private void 生成等值线ToolStripMenuItem1_Click(object sender, EventArgs e)
{
this.ShowContourLine = (this.生成等值线ToolStripMenuItem1.Checked == true);
if (this.ShowContourLine == false)
{
this.agisControl.Refresh(); return;
}
ContourLineSettingForm settingForm = new ContourLineSettingForm();
if (settingForm.ShowDialog(this) == DialogResult.OK)
{
//生成Tin
CreateTIN createTin = new CreateTIN(this.mPointSet);
Edge[] tinEdges = createTin.PointByPointInsertion2();
TinEdges = tinEdges;
TriangleSet triSet = EdgeSet.TopologyGenerateTriangleSet(tinEdges, mPointSet);
Triangle[] triList = triSet.TriangleList.ToArray();
List <Edge> contourLinesList = new List <Edge>();
//计算等值线条数
int lineCount = (int)((settingForm.MaxValue - settingForm.MinValue) / settingForm.IntervalValue);
for (int i = 0; i <= lineCount; i++)
{
for (int j = 0; j < triList.Length; j++)
{
Edge contourLine = triList[j].GetContourLine(settingForm.MaxValue - i * settingForm.IntervalValue);
if (contourLine != null)
{
contourLinesList.Add(contourLine);
}
}
this.TinContourLineList = contourLinesList.ToArray();
}
}
TinContourLinePen.DashStyle = System.Drawing.Drawing2D.DashStyle.Dash;
agisControl.Refresh();
}
private void 生成等值线ToolStripMenuItem_Click(object sender, EventArgs e)
{
if (this.UserOperation != UserOperationType.DisplayInGrid)
{
MessageBox.Show("当前并没有在格网下显示，请先生成网格！", "提示"); return;
}
else if (this.agisControl.GridIntMethod == Mehtod.GridInterpolationMehtod.None)
{
MessageBox.Show("尚未选择格网插值方法！\r\n请在“格网模型”中选择“距离平方倒数法”或“按方位加权平均法”！", "提示"); return;
}
else
{
this.生成等值线ToolStripMenuItem.Checked = (this.生成等值线ToolStripMenuItem.Checked == false);
this.ShowContourLine = (this.生成等值线ToolStripMenuItem.Checked == true);
if (this.ShowContourLine == false)
{
this.agisControl.Refresh(); return;
}
ContourLineSettingForm settingForm = new ContourLineSettingForm();
if (settingForm.ShowDialog(this) == DialogResult.OK)
{
//生成格网矩阵
List <Edge> tempGridContourLineList = new List <Edge>();
List <ContourPolyline> tempContourPolylineList = new List <ContourPolyline>();
ContourPolylineSet tempContourPolyline = new ContourPolylineSet();
//计算等值线条数
int lineCount = (int)((settingForm.MaxValue - settingForm.MinValue) / settingForm.IntervalValue);
for (int k = 0; k <= lineCount; k++)
{
double tempElevation = settingForm.MaxValue - k * settingForm.IntervalValue;
double[,] GridRealLoc = GridPointPositionMatrix();
double[,] tempHH = 内插等值点_HH(tempElevation);
double[,] tempSS = 内插等值点_SS(tempElevation);
int Grid_Count_all_X = this.EachGridDivisionCount_X * this.GridDivisionCount_X;
int Grid_Count_all_Y = this.EachGridDivisionCount_Y * this.GridDivisionCount_Y;
for (int i = 0; i < Grid_Count_all_X; i++)
{
for (int j = 0; j < Grid_Count_all_Y; j++)
{
List <DataPoint> tempPointList = new List <DataPoint>();
//横边有等值点
if (tempHH[i, j] < 2)
{
tempPointList.Add(new DataPoint(-i * 1000 - j, "等值点" + (-i * 1000 - j).ToString(),
Grid_AxisX[i] + tempHH[i, j] * (Grid_AxisX[i + 1] - Grid_AxisX[i]),
Grid_AxisY[j], tempElevation, (-i * 1000 - j) * 1000 + (int)tempElevation));
}
//竖边有等值点
if (tempSS[i, j] < 2)
{
tempPointList.Add(new DataPoint(i * 1000 + j, "等值点" + (i * 1000 + j).ToString(),
Grid_AxisX[i],
Grid_AxisY[j] + tempSS[i, j] * (Grid_AxisY[j + 1] - Grid_AxisY[j]),
tempElevation, (i * 1000 + j) * 1000 + (int)tempElevation));
}
//另一条横边有等值点
if (tempHH[i, j + 1] < 2)
{
tempPointList.Add(new DataPoint(-i * 1000 - j - 1, "等值点" + (-i * 1000 - j - 1).ToString(),
Grid_AxisX[i] + tempHH[i, j + 1] * (Grid_AxisX[i + 1] - Grid_AxisX[i]),
Grid_AxisY[j + 1], tempElevation, (-i * 1000 - j - 1) * 1000 + (int)tempElevation));
}
//另一条竖边有等值点
if (tempSS[i + 1, j] < 2)
{
tempPointList.Add(new DataPoint((i + 1) * 1000 + j, "等值点" + ((1 + i) * 1000 + j).ToString(),
Grid_AxisX[i + 1],
Grid_AxisY[j] + tempSS[i + 1, j] * (Grid_AxisY[j + 1] - Grid_AxisY[j]),
tempElevation, ((i + 1) * 1000 + j) * 1000 + (int)tempElevation));
}
if (tempPointList.Count < 2)//无等值线
{
continue;
}
else if (tempPointList.Count < 4)
{
tempGridContourLineList.Add(new Edge(tempPointList[0], tempPointList[1]));
}
else
{
tempGridContourLineList.Add(new Edge(tempPointList[0], tempPointList[1]));
tempGridContourLineList.Add(new Edge(tempPointList[2], tempPointList[3]));
}
}
}
tempContourPolyline = EdgeSet.TopologyGenerateContourPolylineSet(tempGridContourLineList.ToArray());
/*另一种方法
* GridCreateContourLine CreateContourLineClass = new GridCreateContourLine(this.Grid_AxisX, this.Grid_AxisY,
* tempHH, tempSS, Grid_Count_all_X, Grid_Count_all_Y, tempElevation);
* tempContourPolylineList = CreateContourLineClass.CreateContourLines();
*/
}
//this.GridContourList = tempGridContourLineList.ToArray();
this.GridContourPolylineList = tempContourPolyline.ContourPolylineList.ToArray();
}
//GridContourLinePen.DashStyle = System.Drawing.Drawing2D.DashStyle.DashDot;
agisControl.Refresh();
}
}