public bool PositionBuilder(Vector3d vec)
{
try
{
Matrix4 inv = this.work.Info.Matr.GetInversMatrix();
CartesianCoordinateSystem csys = BoundingBoxUtils.CreateCoordinateSystem(this.work.Info.Matr, inv);
ElectrodeSetValueInfo setValue = ElectrodeSetValueInfo.GetAttribute(eleComp);
ElectrodeSetValueInfo newSetValue = setValue.Clone() as ElectrodeSetValueInfo;
Component copyComp = AssmbliesUtils.MoveCompCopyPart(eleComp, vec, work.Info.Matr);
NXObject instance = AssmbliesUtils.GetOccOfInstance(copyComp.Tag);
BodyInfo info = GetDischargeFace(csys, copyComp);
newSetValue.EleSetValue[0] = setValue.EleSetValue[0] + vec.X;
newSetValue.EleSetValue[1] = setValue.EleSetValue[1] + vec.Y;
newSetValue.EleSetValue[2] = setValue.EleSetValue[2] + vec.Z;
newSetValue.Positioning = GetPositionName();
if (info != null)
{
newSetValue.ContactArea = info.ContactArea;
newSetValue.ProjectedArea = info.GetProjectedArea(csys, this.work.Info.Matr);
}
newSetValue.SetAttribute(instance);
return(true);
}
catch (NXException ex)
{
ClassItem.WriteLogFile("电极跑位错误！" + ex.Message);
return(false);
}
}
//------------------------------------------------------------------------------
//Callback Name: apply_cb
//------------------------------------------------------------------------------
public int apply_cb()
{
int errorCode = 0;
try
{
//---- Enter your callback code here
bool anyPartsModified1;
NXOpen.PartSaveStatus partSaveStatus1;
Session.GetSession().Parts.SaveAll(out anyPartsModified1, out partSaveStatus1);
NXOpen.Assemblies.Component eleComp = this.SeleElePart.GetSelectedObjects()[0] as NXOpen.Assemblies.Component;
string name = eleComp.Name + "-" + this.StrName.Value.ToUpper();
if (!this.EleDuplicationOfName(name))
{
this.StrName.Value = "";
return(0);
}
ElectrodeModel eleModel = new ElectrodeModel();
eleModel.GetModelForPart(eleComp.Prototype as Part);
name = work.WorkpieceDirectoryPath + name + ".prt";
Vector3d movePt = new Vector3d(double_x.Value, double_y.Value, double_z.Value);
NXOpen.Assemblies.Component copyComp = AssmbliesUtils.MoveCompCopyPart(eleComp, movePt, work.WorkMatr);
AssmbliesUtils.MakeUnique(copyComp, name);
ElectrodeInfo newInfo = this.SetEleInfo(eleModel.EleInfo);
newInfo.SetAttribute(copyComp.Prototype as Part);
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
errorCode = 1;
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
return(errorCode);
}
private List <string> CreateNewWork1(NXOpen.Assemblies.Component ct, WorkpieceModel workpiece, Matrix4 mat, UserModel user)
{
List <string> err = new List <string>();
MoldInfo moldInfo = workpiece.Info.MoldInfo;
int num = asmColl.GetWorkCollection(moldInfo).Work.Count;
WorkInfo workInfo = new WorkInfo(workpiece.Info.MoldInfo, user, num + 1, mat);
string workName = workInfo.MoldInfo.MoldNumber + "-" + workInfo.MoldInfo.WorkpieceNumber + "-" + "WORK" + workInfo.WorkNumber.ToString();
EDMModel edm = GetEdm(ct);
if (edm == null)
{
err.Add("获取EDM错误");
return(err);
}
NXOpen.Assemblies.Component comp = AssmbliesUtils.MoveCompCopyPart(ct.Parent.Parent, new Vector3d(0, 0, 0), mat);
AssmbliesUtils.MakeUnique(comp, edm.WorkpieceDirectoryPath + workName + ".prt");
workInfo.SetAttribute(comp.Prototype as Part);
WorkModel wm = new WorkModel(comp.Prototype as Part);
if (wm != null)
{
wm.SaveCsys(workPart);
}
if (!edm.Info.MoldInfo.Equals(workInfo.MoldInfo))
{
EDMInfo edmInfo = new EDMInfo(workInfo.MoldInfo, workInfo.UserModel);
string edmName = edmInfo.MoldInfo.MoldNumber + "-" + edmInfo.MoldInfo.WorkpieceNumber + "-" + "EDM";
foreach (NXOpen.Assemblies.Component cp in comp.GetChildren())
{
if (ParentAssmblieInfo.IsEDM(cp))
{
AssmbliesUtils.MakeUnique(cp, edm.WorkpieceDirectoryPath + edmName + ".prt");
edmInfo.SetAttribute(cp.Prototype as Part);
foreach (NXOpen.Assemblies.Component co in cp.GetChildren())
{
if (!(co.Prototype as Part).Equals(workpiece.PartTag))
{
AssmbliesUtils.DeleteComponent(co);
}
}
}
}
}
return(err);
}
/// <summary>
/// AB齿跑位
/// </summary>
/// <param name="eleComp"></param>
public void MoveEleComp(NXOpen.Assemblies.Component eleComp)
{
for (int i = 1; i < condition.ToolhInfo.Count; i++)
{
Vector3d temp = new Vector3d();
temp.X = -condition.ToolhInfo[i].Offset[0];
temp.Y = -condition.ToolhInfo[i].Offset[1];
temp.Z = 0;
NXOpen.Assemblies.Component ct = AssmbliesUtils.MoveCompCopyPart(eleComp, temp, condition.Work.Info.Matr);
NXObject instance = AssmbliesUtils.GetOccOfInstance(ct.Tag);
ElectrodeSetValueInfo setValue = allInfo.SetValue.Clone() as ElectrodeSetValueInfo;
setValue.EleSetValue[0] = setValue.EleSetValue[0] + temp.X;
setValue.EleSetValue[1] = setValue.EleSetValue[1] + temp.Y;
setValue.ContactArea = condition.ToolhInfo[i].GetAllContactArea();
setValue.ProjectedArea = condition.ToolhInfo[i].GetProjectedArea(condition.Work.Info.Matr);
setValue.Positioning = condition.ToolhInfo[i].ToolhName;
setValue.SetAttribute(instance);
}
}
private List <string> CopWork(NXOpen.Assemblies.Component ct, WorkModel work, UserModel user)
{
List <string> err = new List <string>();
Matrix4 mat = new Matrix4();
mat.Identity();
MoldInfo mold = work.Info.MoldInfo.Clone() as MoldInfo;
WorkCollection workColl = new WorkCollection(mold);
NXOpen.Assemblies.Component moveCt = null;
try
{
moveCt = AssmbliesUtils.MoveCompCopyPart(ct, new Vector3d(), mat);
}
catch (NXException ex)
{
err.Add("无法移动工件！" + ex.Message);
return(err);
}
string name = work.WorkpieceDirectoryPath + mold.MoldNumber + "-" + mold.WorkpieceNumber + "-";
if (moveCt != null)
{
WorkInfo wk = new WorkInfo(mold, user, work.Info.WorkNumber, work.Info.Matr);
try
{
NXObject make1 = AssmbliesUtils.MakeUnique(moveCt, name + "WORK" + (workColl.Work[workColl.Work.Count - 1].Info.WorkNumber + 1).ToString() + ".prt");
wk.WorkNumber = (workColl.Work[workColl.Work.Count - 1].Info.WorkNumber + 1);
wk.SetAttribute(moveCt.Prototype as Part);
}
catch (NXException ex)
{
err.Add(name + "WORK" + (workColl.Work[workColl.Work.Count - 1].Info.WorkNumber + 1).ToString() + ".prt" + ex.Message + "无法创建唯一");
}
}
return(err);
}
/// <summary>
/// 复制work
/// </summary>
/// <param name="ct"></param>
/// <param name="work"></param>
/// <param name="workpieceNumber"></param>
/// <param name="user"></param>
/// <returns></returns>
private List <string> CopyWork(NXOpen.Assemblies.Component ct, WorkModel work, string workpieceNumber, UserModel user)
{
List <string> err = new List <string>();
Matrix4 mat = new Matrix4();
mat.Identity();
MoldInfo mold = work.Info.MoldInfo.Clone() as MoldInfo;
NXOpen.Assemblies.Component moveCt = null;
try
{
moveCt = AssmbliesUtils.MoveCompCopyPart(ct, new Vector3d(), mat);
}
catch (NXException ex)
{
err.Add("无法移动工件！" + ex.Message);
return(err);
}
mold.WorkpieceNumber = workpieceNumber;
string name = work.WorkpieceDirectoryPath + mold.MoldNumber + "-" + mold.WorkpieceNumber + "-";
if (moveCt != null)
{
foreach (NXOpen.Assemblies.Component com in moveCt.GetChildren())
{
if (ParentAssmblieInfo.IsParent(com))
{
ParentAssmblieInfo info1 = ParentAssmblieInfo.GetAttribute(com);
if (info1.Type == PartType.EDM)
{
string edmName = name + "EDM";
if (File.Exists(edmName + ".prt"))
{
edmName = edmName + "5";
}
EDMInfo edm = new EDMInfo(mold, user);
try
{
NXObject make = AssmbliesUtils.MakeUnique(com, edmName + ".prt");
edm.SetAttribute(com.Prototype as Part);
break;
}
catch (NXException ex)
{
err.Add(name + "EDM.prt" + ex.Message + "无法创建唯一");
}
}
}
}
try
{
NXObject make1 = AssmbliesUtils.MakeUnique(moveCt, name + "WORK" + work.Info.WorkNumber.ToString() + ".prt");
WorkInfo wk = new WorkInfo(mold, user, work.Info.WorkNumber, work.Info.Matr);
wk.SetAttribute(moveCt.Prototype as Part);
}
catch (NXException ex)
{
err.Add(name + "WORK" + work.Info.WorkNumber.ToString() + ".prt" + ex.Message + "无法创建唯一");
}
}
return(err);
}