private Feature GetUpdatedCutList()
{
Feature swFeat = (Feature)swMainModel.FirstFeature();
while (swFeat != null)
{
if (swFeat.GetTypeName2() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = swFeat.GetSpecificFeature2();
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.SetAutomaticUpdate(true);
Feature cutList = swFeat.GetFirstSubFeature();
while (cutList != null)
{
if (cutList.GetTypeName2() == "CutListFolder")
{
return(cutList);
}
cutList = cutList.GetNextSubFeature();
}
return(null);
}
swFeat = swFeat.GetNextFeature();
}
return(null);
}
public void AjouterDossier(BodyFolder dossier, Component2 comp)
{
Body2 corps = dossier.ePremierCorps();
if (corps.IsNull())
{
return;
}
String BaseMateriau;
String Materiau = corps.eGetMateriauCorpsOuComp(comp, out BaseMateriau);
string Profil;
if (corps.eTypeDeCorps() == eTypeCorps.Tole)
{
Double Ep = corps.eEpaisseurCorpsOuDossier(dossier);
if (Ep == -1)
{
WindowLog.EcrireF("Pb d'epaisseur sur le corps {0}", corps.Name);
return;
}
Profil = "Ep " + Ep.ToString();
}
else if (dossier.ePropExiste(CONSTANTES.PROFIL_NOM))
{
Profil = dossier.eProp(CONSTANTES.PROFIL_NOM);
}
else
{
Profil = NomVolume;
}
Ajouter(BaseMateriau, Materiau, Profil, dossier, comp);
}
private void Ajouter(String repere, BodyFolder dossier, Component2 cp)
{
List <Element> listElements = new List <Element>();
if (Dic.ContainsKey(repere))
{
listElements = Dic[repere];
}
else
{
Dic.Add(repere, listElements);
}
foreach (var corps in dossier.eListeDesCorps())
{
listElements.Add(new Element(corps, cp));
}
}
static string GetFromCutlist(IModelDoc2 swModel, string property)
{
var propertyValue = "";
try
{
Feature swFeat2 = swModel.FirstFeature();
while (swFeat2 != null)
{
if (swFeat2.GetTypeName2() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = swFeat2.GetSpecificFeature2();
swFeat2.Select2(false, -1);
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.UpdateCutList();
Feature swSubFeat = swFeat2.GetFirstSubFeature();
while (swSubFeat != null)
{
if (swSubFeat.GetTypeName2() == "CutListFolder")
{
BodyFolder bodyFolder = swSubFeat.GetSpecificFeature2();
swSubFeat.Select2(false, -1);
bodyFolder.SetAutomaticCutList(true);
bodyFolder.UpdateCutList();
var swCustPrpMgr = swSubFeat.CustomPropertyManager;
//swCustPrpMgr.Add("Площадь поверхности", "Текст", "\"SW-SurfaceArea@@@Элемент списка вырезов1@ВНС-901.81.002.SLDPRT\"");
string valOut;
swCustPrpMgr.Get4(property, true, out valOut, out propertyValue);
}
swSubFeat = swSubFeat.GetNextFeature();
}
}
swFeat2 = swFeat2.GetNextFeature();
}
}
catch (Exception exception)
{
MessageBox.Show(exception.ToString());
}
return(propertyValue);
}
static string GetFromCutlist(IModelDoc2 swModel, string property)
{
string propertyValue = null;
try
{
Feature swFeat2 = swModel.FirstFeature();
while (swFeat2 != null)
{
if (swFeat2.GetTypeName2() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = swFeat2.GetSpecificFeature2();
swFeat2.Select2(false, -1);
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.UpdateCutList();
Feature swSubFeat = swFeat2.GetFirstSubFeature();
while (swSubFeat != null)
{
if (swSubFeat.GetTypeName2() == "CutListFolder")
{
BodyFolder bodyFolder = swSubFeat.GetSpecificFeature2();
swSubFeat.Select2(false, -1);
bodyFolder.SetAutomaticCutList(true);
bodyFolder.UpdateCutList();
var swCustPrpMgr = swSubFeat.CustomPropertyManager;
string valOut;
swCustPrpMgr.Get4(property, true, out valOut, out propertyValue);
}
swSubFeat = swSubFeat.GetNextFeature();
}
}
swFeat2 = swFeat2.GetNextFeature();
}
}
catch (Exception)
{
//
}
return(propertyValue);
}
public void AjouterDossier(BodyFolder dossier, Component2 comp)
{
Body2 corps = dossier.ePremierCorps();
if (corps.IsNull())
{
return;
}
String Repere = "";
if (dossier.ePropExiste(CONSTANTES.REF_DOSSIER))
{
Repere = dossier.eProp(CONSTANTES.REF_DOSSIER);
}
else
{
Repere = Erreur;
}
Ajouter(Repere, dossier, comp);
}
/// <summary>
/// Returns sheet metal cut list by configuration name
/// </summary>
/// <param name="configuratuinName"></param>
/// <param name="SwModel"></param>
/// <returns></returns>
public static DataToExport GetDataToExport(ModelDoc2 swModel)
{
solidWorksDocument = swModel;
DataToExport dataToExport = new DataToExport();
string valOut;
const string BoundingBoxLengthRu = @"Длина граничной рамки"; // rename, change number to eng/rus
const string BoundingBoxLengthEng = @"Bounding Box Length";
const string BoundingBoxWidthRu = @"Ширина граничной рамки";
const string BoundingBoxWidthEng = @"Bounding Box Width";
const string SheetMetalThicknessRu = @"Толщина листового металла";
const string SheetMetalThicknessEng = @"Sheet Metal Thickness";
const string BendsRu = @"Сгибы";
const string BendsEng = @"Bends";
Feature swFeat2 = solidWorksDocument.FirstFeature();
while (swFeat2 != null)
{
if (swFeat2.GetTypeName2() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = swFeat2.GetSpecificFeature2();
swFeat2.Select2(false, -1);
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.UpdateCutList();
Feature swSubFeat = swFeat2.GetFirstSubFeature();
while (swSubFeat != null)
{
if (swSubFeat.GetTypeName2() == "CutListFolder")
{
//MessageObserver.Instance.SetMessage("GetTypeName2: " + swSubFeat.GetTypeName2() + "; swSubFeat.Name " + swSubFeat.Name);
BodyFolder bodyFolder = swSubFeat.GetSpecificFeature2();
if (bodyFolder.GetCutListType() != (int)swCutListType_e.swSheetmetalCutlist)
{
goto m1;
}
swSubFeat.Select2(false, -1);
bodyFolder.SetAutomaticCutList(true);
bodyFolder.UpdateCutList();
var swCustProp = swSubFeat.CustomPropertyManager;
string tempOutBoundingBoxLength;
swCustProp.Get4(BoundingBoxLengthRu, true, out valOut, out tempOutBoundingBoxLength);
if (string.IsNullOrEmpty(tempOutBoundingBoxLength))
{
swCustProp.Get4(BoundingBoxLengthEng, true, out valOut, out tempOutBoundingBoxLength);
}
dataToExport.WorkpieceX = SafeConvertToDecemal(tempOutBoundingBoxLength);//Convert.ToDecimal(tempOutBoundingBoxLength.Replace(".", ","));
string ширинаГраничнойРамки;
swCustProp.Get4(BoundingBoxWidthRu, true, out valOut,
out ширинаГраничнойРамки);
if (string.IsNullOrEmpty(ширинаГраничнойРамки))
{
swCustProp.Get4(BoundingBoxWidthEng, true, out valOut,
out ширинаГраничнойРамки);
}
dataToExport.WorkpieceY = SafeConvertToDecemal(ширинаГраничнойРамки);//Convert.ToDecimal(ширинаГраничнойРамки.Replace(".", ","));
string толщинаЛистовогоМеталла;
swCustProp.Get4(SheetMetalThicknessRu, true, out valOut,
out толщинаЛистовогоМеталла);
if (string.IsNullOrEmpty(толщинаЛистовогоМеталла))
{
swCustProp.Get4(SheetMetalThicknessEng, true, out valOut,
out толщинаЛистовогоМеталла);
}
dataToExport.Thickness = SafeConvertToDecemal(толщинаЛистовогоМеталла);//Convert.ToDecimal(толщинаЛистовогоМеталла.Replace(".", ","), );
string сгибы;
swCustProp.Get4(BendsRu, true, out valOut, out сгибы);
if (string.IsNullOrEmpty(сгибы))
{
swCustProp.Get4(BendsEng, true, out valOut, out сгибы);
}
// swCustProp.Set(BendsRu, сгибы);
dataToExport.Bend = Convert.ToInt32(сгибы);
dataToExport.PaintX = GetDimentions()[0];
dataToExport.PaintY = GetDimentions()[1];
dataToExport.PaintZ = GetDimentions()[2];
dataToExport.SurfaceArea = GetSurfaceArea();
}
m1:
swSubFeat = swSubFeat.GetNextFeature();
}
}
swFeat2 = swFeat2.GetNextFeature();
}
solidWorksDocument = null;
return(dataToExport);
}
protected override void Command()
{
try
{
// On liste les composants
var ListeComposants = MdlBase.pListerComposants();
// On boucle sur les modeles
foreach (var mdl in ListeComposants.Keys)
{
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
foreach (var nomCfg in ListeComposants[mdl].Keys)
{
mdl.ShowConfiguration2(nomCfg);
mdl.EditRebuild3();
var piece = mdl.ePartDoc();
var ListeDossier = piece.eListeDesFonctionsDePiecesSoudees(
swD =>
{
BodyFolder Dossier = swD.GetSpecificFeature2();
// Si le dossier est la racine d'un sous-ensemble soudé, il n'y a rien dedans
if (Dossier.IsRef() && (Dossier.eEstExclu() == false) && (Dossier.eNbCorps() > 0) &&
(eTypeCorps.Barre).HasFlag(Dossier.eTypeDeDossier()))
{
return(true);
}
return(false);
}
);
var NbConfig = ListeComposants[mdl][nomCfg];
foreach (var fDossier in ListeDossier)
{
BodyFolder Dossier = fDossier.GetSpecificFeature2();
var SwCorps = Dossier.ePremierCorps();
var NomCorps = SwCorps.Name;
var MateriauCorps = SwCorps.eGetMateriauCorpsOuPiece(piece, nomCfg);
var NbCorps = Dossier.eNbCorps() * NbConfig;
var Profil = Dossier.eProfilDossier();
var Longueur = Dossier.eLongueurProfilDossier().eToDouble();
for (int i = 0; i < NbCorps; i++)
{
var LgTmp = Longueur;
while (LgTmp > LgMax)
{
RassemblerBarre(MateriauCorps, Profil, LgMax);
LgTmp -= LgMax;
}
RassemblerBarre(MateriauCorps, Profil, LgTmp);
}
}
}
mdl.eFermerSiDifferent(MdlBase);
}
// On fait la mise en barre
foreach (var Materiau in DicBarres.Keys)
{
WindowLog.SautDeLigne();
WindowLog.EcrireF("{0}", Materiau);;
foreach (var Profil in DicBarres[Materiau].Keys)
{
WindowLog.SautDeLigne();
WindowLog.EcrireF(" {0}", Profil);
var lst = DicBarres[Materiau][Profil];
lst.Sort();
lst.Reverse();
foreach (var lg in lst)
{
WindowLog.EcrireF(" - {0}", lg);
}
int i = 0;
while (true)
{
var lg = lst[i];
if (AjouterBarre(Materiau, Profil, lg))
{
lst.RemoveAt(i);
if (lst.Count == 0)
{
break;
}
}
else
{
i++;
}
if (i >= lst.Count)
{
i = 0;
NouvelleBarre(Materiau, Profil);
}
}
}
}
String Resume = "";
foreach (var Materiau in DicMateriau.Keys)
{
Resume += System.Environment.NewLine;
Resume += String.Format("{0}", Materiau);
foreach (var Profil in DicMateriau[Materiau].Keys)
{
var Ligne = DicMateriau[Materiau][Profil];
Resume += System.Environment.NewLine;
Resume += String.Format(" {1,4}× {0,-25} [{2:N0}]", Profil, Ligne.NbBarre, Ligne.Reste);
}
}
WindowLog.SautDeLigne();
WindowLog.Ecrire("A commander");
WindowLog.Ecrire(Resume);
WindowLog.SautDeLigne();
File.WriteAllText(Path.Combine(MdlBase.eDossier(), "CommandeProfil.txt"), Resume);
}
catch (Exception e)
{
this.LogErreur(new Object[] { e });
}
}
private void Ajouter(String baseMateriau, String materiau, String profil, BodyFolder dossier, Component2 cp)
{
SortedDictionary <String, SortedDictionary <String, List <Element> > > dicMat = new SortedDictionary <String, SortedDictionary <String, List <Element> > >(new WindowsStringComparer());
if (Dic.ContainsKey(baseMateriau))
{
dicMat = Dic[baseMateriau];
}
else
{
Dic.Add(baseMateriau, dicMat);
}
SortedDictionary <String, List <Element> > dicProfil = new SortedDictionary <String, List <Element> >(new WindowsStringComparer());
if (dicMat.ContainsKey(materiau))
{
dicProfil = dicMat[materiau];
}
else
{
dicMat.Add(materiau, dicProfil);
}
List <Element> listElements = new List <Element>();
if (dicProfil.ContainsKey(profil))
{
listElements = dicProfil[profil];
}
else
{
dicProfil.Add(profil, listElements);
}
foreach (var corps in dossier.eListeDesCorps())
{
listElements.Add(new Element(corps, cp));
}
}
protected override void Command()
{
try
{
var ListeComposants = MdlBase.ListerComposants(false);
eTypeCorps Filtre = eTypeCorps.Barre | eTypeCorps.Tole;
var Dic = new HashSet <String>();
Boolean Erreur = false;
Predicate <Feature> Test =
f =>
{
BodyFolder dossier = f.GetSpecificFeature2();
if (dossier.IsRef() && dossier.eNbCorps() > 0 && Filtre.HasFlag(dossier.eTypeDeDossier()))
{
var RefDossier = dossier.eProp(CONSTANTES.REF_DOSSIER);
if (String.IsNullOrWhiteSpace(RefDossier))
{
return(true);
}
}
return(false);
};
foreach (var mdl in ListeComposants.Keys)
{
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
foreach (var t in ListeComposants[mdl])
{
var cfg = t.Key;
var nbCfg = t.Value;
mdl.ShowConfiguration2(cfg);
mdl.EditRebuild3();
var Piece = mdl.ePartDoc();
foreach (var fDossier in Piece.eListeDesFonctionsDePiecesSoudees(Test))
{
WindowLog.EcrireF("{0} \"{1}\"", mdl.eNomSansExt(), cfg);
WindowLog.EcrireF(" {0} : Pas de reference", fDossier.Name);
Erreur = true;
}
}
mdl.eFermerSiDifferent(MdlBase);
}
if (!Erreur)
{
WindowLog.Ecrire("Aucune erreur\n");
}
}
catch (Exception e)
{
this.LogErreur(new Object[] { e });
}
}
protected override void Command()
{
CreerDossierDVP();
WindowLog.Ecrire(String.Format("Dossier :\r\n{0}", new DirectoryInfo(DossierExport).Name));
try
{
eTypeCorps Filtre = PrendreEnCompteTole ? eTypeCorps.Barre | eTypeCorps.Tole : eTypeCorps.Barre;
HashSet <String> HashMateriaux = new HashSet <string>(ListeMateriaux);
var dic = MdlBase.DenombrerDossiers(ComposantsExterne,
fDossier =>
{
BodyFolder swDossier = fDossier.GetSpecificFeature2();
if (Filtre.HasFlag(swDossier.eTypeDeDossier()) && HashMateriaux.Contains(swDossier.eGetMateriau()))
{
return(true);
}
return(false);
}
);
if (ListerUsinages)
{
Nomenclature.TitreColonnes("Barre ref.", "Materiau", "Profil", "Lg", "Nb", "Usinage Ext 1", "Usinage Ext 2", "Détail des Usinage interne");
}
else
{
Nomenclature.TitreColonnes("Barre ref.", "Materiau", "Profil", "Lg", "Nb");
}
int MdlPct = 0;
foreach (var mdl in dic.Keys)
{
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
WindowLog.SautDeLigne();
WindowLog.EcrireF("[{1}/{2}] {0}", mdl.eNomSansExt(), ++MdlPct, dic.Count);
int CfgPct = 0;
foreach (var NomConfigPliee in dic[mdl].Keys)
{
WindowLog.SautDeLigne();
WindowLog.EcrireF(" [{1}/{2}] Config : \"{0}\"", NomConfigPliee, ++CfgPct, dic[mdl].Count);
mdl.ShowConfiguration2(NomConfigPliee);
mdl.EditRebuild3();
PartDoc Piece = mdl.ePartDoc();
var ListeDossier = dic[mdl][NomConfigPliee];
int DrPct = 0;
foreach (var t in ListeDossier)
{
var IdDossier = t.Key;
var QuantiteBarre = t.Value * Quantite;
Feature fDossier = Piece.FeatureById(IdDossier);
BodyFolder dossier = fDossier.GetSpecificFeature2();
var RefDossier = dossier.eProp(CONSTANTES.REF_DOSSIER);
Body2 Barre = dossier.ePremierCorps();
String Profil = dossier.eProp(CONSTANTES.PROFIL_NOM);
String Longueur = dossier.eProp(CONSTANTES.PROFIL_LONGUEUR);
String Materiau = Barre.eGetMateriauCorpsOuPiece(Piece, NomConfigPliee);
Materiau = ForcerMateriau.IsRefAndNotEmpty(Materiau);
String NomFichierBarre = ConstruireNomFichierBarre(RefDossier, QuantiteBarre);
WindowLog.SautDeLigne();
WindowLog.EcrireF(" - [{1}/{2}] Dossier : \"{0}\" x{3}", RefDossier, ++DrPct, ListeDossier.Count, QuantiteBarre);
WindowLog.EcrireF(" Profil {0} Materiau {1}", Profil, Materiau);
List <String> Liste = new List <String>()
{
RefDossier, Materiau, Profil, Math.Round(Longueur.eToDouble()).ToString(), "× " + QuantiteBarre.ToString()
};
if (ListerUsinages)
{
var analyse = new AnalyseBarre(Barre, mdl);
Dictionary <String, Double> Dic = new Dictionary <string, double>();
foreach (var u in analyse.ListeFaceUsinageSection)
{
String nom = u.ListeFaceDecoupe.Count + " face - Lg " + Math.Round(u.LgUsinage * 1000, 1);
if (Dic.ContainsKey(nom))
{
Dic[nom] += 1;
}
else
{
Dic.Add(nom, 1);
}
}
Liste.Add(Math.Round(analyse.ListeFaceUsinageExtremite[0].LgUsinage * 1000, 1).ToString());
if (analyse.ListeFaceUsinageExtremite.Count > 1)
{
Liste.Add(Math.Round(analyse.ListeFaceUsinageExtremite[1].LgUsinage * 1000, 1).ToString());
}
else
{
Liste.Add("");
}
foreach (var nom in Dic.Keys)
{
Liste.Add(Dic[nom] + "x [ " + nom + " ]");
}
}
Nomenclature.AjouterLigne(Liste.ToArray());
if (ExporterBarres)
{
//mdl.ViewZoomtofit2();
//mdl.ShowNamedView2("*Isométrique", 7);
String CheminFichier;
ModelDoc2 mdlBarre = Barre.eEnregistrerSous(Piece, DossierExport, NomFichierBarre, TypeExport, out CheminFichier);
if (CreerPdf3D)
{
String CheminPDF = Path.Combine(DossierExportPDF, NomFichierBarre + eTypeFichierExport.PDF.GetEnumInfo <ExtFichier>());
mdlBarre.SauverEnPdf3D(CheminPDF);
}
mdlBarre.eFermer();
}
}
}
mdl.eFermerSiDifferent(MdlBase);
}
WindowLog.SautDeLigne();
WindowLog.Ecrire(Nomenclature.ListeLignes());
CheminNomenclature = Path.Combine(DossierExport, "Nomenclature.txt");
StreamWriter s = new StreamWriter(CheminNomenclature);
s.Write(Nomenclature.GenererTableau());
s.Close();
}
catch (Exception e) { this.LogErreur(new Object[] { e }); }
}
protected override void Command()
{
try
{
if (ConvertirEsquisse)
{
WindowLog.Ecrire("Attention !!!");
WindowLog.Ecrire("Les dvp seront convertis en esquisse");
WindowLog.SautDeLigne();
}
CreerDossierDVP();
eTypeCorps Filtre = eTypeCorps.Tole;
HashSet <String> HashMateriaux = new HashSet <string>(ListeMateriaux);
HashSet <String> HashEp = new HashSet <string>(ListeEp);
var dic = MdlBase.DenombrerDossiers(ComposantsExterne,
fDossier =>
{
BodyFolder swDossier = fDossier.GetSpecificFeature2();
if (Filtre.HasFlag(swDossier.eTypeDeDossier()) && HashMateriaux.Contains(swDossier.eGetMateriau()))
{
String Ep = swDossier.ePremierCorps().eEpaisseurCorps().ToString();
if (HashEp.Contains(Ep))
{
return(true);
}
}
return(false);
}
);
int MdlPct = 0;
foreach (var mdl in dic.Keys)
{
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
WindowLog.SautDeLigne();
WindowLog.EcrireF("[{1}/{2}] {0}", mdl.eNomSansExt(), ++MdlPct, dic.Count);
int CfgPct = 0;
foreach (var NomConfigPliee in dic[mdl].Keys)
{
WindowLog.SautDeLigne();
WindowLog.EcrireF(" [{1}/{2}] Config : \"{0}\"", NomConfigPliee, ++CfgPct, dic[mdl].Count);
mdl.ShowConfiguration2(NomConfigPliee);
mdl.EditRebuild3();
PartDoc Piece = mdl.ePartDoc();
var ListeDossier = dic[mdl][NomConfigPliee];
int DrPct = 0;
foreach (var t in ListeDossier)
{
var IdDossier = t.Key;
var QuantiteTole = t.Value * Quantite;
Feature fDossier = Piece.FeatureById(IdDossier);
BodyFolder dossier = fDossier.GetSpecificFeature2();
var RefDossier = dossier.eProp(CONSTANTES.REF_DOSSIER);
Body2 Tole = dossier.eCorpsDeTolerie();
WindowLog.SautDeLigne();
WindowLog.EcrireF(" - [{1}/{2}] Dossier : \"{0}\" x{3}", RefDossier, ++DrPct, ListeDossier.Count, QuantiteTole);
String Materiau = Tole.eGetMateriauCorpsOuPiece(Piece, NomConfigPliee);
Materiau = ForcerMateriau.IsRefAndNotEmpty(Materiau);
Double Epaisseur = Tole.eEpaisseurCorps();
String NomConfigDepliee = Sw.eNomConfigDepliee(NomConfigPliee, RefDossier);
WindowLog.EcrireF(" Ep {0} / Materiau {1}", Epaisseur, Materiau);
WindowLog.EcrireF(" Config {0}", NomConfigDepliee);
if (ConvertirEsquisse)
{
if (!mdl.eListeNomConfiguration().Contains(NomConfigDepliee))
{
mdl.CreerConfigDepliee(NomConfigDepliee, NomConfigPliee);
}
WindowLog.EcrireF(" Configuration crée : {0}", NomConfigDepliee);
mdl.ShowConfiguration2(NomConfigDepliee);
Tole.DeplierTole(mdl, NomConfigDepliee);
}
else if (!mdl.ShowConfiguration2(NomConfigDepliee))
{
DicErreur.Add(mdl.eNomSansExt() + " -> cfg : " + NomConfigPliee + " - No : " + RefDossier + " = " + NomConfigDepliee);
WindowLog.EcrireF("La configuration n'éxiste pas");
continue;
}
mdl.EditRebuild3();
DrawingDoc dessin = CreerPlan(Materiau, Epaisseur);
dessin.eModelDoc2().eActiver();
Sheet Feuille = dessin.eFeuilleActive();
View v = CreerVueToleDvp(dessin, Feuille, Piece, NomConfigDepliee, RefDossier, Materiau, QuantiteTole, Epaisseur);
if (ConvertirEsquisse)
{
mdl.ShowConfiguration2(NomConfigPliee);
mdl.EditRebuild3();
mdl.DeleteConfiguration2(NomConfigDepliee);
}
}
NouvelleLigne = true;
}
mdl.eFermerSiDifferent(MdlBase);
}
foreach (DrawingDoc dessin in DicDessins.Values)
{
int Errors = 0, Warnings = 0;
dessin.eModelDoc2().eActiver();
dessin.eFeuilleActive().eAjusterAutourDesVues();
dessin.eModelDoc2().ViewZoomtofit2();
dessin.eModelDoc2().Save3((int)swSaveAsOptions_e.swSaveAsOptions_SaveReferenced + (int)swSaveAsOptions_e.swSaveAsOptions_Silent, ref Errors, ref Warnings);
}
if (FermerPlan)
{
foreach (ModelDoc2 dessin in DicDessins.Values)
{
dessin.eFermer();
}
}
if (DicErreur.Count > 0)
{
WindowLog.SautDeLigne();
WindowLog.Ecrire("Liste des erreurs :");
foreach (var item in DicErreur)
{
WindowLog.Ecrire(" - " + item);
}
WindowLog.SautDeLigne();
}
else
{
WindowLog.Ecrire("Pas d'erreur");
}
File.WriteAllText(Path.Combine(DossierDVP, "Log_CreerDvp.txt"), WindowLog.Resume);
}
catch (Exception e)
{
this.LogErreur(new Object[] { e });
}
}
/// <summary>
/// Pour pouvoir obtenir une référence unique pour chaque dossier de corps, identiques
/// dans l'assemblage, on passe par la création d'une propriété dans chaque dossier.
/// Cette propriété est liée à une cote dans une esquisse dont la valeur est égale au repère.
/// Suivant la configuration, la valeur de la cote peut changer et donc le repère du dossier.
/// C'est le seul moyen pour avoir un lien entre les dossiers et la configuration du modèle.
/// Les propriétés des dossiers ne sont pas configurables.
/// </summary>
protected override void Command()
{
try
{
App.Sw.CommandInProgress = true;
// Si aucun corps n'a déjà été repéré, on reinitialise tout
if (ListeCorps.Count == 0)
{
// On supprime tout les fichiers
foreach (FileInfo file in new DirectoryInfo(MdlBase.pDossierPiece()).GetFiles())
{
file.Delete();
}
}
if (ReinitCampagneActuelle && (ListeCorps.Count > 0))
{
// On supprime les repères de la campagne actuelle
// On recherche les repères appartenant aux campagnes précédentes
// pour ne pas supprimer les fichiers
// Si la somme des quantités des campagnes précédente est superieure à 0
// on garde le repère
ListeSortedCorps FichierAsauvegarder = new ListeSortedCorps();
FichierAsauvegarder.CampagneDepartDecompte = ListeCorps.CampagneDepartDecompte;
foreach (var corps in ListeCorps.Values)
{
int nb = 0;
foreach (var camp in corps.Campagne)
{
if (camp.Key < IndiceCampagne)
{
nb += camp.Value;
}
else
{
break;
}
}
if (nb > 0)
{
FichierAsauvegarder.Add(corps.Repere, corps);
}
}
// On nettoie les fichiers précedement crées
foreach (var corps in ListeCorps.Values)
{
if (FichierAsauvegarder.ContainsKey(corps.Repere))
{
continue;
}
corps.SupprimerFichier();
}
ListeCorps = FichierAsauvegarder;
}
// On supprime les campagnes superieures à l'indice actuelle
foreach (var corps in ListeCorps.Values)
{
for (int i = IndiceCampagne; i < corps.Campagne.Keys.Max(); i++)
{
if (corps.Campagne.ContainsKey(i + 1))
{
corps.Campagne.Remove(i + 1);
}
}
}
WindowLog.SautDeLigne();
WindowLog.EcrireF("Campagne de départ : {0}", ListeCorps.CampagneDepartDecompte);
// On charge les corps existant à partir des fichiers
// et seulement ceux dont la quantité pour CampagneDepartDecompte est supérieure à 0
if (CombinerCorpsIdentiques && (ListeCorps.Count > 0))
{
var FiltreCampagne = IndiceCampagne;
if (CombinerAvecCampagnePrecedente)
{
FiltreCampagne = ListeCorps.CampagneDepartDecompte;
}
WindowLog.SautDeLigne();
WindowLog.Ecrire("Chargement des corps existants :");
foreach (var corps in ListeCorps.Values)
{
// On additionne les quantités pour les corps supperieur à filtreCampagne
// S
if (corps.Campagne.ContainsKey(FiltreCampagne) &&
corps.Campagne.Sum(d => d.Key >= FiltreCampagne? d.Value : 0) > 0 &&
File.Exists(corps.CheminFichierRepere)
)
{
WindowLog.EcrireF(" - {0}", corps.RepereComplet);
corps.ChargerCorps();
}
}
}
// On reinitialise la quantité pour la campagne actuelle à 0
foreach (var corps in ListeCorps.Values)
{
corps.InitCampagne(IndiceCampagne);
}
////////////////////////////////// DEBUT DU REPERAGE ////////////////////////////////////////////////////
MdlBase.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
MdlBase.eActiverManager(false);
WindowLog.SautDeLigne();
WindowLog.Ecrire("Debut du repérage");
// On recherche l'indice de repere max
if (ListeCorps.Count > 0)
{
_GenRepereDossier = ListeCorps.Keys.Max();
}
// On liste les composants
var ListeComposants = MdlBase.pListerComposants();
// On boucle sur les modeles
foreach (var mdl in ListeComposants.Keys)
{
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
mdl.eActiverManager(false);
// On met à jour les options
mdl.Extension.SetUserPreferenceToggle(((int)(swUserPreferenceToggle_e.swDisableDerivedConfigurations)), 0, false);
mdl.Extension.SetUserPreferenceToggle(((int)(swUserPreferenceToggle_e.swWeldmentRenameCutlistDescriptionPropertyValue)), 0, true);
mdl.Extension.SetUserPreferenceToggle(((int)(swUserPreferenceToggle_e.swWeldmentCollectIdenticalBodies)), 0, true);
mdl.Extension.SetUserPreferenceString(((int)(swUserPreferenceStringValue_e.swSheetMetalDescription)), 0, "Tôle");
if (mdl.ePartDoc().eDossierListeDesPiecesSoudees().GetAutomaticUpdate() == false)
{
mdl.ePartDoc().eMajListeDesPiecesSoudeesAuto(true);
mdl.EditRebuild3();
}
// On crée l'esquisse pour le reperage des dossiers
mdl.pEsquisseRepere();
// Si le modele est a repérer complètement
Boolean InitModele = true;
// On recherche l'index de la dimension maximum
int IndexDimension = 0;
// On liste les dossiers déja traité pour l'attribution des nouveaux index de dimension
HashSet <int> HashPieceIdDossiers = new HashSet <int>();
// Les données sont stockées dans des propriétés du modèle
// Le nom du modèle est stocké dans une propriété, si le modèle est copié
// la propriété n'est plus valable, on force le repérage
// On récupère également le dernier indice de la dimension utilisée
if (mdl.ePropExiste(CONST_PRODUCTION.ID_PIECE) && (mdl.eGetProp(CONST_PRODUCTION.ID_PIECE) == mdl.eNomSansExt()))
{
InitModele = false;
if (mdl.ePropExiste(CONST_PRODUCTION.MAX_INDEXDIM))
{
IndexDimension = mdl.eGetProp(CONST_PRODUCTION.MAX_INDEXDIM).eToInteger();
}
if (mdl.ePropExiste(CONST_PRODUCTION.PIECE_ID_DOSSIERS))
{
var tab = mdl.eGetProp(CONST_PRODUCTION.PIECE_ID_DOSSIERS).Split(new char[] { ' ' }, StringSplitOptions.RemoveEmptyEntries);
foreach (var id in tab)
{
HashPieceIdDossiers.Add(id.eToInteger());
}
}
}
////////////////////////////////// BOUCLE SUR LES CONFIGS ////////////////////////////////////////////////////
foreach (var nomCfg in ListeComposants[mdl].Keys)
{
mdl.ShowConfiguration2(nomCfg);
mdl.EditRebuild3();
WindowLog.SautDeLigne();
WindowLog.EcrireF("{0} \"{1}\"", mdl.eNomSansExt(), nomCfg);
HashSet <int> HashConfigIdDossiers = new HashSet <int>();
Boolean InitConfig = true;
int IdCfg = mdl.GetConfigurationByName(nomCfg).GetID();
// Idem modèle, on stock l'id de la config dans une propriété.
// Si une nouvelle config est crée, la valeur de cette propriété devient caduc,
// on repère alors les dossiers
// On en profite pour récupérer la liste des ids de dossiers déjà traité dans les précédentes
// campagne de repérage
if (!InitModele && mdl.ePropExiste(CONST_PRODUCTION.ID_CONFIG, nomCfg) && (mdl.eGetProp(CONST_PRODUCTION.ID_CONFIG, nomCfg) == IdCfg.ToString()))
{
InitConfig = false;
if (mdl.ePropExiste(CONST_PRODUCTION.CONFIG_ID_DOSSIERS, nomCfg))
{
var tab = mdl.eGetProp(CONST_PRODUCTION.CONFIG_ID_DOSSIERS, nomCfg).Split(new char[] { ' ' }, StringSplitOptions.RemoveEmptyEntries);
foreach (var id in tab)
{
HashConfigIdDossiers.Add(id.eToInteger());
}
}
}
var piece = mdl.ePartDoc();
var ListeDossier = piece.eListeDesFonctionsDePiecesSoudees(
swD =>
{
BodyFolder Dossier = swD.GetSpecificFeature2();
// Si le dossier est la racine d'un sous-ensemble soudé, il n'y a rien dedans
if (Dossier.IsRef() && (Dossier.eNbCorps() > 0) && !Dossier.eEstExclu() &&
FiltrerCorps.HasFlag(Dossier.eTypeDeDossier()))
{
return(true);
}
return(false);
}
);
var NbConfig = ListeComposants[mdl][nomCfg];
////////////////////////////////// BOUCLE SUR LES DOSSIERS ////////////////////////////////////////////////////
foreach (var fDossier in ListeDossier)
{
BodyFolder Dossier = fDossier.GetSpecificFeature2();
int IdDossier = fDossier.GetID();
Dimension param = null;
if (!HashPieceIdDossiers.Contains(IdDossier))
{
param = CreerParam(mdl, fDossier, nomCfg, ++IndexDimension);
}
else
{
param = GetParam(mdl, fDossier, nomCfg);
}
var SwCorps = Dossier.ePremierCorps();
var NomCorps = SwCorps.Name;
var MateriauCorps = SwCorps.eGetMateriauCorpsOuPiece(piece, nomCfg);
eTypeCorps TypeCorps = Dossier.eTypeDeDossier();
var nbCorps = Dossier.eNbCorps() * NbConfig;
int Repere = -1;
if (CombinerCorpsIdentiques)
{
// On recherche s'il existe des corps identiques
// Si oui, on applique le même repère au parametre
foreach (var CorpsTest in ListeCorps.Values)
{
if (CorpsTest.SwCorps.IsRef() &&
(CombinerAvecCampagnePrecedente || CorpsTest.Campagne.ContainsKey(IndiceCampagne)) &&
(MateriauCorps == CorpsTest.Materiau) &&
(TypeCorps == CorpsTest.TypeCorps) &&
SwCorps.eComparerGeometrie(CorpsTest.SwCorps) == Sw.Comparaison_e.Semblable)
{
Repere = CorpsTest.Repere;
SetRepere(param, CorpsTest.Repere, nomCfg);
break;
}
}
}
// Initialisation du repère
if (Repere.eEstNegatif())
{
// A tester
// Si on est mode "MajCampagnePrecedente", ça évite de repérer une seconde fois les pièces
// Si on est pas en mode "Combiner les corps"
// on recupère le repère du dossier
// Sinon c'est forcément un nouveau repère
if (!CombinerCorpsIdentiques)
{
Repere = GetRepere(param, nomCfg);
}
// Création d'un nouveau repère suivant conditions
// Dans tous les cas, si la clé est négative, on crée un nouveau repère
if (Repere.eEstNegatif() ||
InitConfig ||
!HashConfigIdDossiers.Contains(IdDossier) ||
!ListeCorps.ContainsKey(Repere))
{
Repere = GenRepereDossier;
SetRepere(param, Repere, nomCfg);
}
}
// Initialisation du corps
Corps corps = null;
if (!ListeCorps.ContainsKey(Repere))
{
corps = new Corps(SwCorps, TypeCorps, MateriauCorps, MdlBase);
corps.InitCampagne(IndiceCampagne);
ListeCorps.Add(Repere, corps);
}
else
{
corps = ListeCorps[Repere];
}
corps.Campagne[IndiceCampagne] += nbCorps;
corps.Repere = Repere;
corps.InitCaracteristiques(Dossier, SwCorps);
corps.AjouterModele(mdl, nomCfg, IdDossier, NomCorps);
HashPieceIdDossiers.Add(IdDossier);
HashConfigIdDossiers.Add(IdDossier);
WindowLog.EcrireF(" - {1} -> {0}", fDossier.Name, corps.RepereComplet);
}
mdl.ePropAdd(CONST_PRODUCTION.ID_CONFIG, IdCfg, nomCfg);
mdl.ePropAdd(CONST_PRODUCTION.CONFIG_ID_DOSSIERS, String.Join(" ", HashConfigIdDossiers), nomCfg);
}
mdl.ePropAdd(CONST_PRODUCTION.ID_PIECE, mdl.eNomSansExt());
mdl.ePropAdd(CONST_PRODUCTION.PIECE_ID_DOSSIERS, String.Join(" ", HashPieceIdDossiers));
mdl.ePropAdd(CONST_PRODUCTION.MAX_INDEXDIM, IndexDimension);
mdl.eActiverManager(true);
mdl.eSauver();
mdl.eFermerSiDifferent(MdlBase);
}
MdlBase.eActiverManager(true);
MdlBase.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
MdlBase.EditRebuild3();
MdlBase.eSauver();
////////////////////////////////// FIN DU REPERAGE ////////////////////////////////////////////////////
// On fermer les fichiers chargé
foreach (var corps in ListeCorps.Values)
{
Sw.eFermer(corps.CheminFichierRepere);
}
WindowLog.SautDeLigne();
if (ListeCorps.Count > 0)
{
WindowLog.EcrireF("Nb de repères : {0}", ListeCorps.Keys.Max());
}
else
{
WindowLog.Ecrire("Aucun corps repéré");
}
// S'il n'y a aucun corps, on se barre
if (ListeCorps.Count == 0)
{
return;
}
////////////////////////////////// EXPORTER LES CORPS /////////////////////////////////////////////////
WindowLog.SautDeLigne();
WindowLog.Ecrire("Export des corps :");
foreach (var corps in ListeCorps.Values)
{
if (corps.Modele.IsNull())
{
continue;
}
// Si on est pas en mode "Combiner corps identique" et que le fichier existe
// on le supprime pour le mettre à jour, sinon on peut se retrouver
// avec des fichiers ne correpondants pas au corps
if (!CombinerCorpsIdentiques)
{
corps.SupprimerFichier();
}
// Si le fichier existe, on passe au suivant
if (File.Exists(corps.CheminFichierRepere))
{
continue;
}
WindowLog.EcrireF("- {0} exporté", CONSTANTES.PREFIXE_REF_DOSSIER + corps.Repere);
corps.SauverRepere(CreerDvp);
}
////////////////////////////////// RECAP /////////////////////////////////////////////////
// Petit récap
WindowLog.SautDeLigne();
WindowLog.EcrireF("Nb de corps unique : {0}", ListeCorps.Count);
int nbtt = 0;
foreach (var corps in ListeCorps.Values)
{
nbtt += corps.Campagne[IndiceCampagne];
if (corps.Campagne[IndiceCampagne] > 0)
{
WindowLog.EcrireF("{2} P{0} ×{1}", corps.Repere, corps.Campagne[IndiceCampagne], IndiceCampagne);
}
}
WindowLog.EcrireF("Nb total de corps : {0}", nbtt);
////////////////////////////////// SAUVEGARDE DE LA NOMENCLATURE /////////////////////////////////////////////
ListeCorps.EcrireNomenclature(MdlBase.pDossierPiece(), IndiceCampagne);
////////////////////////////////////////////////////////////////////////////////////////////////////////////
MdlBase.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
App.Sw.CommandInProgress = false;
var aff = new AffichageElementWPF(ListeCorps, IndiceCampagne);
aff.ShowDialog();
ListeCorps = null;
ListeComposants = null;
}
catch (Exception e) { this.LogErreur(new Object[] { e }); }
}
private void IndiceMax()
{
eTypeCorps Filtre = eTypeCorps.Barre | eTypeCorps.Tole;
var ListeComposants = MdlBase.ListerComposants(false);
Func <Feature, Tuple <String, String> > ExtractRef = delegate(Feature dossier)
{
CustomPropertyManager PM = dossier.CustomPropertyManager;
String val, result = ""; Boolean wasResolved, link;
var r = PM.Get6(CONSTANTES.REF_DOSSIER, false, out val, out result, out wasResolved, out link);
return(new Tuple <String, String>(result.Replace(CONSTANTES.PREFIXE_REF_DOSSIER, ""), val));
};
Predicate <Feature> Test = delegate(Feature f)
{
BodyFolder dossier = f.GetSpecificFeature2();
if (dossier.IsRef() && dossier.eNbCorps() > 0 && Filtre.HasFlag(dossier.eTypeDeDossier()))
{
CustomPropertyManager PM = f.CustomPropertyManager;
String val, result = ""; Boolean wasResolved, link;
var r = PM.Get6(CONSTANTES.REF_DOSSIER, false, out val, out result, out wasResolved, out link);
var RefDossier = ExtractRef(f).Item1;
if (RefDossier.eIsInteger())
{
return(true);
}
}
return(false);
};
foreach (var mdl in ListeComposants.Keys)
{
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
foreach (var t in ListeComposants[mdl])
{
var cfg = t.Key;
var nbCfg = t.Value;
mdl.ShowConfiguration2(cfg);
mdl.EditRebuild3();
var Piece = mdl.ePartDoc();
foreach (var f in Piece.eListeDesFonctionsDePiecesSoudees(Test))
{
var RefDossier = ExtractRef(f);
indice = Math.Max(indice, RefDossier.Item1.eToInteger());
var hashDossier = HashDossier(mdl, f);
DossierTraite.Add(hashDossier);
// On recherche l'index max pour chaque modele
var NomParam = ExtractNomParam(RefDossier.Item2);
var dim = NomParam.Split('@')[0].CleanStringOfNonDigits().eToInteger();
var hashMdl = mdl.GetPathName();
if (IndexDimension.ContainsKey(hashMdl))
{
IndexDimension[hashMdl] = Math.Max(IndexDimension[hashMdl], dim);
}
else
{
IndexDimension[hashMdl] = dim;
}
}
}
mdl.eFermerSiDifferent(MdlBase);
}
WindowLog.EcrireF("Indice Max : {0}", indice);
}
/// <summary>
/// Pour pouvoir obtenir une référence unique pour chaque dossier de corps, identiques
/// dans l'assemblage, on passe par la création d'une propriété dans chaque dossier.
/// Cette propriété est liée à une cote dans une esquisse dont la valeur est égale au repère.
/// Suivant la configuration, la valeur de la cote peut changer et donc le repère du dossier.
/// C'est le seul moyen pour avoir un lien entre les dossiers et la configuration du modèle.
/// Les propriétés des dossiers ne sont pas configurables.
/// </summary>
protected override void Command()
{
try
{
if (MajDossiers)
{
IndiceMax();
}
var ListeCorps = new List <Corps>();
var lst = MdlBase.ListerComposants(false);
foreach (var mdl in lst.Keys)
{
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
EsquisseRepere(mdl);
foreach (var cfg in lst[mdl].Keys)
{
mdl.ShowConfiguration2(cfg);
mdl.EditRebuild3();
WindowLog.SautDeLigne();
WindowLog.EcrireF("{0} \"{1}\"", mdl.eNomSansExt(), cfg);
var piece = mdl.ePartDoc();
var NbConfig = lst[mdl][cfg];
var ListeDossier = piece.eListeDesFonctionsDePiecesSoudees(
swD =>
{
BodyFolder Dossier = swD.GetSpecificFeature2();
// Si le dossier est la racine d'un sous-ensemble soudé, il n'y a rien dedans
if (Dossier.IsRef() && Dossier.eNbCorps() > 0 &&
(eTypeCorps.Barre | eTypeCorps.Tole).HasFlag(Dossier.eTypeDeDossier()))
{
return(true);
}
return(false);
}
);
foreach (var fDossier in ListeDossier)
{
BodyFolder Dossier = fDossier.GetSpecificFeature2();
CustomPropertyManager PM = fDossier.CustomPropertyManager;
// Si MajDossier et PropExiste, ne pas mettre à jour
Boolean Maj = !(MajDossiers && PM.ePropExiste(CONSTANTES.REF_DOSSIER));
String NomParam = "";
WindowLog.EcrireF(" {0}", fDossier.Name);
// On recherche si le dossier à déjà été traité.
// Si non, on ajoute le dossier à la liste
// On met à jour la liste des index des dimensions :
// On ajoute le nom du modele et on itiniatile l'index à 1
// Ou, puisque c'est un nouveau dossier, on ajoute un à l'index existant.
// On créer le nom du paramètre
// On ajoute la propriété au dossier selon le modèle suivant :
// P"D1@REPERAGE_DOSSIER@Nom_de_la_piece.SLDPRT"
// Si oui, on récupère le nom du paramètre
var clef = HashDossier(mdl, fDossier);
if (!DossierTraite.Contains(clef))
{
DossierTraite.Add(clef);
IndexDimension.AddIfNotExistOrPlus(mdl.GetPathName());
NomParam = String.Format("D{0}@{1}", IndexDimension[mdl.GetPathName()]++, CONSTANTES.NOM_ESQUISSE_NUMEROTER);
var propVal = String.Format("{0}\"{1}@{2}\"", CONSTANTES.PREFIXE_REF_DOSSIER, NomParam, mdl.eNomAvecExt());
var r = PM.ePropAdd(CONSTANTES.REF_DOSSIER, propVal);
if (r > 0)
{
WindowLog.EcrireF("{0}-{1}-{2} : Pas de propriété ajoutée {3}", mdl.eNomSansExt(), cfg, fDossier.Name, (swCustomInfoAddResult_e)r);
}
PM.ePropAdd(CONSTANTES.DESC_DOSSIER, propVal);
}
else
{
String val, result = ""; Boolean wasResolved, link;
var r = PM.Get6(CONSTANTES.REF_DOSSIER, false, out val, out result, out wasResolved, out link);
if (r == 1)
{
WindowLog.EcrireF("{0}-{1}-{2} : Pas de propriété {3}", mdl.eNomSansExt(), cfg, fDossier.Name, (swCustomInfoGetResult_e)r);
}
NomParam = ExtractNomParam(val);
}
{
String val, result = ""; Boolean wasResolved, link;
var r = PM.Get6(CONSTANTES.REF_DOSSIER, false, out val, out result, out wasResolved, out link);
PM.ePropAdd(CONSTANTES.DESC_DOSSIER, val);
}
// On ajoute la propriété NomDossier
// permettant de récupérer le nom du dossier dans la mise en plan
if (!PM.ePropExiste(CONSTANTES.NOM_DOSSIER))
{
var propVal = String.Format("\"SW-CutListItemName@@@{0}@{1}\"", fDossier.Name, mdl.eNomAvecExt());
PM.ePropAdd(CONSTANTES.NOM_DOSSIER, propVal);
}
var SwCorps = Dossier.ePremierCorps();
Boolean Ajoute = false;
var MateriauCorps = SwCorps.eGetMateriauCorpsOuPiece(piece, cfg);
var nbCorps = Dossier.eNbCorps() * NbConfig;
Dimension param = mdl.Parameter(NomParam);
eTypeCorps TypeCorps = Dossier.eTypeDeDossier();
if (CombinerCorpsIdentiques)
{
// On recherche s'il existe des corps identiques
// Si oui, on applique le même repère au parametre
foreach (var CorpsTest in ListeCorps)
{
if ((MateriauCorps != CorpsTest.Materiau) || (TypeCorps != CorpsTest.TypeCorps))
{
continue;
}
if (SwCorps.eComparerGeometrie(CorpsTest.SwCorps) == Sw.Comparaison_e.Semblable)
{
CorpsTest.Nb += nbCorps;
if (Maj)
{
var errors = param.SetSystemValue3(CorpsTest.Repere * 0.001, (int)swSetValueInConfiguration_e.swSetValue_InSpecificConfigurations, cfg);
if (errors > 0)
{
WindowLog.EcrireF(" Erreur de mise à jour {0}", (swSetValueReturnStatus_e)errors);
}
}
CorpsTest.AjouterModele(mdl, cfg, fDossier.GetID());
Ajoute = true;
break;
}
}
}
if ((Ajoute == false) && Maj)
{
var rep = GenRepereDossier;
var errors = param.SetSystemValue3(rep * 0.001, (int)swSetValueInConfiguration_e.swSetValue_InSpecificConfigurations, cfg);
if (errors > 0)
{
WindowLog.EcrireF(" Erreur de mise à jour {0}", (swSetValueReturnStatus_e)errors);
}
var corps = new Corps(SwCorps, TypeCorps, MateriauCorps);
corps.Nb = nbCorps;
corps.Repere = rep;
corps.AjouterModele(mdl, cfg, fDossier.GetID());
ListeCorps.Add(corps);
}
}
}
mdl.eFermerSiDifferent(MdlBase);
}
MdlBase.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
int Errors = 0, Warnings = 0;
MdlBase.Save3((int)swSaveAsOptions_e.swSaveAsOptions_SaveReferenced + (int)swSaveAsOptions_e.swSaveAsOptions_Silent, ref Errors, ref Warnings);
MdlBase.EditRebuild3();
// Petit récap
WindowLog.SautDeLigne();
WindowLog.EcrireF("Nb de corps unique : {0}", ListeCorps.Count);
int nbtt = 0;
foreach (var corps in ListeCorps)
{
nbtt += corps.Nb;
WindowLog.EcrireF("P{0} ×{1}", corps.Repere, corps.Nb);
}
WindowLog.EcrireF("Nb total de corps : {0}", nbtt);
}
catch (Exception e)
{
this.LogErreur(new Object[] { e });
}
}
public static void GetCurrentConfigPartData(SldWorks swApp, int lastVer, int idPdm, bool closeDoc, bool fixBends, out List <DataToExport> dataList, out Exception exception)
//public static void GetCurrentConfigPartData(SldWorks swApp, bool closeDoc, bool fixBends, out List<DataToExport> dataList, out Exception exception)
{
// Проход по всем родительским конфигурациям
exception = null;
dataList = new List <DataToExport>();
var swModel = swApp.IActiveDoc2;
if (swModel == null)
{
return;
}
var configName = ((Configuration)swModel.GetActiveConfiguration()).Name;
swModel.ShowConfiguration2(configName);
swModel.EditRebuild3();
var swModelDocExt = swModel.Extension;
var fileName = swModel.GetTitle().ToUpper().Replace(".SLDPRT", "");
AddDimentions(swModel, configName, out exception);
var confiData = new DataToExport
{
Config = configName,
FileName = fileName,
IdPdm = idPdm,
Version = lastVer
};
#region азгибание всех сгибов
fixBends = true;
if (fixBends)
{
swModel.EditRebuild3();
List <PartBendInfo> list;
Bends.Fix(swApp, out list, false);
}
#endregion
swModel.ForceRebuild3(false);
var swCustProp = swModelDocExt.CustomPropertyManager[configName];
string valOut;
string materialId;
// TO DO LOOK
swCustProp.Get4("MaterialID", true, out valOut, out materialId);
if (string.IsNullOrEmpty(materialId))
{
confiData.MaterialId = null;
}
else
{
confiData.MaterialId = int.Parse(materialId);
}
string paintX;
swCustProp.Get4("Длина", true, out valOut, out paintX);
if (string.IsNullOrEmpty(paintX))
{
confiData.PaintX = null;
}
else
{
confiData.PaintX = double.Parse(paintX);
}
string paintY;
swCustProp.Get4("Ширина", true, out valOut, out paintY);
if (string.IsNullOrEmpty(paintY))
{
confiData.PaintY = null;
}
else
{
confiData.PaintY = double.Parse(paintY);
}
string paintZ;
swCustProp.Get4("Высота", true, out valOut, out paintZ);
if (string.IsNullOrEmpty(paintZ))
{
confiData.PaintZ = null;
}
else
{
confiData.PaintZ = double.Parse(paintZ);
}
string codMaterial;
swCustProp.Get4("Код материала", true, out valOut, out codMaterial);
confiData.КодМатериала = codMaterial;
string материал;
swCustProp.Get4("Материал", true, out valOut, out материал);
confiData.Материал = материал;
string обозначение;
swCustProp.Get4("Обозначение", true, out valOut, out обозначение);
confiData.Обозначение = обозначение;
var swCustPropForDescription = swModelDocExt.CustomPropertyManager[""];
string наименование;
swCustPropForDescription.Get4("Наименование", true, out valOut, out наименование);
confiData.Наименование = наименование;
//UpdateCustomPropertyListFromCutList
const string длинаГраничнойРамкиName = @"Длина граничной рамки";
const string длинаГраничнойРамкиName2 = @"Bounding Box Length";
const string ширинаГраничнойРамкиName = @"Ширина граничной рамки";
const string ширинаГраничнойРамкиName2 = @"Bounding Box Width";
const string толщинаЛистовогоМеталлаNAme = @"Толщина листового металла";
const string толщинаЛистовогоМеталлаNAme2 = @"Sheet Metal Thickness";
const string сгибыName = @"Сгибы";
const string сгибыName2 = @"Bends";
const string площадьПокрытияName = @"Площадь покрытия";//const string площадьПокрытияName2 = @"Bounding Box Area";
Feature swFeat2 = swModel.FirstFeature();
while (swFeat2 != null)
{
if (swFeat2.GetTypeName2() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = swFeat2.GetSpecificFeature2();
swFeat2.Select2(false, -1);
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.UpdateCutList();
Feature swSubFeat = swFeat2.GetFirstSubFeature();
while (swSubFeat != null)
{
if (swSubFeat.GetTypeName2() == "CutListFolder")
{
BodyFolder bodyFolder = swSubFeat.GetSpecificFeature2();
if (bodyFolder.GetCutListType() != (int)swCutListType_e.swSheetmetalCutlist)
{
goto m1;
}
swSubFeat.Select2(false, -1);
bodyFolder.SetAutomaticCutList(true);
bodyFolder.UpdateCutList();
var swCustPrpMgr = swSubFeat.CustomPropertyManager;
swCustPrpMgr.Add("Площадь поверхности", "Текст",
"\"SW-SurfaceArea@@@Элемент списка вырезов1@" +
Path.GetFileName(swModel.GetPathName()) + "\"");
string длинаГраничнойРамки;
swCustPrpMgr.Get4(длинаГраничнойРамкиName, true, out valOut,
out длинаГраничнойРамки);
if (string.IsNullOrEmpty(длинаГраничнойРамки))
{
swCustPrpMgr.Get4(длинаГраничнойРамкиName2, true, out valOut,
out длинаГраничнойРамки);
}
swCustProp.Set(длинаГраничнойРамкиName, длинаГраничнойРамки);
confiData.ДлинаГраничнойРамки = длинаГраничнойРамки;
string ширинаГраничнойРамки;
swCustPrpMgr.Get4(ширинаГраничнойРамкиName, true, out valOut,
out ширинаГраничнойРамки);
if (string.IsNullOrEmpty(ширинаГраничнойРамки))
{
swCustPrpMgr.Get4(ширинаГраничнойРамкиName2, true, out valOut,
out ширинаГраничнойРамки);
}
swCustProp.Set(ширинаГраничнойРамкиName, ширинаГраничнойРамки);
confiData.ШиринаГраничнойРамки = ширинаГраничнойРамки;
string толщинаЛистовогоМеталла;
swCustPrpMgr.Get4(толщинаЛистовогоМеталлаNAme, true, out valOut,
out толщинаЛистовогоМеталла);
if (string.IsNullOrEmpty(толщинаЛистовогоМеталла))
{
swCustPrpMgr.Get4(толщинаЛистовогоМеталлаNAme2, true, out valOut,
out толщинаЛистовогоМеталла);
}
swCustProp.Set(толщинаЛистовогоМеталлаNAme, толщинаЛистовогоМеталла);
confiData.ТолщинаЛистовогоМеталла = толщинаЛистовогоМеталла;
string сгибы;
swCustPrpMgr.Get4(сгибыName, true, out valOut, out сгибы);
if (string.IsNullOrEmpty(сгибы))
{
swCustPrpMgr.Get4(сгибыName2, true, out valOut, out сгибы);
}
swCustProp.Set(сгибыName, сгибы);
confiData.Сгибы = сгибы;
var myMassProp = swModel.Extension.CreateMassProperty();
var площадьПоверхности =
Convert.ToString(Math.Round(myMassProp.SurfaceArea * 1000) / 1000);
swCustProp.Set(площадьПокрытияName, площадьПоверхности);
try
{
confiData.ПлощадьПокрытия =
double.Parse(площадьПоверхности.Replace(".", ","));
}
catch (Exception e)
{
exception = e;
}
}
m1:
swSubFeat = swSubFeat.GetNextFeature();
}
}
swFeat2 = swFeat2.GetNextFeature();
}
dataList.Add(confiData);
if (!closeDoc)
{
return;
}
var namePrt = swApp.IActiveDoc2.GetTitle().ToLower().Contains(".sldprt")
? swApp.IActiveDoc2.GetTitle()
: swApp.IActiveDoc2.GetTitle() + ".sldprt";
swApp.CloseDoc(namePrt);
}
public static void Export(SldWorks swApp, int verToExport, int idPdm, bool closeDoc, out Exception exception)
{
exception = null;
CurrentVersion = verToExport;
//verToExport;
#region Сбор информации по детали и сохранение разверток
if (swApp == null)
{
try
{
swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
}
catch (Exception)
{
swApp = new SldWorks {
Visible = false
};
}
}
IModelDoc2 swModel;
try
{
swModel = swApp.IActiveDoc2;
}
catch (Exception)
{
swModel = swApp.IActiveDoc2;
}
if (swModel == null)
{
return;
}
var modelName = swModel.GetTitle();
try
{
IPartDoc partDoc;
try
{
partDoc = (IPartDoc)((ModelDoc2)swModel);
}
catch (Exception)
{
return;
}
bool sheetMetal = false;
try
{
sheetMetal = Part.IsSheetMetal(partDoc);
}
catch (Exception)
{
}
if (!sheetMetal)
{
//swApp.CloseDoc(Path.GetFileName(swModel.GetPathName()));
//13.10.2016
swApp.CloseAllDocuments(true);
//swApp.ExitApp();
return;
}
var activeconfiguration = (Configuration)swModel.GetActiveConfiguration();
var swModelConfNames = (string[])swModel.GetConfigurationNames();
foreach (var name in from name in swModelConfNames
let config = (Configuration)swModel.GetConfigurationByName(name)
where config.IsDerived()
select name)
{
swModel.DeleteConfiguration(name);
}
var swModelDocExt = swModel.Extension;
var swModelConfNames2 = (string[])swModel.GetConfigurationNames();
// Проход по всем родительским конфигурациям
var dataList = new List <DataToExport>();
var filePath = swModel.GetPathName();
foreach (var configName in from name in swModelConfNames2
let config = (Configuration)swModel.GetConfigurationByName(name)
where !config.IsDerived()
select name)
{
// swModel.ShowConfiguration2(configName);
swModel.EditRebuild3();
AddDimentions(swModel, configName, out exception);
var confiData = new DataToExport
{
Config = configName,
FileName = filePath.Substring(filePath.LastIndexOf('\\') + 1),
IdPdm = idPdm
};
#region азгибание всех сгибов
try
{
swModel.EditRebuild3();
List <PartBendInfo> list;
Bends.Fix(swApp, out list, false);
}
catch (Exception)
{
//
}
#endregion
swModel.ForceRebuild3(false);
var swCustProp = swModelDocExt.CustomPropertyManager[configName];
string valOut;
string materialId;
swCustProp.Get4("MaterialID", true, out valOut, out materialId);
if (string.IsNullOrEmpty(materialId))
{
confiData.MaterialId = null;
}
else
{
confiData.MaterialId = int.Parse(materialId);
}
string paintX;
swCustProp.Get4("Длина", true, out valOut, out paintX);
if (string.IsNullOrEmpty(paintX))
{
confiData.PaintX = null;
}
else
{
confiData.PaintX = double.Parse(paintX);
}
string paintY;
swCustProp.Get4("Ширина", true, out valOut, out paintY);
if (string.IsNullOrEmpty(paintY))
{
confiData.PaintY = null;
}
else
{
confiData.PaintY = double.Parse(paintY);
}
string paintZ;
swCustProp.Get4("Высота", true, out valOut, out paintZ);
if (string.IsNullOrEmpty(paintZ))
{
confiData.PaintZ = null;
}
else
{
confiData.PaintZ = double.Parse(paintZ);
}
string codMaterial;
swCustProp.Get4("Код материала", true, out valOut, out codMaterial);
confiData.КодМатериала = codMaterial;
string материал;
swCustProp.Get4("Материал", true, out valOut, out материал);
confiData.Материал = материал;
string обозначение;
swCustProp.Get4("Обозначение", true, out valOut, out обозначение);
confiData.Обозначение = обозначение;
var swCustPropForDescription = swModelDocExt.CustomPropertyManager[""];
string наименование;
swCustPropForDescription.Get4("Наименование", true, out valOut, out наименование);
confiData.Наименование = наименование;
//UpdateCustomPropertyListFromCutList
const string длинаГраничнойРамкиName = @"Длина граничной рамки";
const string длинаГраничнойРамкиName2 = @"Bounding Box Length";
const string ширинаГраничнойРамкиName = @"Ширина граничной рамки";
const string ширинаГраничнойРамкиName2 = @"Bounding Box Width";
const string толщинаЛистовогоМеталлаNAme = @"Толщина листового металла";
const string толщинаЛистовогоМеталлаNAme2 = @"Sheet Metal Thickness";//Sheet Metal Thickness
const string сгибыName = @"Сгибы";
const string сгибыName2 = @"Bends";
const string площадьПокрытияName = @"Площадь покрытия";
const string площадьПокрытияName2 = @"Bounding Box Area";
Feature swFeat2 = swModel.FirstFeature();
while (swFeat2 != null)
{
if (swFeat2.GetTypeName2() == "SolidBodyFolder")
{
// List<Bends.SolidWorksFixPattern.PartBendInfo> list;
// Bends.Fix(swApp, out list, false);
BodyFolder swBodyFolder = swFeat2.GetSpecificFeature2();
swFeat2.Select2(false, -1);
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.UpdateCutList();
Feature swSubFeat = swFeat2.GetFirstSubFeature();
while (swSubFeat != null)
{
if (swSubFeat.GetTypeName2() == "CutListFolder")
{
BodyFolder bodyFolder = swSubFeat.GetSpecificFeature2();
if (bodyFolder.GetCutListType() != (int)swCutListType_e.swSheetmetalCutlist)
{
goto m1;
}
swSubFeat.Select2(false, -1);
bodyFolder.SetAutomaticCutList(true);
bodyFolder.UpdateCutList();
var swCustPrpMgr = swSubFeat.CustomPropertyManager;
swCustPrpMgr.Add("Площадь поверхности", "Текст",
"\"SW-SurfaceArea@@@Элемент списка вырезов1@" +
Path.GetFileName(swModel.GetPathName()) + "\"");
string длинаГраничнойРамки;
swCustPrpMgr.Get4(длинаГраничнойРамкиName, true, out valOut,
out длинаГраничнойРамки);
if (string.IsNullOrEmpty(длинаГраничнойРамки))
{
swCustPrpMgr.Get4(длинаГраничнойРамкиName2, true, out valOut,
out длинаГраничнойРамки);
}
swCustProp.Set(длинаГраничнойРамкиName, длинаГраничнойРамки);
confiData.ДлинаГраничнойРамки = длинаГраничнойРамки;
string ширинаГраничнойРамки;
swCustPrpMgr.Get4(ширинаГраничнойРамкиName, true, out valOut,
out ширинаГраничнойРамки);
if (string.IsNullOrEmpty(ширинаГраничнойРамки))
{
swCustPrpMgr.Get4(ширинаГраничнойРамкиName2, true, out valOut,
out ширинаГраничнойРамки);
}
swCustProp.Set(ширинаГраничнойРамкиName, ширинаГраничнойРамки);
confiData.ШиринаГраничнойРамки = ширинаГраничнойРамки;
string толщинаЛистовогоМеталла;
swCustPrpMgr.Get4(толщинаЛистовогоМеталлаNAme, true, out valOut,
out толщинаЛистовогоМеталла);
if (string.IsNullOrEmpty(толщинаЛистовогоМеталла))
{
swCustPrpMgr.Get4(толщинаЛистовогоМеталлаNAme2, true, out valOut,
out толщинаЛистовогоМеталла);
}
swCustProp.Set(толщинаЛистовогоМеталлаNAme, толщинаЛистовогоМеталла);
confiData.ТолщинаЛистовогоМеталла = толщинаЛистовогоМеталла;
string сгибы;
swCustPrpMgr.Get4(сгибыName, true, out valOut, out сгибы);
if (string.IsNullOrEmpty(сгибы))
{
swCustPrpMgr.Get4(сгибыName2, true, out valOut, out сгибы);
}
swCustProp.Set(сгибыName, сгибы);
confiData.Сгибы = сгибы;
var myMassProp = swModel.Extension.CreateMassProperty();
var площадьПоверхности =
Convert.ToString(Math.Round(myMassProp.SurfaceArea * 1000) / 1000);
swCustProp.Set(площадьПокрытияName, площадьПоверхности);
try
{
confiData.ПлощадьПокрытия =
double.Parse(площадьПоверхности.Replace(".", ","));
}
catch (Exception e)
{
exception = e;
}
}
m1:
swSubFeat = swSubFeat.GetNextFeature();
}
}
swFeat2 = swFeat2.GetNextFeature();
}
dataList.Add(confiData);
}
swModel.ShowConfiguration2(activeconfiguration.Name);
ExportDataToXmlSql(swModel.GetTitle().ToUpper().Replace(".SLDPRT", ""), dataList, out exception);
#endregion
if (!closeDoc)
{
return;
}
var namePrt = swApp.IActiveDoc2.GetTitle().ToLower().Contains(".sldprt")
? swApp.IActiveDoc2.GetTitle()
: swApp.IActiveDoc2.GetTitle() + ".sldprt";
swApp.CloseDoc(namePrt);
}
catch (Exception e)
{
exception = e;
}
finally
{
swApp.CloseDoc(Path.GetFileName(swModel.GetPathName()));
}
}
public ListeLgProfil Analyser()
{
InitTime();
try
{
listeElement = new ListeElement(LgBarre);
eTypeCorps Filtre = PrendreEnCompteTole ? eTypeCorps.Barre | eTypeCorps.Tole : eTypeCorps.Barre;
HashSet <String> HashMateriaux = new HashSet <string>(ListeMateriaux);
var dic = MdlBase.DenombrerDossiers(ComposantsExterne,
fDossier =>
{
BodyFolder swDossier = fDossier.GetSpecificFeature2();
if (Filtre.HasFlag(swDossier.eTypeDeDossier()) && HashMateriaux.Contains(swDossier.eGetMateriau()))
{
return(true);
}
return(false);
}
);
foreach (var mdl in dic.Keys)
{
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
foreach (var NomConfigPliee in dic[mdl].Keys)
{
mdl.ShowConfiguration2(NomConfigPliee);
mdl.EditRebuild3();
PartDoc Piece = mdl.ePartDoc();
var ListeDossier = dic[mdl][NomConfigPliee];
foreach (var t in ListeDossier)
{
var IdDossier = t.Key;
var QuantiteBarre = t.Value * Quantite;
Feature fDossier = Piece.FeatureById(IdDossier);
BodyFolder dossier = fDossier.GetSpecificFeature2();
var RefDossier = dossier.eProp(CONSTANTES.REF_DOSSIER);
String Profil = dossier.eProp(CONSTANTES.PROFIL_NOM);
Double Longueur = dossier.eProp(CONSTANTES.PROFIL_LONGUEUR).eToDouble();
Double A = dossier.eProp(CONSTANTES.PROFIL_ANGLE1).eToDouble();
Double B = dossier.eProp(CONSTANTES.PROFIL_ANGLE2).eToDouble();
if (String.IsNullOrWhiteSpace(Profil) || (Longueur == 0))
{
continue;
}
if (String.IsNullOrWhiteSpace(RefDossier))
{
WindowLog.EcrireF("{0}-{1}-{2} : Pas de reférence profil", mdl.eNomSansExt(), NomConfigPliee, fDossier.Name);
continue;
}
var Materiau = dossier.ePremierCorps().eGetMateriauCorpsOuPiece(Piece, NomConfigPliee);
if (!HashMateriaux.Contains(Materiau))
{
continue;
}
Materiau = ForcerMateriau.IsRefAndNotEmpty(Materiau);
listeElement.AjouterElement(QuantiteBarre, RefDossier, Materiau, Profil, Longueur, A, B);
}
}
}
ExecuterEn();
return(listeElement.ListeLgProfil);
}
catch (Exception e)
{
this.LogErreur(new Object[] { e });
}
return(null);
}
/// <summary>
/// 天花子装配导出DXF图纸
/// </summary>
/// <param name="swApp"></param>
/// <param name="tree"></param>
/// <param name="dxfPath"></param>
/// <param name="userId"></param>
public void CeilingAssyToDxf(SldWorks swApp, SubAssy subAssy, string dxfPath, int userId)
{
swApp.CommandInProgress = true;
List <CeilingCutList> celingCutLists = new List <CeilingCutList>();
string assyPath = subAssy.SubAssyPath;
if (assyPath.Length == 0)
{
return;
}
try
{
//打开模型
ModelDoc2 swModel = swApp.OpenDoc6(assyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
if (swModel == null)
{
MessageBox.Show("模型不存在，请认真检查", "模型不存在");
return;
}
string modulePath = dxfPath + @"\" + subAssy.SubAssyName;
if (!Directory.Exists(modulePath))
{
Directory.CreateDirectory(modulePath);
}
swModel.ForceRebuild3(true);
AssemblyDoc swAssy = swModel as AssemblyDoc;
//获取所有零部件集合
var compList = swAssy.GetComponents(false);
//遍历集合中的所有零部件对象
foreach (var swComp in compList)
{
//判断零件是否被压缩，不显示，封套，零件名称不是以sldprt或SLDPRT结尾
if (swComp.Visible == 1 && !swComp.IsEnvelope() && !swComp.IsSuppressed() &&
(swComp.GetPathName().EndsWith(".sldprt") || swComp.GetPathName().EndsWith(".SLDPRT")))
{
Component2 swParentComp = swComp.GetParent();
//总装没有父装配体
if (swParentComp == null)
{
ConfigurationManager swConfigMgr = swModel.ConfigurationManager;
Configuration swConfig2 = swConfigMgr.ActiveConfiguration;
swParentComp = swConfig2.GetRootComponent3(true);
}
//判断父装配体是否可视，并且不封套
if (swParentComp.Visible == 1 && !swParentComp.IsEnvelope() && !swComp.IsSuppressed())
{
PartDoc swPart = swComp.GetModelDoc2();
//获取文档中的额Body对象集合
var bodyList = swPart.GetBodies2(0, false);
//遍历集合中的所有Body对象,判断是否为钣金
foreach (var swBody in bodyList)
{
//如果是钣金则将零件地址添加到列表中
if (swBody.IsSheetMetal())
{
if (sheetMetaDic.ContainsKey(swComp.GetPathName()))
{
sheetMetaDic[swComp.GetPathName()] += 1;
}
else
{
sheetMetaDic.Add(swComp.GetPathName(), 1);
}
}
}
}
}
}
//关闭装配体零件
swApp.CloseDoc(assyPath);
//遍历钣金零件
foreach (var sheetMeta in sheetMetaDic)
{
//打开模型
ModelDoc2 swPart = swApp.OpenDoc6(sheetMeta.Key, (int)swDocumentTypes_e.swDocPART,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
Feature swFeat = (Feature)swPart.FirstFeature();
CeilingCutList cutRecord = new CeilingCutList()
{
SubAssyId = subAssy.SubAssyId,
Quantity = sheetMeta.Value,
UserId = userId
};
while (swFeat != null)
{
var suppStatus = swFeat.IsSuppressed2((int)swInConfigurationOpts_e.swThisConfiguration, null);
if (suppStatus[0] == false && swFeat.GetTypeName() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = (BodyFolder)swFeat.GetSpecificFeature2();
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.SetAutomaticUpdate(true);
Feature SubFeat = swFeat.GetFirstSubFeature();
if (SubFeat != null)
{
Feature ownerFeature = SubFeat.GetOwnerFeature();
BodyFolder swSubBodyFolder = ownerFeature.GetSpecificFeature2();
swSubBodyFolder.UpdateCutList();
string val = string.Empty;
string valout = string.Empty;
bool wasResolved = false;
bool linkToProp = false;
SubFeat.CustomPropertyManager.Get4("Bounding Box Length", false, out val, out valout);
cutRecord.Length = Convert.ToDecimal(valout);
SubFeat.CustomPropertyManager.Get4("Bounding Box Width", false, out val, out valout);
cutRecord.Width = Convert.ToDecimal(valout);
SubFeat.CustomPropertyManager.Get4("Sheet Metal Thickness", false, out val, out valout);
cutRecord.Thickness = Convert.ToDecimal(valout);
SubFeat.CustomPropertyManager.Get4("Material", false, out val, out valout);
cutRecord.Materials = valout;
swPart.GetActiveConfiguration().CustomPropertyManager.Get6("Description", false, out valout, out val, out wasResolved, out linkToProp);
cutRecord.PartDescription = valout;
cutRecord.PartNo = swPart.GetTitle().Substring(0, swPart.GetTitle().Length - 7);
celingCutLists.Add(cutRecord);//将信息添加到集合中
}
}
swFeat = swFeat.GetNextFeature();
}
PartToDxf(swApp, swPart, modulePath);
//关闭零件
swApp.CloseDoc(sheetMeta.Key);
}
}
catch (Exception ex)
{
throw new Exception(assyPath + "导图过程发生异常，详细：" + ex.Message);
}
finally
{
sheetMetaDic.Clear();
swApp.CloseDoc(assyPath); //关闭，很快
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
//基于事务ceilingCutLists提交SQLServer
if (celingCutLists.Count == 0)
{
return;
}
try
{
if (objCeilingCutListService.ImportCutList(celingCutLists))
{
celingCutLists.Clear();
}
}
catch (Exception ex)
{
throw new Exception("Cutlist导入数据库失败" + ex.Message);
}
}
protected override void Command()
{
try
{
int NbDvp = 0;
var dic = MdlBase.ListerComposants(false);
int MdlPct = 0;
foreach (var mdl in dic.Keys)
{
WindowLog.SautDeLigne();
WindowLog.EcrireF("[{1}/{2}] {0}", mdl.eNomSansExt(), ++MdlPct, dic.Count);
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
var cfgActive = mdl.eNomConfigActive();
var ListeNomConfigs = dic[mdl];
if (ToutesLesConfigurations)
{
mdl.eParcourirConfiguration(
(String c) =>
{
if (c.eEstConfigPliee() && !ListeNomConfigs.ContainsKey(c))
{
ListeNomConfigs.Add(c, 1);
}
return(false);
}
);
}
if (MasquerEsquisses)
{
cmdMasquerEsquisses(mdl);
}
if (SupprimerLesAnciennesConfigs)
{
cmdSupprimerLesAnciennesConfigs(mdl);
}
if (!mdl.Extension.LinkedDisplayState)
{
mdl.Extension.LinkedDisplayState = true;
foreach (var c in mdl.eListeConfigs(eTypeConfig.Tous))
{
c.eRenommerEtatAffichage();
}
}
int CfgPct = 0;
foreach (var NomConfigPliee in ListeNomConfigs.Keys)
{
WindowLog.SautDeLigne();
WindowLog.EcrireF(" [{1}/{2}] Config : \"{0}\"", NomConfigPliee, ++CfgPct, ListeNomConfigs.Count);
mdl.ShowConfiguration2(NomConfigPliee);
mdl.EditRebuild3();
if (SupprimerFonctions)
{
cmdSupprimerFonctions(mdl, NomConfigPliee);
}
PartDoc Piece = mdl.ePartDoc();
var ListeDossier = Piece.eListePIDdesFonctionsDePiecesSoudees(
swD =>
{
BodyFolder dossier = swD.GetSpecificFeature2();
if (dossier.eEstExclu() || dossier.IsNull() || (dossier.GetBodyCount() == 0) || dossier.eTypeDeDossier() != eTypeCorps.Tole)
{
return(false);
}
return(true);
}
);
for (int noD = 0; noD < ListeDossier.Count; noD++)
{
var f = ListeDossier[noD];
BodyFolder dossier = f.GetSpecificFeature2();
var RefDossier = dossier.eProp(CONSTANTES.REF_DOSSIER);
Body2 Tole = dossier.eCorpsDeTolerie();
var pidTole = new SwObjectPID <Body2>(Tole, MdlBase);
String NomConfigDepliee = Sw.eNomConfigDepliee(NomConfigPliee, RefDossier);
WindowLog.EcrireF(" - [{1}/{2}] Dossier : \"{0}\" -> {3}", f.Name, noD + 1, ListeDossier.Count, NomConfigDepliee);
Configuration CfgDepliee = null;
if (ReconstuireLesConfigs)
{
CfgDepliee = MdlBase.GetConfigurationByName(NomConfigDepliee);
}
if (CfgDepliee.IsNull())
{
CfgDepliee = mdl.CreerConfigDepliee(NomConfigDepliee, NomConfigPliee);
}
else if (!ReconstuireLesConfigs)
{
continue;
}
if (CfgDepliee.IsNull())
{
WindowLog.Ecrire(" - Config non crée");
continue;
}
NbDvp++;
try
{
mdl.ShowConfiguration2(NomConfigDepliee);
// On ajoute le numero de la config parent aux propriétés de la configuration depliée
CfgDepliee.CustomPropertyManager.Add3(CONSTANTES.NO_CONFIG, (int)swCustomInfoType_e.swCustomInfoText, NomConfigPliee, (int)swCustomPropertyAddOption_e.swCustomPropertyDeleteAndAdd);
pidTole.Maj(ref Tole);
Tole.DeplierTole(mdl, NomConfigDepliee);
}
catch (Exception e)
{
DicErreur.Add(mdl.eNomSansExt() + " -> cfg : " + NomConfigPliee + " - No : " + RefDossier + " = " + NomConfigDepliee);
WindowLog.Ecrire("Erreur de depliage");
this.LogMethode(new Object[] { e });
}
try
{
mdl.ShowConfiguration2(NomConfigPliee);
pidTole.Maj(ref Tole);
Tole.PlierTole(mdl, NomConfigPliee);
}
catch (Exception e)
{
WindowLog.Ecrire("Erreur de repliage");
this.LogMethode(new Object[] { e });
}
}
}
mdl.ShowConfiguration2(cfgActive);
WindowLog.SautDeLigne();
mdl.eFermerSiDifferent(MdlBase);
}
if (DicErreur.Count > 0)
{
WindowLog.SautDeLigne();
WindowLog.Ecrire("Liste des erreurs :");
foreach (var item in DicErreur)
{
WindowLog.Ecrire(" - " + item);
}
WindowLog.SautDeLigne();
}
else
{
WindowLog.Ecrire("Pas d'erreur");
}
WindowLog.SautDeLigne();
WindowLog.Ecrire("Resultat :");
WindowLog.Ecrire("----------------");
WindowLog.EcrireF(" {0} dvp crées", NbDvp);
File.WriteAllText(Path.Combine(MdlBase.eDossier(), "Log_CreerConfigDvp.txt"), WindowLog.Resume);
MdlBase.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
MdlBase.ShowConfiguration2(nomConfigBase);
MdlBase.EditRebuild3();
}
catch (Exception e)
{
this.LogErreur(new Object[] { e });
}
}
//public static IEdmObject5 GetObject(IEdmVault12 vault, int objectId, EdmObjectType objectType)
//{
// try
// {
// var obj = vault.GetObject(objectType, objectId);
// return obj;
// }
// catch (Exception e)
// {
// Console.WriteLine("Ошибка в процедуре public static IEdmObject5 GetObject {0}:", e);
// }
// foreach (EdmObjectType enumObjectType in Enum.GetValues(typeof(EdmObjectType)))
// {
// try
// {
// var obj = vault.GetObject(enumObjectType, objectId);
// return obj;
// }
// catch (Exception e)
// {
// Console.WriteLine("Ошибка в процедуре public static IEdmObject5 GetObject {0}:", e);
// }
// }
// //nothing found
// return null;
//}
static void CreateFlattPatternUpdateCutlist(string filePath, bool savedxf)
{
//var vault1 = new EdmVault5();
//IEdmFolder5 oFolder;
//vault1.LoginAuto("Vents-PDM", 0);
//var edmFile5 = vault1.GetFileFromPath("D:\\Vents-PDM\\Библиотека проектирования\\Templates\\flattpattern.drwdot", out oFolder);
//edmFile5.GetFileCopy(0, 0, oFolder.ID, (int)EdmGetFlag.EdmGet_Simple);
try
{
SwApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
}
catch (Exception)
{
SwApp = new SldWorks {
Visible = true
};
}
if (SwApp == null)
{
return;
}
var swModel = SwApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocPART,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", 0, 0);
SwApp.SetUserPreferenceStringValue(((int)(swUserPreferenceStringValue_e.swFileLocationsDocumentTemplates)), "D:\\Vents-PDM\\Библиотека проектирования\\Templates\\");
try
{
if (!IsSheetMetalPart((IPartDoc)swModel))
{
SwApp.CloseDoc(swModel.GetTitle());
return;
}
}
catch (Exception)
{
return;
}
var activeconfiguration = (Configuration)swModel.GetActiveConfiguration();
var swModelConfNames = (string[])swModel.GetConfigurationNames();
foreach (var name in from name in swModelConfNames
let config = (Configuration)swModel.GetConfigurationByName(name)
where config.IsDerived()
select name)
{
swModel.DeleteConfiguration(name);
}
var swModelDocExt = swModel.Extension;
var swModelConfNames2 = (string[])swModel.GetConfigurationNames();
// Проход по всем родительским конфигурациям (т.е. - конфигурациям деталей)
var dataList = new List <DataToExport>();
foreach (var configName in from name in swModelConfNames2
let config = (Configuration)swModel.GetConfigurationByName(name)
where !config.IsDerived()
select name)
{
swModel.ShowConfiguration2(configName); swModel.EditRebuild3();
var confiData = new DataToExport {
Config = configName
};
var swDraw =
(DrawingDoc)SwApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateA0size, "D:\\Vents-PDM\\Библиотека проектирования\\Templates\\flattpattern.drwdot",// "D:\\Vents-PDM\\Библиотека проектирования\\Templates\\flattpattern.drwdot",
(int)swDwgPaperSizes_e.swDwgPaperA0size, 0.841, 0.594);
swDraw.CreateFlatPatternViewFromModelView3(swModel.GetPathName(), configName, 0.841 / 2, 0.594 / 2, 0, true, true);
swModel.ForceRebuild3(false);
var swCustProp = swModelDocExt.CustomPropertyManager[configName];
string valOut;
string codMaterial;
swCustProp.Get4("Код материала", true, out valOut, out codMaterial);
confiData.КодМатериала = codMaterial;
string материал;
swCustProp.Get4("Материал", true, out valOut, out материал);
confiData.Материал = материал;
string обозначение;
swCustProp.Get4("Обозначение", true, out valOut, out обозначение);
confiData.Обозначение = обозначение;
var swCustPropForDescription = swModelDocExt.CustomPropertyManager[""];
string наименование;
swCustPropForDescription.Get4("Наименование", true, out valOut, out наименование);
confiData.Наименование = наименование;
if (savedxf)
{
var newDxf = (IModelDoc2)swDraw;
SwApp.CloseDoc(newDxf.GetPathName());
}
else
{
var newDxf = (IModelDoc2)swDraw;
SwApp.CloseDoc(newDxf.GetTitle());
}
//UpdateCustomPropertyListFromCutList
const string длинаГраничнойРамкиName = "Длина граничной рамки";
const string ширинаГраничнойРамкиName = "Ширина граничной рамки";
const string толщинаЛистовогоМеталлаNAme = "Толщина листового металла";
const string сгибыName = "Сгибы";
const string площадьПокрытияName = "Площадь покрытия";
Feature swFeat2 = swModel.FirstFeature();
while (swFeat2 != null)
{
if (swFeat2.GetTypeName2() == "SolidBodyFolder")
{
BodyFolder swBodyFolder = swFeat2.GetSpecificFeature2();
swFeat2.Select2(false, -1);
swBodyFolder.SetAutomaticCutList(true);
swBodyFolder.UpdateCutList();
Feature swSubFeat = swFeat2.GetFirstSubFeature();
while (swSubFeat != null)
{
if (swSubFeat.GetTypeName2() == "CutListFolder")
{
BodyFolder bodyFolder = swSubFeat.GetSpecificFeature2();
swSubFeat.Select2(false, -1);
bodyFolder.SetAutomaticCutList(true);
bodyFolder.UpdateCutList();
var swCustPrpMgr = swSubFeat.CustomPropertyManager;
swCustPrpMgr.Add("Площадь поверхности", "Текст", "\"SW-SurfaceArea@@@Элемент списка вырезов1@" + Path.GetFileName(swModel.GetPathName()) + "\"");
string длинаГраничнойРамки;
swCustPrpMgr.Get4(длинаГраничнойРамкиName, true, out valOut, out длинаГраничнойРамки);
swCustProp.Set(длинаГраничнойРамкиName, длинаГраничнойРамки);
confiData.ДлинаГраничнойРамки = длинаГраничнойРамки;
string ширинаГраничнойРамки;
swCustPrpMgr.Get4(ширинаГраничнойРамкиName, true, out valOut, out ширинаГраничнойРамки);
swCustProp.Set(ширинаГраничнойРамкиName, ширинаГраничнойРамки);
confiData.ШиринаГраничнойРамки = ширинаГраничнойРамки;
string толщинаЛистовогоМеталла;
swCustPrpMgr.Get4(толщинаЛистовогоМеталлаNAme, true, out valOut, out толщинаЛистовогоМеталла);
swCustProp.Set(толщинаЛистовогоМеталлаNAme, толщинаЛистовогоМеталла);
confiData.ТолщинаЛистовогоМеталла = толщинаЛистовогоМеталла;
string сгибы;
swCustPrpMgr.Get4(сгибыName, true, out valOut, out сгибы);
swCustProp.Set(сгибыName, сгибы);
confiData.Сгибы = сгибы;
string площадьПоверхности;
swCustPrpMgr.Get4("Площадь поверхности", true, out valOut, out площадьПоверхности);
swCustProp.Set(площадьПокрытияName, площадьПоверхности);
confiData.ПлощадьПокрытия = площадьПоверхности;
}
swSubFeat = swSubFeat.GetNextFeature();
}
}
swFeat2 = swFeat2.GetNextFeature();
}
dataList.Add(confiData);
}
swModel.ShowConfiguration2(activeconfiguration.Name);
//GetXml(swModel);
ExportDataToXmlSql(swModel, dataList);
SwApp.CloseDoc(swModel.GetTitle());
}
/// <summary>
/// Renvoi la liste des modeles avec la liste des configurations, des dossiers
/// et les quantites de chaque dossier dans l'assemblage
/// Modele : ModelDoc2
/// |-Config1 : Nom de la configuration
/// | |-Dossier1 : Comparaison avec la propriete RefDossier, référence à l'Id de la fonction pour pouvoir le selectionner plus tard
/// | | |- Nb : quantite de corps identique dans le modele complet
/// | |
/// | |-Dossier2
/// | |- Nb
/// |-Config 2
/// | etc...
/// </summary>
/// <param name="mdlBase"></param>
/// <param name="composantsExterne"></param>
/// <param name="filtreDossier"></param>
/// <returns></returns>
public static SortedDictionary <ModelDoc2, SortedDictionary <String, SortedDictionary <int, int> > > DenombrerDossiers(this ModelDoc2 mdlBase, Boolean composantsExterne, Predicate <Feature> filtreDossier = null, Boolean fermerFichier = false)
{
SortedDictionary <ModelDoc2, SortedDictionary <String, SortedDictionary <int, int> > > dic = new SortedDictionary <ModelDoc2, SortedDictionary <String, SortedDictionary <int, int> > >(new CompareModelDoc2());
try
{
var ListeComposants = mdlBase.ListerComposants(composantsExterne);
var ListeDossiers = new Dictionary <String, Dossier>();
Predicate <Feature> Test = delegate(Feature fDossier)
{
BodyFolder SwDossier = fDossier.GetSpecificFeature2();
if (SwDossier.IsRef() && SwDossier.eNbCorps() > 0 && !SwDossier.eEstExclu() && (filtreDossier.IsNull() || filtreDossier(fDossier)))
{
return(true);
}
return(false);
};
foreach (var mdl in ListeComposants.Keys)
{
mdl.eActiver(swRebuildOnActivation_e.swRebuildActiveDoc);
foreach (var t in ListeComposants[mdl])
{
var cfg = t.Key;
var nbCfg = t.Value;
mdl.ShowConfiguration2(cfg);
mdl.EditRebuild3();
var Piece = mdl.ePartDoc();
foreach (var fDossier in Piece.eListeDesFonctionsDePiecesSoudees(Test))
{
BodyFolder SwDossier = fDossier.GetSpecificFeature2();
var RefDossier = SwDossier.eProp(CONSTANTES.REF_DOSSIER);
if (ListeDossiers.ContainsKey(RefDossier))
{
ListeDossiers[RefDossier].Nb += SwDossier.eNbCorps() * nbCfg;
}
else
{
var dossier = new Dossier(RefDossier, mdl, cfg, fDossier.GetID());
dossier.Nb = SwDossier.eNbCorps() * nbCfg;
ListeDossiers.Add(RefDossier, dossier);
}
}
}
if (fermerFichier)
{
mdl.eFermerSiDifferent(mdlBase);
}
;
}
// Conversion d'une liste de dossier
// en liste de modele
foreach (var dossier in ListeDossiers.Values)
{
if (dic.ContainsKey(dossier.Mdl))
{
var lcfg = dic[dossier.Mdl];
if (lcfg.ContainsKey(dossier.Config))
{
var ldossier = lcfg[dossier.Config];
ldossier.Add(dossier.Id, dossier.Nb);
}
else
{
var ldossier = new SortedDictionary <int, int>();
ldossier.Add(dossier.Id, dossier.Nb);
lcfg.Add(dossier.Config, ldossier);
}
}
else
{
var ldossier = new SortedDictionary <int, int>();
ldossier.Add(dossier.Id, dossier.Nb);
var lcfg = new SortedDictionary <String, SortedDictionary <int, int> >(new WindowsStringComparer());
lcfg.Add(dossier.Config, ldossier);
dic.Add(dossier.Mdl, lcfg);
}
}
}
catch (Exception e) { Log.LogErreur(new Object[] { e }); }
return(dic);
}
