/*
* This routine is used to invert the hole points, specifically the 'Y' points.
* The html canvas has 0,0 at the upper left and 'Y' goes down. For the holegroup canvas
* we want a 'Y' that goes up, because that's how the holes are overlaid and appear in
* three dimensions, and how we think of them intuitively. To manage this we'll simply flip the
* Y points for the duration of the time that they are being edited and reflip them when its time to save
*/
public void InvertHolePoints()
{
for (int i = 0; i < HoleGroupList.Count; i++)
{
HoleGroup hg = HoleGroupList.GetFrom(i);
for (int j = 0; j < hg.HoleList.Length; j++)
{
/*
* For all hole types the offset Y is inverted
*/
LayoutHole oHole = hg.HoleList[j];
oHole.OffsetY = -oHole.OffsetY;
/*
* For polygon hole types the individual Y's are inverted
*/
if (oHole.HoleType == "poly")
{
BoundaryPolygon oPolygon = BoundaryPolygonList.GetFrom(oHole.HoleTypeIndex);
for (int k = 0; k < oPolygon.PointList.Length; k++)
{
Point3D p = oPolygon.PointList[k];
p.Y = -p.Y;
}
}
}
}
}
//------------------------------------------------------
private void DrawShapes_Polygon(LayoutHole oHole, bool IsCurrentHole)
{
BoundaryPolygon bp = BoundaryPolygonList.GetFrom(oHole.HoleTypeIndex);
PointF ScreenOffset = this.W2S(oHole.OffsetX, oHole.OffsetY);
for (int i = 0; i < bp.PointList.Length; i++)
{
int FromIndex = i;
int ToIndex = i + 1;
if (ToIndex == bp.PointList.Length)
{
ToIndex = 0; // Wrap at end
}
Point3D FromPoint = bp.PointList[FromIndex];
float fdx = FromPoint.X / CurrentZoom;
float fdy = FromPoint.Y / CurrentZoom;
Point3D ToPoint = bp.PointList[ToIndex];
float tdx = ToPoint.X / CurrentZoom;
float tdy = ToPoint.Y / CurrentZoom;
PointF ScreenFrom = new PointF(ScreenOffset.X + fdx, ScreenOffset.Y + fdy);
PointF ScreenTo = new PointF(ScreenOffset.X + tdx, ScreenOffset.Y + tdy);
// Draw handles
string color = "rgba(255,0,0,.5)";
if (IsCurrentHole && i == MostRecentlySelectedPolygonVertexIndex)
{
color = "#0000FF";
}
this.DrawCircle(color, 10, ScreenFrom.X, ScreenFrom.Y);
PointF oCenter = EdgeCenter(ScreenFrom, ScreenTo);
// Draw the handle for the edge
color = "rgba(0,255,0,.5)";
if (IsCurrentHole && i == MostRecentlySelectedPolygonEdgeIndex)
{
color = "#0000FF";
}
this.DrawRectangle(color, 10, 10, oCenter.X, oCenter.Y);
// Draw Line
this.DrawLine(ShapeStrokeColor, (float)0.5, ScreenFrom, ScreenTo);
// Draw the move handle
PointF oMove = PolygonCenter(bp);
float mdx = oMove.X / CurrentZoom;
float mdy = oMove.Y / CurrentZoom;
oMove = new PointF(ScreenOffset.X + mdx, ScreenOffset.Y + mdy);
color = IsCurrentHole ? "#0000FF" : "rgba(255,0,0,.5)";
// Draw the move handle
this.DrawCircle(color, 10, oMove.X, oMove.Y);
}
}
// If the cur
public void SplitCurrentPolygonEdge()
{
if (MostRecentlySelectedHole == null)
{
return;
}
if (MostRecentlySelectedHole.HoleType != "poly")
{
return;
}
if (MostRecentlySelectedPolygonEdgeIndex == -1)
{
return;
}
BoundaryPolygon oPolygon = BoundaryPolygonList.GetFrom(MostRecentlySelectedHole.HoleTypeIndex);
/*
* Locate this edge and create a new point in between the surrounding points
*/
int FromIndex = MostRecentlySelectedPolygonEdgeIndex;
int ToIndex = FromIndex + 1;
if (ToIndex == oPolygon.PointList.Length)
{
ToIndex = 0;
}
Point3D FromPoint = oPolygon.PointList[FromIndex];
Point3D ToPoint = oPolygon.PointList[ToIndex];
PointF pF = new PointF(FromPoint.X, FromPoint.Y);
PointF pT = new PointF(ToPoint.X, ToPoint.Y);
PointF oCenter = EdgeCenter(pF, pT);
Point3D pNew = new Point3D();
pNew.X = oCenter.X;
pNew.Y = oCenter.Y;
#if DOTNET
List <Point3D> tmp = new List <Point3D>(oPolygon.PointList);
tmp.Insert(FromIndex + 1, pNew);
oPolygon.PointList = tmp.ToArray();
#else
oPolygon.PointList.splice(FromIndex + 1, 0, pNew);
#endif
// trigger repaint
DrawShapes();
}
// Add a polygon. This is managed with a simplelayout object
public void AddPolygon(int ScreenOffsetX, int ScreenOffsetY, int InitialSides, int Radius)
{
if (MostRecentlySelectedHoleGroup == null)
{
return;
}
BoundaryPolygon oPolygon = new BoundaryPolygon();
oPolygon.PointList = new Point3D[InitialSides];
float Angle = 0;
float AngleDelta = (float)Math.PI * 2 / InitialSides;
for (int i = 0; i < InitialSides; i++)
{
Point3D p = new Point3D();
#if DOTNET
float x = (float)Math.Cos(Angle) * Radius;
float y = (float)Math.Sin(Angle) * Radius;
#else
float x = (float)Math.cos(Angle) * Radius;
float y = (float)Math.sin(Angle) * Radius;
#endif
p.X = x;
p.Y = y;
oPolygon.PointList[i] = p;
Angle += AngleDelta;
}
/*
* Create a hole and boundary polygon object
*/
PointF WorldOffset = this.S2W(ScreenOffsetX, ScreenOffsetY);
LayoutHole oHole = new LayoutHole();
oHole.HoleType = "poly";
oHole.HoleTypeIndex = BoundaryPolygonList.Count;
oHole.OffsetX = WorldOffset.X;
oHole.OffsetY = WorldOffset.Y;
AddHoleToHoleGroup(MostRecentlySelectedHoleGroup, oHole);
CurrentlySelectedHole = oHole;
MostRecentlySelectedHole = oHole;
BoundaryPolygonList.Add(oPolygon);
// trigger redraw
DrawShapes();
}
public void DuplicateCurrentHole()
{
if (MostRecentlySelectedHole == null)
{
return;
}
LayoutHole oHole = LayoutHole.CopyFrom(MostRecentlySelectedHole);
// Add at an offset so it will be easy to see
oHole.OffsetX += 10;
oHole.OffsetY += 10;
// Create a new version of the instance of the hole
int ndx = MostRecentlySelectedHole.HoleTypeIndex;
switch (MostRecentlySelectedHole.HoleType)
{
case "ell":
oHole.HoleTypeIndex = BoundaryEllipseList.Count;
BoundaryEllipse e = BoundaryEllipseList.GetFrom(ndx);
BoundaryEllipseList.Add(BoundaryEllipse.CopyFrom(e));
break;
case "rect":
oHole.HoleTypeIndex = BoundaryRectangleList.Count;
BoundaryRectangle r = BoundaryRectangleList.GetFrom(ndx);
BoundaryRectangleList.Add(BoundaryRectangle.CopyFrom(r));
break;
case "poly":
oHole.HoleTypeIndex = BoundaryPolygonList.Count;
BoundaryPolygon p = BoundaryPolygonList.GetFrom(ndx);
BoundaryPolygonList.Add(BoundaryPolygon.CopyFrom(p));
break;
}
// Add the new hole to the hole group
AddHoleToHoleGroup(MostRecentlySelectedHoleGroup, oHole);
// trigger a repaint
DrawShapes();
}
public void RemoveCurrentPolygonVertex()
{
if (MostRecentlySelectedHole == null)
{
return;
}
if (MostRecentlySelectedHole.HoleType != "poly")
{
return;
}
if (MostRecentlySelectedPolygonVertexIndex == -1)
{
return;
}
BoundaryPolygon oPolygon = BoundaryPolygonList.GetFrom(MostRecentlySelectedHole.HoleTypeIndex);
// Don't reduce to less than 3 points
if (oPolygon.PointList.Length == 3)
{
return;
}
/*
* Remove this point and clear the most recently selected edge
*/
#if DOTNET
List <Point3D> tmp = new List <Point3D>(oPolygon.PointList);
tmp.RemoveAt(MostRecentlySelectedPolygonVertexIndex);
oPolygon.PointList = tmp.ToArray();
#else
oPolygon.PointList.splice(this.MostRecentlySelectedPolygonVertexIndex, 1);
#endif
MostRecentlySelectedPolygonVertexIndex = -1;
// trigger a redraw
DrawShapes();
}
public void DeleteCurrentHole()
{
if (MostRecentlySelectedHole == null)
{
return;
}
int IndexToDelete = -1;
switch (MostRecentlySelectedHole.HoleType)
{
case "ell":
// Delete this index
// Find all references to hole values greater than this one and reduce them by one so the indices are correct
IndexToDelete = -1;
for (int i = 0; i < GetHoleListLength(MostRecentlySelectedHoleGroup.HoleList); i++)
{
LayoutHole oHole = MostRecentlySelectedHoleGroup.HoleList[i];
if (MostRecentlySelectedHole == oHole)
{
IndexToDelete = i;
}
if (oHole.HoleType == "ell" && oHole.HoleTypeIndex > MostRecentlySelectedHole.HoleTypeIndex)
{
oHole.HoleTypeIndex--;
}
}
// Delete this hole
RemoveHoleFromHoleGroup(MostRecentlySelectedHoleGroup, IndexToDelete);
// Delete this shape
BoundaryEllipseList.RemoveAt(MostRecentlySelectedHole.HoleTypeIndex);
break;
case "rect":
// Delete this index
// Find all references to hole values greater than this one and reduce them by one so the indices are correct
IndexToDelete = -1;
for (int i = 0; i < GetHoleListLength(MostRecentlySelectedHoleGroup.HoleList); i++)
{
LayoutHole oHole = MostRecentlySelectedHoleGroup.HoleList[i];
if (MostRecentlySelectedHole == oHole)
{
IndexToDelete = i;
}
if (oHole.HoleType == "rect" && oHole.HoleTypeIndex > MostRecentlySelectedHole.HoleTypeIndex)
{
oHole.HoleTypeIndex--;
}
}
// Delete this hole
RemoveHoleFromHoleGroup(MostRecentlySelectedHoleGroup, IndexToDelete);
// Delete this shape
BoundaryRectangleList.RemoveAt(MostRecentlySelectedHole.HoleTypeIndex);
break;
case "poly":
// Find all references to hole values greater than this one and reduce them by one so the indices are correct
IndexToDelete = -1;
for (int i = 0; i < GetHoleListLength(MostRecentlySelectedHoleGroup.HoleList); i++)
{
LayoutHole oHole = MostRecentlySelectedHoleGroup.HoleList[i];
if (MostRecentlySelectedHole == oHole)
{
IndexToDelete = i;
}
if (oHole.HoleType == "poly" && oHole.HoleTypeIndex > MostRecentlySelectedHole.HoleTypeIndex)
{
oHole.HoleTypeIndex--;
}
}
// Delete this hole
RemoveHoleFromHoleGroup(MostRecentlySelectedHoleGroup, IndexToDelete);
// Delete this shape
BoundaryPolygonList.RemoveAt(MostRecentlySelectedHole.HoleTypeIndex);
break;
}
// trigger a repaint
DrawShapes();
}
//------------------------------------------------------------------------------------------------
protected void UpdatePolygon(int ScreenMouseX, int ScreenMouseY, int ScreenDeltaX, int ScreenDeltaY)
{
BoundaryPolygon oPolygon = BoundaryPolygonList.GetFrom(CurrentlySelectedHole.HoleTypeIndex);
PointF pWorld = this.S2W(ScreenMouseX, ScreenMouseY);
float newx = pWorld.X;
float newy = pWorld.Y;
// Update the world points to the nearest grid
if (this.GridSize > 1)
{
newx = this.RoundToGrid((int)pWorld.X);
newy = this.RoundToGrid((int)pWorld.Y);
}
switch (CurrentlySelectedHandleType)
{
case eHandleType.VertexHandle:
/*
* Retrieve this vertex and update
*/
Point3D p = oPolygon.PointList[CurrentlySelectedPolygonVertexIndex];
p.X += ScreenDeltaX * CurrentZoom;
p.Y += ScreenDeltaY * CurrentZoom;
break;
case eHandleType.EdgeHandle:
/*
* The points associated with the edge are the ones at the value and after
*/
int FromIndex = CurrentlySelectedPolygonEdgeIndex;
int ToIndex = FromIndex + 1;
if (ToIndex == oPolygon.PointList.Length)
{
ToIndex = 0;
}
Point3D FromPoint = oPolygon.PointList[FromIndex];
Point3D ToPoint = oPolygon.PointList[ToIndex];
FromPoint.X += ScreenDeltaX * CurrentZoom;
FromPoint.Y += ScreenDeltaY * CurrentZoom;
ToPoint.X += ScreenDeltaX * CurrentZoom;
ToPoint.Y += ScreenDeltaY * CurrentZoom;
break;
case eHandleType.MoveHandle:
/*
* Update the offset to move the whole shape
*/
CurrentlySelectedHole.OffsetX = newx;
CurrentlySelectedHole.OffsetY = newy;
/*
* Update all points with the delta
*/
#if false
for (int i = 0; i < oPolygon.PointList.Length; i++)
{
Point3D pMove = oPolygon.PointList[i];
pMove.X += ScreenDeltaX;
pMove.Y += ScreenDeltaY;
}
#endif
break;
}
}
//--------------------------------------------------------------------------
/*
* A Polygon can be selected in any of these ways:
* 1. A vertex can be selected, which makes it the active vertex
* 2. An edge can be selected, which makes it the active edge
* 3. The move handle can be selected. The move handle is generated as the average of the points of the polygon
*/
private bool TrySelectPolygon(LayoutHole oHole, int ScreenMouseX, int ScreenMouseY)
{
PointF MoveHandle = new PointF(0, 0);
float dx;
float dy;
BoundaryPolygon oPolygon = BoundaryPolygonList.GetFrom(oHole.HoleTypeIndex);
PointF ScreenOffset = this.W2S(oHole.OffsetX, oHole.OffsetY);
/*
* See if this is one of the vertices
*/
for (int i = 0; i < oPolygon.PointList.Length; i++)
{
Point3D p = oPolygon.PointList[i];
dx = p.X / CurrentZoom;
dy = p.Y / CurrentZoom;
PointF Target = new PointF(ScreenOffset.X + dx, ScreenOffset.Y + dy);
if (IsHitOnTarget(ScreenMouseX, ScreenMouseY, Target))
{
CurrentlySelectedHole = oHole;
// Most recently selected is used for commands that happen after the mouse is up
MostRecentlySelectedHole = oHole;
CurrentlySelectedHandleType = eHandleType.VertexHandle;
CurrentlySelectedPolygonVertexIndex = i;
// The most recently used is for commands that happen after the mouse is up
MostRecentlySelectedPolygonVertexIndex = i;
return(true);
}
}
/*
* See if this is one of the edges
*/
for (int i = 0; i < oPolygon.PointList.Length; i++)
{
int FromIndex = i;
int ToIndex = i + 1;
if (ToIndex == oPolygon.PointList.Length)
{
ToIndex = 0;
}
Point3D FromPoint = oPolygon.PointList[FromIndex];
dx = FromPoint.X / CurrentZoom;
dy = FromPoint.Y / CurrentZoom;
PointF pFrom = new PointF(ScreenOffset.X + dx, ScreenOffset.Y + dy);
Point3D ToPoint = oPolygon.PointList[ToIndex];
dx = ToPoint.X / CurrentZoom;
dy = ToPoint.Y / CurrentZoom;
PointF pTo = new PointF(ScreenOffset.X + dx, ScreenOffset.Y + dy);
PointF Target = EdgeCenter(pFrom, pTo);
if (IsHitOnTarget(ScreenMouseX, ScreenMouseY, Target))
{
CurrentlySelectedHole = oHole;
// Most recently selected is used for commands that happen after the mouse is up
MostRecentlySelectedHole = oHole;
CurrentlySelectedHandleType = eHandleType.EdgeHandle;
CurrentlySelectedPolygonEdgeIndex = i;
// The most recently used is for commands that happen after the mouse is up
MostRecentlySelectedPolygonEdgeIndex = i;
return(true);
}
}
/*
* See if this is the move handle at the center of the polygon
*/
PointF pCenter = PolygonCenter(oPolygon);
dx = pCenter.X / CurrentZoom;
dy = pCenter.Y / CurrentZoom;
pCenter = new PointF(ScreenOffset.X + dx, ScreenOffset.Y + dy);
if (IsHitOnTarget(ScreenMouseX, ScreenMouseY, pCenter))
{
CurrentlySelectedHole = oHole;
// Most recently selected is used for commands that happen after the mouse is up
MostRecentlySelectedHole = oHole;
CurrentlySelectedHandleType = eHandleType.MoveHandle;
return(true);
}
return(false);
}
