public void CanAdd100NodesToClipboardAndPaste3Times()
{
int numNodes = 100;
// create 100 nodes, and select them as you go
for (int i = 0; i < numNodes; i++)
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
Assert.AreEqual(i + 1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
CurrentDynamoModel.AddToSelection(CurrentDynamoModel.CurrentWorkspace.Nodes.Last());
Assert.AreEqual(i + 1, DynamoSelection.Instance.Selection.Count);
}
CurrentDynamoModel.Copy();
Assert.AreEqual(numNodes, CurrentDynamoModel.ClipBoard.Count);
int numPastes = 3;
for (int i = 1; i <= numPastes; i++)
{
CurrentDynamoModel.Paste();
Assert.AreEqual(numNodes, CurrentDynamoModel.ClipBoard.Count);
Assert.AreEqual(numNodes * (i + 1), CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
}
}
public void CanCopydAndPaste2NodesWithRightOffset()
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
addNode.Height = 2;
addNode.Width = 2;
addNode.CenterX = 3;
addNode.CenterY = 2;
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
CurrentDynamoModel.AddToSelection(addNode);
addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
addNode.Height = 2;
addNode.Width = 2;
addNode.CenterX = 6;
addNode.CenterY = 8;
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
CurrentDynamoModel.AddToSelection(addNode);
CurrentDynamoModel.Copy();
Assert.AreEqual(2, CurrentDynamoModel.ClipBoard.Count);
CurrentDynamoModel.Paste();
Assert.AreEqual(4, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.AreEqual(17, CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(2).X);
Assert.AreEqual(17, CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(2).Y);
Assert.AreEqual(20, CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(3).X);
Assert.AreEqual(23, CurrentDynamoModel.CurrentWorkspace.Nodes.ElementAt(3).Y);
}
public void Defect_MAGN_2375_3487()
{
// This test case is addressing the following two defects:
// Details are available in http://adsk-oss.myjetbrains.com/youtrack/issue/MAGN-2375
// and http://adsk-oss.myjetbrains.com/youtrack/issue/MAGN-3487
RunModel(@"core\dsevaluation\Defect_MAGN_2375_3487.dyn");
// check all the nodes and connectors are loaded
Assert.AreEqual(3, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.AreEqual(2, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
CurrentDynamoModel.AddToSelection(CurrentDynamoModel.CurrentWorkspace.NodeFromWorkspace
("5a7f7549-fbef-4c3f-8578-c67471eaa87f"));
CurrentDynamoModel.Copy();
CurrentDynamoModel.Paste();
Assert.AreEqual(4, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.AreEqual(4, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
//run the graph after copy paste
BeginRun();
var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes.OfType <DSVarArgFunction>();
foreach (var item in nodes)
{
AssertPreviewValue(item.GUID.ToString(), new string[] { "Dynamo", "DS" });
}
}
public void CanCopydAndPasteAndUndoPythonEngine()
{
var pyNode = new PythonNode();
CurrentDynamoModel.ExecuteCommand(new Dynamo.Models.DynamoModel.CreateNodeCommand(pyNode, 0, 0, false, false));
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
pyNode.EngineName = PythonEngineManager.CPython3EngineName;
CurrentDynamoModel.AddToSelection(pyNode);
CurrentDynamoModel.Copy();
Assert.AreEqual(1, CurrentDynamoModel.ClipBoard.Count);
CurrentDynamoModel.Paste();
Assert.AreEqual(2, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.IsTrue(CurrentDynamoModel.CurrentWorkspace.Nodes.OfType <PythonNode>().All(x => x.EngineName == PythonEngineManager.CPython3EngineName));
CurrentDynamoModel.ExecuteCommand(new UndoRedoCommand(UndoRedoCommand.Operation.Undo));
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
pyNode.EngineName = PythonEngineManager.IronPython2EngineName;
CurrentDynamoModel.ExecuteCommand(
new UpdateModelValueCommand(
Guid.Empty, pyNode.GUID, nameof(PythonNode.EngineName), PythonEngineManager.CPython3EngineName));
Assert.AreEqual(pyNode.EngineName, PythonEngineManager.CPython3EngineName);
CurrentDynamoModel.ExecuteCommand(new UndoRedoCommand(UndoRedoCommand.Operation.Undo));
Assert.AreEqual(pyNode.EngineName, PythonEngineManager.IronPython2EngineName);
}
public void CanCopyAndPasteAndUndoOutputState()
{
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(addNode, false);
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
addNode.IsSetAsOutput = true;
CurrentDynamoModel.AddToSelection(addNode);
Assert.AreEqual(1, DynamoSelection.Instance.Selection.Count);
CurrentDynamoModel.Copy();
Assert.AreEqual(1, CurrentDynamoModel.ClipBoard.Count);
CurrentDynamoModel.Paste();
Assert.AreEqual(2, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.IsTrue(CurrentDynamoModel.CurrentWorkspace.Nodes.All(x => x.IsSetAsOutput));
CurrentDynamoModel.CurrentWorkspace.Undo();
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
addNode.IsSetAsOutput = false;
CurrentDynamoModel.ExecuteCommand(
new DynCmd.UpdateModelValueCommand(
Guid.Empty, addNode.GUID, nameof(NodeModel.IsSetAsOutput), "true"));
Assert.IsTrue(addNode.IsSetAsOutput);
CurrentDynamoModel.CurrentWorkspace.Undo();
Assert.IsFalse(addNode.IsSetAsOutput);
}
public void CanCopyAndPasteAndUndoInputState()
{
var numberNode = new DoubleInput();
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(numberNode, false);
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
numberNode.IsSetAsInput = true;
CurrentDynamoModel.AddToSelection(numberNode);
Assert.AreEqual(1, DynamoSelection.Instance.Selection.Count);
CurrentDynamoModel.Copy();
Assert.AreEqual(1, CurrentDynamoModel.ClipBoard.Count);
CurrentDynamoModel.Paste();
Assert.AreEqual(2, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.IsTrue(CurrentDynamoModel.CurrentWorkspace.Nodes.All(x => x.IsSetAsInput));
CurrentDynamoModel.CurrentWorkspace.Undo();
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
numberNode.IsSetAsInput = false;
CurrentDynamoModel.ExecuteCommand(
new DynCmd.UpdateModelValueCommand(
Guid.Empty, numberNode.GUID, nameof(NodeModel.IsSetAsInput), "true"));
Assert.IsTrue(numberNode.IsSetAsInput);
CurrentDynamoModel.CurrentWorkspace.Undo();
Assert.IsFalse(numberNode.IsSetAsInput);
}
public void DelayedExecutionOnCopyPaste()
{
DynamoSelection.Instance.ClearSelection();
workspaceNodes().ForEach((ele) => DynamoSelection.Instance.Selection.Add(ele));
CurrentDynamoModel.Copy();
activateTaskCounter(originalNodeCount * 2);
CurrentDynamoModel.Paste();
Assert.AreEqual(wModel.Nodes.Count(), originalNodeCount * 2);
Assert.AreEqual(taskCounter, 1);
deactivateTaskCounter();
}
public void TestCopyPasteGroup_IfItsNodeDeletedAfterCopying()
{
//Add a Node
var ws = CurrentDynamoModel.CurrentWorkspace;
var addNode = new DSFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor("+"));
ws.AddAndRegisterNode(addNode);
Assert.AreEqual(ws.Nodes.Count(), 1);
//Add a Note
var addNote = ws.AddNote(false, 200, 200, "This is a test note", Guid.NewGuid());
Assert.AreEqual(ws.Notes.Count(), 1);
//Select the node and notes
DynamoSelection.Instance.Selection.Add(addNode);
DynamoSelection.Instance.Selection.Add(addNote);
//create the group around selected nodes and notes
var groupId = Guid.NewGuid();
var annotation = ws.AddAnnotation("This is a test group", groupId);
Assert.AreEqual(ws.Annotations.Count(), 1);
Assert.AreNotEqual(0, annotation.Width);
//Add the group selection
DynamoSelection.Instance.Selection.Add(annotation);
//Copy the group
CurrentDynamoModel.Copy();
var modelToDelete = new List <ModelBase> {
addNode
};
//Delete the node
CurrentDynamoModel.DeleteModelInternal(modelToDelete);
// only the note should remain
Assert.AreEqual(1, annotation.SelectedModels.Count());
//paste the group
CurrentDynamoModel.Paste();
//there should be 2 groups in the workspace
Assert.AreEqual(ws.Annotations.Count(), 2);
var pastedGroup = ws.Annotations.First(g => g != annotation);
// group has been copied with 1 node and 1 note
Assert.AreEqual(2, pastedGroup.SelectedModels.Count());
}
public void MAGN_5029_CopyPasteWarning()
{
// Details are available in defect
// http://adsk-oss.myjetbrains.com/youtrack/issue/MAGN-5029
// Cutting and pasting Curve.PointAtParameter in run automatically
// causes "variable has not yet been defined" warning message
string openPath = Path.Combine(TestDirectory,
@"core\WorkflowTestFiles\\GeometryDefects\MAGN_5029_CopyPasteWarning.dyn");
RunModel(openPath);
AssertNoDummyNodes();
// check all the nodes and connectors are loaded
Assert.AreEqual(4, CurrentDynamoModel.CurrentWorkspace.Nodes.Count);
Assert.AreEqual(5, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
//CGet Curve.PointAtParameter node and copy paste it.
string nodeID = "de3e5067-d7e2-4e47-aca3-7f2531614892";
var pointAtParameterNode = CurrentDynamoModel.CurrentWorkspace.NodeFromWorkspace(nodeID);
// Copy and paste the PointAtParameter Node
CurrentDynamoModel.AddToSelection(pointAtParameterNode);
CurrentDynamoModel.Copy(); // Copy the selected node.
CurrentDynamoModel.Paste(); // Paste the copied node.
RunCurrentModel();
// check all the nodes and connectors are updated
Assert.AreEqual(5, CurrentDynamoModel.CurrentWorkspace.Nodes.Count);
Assert.AreEqual(7, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
// Make sure we are able to get copy pasted PointAtParameter node.
var newPointAtPArameterNode = CurrentDynamoModel.CurrentWorkspace.Nodes[4];
var guid = newPointAtPArameterNode.GUID.ToString();
// Checking there is no Warning or Error on node after copy paste.
Assert.AreNotEqual(ElementState.Error, newPointAtPArameterNode.State);
Assert.AreNotEqual(ElementState.Warning, newPointAtPArameterNode.State);
AssertPreviewCount(guid, 10);
for (int i = 0; i <= 9; i++)
{
var extractedCurves = GetPreviewValueAtIndex(guid, i) as Point;
Assert.IsNotNull(extractedCurves);
}
}
public void PasteInputAndOutputNodeInHomeWorkspace()
{
const string name = "Custom Node Creation Test";
const string description = "Description";
const string category = "Custom Node Category";
CurrentDynamoModel.ExecuteCommand(new DynamoModel.CreateCustomNodeCommand(
Guid.NewGuid(),
name,
category,
description,
true));
CurrentDynamoModel.ExecuteCommand(new DynamoModel.CreateNodeCommand(
new Symbol(),
0, 0,
true, true));
CurrentDynamoModel.ExecuteCommand(new DynamoModel.CreateNodeCommand(
new Output(),
0, 0,
true, true));
foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
{
CurrentDynamoModel.AddToSelection(node);
}
CurrentDynamoModel.Copy();
var home = CurrentDynamoModel.Workspaces.OfType <HomeWorkspaceModel>().FirstOrDefault();
Assert.NotNull(home);
SelectTabByGuid(home.Guid);
CurrentDynamoModel.Paste();
var homeNodes = home.Nodes;
Assert.AreEqual(2, homeNodes.Count());
Assert.IsInstanceOf <CodeBlockNodeModel>(homeNodes.ElementAt(0));
Assert.IsInstanceOf <CodeBlockNodeModel>(homeNodes.ElementAt(1));
}
public void DelayedExecutionUndoRedoTest()
{
DynamoSelection.Instance.ClearSelection();
workspaceNodes().ForEach((ele) => DynamoSelection.Instance.Selection.Add(ele));
CurrentDynamoModel.Copy();
CurrentDynamoModel.Paste();
Assert.AreEqual(wModel.Nodes.Count(), originalNodeCount * 2);
CurrentDynamoModel.ExecuteCommand(new UndoRedoCommand(UndoRedoCommand.Operation.Undo));
Assert.AreEqual(wModel.Nodes.Count(), originalNodeCount);
activateTaskCounter(originalNodeCount);
CurrentDynamoModel.ExecuteCommand(new UndoRedoCommand(UndoRedoCommand.Operation.Redo));
Assert.AreEqual(wModel.Nodes.Count(), originalNodeCount * 2);
Assert.AreEqual(taskCounter, 1);
deactivateTaskCounter();
CurrentDynamoModel.ExecuteCommand(new UndoRedoCommand(UndoRedoCommand.Operation.Undo));
Assert.IsTrue(wModel.Nodes.Count() == originalNodeCount);
}
public void TestCopyPasteNestedGroup()
{
// Arrange
var nestedGroupTitle = "Nested Group";
var parentGroupNode = new DummyNode();
var nestedGroupNode = new DummyNode();
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(parentGroupNode, false);
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(nestedGroupNode, false);
// Created nested group
DynamoSelection.Instance.Selection.Add(nestedGroupNode);
var nestedGroupId = Guid.NewGuid();
var nestedGroup = CurrentDynamoModel.CurrentWorkspace.AddAnnotation(nestedGroupTitle, "A group inside another group", nestedGroupId);
// Create parent group
var parentGroup = new AnnotationModel(
new NodeModel[] { parentGroupNode },
new NoteModel[] { },
new AnnotationModel[] { nestedGroup });
CurrentDynamoModel.CurrentWorkspace.AddAnnotation(parentGroup);
// Act
DynamoSelection.Instance.Selection.Add(nestedGroup);
CurrentDynamoModel.Copy();
CurrentDynamoModel.Paste();
var copiedGroups = CurrentDynamoModel.CurrentWorkspace.Annotations
.Where(x => x.AnnotationText == nestedGroupTitle);
var copiedGroup = copiedGroups.Where(x => x.GUID != nestedGroupId);
// Assert
Assert.That(parentGroup.Nodes.Contains(nestedGroup));
Assert.That(CurrentDynamoModel.CurrentWorkspace.Annotations.Count() == 3);
Assert.That(copiedGroups.Count() == 2);
Assert.That(copiedGroup.Count() == 1);
Assert.IsFalse(parentGroup.Nodes.Contains(copiedGroup.FirstOrDefault()));
}
public void CanCopyPasteJSONDummyNodeAndRetainsOriginalJSON()
{
string openPath = Path.Combine(TestDirectory, testFileWithDummyNode);
OpenModel(openPath);
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.OfType <DummyNode>().Count());
//select the dummy node
CurrentDynamoModel.AddToSelection(CurrentDynamoModel.CurrentWorkspace.Nodes.OfType <DummyNode>().First());
CurrentDynamoModel.Copy();
CurrentDynamoModel.Paste();
//get both dummyNodes
Assert.AreEqual(2, CurrentDynamoModel.CurrentWorkspace.Nodes.OfType <DummyNode>().Count());
var dummies = CurrentDynamoModel.CurrentWorkspace.Nodes.OfType <DummyNode>().ToList();
var oc1 = (dummies[0].OriginalNodeContent as JObject).ToString();
var oc2 = (dummies[1].OriginalNodeContent as JObject).ToString();
Console.WriteLine(oc1);
Console.WriteLine(oc2);
//assert that originalData are the same string
Assert.AreEqual(oc1, oc2);
}
public void CanCopyAndPasteDSVarArgFunctionNode()
{
Assert.AreEqual(0, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
const string dsVarArgFunctionName = "DSCore.String.Split@string,string[]";
var node = new DSVarArgFunction(CurrentDynamoModel.LibraryServices.GetFunctionDescriptor(dsVarArgFunctionName));
CurrentDynamoModel.CurrentWorkspace.AddAndRegisterNode(node, false);
// Here we check to see if we do get a DSVarArgFunction node (which
// is what this test case is written for, other nodes will render the
// test case meaningless).
//
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
CurrentDynamoModel.AddToSelection(node); // Select the only DSVarArgFunction node.
CurrentDynamoModel.Copy(); // Copy the only DSVarArgFunction node.
Assert.DoesNotThrow(() =>
{
CurrentDynamoModel.Paste(); // Nope, paste should not crash Dynamo.
});
}
