Ejemplo n.º 1
0
        public void TestListenerRegisteredUnregistered()
        {
            AllJoyn.BusAttachment bus         = new AllJoyn.BusAttachment("BusListenerTest", true);
            AllJoyn.BusListener   busListener = new TestBusListener(this);
            listenerRegistered   = false;
            listenerUnregistered = false;
            AllJoyn.QStatus status = AllJoyn.QStatus.FAIL;

            // start the bus attachment
            status = bus.Start();
            Assert.Equal(AllJoyn.QStatus.OK, status);

            // connect to the bus
            status = bus.Connect(AllJoynTestCommon.GetConnectSpec());
            Assert.Equal(AllJoyn.QStatus.OK, status);

            bus.RegisterBusListener(busListener);
            Wait(MaxWaitTime);
            Assert.Equal(true, listenerRegistered);

            bus.UnregisterBusListener(busListener);
            Wait(MaxWaitTime);
            Assert.Equal(true, listenerUnregistered);

            // TODO: move these into a teardown method?
            busListener.Dispose();
            bus.Dispose();
        }
Ejemplo n.º 2
0
        public void EnableConcurrentCallbacks_Used()
        {
            AllJoyn.QStatus status = AllJoyn.QStatus.FAIL;
            callbackStatus         = AllJoyn.QStatus.FAIL;
            listenerRegisteredFlag = false;
            nameOwnerChangedFlag   = false;

            mbus = new AllJoyn.BusAttachment("BusListenerTest", true);
            AllJoyn.BusListener busListener = new BusListenerEnableConcurrentCallbacks(this);

            // start the bus attachment
            status = mbus.Start();
            Assert.Equal(AllJoyn.QStatus.OK, status);

            // connect to the bus
            status = mbus.Connect(AllJoynTestCommon.GetConnectSpec());
            Assert.Equal(AllJoyn.QStatus.OK, status);

            mbus.RegisterBusListener(busListener);
            Wait(MaxWaitTime);
            Assert.True(listenerRegisteredFlag);

            mbus.RequestName(ObjectName, 0);
            Wait(MaxWaitTime);
            Assert.True(nameOwnerChangedFlag);
            Assert.Equal(AllJoyn.QStatus.OK, callbackStatus);

            mbus.UnregisterBusListener(busListener);
            mbus.Stop();
            mbus.Join();
            mbus.Dispose();
        }
Ejemplo n.º 3
0
        protected virtual void Dispose(bool disposing)
        {
            if (!this.disposed)
            {
                mbus.ReleaseName(ObjectName);

                mbus.UnregisterBusListener(busListener);
                mbus.Stop();
                mbus.Join();

                if (disposing)
                {
                    mbus.Dispose();
                }
                disposed = true;
            }
        }
Ejemplo n.º 4
0
        public void EnableConcurrentCallbacks_Not_Used()
        {
            AllJoyn.QStatus status = AllJoyn.QStatus.FAIL;
            callbackStatus         = AllJoyn.QStatus.FAIL;
            listenerRegisteredFlag = false;
            nameOwnerChangedFlag   = false;

            mbus = new AllJoyn.BusAttachment("BusListenerTest", true);
            AllJoyn.BusListener busListener = new BusListenerWithBlockingCall(this);

            // start the bus attachment
            status = mbus.Start();
            Assert.Equal(AllJoyn.QStatus.OK, status);

            // connect to the bus
            status = mbus.Connect(AllJoynTestCommon.GetConnectSpec());
            Assert.Equal(AllJoyn.QStatus.OK, status);

            mbus.RegisterBusListener(busListener);
            Wait(MaxWaitTime);
            Assert.True(listenerRegisteredFlag);

            mbus.RequestName(ObjectName, 0);
            Wait(MaxWaitTime);
            Assert.True(nameOwnerChangedFlag);

            /*
             * Because of the way that callback functions are defered we can still make
             * what would be a blocking call in alljoyn_core and it is not a blocking
             * call in Unity.  This is a by product of the alljoyn_c deffered callback class
             * and its usage.  I am still investigating ways to work around issues caused
             * by the deffered callback class at some point in the future may start to work
             * as alljoyn_core.
             * Assert.Equal(AllJoyn.QStatus.BUS_BLOCKING_CALL_NOT_ALLOWED, callbackStatus);
             */
            Assert.Equal(AllJoyn.QStatus.OK, callbackStatus);
            mbus.UnregisterBusListener(busListener);
            mbus.Stop();
            mbus.Join();
            mbus.Dispose();
        }
Ejemplo n.º 5
0
        public void Properties()
        {
            //SetUp Service
            //start service BusAttachment
            AllJoyn.BusAttachment serviceBus = new AllJoyn.BusAttachment("MessageTestService", true);
            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.Start());
            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.Connect(AllJoynTestCommon.GetConnectSpec()));

            TestBusListener testBusListener = new TestBusListener(this);

            serviceBus.RegisterBusListener(testBusListener);

            //Create and activate the service Interface
            AllJoyn.InterfaceDescription testIntf = null;
            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.CreateInterface(INTERFACE_NAME, out testIntf));
            Assert.NotNull(testIntf);
            Assert.Equal(AllJoyn.QStatus.OK, testIntf.AddMember(AllJoyn.Message.Type.MethodCall, "ping", "s", "s", "in,out"));
            testIntf.Activate();

            //create and register BusObject
            MessageTestBusObject busObj = new MessageTestBusObject(OBJECT_PATH);

            busObj.AddInterface(testIntf);
            AllJoyn.InterfaceDescription.Member ping;
            ping = testIntf.GetMember("ping");
            Assert.NotNull(ping);

            Assert.Equal(AllJoyn.QStatus.OK, busObj.AddMethodHandler(ping, busObj.Ping));

            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.RegisterBusObject(busObj));

            _nameOwnerChangedFlag = false;
            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.RequestName(WELLKNOWN_NAME, AllJoyn.DBus.NameFlags.ReplaceExisting |
                                                                    AllJoyn.DBus.NameFlags.DoNotQueue |
                                                                    AllJoyn.DBus.NameFlags.AllowReplacement));
            Wait(TimeSpan.FromSeconds(2));

            Assert.True(_nameOwnerChangedFlag);


            // SetUp Client
            // start client BusAttachment
            AllJoyn.BusAttachment clientBus = new AllJoyn.BusAttachment("MessageTestClient", true);
            Assert.Equal(AllJoyn.QStatus.OK, clientBus.Start());
            Assert.Equal(AllJoyn.QStatus.OK, clientBus.Connect(AllJoynTestCommon.GetConnectSpec()));

            AllJoyn.ProxyBusObject proxyObj = new AllJoyn.ProxyBusObject(clientBus, INTERFACE_NAME, OBJECT_PATH, 0);

            Assert.Equal(AllJoyn.QStatus.OK, proxyObj.IntrospectRemoteObject());

            AllJoyn.Message reply = new AllJoyn.Message(clientBus);
            AllJoyn.MsgArg  input = new AllJoyn.MsgArg("s", "AllJoyn");

            proxyObj.MethodCall(INTERFACE_NAME, "ping", input, reply, 25000, 0);

            // Actual tests for GetArg/GetArgs
            // check the message properties
            Assert.False(reply.IsBroadcastSignal);
            Assert.False(reply.IsGlobalBroadcast);
            Assert.False(reply.IsSessionless);
            Assert.False(reply.IsExpired());
            uint timeLeft;

            reply.IsExpired(out timeLeft);
            Assert.True(timeLeft > 0);
            Assert.False(reply.IsUnreliable);
            Assert.False(reply.IsEncrypted);
            // we don't expect any flags
            Assert.Equal((byte)0, reply.Flags);
            // no security is being used so there should be no security mechanism
            Assert.Equal("", reply.AuthMechanism);
            Assert.Equal(AllJoyn.Message.Type.MethodReturn, reply.MessageType);
            // The serial is unknown before hand but it should not be zero
            Assert.NotEqual <uint>(0u, reply.CallSerial);
            Assert.NotEqual <uint>(0u, reply.ReplySerial);
            // A method return does not have an Object Path
            Assert.Equal("", reply.ObjectPath);
            // A method return does not have an interface specified
            Assert.Equal("", reply.Interface);
            // The member name is not specified on a message return
            Assert.Equal("", reply.MemberName);
            // TODO possible error the documentation for Sender states it should
            // be returning the well-known name however in this case it is
            // returning the unique name of the sender.
            Assert.Equal(serviceBus.UniqueName, reply.Sender);
            Assert.Equal(clientBus.UniqueName, reply.ReceiveEndPointName);
            Assert.Equal(clientBus.UniqueName, reply.Destination);
            Assert.Equal(0u, reply.CompressionToken);
            // no session set up for this test Session Id should be 0
            Assert.Equal(0u, reply.SessionId);
            String errorMsg;

            // TODO produce test that generates actual error Message
            Assert.Null(reply.GetErrorName(out errorMsg));
            Assert.Equal("", errorMsg);
            // The  ToString method only returns a string when running debug code
#if DEBUG
            Assert.True(reply.ToString().StartsWith("<message endianness="));
            Assert.True(reply.ToString().Contains("<header field=\"REPLY_SERIAL\">"));
            Assert.True(reply.ToString().Contains("<header field=\"DESTINATION\">"));
            Assert.True(reply.ToString().Contains("<header field=\"SENDER\">"));
            Assert.True(reply.ToString().Contains("<header field=\"SIGNATURE\">"));
            Assert.True(reply.ToString().Contains("<signature>s</signature>"));
            Assert.True(reply.ToString().Contains("<string>AllJoyn</string>"));
            Assert.True(reply.ToString().EndsWith("</message>"));

            // this call to description should return 'METHID_RET[<reply serial>](s)'
            Assert.True(reply.Description.StartsWith("METHOD_RET["));
#else
            Assert.Equal("", reply.ToString());
            Assert.Equal("", reply.Description);
#endif
            // TODO figure out a good way to test the TimeStamp property
            //reply.TimeStamp

            // CleanUp
            serviceBus.UnregisterBusListener(testBusListener);
            reply.Dispose();
            input.Dispose();
            proxyObj.Dispose();
            clientBus.Dispose();

            testBusListener.Dispose();
            busObj.Dispose();
            serviceBus.Dispose();
        }
Ejemplo n.º 6
0
        public void GetArgs()
        {
            //SetUp Service
            //start service BusAttachment
            AllJoyn.BusAttachment serviceBus = new AllJoyn.BusAttachment("MessageTestService", true);
            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.Start());
            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.Connect(AllJoynTestCommon.GetConnectSpec()));

            TestBusListener testBusListener = new TestBusListener(this);

            serviceBus.RegisterBusListener(testBusListener);

            //Create and activate the service Interface
            AllJoyn.InterfaceDescription testIntf = null;
            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.CreateInterface(INTERFACE_NAME, out testIntf));
            Assert.NotNull(testIntf);
            Assert.Equal(AllJoyn.QStatus.OK, testIntf.AddMember(AllJoyn.Message.Type.MethodCall, "ping", "s", "s", "in,out"));
            testIntf.Activate();

            //create and register BusObject
            MessageTestBusObject busObj = new MessageTestBusObject(OBJECT_PATH);

            busObj.AddInterface(testIntf);
            AllJoyn.InterfaceDescription.Member ping;
            ping = testIntf.GetMember("ping");
            Assert.NotNull(ping);

            Assert.Equal(AllJoyn.QStatus.OK, busObj.AddMethodHandler(ping, busObj.Ping));

            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.RegisterBusObject(busObj));

            _nameOwnerChangedFlag = false;
            Assert.Equal(AllJoyn.QStatus.OK, serviceBus.RequestName(WELLKNOWN_NAME, AllJoyn.DBus.NameFlags.ReplaceExisting |
                                                                    AllJoyn.DBus.NameFlags.DoNotQueue |
                                                                    AllJoyn.DBus.NameFlags.AllowReplacement));
            Wait(TimeSpan.FromSeconds(2));
            Assert.True(_nameOwnerChangedFlag);


            //SetUp Client
            //start client BusAttachment
            AllJoyn.BusAttachment clientBus = new AllJoyn.BusAttachment("MessageTestClient", true);
            Assert.Equal(AllJoyn.QStatus.OK, clientBus.Start());
            Assert.Equal(AllJoyn.QStatus.OK, clientBus.Connect(AllJoynTestCommon.GetConnectSpec()));

            AllJoyn.ProxyBusObject proxyObj = new AllJoyn.ProxyBusObject(clientBus, WELLKNOWN_NAME, OBJECT_PATH, 0);

            Assert.Equal(AllJoyn.QStatus.OK, proxyObj.IntrospectRemoteObject());

            AllJoyn.Message reply = new AllJoyn.Message(clientBus);
            AllJoyn.MsgArg  input = new AllJoyn.MsgArg("s", "AllJoyn");

            proxyObj.MethodCall(INTERFACE_NAME, "ping", input, reply, 25000, 0);

            //Actual tests for GetArg/GetArgs
            // call using GetArg specifying the array index
            Assert.Equal("AllJoyn", (string)reply.GetArg(0));
            // use the this[] operator call to get the MsgArg
            Assert.Equal("AllJoyn", (string)(reply[0]));
            // Return the MsgArgs note could be multiple values
            AllJoyn.MsgArg replyArg = reply.GetArgs();
            Assert.Equal(1, replyArg.Length);
            Assert.Equal("AllJoyn", (string)replyArg);
            // Parse the Message Drectly
            object replyString;

            Assert.Equal(AllJoyn.QStatus.OK, reply.GetArgs("s", out replyString));
            Assert.Equal("AllJoyn", (string)replyString);

            serviceBus.UnregisterBusListener(testBusListener);
            reply.Dispose();
            input.Dispose();
            proxyObj.Dispose();
            clientBus.Dispose();

            testBusListener.Dispose();
            busObj.Dispose();
            serviceBus.Dispose();
        }