private void SetupAccessPoints()
{
Log(String.Format(CultureInfo.InvariantCulture, "ASSOCIATION_VARIATION: Setup {0}", m_AssocTestOptions.ToString()));
m_APConfigs = new Collection <APConfig>();
// FIPS mode only phys
if (m_AssociationConfiguration.FIPSMode)
{
if (m_AssociationConfiguration.TestNFIPS)
{
//If TestNFIPS is set then use n phy regardless of what it was before
m_AP1Config24GHz.Phy = PhyType.n;
m_AP1Config5GHz.Phy = PhyType.n;
m_AP2Config24GHz.Phy = PhyType.n;
m_AP2Config24GHz.Phy = PhyType.n;
}
else
{
//If TestNFIPS not set then need to downgrade any n phy.
if (m_AP1Config24GHz.Phy == PhyType.n)
{
m_AP1Config24GHz.Phy = PhyType.g;
}
if (m_AP1Config5GHz.Phy == PhyType.n)
{
m_AP1Config5GHz.Phy = PhyType.a;
}
if (m_AP2Config24GHz.Phy == PhyType.n)
{
m_AP2Config24GHz.Phy = PhyType.g;
}
if (m_AP2Config5GHz.Phy == PhyType.n)
{
m_AP2Config5GHz.Phy = PhyType.a;
}
}
}
m_APConfigs.Add(WlanAccessPointHelper.CreateWirelessAccessPoint(
m_AP1Config24GHz.Auth, m_AP1Config24GHz.Cipher, m_AP1Config24GHz.Phy, "1234567890",
m_AP1Config5GHz.Auth, m_AP1Config5GHz.Cipher, m_AP1Config5GHz.Phy, "1234567890"));
m_APConfigs[0].RadioChannel24Ghz = m_AP1Config24GHz.Channel;
m_APConfigs[0].RadioChannel5Ghz = m_AP1Config5GHz.Channel;
m_APConfigs.Add(WlanAccessPointHelper.CreateWirelessAccessPoint(
m_AP2Config24GHz.Auth, m_AP2Config24GHz.Cipher, m_AP2Config24GHz.Phy, "1234567890",
m_AP2Config5GHz.Auth, m_AP2Config5GHz.Cipher, m_AP2Config5GHz.Phy, "1234567890"));
m_APConfigs[1].RadioChannel24Ghz = m_AP2Config24GHz.Channel;
m_APConfigs[1].RadioChannel5Ghz = m_AP2Config5GHz.Channel;
//set hidden.
m_APConfigs[0].BeaconEnabled_24GHZ = !m_AP1Config24GHz.IsHidden;
m_APConfigs[0].BeaconEnabled_5GHZ = !m_AP1Config5GHz.IsHidden;
m_APConfigs[1].BeaconEnabled_24GHZ = !m_AP2Config24GHz.IsHidden;
m_APConfigs[1].BeaconEnabled_5GHZ = !m_AP2Config5GHz.IsHidden;
// We only use Enterprise on second router. Setting both
m_Phase1Auth[0] = m_AP2Config24GHz.EapPhase1Type;
m_Phase2Auth[0] = m_AP2Config24GHz.EapPhase2Type;
m_Phase1Auth[1] = m_AP2Config24GHz.EapPhase1Type;
m_Phase2Auth[1] = m_AP2Config24GHz.EapPhase2Type;
m_APConfigs[0].RadiusIPAddress_24GHZ = m_AssociationConfiguration.ServiceAPChannelAddress;
m_APConfigs[1].RadiusIPAddress_24GHZ = m_AssociationConfiguration.ServiceAPChannelAddress;
m_APConfigs[0].RadiusIPAddress_5GHZ = m_AssociationConfiguration.ServiceAPChannelAddress;
m_APConfigs[1].RadiusIPAddress_5GHZ = m_AssociationConfiguration.ServiceAPChannelAddress;
m_APConfigs[0].RadiusSecretKey_24GHZ = m_EnterpriseRadiusSecret;
m_APConfigs[1].RadiusSecretKey_24GHZ = m_EnterpriseRadiusSecret;
m_APConfigs[0].RadiusSecretKey_5GHZ = m_EnterpriseRadiusSecret;
m_APConfigs[1].RadiusSecretKey_5GHZ = m_EnterpriseRadiusSecret;
Guid[] routerList = new Guid[2];
routerList[0] = m_Routers[0];
routerList[1] = m_Routers[1];
Collection <ConfiguredSSIDs> configuredSSIDs = new Collection <ConfiguredSSIDs>();
LogMajor("Configuring Router0");
LogMajor("Configuring Router1");
APConfig[] apConfigArray = new APConfig[m_APConfigs.Count];
for (int index = 0; index < m_APConfigs.Count; index++)
{
apConfigArray[index] = m_APConfigs[index];
}
m_ApConfigClient.ApplyConfigurationParallel(routerList, apConfigArray, out configuredSSIDs);
m_APConfigs[0].SSID_24GHZ = configuredSSIDs[0].TwoPoint4GhzSSID;
m_APConfigs[0].SSID_5GHZ = configuredSSIDs[0].FiveghzSSID;
m_APConfigs[1].SSID_24GHZ = configuredSSIDs[1].TwoPoint4GhzSSID;
m_APConfigs[1].SSID_5GHZ = configuredSSIDs[1].FiveghzSSID;
LogMajor("Configured Router0 SSID:" + m_APConfigs[0].SSID_24GHZ + "/" + m_APConfigs[0].SSID_5GHZ);
LogMajor("Configured Router1 SSID:" + m_APConfigs[1].SSID_24GHZ + "/" + m_APConfigs[1].SSID_5GHZ);
LogMajor("Taking the LAN ports down on both routers");
m_ApConfigClient.SetLanPortsState(routerList[0], true);
m_ApConfigClient.SetLanPortsState(routerList[1], true);
Log("Reading the BSSIDs configured on router for validation when connected");
for (int i = 0; i < 2; i++)
{
m_APConfigs[i].BSSID_24GHZ = m_ApConfigClient.GetAccessPointBSSID(m_Routers[i], false);
LogMajor("BSSID(" + m_APConfigs[i].SSID_24GHZ + ")=" + m_APConfigs[i].BSSID_24GHZ);
LogMajor("Authentication(" + m_APConfigs[i].SSID_24GHZ + ")=" + m_APConfigs[i].Authentication_24GHZ.ProfileValue);
LogMajor("Encryption(" + m_APConfigs[i].SSID_24GHZ + ")=" + m_APConfigs[i].Encryption_24GHZ.ProfileValue);
LogMajor("Phy(" + m_APConfigs[i].SSID_24GHZ + ")=" + m_APConfigs[i].PhyType_24GHZ.ProfileValue);
LogMajor("Channel(" + m_APConfigs[i].SSID_24GHZ + ")=" + m_APConfigs[i].RadioChannel24Ghz);
m_APConfigs[i].BSSID_5GHZ = m_ApConfigClient.GetAccessPointBSSID(m_Routers[i], true);
LogMajor("BSSID(" + m_APConfigs[i].SSID_5GHZ + ")=" + m_APConfigs[i].BSSID_5GHZ);
LogMajor("AuthenticationMethod(" + m_APConfigs[i].SSID_5GHZ + ")=" + m_APConfigs[i].Authentication_5GHZ.ProfileValue);
LogMajor("Encryption(" + m_APConfigs[i].SSID_5GHZ + ")=" + m_APConfigs[i].Encryption_5GHZ.ProfileValue);
LogMajor("Phy(" + m_APConfigs[i].SSID_5GHZ + ")=" + m_APConfigs[i].PhyType_5GHZ.ProfileValue);
LogMajor("Channel(" + m_APConfigs[i].SSID_5GHZ + ")=" + m_APConfigs[i].RadioChannel5Ghz);
}
}
// Here we will switch based on the router
private void SetupAccessPoints()
{
bool bSameSSID = false;
APConfigs = new List <APConfig>();
APConfigs.Add(WlanAccessPointHelper.CreateWirelessAccessPoint(
m_AP1Config24GHz.Auth, m_AP1Config24GHz.Cipher, m_AP1Config24GHz.Phy, "TestPassphrase2",
m_AP1Config5GHz.Auth, m_AP1Config5GHz.Cipher, m_AP1Config5GHz.Phy, "TestPassphrase1"));
if (m_ScanTestOptions.HasFlag(SCAN_TEST_OPTIONS.DuplicateSSIDs))
{
// Both APs should have same SSID
APConfigs.Add(WlanAccessPointHelper.DuplicateAPForRoaming(APConfigs[0]));
bSameSSID = true;
}
else
{
APConfigs.Add(WlanAccessPointHelper.CreateWirelessAccessPoint(
m_AP2Config24GHz.Auth, m_AP2Config24GHz.Cipher, m_AP2Config24GHz.Phy, "TestPassphrase2",
m_AP2Config5GHz.Auth, m_AP2Config5GHz.Cipher, m_AP2Config5GHz.Phy, "TestPassphrase1"));
}
APConfigs[1].BSSID_24GHZ = WlanAccessPointHelper.GenerateBSSID();
APConfigs[1].BSSID_5GHZ = WlanAccessPointHelper.GenerateBSSID();
APConfigs[0].RadioChannel24Ghz = m_AP1Config24GHz.Channel;
APConfigs[0].RadioChannel5Ghz = m_AP1Config5GHz.Channel;
APConfigs[1].RadioChannel24Ghz = m_AP2Config24GHz.Channel;
APConfigs[1].RadioChannel5Ghz = m_AP2Config5GHz.Channel;
APConfigs[0].BeaconEnabled_24GHZ = !m_AP1Config24GHz.IsHidden;
APConfigs[0].BeaconEnabled_5GHZ = !m_AP1Config5GHz.IsHidden;
APConfigs[1].BeaconEnabled_24GHZ = !m_AP2Config24GHz.IsHidden;
APConfigs[1].BeaconEnabled_5GHZ = !m_AP2Config5GHz.IsHidden;
// For the same SSID case, we want the APs to be configured with the specific SSID
if (bSameSSID)
{
APConfigs[0].SmartCompare = false;
APConfigs[1].SmartCompare = false;
}
Guid[] routerList = new Guid[2];
routerList[0] = routers[0];
routerList[1] = routers[1];
Collection <ConfiguredSSIDs> configuredSSIDs = new Collection <ConfiguredSSIDs>();
LogMajor("Configuring Router0");
LogMajor("Configuring Router1");
APConfig[] apConfigArray = new APConfig[APConfigs.Count];
for (int index = 0; index < APConfigs.Count; index++)
{
apConfigArray[index] = APConfigs[index];
}
AC.ApplyConfigurationParallel(routerList, apConfigArray, out configuredSSIDs);
if (!bSameSSID)
{
APConfigs[0].SSID_24GHZ = configuredSSIDs[0].TwoPoint4GhzSSID;
APConfigs[0].SSID_5GHZ = configuredSSIDs[0].FiveghzSSID;
APConfigs[1].SSID_24GHZ = configuredSSIDs[1].TwoPoint4GhzSSID;
APConfigs[1].SSID_5GHZ = configuredSSIDs[1].FiveghzSSID;
}
LogMajor("Configured Router0 SSID:" + APConfigs[0].SSID_24GHZ + "/" + APConfigs[0].SSID_5GHZ);
LogMajor("Configured Router1 SSID:" + APConfigs[1].SSID_24GHZ + "/" + APConfigs[1].SSID_5GHZ);
Log("Reading the BSSIDs configured on router for validation when connected");
for (int i = 0; i < 2; i++)
{
APConfigs[i].BSSID_24GHZ = AC.GetAccessPointBSSID(routers[i], false);
LogMajor("BSSID(" + APConfigs[i].SSID_24GHZ + ") = " + APConfigs[i].BSSID_24GHZ);
LogMajor("Authentication(" + APConfigs[i].SSID_24GHZ + ") = " + APConfigs[i].Authentication_24GHZ.ProfileValue);
LogMajor("Encryption(" + APConfigs[i].SSID_24GHZ + ") = " + APConfigs[i].Encryption_24GHZ.ProfileValue);
LogMajor("Phy(" + APConfigs[i].SSID_24GHZ + ") = " + APConfigs[i].PhyType_24GHZ.ProfileValue);
LogMajor("Channel(" + APConfigs[i].SSID_24GHZ + ") = " + APConfigs[i].RadioChannel24Ghz);
LogMajor("Hidden(" + APConfigs[i].SSID_24GHZ + ") = " + ((APConfigs[i].BeaconEnabled_24GHZ == false) ? "Yes" : "No"));
APConfigs[i].BSSID_5GHZ = AC.GetAccessPointBSSID(routers[i], true);
LogMajor("BSSID(" + APConfigs[i].SSID_5GHZ + ")= " + APConfigs[i].BSSID_5GHZ);
LogMajor("AuthenticationMethod(" + APConfigs[i].SSID_5GHZ + ") = " + APConfigs[i].Authentication_5GHZ.ProfileValue);
LogMajor("Encryption(" + APConfigs[i].SSID_5GHZ + ") = " + APConfigs[i].Encryption_5GHZ.ProfileValue);
LogMajor("Phy(" + APConfigs[i].SSID_5GHZ + ") = " + APConfigs[i].PhyType_5GHZ.ProfileValue);
LogMajor("Channel(" + APConfigs[i].SSID_5GHZ + ") = " + APConfigs[i].RadioChannel5Ghz);
LogMajor("Hidden(" + APConfigs[i].SSID_5GHZ + ") = " + ((APConfigs[i].BeaconEnabled_5GHZ == false) ? "Yes" : "No"));
}
}
// Here we will switch based on the router
private void SetupAccessPoints()
{
bool bSetupRadius = false;
APConfigs = new List <APConfig>();
APConfigs.Add(WlanAccessPointHelper.CreateWirelessAccessPoint(
m_AP1Config24GHz.Auth, m_AP1Config24GHz.Cipher, m_AP1Config24GHz.Phy, "TestPassphrase2",
m_AP1Config5GHz.Auth, m_AP1Config5GHz.Cipher, m_AP1Config5GHz.Phy, "TestPassphrase1"));
APConfigs[0].RadioChannel24Ghz = m_AP1Config24GHz.Channel;
APConfigs[0].RadioChannel5Ghz = m_AP1Config5GHz.Channel;
// TODO: Make this nicer
if (m_AP1Config24GHz.Auth == AuthenticationMethod.WPA2Enterprise)
{
phase1Auth = m_AP1Config24GHz.EapPhase1Type;
phase2Auth = m_AP1Config24GHz.EapPhase2Type;
bSetupRadius = true;
}
else if (m_AP1Config5GHz.Auth == AuthenticationMethod.WPA2Enterprise)
{
phase1Auth = m_AP1Config5GHz.EapPhase1Type;
phase2Auth = m_AP1Config5GHz.EapPhase2Type;
bSetupRadius = true;
}
else if (m_AP2Config24GHz.Auth == AuthenticationMethod.WPA2Enterprise)
{
phase1Auth = m_AP2Config24GHz.EapPhase1Type;
phase2Auth = m_AP2Config24GHz.EapPhase2Type;
bSetupRadius = true;
}
else if (m_AP2Config5GHz.Auth == AuthenticationMethod.WPA2Enterprise)
{
phase1Auth = m_AP2Config5GHz.EapPhase1Type;
phase2Auth = m_AP2Config5GHz.EapPhase2Type;
bSetupRadius = true;
}
if (bSetupRadius)
{
APConfigs[0].RadiusIPAddress_24GHZ = RoamingConfiguration.ServiceAPChannelAddress;
APConfigs[0].RadiusIPAddress_5GHZ = RoamingConfiguration.ServiceAPChannelAddress;
APConfigs[0].RadiusSecretKey_24GHZ = EnterpriseRadiusSecret;
APConfigs[0].RadiusSecretKey_5GHZ = EnterpriseRadiusSecret;
}
// Both APs should have same SSID
APConfigs.Add(WlanAccessPointHelper.DuplicateAPForRoaming(APConfigs[0]));
// Update stuff for second AP
APConfigs[1].BSSID_24GHZ = WlanAccessPointHelper.GenerateBSSID();
APConfigs[1].BSSID_5GHZ = WlanAccessPointHelper.GenerateBSSID();
APConfigs[1].RadioChannel24Ghz = m_AP2Config24GHz.Channel;
APConfigs[1].RadioChannel5Ghz = m_AP2Config5GHz.Channel;
APConfigs[0].DHCPServerEnabled = false;
APConfigs[0].LocalIPAddress = Helpers.RouterAlternateLocalIPAddress;
APConfigs[0].NATEnabled = false; // Need this with Static route configured on AP controller machine
APConfigs[0].SmartCompare = false; //Since the ap's NEED the same SSID this must be false
APConfigs[1].DHCPServerEnabled = true;
APConfigs[1].DHCPGateway = Helpers.RouterAlternateLocalIPAddress;
APConfigs[1].NATEnabled = false; // Need this with Static route configured on AP controller machine
APConfigs[1].SmartCompare = false; //Since the ap's NEED the same SSID this must be false
Guid[] routerList = new Guid[2];
routerList[0] = routers[0];
routerList[1] = routers[1];
Collection <ConfiguredSSIDs> configuredSSIDs = new Collection <ConfiguredSSIDs>();
LogMajor("Configuring Router0");
LogMajor("Configuring Router1");
APConfig[] apConfigArray = new APConfig[APConfigs.Count];
for (int index = 0; index < APConfigs.Count; index++)
{
apConfigArray[index] = APConfigs[index];
}
AC.ApplyConfigurationParallel(routerList, apConfigArray, out configuredSSIDs);
LogMajor("Configured Router0 SSID:" + APConfigs[0].SSID_24GHZ + "/" + APConfigs[0].SSID_5GHZ);
LogMajor("Configured Router1 SSID:" + APConfigs[1].SSID_24GHZ + "/" + APConfigs[1].SSID_5GHZ);
LogMajor("Bringing up the Lan ports on both the routers");
AC.SetLanPortsState(routerList[0], false);
AC.SetLanPortsState(routerList[1], false);
LogMajor("Setting up static routes from AP server to router");
AC.SetStaticRoute(routers[1]);
Log("Reading the BSSIDs configured on router for validation when connected");
for (int i = 0; i < 2; i++)
{
APConfigs[i].BSSID_24GHZ = AC.GetAccessPointBSSID(routers[i], false);
LogMajor("BSSID(" + APConfigs[i].SSID_24GHZ + ")=" + APConfigs[i].BSSID_24GHZ);
LogMajor("Authentication(" + APConfigs[i].SSID_24GHZ + ")=" + APConfigs[i].Authentication_24GHZ.ProfileValue);
LogMajor("Encryption(" + APConfigs[i].SSID_24GHZ + ")=" + APConfigs[i].Encryption_24GHZ.ProfileValue);
LogMajor("Phy(" + APConfigs[i].SSID_24GHZ + ")=" + APConfigs[i].PhyType_24GHZ.ProfileValue);
LogMajor("Channel(" + APConfigs[i].SSID_24GHZ + ")=" + APConfigs[i].RadioChannel24Ghz);
APConfigs[i].BSSID_5GHZ = AC.GetAccessPointBSSID(routers[i], true);
LogMajor("BSSID(" + APConfigs[i].SSID_5GHZ + ")=" + APConfigs[i].BSSID_5GHZ);
LogMajor("AuthenticationMethod(" + APConfigs[i].SSID_5GHZ + ")=" + APConfigs[i].Authentication_5GHZ.ProfileValue);
LogMajor("Encryption(" + APConfigs[i].SSID_5GHZ + ")=" + APConfigs[i].Encryption_5GHZ.ProfileValue);
LogMajor("Phy(" + APConfigs[i].SSID_5GHZ + ")=" + APConfigs[i].PhyType_5GHZ.ProfileValue);
LogMajor("Channel(" + APConfigs[i].SSID_5GHZ + ")=" + APConfigs[i].RadioChannel5Ghz);
}
}