/// <summary>
/// 任务流
/// </summary>
/// <returns></returns>
private int TestTaskFlow()
{
int ret = -1;
//string pattern = null;
//eidRead = "NULL";
//两种情况进入此处:1、超时跳出了do while,2、按了空格确认上电
if (readWriteIdHandle.IsTimeOut)
{
frmMain.DisplayLog("测试超时\r\n");
return(ret);
}
do
{
frmMain.DisplayLog("测试中...\r\n");
CmdProcess cmdProcess = new CmdProcess(); //cmd类
tool = new ThirdPartyTool()
{
ToolDirectory = "Microsoft Azure Sphere SDK",
ToolName = "InitializeCommandPrompt",
Cmd = "azsphere device wifi show-status"
};
string strRet;
#region //获取OS版本
//strRet = cmdProcess.ExeCommand("", "azsphere device show-ota-status");//"azsphere device wifi show-status"
//if (strRet.Contains("error: Could not connect to the device."))
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
//if (strRet.Contains("is not a valid value"))
//{
// frmMain.DisplayLog(string.Format("未claim设备 获取OS版本失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
#endregion
//对比模块MAC地址-标签MAC地址
strRet = cmdProcess.ExeCommand("", "azsphere device wifi show-status");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
//ret = DeviceCheck(tool, out strRet);
//if (ret!=0)
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
string mouduleMac = cmdProcess.GetValueByKeyword(strRet, "MAC Address");
if (mouduleMac != labelSn)
{
frmMain.DisplayLog(string.Format("MAC检查：模块{0}，标签{1} 对比不一致 FAIL\r\n", mouduleMac, labelSn));
break;
}
frmMain.DisplayLog(string.Format("MAC检查：模块{0}，标签{1} 对比一致 PASS\r\n", mouduleMac, labelSn));
//检查是否有测试程序
//azsphere device sideload show-status
//azsphere device sideload delete
//azsphere device sideload deploy -p mt_app.img
//删除当前程序
frmMain.DisplayLog("当前程序删除中...\r\n");
strRet = cmdProcess.ExeCommand("", "azsphere device sideload delete");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("当前程序删除： 失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog("当前程序删除：成功 PASS\r\n");
Thread.Sleep(500);
//Side load（加载测试固件）
frmMain.DisplayLog("测试固件加载中...\r\n");
strRet = cmdProcess.ExeCommand("", string.Format("azsphere device sideload deploy -p ../app/{0}", TestAppName));//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
//tool.Cmd = "azsphere device sideload deploy -p mt_app.img";
//ret = DeviceCheck(tool, out strRet);
//if (ret != 0)
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("加载测试固件：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog(string.Format("加载测试固件：成功 PASS\r\n", strRet));
string pinTestRetinfo;
//Socket复位
frmMain.DisplayLog("复位测试中...\r\n"); //成功 为有效信息
bool pinTestRet = PinTestBySocket("reset_tests", out pinTestRetinfo);
frmMain.DisplayLog(pinTestRetinfo + "\r\n"); //失败 为错误信息
if (!pinTestRet)
{
frmMain.DisplayLog("复位测试：失败 FAIL\r\n");//失败 为错误信息
break;
}
frmMain.DisplayLog("复位测试：合格 PASS\r\n");//成功 为有效信息
//Socket GPIO检查
frmMain.DisplayLog("GPIO测试中...\r\n");
pinTestRet = PinTestBySocket("get_gpios", out pinTestRetinfo);
frmMain.DisplayLog(pinTestRetinfo + "\r\n");//失败 为错误信息
if (!pinTestRet)
{
frmMain.DisplayLog("GPIO测试：测试失败 FAIL\r\n");//失败 为错误信息
break;
}
string errorStr;
bool gpioRet = GetGIPOResultBySocketRet(pinTestRetinfo, out errorStr);
//展示返回的GPIO数据
//strRet = strRet.Replace("P", "PASS").Replace("F", "FAIL") + "\r\n";
//frmMain.DisplayLog(strRet);
//GPIO结果显示
if (!gpioRet)
{
frmMain.DisplayLog("GPIO测试: 不合格 FAIL \r\n");
break;
}
frmMain.DisplayLog("GPIO测试：合格 PASS\r\n");//成功 为有效信息
#region 串口测试 复位和GPIO
////串口发送Reset System\r\n
//strRet = readWriteIdHandle.Read(ATReadCmd.ReadIdType.Reset);
//if (string.IsNullOrEmpty(strRet))
//{
// frmMain.DisplayLog(string.Format("复位命令未得到回应 串口失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
////if (!strRet.Contains("Get RST command"))
////{
//// frmMain.DisplayLog(string.Format("复位未得到回应 串口失败 FAIL\r\n详细：{0} \r\n", strRet));
//// break;
////}
////复位命令得到回应
//frmMain.DisplayLog(string.Format("复位中... \r\n"));
////跳出循环说明复位成功
//readWriteIdHandle.ReadRestInfo("init completed");
//frmMain.DisplayLog(string.Format("复位成功 PASS\r\n"));
////GPIO测试
////串口发送Reset System\r\n
//Thread.Sleep(1000);
//strRet = readWriteIdHandle.Read(ATReadCmd.ReadIdType.GPIOTest);
//if (string.IsNullOrEmpty(strRet))
//{
// frmMain.DisplayLog("GPIO测试命令未得到回应 串口失败 FAIL\r\n");
// break;
//}
////GPIO测试命令得到回应
////frmMain.DisplayLog("GPIO测试中... \r\n");
////string errorInfo;
////bool gpioRet = checkGIPOResult(strRet, out errorInfo);
//////展示返回的GPIO数据
////strRet = strRet.Replace("P", "PASS").Replace("F", "FAIL") + "\r\n";
////frmMain.DisplayLog(strRet);
//////GPIO结果显示
////if (!gpioRet)
////{
//// frmMain.DisplayLog(string.Format("GPIO测试:失败 FAIL \r\n详细：{0}\r\n", errorInfo));
//// break;
////}
////frmMain.DisplayLog("GPIO测试：成功 PASS\r\n");
#endregion
//删除APPtest
frmMain.DisplayLog("测试固件删除中...\r\n");
strRet = cmdProcess.ExeCommand("", "azsphere device sideload delete");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
//tool.Cmd = "azsphere device sideload deploy -p mt_app.img";
//ret = DeviceCheck(tool, out strRet);
//if (ret != 0)
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("测试固件删除：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog("测试固件删除：成功 PASS\r\n");
frmMain.DisplayLog("Wifi列表网络检查中...\r\n");
//检查网络 wifi表
strRet = cmdProcess.ExeCommand("", "azsphere device wifi list");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
if (!strRet.Contains("No networks found") && strRet.Contains("ID"))
{
//Get ID
string[] wifiIdList = cmdProcess.GetListByKeyword(strRet, "ID").ToArray();
foreach (var item in wifiIdList)
{
frmMain.DisplayLog("WIFI列表检查：含有WIFI列表ID,删除中...\r\n");
//不为空
if (!string.IsNullOrEmpty(item))
{
//删除ID
strRet = cmdProcess.ExeCommand("", string.Format("azsphere device wifi delete –i {0}", item));//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
return(ret);
}
//不包含成功信息且不包含
if (!strRet.Contains("Successfully removed network") && !strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("WIFI列表ID删除：失败 FAIL\r\n详细：{0} \r\n", strRet));
return(ret);
}
}
}
}
frmMain.DisplayLog("WIFI列表检查：PASS\r\n");
//性能测试
frmMain.DisplayLog("capabilties测试中...\r\n");
Capability:
strRet = cmdProcess.ExeCommand("", "azsphere device capability show-attached");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("capabilties测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
List <string> capabilitiesList = cmdProcess.GetListCapabilitiesKeyword(strRet, "Enable");
if (capabilitiesList.Count > 0)
{
//manufacture set complete status，只能设置一次，设置后就不能够RF测试和校准了，测试阶段不要轻易尝试。
#region
if (IsManufactureComplete == 1)
{
strRet = cmdProcess.ExeCommand("", "manufacture set complete status");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog(string.Format("已设置制作完成状态，继续测试capabilties中... \r\n详细：{0} \r\n", strRet));
goto Capability;
}
#endregion
frmMain.DisplayLog(string.Format("capabilties测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog("capabilties测试：PASS\r\n");
//E-fuse测试
tool = new ThirdPartyTool()
{
ToolDirectory = "RFToolCli",
Cmd = string.Format("RfSettingsTool check --expected ../bin/{0}", EfuseBin)
};
//strRet = cmdProcess.ExeCommand(tool);//"azsphere device wifi show-status"
//if (strRet.Contains("error"))
//{
// frmMain.DisplayLog(string.Format("E-fuse测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
//python
//tool.Cmd = "python RunHeaderTest.py ";//reset_system
//tool.ToolDirectory = "PC";
//strRet = cmdProcess.ExeCommand(tool, "");
//if (strRet.Contains("error"))
//{
// frmMain.DisplayLog(string.Format("E-fuse测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
//E-fuse具体测试内容
frmMain.DisplayLog("e-fuse测试中...\r\n");
strRet = cmdProcess.ExeCommand(tool, "");
string hasReadFlag = "Comparing configurations.";
string startFlag = "Reading configuration data from device.";
string erroInfo = StringHelp.SubCentre(strRet, startFlag, "\r\n\r\n");
if (!strRet.Contains(hasReadFlag))
{
frmMain.DisplayLog(string.Format("E-fuse测试：命令失败 \r\n详细：{0} \r\n", erroInfo));
break;
}
strRet = StringHelp.SubCentre(strRet, hasReadFlag, "\r\n\r\n");
frmMain.DisplayLog(strRet + "\r\n");
if (strRet.Contains("ERROR") || strRet.Contains("异常"))
{
frmMain.DisplayLog("E-fuse测试结果： FAIL \r\n");
break;
}
frmMain.DisplayLog("E-fuse测试：PASS\r\n");
ret = 0;
//cd RFToolCli
//List<string> listValue = readWriteIdHandle.ReadId();
//if (listValue.Count <= 3)
//{
// break;
//}
////多组：1,1,01,01,,,40,0*61
//int sum = 0;
//string[] arryData;
//try
//{
// foreach (string strData in listValue)
// {
// arryData = strData.Split(',');
// 应滤除其他可视卫星
// int cn0Value = int.Parse(arryData[6]);
// sum += cn0Value;
// }
//}
//catch (Exception ex)
//{
// frmMain.DisplayLog(string.Format("数据解析错误：{0}\r\n", ex.Message));
// break;
//}
//int argVale = sum / listValue.Count;
//frmMain.DisplayLog(string.Format("获取C/N0值：{0}\r\n", argVale));
//if (argVale < StandardCN01)
//{
// frmMain.DisplayLog(string.Format("C/N0值：{0},小于设定范围{1} FAIL\r\n", argVale, StandardCN01));
// break;
//}
//frmMain.DisplayLog(string.Format("C/N0值：{0}，大于设定范围{1} PASS\r\n", argVale,StandardCN01));
//ret = 0;
////从芯片获取eid
////eidRead = "081603FFFFF35293" + eidlast.ToString("X").PadLeft(4,'0');
//eidRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.EidRead);
//pattern = @"[0-9A-Z]{20}";
//if (string.IsNullOrEmpty(eidRead) || !Regex.IsMatch(eidRead, pattern))
//{
// frmMain.DisplayLog("EID读取失败\r\n");
// break;
//}
//frmMain.DisplayLog(string.Format("已获取模块EID：{0}\r\n", eidRead));
//frmMain.SetText(AllForms.EnumControlWidget.txtEid.ToString(), eidRead, false);
} while (false);
ProductionInfo.SystemType systemType = ProductionInfo.Type;
//使用do..while(false)的原因，是为了当测试流程为fail时，使用break跳出该结构，仍然执行结果上报
return(ret);
}