private void AddConnectedMember(AttachedMember attachedMember, ConnectionPoint connectionPoint)
{
PolyLine3D polyLine3D = new PolyLine3D();
polyLine3D.Id = openModel.GetMaxId(polyLine3D) + 1;
openModel.AddObject(polyLine3D);
//endpoints
Point3D pA = openModel.Point3D.First(a => a.Id == attachedMember.ideaLine.Start.id);
Point3D pB = openModel.Point3D.First(a => a.Id == attachedMember.ideaLine.End.id);
//create line segment
LineSegment3D lineSegment = new LineSegment3D();
lineSegment.Id = openModel.GetMaxId(lineSegment) + 1;
lineSegment.StartPoint = new ReferenceElement(pA);
lineSegment.EndPoint = new ReferenceElement(pB);
openModel.AddObject(lineSegment);
polyLine3D.Segments.Add(new ReferenceElement(lineSegment));
///*
double xcor = attachedMember.ElementRAZ.line.vector.X;
double ycor = attachedMember.ElementRAZ.line.vector.Y;
double zcor = attachedMember.ElementRAZ.line.vector.Z;
//Define LCS (local-y in XY plane) and unitize
VectorRAZ vx = new VectorRAZ(xcor, ycor, zcor).Unitize();
VectorRAZ vy = new VectorRAZ();
VectorRAZ vz = new VectorRAZ();
if (xcor == 0.0 && ycor == 0.0)
{
vy = new VectorRAZ(0.0, 1.0, 0.0).Unitize();
vz = new VectorRAZ((-zcor), 0.0, (xcor)).Unitize();
}
else
{
vy = new VectorRAZ(-ycor, xcor, 0.0).Unitize();
vz = new VectorRAZ((-zcor * xcor), (-zcor * ycor), ((xcor * xcor) + (ycor * ycor))).Unitize();
}
var LocalCoordinateSystem = new CoordSystemByVector();
LocalCoordinateSystem.VecX = new Vector3D()
{
X = vx.X, Y = vx.Y, Z = vx.Z
};
LocalCoordinateSystem.VecY = new Vector3D()
{
X = vy.X, Y = vy.Y, Z = vy.Z
};
LocalCoordinateSystem.VecZ = new Vector3D()
{
X = vz.X, Y = vz.Y, Z = vz.Z
};
lineSegment.LocalCoordinateSystem = LocalCoordinateSystem;
//*/
//create element
Element1D element1D = new Element1D();
//element1D.Id = openModel.GetMaxId(element1D) + 1;
element1D.Id = attachedMember.ElementRAZ.id + 1; //Use of Id from Grasshopper Model + Plus One
element1D.Name = "Element " + element1D.Id.ToString();
element1D.Segment = new ReferenceElement(lineSegment);
IdeaRS.OpenModel.CrossSection.CrossSection crossSection = openModel.CrossSection.First(a => a.Id == attachedMember.ElementRAZ.crossSection.id);
element1D.CrossSectionBegin = new ReferenceElement(crossSection);
element1D.CrossSectionEnd = new ReferenceElement(crossSection);
if (attachedMember is ConnectingMember)
{
ConnectingMember connectingMember = attachedMember as ConnectingMember;
double eccentricty = new double();
if (connectingMember.localEccentricity == -0)
{
eccentricty = 0;
}
else
{
eccentricty = connectingMember.localEccentricity;
}
element1D.EccentricityBeginZ = eccentricty;
element1D.EccentricityEndZ = eccentricty;
}
openModel.AddObject(element1D);
//create member
Member1D member1D = new Member1D();
member1D.Id = openModel.GetMaxId(member1D) + 1;
member1D.Name = "Member " + member1D.Id.ToString();
member1D.Elements1D.Add(new ReferenceElement(element1D));
openModel.Member1D.Add(member1D);
//create connected member
ConnectedMember connectedMember = new ConnectedMember();
connectedMember.Id = member1D.Id;
connectedMember.MemberId = new ReferenceElement(member1D);
connectionPoint.ConnectedMembers.Add(connectedMember);
}
private void AddConnectedMember(AttachedMember attachedMember, ConnectionPoint connectionPoint)
{
PolyLine3D polyLine3D = new PolyLine3D();
polyLine3D.Id = openModel.GetMaxId(polyLine3D) + 1;
openModel.AddObject(polyLine3D);
//endpoints
Point3D pA = openModel.Point3D.First(a => a.Id == attachedMember.ideaLine.Start.id);
Point3D pB = openModel.Point3D.First(a => a.Id == attachedMember.ideaLine.End.id);
//create line segment
LineSegment3D lineSegment = new LineSegment3D();
lineSegment.Id = openModel.GetMaxId(lineSegment) + 1;
lineSegment.StartPoint = new ReferenceElement(pA);
lineSegment.EndPoint = new ReferenceElement(pB);
openModel.AddObject(lineSegment);
polyLine3D.Segments.Add(new ReferenceElement(lineSegment));
SetLCS(attachedMember, lineSegment);
//create element
Element1D element1D = new Element1D();
//element1D.Id = openModel.GetMaxId(element1D) + 1;
element1D.Id = attachedMember.ElementRAZ.id + 1; //Use of Id from Grasshopper Model + Plus One
element1D.Name = "Element " + element1D.Id.ToString();
element1D.Segment = new ReferenceElement(lineSegment);
IdeaRS.OpenModel.CrossSection.CrossSection crossSection = openModel.CrossSection.First(a => a.Id == attachedMember.ElementRAZ.crossSection.id);
element1D.CrossSectionBegin = new ReferenceElement(crossSection);
element1D.CrossSectionEnd = new ReferenceElement(crossSection);
//element1D.RotationRx = attachedMember.ElementRAZ.rotationLCS;
if (attachedMember is ConnectingMember)
{
ConnectingMember connectingMember = attachedMember as ConnectingMember;
double eccentricty = new double();
if (connectingMember.localEccentricity == -0)
{
eccentricty = 0;
}
else
{
eccentricty = connectingMember.localEccentricity;
}
element1D.EccentricityBeginZ = eccentricty;
element1D.EccentricityEndZ = eccentricty;
}
openModel.AddObject(element1D);
//create member
Member1D member1D = new Member1D();
member1D.Id = openModel.GetMaxId(member1D) + 1;
member1D.Name = "Member " + member1D.Id.ToString();
member1D.Elements1D.Add(new ReferenceElement(element1D));
openModel.Member1D.Add(member1D);
//create connected member
ConnectedMember connectedMember = new ConnectedMember();
connectedMember.Id = member1D.Id;
connectedMember.MemberId = new ReferenceElement(member1D);
connectionPoint.ConnectedMembers.Add(connectedMember);
}
