public static int GeometryControlsOnGUI(int cur_y, AXNodeGraphEditorWindow editor, AXParametricObject po)
{
int gap = ArchimatixUtils.gap;
int lineHgt = ArchimatixUtils.lineHgt;
float x1 = 10;
float x2 = 20;
float winMargin = ArchimatixUtils.indent;
float innerWidth = po.rect.width - 2 * winMargin;
AXParameter p = null;
// Geometry (and other) controllers
if (po.geometryControls != null && po.geometryControls.children != null)
{
for (int i = 0; i < po.geometryControls.children.Count; i++)
{
p = po.geometryControls.children[i] as AXParameter;
if (p.PType != AXParameter.ParameterType.None && p.PType != AXParameter.ParameterType.GeometryControl)
{
continue;
}
// these points are world, not relative to the this GUIWindow
p.inputPoint = new Vector2(po.rect.x, po.rect.y + cur_y + lineHgt / 2);
p.outputPoint = new Vector2(po.rect.x + po.rect.width, po.rect.y + cur_y + lineHgt / 2);
Rect pRect = new Rect(x1, cur_y, innerWidth, lineHgt);
try {
int hgt = ParameterGUI.OnGUI(pRect, editor, p);
cur_y += hgt + gap;
} catch {
}
}
}
if (po.is2D() || po.generator is Grouper)
{
if (GUI.Button(new Rect(x2, cur_y, lineHgt * 1.25f, lineHgt), new GUIContent("+", "Create a new Control Parameter")))
{
Undo.RegisterCompleteObjectUndo(po.model, "New AXParameter");
AXParameter tmpP = po.addParameter(new AXParameter());
foreach (AXParameter pop in po.parameters)
{
if (pop != p)
{
pop.isOpen = false;
}
}
po.model.indexedParameters.Add(tmpP.Guid, tmpP);
po.doneEditing();
tmpP.isOpen = true;
tmpP.isEditing = false;
tmpP.shouldFocus = true;
//po.isEditing = true;
po.model.cleanGraph();
AXNodeGraphEditorWindow.repaintIfOpen();
}
/*
* if (GUI.Button (new Rect(x1+editButtonWid+6, cur_y, editButtonWid,lineHgt), "Done" ))
* po.doneEditing();
* else
* if (GUI.Button (new Rect(x1+editButtonWid+6, cur_y, editButtonWid,lineHgt), "Edit Controls" ))
* po.isEditing = true;
*/
cur_y += lineHgt + gap + 5;
}
if (po.generator is MaterialTool)
{
MaterialTool materialTool = (po.generator as MaterialTool);
GUIStyle labelstyle = GUI.skin.GetStyle("Label");
labelstyle.alignment = TextAnchor.MiddleLeft;
GUI.Label(new Rect(10, cur_y, 250, 32), " Texels/Unit: " + materialTool.texelsPerUnit.ToString("F0"));
cur_y += 32;
}
else if (po.generator is ShapeOffsetter)
{
ShapeOffsetter offsetter = (po.generator as ShapeOffsetter);
AXParameter output_p = offsetter.P_Output;
if (output_p == null)
{
output_p = po.getParameter("Output Shape");
}
if (output_p == null)
{
return(cur_y);
}
Rect tRect = new Rect(25, cur_y, 150, 16);
GUIStyle labelstyle = GUI.skin.GetStyle("Label");
labelstyle.alignment = TextAnchor.MiddleLeft;
/*
* if (p.PType == AXParameter.ParameterType.Output)
* {
* labelstyle.alignment = TextAnchor.MiddleRight;
* labelstyle.fixedWidth = lRect.width+5;
* }
*/
// JOIN_TYPE: Square, Round, Miter
if (offsetter.offset != 0)
{
string[] options = ArchimatixUtils.getMenuOptions("JoinType");
EditorGUIUtility.labelWidth = 75; //-50;
EditorGUI.BeginChangeCheck();
output_p.joinType = (JoinType)EditorGUI.Popup(tRect, "JoinType", (int)output_p.joinType, options);
if (EditorGUI.EndChangeCheck())
{
Undo.RegisterCompleteObjectUndo(po.model, "value change for JoinType");
po.model.autobuild();
}
cur_y += ArchimatixUtils.lineHgt + ArchimatixUtils.gap;
}
// ARC_TOLERANCE (for JoinType.Round)
if (output_p.joinType == AXClipperLib.JoinType.jtRound || output_p.endType == AXClipperLib.EndType.etOpenRound)
{
tRect.y = cur_y;
if (float.IsNaN(output_p.arcTolerance))
{
output_p.arcTolerance = 50;
}
if (output_p.arcTolerance < .25f)
{
output_p.arcTolerance = .25f;
}
float smooth = (float)(120 / (output_p.arcTolerance * output_p.arcTolerance));
AXEditorUtilities.assertFloatFieldKeyCodeValidity("shapehandler_Text_smoothness_" + output_p.Guid + "_" + output_p.Name);
EditorGUI.BeginChangeCheck();
GUI.SetNextControlName("shapehandler" + output_p.Name);
smooth = EditorGUI.FloatField(tRect, "smoothness", smooth);
if (EditorGUI.EndChangeCheck())
{
output_p.arcTolerance = (float)(Mathf.Sqrt(120 / smooth));
Undo.RegisterCompleteObjectUndo(po.model, "value change for " + output_p.Name);
if (output_p.arcTolerance < .25f)
{
output_p.arcTolerance = .25f;
}
if (output_p.arcTolerance > 50)
{
output_p.arcTolerance = 50;
}
if (float.IsNaN(output_p.arcTolerance))
{
output_p.arcTolerance = 50;
}
po.model.isAltered(20);
}
cur_y += ArchimatixUtils.lineHgt + ArchimatixUtils.gap;
}
}
return(cur_y);
}
public static void display(float imagesize = 64, AXNodeGraphEditorWindow editor = null)
{
//Debug.Log("imagesise="+imagesize);
// called from an OnGUI
//imagesize = 64;
scrollPosition = EditorGUILayout.BeginScrollView(scrollPosition, GUIStyle.none, GUIStyle.none);
EditorGUILayout.BeginVertical();
string[] itemStrings = null;
// Select menu item list
if (editor.OutputParameterBeingDragged == null)
{
if (editor.model != null && editor.model.selectedPOs.Count > 1)
{
//if (editor.model.selectedPOs[0].is2D())
// itemStrings = ArchimatixEngine.nodeStringsFrom2DMultiSelect;
//else
itemStrings = ArchimatixEngine.nodeStringsFromMultiSelect;
}
else
{
itemStrings = ArchimatixEngine.nodeStrings;
}
}
else if (editor.OutputParameterBeingDragged.parametricObject.is2D())
{
itemStrings = ArchimatixEngine.nodeStringsFrom2DOutput;
}
else if (editor.OutputParameterBeingDragged.parametricObject.is3D())
{
if (editor.OutputParameterBeingDragged.Type == AXParameter.DataType.Spline)
{
itemStrings = ArchimatixEngine.nodeStringsFrom2DOutput;
}
else
{
itemStrings = ArchimatixEngine.nodeStringsFrom3DOutput;
}
}
else if (editor.OutputParameterBeingDragged.parametricObject.generator is RepeaterTool)
{
itemStrings = ArchimatixEngine.nodeStringsFromRepeaterTool;
}
/*
* if (Library.last2DItem != null)
* {
* if (GUILayout.Button(new GUIContent(Library.last2DItem.icon, Library.last2DItem.po.Name), new GUILayoutOption[] {GUILayout.Width(imagesize), GUILayout.Height(imagesize)}))
* {
*
* }
* }
*/
List <string> stringList = null;
if (itemStrings != null)
{
stringList = itemStrings.ToList();
}
if (stringList != null)
{
stringList.AddRange(Archimatix.customNodeNames);
}
// Build Menu
string poName;
if (stringList != null)
{
for (int i = 0; i < stringList.Count; i++)
{
string nodeName = stringList[i];
Texture2D nodeIcon = null;
if (ArchimatixEngine.nodeIcons.ContainsKey(nodeName))
{
nodeIcon = ArchimatixEngine.nodeIcons[nodeName];
}
else
{
if (ArchimatixEngine.nodeIcons.ContainsKey("CustomNode"))
{
nodeIcon = ArchimatixEngine.nodeIcons["CustomNode"];
}
else
{
continue;
}
}
if (nodeIcon != null)
{
if (GUILayout.Button(new GUIContent(nodeIcon, nodeName), new GUILayoutOption[] { GUILayout.Width(imagesize), GUILayout.Height(imagesize) }))
{
//if (editor.DraggingOutputParameter != null)
//{
AXModel model = AXEditorUtilities.getOrMakeSelectedModel();
Undo.RegisterCompleteObjectUndo(model, "Node Menu Selection");
AXParametricObject mostRecentPO = model.recentlySelectedPO;
int index = nodeName.IndexOf("_");
poName = (index > 0) ? nodeName.Substring(0, index) : nodeName;
// Support multi-select operation
List <AXParametricObject> selectedPOs = new List <AXParametricObject>();
if (model.selectedPOs.Count > 0)
{
selectedPOs.AddRange(model.selectedPOs);
}
// ADD NEW PO TO MODEL (only this new po is selected after this)
AXParametricObject po = AXEditorUtilities.addNodeToCurrentModel(poName, false);
if (po == null || po.generator == null)
{
return;
}
float max_x = -AXGeometryTools.Utilities.IntPointPrecision;
if (poName == "FreeCurve")
{
ArchimatixEngine.sceneViewState = ArchimatixEngine.SceneViewState.AddPoint;
}
// DRAGGING A PARAMETER? THEN RIG'R UP!
if (editor.OutputParameterBeingDragged != null)
{
AXParametricObject draggingPO = editor.OutputParameterBeingDragged.parametricObject;
AXParameter new_input_p = null;
switch (nodeName)
{
case "Instance2D":
case "ShapeOffsetter":
po.getParameter("Input Shape").makeDependentOn(editor.OutputParameterBeingDragged);
po.intValue("Axis", editor.OutputParameterBeingDragged.parametricObject.intValue("Axis"));
if (po.geometryControls != null)
{
po.geometryControls.isOpen = true;
}
break;
case "ShapeDistributor":
List <AXParameter> deps = new List <AXParameter>();
for (int dd = 0; dd < editor.OutputParameterBeingDragged.Dependents.Count; dd++)
{
deps.Add(editor.OutputParameterBeingDragged.Dependents[dd]);
}
for (int dd = 0; dd < deps.Count; dd++)
{
deps[dd].makeDependentOn(po.getParameter("Output Shape"));
}
po.getParameter("Input Shape").makeDependentOn(editor.OutputParameterBeingDragged);
po.intValue("Axis", editor.OutputParameterBeingDragged.parametricObject.intValue("Axis"));
if (po.geometryControls != null)
{
po.geometryControls.isOpen = true;
}
break;
case "ShapeMerger":
po.generator.getInputShape().addInput().makeDependentOn(editor.OutputParameterBeingDragged);
if (editor.OutputParameterBeingDragged.axis != Axis.NONE)
{
po.intValue("Axis", (int)editor.OutputParameterBeingDragged.axis);
}
else
{
po.intValue("Axis", editor.OutputParameterBeingDragged.parametricObject.intValue("Axis"));
}
break;
case "PlanRepeater2D":
case "PlanRepeater2D_Corner":
po.getParameter("Corner Shape").makeDependentOn(editor.OutputParameterBeingDragged);
po.intValue("Axis", editor.OutputParameterBeingDragged.parametricObject.intValue("Axis"));
break;
case "PlanRepeater_Corner":
po.getParameter("Corner Mesh").makeDependentOn(editor.OutputParameterBeingDragged);
break;
case "PairRepeater2D":
case "RadialRepeater2D":
case "RadialRepeater2D_Node":
case "LinearRepeater2D":
case "LinearRepeater2D_Node":
case "GridRepeater2D":
case "GridRepeater2D_Node":
po.getParameter("Node Shape").makeDependentOn(editor.OutputParameterBeingDragged);
po.intValue("Axis", editor.OutputParameterBeingDragged.parametricObject.intValue("Axis"));
break;
case "RadialRepeater2D_Cell":
case "LinearRepeater2D_Cell":
case "GridRepeater2D_Cell":
po.getParameter("Cell Shape").makeDependentOn(editor.OutputParameterBeingDragged);
po.intValue("Axis", editor.OutputParameterBeingDragged.parametricObject.intValue("Axis"));
break;
case "Grouper":
//po.addInputMesh().makeDependentOn(editor.OutputParameterBeingDragged);
po.addGroupee(editor.OutputParameterBeingDragged.parametricObject);
break;
case "PlanRepeater2D_Plan":
case "Polygon_Plan":
case "Extrude_Plan":
case "PlanSweep_Plan":
case "PlanRepeater_Plan":
case "PlanDeformer_Plan":
// SYNC AXES
if (editor.OutputParameterBeingDragged.axis != Axis.NONE)
{
po.intValue("Axis", (int)editor.OutputParameterBeingDragged.axis);
}
else
{
po.intValue("Axis", editor.OutputParameterBeingDragged.parametricObject.intValue("Axis"));
}
if (nodeName == "Extrude_Plan" && po.intValue("Axis") != (int)Axis.Y)
{
po.floatValue("Bevel", 0);
}
// INSERT SHAPE_DISTRIBUTOR?
new_input_p = po.getParameter("Plan", "Input Shape");
//if (draggingPO.is2D() && !(draggingPO.generator is ShapeDistributor) && editor.OutputParameterBeingDragged.Dependents != null && editor.OutputParameterBeingDragged.Dependents.Count > 0)
// model.insertShapeDistributor(editor.OutputParameterBeingDragged, new_input_p);
//else
new_input_p.makeDependentOn(editor.OutputParameterBeingDragged);
// the output of the new node should match the shapestate of the input
if (po.generator.P_Output != null)
{
po.generator.P_Output.shapeState = new_input_p.shapeState;
}
AXNodeGraphEditorWindow.repaintIfOpen();
break;
case "Lathe_Section":
case "PlanSweep_Section":
case "PlanRepeater_Section":
//po.getParameter("Section").makeDependentOn(editor.OutputParameterBeingDragged);
// INSERT SHAPE_DISTRIBUTOR?
new_input_p = po.getParameter("Section");
if (draggingPO.is2D() && !(draggingPO.generator is ShapeDistributor) && draggingPO.hasDependents())
{
model.insertShapeDistributor(editor.OutputParameterBeingDragged, new_input_p);
}
else
{
new_input_p.makeDependentOn(editor.OutputParameterBeingDragged);
}
// the output of the new node should match the shapestate of the input
//if (po.generator.P_Output != null)
//Debug.Log(new_input_p.Name+" "+new_input_p.shapeState + " :=: " +editor.OutputParameterBeingDragged.Name + " " + editor.OutputParameterBeingDragged.shapeState);
AXNodeGraphEditorWindow.repaintIfOpen();
break;
case "NoiseDeformer":
case "ShearDeformer":
case "TwistDeformer":
case "DomicalDeformer":
case "TaperDeformer":
case "InflateDeformer":
case "PlanDeformer":
po.getParameter("Input Mesh").makeDependentOn(editor.OutputParameterBeingDragged);
break;
//case "PlanDeformer_Plan":
case "PairRepeater":
case "StepRepeater":
case "RadialStepRepeater":
po.getParameter("Node Mesh").makeDependentOn(editor.OutputParameterBeingDragged);
break;
case "LinearRepeater_Node":
AXParameter nodeMesh_p = po.getParameter("Node Mesh");
nodeMesh_p.makeDependentOn(editor.OutputParameterBeingDragged);
// if the src is very long in x, assume you want to repeat in Z
if (editor.OutputParameterBeingDragged.parametricObject.bounds.size.x > (6 * editor.OutputParameterBeingDragged.parametricObject.bounds.size.z))
{
po.initiateRipple_setBoolParameterValueByName("zAxis", true);
}
break;
case "LinearRepeater_Cell":
case "PlanRepeater_Cell":
po.getParameter("Cell Mesh").makeDependentOn(editor.OutputParameterBeingDragged);
break;
case "LinearRepeater_Span":
po.getParameter("Bay SpanU").makeDependentOn(editor.OutputParameterBeingDragged);
break;
case "LinearRepeater":
po.getParameter("RepeaterU").makeDependentOn(editor.OutputParameterBeingDragged);
break;
case "FloorRepeater":
po.getParameter("Floor Mesh").makeDependentOn(editor.OutputParameterBeingDragged);
break;
case "RadialRepeater":
case "RadialRepeater_Node":
case "GridRepeater_Node":
case "PlanRepeater_Node":
po.getParameter("Node Mesh").makeDependentOn(editor.OutputParameterBeingDragged);
break;
case "RadialRepeater_Span":
case "GridRepeater_Span":
po.getParameter("Bay SpanU", "SpanU Mesh").makeDependentOn(editor.OutputParameterBeingDragged);
break;
case "GridRepeater_Cell":
po.getParameter("Cell Mesh").makeDependentOn(editor.OutputParameterBeingDragged);
break;
case "ShapeRepeater_Plan":
AXEditorUtilities.addNodeToCurrentModel("ShapeRepeater").getParameter("Plan").makeDependentOn(editor.OutputParameterBeingDragged);
break;
default:
AXEditorUtilities.addNodeToCurrentModel(nodeName);
break;
}
if (editor.OutputParameterBeingDragged.parametricObject != null)
{
mostRecentPO = editor.OutputParameterBeingDragged.parametricObject;
//po.rect = editor.OutputParameterBeingDragged.parametricObject.rect;
//po.rect.x += 325;
}
/*
* else
* {
* po.rect.x = (model.focusPointInGraphEditor.x)+100;// + UnityEngine.Random.Range(-100, 300);
* po.rect.y = (model.focusPointInGraphEditor.y - 250) + UnityEngine.Random.Range(-10, 0);
* }
*/
}
// NO DRAGGING - CONNECT ALL MULTI_SELECTED
else if (selectedPOs != null && selectedPOs.Count > 0)
{
switch (nodeName)
{
case "ShapeMerger":
AXShape shp = po.generator.getInputShape();
for (int j = 0; j < selectedPOs.Count; j++)
{
AXParametricObject poo = selectedPOs [j];
if (j == 0)
{
po.intValue("Axis", selectedPOs [j].intValue("Axis"));
}
max_x = Mathf.Max(max_x, poo.rect.x);
if (poo.is2D())
{
AXParameter out_p = poo.generator.getPreferredOutputParameter();
if (out_p != null)
{
shp.addInput().makeDependentOn(out_p);
}
}
}
po.rect.x = max_x + 250;
break;
case "Grouper":
//Debug.Log("selectedPOs="+selectedPOs.Count);
//if (model.currentWorkingGroupPO != null && ! selectedPOs.Contains(model.currentWorkingGroupPO))
//{
po.addGroupees(selectedPOs);
Rect r = AXUtilities.getBoundaryRectFromPOs(selectedPOs);
po.rect.x = r.center.x - po.rect.width / 2;
po.rect.y = r.center.y - po.rect.height / 2;
//}
//po.rect.x = max_x+250;
break;
case "Channeler":
//Debug.Log("selectedPOs="+selectedPOs.Count);
//if (model.currentWorkingGroupPO != null && ! selectedPOs.Contains(model.currentWorkingGroupPO))
//{
foreach (AXParametricObject selpo in selectedPOs)
{
AXParameter inputer = po.addInputMesh();
inputer.makeDependentOn(selpo.generator.P_Output);
}
Rect cr = AXUtilities.getBoundaryRectFromPOs(selectedPOs);
po.rect.x = cr.center.x - po.rect.width / 2;
po.rect.y = cr.center.y - po.rect.height / 2;
//}
//po.rect.x = max_x+250;
break;
}
}
else
{
switch (nodeName)
{
case "ShapeMerger":
po.assertInputControls();
//po.generator.getInputShape().addInput();
break;
}
}
editor.OutputParameterBeingDragged = null;
model.autobuild();
po.generator.adjustWorldMatrices();
if (mostRecentPO != null)
{
po.rect = mostRecentPO.rect;
po.rect.x += (mostRecentPO.rect.width + 50);
}
else
{
po.rect.x = (model.focusPointInGraphEditor.x) + 100; // + UnityEngine.Random.Range(-100, 300);
po.rect.y = (model.focusPointInGraphEditor.y - 250) + UnityEngine.Random.Range(-10, 0);
}
po.rect.height = 700;
//AXNodeGraphEditorWindow.zoomToRectIfOpen(po.rect);
//model.beginPanningToRect(po.rect);
}
}
}
}
//GUILayout.Label (GUI.tooltip);
EditorGUILayout.Space();
EditorGUILayout.EndVertical();
EditorGUILayout.EndScrollView();
/* Not sure why I was doing this - it took up a huge amount of CPU!
*
*
* editor.Repaint();
* SceneView sv = SceneView.lastActiveSceneView;
* if (sv != null)
* sv.Repaint();
*
*/
}
// Use this for initialization
public static void OnGUI(AXRelation r)
{
GUIStyle richLabelStyle = new GUIStyle(GUI.skin.label);
richLabelStyle.richText = true;
string labelA = r.pA.Parent.Name + "." + r.pA.Name;
string labelB = r.pB.Parent.Name + "." + r.pB.Name;
GUILayout.Label("<color=" + ((EditorGUIUtility.isProSkin) ? "#bbbbff" : "#660022") + "> <size=13>Relation Expressions</size></color>", richLabelStyle);
GUILayout.Space(5);
// SLIDING A SETS B
EditorGUILayout.BeginHorizontal();
// B = f(A)
GUILayout.Label(labelB + "=", GUILayout.Width(150));
// swap the internal variable name to let the user always use current name,
// even if that name has changed since the last time the expresion was edited.
if (r.expression_AB != null)
{
// if (
// Debug.Log();
GUI.SetNextControlName("expression_Text_AB_" + r.pA_guid + "_" + r.pB_guid);
r.expression_AB = GUILayout.TextField(r.expression_AB.Replace(r.pA.guidAsEpressionKey, labelA));
r.expression_AB = r.expression_AB.Replace(labelA, r.pA.guidAsEpressionKey);
}
EditorGUILayout.EndHorizontal();
// SLIDING B SETS A
EditorGUILayout.BeginHorizontal();
// A = f(B)
GUILayout.Label(labelA + "=", GUILayout.Width(150));
// swap the internal variable name to let the user always use current name,
// even if that name has changed since the last time the expresion was edited.
string tmp_expression_BA = "";
if (r.expression_BA != null)
{
GUI.SetNextControlName("expressionBA_Text_BA_" + r.pA_guid + "_" + r.pB_guid);
tmp_expression_BA = GUILayout.TextField(r.expression_BA.Replace(r.pB.guidAsEpressionKey, labelB));
r.expression_BA = tmp_expression_BA.Replace(labelB, r.pB.guidAsEpressionKey);
}
EditorGUILayout.EndHorizontal();
GUILayout.Space(10);
// FOOTER MENU
AXModel model = r.pA.parametricObject.model;
// HORIZONTALMENU
EditorGUILayout.BeginHorizontal();
if (GUILayout.Button("Revert"))
{
r.revert();
AXNodeGraphEditorWindow.repaintIfOpen();
}
if (GUILayout.Button("Save"))
{
model.selectedRelationInGraph = null;
//relationEditWindowIsDisplayed = false;
}
if (GUILayout.Button("Delete"))
{
//Debug.Log("model "+ model);
model.unrelate(r);
model.selectedRelation = null;
model.selectedRelationInGraph = null;
}
if (GUILayout.Button("Cancel"))
{
r.revert();
model.selectedRelationInGraph = null;
model.selectedRelation = null;
}
EditorGUILayout.EndHorizontal();
// labelStyle.alignment = textAlignment;
// labelStyle.fixedWidth = fixedWidth;
}