/// <summary> Fires the <c>OnHubDisconnected</c> event. </summary>
/// <param name="Hub"> The WeDo Hub that just disconnected. </param>
/// <param name="Reason"> The disconnection reason code. </param>
protected virtual void DoHubDisconnected(wclWeDoHub Hub, Int32 Reason)
{
if (OnHubDisconnected != null)
{
OnHubDisconnected(this, Hub, Reason);
}
}
private void WatcherHubFound(Object Sender, Int64 Address, String Name)
{
// First, check that we are not connected to the HUB.
if (!FHubs.ContainsKey(Address))
{
// Query application about interest of this HUB.
Boolean Connect;
DoHubFound(Address, Name, out Connect);
if (Connect)
{
// Prepare HUB object.
wclWeDoHub Hub = new wclWeDoHub();
// Setup HUB events.
Hub.OnConnected += HubConnected;
Hub.OnDisconnected += HubDisconnected;
// Try to connect to the given HUB.
if (Hub.Connect(FRadio, Address) == wclErrors.WCL_E_SUCCESS)
{
// If operation started with success add HUB to the list to prevent
// From adding it one more time.
FHubs.Add(Address, Hub);
}
}
}
}
/// <summary> Fires the <c>OnHubConnected</c> event. </summary>
/// <param name="Hub"> The WeDo HUB object that has been connected. </param>
/// <param name="Error"> The connection result code. If connection completed with success the
/// value is<c>WCL_E_SUCCESS</c>. </param>
/// <seealso cref="wclWeDoHub"/>
protected virtual void DoHubConnected(wclWeDoHub Hub, Int32 Error)
{
if (OnHubConnected != null)
{
OnHubConnected(this, Hub, Error);
}
}
/// <summary> Creates new Battery Level service client. </summary>
/// <param name="Client"> The <see cref="wclGattClient"/> object that handles the connection
/// to a WeDo device. </param>
/// <param name="Hub"> The <see cref="wclWeDoHub"/> object that owns the service. </param>
/// <exception cref="wclEInvalidArgument"> The exception raises if the <c>Client</c> or <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoBatteryLevelService(wclGattClient Client, wclWeDoHub Hub)
: base(Client, Hub)
{
Uninitialize();
OnBatteryLevelChanged = null;
}
/// <summary> Creates new voltage sensor device object. </summary>
/// <param name="Hub"> The Hub object that owns the device. If this parameter is <c>null</c>
/// the <seealso cref="wclEInvalidArgument"/> exception raises. </param>
/// <param name="ConnectionId"> The device's Connection ID. </param>
/// <seealso cref="wclWeDoHub"/>
/// <exception cref="wclEInvalidArgument"> The exception raises when the <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoVoltageSensor(wclWeDoHub Hub, Byte ConnectionId)
: base(Hub, ConnectionId)
{
DefaultInputFormat = new wclWeDoInputFormat(ConnectionId, wclWeDoIoDeviceType.iodVoltageSensor, 0, 30,
wclWeDoSensorDataUnit.suSi, true, 0, 1);
OnVoltageChanged = null;
}
/// <summary> Creates new IO service client. </summary>
/// <param name="Client"> The <see cref="wclGattClient"/> object that handles the connection
/// to a WeDo device. </param>
/// <param name="Hub"> The <see cref="wclWeDoHub"/> object that owns the service. </param>
/// <exception cref="wclEInvalidArgument"> The exception raises if the <c>Client</c> or <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoIoService(wclGattClient Client, wclWeDoHub Hub)
: base(Client, Hub)
{
// Create input formats lists first.
FInputFormats = new Dictionary <Byte, wclWeDoInputFormat>();
FMissingInputFormats = new Dictionary <Byte, Boolean>();
Uninitialize();
}
private void HubConnected(Object Sender, Int32 Error)
{
wclWeDoHub Hub = (wclWeDoHub)Sender;
DoHubConnected(Hub, Error);
if (Error != wclErrors.WCL_E_SUCCESS)
{
FHubs.Remove(Hub.Address);
}
}
private void HubDisconnected(Object Sender, Int32 Reason)
{
wclWeDoHub Hub = (wclWeDoHub)Sender;
if (FHubs.ContainsKey(Hub.Address))
{
FHubs.Remove(Hub.Address);
DoHubDisconnected(Hub, Reason);
}
}
/// <summary> Creates new color sensor device object. </summary>
/// <param name="Hub"> The Hub object that owns the device. If this parameter is <c>null</c>
/// the <seealso cref="wclEInvalidArgument"/> exception raises. </param>
/// <param name="ConnectionId"> The device's Connection ID. </param>
/// <seealso cref="wclWeDoHub"/>
/// <exception cref="wclEInvalidArgument"> The exception raises when the <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoColorSensor(wclWeDoHub Hub, Byte ConnectionId)
: base(Hub, ConnectionId)
{
AddValidDataFormat(new wclWeDoDataFormat(1, 1, 0, wclWeDoSensorDataUnit.suRaw));
DefaultInputFormat = new wclWeDoInputFormat(ConnectionId, wclWeDoIoDeviceType.iodColorSensor,
0, 1, wclWeDoSensorDataUnit.suRaw, true, 0, 1);
OnColorDetected = null;
}
/// <summary> Creates new IO service client. </summary>
/// <param name="Client"> The <see cref="wclGattClient"/> object that handles the connection
/// to a WeDo device. </param>
/// <param name="Hub"> The <see cref="wclWeDoHub"/> object that owns the service. </param>
/// <exception cref="wclEInvalidArgument"> The exception raises if the <c>Client</c> or <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoHubService(wclGattClient Client, wclWeDoHub Hub)
: base(Client, Hub)
{
OnButtonStateChanged = null;
OnLowVoltageAlert = null;
OnDeviceAttached = null;
OnDeviceDetached = null;
OnHighCurrentAlert = null;
OnLowSignalAlert = null;
Uninitialize();
}
/// <summary> Creates new WeDo Service Client object. </summary>
/// <param name="Client"> The <see cref="wclGattClient"/> object that handles the connection
/// to a WeDo device. </param>
/// <param name="Hub"> The <see cref="wclWeDoHub"/> object that owns the service. </param>
/// <exception cref="wclEInvalidArgument"> The exception raises if the <c>Client</c> or <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoService(wclGattClient Client, wclWeDoHub Hub)
{
if (Client == null || Hub == null)
{
throw new wclEInvalidArgument("Client parameter can not be null.");
}
FCharacteristics = null;
FClient = Client;
FConnected = false;
FHub = Hub;
FServices = null;
}
/// <summary> Gets the IO device connected to the specified port. </summary>
/// <param name="Hub"> The WeDo Hub object. </param>
/// <param name="Port"> The port ID. </param>
/// <returns> The IO device or null. </returns>
/// <seealso cref="wclWeDoHub"/>
/// <seealso cref="wclWeDoIo"/>
public wclWeDoIo GetIoDevice(wclWeDoHub Hub, Byte Port)
{
if (Hub != null)
{
foreach (wclWeDoIo Io in Hub.IoDevices)
{
if (Io.PortId == Port)
{
return(Io);
}
}
}
return(null);
}
private wclWeDoIo GetDevice(wclWeDoHub Hub, wclWeDoIoDeviceType IoType)
{
if (Hub != null)
{
foreach (wclWeDoIo Io in Hub.IoDevices)
{
if (Io.DeviceType == IoType)
{
return(Io);
}
}
}
return(null);
}
/// <summary> Gets the Tilt sensor object for the given Hub. </summary>
/// <param name="Hub"> The WeDo Hub object. </param>
/// <returns> The WeDo Tilt sensor object or null if not found. </returns>
/// <seealso cref="wclWeDoTiltSensor"/>
/// <seealso cref="wclWeDoHub"/>
public List <wclWeDoTiltSensor> GetTiltSensors(wclWeDoHub Hub)
{
List <wclWeDoTiltSensor> Sensors = new List <wclWeDoTiltSensor>();
if (Hub != null)
{
foreach (wclWeDoIo Io in Hub.IoDevices)
{
if (Io.DeviceType == wclWeDoIoDeviceType.iodTiltSensor)
{
Sensors.Add(Io as wclWeDoTiltSensor);
}
}
}
return(Sensors);
}
/// <summary> Gets the list of connected Motor devices. </summary>
/// <param name="Hub"> The WeDo Hub object. </param>
/// <returns> Te list of connected motors. </returns>
/// <seealso cref="wclWeDoMotor"/>
/// <seealso cref="wclWeDoHub"/>
public List <wclWeDoMotor> GetMotors(wclWeDoHub Hub)
{
List <wclWeDoMotor> Motors = new List <wclWeDoMotor>();
if (Hub != null)
{
foreach (wclWeDoIo Io in Hub.IoDevices)
{
if (Io.DeviceType == wclWeDoIoDeviceType.iodMotor)
{
Motors.Add(Io as wclWeDoMotor);
}
}
}
return(Motors);
}
/// <summary> Gets the IO device by its type. </summary>
/// <param name="Hub"> The WeDo Hub object. </param>
/// <param name="IoType"> The device type. </param>
/// <returns> The IO device or null. </returns>
/// <seealso cref="wclWeDoHub"/>
/// <seealso cref="wclWeDoIo"/>
/// <seealso cref="wclWeDoIoDeviceType"/>
public List <wclWeDoIo> GetIoDevices(wclWeDoHub Hub, wclWeDoIoDeviceType IoType)
{
if (Hub == null)
{
return(null);
}
List <wclWeDoIo> Devices = new List <wclWeDoIo>();
foreach (wclWeDoIo Io in Hub.IoDevices)
{
if (Io.DeviceType == IoType)
{
Devices.Add(Io);
}
}
return(Devices);
}
/// <summary> Creates new RGB light device object. </summary>
/// <param name="Hub"> The Hub object that owns the device. If this parameter is <c>null</c>
/// the <seealso cref="wclEInvalidArgument"/> exception raises. </param>
/// <param name="ConnectionId"> The device's Connection ID. </param>
/// <seealso cref="wclWeDoHub"/>
/// <exception cref="wclEInvalidArgument"> The exception raises when the <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoRgbLight(wclWeDoHub Hub, Byte ConnectionId)
: base(Hub, ConnectionId)
{
AddValidDataFormat(new wclWeDoDataFormat(1, 1, (Byte)wclWeDoRgbLightMode.lmDiscrete, wclWeDoSensorDataUnit.suRaw));
AddValidDataFormat(new wclWeDoDataFormat(1, 1, (Byte)wclWeDoRgbLightMode.lmDiscrete, wclWeDoSensorDataUnit.suPercentage));
AddValidDataFormat(new wclWeDoDataFormat(1, 4, (Byte)wclWeDoRgbLightMode.lmDiscrete, wclWeDoSensorDataUnit.suSi));
AddValidDataFormat(new wclWeDoDataFormat(3, 1, (Byte)wclWeDoRgbLightMode.lmAbsolute, wclWeDoSensorDataUnit.suRaw));
AddValidDataFormat(new wclWeDoDataFormat(3, 1, (Byte)wclWeDoRgbLightMode.lmAbsolute, wclWeDoSensorDataUnit.suPercentage));
AddValidDataFormat(new wclWeDoDataFormat(3, 4, (Byte)wclWeDoRgbLightMode.lmAbsolute, wclWeDoSensorDataUnit.suSi));
DefaultInputFormat = new wclWeDoInputFormat(ConnectionId, wclWeDoIoDeviceType.iodRgb, (Byte)wclWeDoRgbLightMode.lmDiscrete,
1, wclWeDoSensorDataUnit.suRaw, true, 0, 1);
FColor = DefaultColor;
FColorIndex = DefaultColorIndex;
OnColorChanged = null;
OnModeChanged = null;
}
/// <summary> Creates new motion sensor device object. </summary>
/// <param name="Hub"> The Hub object that owns the device. If this parameter is <c>null</c>
/// the <seealso cref="wclEInvalidArgument"/> exception raises. </param>
/// <param name="ConnectionId"> The device's Connection ID. </param>
/// <seealso cref="wclWeDoHub"/>
/// <exception cref="wclEInvalidArgument"> The exception raises when the <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoMotionSensor(wclWeDoHub Hub, Byte ConnectionId)
: base(Hub, ConnectionId)
{
FCount = 0;
FDistance = 0;
AddValidDataFormat(new wclWeDoDataFormat(1, 1, (Byte)wclWeDoMotionSensorMode.mmDetect, wclWeDoSensorDataUnit.suRaw));
AddValidDataFormat(new wclWeDoDataFormat(1, 1, (Byte)wclWeDoMotionSensorMode.mmDetect, wclWeDoSensorDataUnit.suPercentage));
AddValidDataFormat(new wclWeDoDataFormat(1, 4, (Byte)wclWeDoMotionSensorMode.mmDetect, wclWeDoSensorDataUnit.suSi));
AddValidDataFormat(new wclWeDoDataFormat(1, 4, (Byte)wclWeDoMotionSensorMode.mmCount, wclWeDoSensorDataUnit.suRaw));
AddValidDataFormat(new wclWeDoDataFormat(1, 1, (Byte)wclWeDoMotionSensorMode.mmCount, wclWeDoSensorDataUnit.suPercentage));
AddValidDataFormat(new wclWeDoDataFormat(1, 4, (Byte)wclWeDoMotionSensorMode.mmCount, wclWeDoSensorDataUnit.suSi));
DefaultInputFormat = new wclWeDoInputFormat(ConnectionId, wclWeDoIoDeviceType.iodMotionSensor, 0, 1,
wclWeDoSensorDataUnit.suRaw, true, 0, 4);
OnCountChanged = null;
OnDistanceChanged = null;
OnModeChanged = null;
}
/// <summary> Creates new IO device object. </summary>
/// <param name="Hub"> The Hub object that owns the device. If this parameter is <c>null</c>
/// the <seealso cref="wclEInvalidArgument"/> exception raises. </param>
/// <param name="ConnectionId"> The device's Connection ID. </param>
/// <seealso cref="wclWeDoHub"/>
/// <exception cref="wclEInvalidArgument"> The exception raises when the <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoIo(wclWeDoHub Hub, Byte ConnectionId)
{
if (Hub == null)
{
throw new wclEInvalidArgument("Hub parameter can not be null.");
}
FAttached = true; // It is always attached on creation!
FConnectionId = ConnectionId;
FDataFormats = new List <wclWeDoDataFormat>();
FDefaultInputFormat = null;
FDeviceType = wclWeDoIoDeviceType.iodUnknown;
FFirmwareVersion = new wclWeDoVersion();
FHardwareVersion = new wclWeDoVersion();
FHub = Hub;
FInputFormat = null;
FInternal = true;
FPortId = 0;
FNumbersFromValueData = new List <Byte[]>();
FValidDataFormats = new List <wclWeDoDataFormat>();
FValue = null;
}
/// <summary> Creates new tilt sensor device object. </summary>
/// <param name="Hub"> The Hub object that owns the device. If this parameter is <c>null</c>
/// the <seealso cref="wclEInvalidArgument"/> exception raises. </param>
/// <param name="ConnectionId"> The device's Connection ID. </param>
/// <seealso cref="wclWeDoHub"/>
/// <exception cref="wclEInvalidArgument"> The exception raises when the <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoTiltSensor(wclWeDoHub Hub, Byte ConnectionId)
: base(Hub, ConnectionId)
{
AddValidDataFormat(new wclWeDoDataFormat(2, 1, (Byte)wclWeDoTiltSensorMode.tmAngle, wclWeDoSensorDataUnit.suRaw));
AddValidDataFormat(new wclWeDoDataFormat(2, 1, (Byte)wclWeDoTiltSensorMode.tmAngle, wclWeDoSensorDataUnit.suPercentage));
AddValidDataFormat(new wclWeDoDataFormat(2, 4, (Byte)wclWeDoTiltSensorMode.tmAngle, wclWeDoSensorDataUnit.suSi));
AddValidDataFormat(new wclWeDoDataFormat(1, 1, (Byte)wclWeDoTiltSensorMode.tmTilt, wclWeDoSensorDataUnit.suRaw));
AddValidDataFormat(new wclWeDoDataFormat(1, 1, (Byte)wclWeDoTiltSensorMode.tmTilt, wclWeDoSensorDataUnit.suPercentage));
AddValidDataFormat(new wclWeDoDataFormat(1, 4, (Byte)wclWeDoTiltSensorMode.tmTilt, wclWeDoSensorDataUnit.suSi));
AddValidDataFormat(new wclWeDoDataFormat(3, 1, (Byte)wclWeDoTiltSensorMode.tmCrash, wclWeDoSensorDataUnit.suRaw));
AddValidDataFormat(new wclWeDoDataFormat(3, 1, (Byte)wclWeDoTiltSensorMode.tmCrash, wclWeDoSensorDataUnit.suPercentage));
AddValidDataFormat(new wclWeDoDataFormat(3, 4, (Byte)wclWeDoTiltSensorMode.tmCrash, wclWeDoSensorDataUnit.suSi));
DefaultInputFormat = new wclWeDoInputFormat(ConnectionId, wclWeDoIoDeviceType.iodTiltSensor,
(Byte)wclWeDoTiltSensorMode.tmTilt, 1, wclWeDoSensorDataUnit.suRaw, true, 0, 1);
OnAngleChanged = null;
OnCrashChanged = null;
OnDirectionChanged = null;
OnModeChanged = null;
}
/// <summary> Creates new device object. </summary>
/// <param name="Hub"> The Hub object that owns the device. If this parameter is <c>null</c>
/// the <seealso cref="wclEInvalidArgument"/> exception raises. </param>
/// <param name="ConnectionId"> The device's Connection ID. </param>
/// <seealso cref="wclWeDoHub"/>
/// <exception cref="wclEInvalidArgument"> The exception raises when the <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoResetableSensor(wclWeDoHub Hub, Byte ConnectionId)
: base(Hub, ConnectionId)
{
}
// The method called by HUB when new device found (attached).
internal static wclWeDoIo Attach(wclWeDoHub Hub, Byte[] RawInfo)
{
if (RawInfo == null || RawInfo.Length < 2)
{
return(null);
}
if ((RawInfo[1] == 1 && RawInfo.Length != 12) || (RawInfo[1] == 0 && RawInfo.Length != 2))
{
return(null);
}
if (RawInfo[1] == 0)
{
// Detached???
return(null);
}
wclWeDoIo Io;
Byte ConnectionId = RawInfo[0];
switch (RawInfo[3])
{
case WEDO_DEVICE_MOTOR:
Io = new wclWeDoMotor(Hub, ConnectionId);
Io.FDeviceType = wclWeDoIoDeviceType.iodMotor;
break;
case WEDO_DEVICE_VOLTAGE_SENSOR:
Io = new wclWeDoVoltageSensor(Hub, ConnectionId);
Io.FDeviceType = wclWeDoIoDeviceType.iodVoltageSensor;
break;
case WEDO_DEVICE_CURRENT_SENSOR:
Io = new wclWeDoCurrentSensor(Hub, ConnectionId);
Io.FDeviceType = wclWeDoIoDeviceType.iodCurrentSensor;
break;
case WEDO_DEVICE_PIEZO:
Io = new wclWeDoPiezo(Hub, ConnectionId);
Io.FDeviceType = wclWeDoIoDeviceType.iodPiezo;
break;
case WEDO_DEVICE_RGB:
Io = new wclWeDoRgbLight(Hub, ConnectionId);
Io.FDeviceType = wclWeDoIoDeviceType.iodRgb;
break;
case WEDO_DEVICE_TILT_SENSOR:
Io = new wclWeDoTiltSensor(Hub, ConnectionId);
Io.FDeviceType = wclWeDoIoDeviceType.iodTiltSensor;
break;
case WEDO_DEVICE_MOTION_SENSOR:
Io = new wclWeDoMotionSensor(Hub, ConnectionId);
Io.FDeviceType = wclWeDoIoDeviceType.iodMotionSensor;
break;
case WEDO_DEVICE_COLOR_SENSOR:
Io = new wclWeDoColorSensor(Hub, ConnectionId);
Io.FDeviceType = wclWeDoIoDeviceType.iodColorSensor;
break;
default:
Io = null;
break;
}
if (Io != null)
{
Byte[] Tmp = new Byte[4];
Array.Copy(RawInfo, 8, Tmp, 0, 4);
Io.FFirmwareVersion = wclWeDoVersion.FromByteArray(Tmp);
Array.Copy(RawInfo, 4, Tmp, 0, 4);
Io.FHardwareVersion = wclWeDoVersion.FromByteArray(Tmp);
Io.FPortId = RawInfo[2];
Io.FInternal = (Io.PortId > 50);
}
return(Io);
}
/// <summary> Creates new Device Information service client. </summary>
/// <param name="Client"> The <see cref="wclGattClient"/> object that handles the connection
/// to a WeDo device. </param>
/// <param name="Hub"> The <see cref="wclWeDoHub"/> object that owns the service. </param>
/// <exception cref="wclEInvalidArgument"> The exception raises if the <c>Client</c> or <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoDeviceInformationService(wclGattClient Client, wclWeDoHub Hub)
: base(Client, Hub)
{
Uninitialize();
}
/// <summary> Creates new motor class object. </summary>
/// <param name="Hub"> The Hub object that owns the device. If this parameter is <c>null</c>
/// the <seealso cref="wclEInvalidArgument"/> exception raises. </param>
/// <param name="ConnectionId"> The device's Connection ID. </param>
/// <seealso cref="wclWeDoHub"/>
/// <exception cref="wclEInvalidArgument"> The exception raises when the <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoMotor(wclWeDoHub Hub, Byte ConnectionId)
: base(Hub, ConnectionId)
{
FDirection = wclWeDoMotorDirection.mdBraking;
FPower = 0;
}
/// <summary> Creates new Piezo device object. </summary>
/// <param name="Hub"> The Hub object that owns the device. If this parameter is <c>null</c>
/// the <seealso cref="wclEInvalidArgument"/> exception raises. </param>
/// <param name="ConnectionId"> The device's Connection ID. </param>
/// <seealso cref="wclWeDoHub"/>
/// <exception cref="wclEInvalidArgument"> The exception raises when the <c>Hub</c>
/// parameter is <c>null</c>. </exception>
public wclWeDoPiezo(wclWeDoHub Hub, Byte ConnectionId)
: base(Hub, ConnectionId)
{
}
/// <summary> Gets the voltage sensor object for the given Hub. </summary>
/// <param name="Hub"> The WeDo Hub object. </param>
/// <returns> The WeDo Voltage Sensor object or null if not found. </returns>
/// <seealso cref="wclWeDoVoltageSensor"/>
/// <seealso cref="wclWeDoHub"/>
public wclWeDoVoltageSensor GetVoltageSensor(wclWeDoHub Hub)
{
return(GetDevice(Hub, wclWeDoIoDeviceType.iodVoltageSensor) as wclWeDoVoltageSensor);
}
/// <summary> Gets the current sensor object for the given Hub. </summary>
/// <param name="Hub"> The WeDo Hub object. </param>
/// <returns> The WeDo Current Sensor object or null if not found. </returns>
/// <seealso cref="wclWeDoCurrentSensor"/>
/// <seealso cref="wclWeDoHub"/>
public wclWeDoCurrentSensor GetCurrentSensor(wclWeDoHub Hub)
{
return(GetDevice(Hub, wclWeDoIoDeviceType.iodCurrentSensor) as wclWeDoCurrentSensor);
}
/// <summary> Gets the piezo device object for the given Hub. </summary>
/// <param name="Hub"> The WeDo Hub object. </param>
/// <returns> The WeDo Piezo device object or null if not found. </returns>
/// <seealso cref="wclWeDoPiezo"/>
/// <seealso cref="wclWeDoHub"/>
public wclWeDoPiezo GetPiezoDevice(wclWeDoHub Hub)
{
return(GetDevice(Hub, wclWeDoIoDeviceType.iodPiezo) as wclWeDoPiezo);
}
/// <summary> Gets the RGB device object for the given Hub. </summary>
/// <param name="Hub"> The WeDo Hub object. </param>
/// <returns> The WeDo RGB device object or null if not found. </returns>
/// <seealso cref="wclWeDoRgbLight"/>
/// <seealso cref="wclWeDoHub"/>
public wclWeDoRgbLight GetRgbDevice(wclWeDoHub Hub)
{
return(GetDevice(Hub, wclWeDoIoDeviceType.iodRgb) as wclWeDoRgbLight);
}
