//EntityId + Constraint.
private void GetAlignmentEntitiesInfo(String alignmentName)
{
ObjectId alignOid = doc.GetSitelessAlignmentId(alignmentName);
Alignment align = ts.GetObject(alignOid, OpenMode.ForRead) as Alignment;
m_editor.WriteMessage("\n---------User Story 4 :Alignment Entities properties- begin----------------\n");
AlignmentEntityCollection alignColl = align.Entities;
int count = alignColl.Count;
int alignID = alignColl.FirstEntity;
while (true)
{
AlignmentEntity alignEntity = alignColl.EntityAtId(alignID);
Debug.Assert(alignID == alignEntity.EntityId);
//m_editor.WriteMessage("Alignment EntityId : {0} Constraint : {1}\n", alignEntity.EntityId, alignEntity.Constraint);
if (alignID == alignColl.LastEntity)
{
break;
}
alignID = alignEntity.EntityAfter;
}
}
copyAlignFromXref(ObjectId idAlign, string strSource)
{
Alignment objAlign = (Alignment)idAlign.getEnt();
AlignmentEntityCollection objAlignEnts = default(AlignmentEntityCollection);
AlignmentEntity objAlignEnt = default(AlignmentEntity);
AlignmentArc objAlignEntArc = default(AlignmentArc);
AlignmentLine objAlignEntTan = default(AlignmentLine);
Point2d pnt2dBeg = objAlign.ReferencePoint;
double dblStationStart = objAlign.ReferencePointStation;
string strAlignName = objAlign.Name;
StationEquationCollection objStationEQs = objAlign.StationEquations;
List <AlgnEntData> varAlignEntData = listAlignEnts(objAlign);
objAlignEnts = objAlign.Entities;
List <Vertex2d> pnts2dPoly = new List <Vertex2d>();
double bulge = 0;
for (int i = 0; i < varAlignEntData.Count; i++)
{
objAlignEnt = objAlignEnts.EntityAtId(varAlignEntData[i].ID);
if (objAlignEnt.EntityType == AlignmentEntityType.Arc)
{
objAlignEntArc = (AlignmentArc)objAlignEnt;
if (i == objAlignEnts.Count - 1)
{
bulge = System.Math.Tan(objAlignEntArc.Delta / 4);
if (objAlignEntArc.Clockwise)
{
bulge = bulge * -1.0;
}
pnts2dPoly.Add(new Vertex2d(new Point3d(objAlignEntArc.StartPoint.X, objAlignEntArc.StartPoint.Y, 0), bulge, 0, 0, 0));
pnts2dPoly.Add(new Vertex2d(new Point3d(objAlignEntArc.EndPoint.X, objAlignEntArc.EndPoint.Y, 0), 0, 0, 0, 0));
}
else
{
bulge = System.Math.Tan(objAlignEntArc.Delta / 4);
if (objAlignEntArc.Clockwise)
{
bulge = bulge * -1;
}
pnts2dPoly.Add(new Vertex2d(new Point3d(objAlignEntArc.StartPoint.X, objAlignEntArc.StartPoint.Y, 0), bulge, 0, 0, 0));
}
}
else if (objAlignEnt.EntityType == AlignmentEntityType.Line)
{
objAlignEntTan = (AlignmentLine)objAlignEnt;
if (i == objAlignEnts.Count - 1)
{
pnts2dPoly.Add(new Vertex2d(new Point3d(objAlignEntTan.StartPoint.X, objAlignEntTan.StartPoint.Y, 0), 0, 0, 0, 0));
pnts2dPoly.Add(new Vertex2d(new Point3d(objAlignEntTan.EndPoint.X, objAlignEntTan.EndPoint.Y, 0), 0, 0, 0, 0));
}
else
{
pnts2dPoly.Add(new Vertex2d(new Point3d(objAlignEntTan.StartPoint.X, objAlignEntTan.StartPoint.Y, 0), 0, 0, 0, 0));
}
}
}
ObjectId idPoly = Draw.addPoly(pnts2dPoly);
string strLayer = "";
if (strSource == "WALLDESIGN")
{
strLayer = "WALL-PROFILE";
}
else
{
strLayer = strSource;
}
Layer.manageLayers(strLayer);
Alignment objAlignNew = null;
try
{
objAlignNew = Align.addAlignmentFromPoly(strAlignName, strLayer, idPoly, "Standard", "Standard", true);
}
catch (System.Exception ex)
{
System.Diagnostics.Debug.Print(ex.ToString());
return(null);
}
objAlignNew.ReferencePointStation = dblStationStart;
double dblStaBack = 0;
double dblStaAhead = 0;
StationEquationType objStaEqType = default(StationEquationType);
for (int i = 0; i <= objStationEQs.Count - 1; i++)
{
dblStaBack = objStationEQs[i].RawStationBack;
dblStaAhead = objStationEQs[i].StationAhead;
objStaEqType = objStationEQs[i].EquationType;
objAlignNew.StationEquations.Add(dblStaBack, dblStaAhead, objStaEqType);
}
return(objAlignNew);
}
makePipeNetwork(ObjectId idAlign, string nameNetwork, string pipeType)
{
string pntDesc = fMNP.pntDesc;
Point3d pnt3dPick = Pub.pnt3dO;
if (idAlign == ObjectId.Null)
{
Autodesk.AutoCAD.DatabaseServices.Entity ent = Select.selectEntity(typeof(Alignment), "Select Alignment: ", "Selected object was not an alignment. Try again: ", out pnt3dPick);
idAlign = ent.ObjectId;
}
Network net = null;
ObjectIdCollection ids = CivilApplication.ActiveDocument.GetPipeNetworkIds();
ObjectId idNet = ObjectId.Null;
if (ids.Count == 0)
{
idNet = Network.Create(CivilApplication.ActiveDocument, ref nameNetwork);
}
else
{
for (int i = 0; i < ids.Count; i++)
{
net = (Network)ids[i].getEnt();
//if (net.Name == nameNetwork){
// string index = Align.getAlignIndex(nameNetwork);
// nameNetwork = string.Format("{0}-{1}", nameNetwork, index);
// break;
//}
}
idNet = Network.Create(CivilApplication.ActiveDocument, ref nameNetwork);
}
bool exists = false;
Alignment align = (Alignment)idAlign.getEnt();
AlignmentEntityCollection ents = align.Entities;
TinSurface tinSurfDE = Surf.getTinSurface("CPNT-ON", out exists);
List <AlgnEntData> algnData = MNP_Align.sortAlignEnts(align);
List <string> hPipe = new List <string>();
List <ObjectId> idsCgPnt = new List <ObjectId>();
ObjectId idPipe, idPipeSize, idStruct, idStructSize;
using (Transaction tr = BaseObjs.startTransactionDb())
{
net = (Network)tr.GetObject(idNet, OpenMode.ForWrite);
net.ReferenceAlignmentId = idAlign;
net.ReferenceSurfaceId = Surf.getTinSurface("CPNT-ON", out exists).ObjectId;
ObjectId idPartsList = CivilApplication.ActiveDocument.Styles.PartsListSet["Standard"];
PartsList partsList = (PartsList)tr.GetObject(idPartsList, OpenMode.ForRead);
idPipe = partsList["Concrete Pipe"];
PartFamily partFamily = (PartFamily)tr.GetObject(idPipe, OpenMode.ForWrite);
idPipeSize = partFamily[0];
PartSize partSize = (PartSize)tr.GetObject(idPipeSize, OpenMode.ForRead);
PartDataRecord pdr = partSize.SizeDataRecord;
PartDataField[] pdf = pdr.GetAllDataFields();
for (int i = 0; i < pdf.Length; i++)
{
System.Diagnostics.Debug.Print(string.Format("{0}: {1}", pdf[i].Description, pdf[i].Value.ToString()));
}
idStruct = partsList["Rectangular Structure Slab Top Rectangular Frame"];
partFamily = (PartFamily)tr.GetObject(idStruct, OpenMode.ForWrite);
idStructSize = partFamily[0];
double depth = -6, slope = 0, dZ = 0, top = 0;
double diam = double.Parse(pdf[0].Value.ToString()) / 12;
ObjectId idPipeNew = ObjectId.Null;
AlignmentEntity ent = null;
Structure sPrev = null;
uint pntNum = 0;
ObjectId idCgPntBeg, idCgPntEnd, idCgPntPrev = ObjectId.Null;
TypedValue[] tvs;
for (int i = 0; i < algnData.Count; i++)
{
if (algnData.Count == 1)
{
ent = ents[0];
}
else
{
ent = ents.EntityAtId(algnData[i].ID);
}
ObjectId idStructNew = ObjectId.Null;
Structure s = null;
Pipe p = null;
if (ent.EntityType == AlignmentEntityType.Line)
{
AlignmentLine line = (AlignmentLine)ent;
Point2d pnt2dBeg = line.StartPoint;
Point2d pnt2dEnd = line.EndPoint;
try
{
top = tinSurfDE.FindElevationAtXY(pnt2dBeg.X, pnt2dBeg.Y) + depth;
}
catch (System.Exception)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Pipe endpoint is beyond limit of design surface");
return;
}
Point3d pnt3dBeg = new Point3d(pnt2dBeg.X, pnt2dBeg.Y, top);
try
{
top = tinSurfDE.FindElevationAtXY(pnt2dEnd.X, pnt2dEnd.Y) + depth;
}
catch (System.Exception)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Pipe endpoint is beyond limit of design surface");
return;
}
Point3d pnt3dEnd = new Point3d(pnt2dEnd.X, pnt2dEnd.Y, top);
LineSegment3d seg3d = new LineSegment3d(pnt3dBeg, pnt3dEnd);
net.AddLinePipe(idPipe, idPipeSize, seg3d, ref idPipeNew, true);
p = (Pipe)idPipeNew.getEnt();
p.AddToProfileView(fMNP.idProfileView);
ObjectId idPart = getProfileViewPart();
slope = pnt3dBeg.getSlope(pnt3dEnd);
dZ = diam / (2 * (System.Math.Cos(System.Math.Atan(System.Math.Abs(slope)))));
if (i == 0)
{
pnt3dBeg = new Point3d(pnt3dBeg.X, pnt3dBeg.Y, pnt3dBeg.Z - dZ);
pnt3dEnd = new Point3d(pnt3dEnd.X, pnt3dEnd.Y, pnt3dEnd.Z - dZ);
idCgPntBeg = pnt3dBeg.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntBeg);
idCgPntEnd = pnt3dEnd.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntEnd);
idCgPntPrev = idCgPntEnd;
tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, idCgPntBeg.getHandle().ToString()), 1);
tvs.SetValue(new TypedValue(1005, idCgPntEnd.getHandle().ToString()), 2);
//idPart.setXData(rb, apps.lnkMNP);
idPipeNew.setXData(tvs, apps.lnkMNP);
net.AddStructure(idStruct, idStructSize, pnt3dBeg, 0, ref idStructNew, true);
s = (Structure)idStructNew.getEnt();
s.AddToProfileView(fMNP.idProfileView);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.Start);
net.AddStructure(idStruct, idStructSize, pnt3dEnd, 0, ref idStructNew, true);
s = (Structure)idStructNew.getEnt();
s.AddToProfileView(fMNP.idProfileView);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.End);
sPrev = s;
hPipe.Add(idPipeNew.getHandle().ToString());
}
else
{
pnt3dEnd = new Point3d(pnt3dEnd.X, pnt3dEnd.Y, pnt3dEnd.Z - dZ);
idCgPntEnd = pnt3dEnd.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntEnd);
tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, idCgPntPrev.getHandle().ToString()), 1);
tvs.SetValue(new TypedValue(1005, idCgPntEnd.getHandle().ToString()), 2);
//idPart.setXData(rb, apps.lnkMNP);
idPipeNew.setXData(tvs, apps.lnkMNP);
idCgPntPrev = idCgPntEnd;
net.AddStructure(idStruct, idStructSize, pnt3dEnd, 0, ref idStructNew, true);
s = (Structure)idStructNew.getEnt();
s.AddToProfileView(fMNP.idProfileView);
sPrev.ConnectToPipe(idPipeNew, ConnectorPositionType.Start);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.End);
sPrev = s;
hPipe.Add(idPipeNew.getHandle().ToString());
}
}
else if (ent.EntityType == AlignmentEntityType.Arc)
{
AlignmentArc arc = (AlignmentArc)ent;
double radius = arc.Radius;
Point2d pnt2dBeg = arc.StartPoint;
Point2d pnt2dEnd = arc.EndPoint;
try
{
top = tinSurfDE.FindElevationAtXY(pnt2dBeg.X, pnt2dBeg.Y) + depth;
}
catch (System.Exception)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Pipe endpoint is beyond limit of design surface");
return;
}
Point3d pnt3dBeg = new Point3d(pnt2dBeg.X, pnt2dBeg.Y, top);
try
{
top = tinSurfDE.FindElevationAtXY(pnt2dEnd.X, pnt2dEnd.Y) + depth;
}
catch (System.Exception)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("Pipe endpoint is beyond limit of design surface");
return;
}
IntPtr iptr = (IntPtr)0;
Point3d pnt3dEnd = new Point3d(pnt2dEnd.X, pnt2dEnd.Y, top);
Arc a = new Arc();
a.Radius = arc.Radius;
a.StartPoint = new Point3d(pnt2dBeg.X, pnt2dBeg.Y, 0);
a.EndPoint = new Point3d(pnt2dEnd.X, pnt2dEnd.Y, 0);
a.Center = new Point3d(arc.CenterPoint.X, arc.CenterPoint.Y, 0);
Curve3d c = (Curve3d)a.GetGeCurve();
net.AddCurvePipe(idPipe, idPipeSize, c, arc.Clockwise, ref idPipeNew, true);
p = (Pipe)idPipeNew.getEnt();
p.AddToProfileView(fMNP.idProfileView);
ObjectId idPart = getProfileViewPart();
slope = (pnt3dEnd.Z - pnt3dBeg.Z) / arc.Length;
dZ = diam / (2 * (System.Math.Cos(System.Math.Atan(System.Math.Abs(slope)))));
if (i == 0)
{
pnt3dBeg = new Point3d(pnt3dBeg.X, pnt3dBeg.Y, pnt3dBeg.Z - dZ);
pnt3dEnd = new Point3d(pnt3dEnd.X, pnt3dEnd.Y, pnt3dEnd.Z - dZ);
idCgPntBeg = pnt3dBeg.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntBeg);
idCgPntEnd = pnt3dEnd.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntEnd);
tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, idCgPntBeg.getHandle().ToString()), 1);
tvs.SetValue(new TypedValue(1005, idCgPntEnd.getHandle().ToString()), 2);
//idPart.setXData(rb, apps.lnkMNP);
idPipeNew.setXData(tvs, apps.lnkMNP);
net.AddStructure(idStruct, idStructSize, pnt3dBeg, 0, ref idStructNew, true);
s = (Structure)tr.GetObject(idStructNew, OpenMode.ForWrite);
s.AddToProfileView(fMNP.idProfileView);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.Start);
net.AddStructure(idStruct, idStructSize, pnt3dBeg, 0, ref idStructNew, true);
s = (Structure)tr.GetObject(idStructNew, OpenMode.ForWrite);
s.AddToProfileView(fMNP.idProfileView);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.End);
sPrev = s;
hPipe.Add(idPipeNew.getHandle().ToString());
}
else
{
pnt3dEnd = new Point3d(pnt3dEnd.X, pnt3dEnd.Y, pnt3dEnd.Z - dZ);
idCgPntEnd = pnt3dEnd.setPoint(out pntNum, pntDesc);
idsCgPnt.Add(idCgPntEnd);
tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, idCgPntPrev.getHandle().ToString()), 1);
tvs.SetValue(new TypedValue(1005, idCgPntEnd.getHandle().ToString()), 2);
//idPart.setXData(rb, apps.lnkMNP);
idPipeNew.setXData(tvs, apps.lnkMNP);
idCgPntPrev = idCgPntEnd;
net.AddStructure(idStruct, idStructSize, pnt3dBeg, 0, ref idStructNew, true);
s = (Structure)tr.GetObject(idStructNew, OpenMode.ForWrite);
s.AddToProfileView(fMNP.idProfileView);
sPrev.ConnectToPipe(idPipeNew, ConnectorPositionType.Start);
s.ConnectToPipe(idPipeNew, ConnectorPositionType.End);
sPrev = s;
hPipe.Add(idPipeNew.getHandle().ToString());
}
}
}
tr.Commit();
}
hPipe.Insert(0, "-1");
hPipe.Add("-1");
for (int i = 0; i < idsCgPnt.Count; i++)
{
TypedValue[] tvs = new TypedValue[3];
tvs.SetValue(new TypedValue(1001, apps.lnkMNP), 0);
tvs.SetValue(new TypedValue(1005, hPipe[i]), 1);
tvs.SetValue(new TypedValue(1005, hPipe[i + 1]), 2);
idsCgPnt[i].setXData(tvs, apps.lnkMNP);
}
}