int ComponentDisplayStateChangeNotify(object swObject)
{
Component2 component = (Component2)swObject;
ModelDoc2 modDoc = (ModelDoc2)component.GetModelDoc();
return(ComponentStateChange(modDoc));
}
public void setColour(Color c)
{
SldWorks swApp = ConnectToSolidWorks();
Component2 swComp = default(Component2);
ModelDoc2 swModel = (ModelDoc2)swApp.ActiveDoc;
SelectionMgr swSelMgr = (SelectionMgr)swModel.SelectionManager;
swComp = swSelMgr.GetSelectedObjectsComponent3(1, 0);
var vMatProp = (double[])swComp.MaterialPropertyValues;// GetModelMaterialPropertyValues("");
if (vMatProp == null)
{
ModelDoc2 swCompModel = (ModelDoc2)swComp.GetModelDoc();
vMatProp = (double[])swCompModel.MaterialPropertyValues;
}
vMatProp[0] = c.R / 255;
vMatProp[1] = c.G / 255;
vMatProp[2] = c.B / 255;
swComp.MaterialPropertyValues = vMatProp;
}
int ComponentVisualPropertiesChangeNotify(object swObject)
{
Component2 component = (Component2)swObject;
ModelDoc2 modDoc = (ModelDoc2)component.GetModelDoc();
return(ComponentStateChange(modDoc));
}
// Set Materials
public void ApplyMaterial(string partPath, string confName, int materialID, SldWorks swapp)
{
_swmodel = swapp.ActiveDoc;
swapp.SetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swFileLocationsMaterialDatabases, GlobalPaths.PathToSwComplexFolder); // задаем базы данных материалов
_swPartDoc = ((PartDoc)(_swmodel));
const string dbMatName = "vents-materials.sldmat";
ToSQL addMatXml = new ToSQL();
if (_swmodel.GetType() == (int)swDocumentTypes_e.swDocASSEMBLY)
{
Component2 comp = _swmodel.ISelectionManager.GetSelectedObject3(1);
PartDoc swPartAssem = comp.GetModelDoc();
//// удаляем материал
//swPartAssem.SetMaterialPropertyName("", "");
// применяем материал
swPartAssem.SetMaterialPropertyName2(confName, dbMatName, addMatXml.AddMaterialtoXml(materialID));
_swmodel.ClearSelection2(true);
}
else if (_swmodel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
// Если имя не пустое
if (partPath != "")
{
//// удаляем материал
//swPartDoc.SetMaterialPropertyName("", "");
// применяем материал
_swPartDoc.SetMaterialPropertyName2(confName, dbMatName, addMatXml.AddMaterialtoXml(materialID));
//_swmodel.ForceRebuild3(false);
//_swmodel.Save3((int)swSaveAsOptions_e.swSaveAsOptions_Silent, 0, 0);
//swapp.CloseDoc(partPath);
//swapp.ExitApp();
//swapp = null;
}
else
{
//// удаляем материал
//swPartDoc.SetMaterialPropertyName(confName, "");
// применяем материал
_swPartDoc.SetMaterialPropertyName2(confName, dbMatName, addMatXml.AddMaterialtoXml(materialID));
}
}
//catch (Exception ex)
//{
// //swapp.SendMsgToUser(ex.ToString());
// MessageBox.Show(ex.Message);
// Error = ex.ToString();
//}
}
int ComponentDisplayStateChangeNotify(object swObject)
{
Component2 component = (Component2)swObject;
ModelDoc2 modDoc = (ModelDoc2)component.GetModelDoc();
//StringBuilder sb = new StringBuilder();
//sb.Append(modDoc.SceneName + "----" + modDoc.SceneUserName);
return(ComponentStateChange(modDoc));
}
public static void Set_transparency(ModelDoc2 swModel, string name)
{
AssemblyDoc swAssembly = null;
Component2 swComp = null;
ModelDoc2 swCompDoc = null;
bool boolstatus = false;
try
{
if (swModel.GetType() == (int)swDocumentTypes_e.swDocASSEMBLY)
{
swModel.ClearSelection2(true);
// boolstatus = swModel.Extension.SelectByID2(name + "@" + docname, "COMPONENT", 0, 0, 0, true, 0, null, 0);
// SelectionMgr SwSelMgr = swModel.SelectionManager;
swAssembly = (AssemblyDoc)swModel;
var Components = swAssembly.GetComponents(false);
for (int i = 0; i < Components.Length; i++)
{
//swComp = swAssembly.GetComponentByName(name);
swComp = Components[i];
if (swComp != null)
{
if (swComp.Name2.Contains(name))
{
// MessageBox.Show(name);
var vMatProps = swComp.MaterialPropertyValues;
if (vMatProps == null)
{
swCompDoc = swComp.GetModelDoc();
if (swCompDoc == null)
{
return;
}
vMatProps = swCompDoc.MaterialPropertyValues;
}
vMatProps[7] = 1; //Transparency
swComp.MaterialPropertyValues = vMatProps;
swModel.ClearSelection2(true);
}
}
}
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message + ex.StackTrace);
}
}
public string CreateNewJoinPart(AssemblyDoc assemblyDoc, Component2 insertComponentSendtoCustomer, Component2 insertComponentLocal, ModelDoc2 swModel, string partname, out Component2 returnpart)
{
Component2 sendToCustomerBodies = default(Component2);
object swFaceOrPlane = default(object);
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out sendToCustomerBodies);
sendToCustomerBodies.Select(true);
assemblyDoc.FixComponent();
sendToCustomerBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
object[] splits = sendToCustomerBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + partname;
ModelDoc2 compModel = default(ModelDoc2);
compModel = (ModelDoc2)sendToCustomerBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
bool ret;
ret = sendToCustomerBodies.SaveVirtualComponent(compName);
returnpart = sendToCustomerBodies;
return(sendToCustomerBodies.GetSelectByIDString());
}
public void UpdateFromSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)//, ref AttributeDef defattr_chconveyor)
{
// Fetch current properties from the selected part(s) (i.e. ChBody in C::E)
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
{
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc();
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
if (myattr == null)
{
// if not already added to part, create and attach it
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPart, "Chrono::ChBody_data", 0, (int)swInConfigurationOpts_e.swAllConfiguration);
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityInvalid))
{
System.Windows.Forms.MessageBox.Show("swIsEntityInvalid!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntitySuppressed))
{
System.Windows.Forms.MessageBox.Show("swIsEntitySuppressed!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityAmbiguous))
{
System.Windows.Forms.MessageBox.Show("swIsEntityAmbiguous!");
}
if (myattr.GetEntityState((int)swAssociatedEntityStates_e.swIsEntityDeleted))
{
System.Windows.Forms.MessageBox.Show("swIsEntityDeleted!");
}
swPartModel.ForceRebuild3(false); // needed?
}
Set_collision_on(Convert.ToBoolean(((Parameter)myattr.GetParameter(
"collision_on")).GetDoubleValue()));
Set_friction(((Parameter)myattr.GetParameter(
"friction")).GetDoubleValue());
Set_rolling_friction(((Parameter)myattr.GetParameter(
"rolling_friction")).GetDoubleValue());
Set_spinning_friction(((Parameter)myattr.GetParameter(
"spinning_friction")).GetDoubleValue());
Set_restitution(((Parameter)myattr.GetParameter(
"restitution")).GetDoubleValue());
Set_collision_envelope(((Parameter)myattr.GetParameter(
"collision_envelope")).GetDoubleValue());
Set_collision_margin(((Parameter)myattr.GetParameter(
"collision_margin")).GetDoubleValue());
Set_collision_family((int)((Parameter)myattr.GetParameter(
"collision_family")).GetDoubleValue());
// fetch SW attribute with Chrono parameters for ChConveyor
/*
* SolidWorks.Interop.sldworks.Attribute myattr_conv = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conv == null)
* {
* // if not already added to part, create and attach it
* //myattr_conv = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono::ChConveyor_data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
* }
*/
/*
* // fetch SW attribute with Chrono parameters for ChConveyor (if any!)
* SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conveyor != null)
* {
* show_conveyor_params = true;
*
* Set_conveyor_speed(((Parameter)myattr_conveyor.GetParameter(
* "conveyor_speed")).GetDoubleValue());
* }
*/
}
}
}
/// Convert a SolidWorks component to Wavefront OBJ mesh
///
public static void Convert(Component2 swComp, ref string asciitext, bool saveUV, ref UserProgressBar swProgress)
{
StringBuilder textbuilder = new StringBuilder();
Body2 swBody = default(Body2);
object[] vBodies = null;
object[] vBodiesSolid = null;
object[] vBodiesSheet = null;
object vBodyInfo;
int[] BodiesInfo = null;
int j = 0;
ModelDoc2 swModel;
swModel = (ModelDoc2)swComp.GetModelDoc();
vBodiesSolid = (object[])swComp.GetBodies3((int)swBodyType_e.swSolidBody, out vBodyInfo);
vBodiesSheet = (object[])swComp.GetBodies3((int)swBodyType_e.swSheetBody, out vBodyInfo);
BodiesInfo = (int[])vBodyInfo;
if (vBodiesSolid != null && vBodiesSheet == null)
vBodies = vBodiesSolid;
if (vBodiesSolid == null && vBodiesSheet != null)
vBodies = vBodiesSheet;
if (vBodiesSolid != null && vBodiesSheet != null)
vBodies = vBodiesSheet.Concat(vBodiesSolid).ToArray();
// vBodies = (object[])swComp.GetBodies3((int)swBodyType_e.swSolidBody, out vBodyInfo);
if (vBodies != null)
{
int iNumBodies = vBodies.Length;
int iNumSolidBodies = 0;
int iNumSheetBodies = 0;
int iNumTesselatedBodies = 0;
if (iNumBodies >0)
asciitext += "# Wavefront .OBJ file for tesselated shape: " + swComp.Name2 + " path: " + swModel.GetPathName() + "\n\n";
int group_vstride = 0;
int group_nstride = 0;
// Loop through bodies
for (j = 0; j <= vBodies.Length - 1; j++)
{
swBody = (Body2)vBodies[j];
int nBodyType = (int)swBody.GetType();
if (nBodyType == (int)swBodyType_e.swSheetBody)
iNumSheetBodies++;
if (nBodyType == (int)swBodyType_e.swSolidBody)
iNumSolidBodies++;
if ((nBodyType == (int)swBodyType_e.swSheetBody ||
nBodyType == (int)swBodyType_e.swSolidBody) &&
!swBody.Name.StartsWith("COLL.") &&
swBody.Visible)
{
iNumTesselatedBodies++;
CultureInfo bz = new CultureInfo("en-BZ");
//asciitext += "g body_" + iNumTesselatedBodies + "\n";
textbuilder.Append("g body_" + iNumTesselatedBodies + "\n");
Face2 swFace = null;
Tessellation swTessellation = null;
bool bResult = false;
// Pass in null so the whole body will be tessellated
swTessellation = (Tessellation)swBody.GetTessellation(null);
// Set up the Tessellation object
swTessellation.NeedFaceFacetMap = true;
swTessellation.NeedVertexParams = true;
swTessellation.NeedVertexNormal = true;
swTessellation.ImprovedQuality = true;
// How to handle matches across common edges
swTessellation.MatchType = (int)swTesselationMatchType_e.swTesselationMatchFacetTopology;
// Do it
if (swProgress != null)
swProgress.UpdateTitle("Exporting (tesselate process) ...");
bResult = swTessellation.Tessellate();
// Get the number of vertices and facets
//System.Windows.Forms.MessageBox.Show("Body n." + j + " vert.num=" + swTessellation.GetVertexCount());
//Debug.Print("Number of vertices: " + swTessellation.GetVertexCount());
//Debug.Print("Number of facets: " + swTessellation.GetFacetCount());
// Now get the facet data per face
int[] aFacetIds;
int iNumFacetIds;
int[] aFinIds;
int[] aVertexIds;
double[] aNormal;
double[] aVertexCoords1;
double[] aVertexCoords2;
double[] aVertexParams;
int numv = swTessellation.GetVertexCount();
// Write all vertexes
string mline;
for (int iv = 0; iv < numv; iv++)
{
if ((swProgress != null)&&(iv%200==0))
swProgress.UpdateTitle("Exporting (write " + iv + "-th vertex in .obj) ...");
aVertexCoords1 = (double[])swTessellation.GetVertexPoint(iv);
mline = "v " + (aVertexCoords1[0]*ChScale.L).ToString("f6", bz)
+ " " + (aVertexCoords1[1]*ChScale.L).ToString("f6", bz)
+ " " + (aVertexCoords1[2]*ChScale.L).ToString("f6", bz)
+ "\n";
textbuilder.Append(mline);
}
// Write all normals
for (int iv = 0; iv < numv; iv++)
{
if ((swProgress != null) && (iv % 200 == 0))
swProgress.UpdateTitle("Exporting (write " + iv + "-th normal in .obj) ...");
aNormal = (double[])swTessellation.GetVertexNormal(iv);
mline = "vn " + aNormal[0].ToString("f3", bz)
+ " " + aNormal[1].ToString("f3", bz)
+ " " + aNormal[2].ToString("f3", bz)
+ "\n";
textbuilder.Append(mline);
}
if (nBodyType == (int)swBodyType_e.swSheetBody) // for sheets, save two-sided triangles
for (int iv = 0; iv < numv; iv++)
{
if ((swProgress != null) && (iv % 200 == 0))
swProgress.UpdateTitle("Exporting (write " + iv + "-th normal in .obj) ...");
aNormal = (double[])swTessellation.GetVertexNormal(iv);
mline = "vn " + (-aNormal[0]).ToString("f3", bz)
+ " " + (-aNormal[1]).ToString("f3", bz)
+ " " + (-aNormal[2]).ToString("f3", bz)
+ "\n";
textbuilder.Append(mline);
}
// Write all UV (also with '0' as third value, for compatibility with some OBJ reader)
if (saveUV)
for (int iv = 0; iv < numv; iv++)
{
if ((swProgress != null) && (iv % 200 == 0))
swProgress.UpdateTitle("Exporting (write " + iv + "-th UV in .obj) ...");
aVertexParams = (double[])swTessellation.GetVertexParams(iv);
mline = "vt " + aVertexParams[0].ToString("f4", bz)
+ " " + aVertexParams[1].ToString("f4", bz)
+ " " + "0"
+ "\n";
textbuilder.Append(mline);
}
// Loop over faces
swFace = (Face2)swBody.GetFirstFace();
while (swFace != null)
{
aFacetIds = (int[])swTessellation.GetFaceFacets(swFace);
iNumFacetIds = aFacetIds.Length;
for (int iFacetIdIdx = 0; iFacetIdIdx < iNumFacetIds; iFacetIdIdx++)
{
if ((swProgress != null) && (iFacetIdIdx % 100 == 0))
swProgress.UpdateTitle("Exporting (write " + iFacetIdIdx + "-th face in .obj) ...");
mline = "f";
aFinIds = (int[])swTessellation.GetFacetFins(aFacetIds[iFacetIdIdx]);
// There should always be three fins per facet
for (int iFinIdx = 0; iFinIdx < 3; iFinIdx++)
{
aVertexIds = (int[])swTessellation.GetFinVertices(aFinIds[iFinIdx]);
// Three fins per face, two vertexes each fin,
// only the 1st vertex of two is needed (because of sharing)
if (saveUV)
mline += " " + (aVertexIds[0] + group_vstride +1) + "/"
+ (aVertexIds[0] + group_vstride +1) + "/"
+ (aVertexIds[0] + group_nstride +1);
else
mline += " " + (aVertexIds[0] + group_vstride + 1) + "//"
+ (aVertexIds[0] + group_nstride + 1);
}
mline += "\n";
textbuilder.Append(mline);
}
swFace = (Face2)swFace.GetNextFace();
}
swFace = (Face2)swBody.GetFirstFace();
if (nBodyType == (int)swBodyType_e.swSheetBody) // for sheets, save two-sided triangles
while (swFace != null)
{
aFacetIds = (int[])swTessellation.GetFaceFacets(swFace);
iNumFacetIds = aFacetIds.Length;
for (int iFacetIdIdx = 0; iFacetIdIdx < iNumFacetIds; iFacetIdIdx++)
{
if ((swProgress != null) && (iFacetIdIdx % 100 == 0))
swProgress.UpdateTitle("Exporting (write " + iFacetIdIdx + "-th face in .obj) ...");
mline = "f";
aFinIds = (int[])swTessellation.GetFacetFins(aFacetIds[iFacetIdIdx]);
for (int iFinIdx = 2; iFinIdx >= 0; iFinIdx--)
{
aVertexIds = (int[])swTessellation.GetFinVertices(aFinIds[iFinIdx]);
if (saveUV)
mline += " " + (aVertexIds[0] + group_vstride + 1) + "/"
+ (aVertexIds[0] + group_vstride + 1) + "/"
+ (aVertexIds[0] + swTessellation.GetVertexCount() + group_nstride + 1);
else
mline += " " + (aVertexIds[0] + group_vstride + 1) + "//"
+ (aVertexIds[0] + swTessellation.GetVertexCount() + group_nstride + 1);
}
mline += "\n";
textbuilder.Append(mline);
}
swFace = (Face2)swFace.GetNextFace();
}
group_vstride += swTessellation.GetVertexCount();
group_nstride += swTessellation.GetVertexCount();
if (nBodyType == (int)swBodyType_e.swSheetBody) // for sheets: two-sided triangles
group_nstride += swTessellation.GetVertexCount();
}
} // end loop on bodies
} // not null body
asciitext += textbuilder.ToString();
}
// Set Materials
public void ApplyMaterial(string partPath, string confName, int levelId, SldWorks swapp)
{
try
{
if (swapp == null)
{
if (partPath == "")
{
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
_swmodel = swapp.ActiveDoc;
}
else
{
swapp = new SldWorks {
Visible = true
};
swapp.OpenDoc6(partPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_LoadModel, confName, 0, 0);
_swmodel = swapp.ActivateDoc(partPath);
_swmodel = swapp.ActiveDoc;
}
}
else
{
if (partPath == "")
{
_swmodel = swapp.ActiveDoc;
}
else
{
//swapp = new SldWorks { Visible = true };
swapp.OpenDoc6(partPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_LoadModel, confName, 0, 0);
_swmodel = swapp.ActivateDoc(partPath);
_swmodel = swapp.ActiveDoc;
}
}
// Путь к APPDATA
var userAppData = System.Environment.GetFolderPath(System.Environment.SpecialFolder.ApplicationData);
// Создаем папку SW-Complex
var folderAppData = userAppData + "\\" + "SW-Complex";
//if (File.Exists(folderAppData) == false)
//{
Directory.CreateDirectory(folderAppData);
//}
swapp.SetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swFileLocationsMaterialDatabases, folderAppData); // задаем базы данных материалов
//swapp.SetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swFileLocationsMaterialDatabases, "C:\\Program Files\\SW-Complex"); // задаем базы данных материалов
_swPartDoc = ((PartDoc)(_swmodel));
var dbMatName = "vents-materials.sldmat";
var addMatXml = new ToSQL();
if (_swmodel.GetType() == (int)swDocumentTypes_e.swDocASSEMBLY)
{
_swmodel.ForceRebuild3(false);
Component2 comp = _swmodel.ISelectionManager.GetSelectedObject3(1);
PartDoc swPartAssem = comp.GetModelDoc();
//// удаляем материал
//swPartAssem.SetMaterialPropertyName("", "");
// применяем материал
swPartAssem.SetMaterialPropertyName2(confName, dbMatName, addMatXml.AddMaterialtoXml(levelId));
_swmodel.ClearSelection2(true);
_swmodel.ForceRebuild3(false);
}
else if (_swmodel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
// Если имя не пустое
if (partPath != "")
{
//// удаляем материал
//swPartDoc.SetMaterialPropertyName("", "");
// применяем материал
_swPartDoc.SetMaterialPropertyName2(confName, dbMatName, addMatXml.AddMaterialtoXml(levelId));
_swmodel.ForceRebuild3(false);
_swmodel.Save3((int)swSaveAsOptions_e.swSaveAsOptions_Silent, 0, 0);
swapp.CloseDoc(partPath);
swapp.ExitApp();
swapp = null;
}
else
{
//// удаляем материал
//swPartDoc.SetMaterialPropertyName(confName, "");
// применяем материал
_swPartDoc.SetMaterialPropertyName2(confName, dbMatName, addMatXml.AddMaterialtoXml(levelId));
}
}
}
catch (Exception ex)
{
//swapp.SendMsgToUser(ex.Message);
MessageBox.Show(ex.Message + ";" + ex.StackTrace);
Error = ex.Message;
}
}
public void PythonTraverseComponent_for_visualizationshapes(Component2 swComp, long nLevel, ref string asciitext, int nbody, ref int nvisshape, Component2 chbody_comp)
{
CultureInfo bz = new CultureInfo("en-BZ");
object[] bodies;
object bodyInfo;
bodies = (object[])swComp.GetBodies3((int)swBodyType_e.swAllBodies, out bodyInfo);
if (bodies != null)
if (bodies.Length > 0)
{
// Export the component shape to a .OBJ file representing its SW body(s)
nvisshape += 1;
string bodyname = "body_" + nbody;
string shapename = "body_" + nbody + "_" + nvisshape;
string obj_filename = this.save_dir_shapes + "\\" + shapename + ".obj";
ModelDoc2 swCompModel = (ModelDoc2)swComp.GetModelDoc();
if (!this.saved_shapes.ContainsKey(swCompModel.GetPathName()))
{
try
{
FileStream ostream = new FileStream(obj_filename, FileMode.Create, FileAccess.ReadWrite);
StreamWriter writer = new StreamWriter(ostream); //, new UnicodeEncoding());
string asciiobj = "";
if (this.swProgress != null)
this.swProgress.UpdateTitle("Exporting " + swComp.Name2 + " (tesselate) ...");
// Write the OBJ converted visualization shapes:
TesselateToObj.Convert(swComp, ref asciiobj, this.checkBox_saveUV.Checked, ref this.swProgress);
writer.Write(asciiobj);
writer.Flush();
ostream.Close();
this.saved_shapes.Add(swCompModel.GetPathName(), shapename);
}
catch (Exception)
{
System.Windows.Forms.MessageBox.Show("Cannot write to file: " + obj_filename);
}
}
else
{
// reuse the already-saved shape name
shapename = (String)saved_shapes[swCompModel.GetPathName()];
}
asciitext += String.Format(bz, "\n# Visualization shape \n", bodyname);
asciitext += String.Format(bz, "{0}_shape = chrono.ChObjShapeFile() \n", shapename);
asciitext += String.Format(bz, "{0}_shape.SetFilename(shapes_dir +'{0}.obj') \n", shapename);
object foo = null;
double[] vMatProperties = (double[])swComp.GetMaterialPropertyValues2((int)swInConfigurationOpts_e.swThisConfiguration, foo);
if (vMatProperties != null)
if (vMatProperties[0] != -1)
{
asciitext += String.Format(bz, "{0}_shape.SetColor(chrono.ChColor({1},{2},{3})) \n", shapename,
vMatProperties[0], vMatProperties[1], vMatProperties[2]);
asciitext += String.Format(bz, "{0}_shape.SetFading({1}) \n", shapename, vMatProperties[7]);
}
MathTransform absframe_chbody = chbody_comp.GetTotalTransform(true);
MathTransform absframe_shape = swComp.GetTotalTransform(true);
MathTransform absframe_chbody_inv = absframe_chbody.IInverse();
MathTransform relframe_shape = absframe_shape.IMultiply(absframe_chbody_inv); // row-ordered transf. -> reverse mult.order!
double[] amatr = (double[])relframe_shape.ArrayData;
double[] quat = GetQuaternionFromMatrix(ref relframe_shape);
asciitext += String.Format(bz, "{0}_level = chrono.ChAssetLevel() \n", shapename);
asciitext += String.Format(bz, "{0}_level.GetFrame().SetPos(chrono.ChVectorD({1},{2},{3})) \n", shapename,
amatr[9] *ChScale.L,
amatr[10]*ChScale.L,
amatr[11]*ChScale.L);
asciitext += String.Format(bz, "{0}_level.GetFrame().SetRot(chrono.ChQuaternionD({1},{2},{3},{4})) \n", shapename, quat[0], quat[1], quat[2], quat[3]);
asciitext += String.Format(bz, "{0}_level.GetAssets().push_back({0}_shape) \n", shapename);
asciitext += String.Format(bz, "{0}.GetAssets().push_back({1}_level) \n", bodyname, shapename);
}
// Recursive scan of subcomponents
Component2 swChildComp;
object[] vChildComp = (object[])swComp.GetChildren();
for (long i = 0; i < vChildComp.Length; i++)
{
swChildComp = (Component2)vChildComp[i];
if (swChildComp.Visible == (int)swComponentVisibilityState_e.swComponentVisible)
PythonTraverseComponent_for_visualizationshapes(swChildComp, nLevel + 1, ref asciitext, nbody, ref nvisshape, chbody_comp);
}
}
private void AddSuffix(LinkedList<CopiedFileNames> filesNames, Component2 swAddedComp, bool isAsync)
{
if (isAsync)
needWait = true;
var thisModel = (ModelDoc2)swAddedComp.GetModelDoc();
if (thisModel != null)
{
thisModel.ReloadOrReplace(false, thisModel.GetPathName(), true);
if (isAsync)
{
lock (workerLocker2)
Monitor.PulseAll(workerLocker2);
}
Decors.AddModelToList(this, thisModel);
string fileName;
if (ExistingFileDictionaryWithMdb(out fileName))
{
var strArr = File.ReadAllLines(fileName).ToList();
strArr.Add(thisModel.GetPathName().Substring(GetRootFolder(SwModel).Length));
File.SetAttributes(fileName, FileAttributes.Normal);
File.WriteAllLines(fileName, strArr);
File.SetAttributes(fileName, FileAttributes.Hidden);
}
#region ���������� �������� � ��������
try
{
if (filesNames != null)
{
var dictNames = new Dictionary<string, string>();
foreach (var copiedFileNamese in filesNames)
{
if (
!dictNames.ContainsKey(Path.GetFileName(copiedFileNamese.OldName)))
dictNames.Add(Path.GetFileName(copiedFileNamese.OldName),
Path.GetFileName(copiedFileNamese.NewName));
}
SwDMApplication swDocMgr = GetSwDmApp();
foreach (var copiedFileNamese in filesNames)
{
SwDmDocumentOpenError oe;
var swDoc = swDocMgr.GetDocument(copiedFileNamese.NewName,
SwDmDocumentType.
swDmDocumentUnknown
, true, out oe);
if (swDoc != null)
{
var names = (string[])swDoc.GetCustomPropertyNames();
foreach (var name in names)
{
SwDmCustomInfoType swDmCstInfoType;
string valueOfName = swDoc.GetCustomProperty(name, out swDmCstInfoType);
string lowValOfName = valueOfName.ToLower();
if (lowValOfName.Contains("@") &&
!lowValOfName.Contains("#") &&
(lowValOfName.Contains(".sld")))
{
foreach (var dictName in dictNames)
{
string lowDictName = dictName.Key.ToLower();
if (lowValOfName.Contains(lowDictName))
{
string oldModName =
valueOfName.Substring(
valueOfName.IndexOf(
dictName.Key.Split('.').First()),
dictName.Key.Length);
string newStrVal =
valueOfName.Replace(oldModName,
dictName.Value);
ModelDoc2 outMod;
if (GetModelByName(thisModel,
Path.GetFileName(
swDoc.FullName), true,
out outMod))
{
SetModelProperty(outMod, name, "",
swCustomInfoType_e.
swCustomInfoText,
newStrVal);
outMod.Save();
}
}
}
}
}
swDoc.CloseDoc();
}
}
}
}
catch
{
}
#endregion
if (Properties.Settings.Default.AutoSaveDrawings)
{
if (Properties.Settings.Default.ShowRPDBefore)
{
_frmPrm.SwAsmDoc.NewSelectionNotify -= _frmPrm.NewSelection;
bool select = swAddedComp.Select(false);
_frmPrm.SwAsmDoc.NewSelectionNotify += _frmPrm.NewSelection;
if (select)
CopyDrawings2(true, true, null);
}
else
{
if (swAddedComp.Select(false))
CopyDrawings2(true, true, null);
}
}
//thisModel.ReloadOrReplace(false, thisModel.GetPathName(), true);
RebuildEquation(swAddedComp);
if (Properties.Settings.Default.AutoRecalculateOnAdd)
{
try
{
RecalculateModel(thisModel);
}
catch
{
}
}
// ��������, ��� �� ������ ������ ������ � ������ ������ ��� ������ � �� ������ �� ��������
}
if (Properties.Settings.Default.AutoCutOff) CutOff();
if (Properties.Settings.Default.AutoRecalculateOnAdd) SwModel.EditRebuild3();
needWait = false;
//Logging.Log.Instance.TraceStop(startTime, "Stop");
if (isAsync)
{
lock (workerLocker)
Monitor.PulseAll(workerLocker);
}
}
public bool GetComponents(Component2 inParseComponent, LinkedList<Component2> outComponents,
bool isGetSubComponents, bool isRecursive)
{
bool ret = false;
try
{
if (!isRecursive)
outComponents.Clear();
if (inParseComponent != null)
{
var subComponents = (object[])inParseComponent.GetChildren();
// GetChildren ������ �� ���������� �������������. ���������� ����������� GetComponents��
if (subComponents != null && subComponents.Length == 0)
{
var swCompModel = (ModelDoc2)inParseComponent.GetModelDoc();
var tt = ((AssemblyDoc)swCompModel).GetComponents(true);
if (tt.Length != 0)
subComponents = tt;
}
if (subComponents != null)
foreach (Component2 subSwComp in subComponents)
{
outComponents.AddLast(subSwComp);
if (isGetSubComponents)
GetComponents(subSwComp, outComponents, true, true);
}
}
ret = true;
}
catch { }
return ret;
}
public static void Change_Color(ModelDoc2 swModel, string name, string color)
{
AssemblyDoc swAssembly = null;
Component2 swComp = null;
ModelDoc2 swCompDoc = null;
string compare_name = "";
string[] Componentsubstring;
bool boolstatus = false;
try
{
if (swModel.GetType() == (int)swDocumentTypes_e.swDocASSEMBLY)
{
swModel.ClearSelection2(true);
// boolstatus = swModel.Extension.SelectByID2(name + "@" + docname, "COMPONENT", 0, 0, 0, true, 0, null, 0);
// SelectionMgr SwSelMgr = swModel.SelectionManager;
swAssembly = (AssemblyDoc)swModel;
var Components = swAssembly.GetComponents(false);
// MessageBox.Show(Components.Length.ToString());
for (int i = 0; i < Components.Length; i++)
{
//swComp = swAssembly.GetComponentByName(name);
swComp = Components[i];
// MessageBox.Show(swComp.Name2);
if (swComp != null)
{
if (swComp.Name2.Contains(name))
{
var vMatProps = swComp.MaterialPropertyValues;
if (vMatProps == null)
{
swCompDoc = swComp.GetModelDoc();
if (swCompDoc == null)
{
return;
}
vMatProps = swCompDoc.MaterialPropertyValues;
}
if (color != "")
{
switch (color)
{
case "Green":
vMatProps[0] = 0; //Red
vMatProps[1] = 1; //Green
vMatProps[2] = 0; //Blue
break;
case "Blue":
vMatProps[0] = 0; //Red
vMatProps[1] = 0; //Green
vMatProps[2] = 1; //Blue
break;
case "Red":
vMatProps[0] = 1; //Red
vMatProps[1] = 0; //Green
vMatProps[2] = 0; //Blue
break;
default:
vMatProps[0] = 1; //Red
vMatProps[1] = 0; //Green
vMatProps[2] = 0; //Blue
break;
}
}
swComp.MaterialPropertyValues = vMatProps;
swModel.ClearSelection2(true);
}
}
}
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message + ex.StackTrace);
}
// boolstatus = swDoc.Extension.SelectByID2("195599_GRLA_F_1_8_QS_8_D-3@toolbox-tutorial", "COMPONENT", 0, 0, 0, false, 0, null, 0);
}
/// <summary>
/// 当结果返回True 时 表示两个零件不一样，结果false时表示 两个零件一样
/// </summary>
/// <param name="sendTocustomer"></param>
/// <param name="localModel"></param>
/// <returns></returns>
public bool CheckTwoParts(string sendTocustomer, string localModel)
{
bool different1 = false;
bool different2 = false;
swApp = ConnectToSolidWorks();
// swApp = ConnectToSolidWorks();
//加载参考关系零件
swApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swLoadExternalReferences, (int)swLoadExternalReferences_e.swLoadExternalReferences_ChangedOnly);
//后台模式 前台不显示界面
swApp.EnableBackgroundProcessing = true;
//禁止记录文件路径
swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swLockRecentDocumentsList, true);
swApp.OpenDoc(localModel, 1);
swApp.OpenDoc(sendTocustomer, 1);
ModelDoc2 swModel = (ModelDoc2)swApp.ActiveDoc;
string LocalPath = System.IO.Directory.GetParent(swModel.GetPathName()).ToString();
string tempAssembly = swApp.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplateAssembly);
AssemblyDoc assemblyDoc = (AssemblyDoc)swApp.NewDocument(tempAssembly, 0, 0, 0);
Component2 insertComponentSendtoCustomer = assemblyDoc.AddComponent5(sendTocustomer, 0, "", false, "", 0, 0, 0);
Component2 insertComponentLocal = assemblyDoc.AddComponent5(localModel, 0, "", false, "", 0, 0, 0);
string sendSelect = insertComponentSendtoCustomer.GetSelectByIDString();
string localSelect = insertComponentLocal.GetSelectByIDString();
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b1 = swModel.Extension.SelectByID2("Point1@Origin" + "@" + sendSelect, "EXTSKETCHPOINT", 0, 0, 0, false, 0, null, 0);
bool b2 = swModel.Extension.SelectByID2("Point1@Origin" + "@" + localSelect, "EXTSKETCHPOINT", 0, 0, 0, true, 0, null, 0);
int longstatus;
Mate2 mate2 = assemblyDoc.AddMate5(20, -1, false, 0, 0.001, 0.001, 0.001, 0.001, 0, 0, 0, false, false, 0, out longstatus);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.SaveAs(LocalPath + @"\TopCheck.sldasm");
//不显示特征树
//swModel.Extension.HideFeatureManager(true);
swModel.ClearSelection2(true);
//swModel.FeatureManager.ViewFeatures = false;
//FeatureManager featureManager = swModel.FeatureManager;
//禁用特征树
//featureManager.EnableFeatureTree = false;
// swModel.FeatureManager.EnableFeatureTreeWindow = false;
#region first join
Component2 sendToCustomerBodies = default(Component2);
List <Component2> sendToCustomerBodiesList = new List <Component2>();
object swFaceOrPlane = default(object);
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out sendToCustomerBodies);
sendToCustomerBodies.Select(true);
assemblyDoc.FixComponent();
sendToCustomerBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
object[] splits = sendToCustomerBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "localBodies-1";
ModelDoc2 compModel = default(ModelDoc2);
compModel = (ModelDoc2)sendToCustomerBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
bool ret;
ret = sendToCustomerBodies.SaveVirtualComponent(compName);
sendToCustomerBodiesList.Add(sendToCustomerBodies);
insertComponentSendtoCustomer.Select(false);
swModel = (ModelDoc2)sendToCustomerBodies.GetModelDoc2();
#region 获取所有零件中的零件，每一个实体做一次反切
List <string> bodyNamesCustomer = new List <string>();
PartDoc swPart = null;
object vBody;
swPart = (PartDoc)swModel;
// Solid bodies
object[] vBodyArr = null;
Body2 swBody = default(Body2);
MathTransform swMathTrans = null;
vBodyArr = (object[])swPart.GetBodies2((int)swBodyType_e.swSolidBody, true);
if ((vBodyArr != null))
{
// Debug.Print(" Number of solid bodies: " + vBodyArr.Length);
foreach (object vBody_loopVariable in vBodyArr)
{
vBody = vBody_loopVariable;
swBody = (Body2)vBody;
string[] vConfigName = null;
vConfigName = (string[])swModel.GetConfigurationNames();
string sMatDB = "";
string sMatName = swBody.GetMaterialPropertyName("", out sMatDB);
//bRet = swBody.RemoveMaterialProperty((int)swInConfigurationOpts_e.swAllConfiguration, (vConfigName));
//Debug.Print("Body--> " + swBody.Name + " " + "");
bodyNamesCustomer.Add(swBody.Name);
}
}
//如果实体数量大于1，则继续新建对应数量的join 实体。
OnlyKeepNamedBody(bodyNamesCustomer[0], sendToCustomerBodies.GetSelectByIDString(), assemblyDoc, sendToCustomerBodies, insertComponentSendtoCustomer, ref different1);
if (bodyNamesCustomer.Count > 1)
{
assemblyDoc.EditAssembly();
for (int i = 0; i < bodyNamesCustomer.Count - 1; i++)
{
Component2 returnpart = default(Component2);
var partSelect = CreateNewJoinPart(assemblyDoc, insertComponentSendtoCustomer, insertComponentLocal, swModel, "localBodies-" + (i + 2), out returnpart);
sendToCustomerBodiesList.Add(returnpart);
OnlyKeepNamedBody(bodyNamesCustomer[i + 1], partSelect, assemblyDoc, returnpart, insertComponentSendtoCustomer, ref different1);
}
}
// boolstatus = Part.Extension.SelectByID2("Join1[2]@localBodies-1@TopCheck", "SOLIDBODY", 0, 0, 0, True, 0, Nothing, 0)
//Dim myFeature As Object
//Set myFeature = Part.FeatureManager.InsertDeleteBody2(True)
#endregion 获取所有零件中的零件，每一个实体做一次反切
//assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
Feature theFeature;
//theFeature = swModel.FeatureByPositionReverse(0);
//if (theFeature.Name.Contains("Cavity"))
//{
// //theFeature.Select(true);
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.BreakAllExternalReferences();
// different1 = true;
// //JoinPart1 留下的: 发给客户的没有此部分。 而本地零件中有
//}
//else
//{
// //无法Join时表示 全切了。
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.EditSuppress();
//}
//sendToCustomerBodies.Select(true);
assemblyDoc.EditAssembly();
#endregion first join
#region sercond join2
Component2 localBodies = default(Component2);
List <Component2> LocalBodiesList = new List <Component2>();
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out localBodies);
localBodies.Select(true);
assemblyDoc.FixComponent();
localBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
splits = localBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "sendToCustomerBodies-1";
compModel = default(ModelDoc2);
compModel = (ModelDoc2)localBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
ret = localBodies.SaveVirtualComponent(compName);
LocalBodiesList.Add(localBodies);
insertComponentLocal.Select(false);
swModel = (ModelDoc2)localBodies.GetModelDoc2();
#region 获取所有零件中的零件，每一个实体做一次反切
List <string> bodyNamesLocal = new List <string>();
PartDoc swPart2 = null;
object vBody2;
swPart2 = (PartDoc)swModel;
// Solid bodies
object[] vBodyArr2 = null;
Body2 swBody2 = default(Body2);
MathTransform swMathTrans2 = null;
vBodyArr2 = (object[])swPart2.GetBodies2((int)swBodyType_e.swSolidBody, true);
if ((vBodyArr2 != null))
{
// Debug.Print(" Number of solid bodies: " + vBodyArr.Length);
foreach (object vBody_loopVariable in vBodyArr2)
{
vBody2 = vBody_loopVariable;
swBody2 = (Body2)vBody2;
string[] vConfigName = null;
vConfigName = (string[])swModel.GetConfigurationNames();
string sMatDB = "";
string sMatName = swBody2.GetMaterialPropertyName("", out sMatDB);
//bRet = swBody.RemoveMaterialProperty((int)swInConfigurationOpts_e.swAllConfiguration, (vConfigName));
bodyNamesLocal.Add(swBody2.Name);
}
}
//如果实体数量大于1，则继续新建对应数量的join 实体。
OnlyKeepNamedBody(bodyNamesLocal[0], localBodies.GetSelectByIDString(), assemblyDoc, localBodies, insertComponentLocal, ref different2);
if (bodyNamesLocal.Count > 1)
{
assemblyDoc.EditAssembly();
for (int i = 0; i < bodyNamesLocal.Count - 1; i++)
{
Component2 returnpart = default(Component2);
var partSelect = CreateNewJoinPart(assemblyDoc, insertComponentSendtoCustomer, insertComponentLocal, swModel, "sendToCustomerBodies-" + (i + 2), out returnpart);
LocalBodiesList.Add(returnpart);
OnlyKeepNamedBody(bodyNamesLocal[i + 1], partSelect, assemblyDoc, returnpart, insertComponentLocal, ref different2);
}
}
// boolstatus = Part.Extension.SelectByID2("Join1[2]@localBodies-1@TopCheck", "SOLIDBODY", 0, 0, 0, True, 0, Nothing, 0)
//Dim myFeature As Object
//Set myFeature = Part.FeatureManager.InsertDeleteBody2(True)
#endregion 获取所有零件中的零件，每一个实体做一次反切
//assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
//theFeature = swModel.FeatureByPositionReverse(0);
//swModel = (ModelDoc2)localBodies.GetModelDoc2();
//theFeature = swModel.FeatureByPositionReverse(0);
//if (theFeature.Name.Contains("Cavity"))
//{
// //theFeature.Select(true);
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + localBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.BreakAllExternalReferences();
// different2 = true;
// //JoinPart2 留下的: 发给客户的有此部分。 而本地零件中没有
//}
//else
//{
// //无法Join时表示 全切了。
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.EditSuppress();
//}
//localBodies.Select(true);
//assemblyDoc.EditAssembly();
#endregion sercond join2
#region joinPartPublic
Component2 publicBodies = default(Component2);
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out publicBodies);
publicBodies.Select(true);
assemblyDoc.FixComponent();
publicBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
splits = publicBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "publicBodies";
compModel = default(ModelDoc2);
compModel = (ModelDoc2)publicBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
ret = publicBodies.SaveVirtualComponent(compName);
swModel.ClearSelection();
foreach (var item in sendToCustomerBodiesList)
{
item.Select(false);
assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
swModel = (ModelDoc2)publicBodies.GetModelDoc2();
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
if (theFeature.Name.Contains("Cavity"))
{
//theFeature.Select(true);
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + publicBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
swModel.BreakAllExternalReferences();
//joinPartPublic 留下的: 发给客户的有此部分。 而本地零件中没有
}
else
{
}
}
foreach (var item in LocalBodiesList)
{
item.Select(false);
assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
swModel = (ModelDoc2)publicBodies.GetModelDoc2();
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
if (theFeature.Name.Contains("Cavity"))
{
//theFeature.Select(true);
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + publicBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
swModel.BreakAllExternalReferences();
//joinPartPublic 留下的: 发给客户的有此部分。 而本地零件中没有
}
else
{
}
}
publicBodies.Select(true);
assemblyDoc.EditAssembly();
#endregion joinPartPublic
foreach (var item in sendToCustomerBodiesList)
{
item.Select(false);
setColour(Color.Red);
}
foreach (var item in LocalBodiesList)
{
item.Select(false);
setColour(Color.Blue);
}
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ClearSelection2(true);
insertComponentLocal.Select(false);
insertComponentSendtoCustomer.Select(true);
swModel.HideComponent2();
swModel.ClearSelection2(true);
publicBodies.Select(false);
assemblyDoc.SetComponentTransparent(true);
setColour(Color.Green);
swModel.EditRebuild3();
swModel.Save();
swModel.SaveAs3(LocalPath + @"\01_CheckResult.sldprt", 0, 0);
swApp.CloseDoc("TopCheck.sldasm");
swApp.CloseAllDocuments(true);
swApp.OpenDoc(LocalPath + @"\01_CheckResult.sldprt", 1);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ShowNamedView2("*Isometric", 7);
swModel.ViewZoomtofit2();
swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swLockRecentDocumentsList, false);
try
{
System.IO.File.Delete(LocalPath + @"\TopCheck.sldasm");
System.IO.File.Delete(LocalPath + @"\localBodies.sldprt");
System.IO.File.Delete(LocalPath + @"\sendToCustomerBodies.sldprt");
System.IO.File.Delete(LocalPath + @"\publicBodies.sldprt");
}
catch (Exception)
{
}
//第二次反向剪切
swApp.CloseDoc(sendTocustomer);
swApp.CloseDoc(localModel);
swModel.FeatureManager.EnableFeatureTree = true;
swApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swLoadExternalReferences, 2);
if (different1 == false && different2 == false)
{
return(false);
}
else
{
return(true);
}
}
public void StoreToSelection(SelectionMgr swSelMgr, ref AttributeDef mdefattr_chbody)//, ref AttributeDef defattr_chconveyor)
{
System.Windows.Forms.MessageBox.Show("StoreToSelection()");
// If user pressed OK, apply settings to all selected parts (i.e. ChBody in C::E):
for (int isel = 1; isel <= swSelMgr.GetSelectedObjectCount2(-1); isel++)
{
if ((swSelectType_e)swSelMgr.GetSelectedObjectType3(isel, -1) == swSelectType_e.swSelCOMPONENTS)
{
Component2 swPart = (Component2)swSelMgr.GetSelectedObject6(isel, -1);
ModelDoc2 swPartModel = (ModelDoc2)swPart.GetModelDoc();
// fetch SW attribute with Chrono parameters for ChBody
SolidWorks.Interop.sldworks.Attribute myattr = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(mdefattr_chbody, 0);
if (myattr == null)
{
// if not already added to part, create and attach it
myattr = mdefattr_chbody.CreateInstance5(swPartModel, swPart, "Chrono ChBody data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
swPartModel.ForceRebuild3(false); // needed?
if (myattr == null)
{
System.Windows.Forms.MessageBox.Show("myattr null in setting!!");
}
}
((Parameter)myattr.GetParameter("collision_on")).SetDoubleValue2(
Convert.ToDouble(m_collide), (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("friction")).SetDoubleValue2(
m_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("rolling_friction")).SetDoubleValue2(
m_rolling_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("spinning_friction")).SetDoubleValue2(
m_spinning_friction, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("restitution")).SetDoubleValue2(
m_restitution, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_margin")).SetDoubleValue2(
m_collision_margin, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_envelope")).SetDoubleValue2(
m_collision_envelope, (int)swInConfigurationOpts_e.swThisConfiguration, "");
((Parameter)myattr.GetParameter("collision_family")).SetDoubleValue2(
(double)m_collision_family, (int)swInConfigurationOpts_e.swThisConfiguration, "");
/*
* // fetch SW attribute with Chrono parameters for ChConveyor
* SolidWorks.Interop.sldworks.Attribute myattr_conveyor = (SolidWorks.Interop.sldworks.Attribute)swPart.FindAttribute(defattr_chconveyor, 0);
* if (myattr_conveyor == null)
* {
* // if not already added to part, create and attach it
* myattr_conveyor = defattr_chconveyor.CreateInstance5(swPartModel, swPart, "Chrono ChConveyor data", 0, (int)swInConfigurationOpts_e.swThisConfiguration);
* if (myattr_conveyor == null)
* System.Windows.Forms.MessageBox.Show("myattr null in setting!!");
* }
*
* ((Parameter)myattr_conveyor.GetParameter("conveyor_speed")).SetDoubleValue2(
* m_conveyor_speed, (int)swInConfigurationOpts_e.swThisConfiguration, "");
*/
}
}
}
/// Convert a SolidWorks component to Wavefront OBJ mesh
///
public static void Convert(Component2 swComp, ref string asciitext, bool saveUV, ref UserProgressBar swProgress)
{
StringBuilder textbuilder = new StringBuilder();
Body2 swBody = default(Body2);
object[] vBodies = null;
object[] vBodiesSolid = null;
object[] vBodiesSheet = null;
object vBodyInfo;
int[] BodiesInfo = null;
int j = 0;
ModelDoc2 swModel;
swModel = (ModelDoc2)swComp.GetModelDoc();
vBodiesSolid = (object[])swComp.GetBodies3((int)swBodyType_e.swSolidBody, out vBodyInfo);
vBodiesSheet = (object[])swComp.GetBodies3((int)swBodyType_e.swSheetBody, out vBodyInfo);
BodiesInfo = (int[])vBodyInfo;
if (vBodiesSolid != null && vBodiesSheet == null)
{
vBodies = vBodiesSolid;
}
if (vBodiesSolid == null && vBodiesSheet != null)
{
vBodies = vBodiesSheet;
}
if (vBodiesSolid != null && vBodiesSheet != null)
{
vBodies = vBodiesSheet.Concat(vBodiesSolid).ToArray();
}
// vBodies = (object[])swComp.GetBodies3((int)swBodyType_e.swSolidBody, out vBodyInfo);
if (vBodies != null)
{
int iNumBodies = vBodies.Length;
int iNumSolidBodies = 0;
int iNumSheetBodies = 0;
int iNumTesselatedBodies = 0;
if (iNumBodies > 0)
{
asciitext += "# Wavefront .OBJ file for tesselated shape: " + swComp.Name2 + " path: " + swModel.GetPathName() + "\n\n";
}
int group_vstride = 0;
int group_nstride = 0;
// Loop through bodies
for (j = 0; j <= vBodies.Length - 1; j++)
{
swBody = (Body2)vBodies[j];
int nBodyType = (int)swBody.GetType();
if (nBodyType == (int)swBodyType_e.swSheetBody)
{
iNumSheetBodies++;
}
if (nBodyType == (int)swBodyType_e.swSolidBody)
{
iNumSolidBodies++;
}
if ((nBodyType == (int)swBodyType_e.swSheetBody ||
nBodyType == (int)swBodyType_e.swSolidBody) &&
!swBody.Name.StartsWith("COLL.") &&
swBody.Visible)
{
iNumTesselatedBodies++;
CultureInfo bz = new CultureInfo("en-BZ");
//asciitext += "g body_" + iNumTesselatedBodies + "\n";
textbuilder.Append("g body_" + iNumTesselatedBodies + "\n");
Face2 swFace = null;
Tessellation swTessellation = null;
bool bResult = false;
// Pass in null so the whole body will be tessellated
swTessellation = (Tessellation)swBody.GetTessellation(null);
// Set up the Tessellation object
swTessellation.NeedFaceFacetMap = true;
swTessellation.NeedVertexParams = true;
swTessellation.NeedVertexNormal = true;
swTessellation.ImprovedQuality = true;
// How to handle matches across common edges
swTessellation.MatchType = (int)swTesselationMatchType_e.swTesselationMatchFacetTopology;
// Do it
if (swProgress != null)
{
swProgress.UpdateTitle("Exporting (tesselate process) ...");
}
bResult = swTessellation.Tessellate();
// Get the number of vertices and facets
//System.Windows.Forms.MessageBox.Show("Body n." + j + " vert.num=" + swTessellation.GetVertexCount());
//Debug.Print("Number of vertices: " + swTessellation.GetVertexCount());
//Debug.Print("Number of facets: " + swTessellation.GetFacetCount());
// Now get the facet data per face
int[] aFacetIds;
int iNumFacetIds;
int[] aFinIds;
int[] aVertexIds;
double[] aNormal;
double[] aVertexCoords1;
double[] aVertexCoords2;
double[] aVertexParams;
int numv = swTessellation.GetVertexCount();
// Write all vertexes
string mline;
for (int iv = 0; iv < numv; iv++)
{
if ((swProgress != null) && (iv % 200 == 0))
{
swProgress.UpdateTitle("Exporting (write " + iv + "-th vertex in .obj) ...");
}
aVertexCoords1 = (double[])swTessellation.GetVertexPoint(iv);
mline = "v " + (aVertexCoords1[0] * ChScale.L).ToString("f6", bz)
+ " " + (aVertexCoords1[1] * ChScale.L).ToString("f6", bz)
+ " " + (aVertexCoords1[2] * ChScale.L).ToString("f6", bz)
+ "\n";
textbuilder.Append(mline);
}
// Write all normals
for (int iv = 0; iv < numv; iv++)
{
if ((swProgress != null) && (iv % 200 == 0))
{
swProgress.UpdateTitle("Exporting (write " + iv + "-th normal in .obj) ...");
}
aNormal = (double[])swTessellation.GetVertexNormal(iv);
mline = "vn " + aNormal[0].ToString("f3", bz)
+ " " + aNormal[1].ToString("f3", bz)
+ " " + aNormal[2].ToString("f3", bz)
+ "\n";
textbuilder.Append(mline);
}
if (nBodyType == (int)swBodyType_e.swSheetBody) // for sheets, save two-sided triangles
{
for (int iv = 0; iv < numv; iv++)
{
if ((swProgress != null) && (iv % 200 == 0))
{
swProgress.UpdateTitle("Exporting (write " + iv + "-th normal in .obj) ...");
}
aNormal = (double[])swTessellation.GetVertexNormal(iv);
mline = "vn " + (-aNormal[0]).ToString("f3", bz)
+ " " + (-aNormal[1]).ToString("f3", bz)
+ " " + (-aNormal[2]).ToString("f3", bz)
+ "\n";
textbuilder.Append(mline);
}
}
// Write all UV (also with '0' as third value, for compatibility with some OBJ reader)
if (saveUV)
{
for (int iv = 0; iv < numv; iv++)
{
if ((swProgress != null) && (iv % 200 == 0))
{
swProgress.UpdateTitle("Exporting (write " + iv + "-th UV in .obj) ...");
}
aVertexParams = (double[])swTessellation.GetVertexParams(iv);
mline = "vt " + aVertexParams[0].ToString("f4", bz)
+ " " + aVertexParams[1].ToString("f4", bz)
+ " " + "0"
+ "\n";
textbuilder.Append(mline);
}
}
// Loop over faces
swFace = (Face2)swBody.GetFirstFace();
while (swFace != null)
{
aFacetIds = (int[])swTessellation.GetFaceFacets(swFace);
iNumFacetIds = aFacetIds.Length;
for (int iFacetIdIdx = 0; iFacetIdIdx < iNumFacetIds; iFacetIdIdx++)
{
if ((swProgress != null) && (iFacetIdIdx % 100 == 0))
{
swProgress.UpdateTitle("Exporting (write " + iFacetIdIdx + "-th face in .obj) ...");
}
mline = "f";
aFinIds = (int[])swTessellation.GetFacetFins(aFacetIds[iFacetIdIdx]);
// There should always be three fins per facet
for (int iFinIdx = 0; iFinIdx < 3; iFinIdx++)
{
aVertexIds = (int[])swTessellation.GetFinVertices(aFinIds[iFinIdx]);
// Three fins per face, two vertexes each fin,
// only the 1st vertex of two is needed (because of sharing)
if (saveUV)
{
mline += " " + (aVertexIds[0] + group_vstride + 1) + "/"
+ (aVertexIds[0] + group_vstride + 1) + "/"
+ (aVertexIds[0] + group_nstride + 1);
}
else
{
mline += " " + (aVertexIds[0] + group_vstride + 1) + "//"
+ (aVertexIds[0] + group_nstride + 1);
}
}
mline += "\n";
textbuilder.Append(mline);
}
swFace = (Face2)swFace.GetNextFace();
}
swFace = (Face2)swBody.GetFirstFace();
if (nBodyType == (int)swBodyType_e.swSheetBody) // for sheets, save two-sided triangles
{
while (swFace != null)
{
aFacetIds = (int[])swTessellation.GetFaceFacets(swFace);
iNumFacetIds = aFacetIds.Length;
for (int iFacetIdIdx = 0; iFacetIdIdx < iNumFacetIds; iFacetIdIdx++)
{
if ((swProgress != null) && (iFacetIdIdx % 100 == 0))
{
swProgress.UpdateTitle("Exporting (write " + iFacetIdIdx + "-th face in .obj) ...");
}
mline = "f";
aFinIds = (int[])swTessellation.GetFacetFins(aFacetIds[iFacetIdIdx]);
for (int iFinIdx = 2; iFinIdx >= 0; iFinIdx--)
{
aVertexIds = (int[])swTessellation.GetFinVertices(aFinIds[iFinIdx]);
if (saveUV)
{
mline += " " + (aVertexIds[0] + group_vstride + 1) + "/"
+ (aVertexIds[0] + group_vstride + 1) + "/"
+ (aVertexIds[0] + swTessellation.GetVertexCount() + group_nstride + 1);
}
else
{
mline += " " + (aVertexIds[0] + group_vstride + 1) + "//"
+ (aVertexIds[0] + swTessellation.GetVertexCount() + group_nstride + 1);
}
}
mline += "\n";
textbuilder.Append(mline);
}
swFace = (Face2)swFace.GetNextFace();
}
}
group_vstride += swTessellation.GetVertexCount();
group_nstride += swTessellation.GetVertexCount();
if (nBodyType == (int)swBodyType_e.swSheetBody) // for sheets: two-sided triangles
{
group_nstride += swTessellation.GetVertexCount();
}
}
} // end loop on bodies
} // not null body
asciitext += textbuilder.ToString();
}
private bool GetComponentModel(ModelDoc2 swModel, Component2 inComp, out ModelDoc2 swCompModel, out string modelFileName)
{
int i = 0;
modelFileName = "";
do
{
var compState = (swComponentSuppressionState_e)inComp.GetSuppression();
if (compState.ToString() == "swComponentSuppressed")
inComp.SetSuppression2((int)swComponentSuppressionState_e.swComponentFullyResolved);
swCompModel = (ModelDoc2)inComp.GetModelDoc();
if (swCompModel == null)
{
string newModelPath = CheckIsCompInOurLib(inComp.GetPathName());
if (inComp.Select(false))
{
((AssemblyDoc)swModel).ReplaceComponents(newModelPath, "", true, true);
//((AssemblyDoc) swModel).ComponentReload();
swCompModel = inComp.IGetModelDoc();
//((AssemblyDoc) swModel).OpenCompFile();
//��� �������������� ��������� ���������� OpenCompFile �� ��������!
if (((ModelDoc2)_iSwApp.ActiveDoc).GetPathName() != swModel.GetPathName())
swCompModel = (ModelDoc2)_iSwApp.ActiveDoc;
}
}
i++;
} while (swCompModel == null && i < 10);
if (swCompModel != null)
modelFileName = swCompModel.GetPathName();
else
{
MessageBox.Show(@"��������� " + inComp.Name + @"�� ���������!", MyTitle, MessageBoxButtons.OK,
MessageBoxIcon.Exclamation);
return false;
}
return true;
}
//k - ���������� ����������� ��� ������������
private void SaveAsComponent(ModelDoc2 swModel, Component2 inComp, bool isFirstLevel, LinkedList<CopiedFileNames> filesNames, int k)
{
string offset = string.Empty;
//for (int i = 0; i < k; i++)
// offset += " ";
try
{
string strSubCompOldFileNameFromComponent = inComp.GetPathName();
if (strSubCompOldFileNameFromComponent == "")
{
var swCompModel = (ModelDoc2)inComp.GetModelDoc();
if (swCompModel != null)
strSubCompOldFileNameFromComponent = swCompModel.GetPathName();
else
return;
}
bool isModelAlreadyReplaced =
filesNames.Any(oldfile => oldfile.OldName == strSubCompOldFileNameFromComponent);
if (!isModelAlreadyReplaced)
{
ModelDoc2 swCompModel;
string strSubCompOldFileNameFromModel;
if (GetComponentModel(swModel, inComp, out swCompModel, out strSubCompOldFileNameFromModel))
{
bool isAuxiliary = (swCompModel.get_CustomInfo2("", "Auxiliary") == "Yes");
bool isAccessory = (swCompModel.get_CustomInfo2("", "Accessories") == "Yes");
string strSubCompNewFileName;
if (GetComponentNewFileName(swModel, isAuxiliary, isAccessory,
isFirstLevel, strSubCompOldFileNameFromModel,
out strSubCompNewFileName))
{
bool isCopyError = false;
try
{
if (!File.Exists(strSubCompNewFileName)) //���������
{
File.Copy(strSubCompOldFileNameFromModel, strSubCompNewFileName, true);
}
}
catch (Exception)
{
MessageBox.Show(@"�� ������� ��������� ���� " + strSubCompNewFileName,
MyTitle, MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
isCopyError = true;
}
if (!isCopyError)
{
filesNames.AddLast(new CopiedFileNames(strSubCompOldFileNameFromComponent,
strSubCompNewFileName));
File.SetAttributes(strSubCompNewFileName, FileAttributes.Normal);
var subComps = new LinkedList<Component2>();
if (GetComponents(inComp, subComps, false, false))
{
foreach (Component2 subcmp in subComps)
{
SaveAsComponent(swModel, subcmp, false, filesNames, k + 1);
}
}
SwDmDocumentOpenError oe;
SwDMApplication swDocMgr = GetSwDmApp();
var swDoc = (SwDMDocument8)swDocMgr.GetDocument(strSubCompNewFileName,
SwDmDocumentType.swDmDocumentAssembly,
false, out oe);
if (swDoc != null)
{
SwDMSearchOption src = swDocMgr.GetSearchOptionObject();
src.SearchFilters = 255;
object brokenRefVar;
var varRef = (object[])swDoc.GetAllExternalReferences2(src, out brokenRefVar);
if (varRef != null)
{
foreach (object t in varRef)
{
var strRef = (string)t;
string strRefFileName = Path.GetFileName(strRef);
string strNewRef = "";
foreach (CopiedFileNames oldfile in filesNames)
{
if (Path.GetFileName(oldfile.OldName).ToLower() == strRefFileName.ToLower())
{
strNewRef = oldfile.NewName;
break;
}
}
if (strNewRef != "")
swDoc.ReplaceReference(strRef, strNewRef);
}
}
swDoc.Save();
swDoc.CloseDoc();
}
if (isFirstLevel)
{
var outList1 = new LinkedList<Component2>();
if (inComp.Select(false))
((AssemblyDoc)swModel).ReplaceComponents(strSubCompNewFileName, "", false, true);
if (inComp.Select(false))
((AssemblyDoc)swModel).ComponentReload();
if (GetComponents(inComp, outList1, true, false))
{
foreach (var component in outList1)
{
var model = component.IGetModelDoc();
if (model != null && model.GetConfigurationCount() > 1)
{
int err = 0, wrn = 0;
var mod = SwApp.OpenDoc6(model.GetPathName(),
(int)swDocumentTypes_e.swDocPART,
0, "", ref err, ref wrn);
if (mod != null)
{
mod.ShowConfiguration2(component.ReferencedConfiguration);
mod.Save();
SwApp.CloseDoc(mod.GetPathName());
}
}
}
}
}
}
}
}
}
}
catch (Exception e)
{
Logging.Log.Instance.Fatal(e.Message + "SaveAsComponent()");
MessageBox.Show(e.Message, MyTitle, MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
}
return;
}
public void TableTopProcess(Component2 swAddedComp)
{
var mates = swAddedComp.GetMates();
Component2 firstComponent = null;
var swAddedCompModel = (ModelDoc2)swAddedComp.GetModelDoc();
bool? isLeft = null;
if (swAddedCompModel.GetCustomInfoValue("", "KitchenType").Contains("левая"))
isLeft = true;
else if (swAddedCompModel.GetCustomInfoValue("", "KitchenType").Contains("правая"))
isLeft = false;
if (isLeft == null)
return;
if (mates != null)
{
foreach (var mate in mates)
{
if (mate is Mate2)
{
var spec = (Mate2)mate;
int mec = spec.GetMateEntityCount();
if (mec > 1)
{
for (int ik = 0; ik < mec; ik++)
{
MateEntity2 me = spec.MateEntity(ik);
if (me.ReferenceComponent.Name.Contains(swAddedComp.Name))
{
string firstComp = spec.MateEntity(0).ReferenceComponent.Name.Split('/')[0];
swAddin.GetComponentByName(RootModel, firstComp, false, out firstComponent);
break;
}
}
}
}
}
}
if (firstComponent != null)
{
//привязать...
swAddin.AddMate(RootModel, firstComponent.FeatureByName("#swrfЗадняя"), swAddedComp.FeatureByName("#swrfЗадняя"), true);
}
bool status;
var swComponents = new LinkedList<Component2>();
if (swAddin.GetComponents(swRootComponent, swComponents, false, false))
{
double[] origBox = swAddedComp.GetBox(true, true);
double origaverx = Math.Min(origBox[3], origBox[0]) +
Math.Abs(origBox[3] - origBox[0]) / 2;
double origaverz = Math.Min(origBox[5], origBox[2]) +
Math.Abs(origBox[5] - origBox[2]) / 2;
var swCompModel = (ModelDoc2)firstComponent.GetModelDoc();
bool isAnglePartFirst = false, isUpPartfirst = false, isTabletopFirst = false;
if (swCompModel != null)
GetTypeProperty(swCompModel.GetCustomInfoValue("", "KitchenType"), out isAnglePartFirst, out isUpPartfirst, out isTabletopFirst);
if (isTabletopFirst || isUpPartfirst)
return;
string tmp = (bool)isLeft ? "#swrfЛевая" : "#swrfПравая";
if (isAnglePartFirst)
swAddin.AddMate(RootModel, firstComponent.FeatureByName("#swrfЗадняя2"), swAddedComp.FeatureByName(tmp), true);
else
swAddin.AddMate(RootModel, firstComponent.FeatureByName(tmp), swAddedComp.FeatureByName(tmp), true);
InfoForMate maxDistance = FindMinTopTable(swComponents, swAddedComp, isLeft);
InfoForMate maxDistance3 = FindMaxPlate(swComponents, swAddedComp, firstComponent, origaverx, origaverz, isAnglePartFirst, isLeft);
if (maxDistance.planeDist != null && maxDistance.planeSource != null && maxDistance3.distance > maxDistance.distance)//&& maxDistance3.planeSource.Name == maxDistance.planeSource.Name)
{
swModel.ClearSelection();
InfoForMate maxDistance2 = new InfoForMate(double.MinValue, null, null);
string tt = isAnglePartFirst ? "#swrfЗадняя2" : plateleft;
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", tt, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
maxDistance.planeDist.Select(true);
measure.Calculate(null);
if (measure.IsParallel && maxDistance2.distance < measure.Distance)
maxDistance2 = new InfoForMate(measure.Distance, firstComponent.FeatureByName(tt), null);
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateright, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
maxDistance.planeDist.Select(true);
measure.Calculate(null);
if (measure.IsParallel && maxDistance2.distance < measure.Distance)
maxDistance2 = new InfoForMate(measure.Distance, firstComponent.FeatureByName(plateright), null);
//if (maxDistance2.planeDist!=null)
// swAddin.AddMate(swModel, maxDistance2.planeDist, maxDistance.planeSource, true);//distToTopTable = new InfoForMate(maxDistance.distance, maxDistance2.planeDist, maxDistance.planeSource);//
swModel.ClearSelection();
maxDistance.planeDist.Select(false);
maxDistance2.planeDist.Select(true);
measure.Calculate(null);
maxDistance.distance = measure.Distance;
}
else
{
maxDistance = maxDistance3;//maxDistance = FindMaxPlate(swComponents, swAddedComp, firstComponent, origaverx, origaverz,isAnglePartFirst);
//if (maxDistance.planeDist != null && maxDistance.planeSource != null)
//{
// if (maxDistance.planeSource.Name != "#swrfЗадняя2")
// swAddin.AddMate(swModel, maxDistance.planeSource, swAddedComp.FeatureByName(maxDistance.planeSource.Name), true);
// else
// {
// maxDistance.planeSource.Select(false);
// swAddedComp.FeatureByName(plateleft).Select(true);
// measure.Calculate(null);
// double distanceleft = measure.Distance;
// maxDistance.planeSource.Select(false);
// swAddedComp.FeatureByName(plateright).Select(true);
// measure.Calculate(null);
// double distanceright = measure.Distance;
// if (distanceleft<distanceright)
// swAddin.AddMate(swModel, maxDistance.planeSource, swAddedComp.FeatureByName(plateleft), true);
// else
// swAddin.AddMate(swModel, maxDistance.planeSource, swAddedComp.FeatureByName(plateright), true);
// }
//}
}
double distance2;
swModel.ClearSelection();
if (!isAnglePartFirst)
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "Передняя", firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
else
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateleft, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", firstComponent.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
distance2 = measure.Distance * 1000;
//поменять размер..
var curModel = swAddedComp.GetModelDoc2();
bool isNumber = false;
OleDbConnection oleDb;
OleDbDataReader rd;
List<string> strObjNames = new List<string>();
string filePath = swAddedComp.GetPathName();
if (swAddin.OpenModelDatabase(curModel, out oleDb))
{
using (oleDb)
{
OleDbCommand cm;
cm = isNumber
? new OleDbCommand(
"SELECT * FROM objects WHERE number>0 ORDER BY number",
oleDb)
: new OleDbCommand("SELECT * FROM objects ORDER BY id", oleDb);
rd = cm.ExecuteReader();
while (rd.Read())
{
if (rd["caption"].ToString() == null || rd["caption"].ToString() == "" ||
rd["caption"].ToString().Trim() == "")
continue;
string strObjName = rd["name"].ToString();
if (filePath.Contains("_SWLIB_BACKUP"))
{
string pn = Path.GetFileNameWithoutExtension(filePath);
string last3 = pn.Substring(pn.Length - 4, 4);
string[] arr = strObjName.Split('@');
if (arr.Length != 3)
throw new Exception("что-то не так");
arr[2] = Path.GetFileNameWithoutExtension(arr[2]) + last3 + Path.GetExtension(arr[2]);
strObjName = string.Format("{0}@{1}@{2}", arr[0], arr[1], arr[2]);
}
strObjNames.Add(strObjName);
}
}
}
swAddin.SetObjectValue(curModel, strObjNames[0], 14, maxDistance.distance * 1000);
swAddin.SetObjectValue(curModel, strObjNames[1], 14, distance2);
}
}