// Init
//-------------------------------------------------
public apModifierParamSetGroup(apPortrait portrait, apModifierBase parentModifier, int layerIndex)
{
LinkPortrait(portrait, parentModifier);
_layerIndex = layerIndex;
_layerWeight = 1.0f;
_blendMethod = BLEND_METHOD.Interpolation;
}
public void SetSubOption(BLEND_METHOD blendMethod, bool isAutoEndIfNotLoop)
{
_blendMethod = blendMethod;
_isAutoEnd = isAutoEndIfNotLoop;
if (_isLoop)
{
_isAutoEnd = false; //<<Loop일때 AutoEnd는 불가능하다
}
}
/// <summary>
/// [Please do not use it] Set AnimClip to get data
/// </summary>
/// <param name="playData"></param>
/// <param name="layer"></param>
/// <param name="blendMethod"></param>
/// <param name="isAutoEndIfNotLoop"></param>
/// <param name="isEditor"></param>
public void SetAnimClip(apAnimPlayData playData, int layer, BLEND_METHOD blendMethod, bool isAutoEndIfNotLoop, bool isEditor)
{
_linkedAnimClip = playData._linkedAnimClip;
_targetRootUnit = playData._linkedOptRootUnit;
//추가
if (_linkedAnimClip._parentPlayUnit != null &&
_linkedAnimClip._parentPlayUnit != this)
{
//이미 다른 PlayUnit이 사용중이었다면..
_linkedAnimClip._parentPlayUnit.SetEnd();
//_linkedAnimClip._parentPlayUnit._linkedAnimClip = null;
}
_linkedAnimClip._parentPlayUnit = this;
_layer = layer;
_isLoop = _linkedAnimClip.IsLoop;
_isAutoEnd = isAutoEndIfNotLoop;
if (_isLoop)
{
_isAutoEnd = false; //<<Loop일때 AutoEnd는 불가능하다
}
_blendMethod = blendMethod;
_isPause = false;
_playStatus = PLAY_STATUS.Ready;
_isPlayStartEventCalled = false;
_isEndEventCalled = false;
//_speedRatio = 1.0f;
_isFirstFrame = true;
_nextPlayStatus = _playStatus;
//추가 1.14
_isResetFrameOnReadyStatus = true;
if (isEditor)
{
_linkedAnimClip.Stop_Editor(false); //Stop은 하되 업데이트는 하지 않는다. (false)
}
else
{
_linkedAnimClip.Stop_Opt(false);
}
_unitWeight = 0.0f;
_totalRequestWeights = 0.0f;
}
//3) Layer_CalParamResult
public void Calculate_CalParamResult(float layerWeight,
int iLayer,
apModifierBase.BLEND_METHOD blendMethod,
apCalculatedLog resultStackLayerLog
)
{
_weight = layerWeight;
_calResultParamLayerIndex = iLayer;
//_calResultParamBlendType = blendMethod;
switch (blendMethod)
{
case apModifierBase.BLEND_METHOD.Additive:
_layerBlendType = BLEND_METHOD.Additive;
break;
case apModifierBase.BLEND_METHOD.Interpolation:
_layerBlendType = BLEND_METHOD.Interpolation;
break;
}
resultStackLayerLog.LinkLog_ResultParam(this);
}
//2) Layer_ParamSetGroup
public void CalculateParamSetGroup(float layerWeight,
int iLayer,
apModifierParamSetGroup.BLEND_METHOD blendType,
apModifierParamSetGroupVertWeight paramSetGroupVertWeight,
apCalculatedLog calPraramResultLog
)
{
_weight = layerWeight;
_paramSetGroupLayerIndex = iLayer;
switch (blendType)
{
case apModifierParamSetGroup.BLEND_METHOD.Additive:
_layerBlendType = BLEND_METHOD.Additive;
break;
case apModifierParamSetGroup.BLEND_METHOD.Interpolation:
_layerBlendType = BLEND_METHOD.Interpolation;
break;
}
//_paramSetGroupBlendType = blendType;
_paramSetGroupVertWeight = paramSetGroupVertWeight; //<<보통은 Null
LinkLog_ModLayerParent(calPraramResultLog);
}
public void Mecanim_Update(float weight, float timeRatio, int playOrder, int playLayer, BLEND_METHOD blendMethod, float speed)
{
if (_linkedAnimClip == null)
{
//Debug.LogError("No AnimClip");
return;
}
_unitWeight = weight;
_totalRequestWeights = 1.0f;
_blendMethod = blendMethod;
_playOrder = playOrder;
_layer = playLayer;
_isMecanimResetable = false;
//_isMecanimLoopingFrame = false;
//2.28 일단 이거 제외 [1.1.6]
//1.1.4 / 1.1.5에서 메카님 음수 speed에 적용하려고 만든 것 같은데, 오작동을 일으킨다.
//Debug.Log("Mecanim [" + timeRatio + " ( " + speed + " )]");
//if((speed > 0.0f && timeRatio < _timeRatioPrev) ||
// (speed < 0.0f && timeRatio > _timeRatioPrev))
//{
// //Debug.LogWarning("[" + _linkedAnimClip._name + "] 메카님 Speed와 TimeRatio 증감이 반대 : " + (timeRatio - _timeRatioPrev) + " / Speed : " + speed);
// //Debug.LogWarning("[" + _linkedAnimClip._name + "] 메카님 Speed와 TimeRatio 증감이 반대 : " + _timeRatioPrev + " >> " + timeRatio + " / Speed : " + speed);
// //Speed와 맞지 않은 증감폭이다.
// //이전
// //timeRatio = _timeRatioPrev - (timeRatio - _timeRatioPrev);<<이게 문제.. 근데 왜..
//}
//_timeRatioPrev = timeRatio;//<<1.1.6에서 삭제
if (_linkedAnimClip.IsLoop)
{
//int curTimeRatioLoopCount = (int)timeRatio;
//if(_mecanimTimeRatioLoopCount != curTimeRatioLoopCount)
//{
// Debug.LogError("[Index Changed] _isMecanimLoopingFrame > True : " + timeRatio + " (" + _mecanimTimeRatioLoopCount + " >> " + curTimeRatioLoopCount + ")");
// //루프 카운트가 바뀌었다. > //이번 프레임에서 루프가 된다.
// _isMecanimLoopingFrame = true;
// _mecanimTimeRatioLoopCount = curTimeRatioLoopCount;
//}
//else
//{
// if(
// (speed > 0.0f && timeRatio < 0.0f) ||
// (speed < 0.0f && timeRatio > 0.0f)
// )
// {
// Debug.LogError("[Speed And Time Inverted] _isMecanimLoopingFrame > True : " + timeRatio + " (Speed : " + speed + ")");
// //앞으로 진행하는데, timeRatio가 뒤로 가거나 또는 그 반대
// //Loop가 발생한 것이다.
// _isMecanimLoopingFrame = true;
// }
//}
if (timeRatio > 1.0f)
{
timeRatio -= (int)timeRatio;
}
else if (timeRatio < 0.0f)
{
timeRatio = (1.0f - Mathf.Abs(timeRatio) - (int)Mathf.Abs(timeRatio));
}
}
else
{
if (timeRatio > 1.0f)
{
//timeRatio = 2.0f;//이전
timeRatio = 1.0f; //변경
}
else if (timeRatio < 0.0f)
{
//timeRatio = -1.0f;//이전
timeRatio = 0.0f; //변경
}
else
{
//Time Ratio가 0~1의 값을 가지면 Reset이 가능하다.
_isMecanimResetable = true;
}
}
_mecanimTime = timeRatio * _mecanimTimeLength;
bool isResetFrame = false;
if (!_linkedAnimClip.IsLoop && _isMecanimResetable)
{
if (speed > 0.0f)
{
if (_mecanimTime < _mecanimTimePrev)
{
isResetFrame = true;
_linkedAnimClip.ResetEvents();
_linkedAnimClip.ResetFrame();
}
}
else if (speed < 0.0f)
{
if (_mecanimTime > _mecanimTimePrev)
{
isResetFrame = true;
_linkedAnimClip.ResetEvents();
_linkedAnimClip.ResetFrame();
}
}
}
//if(_isMecanimLoopingFrame)
//{
// Debug.LogError(">> Reset Event");
// _linkedAnimClip.ResetEvents();
//}
//TODO : 여기서 tDelta로만 Forward/Backward를 결정하는게 아니라, 메카님의 Speed로 방향을 인식하도록 바꾸어야 한다.
if (!isResetFrame)
{
_mecanimDeltaTime = _mecanimTime - _mecanimTimePrev;
if (_mecanimTimeLength > 0.0f)
{
if (_mecanimDeltaTime < 0.0f && speed > 0.0f)
{
//진행 방향과 시간이 반대라면
while (_mecanimDeltaTime < 0.0f)
{
_mecanimDeltaTime += _mecanimTimeLength;
}
}
else if (_mecanimDeltaTime > 0.0f && speed < 0.0f)
{
//진행 방향과 시간이 반대라면
while (_mecanimDeltaTime > 0.0f)
{
_mecanimDeltaTime -= _mecanimTimeLength;
}
}
}
//변경 1.17 : 일반 Update_Opt에서 UpdateMecanim_Opt로 변경한다.
//_linkedAnimClip.UpdateMecanim_Opt(_mecanimTime - _mecanimTimePrev, speed);
}
else
{
_mecanimDeltaTime = _mecanimTime;
//변경 1.17 : 일반 Update_Opt에서 UpdateMecanim_Opt로 변경한다.
//_linkedAnimClip.UpdateMecanim_Opt(_mecanimTime, speed);
}
_linkedAnimClip.UpdateMecanim_Opt(_mecanimDeltaTime, speed);
_mecanimTimePrev = _mecanimTime;
}
public void Mecanim_Update(float weight, float timeRatio, int playOrder, int playLayer, BLEND_METHOD blendMethod, float speed)
{
if (_linkedAnimClip == null)
{
//Debug.LogError("No AnimClip");
return;
}
_unitWeight = weight;
_totalRequestWeights = 1.0f;
_blendMethod = blendMethod;
_playOrder = playOrder;
_layer = playLayer;
_isMecanimResetable = false;
if (_linkedAnimClip.IsLoop)
{
if (timeRatio > 1.0f)
{
timeRatio -= (int)timeRatio;
}
else if (timeRatio < 0.0f)
{
timeRatio = (1.0f - Mathf.Abs(timeRatio) - (int)Mathf.Abs(timeRatio));
}
}
else
{
if (timeRatio > 1.0f)
{
timeRatio = 2.0f;
}
else if (timeRatio < 0.0f)
{
timeRatio = -1.0f;
}
else
{
//Time Ratio가 0~1의 값을 가지면 Reset이 가능하다.
_isMecanimResetable = true;
}
}
_mecanimTime = timeRatio * _mecanimTimeLength;
bool isResetFrame = false;
if (!_linkedAnimClip.IsLoop && _isMecanimResetable)
{
if (speed > 0.0f)
{
if (_mecanimTime < _mecanimTimePrev)
{
isResetFrame = true;
_linkedAnimClip.ResetEvents();
_linkedAnimClip.ResetFrame();
}
}
else if (speed < 0.0f)
{
if (_mecanimTime > _mecanimTimePrev)
{
isResetFrame = true;
_linkedAnimClip.ResetEvents();
_linkedAnimClip.ResetFrame();
}
}
}
//Debug.Log("Mecanim_Update - " + timeRatio);
//_linkedAnimClip.UpdateFrame_OptMecanim(_mecanimTime - _mecanimTimePrev, speed);
if (!isResetFrame)
{
_linkedAnimClip.Update_Opt(_mecanimTime - _mecanimTimePrev); //<<기존
}
else
{
//Debug.Log("Reset Frame : _mecanimTime : " + _mecanimTime);
_linkedAnimClip.Update_Opt(_mecanimTime);
}
//_linkedAnimClip.Update_Opt(Time.deltaTime * speed);//<<테스트
_mecanimTimePrev = _mecanimTime;
}