public override void OnSetAction()
{
base.TitleId = "Constr.BSpline";
base.ActiveObject = bSpline;
BooleanInput bi = new BooleanInput("Constr.BSpline.Mode", "Constr.BSpline.Mode.Values");
// bi Anzeige: open ist true!
bi.GetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.GetBooleanDelegate(OnGetClosed);
bi.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(OnSetClosed);
MultiPointInput mi = new MultiPointInput(this);
mi.ResourceId = "Constr.BSpline.Points";
base.SetInput(mi, bi);
base.ShowAttributes = true;
base.OnSetAction();
}
public override void OnSetAction()
{ // wird beim Start der Aktion aufgerufen
// hier wird der Inhalt des ControlCenters zusammengesetzt und bestimmt, welche Eingaben für diese Aktion
// notwendig sind.
base.ActiveObject = block;
base.TitleId = "SnapObjects";
copyObject = ConstrDefaults.DefaultCopyObjects;
feedBackLine = Line.Construct(); // Feedback während eine Verbindung zwischen Quellpunkt und Zielpunkt hergestellt wird
Color backColor = base.Frame.GetColorSetting("Colors.Feedback", Color.DarkGray);
feedBackLine.ColorDef = new ColorDef("", backColor);
base.FeedBack.Add(feedBackLine);
base.SetCursor(SnapPointFinder.DidSnapModes.DidNotSnap, "ScaleSnap");
// Punktepaare
srcP1 = new GeoPointInput("SnapObjects.Source1");
srcP1.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetSourcePoint1);
srcP1.MouseClickEvent += new MouseClickDelegate(SourcePoint1OnMouseClick);
dstP1 = new GeoPointInput("SnapObjects.Destination1");
dstP1.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDestPoint1);
srcP2 = new GeoPointInput("SnapObjects.Source2");
srcP2.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetSourcePoint2);
srcP2.MouseClickEvent += new MouseClickDelegate(SourcePoint2OnMouseClick);
dstP2 = new GeoPointInput("SnapObjects.Destination2");
dstP2.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDestPoint2);
srcP3 = new GeoPointInput("SnapObjects.Source3");
srcP3.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetSourcePoint3);
srcP3.MouseClickEvent += new MouseClickDelegate(SourcePoint3OnMouseClick);
dstP3 = new GeoPointInput("SnapObjects.Destination3");
dstP3.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDestPoint3);
// Verzerrung
BooleanInput distort = new BooleanInput("ScaleObjects.Distort", "ScaleObjects.Distort.Values");
distort.DefaultBoolean = ConstrDefaults.DefaultScaleDistort;
distort.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetDistort);
// Kopie
BooleanInput copy = new BooleanInput("Modify.CopyObjects", "YesNo.Values");
copy.DefaultBoolean = ConstrDefaults.DefaultCopyObjects;
copy.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetCopy);
// die Eingabeobjekte festlegen
base.SetInput(srcP1, dstP1, srcP2, dstP2, distort, srcP3, dstP3, copy);
// wichtig: Basisimplementierung aufrufen
base.OnSetAction();
}
public override void OnSetAction()
{
base.ActiveObject = block;
base.TitleId = "ReflectObjects";
copyObject = ConstrDefaults.DefaultCopyObjects;
GeoPointInput reflectPoint = new GeoPointInput("ReflectObjects.Point");
// reflectPoint.GetGeoPointEvent += new GeoPointInput.GetGeoPointDelegate(GetReflectPoint);
reflectPoint.SetGeoPointEvent += new GeoPointInput.SetGeoPointDelegate(SetReflectPoint);
reflectPoint.Optional = true;
reflectLine = new CurveInput("ReflectObjects.Line");
reflectLine.Decomposed = true; // nur Einzelelemente, auch bei Polyline und Pfad
reflectLine.MouseOverCurvesEvent += new CurveInput.MouseOverCurvesDelegate(ReflectLine);
reflectLine.CurveSelectionChangedEvent += new CurveInput.CurveSelectionChangedDelegate(ReflectLineChanged);
PlaneInput reflectPlane = new PlaneInput("ReflectObjects.Plane");
reflectPlane.SetPlaneEvent += new PlaneInput.SetPlaneDelegate(SetReflectPlane);
// reflectPlane.GetPlaneEvent += new PlaneInput.GetPlaneDelegate(GetReflectPlane);
reflectPlane.Optional = true;
BooleanInput copy = new BooleanInput("Modify.CopyObjects", "YesNo.Values");
copy.DefaultBoolean = ConstrDefaults.DefaultCopyObjects;
copy.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetCopy);
base.SetInput(reflectPoint, reflectLine, reflectPlane, copy);
BoundingCube result = BoundingCube.EmptyBoundingCube;
foreach (IGeoObject go in originals)
{
result.MinMax(go.GetBoundingCube());
}
GeoPoint blockCenter = result.GetCenter();
block.RefPoint = blockCenter;
base.BasePoint = blockCenter;
reflectModOp = ModOp.ReflectPlane(new Plane(base.BasePoint, base.ActiveDrawingPlane.Normal, base.ActiveDrawingPlane.DirectionY));
reflectModOpStart = reflectModOp;
block.Modify(reflectModOp);
base.OnSetAction();
}
public override void OnSetAction()
{
line = Line.Construct();
lineLength = ConstrDefaults.DefaultLineLength;
lineDir = ConstrDefaults.DefaultLineDirection;
linePositionMiddle = ConstrDefaults.DefaultLinePosition;
startPoint = new GeoPoint(0.0, 0.0, 0.0);
endPoint = startPoint + lineLength * lineDir;
line.SetTwoPoints(startPoint, endPoint);
base.ActiveObject = line;
tangCurves = new ICurve[0];
base.TitleId = "Constr.Line.TangentAngle";
curveInput = new CurveInput("Constr.Line.Tangent.Object");
curveInput.Decomposed = true; // nur Einzelelemente, auch bei Polyline und Pfad
curveInput.MouseOverCurvesEvent += new CADability.Actions.ConstructAction.CurveInput.MouseOverCurvesDelegate(inputTangCurves);
curveInput.CurveSelectionChangedEvent += new CADability.Actions.ConstructAction.CurveInput.CurveSelectionChangedDelegate(inputTangCurvesChanged);
LengthInput len = new LengthInput("Line.Length");
len.DefaultLength = ConstrDefaults.DefaultLineLength;
len.SetLengthEvent += new ConstructAction.LengthInput.SetLengthDelegate(OnSetLength);
len.CalculateLengthEvent += new LengthInput.CalculateLengthDelegate(CalculateLength);
len.ForwardMouseInputTo = curveInput;
GeoVectorInput dir = new GeoVectorInput("Line.Direction");
dir.DefaultGeoVector = ConstrDefaults.DefaultLineDirection;
dir.SetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.SetGeoVectorDelegate(SetGeoVector);
dir.IsAngle = true;
dir.ForwardMouseInputTo = curveInput;
BooleanInput position = new BooleanInput("Constr.Line.Tangent.Position", "Constr.Line.Tangent.Position.Values");
position.DefaultBoolean = ConstrDefaults.DefaultLinePosition;
position.SetBooleanEvent += new BooleanInput.SetBooleanDelegate(SetPosition);
// position.GetBooleanEvent += new BooleanInput.GetBooleanDelegate(GetPosition);
base.SetInput(curveInput, len, dir, position);
base.ShowAttributes = true;
base.OnSetAction();
}
public override void OnSetAction()
{
Boolean useRadius = Frame.GetBooleanSetting("Formatting.Radius", true);
arc = Ellipse.Construct();
double dir;
if (ConstrDefaults.DefaultArcDirection)
{
dir = 1.5 * Math.PI;
}
else
{
dir = -1.5 * Math.PI;
}
arc.SetArcPlaneCenterRadiusAngles(base.ActiveDrawingPlane, ConstrDefaults.DefaultStartPoint, ConstrDefaults.DefaultArcRadius, 0.0, dir);
base.ActiveObject = arc;
base.TitleId = "Constr.Arc.CenterRadius";
gPoint1 = ActionFeedBack.FeedbackPoint(base.Frame);
base.FeedBack.Add(gPoint1);
centerInput = new GeoPointInput("Constr.Arc.Center");
centerInput.DefaultGeoPoint = ConstrDefaults.DefaultArcCenter;
centerInput.DefinesBasePoint = true;
centerInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(Center);
radInput = new LengthInput("Constr.Arc.Radius");
radInput.SetLengthEvent += new ConstructAction.LengthInput.SetLengthDelegate(SetArcRadius);
radInput.GetLengthEvent += new ConstructAction.LengthInput.GetLengthDelegate(GetArcRadius);
if (!useRadius)
{
radInput.Optional = true;
}
radInput.DefaultLength = ConstrDefaults.DefaultArcRadius;
radInput.ForwardMouseInputTo = centerInput;
diamInput = new LengthInput("Constr.Arc.Diameter");
diamInput.SetLengthEvent += new ConstructAction.LengthInput.SetLengthDelegate(SetArcDiameter);
diamInput.GetLengthEvent += new ConstructAction.LengthInput.GetLengthDelegate(GetArcDiameter);
diamInput.CalculateLengthEvent += new LengthInput.CalculateLengthDelegate(CalculateDiameter);
if (useRadius)
{
diamInput.Optional = true;
}
diamInput.DefaultLength = ConstrDefaults.DefaultArcDiameter;
diamInput.ForwardMouseInputTo = centerInput;
startDirInput = new GeoVectorInput("Constr.Arc.CenterRadius.StartAngle");
startDirInput.SetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.SetGeoVectorDelegate(StartDir);
startDirInput.IsAngle = true;
GeoVectorInput endDirInput = new GeoVectorInput("Constr.Arc.CenterRadius.EndAngle");
endDirInput.GetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.GetGeoVectorDelegate(GetEndDir);
endDirInput.SetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.SetGeoVectorDelegate(EndDir);
endDirInput.IsAngle = true;
BooleanInput dirInput = new BooleanInput("Constr.Arc.Direction", "Constr.Arc.Direction.Values");
dirInput.DefaultBoolean = ConstrDefaults.DefaultArcDirection;
dirInput.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetDirection);
if (useRadius)
{
base.SetInput(centerInput, radInput, diamInput, startDirInput, endDirInput, dirInput);
}
else
{
base.SetInput(centerInput, diamInput, radInput, startDirInput, endDirInput, dirInput);
}
base.ShowAttributes = true;
base.OnSetAction();
}
public override void OnSetAction()
{
ellipse = Ellipse.Construct();
ellipse.Plane = base.ActiveDrawingPlane;
ellipse.Center = ConstrDefaults.DefaultEllipseCenter;
// elliCenter = ellipse.Center;
ellipse.MajorRadius = ConstrDefaults.DefaultEllipseMajorRadius;
// elliPoint1 = elliCenter + ellipse.MajorRadius * base.ActiveDrawingPlane.DirectionX;
ellipse.MinorRadius = ConstrDefaults.DefaultEllipseMinorRadius;
// elliPoint2 = elliCenter + ellipse.MinorRadius * base.ActiveDrawingPlane.DirectionY;
ellipse.StartParameter = 0.0;
if (ConstrDefaults.DefaultArcDirection)
{
ellipse.SweepParameter = 1.5 * Math.PI;
}
else
{
ellipse.SweepParameter = -1.5 * Math.PI;
}
base.ActiveObject = ellipse;
base.TitleId = "Constr.EllipseArc.CenterRadius";
gPoint1 = ActionFeedBack.FeedbackPoint(base.Frame);
base.FeedBack.Add(gPoint1);
GeoPointInput elliCenter = new GeoPointInput("Constr.Ellipse.CenterRadius.Center");
elliCenter.DefaultGeoPoint = ConstrDefaults.DefaultEllipseCenter;
elliCenter.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(Center);
GeoPointInput elliPointInput = new GeoPointInput("Constr.Ellipse.CenterRadius.Point");
elliPointInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(Point1);
GeoPointInput elliPoint2 = new GeoPointInput("Constr.Ellipse.CenterRadius.Point2");
// elliMinRad.DefaultLength = ConstrDefaults.DefaultEllipseMinorRadius;
elliPoint2.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(Point2);
elliPoint2.ForwardMouseInputTo = elliCenter;
LengthInput elliMaxRad = new LengthInput("Constr.Ellipse.CenterRadius.MajorRadius");
elliMaxRad.SetLengthEvent += new CADability.Actions.ConstructAction.LengthInput.SetLengthDelegate(SetMajorRadius);
elliMaxRad.GetLengthEvent += new ConstructAction.LengthInput.GetLengthDelegate(GetMajorRadius);
elliMaxRad.DefaultLength = ConstrDefaults.DefaultEllipseMajorRadius;
elliMaxRad.ForwardMouseInputTo = elliCenter;
elliMaxRad.Optional = true;
elliMinRad = new LengthInput("Constr.Ellipse.CenterRadius.MinorRadius");
elliMinRad.DefaultLength = ConstrDefaults.DefaultEllipseMinorRadius;
elliMinRad.SetLengthEvent += new ConstructAction.LengthInput.SetLengthDelegate(MinorRadius);
elliMinRad.GetLengthEvent += new ConstructAction.LengthInput.GetLengthDelegate(GetMinorRadius);
elliMinRad.ForwardMouseInputTo = elliCenter;
elliMinRad.Optional = true;
GeoVectorInput elliDir = new GeoVectorInput("Constr.Ellipse.CenterRadius.Angle");
elliDir.SetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.SetGeoVectorDelegate(ElliDir);
elliDir.GetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.GetGeoVectorDelegate(GetElliDir);
elliDir.Optional = true;
elliDir.IsAngle = true;
GeoVectorInput startDir = new GeoVectorInput("Constr.EllipseArc.StartAngle");
startDir.SetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.SetGeoVectorDelegate(StartDir);
startDir.IsAngle = true;
GeoVectorInput endDir = new GeoVectorInput("Constr.EllipseArc.EndAngle");
endDir.SetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.SetGeoVectorDelegate(EndDir);
endDir.GetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.GetGeoVectorDelegate(GetEndDir);
endDir.IsAngle = true;
BooleanInput dirInput = new BooleanInput("Constr.Arc.Direction", "Constr.Arc.Direction.Values");
dirInput.DefaultBoolean = ConstrDefaults.DefaultArcDirection;
dirInput.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetDirection);
base.SetInput(elliCenter, elliPointInput, elliPoint2, startDir, endDir, elliMaxRad, elliMinRad, dirInput);
base.ShowAttributes = true;
base.OnSetAction();
}
public override void OnSetAction()
{
base.ActiveObject = Face.Construct();
DefaultLength l = new DefaultLength(ConstructAction.DefaultLength.StartValue.ViewWidth8);
if (vector.IsNullVector())
{
vector = l * base.ActiveDrawingPlane.Normal;
}
if (height == 0.0)
{
height = l;
}
;
// if (!VectorOrHeight)
if (extrudeMode < 2)
{
vector = height * base.ActiveDrawingPlane.Normal;
}
base.TitleId = "Constr.Face.PathExtrude";
curveInput = new CurveInput("Constr.Face.PathExtrude.Path");
curveInput.MouseOverCurvesEvent += new CurveInput.MouseOverCurvesDelegate(curveInputPath);
curveInput.CurveSelectionChangedEvent += new CurveInput.CurveSelectionChangedDelegate(curveInputPathChanged);
if (selectedMode)
{
curveInput.Fixed = true;
}
heightInput = new LengthInput("Constr.Face.PathExtrude.Height");
heightInput.SetLengthEvent += new LengthInput.SetLengthDelegate(SetHeight);
heightInput.GetLengthEvent += new LengthInput.GetLengthDelegate(GetHeight);
heightInput.ForwardMouseInputTo = curveInput;
if (selectedMode)
{
extrudeOrg(); //schonmal berechnen und markieren!
}
planeInput = new BooleanInput("Constr.Face.PathExtrude.Plane", "Constr.Face.PathExtrude.Plane.Values", planeMode);
planeInput.SetBooleanEvent += new BooleanInput.SetBooleanDelegate(SetPlaneMode);
vectorInput = new GeoVectorInput("Constr.Face.PathExtrude.Vector", vector);
vectorInput.SetGeoVectorEvent += new GeoVectorInput.SetGeoVectorDelegate(SetVector);
vectorInput.GetGeoVectorEvent += new GeoVectorInput.GetGeoVectorDelegate(GetVector);
// vectorInput.DefaultGeoVector = ConstrDefaults.DefaultExtrudeDirection;
vectorInput.ForwardMouseInputTo = curveInput;
heightOffsetInput = new LengthInput("Constr.Face.PathExtrude.HeightOffset");
heightOffsetInput.SetLengthEvent += new LengthInput.SetLengthDelegate(SetHeightOffset);
heightOffsetInput.GetLengthEvent += new LengthInput.GetLengthDelegate(GetHeightOffset);
heightOffsetInput.ForwardMouseInputTo = curveInput;
heightOffsetInput.Optional = true;
vectorOffsetInput = new GeoVectorInput("Constr.Face.PathExtrude.VectorOffset", vectorOffset);
vectorOffsetInput.SetGeoVectorEvent += new GeoVectorInput.SetGeoVectorDelegate(SetVectorOffset);
vectorOffsetInput.GetGeoVectorEvent += new GeoVectorInput.GetGeoVectorDelegate(GetVectorOffset);
vectorOffsetInput.ForwardMouseInputTo = curveInput;
vectorOffsetInput.Optional = true;
pipeInput = new CurveInput("Constr.Face.PathExtrude.Pipe");
pipeInput.MouseOverCurvesEvent += new CurveInput.MouseOverCurvesDelegate(pipeInputCurves);
pipeInput.CurveSelectionChangedEvent += new CurveInput.CurveSelectionChangedDelegate(pipeInputCurveChanged);
optionalOrg();
SeparatorInput separatorHeight = new SeparatorInput("Constr.Face.PathExtrude.SeparatorHeight");
SeparatorInput separatorVector = new SeparatorInput("Constr.Face.PathExtrude.SeparatorVector");
SeparatorInput separatorPipe = new SeparatorInput("Constr.Face.PathExtrude.SeparatorPipe");
// if (selectedMode)
// base.SetInput( heightInput, heightOffsetInput, separatorVector, vectorInput, vectorOffsetInput, separatorPipe, pipeInput, planeInput);
// else base.SetInput(curveInput,separatorHeight, heightInput, heightOffsetInput,separatorVector,vectorInput, vectorOffsetInput,separatorPipe,pipeInput, planeInput);
base.SetInput(curveInput, separatorHeight, heightInput, heightOffsetInput, planeInput, separatorVector, vectorInput, vectorOffsetInput, separatorPipe, pipeInput);
base.ShowAttributes = true;
base.OnSetAction();
}
public override void OnSetAction()
{
base.ActiveObject = block;
base.TitleId = "ScaleObjects";
dis = ConstrDefaults.DefaultScaleDistort;
copyObject = ConstrDefaults.DefaultCopyObjects;
feedBackLine = Line.Construct();
Color backColor = base.Frame.GetColorSetting("Colors.Feedback", Color.DarkGray);
feedBackLine.ColorDef = new ColorDef("", backColor);
base.SetCursor(SnapPointFinder.DidSnapModes.DidNotSnap, "Size");
clickandPress = false;
GeoPointInput fixPoint = new GeoPointInput("Objects.FixPoint", base.BasePoint);
fixPoint.Optional = true;
fixPoint.DefinesHotSpot = true;
fixPoint.HotSpotSource = "Hotspots.png:0";
fixPoint.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetfixPoint);
fixPoint.GetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.GetGeoPointDelegate(GetfixPoint);
// dieser Punkt mit dem Fixpunkt dient zur Faktor-Bestimmung, "1" läßt ihn unverändert, "2" verdoppelt seine Entfernung vom Fixpunkt
startPointInput = new GeoPointInput("Objects.StartPoint");
startPointInput.Optional = true;
startPointInput.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetStartPoint);
startPointInput.GetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.GetGeoPointDelegate(GetStartPoint);
endPointInput = new GeoPointInput("Objects.EndPoint");
endPointInput.Optional = true;
endPointInput.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetEndPoint);
endPointInput.GetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.GetGeoPointDelegate(GetEndPoint);
fac = new DoubleInput("ScaleObjects.Factor", faktor);
fac.ReadOnly = dis;
fac.Optional = dis;
fac.SetDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.SetDoubleDelegate(SetFactor);
fac.GetDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.GetDoubleDelegate(GetFactor);
fac.CalculateDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.CalculateDoubleDelegate(CalculateFactor);
fac.MouseClickEvent += new MouseClickDelegate(facOnMouseClick);
// Verzerrung
BooleanInput distort = new BooleanInput("ScaleObjects.Distort", "ScaleObjects.Distort.Values");
distort.DefaultBoolean = ConstrDefaults.DefaultScaleDistort;
distort.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetDistort);
fac1 = new DoubleInput("ScaleObjects.FactorX");
fac1.ReadOnly = !dis;
fac1.Optional = !dis;
fac1.SetDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.SetDoubleDelegate(SetFactor1);
fac1.GetDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.GetDoubleDelegate(GetFactor1);
fac1.CalculateDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.CalculateDoubleDelegate(CalculateFactor);
fac1.MouseClickEvent += new MouseClickDelegate(facOnMouseClick);
fac2 = new DoubleInput("ScaleObjects.FactorY");
fac2.ReadOnly = !dis;
fac2.Optional = !dis;
// fac2.Optional = true;
fac2.SetDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.SetDoubleDelegate(SetFactor2);
fac2.GetDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.GetDoubleDelegate(GetFactor2);
fac2.CalculateDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.CalculateDoubleDelegate(CalculateFactor2);
fac3 = new DoubleInput("ScaleObjects.FactorZ");
fac3.ReadOnly = !dis;
fac3.Optional = !dis;
// fac2.Optional = true;
fac3.SetDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.SetDoubleDelegate(SetFactor3);
fac3.GetDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.GetDoubleDelegate(GetFactor3);
fac3.CalculateDoubleEvent += new CADability.Actions.ConstructAction.DoubleInput.CalculateDoubleDelegate(CalculateFactor3);
BooleanInput copy = new BooleanInput("Modify.CopyObjects", "YesNo.Values");
copy.DefaultBoolean = ConstrDefaults.DefaultCopyObjects;
copy.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetCopy);
// erstmal wird das umgebende Rechteck bestimmt
cube = BoundingCube.EmptyBoundingCube;
foreach (IGeoObject go in originals)
{
cube.MinMax(go.GetBoundingCube());
}
GeoPoint blockCenter = cube.GetCenter();
block.RefPoint = blockCenter;
// im Basepoint steht der Fixpunkt der Skalierung
base.BasePoint = blockCenter;
base.SetInput(fixPoint, fac, startPointInput, endPointInput, distort, fac1, fac2, fac3, copy);
base.OnSetAction();
}
public override void OnSetAction()
{
dim = Dimension.Construct();
if (dimLabelType == DimLabelType.Point)
{
idString = "Constr.Dimension.Point";
pointString = "Constr.Dimension.Point.Point";
objectString = "Constr.Dimension.Point.Object";
locationString = "Constr.Dimension.Location";
dim.DimType = Dimension.EDimType.DimLocation;
}
else
{
idString = "Constr.Dimension.Labeling";
pointString = "Constr.Dimension.Labeling.Point";
objectString = "Constr.Dimension.Labeling.Object";
locationString = "Constr.Dimension.Labeling.Location";
dim.DimType = Dimension.EDimType.DimLocation;
}
dim.DimLineRef = ConstrDefaults.DefaultDimPoint;
dim.Normal = base.ActiveDrawingPlane.Normal;
dim.AddPoint(new GeoPoint(0.0, 0.0, 0.0));
dimMethodPoint = ConstrDefaults.DefaultDimensionPointMethod;
base.TitleId = idString;
base.ActiveObject = dim;
base.ShowActiveObject = false;
curveInput = new CurveInput(objectString);
curveInput.Decomposed = true; // nur Einzelelemente, auch bei Polyline und Pfad
curveInput.ReadOnly = !dimMethodPoint;
curveInput.Optional = !dimMethodPoint;
curveInput.MouseOverCurvesEvent += new CADability.Actions.ConstructAction.CurveInput.MouseOverCurvesDelegate(inputDimCurves);
curveInput.CurveSelectionChangedEvent += new CADability.Actions.ConstructAction.CurveInput.CurveSelectionChangedDelegate(inputDimCurvesChanged);
dimPointInput = new GeoPointInput(pointString);
dimPointInput.ReadOnly = dimMethodPoint;
dimPointInput.Optional = dimMethodPoint;
dimPointInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimPoint);
dimLocationInput = new GeoPointInput(locationString);
dimLocationInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimLocation);
dimLocationInput.MouseClickEvent += new MouseClickDelegate(DimLocationOnMouseClick);
dimStringInput = new StringInput("Constr.Dimension.Labeling.Point.Text");
dimStringInput.SetStringEvent += new CADability.Actions.ConstructAction.StringInput.SetStringDelegate(SetDimString);
dimStringInput.GetStringEvent += new CADability.Actions.ConstructAction.StringInput.GetStringDelegate(GetDimString);
dimMethod = new BooleanInput("Constr.Dimension.Point.Method", "Constr.Dimension.Point.Method.Values");
dimMethod.DefaultBoolean = ConstrDefaults.DefaultDimensionPointMethod;
dimMethod.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetMethod);
if (dimLabelType == DimLabelType.Point)
{
base.SetInput(curveInput, dimPointInput, dimLocationInput, dimMethod);
}
else
{
base.SetInput(curveInput, dimPointInput, dimLocationInput, dimStringInput, dimMethod);
}
base.ShowAttributes = true;
base.OnSetAction();
}
/// <summary>
/// Overrides ConstructAction.OnSetAction. Provides the input fields and some initialsation
/// </summary>
public override void OnSetAction()
{
base.TitleId = "Constr.Picture";
widthValue = 1; // default value
heightValue = 1; // default value
keepAspectRatioValue = true;
rectangularValue = true;
// Create and initialize the filename input field
fileNameInput = new StringInput("Picture.Object"); // Resource ID must be defined in StringTable
fileNameInput.IsFileNameInput = true; // to enable the openfile dialog
fileNameInput.InitOpenFile = true;
fileNameInput.FileNameFilter = StringTable.GetString("Picture.Open.Filter");
// you may also wnat to set fileNameInput.FileNameFilter
fileNameInput.GetStringEvent += new StringInput.GetStringDelegate(OnGetFileName);
fileNameInput.SetStringEvent += new StringInput.SetStringDelegate(OnSetFileName);
fileName = ""; // initial filename is empty
// Create and initialize the position input field
positionInput = new GeoPointInput("Picture.Location"); // Resource ID must be defined in StringTable
positionInput.GetGeoPointEvent += new GeoPointInput.GetGeoPointDelegate(OnGetPosition);
positionInput.SetGeoPointExEvent += new GeoPointInput.SetGeoPointExDelegate(OnSetPosition);
positionInput.DefinesBasePoint = true;
// Create and initialize the scaling factor input field
scalingFactorInput = new DoubleInput("Picture.Scale"); // Resource ID must be defined in StringTable
scalingFactorInput.GetDoubleEvent += new DoubleInput.GetDoubleDelegate(OnGetScalingFactor);
scalingFactorInput.SetDoubleEvent += new DoubleInput.SetDoubleDelegate(OnSetScalingFactor);
scalingFactorInput.CalculateDoubleEvent += new DoubleInput.CalculateDoubleDelegate(CalculateScalingFactorEvent);
// scalingFactorInput.Optional = true; // optinal input
// scalingFactorInput.ForwardMouseInputTo = positionInput; // no mouse input, forward to position input
scalingFactor = 1.0; // default scaling factor
width = new LengthInput("Picture.Width");
width.GetLengthEvent += new ConstructAction.LengthInput.GetLengthDelegate(OnGetWidth);
width.SetLengthEvent += new ConstructAction.LengthInput.SetLengthDelegate(OnSetWidth);
width.Optional = true; // optinal input
width.ForwardMouseInputTo = positionInput; // no mouse input, forward to position input
height = new LengthInput("Picture.Height");
height.GetLengthEvent += new LengthInput.GetLengthDelegate(OnGetHeight);
height.SetLengthEvent += new LengthInput.SetLengthDelegate(OnSetHeight);
height.Optional = true; // optinal input
height.ForwardMouseInputTo = positionInput; // no mouse input, forward to position input
GeoVectorInput dirWidth = new GeoVectorInput("Picture.DirWidth");
dirWidth.GetGeoVectorEvent += new GeoVectorInput.GetGeoVectorDelegate(OnGetDirWidth);
dirWidth.SetGeoVectorEvent += new GeoVectorInput.SetGeoVectorDelegate(OnSetDirWidth);
dirWidth.Optional = true;
GeoVectorInput dirHeight = new GeoVectorInput("Picture.DirHeight");
dirHeight.GetGeoVectorEvent += new GeoVectorInput.GetGeoVectorDelegate(OnGetDirHeight);
dirHeight.SetGeoVectorEvent += new GeoVectorInput.SetGeoVectorDelegate(OnSetDirHeight);
dirHeight.Optional = true;
BooleanInput keepAspectRatio = new BooleanInput("Picture.KeepAspectRatio", "YesNo.Values", keepAspectRatioValue);
keepAspectRatio.SetBooleanEvent += new ConstructAction.BooleanInput.SetBooleanDelegate(OnKeepAspectRatioChanged);
BooleanInput rectangular = new BooleanInput("Picture.Rectangular", "YesNo.Values", rectangularValue);
rectangular.SetBooleanEvent += new ConstructAction.BooleanInput.SetBooleanDelegate(OnRectangularChanged);
// picture must exist prior to SetInput
// because picture.Location is required by positionInput
picture = Picture.Construct();
// Define the input fields for the ConstructAction
base.SetInput(fileNameInput, positionInput, scalingFactorInput, width, height, dirWidth, dirHeight, keepAspectRatio, rectangular);
base.OnSetAction(); // Default implementation must be called
// force the snapmode to include SnapToFaceSurface
base.Frame.SnapMode |= SnapPointFinder.SnapModes.SnapToFaceSurface;
}
// Update is called once per frame
void Update()
{
if (triggerButton == KeyCode.None)
{
enabled = false;
return;
}
BooleanInput buttonAction = null;
if (triggerButton == (KeyCode)IndexButton.LeftInnerFace)
{
buttonAction = _leftAAction;
}
else if (triggerButton == (KeyCode)IndexButton.RightInnerFace)
{
buttonAction = _rightAAction;
}
else if (triggerButton == (KeyCode)IndexButton.LeftTrackpadPress)
{
buttonAction = _leftTrackpadAction;
}
else if (triggerButton == (KeyCode)IndexButton.RightTrackpadPress)
{
buttonAction = _rightTrackpadAction;
}
else
{
return;
}
if (triggerButton == (KeyCode)ViveButton.LeftTrigger || triggerButton == (KeyCode)ViveButton.RightTrigger)
{
var triggerAction = (triggerButton == (KeyCode)ViveButton.LeftTrigger) ? _leftTriggerAction : _rightTriggerAction;
if (!triggerAction.isActive)
{
return;
}
float triggerValue = triggerAction.value;
Console.WriteLine("triggerValue : " + triggerValue);
if (triggerValue > 0.5f)
{
//GetKeyDown
if (!triggerPressed)
{
Console.WriteLine(triggerAction.name + " is down");
triggerPressed = true;
checkDoubleClick = (Time.time - pressTime <= interval);
pressTime = Time.time;
OnPress();
checkLongClick = true;
checkClick = false;
}
//GetKey
OnHold();
if (checkLongClick && Time.time - pressTime >= longClickInterval)
{
Console.WriteLine(triggerAction.name + " is longClicked");
checkLongClick = false;
OnLongClick();
longClicked = true;
}
}
if (triggerPressed && triggerValue < 0.1f)
{
Console.WriteLine(triggerAction.name + " is up");
//GetKeyUp
triggerPressed = false;
releaseTime = Time.time;
OnRelease();
if (longClicked)
{
OnReleaseAfterLongClick();
longClicked = false;
}
if (releaseTime - pressTime <= interval)
{
if (checkDoubleClick)
{
OnDoubleClick();
}
else
{
checkClick = true;
}
}
}
if (checkClick && Time.time - releaseTime > interval)
{
checkClick = false;
OnClick();
}
}
else
{
if (buttonAction.activeChange)
{
//Console.WriteLine(buttonAction.name + " is pressed");
checkDoubleClick = (Time.time - pressTime <= interval);
pressTime = Time.time;
OnPress();
checkLongClick = true;
checkClick = false;
}
if (buttonAction.state)
{
//Console.WriteLine(buttonAction.name + " is hold");
OnHold();
if (checkLongClick && Time.time - pressTime >= longClickInterval)
{
//Console.WriteLine(buttonAction.name + " is longClicked");
checkLongClick = false;
OnLongClick();
longClicked = true;
}
}
if (buttonAction.inactiveChange)
{
//Console.WriteLine(buttonAction.name + " is up");
releaseTime = Time.time;
OnRelease();
if (longClicked)
{
OnReleaseAfterLongClick();
longClicked = false;
}
//Debug.Log("GetKeyUp : releaseTime - pressTime = " + (releaseTime - pressTime));
if (releaseTime - pressTime <= interval)
{
if (checkDoubleClick)
{
OnDoubleClick();
}
else
{
checkClick = true;
}
}
}
if (checkClick && Time.time - releaseTime > interval)
{
checkClick = false;
OnClick();
}
}
}
public override void OnSetAction()
{
arc = Ellipse.Construct();
arcCenter = new GeoPoint(0.0, 0.0, 0.0);
arcRad = base.WorldViewSize / 20;
startAng = 0.0;
arcDir = ConstrDefaults.DefaultArcDirection;
if (arcDir)
{
endAng = 1.5 * Math.PI;
}
else
{
endAng = -1.5 * Math.PI;
}
arcPlane = base.ActiveDrawingPlane;
arc.SetArcPlaneCenterRadiusAngles(arcPlane, arcCenter, arcRad, startAng, endAng);
gPoint1 = ActionFeedBack.FeedbackPoint(base.Frame);
base.FeedBack.Add(gPoint1);
base.ActiveObject = arc;
base.TitleId = "Constr.Arc.CenterStartEnd";
arcCenterInput = new GeoPointInput("Constr.Arc.Center");
arcCenterInput.DefaultGeoPoint = ConstrDefaults.DefaultArcCenter;
arcCenterInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(Center);
arcStartPointInput = new GeoPointInput("Constr.Arc.StartPoint");
arcStartPointInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(StartPoint);
arcEndPointInput = new GeoPointInput("Constr.Arc.EndPoint");
arcEndPointInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(EndPoint);
BooleanInput dirInput = new BooleanInput("Constr.Arc.Direction", "Constr.Arc.Direction.Values");
dirInput.DefaultBoolean = ConstrDefaults.DefaultArcDirection;
dirInput.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetDirection);
LengthInput arcRadius = new LengthInput("Constr.Arc.Radius");
arcRadius.GetLengthEvent += new ConstructAction.LengthInput.GetLengthDelegate(ArcRadius);
arcRadius.Optional = true;
arcRadius.ReadOnly = true;
/*
* GeoVectorInput startDir = new GeoVectorInput("Constr.Arc.CenterRadius.StartAngle");
* startDir.Optional = true;
* startDir.ReadOnly = true;
* startDir.OnGetGeoVector +=new Condor.Actions.ConstructAction.GeoVectorInput.GetGeoVector(StartDir);
*
* GeoVectorInput endDir = new GeoVectorInput("Constr.Arc.CenterRadius.EndAngle");
* endDir.Optional = true;
* endDir.ReadOnly = true;
* endDir.OnGetGeoVector +=new Condor.Actions.ConstructAction.GeoVectorInput.GetGeoVector(EndDir);
* base.SetInput(arcCenterInput,arcStartPointInput,arcEndPointInput,dirInput,arcRadius,startDir,endDir);
*/
base.SetInput(arcCenterInput, arcStartPointInput, arcEndPointInput, dirInput, arcRadius);
base.ShowAttributes = true;
base.OnSetAction();
}
/// <summary>
/// Overrides ConstructAction.OnSetAction. Provides the input fields and some initialsation
/// </summary>
public override void OnSetAction()
{
base.TitleId = "Constr.Picture.RefPointWidthHeight";
widthValue = 1; // default value
heightValue = 1; // default value
keepAspectRatioValue = true;
rectangularValue = true;
isOnPlane = false;
// Create and initialize the filename input field
fileNameInput = new StringInput("Picture.Object"); // Resource ID must be defined in StringTable
fileNameInput.IsFileNameInput = true; // to enable the openfile dialog
fileNameInput.InitOpenFile = true;
fileNameInput.FileNameFilter = StringTable.GetString("Picture.Open.Filter");
// you may also wnat to set fileNameInput.FileNameFilter
fileNameInput.GetStringEvent += new StringInput.GetStringDelegate(OnGetFileName);
fileNameInput.SetStringEvent += new StringInput.SetStringDelegate(OnSetFileName);
fileName = ""; // initial filename is empty
// Create and initialize the position input field
positionInput = new GeoPointInput("Picture.Location"); // Resource ID must be defined in StringTable
positionInput.GetGeoPointEvent += new GeoPointInput.GetGeoPointDelegate(OnGetPosition);
positionInput.SetGeoPointExEvent += new GeoPointInput.SetGeoPointExDelegate(OnSetPosition);
positionInput.DefinesBasePoint = true;
width = new LengthInput("Picture.Width");
width.GetLengthEvent += new ConstructAction.LengthInput.GetLengthDelegate(OnGetWidth);
width.SetLengthEvent += new ConstructAction.LengthInput.SetLengthDelegate(OnSetWidth);
//width.Optional = true; // optinal input
//width.ReadOnly = true;
// width.ForwardMouseInputTo = positionInput; // no mouse input, forward to position input
height = new LengthInput("Picture.Height");
height.GetLengthEvent += new LengthInput.GetLengthDelegate(OnGetHeight);
height.Optional = true; // optinal input
//height.ReadOnly = true;
height.SetLengthEvent += new LengthInput.SetLengthDelegate(OnSetHeight);
height.CalculateLengthEvent += new LengthInput.CalculateLengthDelegate(height_CalculateLengthEvent);
// height.ForwardMouseInputTo = positionInput; // no mouse input, forward to position input
// the input is the direction
GeoVectorInput dir = new GeoVectorInput("Picture.Direction");
// dir.DefaultGeoVector = ConstrDefaults.DefaultLineDirection;
dir.SetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.SetGeoVectorDelegate(SetAngle);
dir.GetGeoVectorEvent += new GeoVectorInput.GetGeoVectorDelegate(GetAngle);
dir.IsAngle = true;
dir.Optional = true;
// during angle-input the mouseinput goes to startPointInput, if it isn´t fixed
dir.ForwardMouseInputTo = positionInput;
BooleanInput keepAspectRatio = new BooleanInput("Picture.KeepAspectRatio", "YesNo.Values", keepAspectRatioValue);
keepAspectRatio.SetBooleanEvent += new ConstructAction.BooleanInput.SetBooleanDelegate(OnKeepAspectRatioChanged);
BooleanInput rectangular = new BooleanInput("Picture.Rectangular", "YesNo.Values", rectangularValue);
rectangular.SetBooleanEvent += new ConstructAction.BooleanInput.SetBooleanDelegate(OnRectangularChanged);
// picture must exist prior to SetInput
// because picture.Location is required by positionInput
picture = Picture.Construct();
// Define the input fields for the ConstructAction
base.SetInput(fileNameInput, positionInput, width, height, dir, keepAspectRatio, rectangular);
base.OnSetAction(); // Default implementation must be called
// force the snapmode to include SnapToFaceSurface
// base.Frame.SnapMode |= SnapPointFinder.SnapModes.SnapToFaceSurface;
}
public override void OnSetAction()
{
// base.ActiveObject = block;
base.TitleId = "RotateObjects";
copyObject = ConstrDefaults.DefaultCopyObjects;
axisVector = base.ActiveDrawingPlane.Normal;
feedBackEllipse = Ellipse.Construct();
feedBackEllipse.SetEllipseCenterAxis(GeoPoint.Origin, GeoVector.XAxis, GeoVector.YAxis); // damit nicht alles 0
Color backColor = base.Frame.GetColorSetting("Colors.Feedback", Color.DarkGray);
feedBackEllipse.ColorDef = new ColorDef("", backColor);
base.FeedBack.Add(feedBackEllipse);
base.SetCursor(SnapPointFinder.DidSnapModes.DidNotSnap, "RotateSmall");
//--> diese Inputs werden gebraucht
GeoPointInput refPointInput = new GeoPointInput("Objects.RefPoint");
refPointInput.Optional = true;
refPointInput.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetRefPoint);
refPointInput.GetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.GetGeoPointDelegate(GetRefPoint);
refPointInput.DefinesHotSpot = true;
refPointInput.HotSpotSource = "Hotspots.png:0";
rotAngleInput = new AngleInput("RotateObjects.Angle");
rotAngleInput.SetAngleEvent += new CADability.Actions.ConstructAction.AngleInput.SetAngleDelegate(OnSetRotationAngle);
rotAngleInput.GetAngleEvent += new CADability.Actions.ConstructAction.AngleInput.GetAngleDelegate(OnGetRotationAngle);
rotAngleInput.CalculateAngleEvent += new CADability.Actions.ConstructAction.AngleInput.CalculateAngleDelegate(OnCalculateRotationAngle);
rotAngleInput.MouseClickEvent += new MouseClickDelegate(OnMouseClickRotationAngle);
startPointInput = new GeoPointInput("Objects.StartPoint");
startPointInput.Optional = true;
startPointInput.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(OnSetStartPoint);
startPointInput.GetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.GetGeoPointDelegate(OnGetStartPoint);
endPointInput = new GeoPointInput("Objects.EndPoint");
endPointInput.Optional = true;
endPointInput.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(OnSetEndPoint);
endPointInput.GetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.GetGeoPointDelegate(OnGetEndPoint);
rotateLineInput = new CurveInput("Constr.Rotate.AxisLine");
rotateLineInput.Decomposed = true; // nur Einzelelemente, auch bei Polyline und Pfad
rotateLineInput.MouseOverCurvesEvent += new CurveInput.MouseOverCurvesDelegate(RotateLine);
rotateLineInput.CurveSelectionChangedEvent += new CurveInput.CurveSelectionChangedDelegate(RotateLineChanged);
rotateLineInput.Optional = true;
srcPlane = new PlaneInput("Constr.Rotate.SourcePlane");
srcPlane.SetPlaneEvent += SrcPlane_OnSetPlane;
srcPlane.GetPlaneEvent += SrcPlane_OnGetPlane;
srcPlane.Optional = true;
trgPlane = new PlaneInput("Constr.Rotate.TargetPlane");
trgPlane.SetPlaneEvent += TrgPlane_OnSetPlane;
trgPlane.GetPlaneEvent += TrgPlane_OnGetPlane;
trgPlane.Optional = true;
offset = new MultipleChoiceInput("Constr.Rotate.Offset", "Constr.Rotate.Offset.Values");
offset.Optional = true;
offsetVal = 0;
offset.GetChoiceEvent += OnGetOffset;
offset.SetChoiceEvent += OnSetOffset;
BooleanInput copy = new BooleanInput("Modify.CopyObjects", "YesNo.Values");
copy.DefaultBoolean = ConstrDefaults.DefaultCopyObjects;
copy.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetCopy);
base.SetInput(refPointInput, rotAngleInput, startPointInput, endPointInput, rotateLineInput, srcPlane, trgPlane, offset, copy);
BoundingCube result = BoundingCube.EmptyBoundingCube;
foreach (IGeoObject go in originals)
{
result.MinMax(go.GetBoundingCube());
}
GeoPoint blockCenter = result.GetCenter();
block.RefPoint = blockCenter;
refPoint = blockCenter;
base.BasePoint = blockCenter; // für die Winkelberechnung
base.OnSetAction();
rotateLineInput.SetContextMenu("MenuId.Axis", this); // kann man erst hier machen, zuvor gibts die Property noch nicht
}
/// <summary>
/// Overrides <see cref="CADability.Actions.ConstructAction.OnSetAction ()"/>
/// </summary>
public override void OnSetAction()
{
base.ActiveObject = Face.Construct();
DefaultLength l = new DefaultLength(ConstructAction.DefaultLength.StartValue.ViewWidth8);
if (vector.IsNullVector())
{
vector = l * base.ActiveDrawingPlane.Normal;
}
if (height == 0.0)
{
height = l;
}
;
// if (!VectorOrHeight)
if (extrudeMode < 2)
{
vector = height * base.ActiveDrawingPlane.Normal;
}
base.TitleId = "Constr.Solid.FaceExtrude";
geoObjectInput = new GeoObjectInput("Constr.Solid.FaceExtrude.Path");
geoObjectInput.MouseOverGeoObjectsEvent += new GeoObjectInput.MouseOverGeoObjectsDelegate(geoObjectInputFace);
geoObjectInput.GeoObjectSelectionChangedEvent += new GeoObjectInput.GeoObjectSelectionChangedDelegate(geoObjectInputFaceChanged);
if (selectedMode)
{
geoObjectInput.Fixed = true; // schon fertig, da Werte reingekommen sind
}
//geoObjectInput.MultipleInput = true;
//geoObjectInput.Optional = true;
innerPointInput = new GeoPointInput("Constr.Solid.FaceExtrude.InnerPoint");
innerPointInput.SetGeoPointEvent += new GeoPointInput.SetGeoPointDelegate(SetInnerPointInput);
innerPointInput.MouseClickEvent += new MouseClickDelegate(innerPointInputMouseClickEvent);
innerPointInput.Optional = true;
heightInput = new LengthInput("Constr.Face.PathExtrude.Height");
heightInput.SetLengthEvent += new LengthInput.SetLengthDelegate(SetHeight);
heightInput.GetLengthEvent += new LengthInput.GetLengthDelegate(GetHeight);
heightInput.CalculateLengthEvent += new LengthInput.CalculateLengthDelegate(CalculateHeight);
heightInput.ForwardMouseInputTo = geoObjectInput;
planeInput = new BooleanInput("Constr.Face.PathExtrude.Plane", "Constr.Face.PathExtrude.Plane.Values", planeMode);
planeInput.SetBooleanEvent += new BooleanInput.SetBooleanDelegate(SetPlaneMode);
vectorInput = new GeoVectorInput("Constr.Face.PathExtrude.Vector", vector);
vectorInput.SetGeoVectorEvent += new GeoVectorInput.SetGeoVectorDelegate(SetVector);
vectorInput.GetGeoVectorEvent += new GeoVectorInput.GetGeoVectorDelegate(GetVector);
// vectorInput.DefaultGeoVector = ConstrDefaults.DefaultExtrudeDirection;
vectorInput.ForwardMouseInputTo = geoObjectInput;
heightOffsetInput = new LengthInput("Constr.Face.PathExtrude.HeightOffset");
heightOffsetInput.SetLengthEvent += new LengthInput.SetLengthDelegate(SetHeightOffset);
heightOffsetInput.GetLengthEvent += new LengthInput.GetLengthDelegate(GetHeightOffset);
heightOffsetInput.ForwardMouseInputTo = geoObjectInput;
heightOffsetInput.Optional = true;
vectorOffsetInput = new GeoVectorInput("Constr.Face.PathExtrude.VectorOffset", vectorOffset);
vectorOffsetInput.SetGeoVectorEvent += new GeoVectorInput.SetGeoVectorDelegate(SetVectorOffset);
vectorOffsetInput.GetGeoVectorEvent += new GeoVectorInput.GetGeoVectorDelegate(GetVectorOffset);
vectorOffsetInput.ForwardMouseInputTo = geoObjectInput;
vectorOffsetInput.Optional = true;
pipeInput = new CurveInput("Constr.Face.PathExtrude.Pipe");
pipeInput.MouseOverCurvesEvent += new CurveInput.MouseOverCurvesDelegate(pipeInputCurves);
pipeInput.CurveSelectionChangedEvent += new CurveInput.CurveSelectionChangedDelegate(pipeInputCurveChanged);
optionalOrg();
MultipleChoiceInput insertMode = new MultipleChoiceInput("Constr.Solid.SolidInsertMode", "Constr.Solid.SolidInsertMode.Values");
insertMode.GetChoiceEvent += new MultipleChoiceInput.GetChoiceDelegate(GetInsertMode);
insertMode.SetChoiceEvent += new CADability.Actions.ConstructAction.MultipleChoiceInput.SetChoiceDelegate(SetInsertMode);
SeparatorInput separatorHeight = new SeparatorInput("Constr.Face.PathExtrude.SeparatorHeight");
SeparatorInput separatorVector = new SeparatorInput("Constr.Face.PathExtrude.SeparatorVector");
SeparatorInput separatorPipe = new SeparatorInput("Constr.Face.PathExtrude.SeparatorPipe");
SeparatorInput separatorInsert = new SeparatorInput("Constr.Face.PathExtrude.SeparatorInsert");
base.SetInput(geoObjectInput, innerPointInput, separatorHeight, heightInput, heightOffsetInput, planeInput, separatorVector, vectorInput, vectorOffsetInput, separatorPipe, pipeInput, separatorInsert, insertMode);
base.ShowAttributes = true;
base.ShowActiveObject = false;
base.OnSetAction();
if (selectedMode)
{
extrudeOrg(); //schonmal berechnen und markieren!
}
}