private void bug_Click()
{
UiThread.RunOnIdle(() =>
{
ContactFormWindow.Open();
});
}
bool bug_Click()
{
UiThread.RunOnIdle((state) =>
{
ContactFormWindow.Open();
});
return(true);
}
public bool IsValid()
{
try
{
if (LayerHeight > NozzleDiameter)
{
string error = new LocalizedString("'Layer Height' must be less than or equal to the 'Nozzle Diameter'.").Translated;
string details = string.Format("Layer Height = {0}\nNozzle Diameter = {1}", LayerHeight, NozzleDiameter);
string location = new LocalizedString("Location: 'Advanced Controls' -> 'Slice Settings' -> 'Print' -> 'Layers/Perimeters'").Translated;
StyledMessageBox.ShowMessageBox(string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error");
return(false);
}
else if (FirstLayerHeight > NozzleDiameter)
{
string error = new LocalizedString("First Layer Height' must be less than or equal to the 'Nozzle Diameter'.").Translated;
string details = string.Format("First Layer Height = {0}\nNozzle Diameter = {1}", FirstLayerHeight, NozzleDiameter);
string location = "Location: 'Advanced Controls' -> 'Slice Settings' -> 'Print' -> 'Layers/Perimeters'";
StyledMessageBox.ShowMessageBox(string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error");
return(false);
}
if (MinFanSpeed > 100)
{
string error = "The Min Fan Speed can only go as high as 100%.";
string details = string.Format("It is currently set to {0}.", MinFanSpeed);
string location = "Location: 'Advanced Controls' -> 'Slice Settings' -> 'Fillament' -> 'Cooling' (show all settings)";
StyledMessageBox.ShowMessageBox(string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error");
return(false);
}
if (MaxFanSpeed > 100)
{
string error = "The Max Fan Speed can only go as high as 100%.";
string details = string.Format("It is currently set to {0}.", MaxFanSpeed);
string location = "Location: 'Advanced Controls' -> 'Slice Settings' -> 'Fillament' -> 'Cooling' (show all settings)";
StyledMessageBox.ShowMessageBox(string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error");
return(false);
}
}
catch (Exception e)
{
string stackTraceNoBackslashRs = e.StackTrace.Replace("\r", "");
ContactFormWindow.Open("Parse Error while slicing", e.Message + stackTraceNoBackslashRs);
return(false);
}
return(true);
}
protected override IEnumerable <MenuItemAction> GetMenuItems()
{
return(new List <MenuItemAction>
{
new MenuItemAction("Getting Started".Localize(), () => MatterControlApplication.Instance.LaunchBrowser("http://www.mattercontrol.com/articles/mattercontrol-getting-started")),
new MenuItemAction("View Help".Localize(), () => MatterControlApplication.Instance.LaunchBrowser("http://www.mattercontrol.com/articles")),
new MenuItemAction("Release Notes".Localize(), () => MatterControlApplication.Instance.LaunchBrowser("http://wiki.mattercontrol.com/Release_Notes")),
new MenuItemAction("User Manual".Localize(), () => MatterControlApplication.Instance.LaunchBrowser("http://wiki.mattercontrol.com")),
new MenuItemAction("------------------------", null),
new MenuItemAction("Report a Bug".Localize(), () => ContactFormWindow.Open()),
new MenuItemAction("Check For Update".Localize(), () =>
{
ApplicationMenuRow.AlwaysShowUpdateStatus = true;
UpdateControlData.Instance.CheckForUpdateUserRequested();
CheckForUpdateWindow.Show();
}),
new MenuItemAction("------------------------", null),
new MenuItemAction("About MatterControl".Localize(), () => AboutWindow.Show()),
});
}
private void AddContent(HtmlParser htmlParser, string htmlContent)
{
ElementState elementState = htmlParser.CurrentElementState;
string decodedHtml = HtmlParser.UrlDecode(htmlContent);
switch (elementState.TypeName)
{
case "p":
{
elementsUnderConstruction.Push(new FlowLayoutWidget());
elementsUnderConstruction.Peek().Name = "p";
elementsUnderConstruction.Peek().HAnchor = HAnchor.ParentLeftRight;
if (decodedHtml != null && decodedHtml != "")
{
WrappingTextWidget content = new WrappingTextWidget(decodedHtml, pointSize: elementState.PointSize, textColor: ActiveTheme.Instance.PrimaryTextColor);
//content.VAnchor = VAnchor.ParentTop;
elementsUnderConstruction.Peek().AddChild(content);
}
}
break;
case "div":
{
elementsUnderConstruction.Push(new FlowLayoutWidget());
elementsUnderConstruction.Peek().Name = "div";
if (decodedHtml != null && decodedHtml != "")
{
TextWidget content = new TextWidget(decodedHtml, pointSize: elementState.PointSize, textColor: ActiveTheme.Instance.PrimaryTextColor);
elementsUnderConstruction.Peek().AddChild(content);
}
}
break;
case "!DOCTYPE":
break;
case "body":
break;
case "img":
{
ImageBuffer image = new ImageBuffer(elementState.SizeFixed.x, elementState.SizeFixed.y, 32, new BlenderBGRA());
ImageWidget_AsyncLoadOnDraw imageWidget = new ImageWidget_AsyncLoadOnDraw(image, elementState.src);
// put the image into the widget when it is done downloading.
if (elementsUnderConstruction.Peek().Name == "a")
{
Button linkButton = new Button(0, 0, imageWidget);
linkButton.Cursor = Cursors.Hand;
linkButton.Click += (sender, mouseEvent) =>
{
MatterControlApplication.Instance.LaunchBrowser(elementState.Href);
};
elementsUnderConstruction.Peek().AddChild(linkButton);
}
else
{
elementsUnderConstruction.Peek().AddChild(imageWidget);
}
}
break;
case "a":
{
elementsUnderConstruction.Push(new FlowLayoutWidget());
elementsUnderConstruction.Peek().Name = "a";
if (decodedHtml != null && decodedHtml != "")
{
Button linkButton = linkButtonFactory.Generate(decodedHtml);
StyledTypeFace styled = new StyledTypeFace(LiberationSansFont.Instance, elementState.PointSize);
double descentInPixels = styled.DescentInPixels;
linkButton.OriginRelativeParent = new VectorMath.Vector2(linkButton.OriginRelativeParent.x, linkButton.OriginRelativeParent.y + descentInPixels);
linkButton.Click += (sender, mouseEvent) =>
{
MatterControlApplication.Instance.LaunchBrowser(elementState.Href);
};
elementsUnderConstruction.Peek().AddChild(linkButton);
}
}
break;
case "table":
break;
case "td":
case "span":
GuiWidget widgetToAdd;
if (elementState.Classes.Contains("translate"))
{
decodedHtml = decodedHtml.Localize();
}
if (elementState.Classes.Contains("toUpper"))
{
decodedHtml = decodedHtml.ToUpper();
}
if (elementState.Classes.Contains("versionNumber"))
{
decodedHtml = VersionInfo.Instance.ReleaseVersion;
}
if (elementState.Classes.Contains("buildNumber"))
{
decodedHtml = VersionInfo.Instance.BuildVersion;
}
Button createdButton = null;
if (elementState.Classes.Contains("centeredButton"))
{
createdButton = textImageButtonFactory.Generate(decodedHtml);
widgetToAdd = createdButton;
}
else if (elementState.Classes.Contains("linkButton"))
{
double oldFontSize = linkButtonFactory.fontSize;
linkButtonFactory.fontSize = elementState.PointSize;
createdButton = linkButtonFactory.Generate(decodedHtml);
StyledTypeFace styled = new StyledTypeFace(LiberationSansFont.Instance, elementState.PointSize);
double descentInPixels = styled.DescentInPixels;
createdButton.OriginRelativeParent = new VectorMath.Vector2(createdButton.OriginRelativeParent.x, createdButton.OriginRelativeParent.y + descentInPixels);
widgetToAdd = createdButton;
linkButtonFactory.fontSize = oldFontSize;
}
else
{
TextWidget content = new TextWidget(decodedHtml, pointSize: elementState.PointSize, textColor: ActiveTheme.Instance.PrimaryTextColor);
widgetToAdd = content;
}
if (createdButton != null)
{
if (elementState.Id == "sendFeedback")
{
createdButton.Click += (sender, mouseEvent) => { ContactFormWindow.Open(); };
}
else if (elementState.Id == "clearCache")
{
createdButton.Click += (sender, mouseEvent) => { AboutWidget.DeleteCacheData(); };
}
}
if (elementState.VerticalAlignment == ElementState.VerticalAlignType.top)
{
widgetToAdd.VAnchor = VAnchor.ParentTop;
}
elementsUnderConstruction.Peek().AddChild(widgetToAdd);
break;
case "tr":
elementsUnderConstruction.Push(new FlowLayoutWidget());
elementsUnderConstruction.Peek().Name = "tr";
if (elementState.SizePercent.y == 100)
{
elementsUnderConstruction.Peek().VAnchor = VAnchor.ParentBottomTop;
}
if (elementState.Alignment == ElementState.AlignType.center)
{
elementsUnderConstruction.Peek().HAnchor |= HAnchor.ParentCenter;
}
break;
default:
throw new NotImplementedException("Don't know what to do with '{0}'".FormatWith(elementState.TypeName));
}
}
private void AddMatterHackersInfo(FlowLayoutWidget topToBottom)
{
FlowLayoutWidget headerContainer = new FlowLayoutWidget(FlowDirection.TopToBottom);
headerContainer.Margin = new BorderDouble(0, 0, 0, 10);
headerContainer.HAnchor = Agg.UI.HAnchor.ParentLeftRight;
{
TextWidget headerText = new TextWidget(string.Format(new LocalizedString("MatterControl").Translated), textColor: RGBA_Bytes.White, pointSize: 20);
headerText.MinimumSize = new VectorMath.Vector2(headerText.Width, headerText.Height);
headerText.HAnchor = Agg.UI.HAnchor.ParentCenter;
headerContainer.AddChild(headerText);
TextWidget versionText = new TextWidget(string.Format(new LocalizedString("Version {0}").Translated, VersionInfo.Instance.ReleaseVersion), textColor: RGBA_Bytes.White, pointSize: 10);
versionText.MinimumSize = new VectorMath.Vector2(versionText.Width, versionText.Height);
versionText.HAnchor = Agg.UI.HAnchor.ParentCenter;
headerContainer.AddChild(versionText);
TextWidget developedByText = new TextWidget(new LocalizedString("Developed by MatterHackers").Translated, textColor: RGBA_Bytes.White);
developedByText.Margin = new BorderDouble(top: 5);
developedByText.HAnchor = Agg.UI.HAnchor.ParentCenter;
developedByText.MinimumSize = new VectorMath.Vector2(developedByText.Width, developedByText.Height);
headerContainer.AddChild(developedByText);
}
topToBottom.AddChild(headerContainer);
GuiWidget topSpacer = new GuiWidget();
topSpacer.VAnchor = VAnchor.ParentBottomTop;
topToBottom.AddChild(topSpacer);
// Slicer and agg thanks
{
// donate to mc
{
FlowLayoutWidget donateTextContanier = new FlowLayoutWidget();
TextWidget donateStartText = new TextWidget(new LocalizedString("Please consider ").Translated, textColor: RGBA_Bytes.White);
donateTextContanier.AddChild(donateStartText);
Button matterControlDonateLink = linkButtonFactory.Generate(new LocalizedString("donating").Translated);
matterControlDonateLink.OriginRelativeParent = new VectorMath.Vector2(matterControlDonateLink.OriginRelativeParent.x, matterControlDonateLink.OriginRelativeParent.y + donateStartText.Printer.TypeFaceStyle.DescentInPixels);
matterControlDonateLink.Click += (sender, mouseEvent) => { System.Diagnostics.Process.Start("http://www.matterhackers.com/store/printer-accessories/mattercontrol-donation"); };
donateTextContanier.AddChild(matterControlDonateLink);
donateTextContanier.AddChild(new TextWidget(new LocalizedString(" to help support and improve MatterControl.").Translated, textColor: RGBA_Bytes.White));
donateTextContanier.HAnchor = Agg.UI.HAnchor.ParentCenter;
topToBottom.AddChild(donateTextContanier);
}
// spacer
topToBottom.AddChild(new GuiWidget(10, 15));
InsertAttributionText(topToBottom, linkButtonFactory);
}
GuiWidget bottomSpacer = new GuiWidget();
bottomSpacer.VAnchor = VAnchor.ParentBottomTop;
topToBottom.AddChild(bottomSpacer);
FlowLayoutWidget feedbackButtons = new FlowLayoutWidget();
feedbackButtons.Margin = new BorderDouble(bottom: 10);
{
feedbackButtons.HAnchor |= Agg.UI.HAnchor.ParentCenter;
Button feedbackLink = textImageButtonFactory.Generate(new LocalizedString("Send Feedback").Translated);
feedbackLink.Click += (sender, mouseEvent) => { ContactFormWindow.Open(); };
feedbackButtons.AddChild(feedbackLink);
GuiWidget buttonSpacer = new GuiWidget(10, 10);
feedbackButtons.AddChild(buttonSpacer);
}
topToBottom.AddChild(feedbackButtons);
Button learnMoreLink = linkButtonFactory.Generate(new LocalizedString("www.matterhackers.com").Translated);
learnMoreLink.Margin = new BorderDouble(right: 12);
learnMoreLink.Click += (sender, mouseEvent) => { System.Diagnostics.Process.Start("http://www.matterhackers.com?clk=mc"); };
learnMoreLink.HAnchor = HAnchor.ParentCenter;
learnMoreLink.Margin = new BorderDouble(0, 5);
topToBottom.AddChild(learnMoreLink);
TextWidget copyrightText = new TextWidget(string.Format(new LocalizedString("Copyright © 2013 MatterHackers, Inc.").Translated), textColor: offWhite);
copyrightText.HAnchor = Agg.UI.HAnchor.ParentCenter;
topToBottom.AddChild(copyrightText);
{
FlowLayoutWidget leftToRightBuildInfo = new FlowLayoutWidget();
leftToRightBuildInfo.HAnchor |= HAnchor.ParentCenter;
TextWidget buildText = new TextWidget(string.Format(new LocalizedString("Build: {0} | ").Translated, VersionInfo.Instance.BuildVersion), textColor: offWhite, pointSize: 10);
leftToRightBuildInfo.AddChild(buildText);
double oldFontSize = linkButtonFactory.fontSize;
linkButtonFactory.fontSize = 10;
Button deleteCacheLink = linkButtonFactory.Generate(new LocalizedString("Clear Cache").Translated);
linkButtonFactory.fontSize = oldFontSize;
deleteCacheLink.OriginRelativeParent = new VectorMath.Vector2(deleteCacheLink.OriginRelativeParent.x, deleteCacheLink.OriginRelativeParent.y + buildText.Printer.TypeFaceStyle.DescentInPixels);
deleteCacheLink.Click += (sender, mouseEvent) => { DeleteCacheData(); };
leftToRightBuildInfo.AddChild(deleteCacheLink);
topToBottom.AddChild(leftToRightBuildInfo);
}
}
public bool IsValid()
{
try
{
if (LayerHeight > NozzleDiameter)
{
string error = new LocalizedString("'Layer Height' must be less than or equal to the 'Nozzle Diameter'.").Translated;
string details = string.Format("Layer Height = {0}\nNozzle Diameter = {1}", LayerHeight, NozzleDiameter);
string location = new LocalizedString("Location: 'Advanced Controls' -> 'Slice Settings' -> 'Print' -> 'Layers/Perimeters'").Translated;
StyledMessageBox.ShowMessageBox(string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error");
return(false);
}
else if (FirstLayerHeight > NozzleDiameter)
{
string error = new LocalizedString("First Layer Height' must be less than or equal to the 'Nozzle Diameter'.").Translated;
string details = string.Format("First Layer Height = {0}\nNozzle Diameter = {1}", FirstLayerHeight, NozzleDiameter);
string location = "Location: 'Advanced Controls' -> 'Slice Settings' -> 'Print' -> 'Layers/Perimeters'";
StyledMessageBox.ShowMessageBox(string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error");
return(false);
}
if (MinFanSpeed > 100)
{
string error = "The Min Fan Speed can only go as high as 100%.";
string details = string.Format("It is currently set to {0}.", MinFanSpeed);
string location = "Location: 'Advanced Controls' -> 'Slice Settings' -> 'Fillament' -> 'Cooling' (show all settings)";
StyledMessageBox.ShowMessageBox(string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error");
return(false);
}
if (MaxFanSpeed > 100)
{
string error = "The Max Fan Speed can only go as high as 100%.";
string details = string.Format("It is currently set to {0}.", MaxFanSpeed);
string location = "Location: 'Advanced Controls' -> 'Slice Settings' -> 'Fillament' -> 'Cooling' (show all settings)";
StyledMessageBox.ShowMessageBox(string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error");
return(false);
}
if (FillDensity < 0 || FillDensity > 1)
{
string error = "The Fill Density must be between 0 and 1 inclusive.";
string details = string.Format("It is currently set to {0}.", FillDensity);
string location = "Location: 'Advanced Controls' -> 'Slice Settings' -> 'Print' -> 'Infill'";
StyledMessageBox.ShowMessageBox(string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error");
return(false);
}
// If the given speed is part of the current slice engine then check that it is greater than 0.
if (!ValidateGoodSpeedSettingGreaterThan0("bridge_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("external_perimeter_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("first_layer_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("gap_fill_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("infill_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("perimeter_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("retract_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("small_perimeter_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("solid_infill_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("support_material_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("top_solid_infill_speed"))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("travel_speed"))
{
return(false);
}
}
catch (Exception e)
{
string stackTraceNoBackslashRs = e.StackTrace.Replace("\r", "");
ContactFormWindow.Open("Parse Error while slicing", e.Message + stackTraceNoBackslashRs);
return(false);
}
return(true);
}
private void AddContent(HtmlParser htmlParser, string htmlContent)
{
ElementState elementState = htmlParser.CurrentElementState;
string decodedHtml = HtmlParser.UrlDecode(htmlContent);
switch (elementState.TypeName)
{
case "a":
{
Button linkButton = linkButtonFactory.Generate(decodedHtml);
StyledTypeFace styled = new StyledTypeFace(LiberationSansFont.Instance, elementState.PointSize);
double descentInPixels = styled.DescentInPixels;
linkButton.OriginRelativeParent = new VectorMath.Vector2(linkButton.OriginRelativeParent.x, linkButton.OriginRelativeParent.y + descentInPixels);
linkButton.Click += (sender, mouseEvent) =>
{
MatterControlApplication.Instance.LaunchBrowser(elementState.Href);
};
currentRow.AddChild(linkButton);
}
break;
case "table":
break;
case "td":
case "span":
GuiWidget widgetToAdd;
if (elementState.Classes.Contains("translate"))
{
decodedHtml = decodedHtml.Localize();
}
if (elementState.Classes.Contains("toUpper"))
{
decodedHtml = decodedHtml.ToUpper();
}
if (elementState.Classes.Contains("versionNumber"))
{
decodedHtml = VersionInfo.Instance.ReleaseVersion;
}
if (elementState.Classes.Contains("buildNumber"))
{
decodedHtml = VersionInfo.Instance.BuildVersion;
}
Button createdButton = null;
if (elementState.Classes.Contains("centeredButton"))
{
createdButton = textImageButtonFactory.Generate(decodedHtml);
widgetToAdd = createdButton;
}
else if (elementState.Classes.Contains("linkButton"))
{
double oldFontSize = linkButtonFactory.fontSize;
linkButtonFactory.fontSize = elementState.PointSize;
createdButton = linkButtonFactory.Generate(decodedHtml);
StyledTypeFace styled = new StyledTypeFace(LiberationSansFont.Instance, elementState.PointSize);
double descentInPixels = styled.DescentInPixels;
createdButton.OriginRelativeParent = new VectorMath.Vector2(createdButton.OriginRelativeParent.x, createdButton.OriginRelativeParent.y + descentInPixels);
widgetToAdd = createdButton;
linkButtonFactory.fontSize = oldFontSize;
}
else
{
TextWidget content = new TextWidget(decodedHtml, pointSize: elementState.PointSize, textColor: ActiveTheme.Instance.PrimaryTextColor);
widgetToAdd = content;
}
if (createdButton != null)
{
if (elementState.Id == "sendFeedback")
{
createdButton.Click += (sender, mouseEvent) => { ContactFormWindow.Open(); };
}
else if (elementState.Id == "clearCache")
{
createdButton.Click += (sender, mouseEvent) => { DeleteCacheData(); };
}
}
if (elementState.VerticalAlignment == ElementState.VerticalAlignType.top)
{
widgetToAdd.VAnchor = VAnchor.ParentTop;
}
currentRow.AddChild(widgetToAdd);
break;
case "tr":
currentRow = new FlowLayoutWidget();
if (elementState.HeightPercent == 100)
{
currentRow.VAnchor = VAnchor.ParentBottomTop;
}
if (elementState.Alignment == ElementState.AlignType.center)
{
currentRow.HAnchor |= HAnchor.ParentCenter;
}
break;
default:
throw new NotImplementedException("Don't know what to do with {0}".FormatWith(elementState.TypeName));
}
}
public bool IsValid()
{
try
{
if (LayerHeight() > NozzleDiameter())
{
string error = "'Layer Height' must be less than or equal to the 'Nozzle Diameter'.".Localize();
string details = string.Format("Layer Height = {0}\nNozzle Diameter = {1}".Localize(), LayerHeight(), NozzleDiameter());
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Layers/Surface'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
else if (FirstLayerHeight() > NozzleDiameter())
{
string error = "'First Layer Height' must be less than or equal to the 'Nozzle Diameter'.".Localize();
string details = string.Format("First Layer Height = {0}\nNozzle Diameter = {1}".Localize(), FirstLayerHeight(), NozzleDiameter());
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Layers/Surface'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
// If we have print leveling turned on then make sure we don't have any leveling commands in the start gcode.
if (PrinterConnectionAndCommunication.Instance.ActivePrinter.DoPrintLeveling())
{
string[] startGCode = ActiveValue("start_gcode").Replace("\\n", "\n").Split('\n');
foreach (string startGCodeLine in startGCode)
{
if (startGCodeLine.StartsWith("G29"))
{
string error = "Start G-Code cannot contain G29 if Print Leveling is enabled.".Localize();
string details = "Your Start G-Code should not contain a G29 if you are planning on using print leveling. Change your start G-Code or turn off print leveling".Localize();
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Printer' -> 'Custom G-Code' -> 'Start G-Code'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (startGCodeLine.StartsWith("G30"))
{
string error = "Start G-Code cannot contain G30 if Print Leveling is enabled.".Localize();
string details = "Your Start G-Code should not contain a G30 if you are planning on using print leveling. Change your start G-Code or turn off print leveling".Localize();
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Printer' -> 'Custom G-Code' -> 'Start G-Code'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
}
}
if (FirstLayerExtrusionWidth() > NozzleDiameter() * 4)
{
string error = "'First Layer Extrusion Width' must be less than or equal to the 'Nozzle Diameter' * 4.".Localize();
string details = string.Format("First Layer Extrusion Width = {0}\nNozzle Diameter = {1}".Localize(), ActiveValue("first_layer_extrusion_width"), NozzleDiameter());
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Extrusion' -> 'First Layer'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (FirstLayerExtrusionWidth() <= 0)
{
string error = "'First Layer Extrusion Width' must be greater than 0.".Localize();
string details = string.Format("First Layer Extrusion Width = {0}".Localize(), ActiveValue("first_layer_extrusion_width"));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Extrusion' -> 'First Layer'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (MinFanSpeed() > 100)
{
string error = "The Minimum Fan Speed can only go as high as 100%.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), MinFanSpeed());
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Cooling'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (MaxFanSpeed() > 100)
{
string error = "The Maximum Fan Speed can only go as high as 100%.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), MaxFanSpeed());
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Cooling'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (ExtruderCount() < 1)
{
string error = "The Extruder Count must be at least 1.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), ExtruderCount());
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Printer' -> 'Features'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (FillDensity() < 0 || FillDensity() > 1)
{
string error = "The Fill Density must be between 0 and 1.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), FillDensity());
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Infill'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (FillDensity() == 1 &&
ActiveValue("infill_type") != "LINES")
{
string error = "Solid Infill works best when set to LINES.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), ActiveValue("infill_type"));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Infill Type'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(true);
}
string normalSpeedLocation = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Speed'".Localize();
// If the given speed is part of the current slice engine then check that it is greater than 0.
if (!ValidateGoodSpeedSettingGreaterThan0("bridge_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("external_perimeter_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("first_layer_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("gap_fill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("infill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("perimeter_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("small_perimeter_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("solid_infill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("support_material_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("top_solid_infill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("travel_speed", normalSpeedLocation))
{
return(false);
}
string retractSpeedLocation = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Filament' -> 'Retraction'".Localize();
if (!ValidateGoodSpeedSettingGreaterThan0("retract_speed", retractSpeedLocation))
{
return(false);
}
}
catch (Exception e)
{
Debug.Print(e.Message);
GuiWidget.BreakInDebugger();
string stackTraceNoBackslashRs = e.StackTrace.Replace("\r", "");
ContactFormWindow.Open("Parse Error while slicing".Localize(), e.Message + stackTraceNoBackslashRs);
return(false);
}
return(true);
}
public bool IsValid()
{
try
{
if (GetValue <double>(SettingsKey.layer_height) > GetValue <double>(SettingsKey.nozzle_diameter))
{
string error = "'Layer Height' must be less than or equal to the 'Nozzle Diameter'.".Localize();
string details = string.Format("Layer Height = {0}\nNozzle Diameter = {1}".Localize(), GetValue <double>(SettingsKey.layer_height), GetValue <double>(SettingsKey.nozzle_diameter));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Layers/Surface'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
else if (GetValue <double>(SettingsKey.first_layer_height) > GetValue <double>(SettingsKey.nozzle_diameter))
{
string error = "'First Layer Height' must be less than or equal to the 'Nozzle Diameter'.".Localize();
string details = string.Format("First Layer Height = {0}\nNozzle Diameter = {1}".Localize(), GetValue <double>(SettingsKey.first_layer_height), GetValue <double>(SettingsKey.nozzle_diameter));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Layers/Surface'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
// Print recovery can only work with a manually leveled or software leveled bed. Hardware leveling does not work.
if (GetValue <bool>(SettingsKey.recover_is_enabled))
{
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Printer' -> 'Print Recovery' -> 'Enable Recovery'".Localize();
string[] startGCode = GetValue("start_gcode").Replace("\\n", "\n").Split('\n');
foreach (string startGCodeLine in startGCode)
{
if (startGCodeLine.StartsWith("G29"))
{
string error = "Start G-Code cannot contain G29 if Print Recovery is enabled.".Localize();
string details = "Your Start G-Code should not contain a G29 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (startGCodeLine.StartsWith("G30"))
{
string error = "Start G-Code cannot contain G30 if Print Leveling is enabled.".Localize();
string details = "Your Start G-Code should not contain a G30 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
}
}
// If we have print leveling turned on then make sure we don't have any leveling commands in the start gcode.
if (GetValue <bool>(SettingsKey.print_leveling_enabled))
{
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Printer' -> 'Custom G-Code' -> 'Start G-Code'".Localize();
string[] startGCode = GetValue("start_gcode").Replace("\\n", "\n").Split('\n');
foreach (string startGCodeLine in startGCode)
{
if (startGCodeLine.StartsWith("G29"))
{
string error = "Start G-Code cannot contain G29 if Print Leveling is enabled.".Localize();
string details = "Your Start G-Code should not contain a G29 if you are planning on using print leveling. Change your start G-Code or turn off print leveling".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (startGCodeLine.StartsWith("G30"))
{
string error = "Start G-Code cannot contain G30 if Print Leveling is enabled.".Localize();
string details = "Your Start G-Code should not contain a G30 if you are planning on using print leveling. Change your start G-Code or turn off print leveling".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
}
}
if (GetValue <double>(SettingsKey.first_layer_extrusion_width) > GetValue <double>(SettingsKey.nozzle_diameter) * 4)
{
string error = "'First Layer Extrusion Width' must be less than or equal to the 'Nozzle Diameter' * 4.".Localize();
string details = string.Format("First Layer Extrusion Width = {0}\nNozzle Diameter = {1}".Localize(), GetValue(SettingsKey.first_layer_extrusion_width), GetValue <double>(SettingsKey.nozzle_diameter));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Extrusion' -> 'First Layer'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (GetValue <double>(SettingsKey.first_layer_extrusion_width) <= 0)
{
string error = "'First Layer Extrusion Width' must be greater than 0.".Localize();
string details = string.Format("First Layer Extrusion Width = {0}".Localize(), GetValue(SettingsKey.first_layer_extrusion_width));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Extrusion' -> 'First Layer'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (GetValue <double>(SettingsKey.external_perimeter_extrusion_width) > GetValue <double>(SettingsKey.nozzle_diameter) * 4)
{
string error = "'External Perimeter Extrusion Width' must be less than or equal to the 'Nozzle Diameter' * 4.".Localize();
string details = string.Format("External Perimeter Extrusion Width = {0}\nNozzle Diameter = {1}".Localize(), GetValue(SettingsKey.external_perimeter_extrusion_width), GetValue <double>(SettingsKey.nozzle_diameter));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Extrusion' -> 'External Perimeter'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (GetValue <double>(SettingsKey.external_perimeter_extrusion_width) <= 0)
{
string error = "'External Perimeter Extrusion Width' must be greater than 0.".Localize();
string details = string.Format("External Perimeter Extrusion Width = {0}".Localize(), GetValue(SettingsKey.external_perimeter_extrusion_width));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Extrusion' -> 'External Perimeter'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (GetValue <double>(SettingsKey.min_fan_speed) > 100)
{
string error = "The Minimum Fan Speed can only go as high as 100%.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), GetValue <double>(SettingsKey.min_fan_speed));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Cooling'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (GetValue <double>("max_fan_speed") > 100)
{
string error = "The Maximum Fan Speed can only go as high as 100%.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), GetValue <double>("max_fan_speed"));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Cooling'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (GetValue <int>(SettingsKey.extruder_count) < 1)
{
string error = "The Extruder Count must be at least 1.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), GetValue <int>(SettingsKey.extruder_count));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Printer' -> 'Features'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (GetValue <double>(SettingsKey.fill_density) < 0 || GetValue <double>(SettingsKey.fill_density) > 1)
{
string error = "The Fill Density must be between 0 and 1.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), GetValue <double>(SettingsKey.fill_density));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Infill'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (GetValue <double>(SettingsKey.fill_density) == 1 &&
GetValue("infill_type") != "LINES")
{
string error = "Solid Infill works best when set to LINES.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), GetValue("infill_type"));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Infill Type'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(true);
}
string normalSpeedLocation = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Speed'".Localize();
// If the given speed is part of the current slice engine then check that it is greater than 0.
if (!ValidateGoodSpeedSettingGreaterThan0("bridge_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("external_perimeter_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0(SettingsKey.first_layer_speed, normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("gap_fill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("infill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("perimeter_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("small_perimeter_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("solid_infill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("support_material_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("top_solid_infill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("travel_speed", normalSpeedLocation))
{
return(false);
}
string retractSpeedLocation = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Filament' -> 'Retraction'".Localize();
if (!ValidateGoodSpeedSettingGreaterThan0("retract_speed", retractSpeedLocation))
{
return(false);
}
}
catch (Exception e)
{
Debug.Print(e.Message);
GuiWidget.BreakInDebugger();
string stackTraceNoBackslashRs = e.StackTrace.Replace("\r", "");
ContactFormWindow.Open("Parse Error while slicing".Localize(), e.Message + stackTraceNoBackslashRs);
return(false);
}
return(true);
}
public bool IsValid()
{
try
{
if (LayerHeight > NozzleDiameter)
{
string error = "'Layer Height' must be less than or equal to the 'Nozzle Diameter'.".Localize();
string details = string.Format("Layer Height = {0}\nNozzle Diameter = {1}".Localize(), LayerHeight, NozzleDiameter);
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Layers/Surface'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
else if (FirstLayerHeight > NozzleDiameter)
{
string error = "First Layer Height' must be less than or equal to the 'Nozzle Diameter'.".Localize();
string details = string.Format("First Layer Height = {0}\nNozzle Diameter = {1}".Localize(), FirstLayerHeight, NozzleDiameter);
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Layers/Surface'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (FirstLayerExtrusionWidth > NozzleDiameter * 4)
{
string error = "First Layer Extrusion Width' must be less than or equal to the 'Nozzle Diameter' * 4.".Localize();
string details = string.Format("First Layer Extrusion Width = {0}\nNozzle Diameter = {1}".Localize(), GetActiveValue("first_layer_extrusion_width"), NozzleDiameter);
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Extrusion' -> 'First Layer'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (FirstLayerExtrusionWidth <= 0)
{
string error = "First Layer Extrusion Width' must be greater than 0.".Localize();
string details = string.Format("First Layer Extrusion Width = {0}".Localize(), GetActiveValue("first_layer_extrusion_width"));
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Extrusion' -> 'First Layer'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (MinFanSpeed > 100)
{
string error = "The Min Fan Speed can only go as high as 100%.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), MinFanSpeed);
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Cooling' (Advanced display)".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (MaxFanSpeed > 100)
{
string error = "The Max Fan Speed can only go as high as 100%.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), MaxFanSpeed);
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Cooling' (Advanced display)".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (ExtruderCount < 1)
{
string error = "The Extruder Count must be at least 1.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), ExtruderCount);
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'Printer' -> 'Features' (Advanced display)".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
if (FillDensity < 0 || FillDensity > 1)
{
string error = "The Fill Density must be between 0 and 1 inclusive.".Localize();
string details = string.Format("It is currently set to {0}.".Localize(), FillDensity);
string location = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Infill'".Localize();
StyledMessageBox.ShowMessageBox(null, string.Format("{0}\n\n{1}\n\n{2}", error, details, location), "Slice Error".Localize());
return(false);
}
string normalSpeedLocation = "Location: 'Settings & Controls' -> 'Settings' -> 'General' -> 'Speed'".Localize();
// If the given speed is part of the current slice engine then check that it is greater than 0.
if (!ValidateGoodSpeedSettingGreaterThan0("bridge_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("external_perimeter_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("first_layer_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("gap_fill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("infill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("perimeter_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("small_perimeter_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("solid_infill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("support_material_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("top_solid_infill_speed", normalSpeedLocation))
{
return(false);
}
if (!ValidateGoodSpeedSettingGreaterThan0("travel_speed", normalSpeedLocation))
{
return(false);
}
string retractSpeedLocation = "Location: 'Settings & Controls' -> 'Settings' -> 'Filament' -> 'Filament' -> 'Retraction'".Localize();
if (!ValidateGoodSpeedSettingGreaterThan0("retract_speed", retractSpeedLocation))
{
return(false);
}
}
catch (Exception e)
{
Debug.Print(e.Message);
GuiWidget.BreakInDebugger();
string stackTraceNoBackslashRs = e.StackTrace.Replace("\r", "");
ContactFormWindow.Open("Parse Error while slicing".Localize(), e.Message + stackTraceNoBackslashRs);
return(false);
}
return(true);
}