public bool projectBackward(IFeatureClass pInputFeatureClass, IRasterLayer pDemLayer, string szXmlFilename,
ref IFeatureClass pOutputPolylineFeatureClass, ref IFeatureClass pOutputPointFeatureClass)
{
if (pInputFeatureClass == null || pDemLayer == null || string.IsNullOrEmpty(szXmlFilename) || pOutputPointFeatureClass == null || pOutputPolylineFeatureClass == null)
{
return(false);
}
#region 读取DEM文件
IRasterLayer pRasterLayer = pDemLayer;// new RasterLayerClass();
//pRasterLayer.CreateFromFilePath(szDemFilename);
IRaster pDemRaster = pRasterLayer.Raster;
IRasterProps pDemRasterProps = pDemRaster as IRasterProps;
#endregion
#region 读取相机姿态参数
ClsCameraPara cameraPara = ParseXmlFileToGetPara(szXmlFilename);
if (cameraPara == null)
{
return(false);
}
//根据姿态参数获得旋转矩阵
OriAngle oriAngle = new OriAngle();
Matrix pRotateMatrix = new Matrix(3, 3);
oriAngle.kap = cameraPara.dKappa;
oriAngle.omg = cameraPara.dOmg;
oriAngle.phi = cameraPara.dPhi;
if (!ClsGetCameraView.OPK2RMat(oriAngle, ref pRotateMatrix))
{
return(false);
}
#endregion
#region 得到曲线信息
List <ISegmentCollection> pSegmentCollection = new List <ISegmentCollection>();
List <IFeature> pFeatureList = new List <IFeature>();
IFeatureCursor pFCursor = pInputFeatureClass.Search(null, false);
IFeature pFeature = null;// pFCursor.NextFeature();
while ((pFeature = pFCursor.NextFeature()) != null)
{
IPolyline pPolyline = pFeature.Shape as IPolyline;
if (pPolyline == null)
{
//pFeature = pFCursor.NextFeature();
continue;
}
IFeature pTmpFeature = pFeature;
pFeatureList.Add(pTmpFeature);
ISegmentCollection pCurrentSegmentCollection = pPolyline as ISegmentCollection;
pSegmentCollection.Add(pCurrentSegmentCollection);
}
#endregion
#region 节点位置反投影
List <List <Pt2d> > ptImageFeaturePoints = new List <List <Pt2d> >();
List <List <Pt2d> > ptImageFeaturePointsForPointShp = new List <List <Pt2d> >();
ClsGetCameraView pGetCameraView = new ClsGetCameraView();
for (int i = 0; i < pSegmentCollection.Count; i++)
{
List <Pt2d> ptSingleImageFeaturePoints = new List <Pt2d>();
List <Pt2d> ptSingleImageFeaturePointsForPointShp = new List <Pt2d>();
for (int j = 0; j < pSegmentCollection[i].SegmentCount; j++)
{
ISegment pCurrentSegment = pSegmentCollection[i].get_Segment(j);
if (pCurrentSegment == null)
{
continue;
}
//直线
if (pCurrentSegment.GeometryType == esriGeometryType.esriGeometryLine)
{
ILine pLine = pCurrentSegment as ILine;
//起始点
IPoint ptFrom = pLine.FromPoint;
Pt2d ptFrom2d = getProjectBackwardPoint(ptFrom, pDemRaster, pGetCameraView, pRotateMatrix, cameraPara);
if (ptFrom2d != null)
{
ptSingleImageFeaturePoints.Add(ptFrom2d);
ptSingleImageFeaturePointsForPointShp.Add(ptFrom2d);
}
//终止点
IPoint ptTo = pLine.ToPoint;
Pt2d ptTo2d = getProjectBackwardPoint(ptTo, pDemRaster, pGetCameraView, pRotateMatrix, cameraPara);
if (ptTo2d != null)
{
if (j == pSegmentCollection[i].SegmentCount - 1) //最后一条直线段
{
ptSingleImageFeaturePointsForPointShp.Add(ptTo2d);
ptSingleImageFeaturePoints.Add(ptTo2d);
}
}
}
else if (pCurrentSegment.GeometryType == esriGeometryType.esriGeometryCircularArc) //圆弧
{
ICircularArc pCircularArc = pCurrentSegment as ICircularArc;
double dbCurveLength = pCircularArc.Length;
int nCount = 15;
double dbOffset = dbCurveLength / nCount;
for (int nCurrent = 0; nCurrent <= nCount; nCurrent++)
{
IPoint ptCurrent = new Point();
pCircularArc.QueryPoint(esriSegmentExtension.esriNoExtension, nCurrent * dbOffset, false, ptCurrent);
Pt2d ptCurrentImagePoint = getProjectBackwardPoint(ptCurrent, pDemRaster, pGetCameraView, pRotateMatrix, cameraPara);
if (ptCurrentImagePoint != null)
{
ptSingleImageFeaturePoints.Add(ptCurrentImagePoint);
//只保留端点的信息，用于创建点SHP图层
if (nCurrent == 0 || nCurrent == nCount)
{
ptSingleImageFeaturePointsForPointShp.Add(ptCurrentImagePoint);
}
}
}
}
else
{
continue;
}
}
ptImageFeaturePoints.Add(ptSingleImageFeaturePoints);
ptImageFeaturePointsForPointShp.Add(ptSingleImageFeaturePointsForPointShp);
}
#endregion
#region 把节点位置信息写入
IDataset dataset = (IDataset)pOutputPolylineFeatureClass;
IWorkspace workspace = dataset.Workspace;
//Cast for an IWorkspaceEdit
IWorkspaceEdit workspaceEdit = workspace as IWorkspaceEdit;
workspaceEdit.StartEditing(true);
workspaceEdit.StartEditOperation();
//////////////////////////////////////////////////////////////////////////
//整条路线的添加
IFeatureCursor pOutFCursor = null;
for (int i = 0; i < ptImageFeaturePoints.Count; i++)
{
int nPtsCount = ptImageFeaturePoints[i].Count;
IFeatureBuffer pFeatureBuffer = pOutputPolylineFeatureClass.CreateFeatureBuffer();
pOutFCursor = pOutputPolylineFeatureClass.Insert(true);
IPolyline pPolyline = new PolylineClass();
IPointCollection pPointCollection = pPolyline as IPointCollection;
for (int j = 0; j < nPtsCount; j++)
{
IPoint pt = new PointClass();
pt.PutCoords(ptImageFeaturePoints[i][j].X, ptImageFeaturePoints[i][j].Y);
pPointCollection.AddPoint(pt);
}
if (!ClsGDBDataCommon.CopyFeatureFieldValue(pFeatureList[i], pFeatureBuffer as IFeature))
{
continue;
}
pFeatureBuffer.Shape = pPolyline as IGeometry;
object featureOID = pOutFCursor.InsertFeature(pFeatureBuffer);
}
if (pOutFCursor != null)
{
pOutFCursor.Flush();
}
//分段路线的添加
for (int i = 0; i < ptImageFeaturePoints.Count; i++)
{
int nPtsCount = ptImageFeaturePoints[i].Count;
for (int j = 0; j < nPtsCount - 1; j++)
{
IFeatureBuffer pFeatureBuffer = pOutputPolylineFeatureClass.CreateFeatureBuffer();
pOutFCursor = pOutputPolylineFeatureClass.Insert(true);
IPolyline pPolyline = new PolylineClass();
IPointCollection pPointCollection = pPolyline as IPointCollection;
IPoint pt = new PointClass();
pt.PutCoords(ptImageFeaturePoints[i][j].X, ptImageFeaturePoints[i][j].Y);
pPointCollection.AddPoint(pt);
pt.PutCoords(ptImageFeaturePoints[i][j + 1].X, ptImageFeaturePoints[i][j + 1].Y);
pPointCollection.AddPoint(pt);
if (!ClsGDBDataCommon.CopyFeatureFieldValue(pFeatureList[i], pFeatureBuffer as IFeature))
{
continue;
}
pFeatureBuffer.Shape = pPolyline as IGeometry;
object featureOID = pOutFCursor.InsertFeature(pFeatureBuffer);
}
}
if (pOutFCursor != null)
{
pOutFCursor.Flush();
}
//featureCursor.Flush();
workspaceEdit.StopEditOperation();
workspaceEdit.StopEditing(true);
#endregion
#region 点SHP文件的添加
IDataset pPointDataset = (IDataset)pOutputPointFeatureClass;
IWorkspace pPointWorkspace = pPointDataset.Workspace;
//Cast for an IWorkspaceEdit
IWorkspaceEdit pPointWorkspaceEdit = pPointWorkspace as IWorkspaceEdit;
pPointWorkspaceEdit.StartEditing(true);
pPointWorkspaceEdit.StartEditOperation();
IFeatureCursor pOutPointFCursor = null;
for (int i = 0; i < ptImageFeaturePointsForPointShp.Count; i++)
{
//int nSegmentCount = pSegmentCollection[i].SegmentCount;
//IMultipoint pMultiPoint = new MultipointClass();
for (int j = 0; j < ptImageFeaturePointsForPointShp[i].Count; j++)
{
IFeatureBuffer pFeatureBuffer = pOutputPointFeatureClass.CreateFeatureBuffer();
pOutPointFCursor = pOutputPointFeatureClass.Insert(true);
IPoint pt = new PointClass();
Pt2d pt2d = ptImageFeaturePointsForPointShp[i][j];
pt.PutCoords(pt2d.X, pt2d.Y);
//CopyFeatureField(pFeatureList[i], pFeatureBuffer);
pFeatureBuffer.Shape = pt as IGeometry;
object featureOID = pOutPointFCursor.InsertFeature(pFeatureBuffer);
}
}
if (pOutPointFCursor != null)
{
pOutPointFCursor.Flush();
}
//featureCursor.Flush();
pPointWorkspaceEdit.StopEditOperation();
pPointWorkspaceEdit.StopEditing(true);
#endregion
return(true);
}
//}
/// <summary>
/// 矢量转换函数
/// </summary>
private void exprotMatrix()
{
ClsGDBDataCommon comm = new ClsGDBDataCommon();
if (!textOutData.Text.EndsWith("shp"))
{
//timerShow.Start();
MessageBox.Show("输出文件名不是shp文件!");
return;
}
object featureOID;
String strFullName = textOutData.Text;
string strPath = System.IO.Path.GetDirectoryName(strFullName);
string strName = System.IO.Path.GetFileName(strFullName);
ILayer player = null;
for (int i = 0; i < pMapControl.Map.LayerCount; i++)
{
if (pMapControl.Map.Layer[i].Name == cmbLayer.Text)
{
player = pMapControl.Map.Layer[i];
break;
}
}
IFeatureLayer pFlayer = player as IFeatureLayer;
IFeatureClass pFclass = pFlayer.FeatureClass;
IFields pFields = pFclass.Fields;
//设置空间参考
ISpatialReference pSpatialRef;
IGeoDataset pGeo = (IGeoDataset)pFlayer;
pSpatialRef = pGeo.SpatialReference;
IFeatureClass pFtClassNew = comm.CreateShapefile(strPath, strName, pFields, pSpatialRef);
//for (int i = 0; i < pFtClassNew.Fields.FieldCount;i++ )
//{
// if (pFtClassNew.Fields.get_Field(i).Type != esriFieldType.esriFieldTypeGeometry &&
// pFtClassNew.Fields.get_Field(i).Type != esriFieldType.esriFieldTypeOID)
// {
// pFtClassNew.Fields.get_Field(i).IsNullable = true;
// }
//}
IFeatureCursor pFC = pFlayer.FeatureClass.Search(null, false);
IFeature pF = pFC.NextFeature();
while (pF != null)
{
if (pFclass.ShapeType == esriGeometryType.esriGeometryMultipoint || pFclass.ShapeType == esriGeometryType.esriGeometryPoint)
{
double[] oldarray = new double[3];
double[] newarray = new double[3];
Matrix matrix = new Matrix();
IPoint pPointOld = pF.Shape as IPoint;
IPoint pPointNew = new PointClass();
oldarray[0] = pPointOld.X;
oldarray[1] = pPointOld.Y;
if (pPointOld.Z.ToString() == "NaN" || pPointOld.Z.ToString() == "非数字")
{
oldarray[2] = 0;//pPointOld.Z;
}
else
{
oldarray[2] = pPointOld.Z;
}
matrix.coord_Trans(oldarray, rotateMat, tranVec, newarray);
pPointNew.X = newarray[0];
pPointNew.Y = newarray[1];
if (pPointOld.Z.ToString() == "NaN" || pPointOld.Z.ToString() == "非数字")
{
pPointNew.Z = 0;
}
else
{
pPointNew.Z = newarray[2];
}
IFeature pFeatureTemp = pFtClassNew.CreateFeature();
pFeatureTemp.Shape = pPointNew as IGeometry;
ClsGDBDataCommon.CopyFeatureFieldValue(pF, pFeatureTemp);
pFeatureTemp.Store();
}
else if (pFclass.ShapeType == esriGeometryType.esriGeometryLine || pFclass.ShapeType == esriGeometryType.esriGeometryPolyline)
{
double[] oldarrayS = new double[3];
double[] oldarrayT = new double[3];
double[] newarrayS = new double[3];
double[] newarrayT = new double[3];
Matrix matrix = new Matrix();
ISegmentCollection pSegCOld = pF.Shape as ISegmentCollection;
ISegmentCollection pSegCNew = new PolylineClass();
// ISegment pSegmentNEW = new LineClass();
//ILine pLine = new LineClass();
IPoint pPointF = new PointClass();
IPoint pPointT = new PointClass();
for (int i = 0; i < pSegCOld.SegmentCount; i++)
{
ISegment pSegmentNEW = new LineClass();
ISegment pseg = pSegCOld.Segment[i];
oldarrayS[0] = pseg.FromPoint.X;
oldarrayS[1] = pseg.FromPoint.Y;
if (pseg.FromPoint.Z.ToString() == "NaN" || pseg.FromPoint.Z.ToString() == "非数字")
{
oldarrayS[2] = 0;
}
else
{
oldarrayS[2] = pseg.FromPoint.Z;
}
matrix.coord_Trans(oldarrayS, rotateMat, tranVec, newarrayS);
pPointF.X = newarrayS[0];
pPointF.Y = newarrayS[1];
if (pseg.FromPoint.Z.ToString() == "NaN" || pseg.FromPoint.Z.ToString() == "非数字")
{
pPointF.Z = 0;
}
else
{
pPointF.Z = newarrayS[2];
}
pSegmentNEW.FromPoint = pPointF;
oldarrayT[0] = pseg.ToPoint.X;
oldarrayT[1] = pseg.ToPoint.Y;
if (pseg.ToPoint.Z.ToString() == "NaN" || pseg.ToPoint.Z.ToString() == "非数字")
{
oldarrayT[2] = 0;
}
else
{
oldarrayT[2] = pseg.ToPoint.Z;
}
matrix.coord_Trans(oldarrayT, rotateMat, tranVec, newarrayT);
pPointT.X = newarrayT[0];
pPointT.Y = newarrayT[1];
if (pseg.ToPoint.Z.ToString() == "NaN" || pseg.ToPoint.Z.ToString() == "非数字")
{
pPointT.Z = 0;
}
else
{
pPointT.Z = newarrayT[2];
}
pSegmentNEW.ToPoint = pPointT;
pSegCNew.AddSegment(pSegmentNEW);
}
IFeature pFeatureTemp = pFtClassNew.CreateFeature();
pFeatureTemp.Shape = pSegCNew as IGeometry;
ClsGDBDataCommon.CopyFeatureFieldValue(pF, pFeatureTemp);
pFeatureTemp.Store();
}
else if (pFclass.ShapeType == esriGeometryType.esriGeometryPolygon)
{
double[] oldarrayS = new double[3];
double[] oldarrayT = new double[3];
double[] newarrayS = new double[3];
double[] newarrayT = new double[3];
Matrix matrix = new Matrix();
IGeometryCollection pGCollectionOld = pF.Shape as IGeometryCollection;
IGeometryCollection pGCollectionNew = new PolygonClass();
ISegmentCollection psegCOld = new RingClass();
//ILine pLine = new LineClass();
IPoint pPointF = new PointClass();
IPoint pPointT = new PointClass();
//IPointCollection pPointCOld = new PolygonClass();
//IPointCollection pPointCNew = new PolygonClass();
//pPointCOld=pF.Shape as IPointCollection;
//for (int i = 0; i < pPointCOld.PointCount;i++ )
//{
// pPointF = pPointCOld.Point[i];
// oldarrayS[0] = pPointF.X;
// oldarrayS[0] = pPointF.Y;
// if (pPointF.Z.ToString() == "NaN" || pPointF.Z.ToString() == "非数字")
// {
// oldarrayS[2] = 0;//pPointOld.Z;
// }
// else
// {
// oldarrayS[2] = pPointF.Z;
// }
// matrix.coord_Trans(oldarrayS, rotateMat, tranVec, newarrayT);
// pPointT.X = newarrayT[0];
// pPointT.Y = newarrayT[1];
// if (pPointF.Z.ToString() == "NaN" || pPointF.Z.ToString() == "非数字")
// {
// pPointT.Z = 0;
// }
// else
// {
// pPointT.Z = newarrayT[2];
// }
// pPointCNew.AddPoint(pPointT);
//}
//IPolygon pPolygon = pPointCNew as IPolygon;
//pPolygon.Close();
//IFeature pFeatureTemp = pFtClassNew.CreateFeature();
//pFeatureTemp.Shape = pPolygon as IGeometry;
//CopyFeatureField(pF, pFeatureTemp);
//pFeatureTemp.Store();
///方法一
//IPolygon pPolygon=pF.Shape as IPolygon;
//IRing pExterRingOld = new RingClass();
//IRing pExterRingNew = new RingClass();
//for (int i = 0; i<pPolygon.ExteriorRingCount;i++ )
//{
// pExterRingOld = pPolygon.FindExteriorRing(null);
//}
//方法二
for (int i = 0; i < pGCollectionOld.GeometryCount; i++)
{
psegCOld = pGCollectionOld.Geometry[i] as ISegmentCollection;
ISegmentCollection pSegCNew = new RingClass();
for (int j = 0; j < psegCOld.SegmentCount - 1; j++)
{
ISegment pSegmentNEW = new LineClass();
ISegment pseg = psegCOld.Segment[j];
oldarrayS[0] = pseg.FromPoint.X;
oldarrayS[1] = pseg.FromPoint.Y;
if (pseg.FromPoint.Z.ToString() == "NaN" || pseg.FromPoint.Z.ToString() == "非数字")
{
oldarrayS[2] = 0;
}
else
{
oldarrayS[2] = pseg.FromPoint.Z;
}
matrix.coord_Trans(oldarrayS, rotateMat, tranVec, newarrayS);
pPointF.X = newarrayS[0];
pPointF.Y = newarrayS[1];
if (pseg.FromPoint.Z.ToString() == "NaN" || pseg.FromPoint.Z.ToString() == "非数字")
{
pPointF.Z = 0;
}
else
{
pPointF.Z = newarrayS[2];
}
pSegmentNEW.FromPoint = pPointF;
oldarrayT[0] = pseg.ToPoint.X;
oldarrayT[1] = pseg.ToPoint.Y;
if (pseg.ToPoint.Z.ToString() == "NaN" || pseg.ToPoint.Z.ToString() == "非数字")
{
oldarrayT[2] = 0;
}
else
{
oldarrayT[2] = pseg.ToPoint.Z;
}
matrix.coord_Trans(oldarrayT, rotateMat, tranVec, newarrayT);
pPointT.X = newarrayT[0];
pPointT.Y = newarrayT[1];
if (pseg.ToPoint.Z.ToString() == "NaN" || pseg.ToPoint.Z.ToString() == "非数字")
{
pPointT.Z = 0;
}
else
{
pPointT.Z = newarrayT[2];
}
pSegmentNEW.ToPoint = pPointT;
pSegCNew.AddSegment(pSegmentNEW);
}
IRing pRing = pSegCNew as IRing;
pRing.Close();
object ob = Type.Missing;
pGCollectionNew.AddGeometry(pRing as IGeometry, ref ob, ref ob);
}
IFeature pFeatureTemp = pFtClassNew.CreateFeature();
pFeatureTemp.Shape = pGCollectionNew as IGeometry;
ClsGDBDataCommon.CopyFeatureFieldValue(pF, pFeatureTemp);
pFeatureTemp.Store();
}
pF = pFC.NextFeature();
}
IFeatureLayer ppFeatureLayer = new FeatureLayerClass();
ppFeatureLayer.FeatureClass = pFtClassNew;
ppFeatureLayer.Name = strName;
pMapControl.AddLayer(ppFeatureLayer as ILayer);
//pMapControl.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGeography, null, null);
this.Close();
}
public bool projectBackward(string szInputShpFilename, IRasterLayer pDemLayer, string szXmlFilename, string szOutShpFilename)
{
if (string.IsNullOrEmpty(szInputShpFilename) || pDemLayer == null || string.IsNullOrEmpty(szXmlFilename) || string.IsNullOrEmpty(szOutShpFilename))
{
return(false);
}
ClsGDBDataCommon processDataCommon = new ClsGDBDataCommon();
string strInputPath = System.IO.Path.GetDirectoryName(szInputShpFilename);
string strInputName = System.IO.Path.GetFileName(szInputShpFilename);
#region 读取SHP文件
IWorkspace pWorkspace = processDataCommon.OpenFromShapefile(strInputPath);
IFeatureWorkspace pFeatureWorkspace = pWorkspace as IFeatureWorkspace;
IFeatureClass pInputFC = pFeatureWorkspace.OpenFeatureClass(strInputName);
#endregion
#region 读取DEM文件
IRasterLayer pRasterLayer = pDemLayer;// new RasterLayerClass();
//pRasterLayer.CreateFromFilePath(szDemFilename);
IRaster pDemRaster = pRasterLayer.Raster;
IRasterProps pDemRasterProps = pDemRaster as IRasterProps;
#endregion
#region 得到曲线信息
List <ISegmentCollection> pSegmentCollection = new List <ISegmentCollection>();
List <IFeature> pFeatureList = new List <IFeature>();
IFeatureCursor pFCursor = pInputFC.Search(null, false);
IFeature pFeature = null;// pFCursor.NextFeature();
while ((pFeature = pFCursor.NextFeature()) != null)
{
IPolyline pPolyline = pFeature.Shape as IPolyline;
if (pPolyline == null)
{
//pFeature = pFCursor.NextFeature();
continue;
}
IFeature pTmpFeature = pFeature;
pFeatureList.Add(pTmpFeature);
ISegmentCollection pCurrentSegmentCollection = pPolyline as ISegmentCollection;
pSegmentCollection.Add(pCurrentSegmentCollection);
}
#endregion
#region 读取相机姿态参数
ClsCameraPara cameraPara = ParseXmlFileToGetPara(szXmlFilename);
if (cameraPara == null)
{
return(false);
}
//根据姿态参数获得旋转矩阵
OriAngle oriAngle = new OriAngle();
Matrix pRotateMatrix = new Matrix(3, 3);
oriAngle.kap = cameraPara.dKappa;
oriAngle.omg = cameraPara.dOmg;
oriAngle.phi = cameraPara.dPhi;
if (!ClsGetCameraView.OPK2RMat(oriAngle, ref pRotateMatrix))
{
return(false);
}
#endregion
#region 创建输出SHP文件
string strOutputPath = System.IO.Path.GetDirectoryName(szOutShpFilename);
string strOutputName = System.IO.Path.GetFileName(szOutShpFilename);
string strPointOutputName = System.IO.Path.GetFileNameWithoutExtension(szOutShpFilename) + "_point" + System.IO.Path.GetExtension(szOutShpFilename);
//设置空间参考
ISpatialReference pSpatialRef = new UnknownCoordinateSystemClass(); //没有这一句就报错，说尝试读取或写入受保护的内存。
pSpatialRef.SetDomain(MIN_INT, MAX_INT, MIN_INT, MAX_INT); //没有这句就抛异常来自HRESULT：0x8004120E。
pSpatialRef.SetZDomain(MIN_INT, MAX_INT);
//创建POLYLINE文件的字段
IFields pFields = pInputFC.Fields;
//创建点SHP文件的字段
IFields pPointFields = new FieldsClass();
IFieldsEdit pFieldsEdit = (IFieldsEdit)pPointFields;
//设置字段
IField pField = new FieldClass();
IFieldEdit pFieldEdit = (IFieldEdit)pField;
//创建类型为几何类型的字段
pFieldEdit.Name_2 = "shape";
pFieldEdit.Type_2 = esriFieldType.esriFieldTypeGeometry;
IGeometryDef pGeoDef = new GeometryDefClass();
IGeometryDefEdit pGeoDefEdit = (IGeometryDefEdit)pGeoDef;
pGeoDefEdit.GeometryType_2 = esriGeometryType.esriGeometryPoint;
pGeoDefEdit.HasM_2 = false;
pGeoDefEdit.HasZ_2 = false;
pGeoDefEdit.SpatialReference_2 = pSpatialRef;
//pFieldEdit.Name_2 = "SHAPE";
//pFieldEdit.Type_2 = esriFieldType.esriFieldTypeGeometry;
pFieldEdit.GeometryDef_2 = pGeoDef;
pFieldEdit.IsNullable_2 = true;
pFieldEdit.Required_2 = true;
pFieldsEdit.AddField(pField);
IFeatureClass pOutputFC = processDataCommon.CreateShapefile(strOutputPath, strOutputName, pFields, pSpatialRef);
IFeatureClass pOutputPointFC = processDataCommon.CreateShapefile(strOutputPath, strPointOutputName, pPointFields, pSpatialRef);
if (pOutputFC == null || pOutputPointFC == null)
{
return(false);
}
#endregion
#region 节点位置反投影
List <List <Pt2d> > ptImageFeaturePoints = new List <List <Pt2d> >();
List <List <Pt2d> > ptImageFeaturePointsForPointShp = new List <List <Pt2d> >();
ClsGetCameraView pGetCameraView = new ClsGetCameraView();
for (int i = 0; i < pSegmentCollection.Count; i++)
{
List <Pt2d> ptSingleImageFeaturePoints = new List <Pt2d>();
List <Pt2d> ptSingleImageFeaturePointsForPointShp = new List <Pt2d>();
for (int j = 0; j < pSegmentCollection[i].SegmentCount; j++)
{
ISegment pCurrentSegment = pSegmentCollection[i].get_Segment(j);
if (pCurrentSegment == null)
{
continue;
}
//直线
if (pCurrentSegment.GeometryType == esriGeometryType.esriGeometryLine)
{
ILine pLine = pCurrentSegment as ILine;
//起始点
IPoint ptFrom = pLine.FromPoint;
Pt2d ptFrom2d = getProjectBackwardPoint(ptFrom, pDemRaster, pGetCameraView, pRotateMatrix, cameraPara);
if (ptFrom2d != null)
{
ptSingleImageFeaturePoints.Add(ptFrom2d);
ptSingleImageFeaturePointsForPointShp.Add(ptFrom2d);
}
//终止点
IPoint ptTo = pLine.ToPoint;
Pt2d ptTo2d = getProjectBackwardPoint(ptTo, pDemRaster, pGetCameraView, pRotateMatrix, cameraPara);
if (ptTo2d != null)
{
ptSingleImageFeaturePoints.Add(ptTo2d);
if (j == pSegmentCollection[i].SegmentCount - 1) //最后一条直线段
{
ptSingleImageFeaturePointsForPointShp.Add(ptTo2d);
}
}
}
else if (pCurrentSegment.GeometryType == esriGeometryType.esriGeometryCircularArc) //圆弧
{
ICircularArc pCircularArc = pCurrentSegment as ICircularArc;
double dbCurveLength = pCircularArc.Length;
int nCount = 15;
double dbOffset = dbCurveLength / nCount;
for (int nCurrent = 0; nCurrent < nCount; nCurrent++)
{
IPoint ptCurrent = new Point();
pCircularArc.QueryPoint(esriSegmentExtension.esriNoExtension, nCurrent * dbOffset, false, ptCurrent);
Pt2d ptCurrentImagePoint = getProjectBackwardPoint(ptCurrent, pDemRaster, pGetCameraView, pRotateMatrix, cameraPara);
if (ptCurrentImagePoint != null)
{
ptSingleImageFeaturePoints.Add(ptCurrentImagePoint);
//只保留端点的信息，用于创建点SHP图层
if (nCurrent == 0 || nCurrent == nCount - 1)
{
ptSingleImageFeaturePointsForPointShp.Add(ptCurrentImagePoint);
}
}
}
}
else
{
continue;
}
}
ptImageFeaturePoints.Add(ptSingleImageFeaturePoints);
ptImageFeaturePointsForPointShp.Add(ptSingleImageFeaturePointsForPointShp);
}
#endregion
#region 写入POLYLINE节点信息
IDataset dataset = (IDataset)pOutputFC;
IWorkspace workspace = dataset.Workspace;
//Cast for an IWorkspaceEdit
IWorkspaceEdit workspaceEdit = workspace as IWorkspaceEdit;
workspaceEdit.StartEditing(true);
workspaceEdit.StartEditOperation();
//////////////////////////////////////////////////////////////////////////
//整条路线的添加
IFeatureCursor pOutFCursor = null;
for (int i = 0; i < ptImageFeaturePoints.Count; i++)
{
int nPtsCount = ptImageFeaturePoints[i].Count;
IFeatureBuffer pFeatureBuffer = pOutputFC.CreateFeatureBuffer();
pOutFCursor = pOutputFC.Insert(true);
IPolyline pPolyline = new PolylineClass();
IPointCollection pPointCollection = pPolyline as IPointCollection;
for (int j = 0; j < nPtsCount; j++)
{
IPoint pt = new PointClass();
pt.PutCoords(ptImageFeaturePoints[i][j].X, ptImageFeaturePoints[i][j].Y);
pPointCollection.AddPoint(pt);
}
if (!ClsGDBDataCommon.CopyFeatureFieldValue(pFeatureList[i], pFeatureBuffer as IFeature))
{
continue;
}
pFeatureBuffer.Shape = pPolyline as IGeometry;
object featureOID = pOutFCursor.InsertFeature(pFeatureBuffer);
}
pOutFCursor.Flush();
//分段路线的添加
for (int i = 0; i < ptImageFeaturePoints.Count; i++)
{
int nPtsCount = ptImageFeaturePoints[i].Count;
for (int j = 0; j < nPtsCount - 1; j++)
{
IFeatureBuffer pFeatureBuffer = pOutputFC.CreateFeatureBuffer();
pOutFCursor = pOutputFC.Insert(true);
IPolyline pPolyline = new PolylineClass();
IPointCollection pPointCollection = pPolyline as IPointCollection;
IPoint pt = new PointClass();
pt.PutCoords(ptImageFeaturePoints[i][j].X, ptImageFeaturePoints[i][j].Y);
pPointCollection.AddPoint(pt);
pt.PutCoords(ptImageFeaturePoints[i][j + 1].X, ptImageFeaturePoints[i][j + 1].Y);
pPointCollection.AddPoint(pt);
if (!ClsGDBDataCommon.CopyFeatureFieldValue(pFeatureList[i], pFeatureBuffer as IFeature))
{
continue;
}
pFeatureBuffer.Shape = pPolyline as IGeometry;
object featureOID = pOutFCursor.InsertFeature(pFeatureBuffer);
}
}
pOutFCursor.Flush();
//featureCursor.Flush();
workspaceEdit.StopEditOperation();
workspaceEdit.StopEditing(true);
#endregion
#region 点SHP文件的添加
IDataset pPointDataset = (IDataset)pOutputPointFC;
IWorkspace pPointWorkspace = pPointDataset.Workspace;
//Cast for an IWorkspaceEdit
IWorkspaceEdit pPointWorkspaceEdit = pPointWorkspace as IWorkspaceEdit;
pPointWorkspaceEdit.StartEditing(true);
pPointWorkspaceEdit.StartEditOperation();
IFeatureCursor pOutPointFCursor = null;
for (int i = 0; i < ptImageFeaturePointsForPointShp.Count; i++)
{
//int nSegmentCount = pSegmentCollection[i].SegmentCount;
//IMultipoint pMultiPoint = new MultipointClass();
for (int j = 0; j < ptImageFeaturePointsForPointShp[i].Count; j++)
{
IFeatureBuffer pFeatureBuffer = pOutputPointFC.CreateFeatureBuffer();
pOutPointFCursor = pOutputPointFC.Insert(true);
IPoint pt = new PointClass();
Pt2d pt2d = ptImageFeaturePointsForPointShp[i][j];
pt.PutCoords(pt2d.X, pt2d.Y);
//CopyFeatureField(pFeatureList[i], pFeatureBuffer);
pFeatureBuffer.Shape = pt as IGeometry;
object featureOID = pOutPointFCursor.InsertFeature(pFeatureBuffer);
}
}
pOutPointFCursor.Flush();
//featureCursor.Flush();
pPointWorkspaceEdit.StopEditOperation();
pPointWorkspaceEdit.StopEditing(true);
#endregion
return(true);
}
