public void Test_AddAndRemoveComponentsToCircuit()
{
Circuit circuit = new Circuit();
TrueConst true_constant = new TrueConst();
Assert.That(() => circuit.AddComponent(true_constant), Throws.Nothing);
// Check we can't add the same component twice:
Assert.That(() => circuit.AddComponent(true_constant), Throws.ArgumentException);
// Try removing:
Assert.That(() => circuit.RemoveComponent(true_constant), Throws.Nothing);
Assert.That(() => circuit.RemoveComponent(true_constant), Throws.TypeOf <KeyNotFoundException>());
// Try re-adding again:
Assert.That(() => circuit.AddComponent(true_constant), Throws.Nothing);
}
public static Circuit ACVSourceTestCircuit()
{
var testCkt = new Circuit("ACVSourceTestCircuit");
var gnd = testCkt.Ground;
var node0 = testCkt.GenNode();
testCkt.AddComponent(new Resistor("R1", 1, node0, gnd));
var vs = new VSource("vSin", 1, node0, gnd);
vs.SetSine(2, 4, 50E-3, -Math.PI / 4);
testCkt.AddComponent(vs);
return(testCkt);
}
public void Test_RemoveComponent()
{
Circuit circuit = new Circuit();
var and_gate = new AndGate();
var true_const = new TrueConst();
circuit.AddComponent(and_gate);
circuit.AddComponent(true_const);
circuit.Connect(true_const, 0, and_gate, 0);
circuit.Connect(and_gate, 0, and_gate, 1);
circuit.RemoveComponent(and_gate);
circuit.RemoveComponent(true_const);
}
public static Circuit DCTestCircuit()
{
var testCkt = new Circuit("DCTestCircuit");
var gnd = testCkt.Ground;
var node1 = testCkt.GenNode();
var node2 = testCkt.GenNode();
var node3 = testCkt.GenNode();
testCkt.AddComponent(new Resistor("R1", 2, node1, gnd));
testCkt.AddComponent(new Resistor("R2", 4, node2, node3));
testCkt.AddComponent(new Resistor("R3", 8, node2, gnd));
testCkt.AddComponent(new VSource("Vs1", 32, node2, node1));
testCkt.AddComponent(new VSource("Vs2", 20, node3, gnd));
return(testCkt);
}
public override void RefreshTile(Vector3Int location, ITilemap tilemap)
{
if (tilemap.GetTile(location))
{
OrGate gate = new OrGate(location, tilemap);
Circuit.AddComponent(location, gate);
gate.previousTile = replacedTile;
}
else
{
Circuit.RemoveComponent(location);
}
tilemap.RefreshTile(location);
if (Circuit.circuitComponents.ContainsKey(location))
{
CircuitComponent component = Circuit.circuitComponents[location];
foreach (CircuitComponent inComponent in component.ins)
{
tilemap.RefreshTile(inComponent.location);
}
foreach (CircuitComponent outComponent in component.outs)
{
tilemap.RefreshTile(outComponent.location);
}
}
}
public override void RefreshTile(Vector3Int location, ITilemap tilemap)
{
if (tilemap.GetTile(location))
{
Circuit.AddComponent(location, new Wire(location, tilemap));
}
else
{
Circuit.RemoveComponent(location);
}
tilemap.RefreshTile(location);
if (Circuit.circuitComponents.ContainsKey(location))
{
CircuitComponent component = Circuit.circuitComponents[location];
foreach (CircuitComponent inComponent in component.ins)
{
tilemap.RefreshTile(inComponent.location);
}
foreach (CircuitComponent outComponent in component.outs)
{
tilemap.RefreshTile(outComponent.location);
}
}
}
public static Circuit RLTestCircuit()
{
var testCkt = new Circuit("RLTestCircuit");
var gnd = testCkt.Ground;
var node0 = testCkt.GenNode();
var node1 = testCkt.GenNode();
testCkt.AddComponent(new Resistor("R1", 1E3, node0, node1));
testCkt.AddComponent(new Inductor("L1", 1, node1, gnd));
var vs = new VSource("vStep", 1, node0, gnd);
vs.SetStep(0, 0, 1E-9);
testCkt.AddComponent(vs);
return(testCkt);
}
public void Test_CircuitSimulate_SelfCycle()
{
LogicComponent not_gate = new NotGate();
LogicComponent connection = new Connection();
Circuit circuit = new Circuit();
/* The circuit is just a not gate whose output is connected to its own input by a wire */
circuit.AddComponent(not_gate);
circuit.AddComponent(connection);
circuit.Connect(not_gate, 0, connection, 0);
circuit.Connect(connection, 0, not_gate, 0);
/* The circuit's state should repeat every 4 simulate steps.
* The expected result of each of the 4 simulate steps in order:
* 1) The output of the not gate switches to True.
* 2) The output of the connection switches to True.
* 3) The output of the not gate switches back to False.
* 4) The output of connection switches back to False.
*/
for (int i = 0; i < 100; i++)
{
// After first step, not gate should have true output:
circuit.Simulate();
Assert.AreEqual(not_gate.Outputs, new List <bool>()
{
true
});
// After second step, connection should have true output too:
circuit.Simulate();
Assert.AreEqual(connection.Outputs, new List <bool>()
{
true
});
// After third step, not gate should have false output again:
circuit.Simulate();
Assert.AreEqual(not_gate.Outputs, new List <bool>()
{
false
});
// After fourth step, connection should have false output again:
circuit.Simulate();
Assert.AreEqual(connection.Outputs, new List <bool>()
{
false
});
}
}
public void Test_Clock()
{
// Assert that clock with zero period is invalid
Assert.That(() => new Clock(0), Throws.TypeOf <ArgumentOutOfRangeException>());
// Check outputs for different periods
for (uint i = 1; i < 100; i++)
{
Circuit circuit = new Circuit();
LogicComponent clock = new Clock(i);
circuit.AddComponent(clock);
for (uint j = 0; j < 400; j++)
{
bool expected = ((j / i) % 2 != 0);
Assert.AreEqual(clock.Outputs[0], expected);
circuit.Simulate();
}
}
}
public void Test_CircuitSimulate_SmallTree()
{
LogicComponent true_constant1 = new TrueConst();
LogicComponent true_constant2 = new TrueConst();
LogicComponent false_constant = new FalseConst();
LogicComponent and_gate = new AndGate();
LogicComponent or_gate = new OrGate();
LogicComponent true_constant1_connection = new Connection();
LogicComponent true_constant2_connection = new Connection();
LogicComponent false_constant_connection = new Connection();
LogicComponent and_gate_connection = new Connection();
Circuit circuit = new Circuit();
/* Test will be 2 TRUEs connected to an AND gate.
* This AND gate and a FALSE will then be connected to the OR gate.
*/
circuit.AddComponent(true_constant1);
circuit.AddComponent(true_constant2);
circuit.AddComponent(false_constant);
circuit.AddComponent(and_gate);
circuit.AddComponent(or_gate);
circuit.AddComponent(true_constant1_connection);
circuit.AddComponent(true_constant2_connection);
circuit.AddComponent(false_constant_connection);
circuit.AddComponent(and_gate_connection);
circuit.Connect(true_constant1, 0, true_constant1_connection, 0);
circuit.Connect(true_constant2, 0, true_constant2_connection, 0);
circuit.Connect(true_constant1_connection, 0, and_gate, 0);
circuit.Connect(true_constant2_connection, 0, and_gate, 1);
circuit.Connect(and_gate, 0, and_gate_connection, 0);
circuit.Connect(false_constant, 0, false_constant_connection, 0);
circuit.Connect(and_gate_connection, 0, or_gate, 0);
circuit.Connect(false_constant_connection, 0, or_gate, 1);
// Try first step: the output of the connections from the constants should change.
circuit.Simulate();
Assert.AreEqual(true_constant1_connection.Outputs, new List <bool>()
{
true
});
Assert.AreEqual(true_constant2_connection.Outputs, new List <bool>()
{
true
});
// Try second step: the output from the and gate should change.
circuit.Simulate();
Assert.AreEqual(and_gate.Outputs, new List <bool>()
{
true
});
// Try third step: the output of the connections from the and gate should change.
circuit.Simulate();
Assert.AreEqual(and_gate_connection.Outputs, new List <bool>()
{
true
});
// Try fourth step: the output of the or gate should change.
circuit.Simulate();
Assert.AreEqual(or_gate.Outputs, new List <bool>()
{
true
});
// Ensure the state has stabilized into the expected state:
for (int i = 0; i < 100; i++)
{
circuit.Simulate();
Assert.AreEqual(true_constant1_connection.Outputs, new List <bool>()
{
true
});
Assert.AreEqual(true_constant2_connection.Outputs, new List <bool>()
{
true
});
Assert.AreEqual(and_gate.Outputs, new List <bool>()
{
true
});
Assert.AreEqual(and_gate_connection.Outputs, new List <bool>()
{
true
});
Assert.AreEqual(or_gate.Outputs, new List <bool>()
{
true
});
}
}
public void AddCompToCurrent(Component c)
{
CurrentCircuit.AddComponent(c);
SelectedComp = c;
}