private bool InsertBalloon(int balloonNum, string diCount, Point3d BallonLocation)
{
try
{
double BallonNumSize = 0;
//決定數字的大小
if (balloonNum <= 9)
{
BallonNumSize = 2.5;
}
else if (balloonNum > 9 && balloonNum <= 99)
{
BallonNumSize = 1.5;
}
else
{
BallonNumSize = 1;
}
NXObject balloonObj = null;
CaxME.CreateBallonOnSheet(balloonNum.ToString(), BallonLocation, BallonNumSize, "BalloonAtt", out balloonObj);
//如果大於1表示要插入a.b.c.....
if (diCount != "1")
{
//文字座標
CaxME.BoxCoordinate sBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(balloonObj.Tag, out sBoxCoordinate);
Point3d textCoord = new Point3d(sBoxCoordinate.lower_left[0] + 1.5, sBoxCoordinate.lower_left[1] - 1.5, 0);
string countText = Convert.ToChar(65 + 0).ToString().ToLower() + "-" + Convert.ToChar(65 + Convert.ToInt32(diCount) - 1).ToString().ToLower();
CaxME.InsertDicountNote(balloonNum.ToString(), CaxME.DimenAttr.DiCount, countText, "1.8", textCoord);
}
}
catch (System.Exception ex)
{
return(false);
}
return(true);
}
private void OK_Click(object sender, EventArgs e)
{
//抓取目前圖紙數量和Tag
int SheetCount = 0;
NXOpen.Tag[] SheetTagAry = null;
theUfSession.Draw.AskDrawings(out SheetCount, out SheetTagAry);
//取得最後一顆泡泡的數字
int MaxBallonNum;
try
{
MaxBallonNum = Convert.ToInt32(workPart.GetStringAttribute(CaxME.DimenAttr.BallonNum));
}
catch (System.Exception ex)
{
MaxBallonNum = 0;
}
if (chb_Regeneration.Checked == true)
{
#region 刪除全部泡泡
IdSymbolCollection BallonCollection = workPart.Annotations.IdSymbols;
IdSymbol[] BallonAry = BallonCollection.ToArray();
foreach (IdSymbol i in BallonAry)
{
try
{
i.GetStringAttribute("BalloonAtt");
}
catch (System.Exception ex)
{
continue;
}
CaxPublic.DelectObject(i);
}
workPart.DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, "BALLONNUM");
#endregion
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
if (i == 0)
{
Variables.FirstDrawingSheet = CurrentSheet;
}
int BallonNum = 0;
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
string diCount = "", fixDiemnsion = "";
#region 刪除尺寸數量產生的文字(ex:a-c)
try
{
diCount = singleObj.GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
diCount = "";
}
try
{
fixDiemnsion = singleObj.GetStringAttribute(CaxME.DimenAttr.FixDimension);
}
catch (System.Exception ex)
{
fixDiemnsion = "";
}
if (diCount != "" && fixDiemnsion == "")
{
CaxPublic.DelectObject(singleObj);
}
#endregion
string AssignExcelType = "";
#region 判斷是否有屬性，沒有屬性就跳下一個
try { AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.FixDimension); }
catch (System.Exception ex) { continue; }
#endregion
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(singleObj.Tag, out cBoxCoordinate);
#region 計算泡泡座標
CaxME.DimenData sDimenData = new CaxME.DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
CaxME.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
sDimenData.CurrentSheet.Open();
Point3d BallonLocation = new Point3d();
BallonLocation.X = sDimenData.LocationX;
BallonLocation.Y = sDimenData.LocationY;
BallonNum++;
InsertBalloon(BallonNum, diCount, BallonLocation);
singleObj.SetAttribute(CaxME.DimenAttr.BallonNum, BallonNum.ToString());
}
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, BallonNum.ToString());
}
}
else if (chb_keepOrigination.Checked == true)
{
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
if (i == 0)
{
Variables.FirstDrawingSheet = CurrentSheet;
}
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
//判斷是否取到舊的尺寸，如果是就跳下一個
string OldBallonNum = "";
try
{
OldBallonNum = singleObj.GetStringAttribute(CaxME.DimenAttr.BallonNum);
continue;
}
catch (System.Exception ex) { }
string AssignExcelType = "";
#region 判斷是否有屬性，沒有屬性就跳下一個
try { AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.FixDimension); }
catch (System.Exception ex) { continue; }
#endregion
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(singleObj.Tag, out cBoxCoordinate);
#region 計算泡泡座標
CaxME.DimenData sDimenData = new CaxME.DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
CaxME.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
sDimenData.CurrentSheet.Open();
Point3d BallonLocation = new Point3d();
BallonLocation.X = sDimenData.LocationX;
BallonLocation.Y = sDimenData.LocationY;
MaxBallonNum++;
string diCount = "";
try
{
diCount = singleObj.GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
diCount = "1";
}
InsertBalloon(MaxBallonNum, diCount, BallonLocation);
singleObj.SetAttribute(CaxME.DimenAttr.BallonNum, MaxBallonNum.ToString());
}
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, MaxBallonNum.ToString());
}
}
MessageBox.Show("完成！");
}
private static void GetTextBoxCoordinate(string DimeType, NXObject singleObj, out CaxME.BoxCoordinate cBoxCoordinate)
{
cBoxCoordinate = new CaxME.BoxCoordinate();
if (DimeType == "NXOpen.Annotations.VerticalDimension")
{
#region VerticalDimension取Location
NXOpen.Annotations.VerticalDimension temp = (NXOpen.Annotations.VerticalDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.PerpendicularDimension")
{
#region PerpendicularDimension取Location
NXOpen.Annotations.PerpendicularDimension temp = (NXOpen.Annotations.PerpendicularDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.MinorAngularDimension")
{
#region MinorAngularDimension取Location
NXOpen.Annotations.MinorAngularDimension temp = (NXOpen.Annotations.MinorAngularDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.MajorAngularDimension")
{
#region MajorAngularDimension取Location
NXOpen.Annotations.MajorAngularDimension temp = (NXOpen.Annotations.MajorAngularDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.RadiusDimension")
{
#region MinorAngularDimension取Location
NXOpen.Annotations.RadiusDimension temp = (NXOpen.Annotations.RadiusDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.HorizontalDimension")
{
#region HorizontalDimension取Location
NXOpen.Annotations.HorizontalDimension temp = (NXOpen.Annotations.HorizontalDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.IdSymbol")
{
#region IdSymbol取Location
NXOpen.Annotations.IdSymbol temp = (NXOpen.Annotations.IdSymbol)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.Note")
{
#region Note取Location
NXOpen.Annotations.Note temp = (NXOpen.Annotations.Note)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.DraftingFcf")
{
#region DraftingFcf取Location
NXOpen.Annotations.DraftingFcf temp = (NXOpen.Annotations.DraftingFcf)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.Label")
{
#region Label取Location
NXOpen.Annotations.Label temp = (NXOpen.Annotations.Label)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.DraftingDatum")
{
#region DraftingDatum取Location
NXOpen.Annotations.DraftingDatum temp = (NXOpen.Annotations.DraftingDatum)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.DiameterDimension")
{
#region DiameterDimension取Location
NXOpen.Annotations.DiameterDimension temp = (NXOpen.Annotations.DiameterDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.AngularDimension")
{
#region AngularDimension取Location
NXOpen.Annotations.AngularDimension temp = (NXOpen.Annotations.AngularDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.CylindricalDimension")
{
#region CylindricalDimension取Location
NXOpen.Annotations.CylindricalDimension temp = (NXOpen.Annotations.CylindricalDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.ChamferDimension")
{
#region ChamferDimension取Location
NXOpen.Annotations.ChamferDimension temp = (NXOpen.Annotations.ChamferDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.HoleDimension")
{
#region HoleDimension取Location
NXOpen.Annotations.HoleDimension temp = (NXOpen.Annotations.HoleDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
//CaxLog.ShowListingWindow(cBoxCoordinate.lower_left[0].ToString());
//CaxLog.ShowListingWindow(cBoxCoordinate.lower_left[1].ToString());
//CaxLog.ShowListingWindow(cBoxCoordinate.lower_right[0].ToString());
//CaxLog.ShowListingWindow(cBoxCoordinate.lower_right[1].ToString());
//CaxLog.ShowListingWindow(cBoxCoordinate.upper_right[0].ToString());
//CaxLog.ShowListingWindow(cBoxCoordinate.upper_right[1].ToString());
//CaxLog.ShowListingWindow(cBoxCoordinate.upper_left[0].ToString());
//CaxLog.ShowListingWindow(cBoxCoordinate.upper_left[1].ToString());
//CaxLog.ShowListingWindow("----");
//CaxME.DrawTextBox(temp.Tag);
#endregion
}
else if (DimeType == "NXOpen.Annotations.ParallelDimension")
{
#region ParallelDimension取Location
NXOpen.Annotations.ParallelDimension temp = (NXOpen.Annotations.ParallelDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.FoldedRadiusDimension")
{
#region FoldedRadiusDimension取Location
NXOpen.Annotations.FoldedRadiusDimension temp = (NXOpen.Annotations.FoldedRadiusDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.ArcLengthDimension")
{
#region ArcLengthDimension取Location
NXOpen.Annotations.ArcLengthDimension temp = (NXOpen.Annotations.ArcLengthDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.DraftingSurfaceFinish")
{
#region SurfaceFinish取Location
NXOpen.Annotations.DraftingSurfaceFinish temp = (NXOpen.Annotations.DraftingSurfaceFinish)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.ConcentricCircleDimension")
{
#region ConcentricCircle取Location
NXOpen.Annotations.ConcentricCircleDimension temp = (NXOpen.Annotations.ConcentricCircleDimension)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
else if (DimeType == "NXOpen.Annotations.Gdt")
{
#region GDT Symbol取Location
NXOpen.Annotations.Gdt temp = (NXOpen.Annotations.Gdt)singleObj;
CaxME.GetTextBoxCoordinate(temp.Tag, out cBoxCoordinate);
#endregion
}
}
//------------------------------------------------------------------------------
// Explicit Activation
// This entry point is used to activate the application explicitly
//------------------------------------------------------------------------------
public static int Main(string[] args)
{
int retValue = 0;
try
{
theProgram = new Program();
Session theSession = Session.GetSession();
Part workPart = theSession.Parts.Work;
Part displayPart = theSession.Parts.Display;
int module_id;
theUfSession.UF.AskApplicationModule(out module_id);
if (module_id != UFConstants.UF_APP_DRAFTING)
{
MessageBox.Show("請先轉換為製圖模組後再執行！");
return(retValue);
}
bool status, Is_Keep;
//抓取目前圖紙數量和Tag
//取得全部尺寸資料，並整理出尺寸落在的圖紙&尺寸設定的自定義泡泡再填入Panel中(當使用者點自定義時使用)
int SheetCount = 0;
NXOpen.Tag[] SheetTagAry = null;
theUfSession.Draw.AskDrawings(out SheetCount, out SheetTagAry);
Dictionary <NXObject, Sheet_DefineNum> DicUserDefine = new Dictionary <NXObject, Sheet_DefineNum>();
for (int i = 0; i < SheetCount; i++)
{
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
CurrentSheet.View.UpdateDisplay();
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
GetUserDefineData(SheetObj, CurrentSheet.Name, ref DicUserDefine);
}
NXOpen.Drawings.DrawingSheet DefaultSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[0]);
DefaultSheet.Open();
Application.EnableVisualStyles();
CreateBallonDlg cCreateBallonDlg = new CreateBallonDlg(DicUserDefine);
FormUtilities.ReparentForm(cCreateBallonDlg);
System.Windows.Forms.Application.Run(cCreateBallonDlg);
if (cCreateBallonDlg.DialogResult == DialogResult.Yes)
{
Is_Keep = cCreateBallonDlg.Is_Keep;
cCreateBallonDlg.Dispose();
}
else
{
((NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[0])).Open();
cCreateBallonDlg.Dispose();
theProgram.Dispose();
return(retValue);
}
#region 前置處理
string Is_Local = Environment.GetEnvironmentVariable("UGII_ENV_FILE");
CoordinateData cCoordinateData = new CoordinateData();
if (Is_Local != null)
{
//取得圖紙範圍資料Data
status = CaxGetDatData.GetDraftingCoordinateData(out cCoordinateData);
if (!status)
{
return(retValue);
}
}
else
{
string DraftingCoordinate_dat = "DraftingCoordinate.dat";
string DraftingCoordinate_Path = string.Format(@"{0}\{1}", "D:", DraftingCoordinate_dat);
CaxPublic.ReadCoordinateData(DraftingCoordinate_Path, out cCoordinateData);
}
//圖紙長、高
double SheetLength = 0;
double SheetHeight = 0;
//取得最後一顆泡泡的數字
int MaxBallonNum;
try
{
MaxBallonNum = Convert.ToInt32(workPart.GetStringAttribute(CaxME.DimenAttr.BallonNum));
}
catch (System.Exception ex)
{
MaxBallonNum = 0;
}
#endregion
//重新產生泡泡
if (Is_Keep == false)
{
#region 刪除全部泡泡
IdSymbolCollection BallonCollection = workPart.Annotations.IdSymbols;
IdSymbol[] BallonAry = BallonCollection.ToArray();
foreach (IdSymbol i in BallonAry)
{
try
{
i.GetStringAttribute("BalloonAtt");
}
catch (System.Exception ex)
{
continue;
}
CaxPublic.DelectObject(i);
}
workPart.DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, "BALLONNUM");
#endregion
#region 存DicDimenData(string=檢具名稱,DimenData=尺寸物件、泡泡座標)
DefineParam.DicDimenData = new Dictionary <string, List <DimenData> >();
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
//string SheetName = "S" + (i + 1).ToString();
//CaxME.SheetRename(CurrentSheet, SheetName);
CurrentSheet.Open();
if (i == 0)
{
DefineParam.FirstDrawingSheet = CurrentSheet;
}
//取得圖紙長、高
SheetLength = CurrentSheet.Length;
SheetHeight = CurrentSheet.Height;
//DisplayableObject[] SheetObj = CurrentSheet.View.AskVisibleObjects();
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
#region 刪除尺寸數量產生的文字(ex:a-c)
string dicount = "", chekcLevel = "";
try
{
dicount = singleObj.GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
dicount = "";
}
try
{
chekcLevel = singleObj.GetStringAttribute(CaxME.DimenAttr.CheckLevel);
}
catch (System.Exception ex)
{
chekcLevel = "";
}
if (dicount != "" && chekcLevel == "")
{
CaxPublic.DelectObject(singleObj);
}
#endregion
string Gauge = "", AssignExcelType = "";
#region 判斷是否有屬性，沒有屬性就跳下一個
try{ AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.AssignExcelType); }
catch (System.Exception ex) { continue; }
try{ Gauge = singleObj.GetStringAttribute(CaxME.DimenAttr.Gauge); }
catch (System.Exception ex) { }
#endregion
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
//string DimeType = singleObj.GetType().ToString();
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
//GetTextBoxCoordinate(DimeType, singleObj, out cBoxCoordinate);
//可以將NXOpen直接轉型成Annotation
CaxME.GetTextBoxCoordinate(((NXOpen.Annotations.Annotation)singleObj).Tag, out cBoxCoordinate);
#region 計算泡泡座標
DimenData sDimenData = new DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
Functions.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
if (Gauge != "")
{
List <DimenData> ListDimenData = new List <DimenData>();
status = DefineParam.DicDimenData.TryGetValue(Gauge, out ListDimenData);
if (!status)
{
ListDimenData = new List <DimenData>();
}
ListDimenData.Add(sDimenData);
DefineParam.DicDimenData[Gauge] = ListDimenData;
}
}
}
#endregion
//插入泡泡
int BallonNum = 0;
InsertBallon(ref BallonNum, cCoordinateData, SheetHeight, SheetLength, "BalloonAtt");
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, BallonNum.ToString());
}
//保留泡泡
else
{
#region 存DicDimenData(string=檢具名稱,DimenData=尺寸物件、泡泡座標)
DefineParam.DicDimenData = new Dictionary <string, List <DimenData> >();
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
NXOpen.Drawings.DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
if (i == 0)
{
DefineParam.FirstDrawingSheet = CurrentSheet;
}
//取得圖紙長、高
SheetLength = CurrentSheet.Length;
SheetHeight = CurrentSheet.Height;
//DisplayableObject[] SheetObj = CurrentSheet.View.AskVisibleObjects();
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
//判斷是否取到舊的尺寸，如果是就跳下一個
string OldBallonNum = "";
try
{
OldBallonNum = singleObj.GetStringAttribute(CaxME.DimenAttr.BallonNum);
continue;
}
catch (System.Exception ex) { }
//判斷是否有屬性，沒有屬性就跳下一個
string Gauge = "", AssignExcelType = "";
try { AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.AssignExcelType); }
catch (System.Exception ex) { continue; }
try { Gauge = singleObj.GetStringAttribute(CaxME.DimenAttr.Gauge); }
catch (System.Exception ex) { }
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
//string DimeType = "";
//DimeType = singleObj.GetType().ToString();
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
//GetTextBoxCoordinate(DimeType, singleObj, out cBoxCoordinate);
//CaxLog.ShowListingWindow(cBoxCoordinate.lower_left[0].ToString());
CaxME.GetTextBoxCoordinate(((NXOpen.Annotations.Annotation)singleObj).Tag, out cBoxCoordinate);
//CaxLog.ShowListingWindow(cBoxCoordinate.lower_left[0].ToString());
#region 計算泡泡座標
DimenData sDimenData = new DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
Functions.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
if (Gauge != "")
{
List <DimenData> ListDimenData = new List <DimenData>();
status = DefineParam.DicDimenData.TryGetValue(Gauge, out ListDimenData);
if (!status)
{
ListDimenData = new List <DimenData>();
}
ListDimenData.Add(sDimenData);
DefineParam.DicDimenData[Gauge] = ListDimenData;
}
}
}
#endregion
if (DefineParam.DicDimenData.Count != 0)
{
//插入泡泡
InsertBallon(ref MaxBallonNum, cCoordinateData, SheetHeight, SheetLength, "BalloonAtt");
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, MaxBallonNum.ToString());
}
}
//切回第一張Sheet
DefineParam.FirstDrawingSheet.Open();
MessageBox.Show("完成");
theProgram.Dispose();
}
catch (NXOpen.NXException ex)
{
// ---- Enter your exception handling code here -----
CaxLog.ShowListingWindow(ex.ToString());
}
return(retValue);
}
private static void InsertBallon(ref int MaxBallonNum, CoordinateData cCoordinateData, double SheetHeight, double SheetLength, string BalloonAtt)
{
double BallonNumSize = 0;
foreach (KeyValuePair <string, List <DimenData> > kvp in DefineParam.DicDimenData)
{
List <DimenData> tempListDimenData = new List <DimenData>();
DefineParam.DicDimenData.TryGetValue(kvp.Key, out tempListDimenData);
for (int i = 0; i < tempListDimenData.Count; i++)
{
tempListDimenData[i].CurrentSheet.Open();
MaxBallonNum++;
Point3d BallonLocation = new Point3d();
BallonLocation.X = tempListDimenData[i].LocationX;
BallonLocation.Y = tempListDimenData[i].LocationY;
//決定數字的大小
if (MaxBallonNum <= 9)
{
BallonNumSize = 2.5;
}
else if (MaxBallonNum > 9 && MaxBallonNum <= 99)
{
BallonNumSize = 1.5;
}
else
{
BallonNumSize = 1;
}
NXObject balloonObj = null;
CaxME.CreateBallonOnSheet(MaxBallonNum.ToString(), BallonLocation, BallonNumSize, BalloonAtt, out balloonObj);
//取得該尺寸數量
string diCount = "";
try
{
diCount = tempListDimenData[i].Obj.GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
//當遇到舊料號沒有Dicount的屬性時，在這邊補上
tempListDimenData[i].Obj.SetAttribute(CaxME.DimenAttr.DiCount, "1");
diCount = "1";
}
//如果大於1表示要插入a.b.c.....
if (diCount != "1")
{
//文字座標
CaxME.BoxCoordinate sBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(balloonObj.Tag, out sBoxCoordinate);
Point3d textCoord = new Point3d(sBoxCoordinate.lower_left[0] + 1.5, sBoxCoordinate.lower_left[1] - 1.5, 0);
string countText = Convert.ToChar(65 + 0).ToString().ToLower() + "-" + Convert.ToChar(65 + Convert.ToInt32(diCount) - 1).ToString().ToLower();
CaxME.InsertDicountNote(MaxBallonNum.ToString(), CaxME.DimenAttr.DiCount, countText, "1.8", textCoord);
}
//取得該尺寸所在圖紙
string SheetNum = tempListDimenData[i].Obj.GetStringAttribute("SheetName");
#region 計算泡泡相對位置
//計算泡泡相對位置
string RegionX = "", RegionY = "";
for (int ii = 0; ii < cCoordinateData.DraftingCoordinate.Count; ii++)
{
string SheetSize = cCoordinateData.DraftingCoordinate[ii].SheetSize;
if (Math.Ceiling(SheetHeight) != Convert.ToDouble(SheetSize.Split(',')[0]) || Math.Ceiling(SheetLength) != Convert.ToDouble(SheetSize.Split(',')[1]))
{
continue;
}
//比對X
for (int j = 0; j < cCoordinateData.DraftingCoordinate[ii].RegionX.Count; j++)
{
string X0 = cCoordinateData.DraftingCoordinate[ii].RegionX[j].X0;
string X1 = cCoordinateData.DraftingCoordinate[ii].RegionX[j].X1;
if (BallonLocation.X >= Convert.ToDouble(X0) && BallonLocation.X <= Convert.ToDouble(X1))
{
RegionX = cCoordinateData.DraftingCoordinate[ii].RegionX[j].Zone;
}
}
//比對Y
for (int j = 0; j < cCoordinateData.DraftingCoordinate[ii].RegionY.Count; j++)
{
string Y0 = cCoordinateData.DraftingCoordinate[ii].RegionY[j].Y0;
string Y1 = cCoordinateData.DraftingCoordinate[ii].RegionY[j].Y1;
if (BallonLocation.Y >= Convert.ToDouble(Y0) && BallonLocation.Y <= Convert.ToDouble(Y1))
{
RegionY = cCoordinateData.DraftingCoordinate[ii].RegionY[j].Zone;
}
}
}
#endregion
tempListDimenData[i].Obj.SetAttribute(CaxME.DimenAttr.BallonNum, MaxBallonNum.ToString());
tempListDimenData[i].Obj.SetAttribute(CaxME.DimenAttr.BallonLocation, SheetNum + "-" + RegionY + RegionX);
}
}
}
private void InsertBalloon(GridRow row, CoordinateData cCoordinateData)
{
//取得圖紙長、高
NXOpen.Drawings.DrawingSheet drawingSheet1 = (NXOpen.Drawings.DrawingSheet)workPart.DrawingSheets.FindObject(row.Cells["尺寸位置"].Value.ToString());
drawingSheet1.Open();
double SheetLength = drawingSheet1.Length;
double SheetHeight = drawingSheet1.Height;
//事先塞入該尺寸所在Sheet
((NXObject)row.Cells["Dimension"].Value).SetAttribute(CaxME.DimenAttr.SheetName, row.Cells["尺寸位置"].Value.ToString());
//計算泡泡座標
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(((NXOpen.Annotations.Annotation)row.Cells["Dimension"].Value).Tag, out cBoxCoordinate);
DimenData sDimenData = new DimenData();
Functions.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
Point3d BallonLocation = new Point3d();
BallonLocation.X = sDimenData.LocationX;
BallonLocation.Y = sDimenData.LocationY;
//決定數字的大小
double BallonNumSize = 0;
if (Convert.ToInt32(row.Cells["自定泡泡號"].Value) <= 9)
{
BallonNumSize = 2.5;
}
else if (Convert.ToInt32(row.Cells["自定泡泡號"].Value) > 9 && Convert.ToInt32(row.Cells["自定泡泡號"].Value) <= 99)
{
BallonNumSize = 1.5;
}
else
{
BallonNumSize = 1;
}
NXObject balloonObj = null;
CaxME.CreateBallonOnSheet(row.Cells["自定泡泡號"].Value.ToString(), BallonLocation, BallonNumSize, "BalloonAtt", out balloonObj);
//取得該尺寸數量
string diCount = "";
try
{
diCount = ((NXObject)row.Cells["Dimension"].Value).GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
//當遇到舊料號沒有Dicount的屬性時，在這邊補上
((NXObject)row.Cells["Dimension"].Value).SetAttribute(CaxME.DimenAttr.DiCount, "1");
diCount = "1";
}
//如果大於1表示要插入a.b.c.....
if (diCount != "1")
{
//文字座標
CaxME.BoxCoordinate sBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(balloonObj.Tag, out sBoxCoordinate);
Point3d textCoord = new Point3d(sBoxCoordinate.lower_left[0] + 1.5, sBoxCoordinate.lower_left[1] - 1.5, 0);
string countText = Convert.ToChar(65 + 0).ToString().ToLower() + "-" + Convert.ToChar(65 + Convert.ToInt32(diCount) - 1).ToString().ToLower();
CaxME.InsertDicountNote(row.Cells["自定泡泡號"].Value.ToString(), CaxME.DimenAttr.DiCount, countText, "1.8", textCoord);
}
#region 計算泡泡相對位置
string RegionX = "", RegionY = "";
for (int ii = 0; ii < cCoordinateData.DraftingCoordinate.Count; ii++)
{
string SheetSize = cCoordinateData.DraftingCoordinate[ii].SheetSize;
if (Math.Ceiling(SheetHeight) != Convert.ToDouble(SheetSize.Split(',')[0]) || Math.Ceiling(SheetLength) != Convert.ToDouble(SheetSize.Split(',')[1]))
{
continue;
}
//比對X
for (int j = 0; j < cCoordinateData.DraftingCoordinate[ii].RegionX.Count; j++)
{
string X0 = cCoordinateData.DraftingCoordinate[ii].RegionX[j].X0;
string X1 = cCoordinateData.DraftingCoordinate[ii].RegionX[j].X1;
if (BallonLocation.X >= Convert.ToDouble(X0) && BallonLocation.X <= Convert.ToDouble(X1))
{
RegionX = cCoordinateData.DraftingCoordinate[ii].RegionX[j].Zone;
}
}
//比對Y
for (int j = 0; j < cCoordinateData.DraftingCoordinate[ii].RegionY.Count; j++)
{
string Y0 = cCoordinateData.DraftingCoordinate[ii].RegionY[j].Y0;
string Y1 = cCoordinateData.DraftingCoordinate[ii].RegionY[j].Y1;
if (BallonLocation.Y >= Convert.ToDouble(Y0) && BallonLocation.Y <= Convert.ToDouble(Y1))
{
RegionY = cCoordinateData.DraftingCoordinate[ii].RegionY[j].Zone;
}
}
}
#endregion
((NXObject)row.Cells["Dimension"].Value).SetAttribute(CaxME.DimenAttr.BallonNum, row.Cells["自定泡泡號"].Value.ToString());
((NXObject)row.Cells["Dimension"].Value).SetAttribute(CaxME.DimenAttr.BallonLocation, row.Cells["尺寸位置"].Value.ToString() + "-" + RegionY + RegionX);
workPart.Views.Refresh();
}
private void OK_Click(object sender, EventArgs e)
{
//抓取目前圖紙數量和Tag
int SheetCount = 0;
NXOpen.Tag[] SheetTagAry = null;
theUfSession.Draw.AskDrawings(out SheetCount, out SheetTagAry);
//取得最後一顆泡泡的數字
int MaxBallonNum;
try
{
MaxBallonNum = Convert.ToInt32(workPart.GetStringAttribute(CaxME.DimenAttr.BallonNum));
}
catch (System.Exception ex)
{
MaxBallonNum = 0;
}
if (chb_Regeneration.Checked == true)
{
#region 刪除全部泡泡
IdSymbolCollection BallonCollection = workPart.Annotations.IdSymbols;
IdSymbol[] BallonAry = BallonCollection.ToArray();
foreach (IdSymbol i in BallonAry)
{
try
{
i.GetStringAttribute("BalloonAtt");
}
catch (System.Exception ex)
{
continue;
}
CaxPublic.DelectObject(i);
}
workPart.DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, "BALLONNUM");
#endregion
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
if (i == 0)
{
Variables.FirstDrawingSheet = CurrentSheet;
}
int BallonNum = 0;
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
string diCount = "", fixDiemnsion = "";
#region 刪除尺寸數量產生的文字(ex:a-c)
try
{
diCount = singleObj.GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
diCount = "";
}
try
{
fixDiemnsion = singleObj.GetStringAttribute(CaxME.DimenAttr.FixDimension);
}
catch (System.Exception ex)
{
fixDiemnsion = "";
}
if (diCount != "" && fixDiemnsion == "")
{
CaxPublic.DelectObject(singleObj);
}
#endregion
string AssignExcelType = "";
#region 判斷是否有屬性，沒有屬性就跳下一個
try { AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.FixDimension); }
catch (System.Exception ex) { continue; }
#endregion
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(singleObj.Tag, out cBoxCoordinate);
#region 計算泡泡座標
CaxME.DimenData sDimenData = new CaxME.DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
CaxME.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
sDimenData.CurrentSheet.Open();
Point3d BallonLocation = new Point3d();
BallonLocation.X = sDimenData.LocationX;
BallonLocation.Y = sDimenData.LocationY;
BallonNum++;
InsertBalloon(BallonNum, diCount, BallonLocation);
singleObj.SetAttribute(CaxME.DimenAttr.BallonNum, BallonNum.ToString());
}
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, BallonNum.ToString());
}
}
else if (chb_keepOrigination.Checked == true)
{
for (int i = 0; i < SheetCount; i++)
{
//打開Sheet並記錄所有OBJ
DrawingSheet CurrentSheet = (NXOpen.Drawings.DrawingSheet)NXObjectManager.Get(SheetTagAry[i]);
CurrentSheet.Open();
if (i == 0)
{
Variables.FirstDrawingSheet = CurrentSheet;
}
NXObject[] SheetObj = CaxME.FindObjectsInView(CurrentSheet.View.Tag).ToArray();
foreach (NXObject singleObj in SheetObj)
{
//判斷是否取到舊的尺寸，如果是就跳下一個
string OldBallonNum = "";
try
{
OldBallonNum = singleObj.GetStringAttribute(CaxME.DimenAttr.BallonNum);
continue;
}
catch (System.Exception ex) { }
string AssignExcelType = "";
#region 判斷是否有屬性，沒有屬性就跳下一個
try { AssignExcelType = singleObj.GetStringAttribute(CaxME.DimenAttr.FixDimension); }
catch (System.Exception ex) { continue; }
#endregion
//事先塞入該尺寸所在Sheet
singleObj.SetAttribute("SheetName", CurrentSheet.Name);
CaxME.BoxCoordinate cBoxCoordinate = new CaxME.BoxCoordinate();
CaxME.GetTextBoxCoordinate(singleObj.Tag, out cBoxCoordinate);
#region 計算泡泡座標
CaxME.DimenData sDimenData = new CaxME.DimenData();
sDimenData.Obj = singleObj;
sDimenData.CurrentSheet = CurrentSheet;
CaxME.CalculateBallonCoordinate(cBoxCoordinate, ref sDimenData);
#endregion
sDimenData.CurrentSheet.Open();
Point3d BallonLocation = new Point3d();
BallonLocation.X = sDimenData.LocationX;
BallonLocation.Y = sDimenData.LocationY;
MaxBallonNum++;
string diCount = "";
try
{
diCount = singleObj.GetStringAttribute(CaxME.DimenAttr.DiCount);
}
catch (System.Exception ex)
{
diCount = "1";
}
InsertBalloon(MaxBallonNum, diCount, BallonLocation);
singleObj.SetAttribute(CaxME.DimenAttr.BallonNum, MaxBallonNum.ToString());
}
//將最後一顆泡泡的數字插入零件中
workPart.SetAttribute(CaxME.DimenAttr.BallonNum, MaxBallonNum.ToString());
}
}
else if (chb_UserDefine.Checked == true)
{
//判斷所有的泡泡是否有重複
List <string> ListIsRepeat = new List <string>();
foreach (GridRow i in SGC.PrimaryGrid.Rows)
{
if (i.Cells["自定泡泡號"].Value.ToString() == "")
{
continue;
}
if (ListIsRepeat.Contains(i.Cells["自定泡泡號"].Value.ToString()))
{
MessageBox.Show("泡泡號【" + i.Cells["自定泡泡號"].Value.ToString() + "】重複，請重新檢查");
return;
}
else
{
ListIsRepeat.Add(i.Cells["自定泡泡號"].Value.ToString());
}
}
CoordinateData cCoordinateData = new CoordinateData();
CaxGetDatData.GetDraftingCoordinateData(out cCoordinateData);
//開始插入自定義泡泡
foreach (GridRow i in SGC.PrimaryGrid.Rows)
{
//判斷是否有舊的泡泡，如果舊泡泡與自定的相同，則跳下一個
//判斷是否有舊的泡泡，如果舊泡泡與自定的不相同，則先刪除泡泡再重新產生
//如有Dicount也要加入一起生成
//如果沒有自定泡泡就跳下一個row
if (i.Cells["自定泡泡號"].Value.ToString() == "")
{
//判斷是否需刪除已存在的泡泡
NXOpen.Drawings.DrawingSheet drawingSheet1 = (NXOpen.Drawings.DrawingSheet)workPart.DrawingSheets.FindObject(i.Cells["尺寸位置"].Value.ToString());
string oldBalloon = "";
try
{
oldBalloon = ((NXObject)i.Cells["Dimension"].Value).GetStringAttribute(CaxME.DimenAttr.BallonNum);
}
catch (System.Exception ex)
{
continue;
}
NXObject[] SheetObj = CaxME.FindObjectsInView(drawingSheet1.View.Tag).ToArray();
CaxME.DeleteBallon(oldBalloon, SheetObj);
workPart.Views.Refresh();
//刪除屬性
((NXObject)i.Cells["Dimension"].Value).DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, CaxME.DimenAttr.BallonNum);
((NXObject)i.Cells["Dimension"].Value).DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, CaxME.DimenAttr.BallonLocation);
((NXObject)i.Cells["Dimension"].Value).DeleteAttributeByTypeAndTitle(NXObject.AttributeType.String, CaxME.DimenAttr.SheetName);
continue;
}
//如果回傳False，表示舊泡泡=自定泡泡；如果回傳True，表示舊泡泡=\=自定泡泡
if (!JudgmentBalloon(i))
{
continue;
}
InsertBalloon(i, cCoordinateData);
}
if (exOnj != null)
{
exOnj.Unhighlight();
workPart.Views.Refresh();
}
}
MessageBox.Show("完成！");
}