public static void EnableRxFramerPrbs([Values(Mykonos.MYK_PRBS_ORDER.PRBS7, Mykonos.MYK_PRBS_ORDER.PRBS15, Mykonos.MYK_PRBS_ORDER.PRBS31)] Mykonos.MYK_PRBS_ORDER prbsorder)
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
//reset the device
Link.Mykonos.resetDevice();
System.Threading.Thread.Sleep(100);
//setting SPI channel for 4-wire mode
Link.setSpiChannel(1);
Link.spiWrite(0x000, 0x18);
Link.Mykonos.enableRxFramerPrbs(prbsorder, 1);
byte PRBSspi = Link.spiRead(0x72);
if (prbsorder == Mykonos.MYK_PRBS_ORDER.PRBS7)
{
Assert.AreEqual(PRBSspi, 0x01, "PRBS7 mismatch");
}
else if (prbsorder == Mykonos.MYK_PRBS_ORDER.PRBS15)
{
Assert.AreEqual(PRBSspi, 0x03, "PRBS15 mismatch");
}
else
{
Assert.AreEqual(PRBSspi, 0x05, "PRBS31 mismatch");
}
Link.Disconnect();
}
public static void MykonosReadTIA3dbCorner()
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.setSpiChannel(TestSetup.MykonosSpi);
//Just for debug -read TIA 3dB corner
byte spiReg = 0;
double rx1TiaCap = 480; //fF
double rx2TiaCap = 480; //fF
spiReg = Link.spiRead(0x224); Debug.WriteLine("0xRCAL code = " + spiReg.ToString("X"));
spiReg = Link.spiRead(0x693); Debug.WriteLine("0x693 = " + spiReg.ToString("X"));
rx1TiaCap += ((spiReg & 0x3F) * 10);
spiReg = Link.spiRead(0x694); Debug.WriteLine("0x694 = " + spiReg.ToString("X"));
rx1TiaCap += ((spiReg & 0x1F) * 320);
Console.WriteLine("Rx1 TIA 3dB corner = " + (1 / (2 * System.Math.PI * 1100 * rx1TiaCap * System.Math.Pow(10, -9))) + " MHz");
spiReg = Link.spiRead(0x695); Debug.WriteLine("0x695 = " + spiReg.ToString("X"));
rx2TiaCap += ((spiReg & 0x3F) * 10);
spiReg = Link.spiRead(0x696); Debug.WriteLine("0x696 = " + spiReg.ToString("X"));
rx2TiaCap += ((spiReg & 0x1F) * 320);
Console.WriteLine("Rx1 TIA 3dB corner = " + (1 / (2 * System.Math.PI * 1100 * rx2TiaCap * System.Math.Pow(10, -9))) + " MHz");
Link.Disconnect();
}
public static void MykonosCheckRxFramerLink()
{
//TODO: Possible convert these to SPI Writes
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.setSpiChannel(TestSetup.MykonosSpi);
byte status = Link.Mykonos.readRxFramerStatus();
Console.WriteLine("Framer Status: " + status.ToString("X"));
Assert.AreEqual(0x20, (status & 0x20), "SYSREF not received by Mykonos Rx Framer IP");
status = Link.Mykonos.readOrxFramerStatus();
Console.WriteLine("ObsRx Framer Status: " + status.ToString("X"));
Assert.AreEqual(0x20, (status & 0x20), "SYSREF not received by Mykonos ObsRx Framer IP");
UInt32 syncStatus = Link.FpgaMykonos.readSyncbStatus();
Console.WriteLine("SYNC Status: " + syncStatus.ToString("X"));
Assert.AreEqual(0x02, (syncStatus & 0x2), "RXSYNBC not asserted, Rx JESD204 Link down.");
Link.Disconnect();
}
public static void EnableDeframerPrbsChecker([Values(Mykonos.MYK_PRBS_ORDER.PRBS7, Mykonos.MYK_PRBS_ORDER.PRBS15, Mykonos.MYK_PRBS_ORDER.PRBS31)] Mykonos.MYK_PRBS_ORDER prbsorder)
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
//setting SPI channel for 4-wire mode
Link.setSpiChannel(1);
Link.spiWrite(0x000, 0x18);
Link.Mykonos.enableDeframerPrbsChecker(0xF, prbsorder, 1);
byte PRBSspi = Link.spiRead(0xA5);
if (prbsorder == Mykonos.MYK_PRBS_ORDER.PRBS7)
{
Assert.AreEqual(PRBSspi, 0xF1, "PRBS7 mismatch");
}
else if (prbsorder == Mykonos.MYK_PRBS_ORDER.PRBS15)
{
Assert.AreEqual(PRBSspi, 0xF3, "PRBS15 mismatch");
}
else
{
Assert.AreEqual(PRBSspi, 0xF5, "PRBS31 mismatch");
}
Link.Disconnect();
}
public static void SetTxPllFrequencyTo700Mhz()
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.setSpiChannel(MykonosSpi);
Link.Mykonos.setRfPllFrequency(Mykonos.PLLNAME.TX_PLL, 700000000);
System.Threading.Thread.Sleep(1000);
byte spiData1 = 0x0;
//Check Tx PLL Lock
spiData1 = Link.spiRead(0x2C7); Console.WriteLine("Myk: Tx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Tx CLK Syn not locked");
//Check Tx VCO Divider,
//For 700Mhz Expecting 0x3
spiData1 = Link.spiRead(0x2F2); Console.WriteLine("SPI Addr: 0x2F2:" + spiData1.ToString("X"));
Assert.AreEqual(0x03, spiData1 & 0x0F, "Myk: Tx VCO Divider not as expected");
//Check Tx Synth SDM Integer
//For 700Mhz ref Clock 61.44Mhz Expecting 0x0B6
spiData1 = Link.spiRead(0x2B1); Console.WriteLine("SPI Addr: 0x2B1:" + spiData1.ToString("X"));
Assert.AreEqual(0xB6, spiData1 & 0xFF, "Myk: Tx Synth SDM Int not as expected");
spiData1 = Link.spiRead(0x2B2); Console.WriteLine("SPI Addr: 0x2B2:" + spiData1.ToString("X"));
Assert.AreEqual(0x00, spiData1 & 0x07, "Myk: Tx Synth SDM Int not as expected");
//Check Tx Synth SDM FRAC
//For 700Mhz ref Clock 61.44Mhz Expecting 0x255300
spiData1 = Link.spiRead(0x2B3); Console.WriteLine("SPI Addr: 0x2B3:" + spiData1.ToString("X"));
Assert.AreEqual(0x00, spiData1 & 0xFF, "Myk: Tx Synth SDM LBS Int not as expected");
spiData1 = Link.spiRead(0x2B4); Console.WriteLine("SPI Addr: 0x2B4:" + spiData1.ToString("X"));
Assert.AreEqual(0x53, spiData1 & 0xFF, "Myk: Tx Synth SDM Int not as expected");
spiData1 = Link.spiRead(0x2B5); Console.WriteLine("SPI Addr: 0x2B5:" + spiData1.ToString("X"));
Assert.AreEqual(0x25, spiData1 & 0x7F, "Myk: Tx Synth SDM Int MSB not as expected");
//Check All PLL Lock Status
spiData1 = Link.spiRead(0x157); Console.WriteLine("Myk: Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: CLK PLL not locked");
spiData1 = Link.spiRead(0x257); Console.WriteLine("Myk: Rx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Rx CLK Syn not locked");
spiData1 = Link.spiRead(0x2C7); Console.WriteLine("Myk: Tx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Tx CLK Syn not locked");
spiData1 = Link.spiRead(0x357); Console.WriteLine("Myk: SnRx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: SnRx CLK Syn not locked");
spiData1 = Link.spiRead(0x17F); Console.WriteLine("Myk: Cal PLL Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Cal PLL not locked");
ulong readBack = 0;
Link.Mykonos.getRfPllFrequency(Mykonos.PLLNAME.TX_PLL, ref readBack);
Assert.AreEqual(700000000, readBack, "Tx PLL Frequency Readback Not as Expected");
Link.Disconnect();
}
public static void CheckRunInitCalsFromReady()
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.hw.ReceiveTimeout = 0;
Link.setSpiChannel(MykonosSpi);
byte spiData1 = 0x0;
Console.WriteLine("Starting CheckRunInitCalsFromReady Test");
//Test Setup Check ARM in READY STATE
spiData1 = Link.spiRead(0xD40);
Console.WriteLine("SPI Addr: 0xD40:" + spiData1.ToString("X"));
Assert.AreEqual(0x1, (spiData1 & 0x3), "Myk: Test Setup Failed Radio State is Not in READY STATE");
//Run Init Cals
UInt32 testCalMask = 0x0;
testCalMask = settings.calMask;
Console.WriteLine("Test Setup: Cals" + testCalMask.ToString("X"));
TestSetup.MykonosInitCals(settings);
System.Threading.Thread.Sleep(10000);
//Check ARM in INIT STATE
//Via SPI Readback
//Via API
UInt32 radioState = 0;
spiData1 = Link.spiRead(0xD40);
Console.WriteLine("SPI Addr: 0xD40:" + spiData1.ToString("X"));
Assert.AreEqual(0x2, (spiData1 & 0x3), "Myk: 1 Radio State is Not in INIT STATE");
Link.Mykonos.getRadioState(ref radioState);
Console.WriteLine("MYKONOS RadioState = " + radioState.ToString("X"));
Assert.AreEqual(0x2, (radioState & 0x3), "Myk: 2 Radio State not INIT");
//Check which Init calibrations were
//Completed Sucessfully during last RUN_INIT
byte[] armData = new byte[] { 0, 0, 0, 0, 0, 0, 0, 0 };
Link.Mykonos.sendArmCommand(GetCmd, new byte[] { IntCalsDoneObjId }, 1);
Link.Mykonos.readArmMem(0x20000000, 8, 1, ref armData);
//armData[1] is the calmask [15:8], and armData[0] is calmask[7:0] since last init
//armData[2] is the calmask [15:8], and armData[3] is calmask[7:0] since power up
Console.WriteLine("Init Cals Requested: " + testCalMask.ToString("X"));
Console.WriteLine("Init Cals Done Last Power Up: " + armData[2].ToString("X") + armData[3].ToString("X"));
Console.WriteLine("Init Cals Done Last Init: " + armData[1].ToString("X") + armData[0].ToString("X"));
Assert.AreEqual(testCalMask, ((UInt32)(((UInt32)(armData[1]) << 8) | ((UInt32)(armData[0])))),
"Init Cals did not match the mask written to ARM memory");
Link.Disconnect();
}
public static void MykonosCheckInitCals()
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.setSpiChannel(TestSetup.MykonosSpi);
Console.WriteLine("InitArmCal(0x" + settings.calMask.ToString("X") + ")");
Console.WriteLine("SPIRead x119: " + Link.spiRead(0x119).ToString("X"));
Console.WriteLine("SPIReadxD34: " + Link.spiRead(0xD34).ToString("X"));
Link.Disconnect();
}
public static void SweepTxPllFrequency()
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.setSpiChannel(1);
Link.Mykonos.init_clocks(settings.mykSettings.DeviceClock_kHz, 9830400, Mykonos.VCODIV.VCODIV_1, 4);
double[] freq = { 1.2605E+10, 1.2245E+10, 1.1906E+10, 1.1588E+10, 1.1288E+10, 1.1007E+10, 1.0742E+10, 1.0492E+10, 1.0258E+10, 1.0036E+10, 9.8278E+09, 9.6311E+09, 9.4453E+09, 9.2698E+09, 9.1036E+09, 8.9463E+09, 8.7970E+09, 8.6553E+09, 8.5206E+09, 8.3923E+09, 8.2699E+09, 8.1531E+09, 8.0414E+09, 7.9344E+09, 7.8318E+09, 7.7332E+09, 7.6384E+09, 7.5471E+09, 7.4590E+09, 7.3740E+09, 7.2919E+09, 7.2124E+09, 7.1355E+09, 7.0610E+09, 6.9887E+09, 6.9186E+09, 6.8506E+09, 6.7846E+09, 6.7205E+09, 6.6582E+09, 6.5978E+09, 6.5392E+09, 6.4823E+09, 6.4270E+09, 6.3734E+09, 6.3214E+09, 6.2709E+09, 6.2220E+09, 6.1745E+09, 6.1284E+09, 6.0836E+09, 6.0401E+09, 5.9977E+09 };
byte pllStatus = 0;
for (int i = 0; i <= 52; i++)
{
Link.Mykonos.setRfPllFrequency(Mykonos.PLLNAME.TX_PLL, (UInt64)(freq[i] / 4));
System.Threading.Thread.Sleep(100);
byte spiData1 = 0x0;
//Check PLL Lock Status
spiData1 = Link.spiRead(0x157); Console.WriteLine("Myk: Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: CLK PLL not locked");
spiData1 = Link.spiRead(0x257); Console.WriteLine("Myk: Rx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Rx CLK Syn not locked");
spiData1 = Link.spiRead(0x2C7); Console.WriteLine("Myk: Tx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Tx CLK Syn not locked");
spiData1 = Link.spiRead(0x357); Console.WriteLine("Myk: SnRx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: SnRx CLK Syn not locked");
spiData1 = Link.spiRead(0x17F); Console.WriteLine("Myk: Cal PLL Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Cal PLL not locked");
Console.WriteLine("Frequency: " + freq[i] / 4 + ", PLL Status: 0x" + pllStatus.ToString("X"));
//TODO: Check if these need to be Added to Pass Criteria
byte vcoOutLevel = (byte)(Link.spiRead(0x2BA) & 0x0F);
byte vcoVar = (byte)(Link.spiRead(0x2B9) & 0xF);
byte vcoBiasRef = (byte)(Link.spiRead(0x2C2) & 0x7);
byte vcoBiasTcf = (byte)((Link.spiRead(0x2C2) >> 3) & 0x3);
byte vcoCalOffset = (byte)((Link.spiRead(0x2B8) >> 3) & 0xF);
byte vcoVarRef = (byte)(Link.spiRead(0x2D1) & 0xF);
byte iCp = (byte)(Link.spiRead(0x2BB) & 0x3F);
byte lfC2 = (byte)((Link.spiRead(0x2BE) >> 4) & 0xF);
byte lfC1 = (byte)(Link.spiRead(0x2BE) & 0xF);
byte lfR1 = (byte)((Link.spiRead(0x2BF) >> 4) & 0xF);
byte lfC3 = (byte)(Link.spiRead(0x2BF) & 0xF);
byte lfR3 = (byte)(Link.spiRead(0x2C0) & 0xF);
Console.WriteLine(freq[i] + "\t" + vcoOutLevel + "\t" + vcoVar + "\t" + vcoBiasRef + "\t" + vcoBiasTcf + "\t" + vcoCalOffset + "\t" + vcoVarRef + "\t" + iCp + "\t" + lfC2 + "\t" + lfC1 + "\t" + lfR1 + "\t" + lfC3 + "\t" + lfR3);
}
Link.Disconnect();
}
public static void SetTxPllFrequency()
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.setSpiChannel(1);
//Link.spiWrite(0x2B0, 0x4);
//Link.spiWrite(0x233, 0x1B);
Link.Mykonos.setRfPllFrequency(Mykonos.PLLNAME.TX_PLL, 700000000);
System.Threading.Thread.Sleep(1000);
//Link.spiWrite(0x2B0, 0x05);
byte pllStatus = Link.Mykonos.checkPllsLockStatus();
Console.WriteLine("PLL Status: 0x" + pllStatus.ToString("X"));
UInt16[] spiAddr = new UInt16[35];
byte[] spiData = null;
for (int j = 0; j < 35; j++)
{
spiAddr[j] = (UInt16)(0x2B0 + j);
}
spiData = Link.spiRead(spiAddr);
for (int j = 0; j < 35; j++)
{
Console.WriteLine("SPI Addr: " + spiAddr[j].ToString("X") + ": " + spiData[j].ToString("X"));
}
byte spiData1 = Link.spiRead(0x382); Console.WriteLine("SPI Addr: 0x382:" + spiData1.ToString("X"));
spiData1 = Link.spiRead(0x230); Console.WriteLine("SPI Addr: 0x230:" + spiData1.ToString("X"));
spiData1 = Link.spiRead(0x231); Console.WriteLine("SPI Addr: 0x231:" + spiData1.ToString("X"));
spiData1 = Link.spiRead(0x232); Console.WriteLine("SPI Addr: 0x232:" + spiData1.ToString("X"));
spiData1 = Link.spiRead(0x233); Console.WriteLine("SPI Addr: 0x233:" + spiData1.ToString("X"));
spiData1 = Link.spiRead(0x157); Console.WriteLine("SPI Addr: 0x157:" + spiData1.ToString("X"));
spiData1 = Link.spiRead(0x257); Console.WriteLine("SPI Addr: 0x257:" + spiData1.ToString("X"));
spiData1 = Link.spiRead(0x2C7); Console.WriteLine("SPI Addr: 0x2C7:" + spiData1.ToString("X"));
spiData1 = Link.spiRead(0x357); Console.WriteLine("SPI Addr: 0x357:" + spiData1.ToString("X"));
spiData1 = Link.spiRead(0x17F); Console.WriteLine("SPI Addr: 0x17F:" + spiData1.ToString("X"));
Link.Disconnect();
}
public static void MykonosCheckTxDeFramerLink()
{
//TODO: Possible convert these to SPI Writes
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.setSpiChannel(TestSetup.MykonosSpi);
Console.WriteLine("Mykonos Deframer Status: " + Link.Mykonos.readDeframerStatus().ToString("X"));
byte spiReg = 0;
spiReg = Link.spiRead(0x1B0);
Console.WriteLine("SPI Reg x1B0 = " + spiReg.ToString("X"));
Link.Disconnect();
}
public static void ReadRxGainTable()
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
byte spiReg1 = 0;
byte spiReg2 = 0;
byte index = 0;
byte feGain = 0;
byte extControl = 0;
byte digGain = 0;
byte enableAtten = 0;
Link.setSpiChannel(1);
Link.spiWrite(0x00A, 0x84);
spiReg1 = Link.spiRead(0x00A); Console.WriteLine("Scratch Reg Test: " + spiReg1.ToString("X"));
Assert.AreEqual(0x84, spiReg1, "SPI not working");
Link.spiWrite(0x516, 0x0C); //Enable Rx1 gain table for readback
Int16[] coefs = new Int16[128];
for (byte i = 255; i > 128; i--)
{
Link.spiWrite(0x500, i);
index = Link.spiRead(0x50A);
feGain = Link.spiRead(0x50B);
extControl = Link.spiRead(0x50C);
spiReg2 = Link.spiRead(0x50D);
digGain = (byte)(spiReg2 & 0x7F);
enableAtten = (byte)(spiReg2 >> 7);
Console.WriteLine(index + ", " + feGain + ", " + extControl + ", " + digGain + ", " + enableAtten);
}
Link.spiWrite(0x516, 0x08); //Enable Rx1 gain table for readback
Link.Disconnect();
}
public static void MykonosInitStatusCheck()
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.setSpiChannel(TestSetup.MykonosSpi);
Console.WriteLine("SPIRead x119: " + Link.spiRead(0x119).ToString("X"));
Console.WriteLine("SPIRead x157: " + Link.spiRead(0x157).ToString("X"));
Console.WriteLine("SPIRead x1B3: " + Link.spiRead(0x1B3).ToString("X"));
UInt32 pllStatus = Link.spiRead(0x157);
Assert.AreEqual(0x01, pllStatus & 0x01, "CLK PLL not locked");
UInt32 ensmStatus = Link.spiRead(0x1B3);
Assert.AreEqual(0x05, ensmStatus & 0x7, "Not in Alert state.");
Link.Disconnect();
}
public static void TestMCS()
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
byte mcsStatus = 0;
Link.setSpiChannel(1);
Link.spiWrite(0x120, 0x00);
Link.Mykonos.enableMultichipSync(1, ref mcsStatus);
Link.Ad9528.requestSysref(true);
Link.Ad9528.requestSysref(true);
Link.Ad9528.requestSysref(true);
Link.Ad9528.requestSysref(true);
Link.Mykonos.enableMultichipSync(0, ref mcsStatus);
Link.Disconnect();
}
public static void getPllFrequency([Values(Mykonos.PLLNAME.RX_PLL, Mykonos.PLLNAME.SNIFFER_PLL)] Mykonos.PLLNAME pllName)
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.setSpiChannel(MykonosSpi);
Link.Mykonos.setRfPllFrequency(pllName, 3500000000);
System.Threading.Thread.Sleep(1000);
byte spiData1 = 0x0;
//Check PLL Lock Status
spiData1 = Link.spiRead(0x157); Console.WriteLine("Myk: Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: CLK PLL not locked");
spiData1 = Link.spiRead(0x257); Console.WriteLine("Myk: Rx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Rx CLK Syn not locked");
spiData1 = Link.spiRead(0x2C7); Console.WriteLine("Myk: Tx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Tx CLK Syn not locked");
spiData1 = Link.spiRead(0x357); Console.WriteLine("Myk: SnRx Clk Syn Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: SnRx CLK Syn not locked");
spiData1 = Link.spiRead(0x17F); Console.WriteLine("Myk: Cal PLL Stat:" + spiData1.ToString("X"));
Assert.AreEqual(0x01, spiData1 & 0x01, "Myk: Cal PLL not locked");
ulong readBack = 0;
Link.Mykonos.getRfPllFrequency(Mykonos.PLLNAME.CLK_PLL, ref readBack);
Console.Write("Test" + settings.rxProfileData.ClkPllFrequency_kHz);
Assert.AreEqual(settings.rxProfileData.ClkPllFrequency_kHz, (readBack / 1000), "CLKPLL Frequency Readback Not as Expected");
Console.WriteLine("Clk Pll Frequency: " + readBack);
Link.Mykonos.getRfPllFrequency(pllName, ref readBack);
Assert.AreEqual(3500000000, readBack, "PLL Frequency Readback Not as Expected");
Link.Disconnect();
}