/// <summary>
/// 项目扣分
/// </summary>
/// <param name="kch">考车号</param>
/// <param name="xmbh">项目编号，包含项目编号和错误编号，用@分隔</param>
/// <param name="time">时间</param>
/// <returns></returns>
private bool HandleM17C53(int kch, string xmbh, string time)
{
string errorMsg = string.Empty;
string[] strArray = BaseMethod.SplitString(xmbh, BaseDefine.SPLIT_CHAR_AT, out errorMsg);
if (!string.IsNullOrEmpty(errorMsg) || strArray.Length != 2)
{
Log.GetLogger().ErrorFormat("17C53 接口存在错误，{0}", errorMsg);
return(false);
}
string strXmCode = strArray[0];
string strErrrorCode = strArray[1];
int xmCode = string.IsNullOrEmpty(strXmCode) ? 0 : int.Parse(strXmCode);
int kskm = BaseMethod.INIGetIntValue(BaseDefine.CONFIG_FILE_PATH_ENV, BaseDefine.CONFIG_SECTION_CONFIG,
BaseDefine.CONFIG_KEY_KSKM, 0); //考试科目
string xmName = string.Empty; //项目名称
if (BaseDefine.CONFIG_VALUE_KSKM_3 == kskm) //科目三
{
xmName = GetKM3Name(xmCode);
}
else //科目二
{
xmName = GetKM2Name(xmCode);
}
//扣分类型、扣除分数
if (!m_dicJudgeRules.ContainsKey(strErrrorCode))
{
Log.GetLogger().ErrorFormat("数据库扣分规则表中不存在错误编号为 {0} 的记录，请检查配置。", strErrrorCode);
return(false);
}
string kflx = m_dicJudgeRules[strErrrorCode].JudgementType;
int kcfs = m_dicJudgeRules[strErrrorCode].Points;
if (!m_dicExamProcedures.ContainsKey(kch))
{
Log.GetLogger().ErrorFormat("m_dicExamProcedures 字典找不到考车号 : {0}", kch);
return(false);
}
ExamProcedure examProcedure = m_dicExamProcedures[kch];
if (!examProcedure.Handle17C53(xmName, kflx, kcfs))
{
Log.GetLogger().ErrorFormat("examProcedure.Handle17C53 failed, kch={0}", kch);
return(false);
}
Log.GetLogger().InfoFormat("HandleM17C53 end, kch={0}, xmName={1}, kflx={2}, kcfs={3}", kch, xmName, kflx, kcfs);
return(true);
}
//设置串口参数
public override void SetCom(ComParam param)
{
if (string.IsNullOrEmpty(param.Com) || param.Rate <= 0)
{
logger.ErrorFormat("SetCom param error, portname={0}, baudrate={1}", param.Com, param.Rate);
return;
}
string errorMsg = string.Empty;
signalData = BaseMethod.SplitString(param.Pwd, ',', out errorMsg);
if (!string.IsNullOrEmpty(errorMsg))
{
logger.ErrorFormat("SetCom param error, pwd={0}", param.Pwd);
return;
}
com = new BekUtils.Communication.ComUtil(param.Com, param.Rate, param.DataBits);
}
//采样线程函数
private void SampleThreadProc()
{
while (true)
{
#region 连接串口
if (!com.IsOpen)
{
int nRet = com.ConnectSerialPort();
if (-1 == nRet)
{
logger.ErrorFormat("ConnectSerialPort faild, retry after sleep");
Thread.Sleep(BaseDefine.COMMON_VALUE_SLEEP_2500);
continue;
}
else if (-2 == nRet)
{
logger.ErrorFormat("ConnectSerialPort faild, abort sample thread");
sampleThread.Abort();
return;
}
}
#endregion
//读 OBD 数据
string errorMsg = string.Empty;
string retStr = string.Empty;
int nLen = com.ReadSerialPort(ref retStr);
string[] destList = BaseMethod.SplitString(retStr, '$', out errorMsg);
if (!string.IsNullOrEmpty(errorMsg))
{
logger.ErrorFormat(errorMsg);
Thread.Sleep(BaseDefine.COMMON_VALUE_SLEEP_200);
continue;
}
//解析 OBD 数据
for (int i = 0; i < destList.Length; i++)
{
string tempError = string.Empty;
string[] dest = BaseMethod.SplitString(destList[i], ',', out tempError);
if (!string.IsNullOrEmpty(tempError))
{
logger.InfoFormat("OBD 存在空数据，destList[{0}]={1}", i, destList[i]);
continue;
}
if (BaseDefine.DATA_TYPE_OBD_DT == dest[0])
{
if (dest.Length >= 22)
{
#region 从协议取值
lock (lockObj)
{
#region 安全带
if ("1" == dest[12])
{
sampleData.Aqd = 1;
}
else if ("#" == dest[12])
{
sampleData.Aqd = 9;
}
else
{
sampleData.Aqd = 0;
}
#endregion
#region 脚刹
if ("1" == dest[7])
{
sampleData.Js = 1;
}
else if ("#" == dest[7])
{
sampleData.Js = 9;
}
else
{
sampleData.Js = 0;
}
#endregion
#region 关门
if ("1" == dest[13])
{
sampleData.Gm = 1;
}
else if ("#" == dest[13])
{
sampleData.Gm = 9;
}
else
{
sampleData.Gm = 0;
}
#endregion
#region 离合
if ("1" == dest[6])
{
sampleData.Lh = 1;
}
else if ("#" == dest[6])
{
sampleData.Lh = 9;
}
else
{
sampleData.Lh = 0;
}
#endregion
#region 左转向灯
if ("1" == dest[14])
{
sampleData.Zzxd = 1;
}
else if ("#" == dest[14])
{
sampleData.Zzxd = 9;
}
else
{
sampleData.Zzxd = 0;
}
#endregion
#region 右转向灯
if ("1" == dest[15])
{
sampleData.Yzxd = 1;
}
else if ("#" == dest[15])
{
sampleData.Yzxd = 9;
}
else
{
sampleData.Yzxd = 0;
}
#endregion
#region 喇叭
if ("1" == dest[10])
{
sampleData.Lb = 1;
}
else if ("#" == dest[10])
{
sampleData.Lb = 9;
}
else
{
sampleData.Lb = 0;
}
#endregion
#region 近光灯
if ("1" == dest[17])
{
sampleData.Jgd = 1;
}
else if ("#" == dest[17])
{
sampleData.Jgd = 9;
}
else
{
sampleData.Jgd = 0;
}
#endregion
#region 远光灯
if ("1" == dest[18])
{
sampleData.Ygd = 1;
}
else if ("#" == dest[18])
{
sampleData.Ygd = 9;
}
else
{
sampleData.Ygd = 0;
}
#endregion
#region 危险告警灯
if ("1" == dest[19])
{
sampleData.Gjd = 1;
}
else if ("#" == dest[19])
{
sampleData.Gjd = 9;
}
else
{
sampleData.Gjd = 0;
}
#endregion
#region 雾灯
if ("1" == dest[20])
{
sampleData.Wd = 1;
}
else if ("#" == dest[20])
{
sampleData.Wd = 9;
}
else
{
sampleData.Wd = 0;
}
#endregion
#region 倒车
if ("1" == dest[21])
{
sampleData.Dc = 1;
}
else if ("#" == dest[21])
{
sampleData.Dc = 9;
}
else
{
sampleData.Dc = 0;
}
#endregion
#region 速度
if ("#" == dest[3])
{
sampleData.Ycsd = -1;
}
else
{
float fSd = 0;
float.TryParse(dest[3], out fSd);
sampleData.Ycsd = fSd;
}
#endregion
#region 转速
if ("#" == dest[2])
{
sampleData.Zs = -1;
}
else
{
int nZs = 0;
int.TryParse(dest[2], out nZs);
sampleData.Zs = nZs;
}
#endregion
#region 档位
if (BaseDefine.DATA_TYPE_DW_MN == dest[5] || BaseDefine.DATA_TYPE_DW_AN == dest[5])
{
sampleData.Dw = (byte)DwDefine.DW_N;
}
else if (BaseDefine.DATA_TYPE_DW_M1 == dest[5] || BaseDefine.DATA_TYPE_DW_A1 == dest[5])
{
sampleData.Dw = (byte)DwDefine.DW_1;
}
else if (BaseDefine.DATA_TYPE_DW_M2 == dest[5] || BaseDefine.DATA_TYPE_DW_A2 == dest[5])
{
sampleData.Dw = (byte)DwDefine.DW_2;
}
else if (BaseDefine.DATA_TYPE_DW_M3 == dest[5] || BaseDefine.DATA_TYPE_DW_A3 == dest[5])
{
sampleData.Dw = (byte)DwDefine.DW_3;
}
else if (BaseDefine.DATA_TYPE_DW_M4 == dest[5] || BaseDefine.DATA_TYPE_DW_A4 == dest[5])
{
sampleData.Dw = (byte)DwDefine.DW_4;
}
else if (BaseDefine.DATA_TYPE_DW_M5 == dest[5] || BaseDefine.DATA_TYPE_DW_A5 == dest[5])
{
sampleData.Dw = (byte)DwDefine.DW_5;
}
else if (BaseDefine.DATA_TYPE_DW_MR == dest[5] || BaseDefine.DATA_TYPE_DW_AR == dest[5])
{
sampleData.Dw = (byte)DwDefine.DW_R;
}
else if (BaseDefine.DATA_TYPE_DW_AP == dest[5])
{
sampleData.Dw = (byte)DwDefine.DW_P;
}
else if (BaseDefine.DATA_TYPE_DW_AD == dest[5])
{
sampleData.Dw = (byte)DwDefine.DW_D;
}
else
{
sampleData.Dw = (byte)DwDefine.DW_OTHER;
}
#endregion
}
#endregion
}
}
else if (BaseDefine.DATA_TYPE_OBD_INFO == dest[0])
{
logger.InfoFormat("dest[0]={0}, continue", BaseDefine.DATA_TYPE_OBD_INFO);
continue;
}
else if (BaseDefine.DATA_TYPE_OBD_IO == dest[0])
{
if (signalData != null && dest.Length >= signalData.Length + 1)
{
tempError = string.Empty;
for (int j = 0; j < signalData.Length; j++)
{
string[] tempSz = BaseMethod.SplitString(signalData[j], '@', out tempError);
if (tempSz != null && tempSz.Length >= 2)
{
#region 从协议取值
lock (lockObj)
{
if ("1" == tempSz[1])
{
if ("1" == tempSz[0])
{
tempSz[0] = "0";
}
else
{
tempSz[0] = "1";
}
}
byte byteTemp;
byte.TryParse(dest[j + 1], out byteTemp);
switch (tempSz[0])
{
case "1": //安全带
sampleData.Aqd = byteTemp;
break;
case "2": //左转向灯
sampleData.Zzxd = byteTemp;
break;
case "3": //右转向灯
sampleData.Yzxd = byteTemp;
break;
case "4": //熄火
sampleData.Yzxd = byteTemp;
break;
case "5": //点火
sampleData.Dh = byteTemp;
break;
case "6": //手刹
sampleData.Ss = byteTemp;
break;
case "7": //右转向灯
sampleData.Yzxd = byteTemp;
break;
case "8": //档位？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？
sampleData.Dw = byteTemp;
break;
case "9": //近光灯
sampleData.Jgd = byteTemp;
break;
case "10": //远光灯
sampleData.Ygd = byteTemp;
break;
case "11": //脚刹
sampleData.Js = byteTemp;
break;
case "12": //倒车
sampleData.Dc = byteTemp;
break;
case "13": //雾灯
sampleData.Wd = byteTemp;
break;
case "14": //喇叭
sampleData.Lb = byteTemp;
break;
case "15": //油箱
sampleData.Yx = byteTemp;
break;
case "16": //副刹
sampleData.Fs = byteTemp;
break;
case "17": //离合
sampleData.Lh = byteTemp;
break;
case "18": //危险告警灯
sampleData.Gjd = byteTemp;
break;
case "19": //示廓灯
sampleData.Skd = byteTemp;
break;
default:
break;
}
}
#endregion
}
}
}
}
}
Thread.Sleep(BaseDefine.COMMON_VALUE_SLEEP_200);
}
}
private void DataHandlerThreadProc()
{
string errorMsg = string.Empty;
//解析车载数据
string[] retArray = BaseMethod.SplitString(m_data, BaseDefine.SPLIT_CHAR_ASTERISK, out errorMsg);
if (!string.IsNullOrEmpty(errorMsg))
{
goto END;
}
int nLength = retArray.Length;
if (nLength != BaseDefine.INTERFACE_FIELD_COUNT_KM2 &&
nLength != BaseDefine.INTERFACE_FIELD_COUNT_KM3)
{
errorMsg = string.Format("车载数据格式不正确，{0} 数量不对", BaseDefine.SPLIT_CHAR_ASTERISK);
goto END;
}
string strKch = retArray[1];
int nKch = string.IsNullOrEmpty(strKch) ? 0 : int.Parse(strKch); //考车号
string strType = retArray[2];
int nType = string.IsNullOrEmpty(strType) ? 0 : int.Parse(strType); //类型
string strXmbh = retArray[5]; //项目编号
string strZkzh = retArray[6]; //准考证号
string strTime = retArray[7]; //时间
if (!m_dicCars.ContainsKey(nKch))
{
Log.GetLogger().ErrorFormat("找不到考车{0}，请检查配置", nKch);
return;
}
Log.GetLogger().InfoFormat(
"接收到车载接口信息，考车号={0}, 类型={1}, 项目编号={2}, 准考证号={3}, 时间={4}",
nKch, nType, strXmbh, strZkzh, strTime);
switch (nType)
{
case BaseDefine.PACK_TYPE_M17C51: //考试开始
{
HandleM17C51(nKch, strZkzh);
}
break;
case BaseDefine.PACK_TYPE_M17C52: //项目开始
{
HandleM17C52(nKch, strZkzh, strXmbh);
}
break;
case BaseDefine.PACK_TYPE_M17C53: //扣分
{
HandleM17C53(nKch, strXmbh, strTime);
}
break;
case BaseDefine.PACK_TYPE_M17C54:
{
//项目抓拍照片，这里不需要处理
}
break;
case BaseDefine.PACK_TYPE_M17C55: //项目完成
{
HandleM17C55(nKch, strZkzh, strXmbh);
}
break;
case BaseDefine.PACK_TYPE_M17C56: //考试完成
{
string score = retArray[5]; //17C56时该字段为考试成绩
int kscj = string.IsNullOrEmpty(score) ? 0 : int.Parse(score);
Log.GetLogger().InfoFormat("车载传过来的考试成绩为：{0}", kscj);
if (kscj < 0)
{
kscj = 0;
}
HandleM17C56(nKch, kscj);
}
break;
default:
break;
}
END:
{
if (!string.IsNullOrEmpty(errorMsg))
{
Log.GetLogger().ErrorFormat("处理车载数据(DataHandlerThreadProc)时产生错误，{0}", errorMsg);
}
else
{
Log.GetLogger().InfoFormat("DataHandlerThreadProc 执行结束");
}
}
return;
}
private bool InitDevices()
{
dicCars.Clear();
//获取 SDK Build
if (!GetSDKBuildVersion())
{
return(false);
}
//窗口初始化（看不懂是什么作用，这里先翻译C++代码）
int kch = 0;
int count = 4;
string key = string.Empty;
m_dispalyShow[4] = BaseMethod.INIGetIntValue(BaseDefine.CONFIG_FILE_PATH_DISPLAY, BaseDefine.CONFIG_SECTION_CONFIG,
BaseDefine.CONFIG_KEY_VIDEOWND, 1);
for (int i = 0; i < count; i++)
{
key = string.Format("{0}{1}", BaseDefine.CONFIG_KEY_DISPLAY, i + 1);
m_dispalyShow[i] = BaseMethod.INIGetIntValue(BaseDefine.CONFIG_FILE_PATH_DISPLAY, BaseDefine.CONFIG_SECTION_CONFIG,
key, i);
kch += m_dispalyShow[i];
}
if (kch != 6)
{
for (int i = 0; i < count; i++)
{
key = string.Format("{0}{1}", BaseDefine.CONFIG_KEY_DISPLAY, i + 1);
string value = i.ToString();
INIOperator.INIWriteValue(BaseDefine.CONFIG_FILE_PATH_DISPLAY, BaseDefine.CONFIG_SECTION_CONFIG, key, value);
m_dispalyShow[i] = i;
}
}
Log.GetLogger().InfoFormat("子窗口配置[%d,%d,%d,%d],音频窗口[%d]", m_dispalyShow[0], m_dispalyShow[1],
m_dispalyShow[2], m_dispalyShow[3], m_dispalyShow[4]);
//合码器初始化
int nNum = BaseMethod.INIGetIntValue(BaseDefine.CONFIG_FILE_PATH_CAR, BaseDefine.CONFIG_SECTION_JMQ,
BaseDefine.CONFIG_KEY_NUM, 0); //合码器数量
int nEven = BaseMethod.INIGetIntValue(BaseDefine.CONFIG_FILE_PATH_DISPLAY, BaseDefine.CONFIG_SECTION_CONFIG,
BaseDefine.CONFIG_KEY_EVEN, 0); //是否隔行合码
int nKskm = BaseMethod.INIGetIntValue(BaseDefine.CONFIG_FILE_PATH_ENV, BaseDefine.CONFIG_SECTION_CONFIG,
BaseDefine.CONFIG_KEY_KSKM, 0); //考试科目
int nWnd2 = BaseMethod.INIGetIntValue(BaseDefine.CONFIG_FILE_PATH_DISPLAY, BaseDefine.CONFIG_SECTION_CONFIG,
BaseDefine.CONFIG_KEY_WND2, 1); //画面二状态
int nHMQ = BaseMethod.INIGetIntValue(BaseDefine.CONFIG_FILE_PATH_ENV, BaseDefine.CONFIG_SECTION_CONFIG,
BaseDefine.CONFIG_KEY_HMQ, 0); //配置的是合码器还是解码器
if (0 == nNum)
{
Log.GetLogger().ErrorFormat("合码器数量为0，请检查配置文件");
return(false);
}
Log.GetLogger().InfoFormat("读取到 {0} 台合码器，EVEN = {1}, 科目{2}，画面2={3}", nNum, nEven, nKskm, nWnd2);
string errorMsg = string.Empty;
for (int i = 1; i <= nNum; i++)
{
string strConf = INIOperator.INIGetStringValue(BaseDefine.CONFIG_FILE_PATH_CAR, BaseDefine.CONFIG_SECTION_JMQ,
i.ToString(), string.Empty);
string[] confArray = BaseMethod.SplitString(strConf, BaseDefine.SPLIT_CHAR_COMMA, out errorMsg);
if (!string.IsNullOrEmpty(errorMsg) || confArray.Length != 4)
{
Log.GetLogger().ErrorFormat("合码器配置错误，请检查配置文件。section = {0}, key = {1}", BaseDefine.CONFIG_SECTION_JMQ, i.ToString());
return(false);
}
string ipAddress = confArray[0]; //合码器地址
string user = confArray[1]; //用户名
string password = confArray[2]; //密码
string port = confArray[3]; //端口
if (string.IsNullOrEmpty(ipAddress) || string.IsNullOrEmpty(user) || string.IsNullOrEmpty(password) || string.IsNullOrEmpty(port))
{
Log.GetLogger().ErrorFormat("合码器配置错误，请检查配置文件。section = {0}, key = {1}", BaseDefine.CONFIG_SECTION_JMQ, i.ToString());
return(false);
}
Log.GetLogger().InfoFormat("准备对合码器 {0} 进行初始化，ip={1}, port={2}, user={3}, password={4}", i, ipAddress, port, user, password);
//登录设备
if (!InitHMQ(ipAddress, user, password, port))
{
return(false);
}
int displayChanCount = (1 == nHMQ) ? m_struDecAbility.struDviInfo.byChanNums : m_struDecAbility.struBncInfo.byChanNums;
string sectionJMQ = string.Format("JMQ{0}", i);
for (int j = 0; j < displayChanCount; j++) //DVI、BNC 个数循环
{
if ((1 == nEven) && (j % 2 == 1))
{
continue;
}
string keyBNC = string.Format("BNC{0}", j + 1); //从 1 开始
int nKch = BaseMethod.INIGetIntValue(BaseDefine.CONFIG_FILE_PATH_CAR, sectionJMQ, keyBNC, -1);
if (-1 == nKch) //没有配置
{
Log.GetLogger().InfoFormat("合码器 JMQ{0} 的 BNC 通道 {1} 处于空闲，可以配置。", i, keyBNC);
continue;
}
//检查通道配置及初始化
if (1 == nHMQ)
{
if (!CheckDVIChan(nKch, j)) //合码器
{
Log.GetLogger().ErrorFormat("通道检测及初始化错误，考车号={0}，DVI={1}", nKch, j);
}
}
else
{
if (!CheckBNCChan(nKch, j)) //解码器
{
Log.GetLogger().ErrorFormat("通道检测及初始化错误，考车号={0}，BNC={1}", nKch, j);
}
}
}
}
return(true);
}
