public void CreateSingleSurface()
{
try
{
Dictionary <ObjectId, ObjectIdCollection> m_dict;
var surfaceManager = new PasteSurfaces();
m_dict = new Dictionary <ObjectId, ObjectIdCollection>();
#region Steps
//1 Create Overall Surface
//2 Create new Surface with Defaults
//3 Open new Surface to Paste Overall Surface
//4 Select Surface to Paste Overall Surface Into
//5 Add Boundary to New Surface
//1 Select All Polylines
//2 Determine if boundaries are needed to be type inner or outer
//3 Filter Polylines based on layer name. May be able to know the type.
#endregion
if (CivilTinSurface.FindCivilTinSurface("All"))
{
#region Insert Point Cloud into Overall Surface
///TODO///
#endregion
#region get polylines and generate surfaces and boundaries
//Get Selected Polylines
Editor ed = Active.Editor;
try
{
PromptSelectionResult selectionRes =
ed.SelectImplied();
// If there's no pickfirst set available...
if (selectionRes.Status == PromptStatus.Error)
{
// ... ask the user to select entities
PromptSelectionOptions selectionOpts =
new PromptSelectionOptions();
selectionOpts.MessageForAdding =
"\nSelect polylines to create a surface: ";
selectionRes =
ed.GetSelection(selectionOpts);
}
else
{
// If there was a pickfirst set, clear it
ed.SetImpliedSelection(new ObjectId[0]);
}
// If the user has not cancelled...
if (selectionRes.Status == PromptStatus.OK)
{
var selectedObjects = selectionRes.Value.GetObjectIds();
var selectedpolyline = new ObjectIdCollection(selectedObjects);
var polylines = surfaceManager.GetIdsByTypeCollection();
if (!surfaceManager.CreateSurfaceForPolylines(selectedpolyline))
{
throw new SystemException("Create surface for polylines failed!");
}
if (!surfaceManager.PasteAllSurfaces(CivilTinSurface.GetCivilSurfaceBySurfaceName("All")))
{
throw new SystemException("Pasting Surfaces failed!");
}
if (!surfaceManager.AddBoundariesForSurfaces(selectedpolyline))
{
throw new SystemException("Add overall Boundaries for surfaces failed!");
}
#endregion
ObjectIdCollection internalPLines = null;
foreach (ObjectId selected in selectedpolyline)
{
//Create a surface hive to generate a TIN surface
//Disabled min poly separation distance in backend 2/3/2018
#region store the internal boundaries for the selected base object in dict
if (GetPolyFromObjId(selected) == null)
{
continue;
}
internalPLines = surfaceManager.GetAllInternalPolyLinesToSelected(selected, polylines);
m_dict.Add(selected, internalPLines);
#endregion
}
#region Iterate through inner boundaries
CivilTinSurface lsurface = null;
foreach (KeyValuePair <ObjectId, ObjectIdCollection> boundary in m_dict)
{
#region Removed
//#region Create Surface for that Base Polyline and Add outer boundary
//if ((lsurface = (surfaceManager.CreateSelectedSurface(baseObj))) == null)
// throw new Exception("CreateSelectedSurface Failed!");
//lsurface.AddStandardBoundary(baseObj, "OuterBoundary");
//#endregion
#endregion
lsurface = PasteSurfaces.FindSurfaceIdForPolylineV2(boundary.Key);
if (boundary.Value == null)
{
continue;
}
#region Interate Internal Polylines to add breaklines and boundaries
if (boundary.Value != null)
{
foreach (ObjectId innnerId in boundary.Value)
{
try
{
#region Breaklines Deprecated
//Breaklines removed due to overlapping
//lsurface.AddStandardBreakline
// (PasteSurfaces.GetPolyPointsByObjectId(pLines), "Breakline-");
#endregion
var currentPoly = GetPolyFromObjId(innnerId);
var selectedPoly = GetPolyFromObjId(boundary.Key);
if (currentPoly != null && currentPoly.Layer == selectedPoly.Layer)
{
if (lsurface != null)
{
lsurface.AddStandardInnerBoundary(innnerId, "Boundary-" + currentPoly.Layer);
}
}
}
catch (NullReferenceException e)
{
PGA.MessengerManager.MessengerManager.AddLog(
"AddAsInnerBoundary Failed: " +
e.Message);
}
catch (Exception e)
{
PGA.MessengerManager.MessengerManager.AddLog(
"AddAsInnerBoundary Failed: " +
e.Message);
}
}
}
internalPLines = null;
#endregion
}
#region Rebuild Surfaces
if (lsurface != null)
{
CivilTinSurface.RebuildSurfaceBySurfaceName(lsurface.Name);
}
#endregion
ed.Regen();
#endregion
internalPLines = null;
}
}
catch (System.Exception ex)
{
PGA.MessengerManager.MessengerManager.LogException(ex);
return;
}
}
else
{
throw new FileNotFoundException(
"Did not find the surface ALL!");
}
EditorUtils.Write("Create Surfaces Complete!");
}
catch (NullReferenceException e)
{
Console.WriteLine(e.StackTrace);
PGA.MessengerManager.MessengerManager.LogException(e);
}
catch (global::Autodesk.AutoCAD.Runtime.Exception e)
{
PGA.MessengerManager.MessengerManager.LogException(e);
}
catch (Exception e)
{
PGA.MessengerManager.MessengerManager.LogException(e);
}
}
public void RebuildAllSurfaces()
{
try
{
var polylines =
new ObjectIdCollection();
Dictionary <ObjectId, ObjectIdCollection> m_dict;
var surfaceManager = new PasteSurfaces();
m_dict = new Dictionary <ObjectId, ObjectIdCollection>();
if (CivilTinSurface.FindCivilTinSurface("All"))
{
#region get polylines and generate surfaces and boundaries
polylines = surfaceManager.GetAllPolyLines();
#endregion
ObjectIdCollection internalPLines = null;
foreach (ObjectId baseObj in polylines)
{
#region store the internal boundaries for the selected base object in dict
if (GetPolyFromObjId(baseObj) == null)
{
continue;
}
internalPLines = surfaceManager.GetAllInternalPolyLinesToSelected(baseObj, polylines);
m_dict.Add(baseObj, internalPLines);
#endregion
}
#region Iterate through inner boundaries
CivilTinSurface lsurface = null;
foreach (KeyValuePair <ObjectId, ObjectIdCollection> innerbdy in m_dict)
{
#region Removed
//#region Create Surface for that Base Polyline and Add outer boundary
//if ((lsurface = (surfaceManager.CreateSelectedSurface(baseObj))) == null)
// throw new Exception("CreateSelectedSurface Failed!");
//lsurface.AddStandardBoundary(baseObj, "OuterBoundary");
//#endregion
#endregion
if (innerbdy.Value == null)
{
continue;
}
ObjectId outerPline = innerbdy.Key;
ObjectIdCollection innerIdCollection = innerbdy.Value;
lsurface = PasteSurfaces.FindSurfaceIdForPolylineV2(outerPline);
if (lsurface == null)
{
continue;
}
#region Interate Internal Polylines to add breaklines and boundaries
if (innerIdCollection != null)
{
foreach (ObjectId pLines in innerIdCollection)
{
try
{
#region Breaklines Deprecated
//Breaklines removed due to overlapping
//lsurface.AddStandardBreakline
// (PasteSurfaces.GetPolyPointsByObjectId(pLines), "Breakline-");
#endregion
var layer = PGA.SurfaceManager.SurfaceManager.GetPolylineLayer(pLines);
lsurface.AddStandardInnerBoundary(pLines, "Boundary-" + layer);
}
catch (NullReferenceException e)
{
PGA.MessengerManager.MessengerManager.AddLog("AddAsInnerBoundary Failed: " + e.Message);
//throw new Exception(e.Message);
}
internalPLines = null;
}
}
#endregion
#region Rebuild Surfaces
if (lsurface != null)
{
CivilTinSurface.RebuildSurfaceBySurfaceName(lsurface.Name);
}
#endregion
#region Regenerate Graphics
EditorUtils.Regen();
#endregion
}
#endregion
internalPLines = null;
}
else
{
throw new FileNotFoundException(
"Did not find the surface ALL!");
}
EditorUtils.Write("\nRebuild Surfaces Complete!\n");
}
catch (NullReferenceException e)
{
EditorUtils.Write(e.StackTrace);
PGA.MessengerManager.MessengerManager.LogException(e);
}
catch (global::Autodesk.AutoCAD.Runtime.Exception e)
{
PGA.MessengerManager.MessengerManager.LogException(e);
}
catch (Exception e)
{
PGA.MessengerManager.MessengerManager.LogException(e);
}
}
public void CreateAllSurfaces()
{
try
{
var polylines = new ObjectIdCollection();
var surfaceManager = new PasteSurfaces();
var m_dict = new Dictionary <ObjectId, ObjectIdCollection>();
#region Steps
//1 Create Overall Surface
//2 Create new Surface with Defaults
//3 Open new Surface to Paste Overall Surface
//4 Select Surface to Paste Overall Surface Into
//5 Add Boundary to New Surface
//1 Select All Polylines
//2 Determine if boundaries are needed to be type inner or outer
//3 Filter Polylines based on layer name. May be able to know the type.
#endregion
if (CivilTinSurface.FindCivilTinSurface("All"))
{
#region Insert Point Cloud into Overall Surface
#endregion
#region get polylines and generate surfaces and boundaries
//polylines = surfaceManager.GetAllPolyLines();
polylines = GetIdsByTypeTypeValue("POLYLINE", "LWPOLYLINE", "POLYLINE2D", "POLYLINE3D");
//polylines = surfaceManager.GetIdsByTypeCollection();
//Create a surface hive to generate a TIN surface
if (!surfaceManager.CreateSurfaceForPolylines(polylines))
{
throw new SystemException("Create surface for polylines failed!");
}
if (!surfaceManager.PasteAllSurfaces(CivilTinSurface.GetCivilSurfaceBySurfaceName("All")))
{
throw new SystemException("Pasting Surfaces failed!");
}
if (!surfaceManager.AddBoundariesForSurfaces(polylines))
{
throw new SystemException("Add overall Boundaries for surfaces failed!");
}
#endregion
PGA.MessengerManager.MessengerManager.AddLog
("Store boundaries to Object Dictionary");
ObjectIdCollection internalPLines = null;
foreach (ObjectId baseObj in polylines)
{
#region store the internal boundaries for the selected base object in dict
if (GetPolyFromObjId(baseObj) == null)
{
continue;
}
if (IsTINExcluded(baseObj))
{
continue;
}
internalPLines = surfaceManager.GetAllInternalPolyLinesToSelected(baseObj, polylines);
m_dict.Add(baseObj, internalPLines);
#endregion
}
#region Iterate through inner boundaries
PGA.MessengerManager.MessengerManager.AddLog("Start Iterate through inner boundaries");
CivilTinSurface lsurface = null;
foreach (KeyValuePair <ObjectId, ObjectIdCollection> innerbdy in m_dict)
{
if (innerbdy.Value == null)
{
continue;
}
ObjectId outerPline = innerbdy.Key;
ObjectIdCollection innerIdCollection = innerbdy.Value;
lsurface = PasteSurfaces.FindSurfaceIdForPolylineV2(outerPline);
if (lsurface == null)
{
continue;
}
lsurface.SetDefaultBuildOptions();
#region Interate Internal Polylines to add breaklines and boundaries
PGA.MessengerManager.MessengerManager.AddLog("Start AddStandardInnerBoundary");
if (innerIdCollection != null)
{
foreach (ObjectId pLines in innerIdCollection)
{
if (pLines == null)
{
continue;
}
try
{
var layer = PGA.SurfaceManager.SurfaceManager.GetPolylineLayer(pLines);
lsurface.AddStandardInnerBoundary(pLines, "Boundary-" + layer + DateTime.Now.Millisecond);
}
catch (NullReferenceException e)
{
PGA.MessengerManager.MessengerManager.AddLog("AddAsInnerBoundary Failed: " + e.Message);
}
catch (Exception e)
{
PGA.MessengerManager.MessengerManager.AddLog("AddAsInnerBoundary Failed: " + e.Message);
}
internalPLines = null;
}
}
PGA.MessengerManager.MessengerManager.AddLog("End AddStandardInnerBoundary");
#endregion
#region Rebuild Surfaces
PGA.MessengerManager.MessengerManager.AddLog("Start RebuildSurfaceBySurfaceName");
if (lsurface != null)
{
CivilTinSurface.RebuildSurfaceBySurfaceName(lsurface.Name);
}
#endregion
}
#endregion
internalPLines = null;
PGA.MessengerManager.MessengerManager.AddLog
("End Iterate through inner boundaries");
}
else
{
EditorUtils.Write("Missing 'All' Surface. Create Surfaces Incomplete!");
throw new FileNotFoundException(
"Did not find the surface ALL!");
}
EditorUtils.Write("Create Surfaces Complete!\n");
}
catch (NullReferenceException e)
{
Console.WriteLine(e.StackTrace);
PGA.MessengerManager.MessengerManager.LogException(e);
}
catch (global::Autodesk.AutoCAD.Runtime.Exception e)
{
PGA.MessengerManager.MessengerManager.LogException(e);
}
catch (Exception e)
{
PGA.MessengerManager.MessengerManager.LogException(e);
}
}
