ";" + this.ucLabelEditRcard.Value,
new UserControl.Message(ex), false);
}
finally
{
this.DataProvider.CommitTransaction();
this.ucLblEditNumber.Value = Convert.ToString(System.Int32.Parse(this.ucLblEditNumber.Value.Trim()) + 1);
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditRcard.Value + ";" + this.ucLabelEditRcard.Value,
new UserControl.Message(MessageType.Success, "$CS_DownIsSuccess $CS_Param_RunSeq:" + ((SimulationReport)objectRcard).RunningCard.Trim().ToUpper()), false);
}
//同步Grid
this.QueryORUpdateGrid();
this.ucLabelEditRcard.TextFocus(false, true);
}
}
private void ucButtonOK_Click(object sender, EventArgs e)
{
//获取产品原始的序列号
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
string sourceOldRCard = dataCollectFacade.GetSourceCard(this.ucLabelEditOldRCard.Value.Trim().ToUpper(), string.Empty);
string sourceNewRCard = dataCollectFacade.GetSourceCard(this.ucLabelEditNewRCard.Value.Trim().ToUpper(), string.Empty);
//check OldRcard Is Empty
if (string.IsNullOrEmpty(this.ucLabelEditOldRCard.Value.Trim()))
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditOldRCard.Value + ":" + this.ucLabelEditOldRCard.Value,
new UserControl.Message(MessageType.Error, "$CS_OLDRCARD_ISNULL"), true);
this.ucLabelEditOldRCard.TextFocus(true, true);
return;
}
//Check OldRcard Is Exist in ProductInfo
Object ObjectSimulationOld = dataCollectFacade.GetLastSimulationReport(FormatHelper.CleanString(sourceOldRCard.Trim().ToUpper()));
if (ObjectSimulationOld == null)
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditOldRCard.Value + ":" + this.ucLabelEditOldRCard.Value,
new UserControl.Message(MessageType.Error, "$CS_OLDRCARD_IS_NOT_EXIT"), true);
this.ucLabelEditOldRCard.TextFocus(false, true);
return;
}
//Check NewRcard Is Empty
if (string.IsNullOrEmpty(this.ucLabelEditNewRCard.Value.Trim()))
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditNewRCard.Value + ":" + this.ucLabelEditNewRCard.Value,
new UserControl.Message(MessageType.Error, "$CS_newIDisNull"), true);
this.ucLabelEditNewRCard.TextFocus(false, true);
return;
}
//Compare NewRcard and OldRcard Is Same
if (this.ucLabelEditNewRCard.Value.Trim() == this.ucLabelEditOldRCard.Value.Trim())
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditNewRCard.Value + ":" + this.ucLabelEditNewRCard.Value,
new UserControl.Message(MessageType.Error, "$CS_SAMERCARD"), true);
this.ucLabelEditNewRCard.TextFocus(false, true);
return;
}
//Check OldRcard Is Not Exist in ProductInfo
Object ObjectSimulationNew = dataCollectFacade.GetLastSimulationReport(FormatHelper.CleanString(sourceNewRCard.Trim().ToUpper()));
if (ObjectSimulationNew != null)
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditNewRCard.Value + ":" + this.ucLabelEditNewRCard.Value,
new UserControl.Message(MessageType.Error, "$CS_NEWRCARD_IS_PRODUCTINFO"), true);
this.ucLabelEditNewRCard.TextFocus(false, true);
return;
}
//Check ChangeReason is Empty
if (string.IsNullOrEmpty(this.ucLabelEditReason.Value.Trim()))
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditReason.Value + ":" + this.ucLabelEditReason.Value,
new UserControl.Message(MessageType.Error, "$CS_INPUT_CHANGEREASON"), true);
this.ucLabelEditReason.TextFocus(false, true);
return;
}
BaseSetting.BaseModelFacade baseModelFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider);
string OldRcard = FormatHelper.CleanString(this.ucLabelEditOldRCard.Value.Trim().ToUpper());
string NewRcard = FormatHelper.CleanString(this.ucLabelEditNewRCard.Value.Trim().ToUpper());
string OutPutResoult = string.Empty;
ProcedureCondition procedureCondition = new ProcedureCondition("CHANGERCARD",
new ProcedureParameter[] {
new ProcedureParameter("i_FromRCard", typeof(string), 40, DirectionType.Input, OldRcard),
new ProcedureParameter("i_ToRCard", typeof(string), 40, DirectionType.Input, NewRcard),
new ProcedureParameter("o_Result", typeof(string), 40, DirectionType.Output, OutPutResoult)
});
this.DataProvider.BeginTransaction();
try
{
baseModelFacade.DoRCardChange(ref procedureCondition);
if (procedureCondition.Parameters[2].Value.ToString().Length == 2)
{
DBDateTime DBDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
RCardChange NewRCardChange = baseModelFacade.CreateNewRCardChange();
NewRCardChange.RCardFrom = OldRcard;
NewRCardChange.RCardTo = NewRcard;
NewRCardChange.Reason = FormatHelper.CleanString(this.ucLabelEditReason.Value.Trim());
NewRCardChange.MaintainUser = ApplicationService.Current().UserCode;
NewRCardChange.MaintainDate = DBDateTime.DBDate;
NewRCardChange.MaintainTime = DBDateTime.DBTime;
NewRCardChange.EAttribute1 = string.Empty;
baseModelFacade.AddRCardChange(NewRCardChange);
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, procedureCondition.Parameters[2].Value.ToString(),
new UserControl.Message(MessageType.Success, "$CS_RCARDCHANGE_SUCCESS"), true);
this.ucLabelEditNewRCard.Value = string.Empty;
this.ucLabelEditReason.Value = string.Empty;
}
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, "", new UserControl.Message(ex), true);
}
finally
{
this.DataProvider.CommitTransaction();
}
if (procedureCondition.Parameters[2].Value.ToString().Length > 2)
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, procedureCondition.Parameters[2].Value.ToString(),
new UserControl.Message(MessageType.Error, "$CS_RCARDCHANGE_WRONG"), true);
}
this.ucLabelEditOldRCard.TextFocus(false, true);
}
/// <summary>
/// 成品入库检查
/// </summary>
/// <returns>true/false</returns>
private bool CheckStackAndRcardInfo(string rcard, string stackCode, string itemCode, string palletCode, string companyCode, string storageCode)
{
DataCollectFacade dcFacade = new DataCollectFacade(this.DataProvider);
SimulationReport report = dcFacade.GetLastSimulationReport(rcard);
if (report != null)
{
if (!report.ItemCode.Equals(itemCode))
{
//Message:产品序列号所对应的物料与输入物料不对应
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_PRODUCT_ITEM_NOT_SAME $ITEM_CODE=" + report.ItemCode));
return(false);
}
}
////Check从垛位使用状况的页面带过来的垛位和库位
//if (!this.CheckSelecetedStackAndStorage(this.SelectedStorage, this.SelectedStack, Convert.ToString(this.ucLabelComboxINVType.SelectedItemValue)))
//{
// return false;
//}
//else
//{
//Check序列号对应的料号是否和垛位的不一样
InventoryFacade inventoryFacade = new InventoryFacade(this.DataProvider);
object[] objStackToRcards = inventoryFacade.GetAnyStack2RCardByStack(stackCode);
if (objStackToRcards != null)
{
if (inventoryFacade.CheckStackIsOnlyAllowOneItem(stackCode) && !((StackToRcard)objStackToRcards[0]).ItemCode.Equals(itemCode))
{
//垛位的料号和当前产品的料号不一至
//ucMessage1.AddEx(this._FunctionName, this.opsetPackObject.CheckedItem.DisplayText + ": " + this.txtRCard.Value + ";料号:" + this.txtItemCode.Value, new UserControl.Message(MessageType.Error, "$CS_STACK_AND_PRODUCT_ITEM_NOT_SAME"), true);
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_STACK_AND_PRODUCT_ITEM_NOT_SAME $ITEM_CODE=" + itemCode));
return(false);
}
}
//Check 序列号是否已经入过库
object objStarckToRcard = inventoryFacade.GetStackToRcard(rcard);
if (objStarckToRcard != null)
{
//序列号重复入库
//ucMessage1.AddEx(this._FunctionName, "序列号" + ": " + this.txtRCard.Value, new UserControl.Message(MessageType.Error, "$CS_SERIAL_EXIST"), true);
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_SERIAL_EXIST $SERIAL_NO=" + rcard));
return(false);
}
//}
//Check 序列号是否已经在其他栈板上
PackageFacade objPFFacade = new PackageFacade(this.DataProvider);
object objPallet2RCard = objPFFacade.GetPallet2RCardByRCard(rcard);
if (objPallet2RCard != null)
{
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_RCARD_EXIST_IN_PALLET " + ((Pallet2RCard)objPallet2RCard).PalletCode));
return(false);
}
//Check栈板(如果入栈板,而且栈板在系统中已经存在)的公司别,产品别和产品等级是否和当前的一致
if (palletCode.Length > 0)
{
object[] objStackToRcardList = inventoryFacade.GetStackToRcardInfoByPallet(palletCode);
if (objStackToRcardList != null)
{
string strErrorMessage = string.Empty;
StackToRcard obj = (StackToRcard)objStackToRcardList[0];
if (obj.ItemCode != itemCode)
{
strErrorMessage = strErrorMessage + "itemcode";
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_ITEM_NOT_SAME_IN_PALLET=" + obj.ItemCode));
}
if (obj.Company != companyCode)
{
strErrorMessage = strErrorMessage + "companycode";
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_COMPANY_NOT_SAME_IN_PALLET=" + obj.Company));
}
//if (obj.ItemGrade != itemGrade)
//{
// //ApplicationRun.GetInfoForm().Add(
// //new UserControl.Message(MessageType.Error, "$CS_RCARD_EXIST_IN_PALLET" + ((Pallet2RCard)objPallet2RCard).PalletCode));
// //return false;
// strErrorMessage = strErrorMessage + "itemgrade";
// ApplicationRun.GetInfoForm().Add(
// new UserControl.Message(MessageType.Error, "$CS_ITEMGRADE_NOT_SAME_IN_PALLET=" + obj.ItemGrade));
//}
if (strErrorMessage != string.Empty)
{
return(false);
}
}
else
{
if (!inventoryFacade.CheckStackCapacity(storageCode, stackCode))
{
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_STACK_CAPACITY_FULL"));
return(false);
}
}
}
//Check 出库的产品和当前选择的产品不一致
object[] outTransList = inventoryFacade.GetInvOutTransaction(rcard, "");
if (outTransList != null)
{
if (!((InvOutTransaction)outTransList[0]).ItemCode.Equals(itemCode))
{
//Message:出库的产品:XXXXXXXXXXX和当前选择的产品不一致,是否继续使用当前选择的产品
if (MessageBox.Show(UserControl.MutiLanguages.ParserMessage("$CS_OUT_INV_ITEM_NOT_SAME") + "=" + ((InvOutTransaction)outTransList[0]).ItemCode + "," + UserControl.MutiLanguages.ParserMessage("$CS_OUT_INV_ITEM_NOT_SAME_ASK") + "?", UserControl.MutiLanguages.ParserMessage("$CS_CONFIRM"), MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
{
return(false);
}
}
}
if (!this.CheckRule(rcard))
{
return(false);
}
return(true);
}
