public static void PreserveBoundaryLoops(MeshConstraints cons, DMesh3 mesh)
{
MeshBoundaryLoops loops = new MeshBoundaryLoops(mesh);
foreach (EdgeLoop loop in loops)
{
DCurve3 loopC = MeshUtil.ExtractLoopV(mesh, loop.Vertices);
DCurveProjectionTarget target = new DCurveProjectionTarget(loopC);
ConstrainVtxLoopTo(cons, mesh, loop.Vertices, target);
}
}
public virtual bool Trim()
{
if (Spatial == null)
{
Spatial = new DMeshAABBTree3(new DMesh3(Mesh, false, MeshComponents.None));
Spatial.Build();
}
if (seed_tri == -1)
{
seed_tri = Spatial.FindNearestTriangle(seed_pt);
}
var loop = new MeshFacesFromLoop(Mesh, TrimLine, Spatial, seed_tri);
MeshFaceSelection selection = loop.ToSelection();
selection.LocalOptimize(true, true);
var editor = new MeshEditor(Mesh);
editor.RemoveTriangles(selection, true);
var components = new MeshConnectedComponents(Mesh);
components.FindConnectedT();
if (components.Count > 1)
{
int keep = components.LargestByCount;
for (int i = 0; i < components.Count; ++i)
{
if (i != keep)
{
editor.RemoveTriangles(components[i].Indices, true);
}
}
}
editor.RemoveAllBowtieVertices(true);
var loops = new MeshBoundaryLoops(Mesh);
bool loopsOK = false;
try
{
loopsOK = loops.Compute();
}
catch (Exception)
{
return(false);
}
if (!loopsOK)
{
return(false);
}
// [TODO] to support trimming mesh w/ existing holes, we need to figure out which
// loop we created in RemoveTriangles above!
if (loops.Count > 1)
{
return(false);
}
int[] loopVerts = loops[0].Vertices;
var borderTris = new MeshFaceSelection(Mesh);
borderTris.SelectVertexOneRings(loopVerts);
borderTris.ExpandToOneRingNeighbours(RemeshBorderRings);
var remesh = new RegionRemesher(Mesh, borderTris.ToArray());
remesh.Region.MapVerticesToSubmesh(loopVerts);
double target_len = TargetEdgeLength;
if (target_len <= 0)
{
double mine, maxe, avge;
MeshQueries.EdgeLengthStatsFromEdges(Mesh, loops[0].Edges, out mine, out maxe, out avge);
target_len = avge;
}
var meshTarget = new MeshProjectionTarget(Spatial.Mesh, Spatial);
remesh.SetProjectionTarget(meshTarget);
remesh.SetTargetEdgeLength(target_len);
remesh.SmoothSpeedT = SmoothingAlpha;
var curveTarget = new DCurveProjectionTarget(TrimLine);
var multiTarget = new SequentialProjectionTarget(curveTarget, meshTarget);
int set_id = 3;
MeshConstraintUtil.ConstrainVtxLoopTo(remesh, loopVerts, multiTarget, set_id);
for (int i = 0; i < RemeshRounds; ++i)
{
remesh.BasicRemeshPass();
}
remesh.BackPropropagate();
// [TODO] output loop somehow...use MeshConstraints.FindConstrainedEdgesBySetID(set_id)...
return(true);
} // Trim()
public void Close_Flat()
{
double minlen, maxlen, avglen;
MeshQueries.EdgeLengthStats(Mesh, out minlen, out maxlen, out avglen, 1000);
double target_edge_len = (TargetEdgeLen <= 0) ? avglen : TargetEdgeLen;
// massage around boundary loop
List <int> refinedBorderEdges;
cleanup_boundary(Mesh, InitialBorderLoop, avglen, out refinedBorderEdges, 3);
// find new border loop. try to find new loop containing edges from loop we refined in cleanup_boundary,
// if that fails just use largest loop.
MeshBoundaryLoops loops = new MeshBoundaryLoops(Mesh);
int iloop = loops.FindLoopContainingEdge(refinedBorderEdges[0]);
if (iloop == -1)
{
iloop = loops.MaxVerticesLoopIndex;
}
EdgeLoop fill_loop = loops.Loops[iloop];
int extrude_group = (ExtrudeGroup == -1) ? Mesh.AllocateTriangleGroup() : ExtrudeGroup;
int fill_group = (FillGroup == -1) ? Mesh.AllocateTriangleGroup() : FillGroup;
// decide on projection plane
//AxisAlignedBox3d loopbox = fill_loop.GetBounds();
//Vector3d topPt = loopbox.Center;
//if ( bIsUpper ) {
// topPt.y = loopbox.Max.y + 0.25 * dims.y;
//} else {
// topPt.y = loopbox.Min.y - 0.25 * dims.y;
//}
//Frame3f plane = new Frame3f((Vector3f)topPt);
// extrude loop to this plane
MeshExtrudeLoop extrude = new MeshExtrudeLoop(Mesh, fill_loop);
extrude.PositionF = (v, n, i) => {
return(FlatClosePlane.ProjectToPlane((Vector3f)v, 1));
};
extrude.Extrude(extrude_group);
MeshValidation.IsBoundaryLoop(Mesh, extrude.NewLoop);
Debug.Assert(Mesh.CheckValidity());
// smooth the extrude loop
MeshLoopSmooth loop_smooth = new MeshLoopSmooth(Mesh, extrude.NewLoop);
loop_smooth.ProjectF = (v, i) => {
return(FlatClosePlane.ProjectToPlane((Vector3f)v, 1));
};
loop_smooth.Alpha = 0.5f;
loop_smooth.Rounds = 100;
loop_smooth.Smooth();
Debug.Assert(Mesh.CheckValidity());
// fill result
SimpleHoleFiller filler = new SimpleHoleFiller(Mesh, extrude.NewLoop);
filler.Fill(fill_group);
Debug.Assert(Mesh.CheckValidity());
// make selection for remesh region
MeshFaceSelection remesh_roi = new MeshFaceSelection(Mesh);
remesh_roi.Select(extrude.NewTriangles);
remesh_roi.Select(filler.NewTriangles);
remesh_roi.ExpandToOneRingNeighbours();
remesh_roi.ExpandToOneRingNeighbours();
remesh_roi.LocalOptimize(true, true);
int[] new_roi = remesh_roi.ToArray();
// get rid of extrude group
FaceGroupUtil.SetGroupToGroup(Mesh, extrude_group, 0);
/* clean up via remesh
* - constrain loop we filled to itself
*/
RegionRemesher r = new RegionRemesher(Mesh, new_roi);
DCurve3 top_curve = MeshUtil.ExtractLoopV(Mesh, extrude.NewLoop.Vertices);
DCurveProjectionTarget curve_target = new DCurveProjectionTarget(top_curve);
int[] top_loop = (int[])extrude.NewLoop.Vertices.Clone();
r.Region.MapVerticesToSubmesh(top_loop);
MeshConstraintUtil.ConstrainVtxLoopTo(r.Constraints, r.Mesh, top_loop, curve_target);
DMeshAABBTree3 spatial = new DMeshAABBTree3(Mesh);
spatial.Build();
MeshProjectionTarget target = new MeshProjectionTarget(Mesh, spatial);
r.SetProjectionTarget(target);
bool bRemesh = true;
if (bRemesh)
{
r.Precompute();
r.EnableFlips = r.EnableSplits = r.EnableCollapses = true;
r.MinEdgeLength = target_edge_len;
r.MaxEdgeLength = 2 * target_edge_len;
r.EnableSmoothing = true;
r.SmoothSpeedT = 1.0f;
for (int k = 0; k < 40; ++k)
{
r.BasicRemeshPass();
}
r.SetProjectionTarget(null);
r.SmoothSpeedT = 0.25f;
for (int k = 0; k < 10; ++k)
{
r.BasicRemeshPass();
}
Debug.Assert(Mesh.CheckValidity());
r.BackPropropagate();
}
// smooth around the join region to clean up ugliness
smooth_region(Mesh, r.Region.BaseBorderV, 3);
}
public virtual bool Cut()
{
double invalidDist = double.MinValue;
MeshEdgeSelection CutEdgeSet = null;
MeshVertexSelection CutVertexSet = null;
if (CutFaceSet != null)
{
CutEdgeSet = new MeshEdgeSelection(Mesh, CutFaceSet);
CutVertexSet = new MeshVertexSelection(Mesh, CutEdgeSet);
}
// compute signs
int MaxVID = Mesh.MaxVertexID;
double[] signs = new double[MaxVID];
gParallel.ForEach(Interval1i.Range(MaxVID), (vid) => {
if (Mesh.IsVertex(vid))
{
Vector3d v = Mesh.GetVertex(vid);
signs[vid] = (v - PlaneOrigin).Dot(PlaneNormal);
}
else
{
signs[vid] = invalidDist;
}
});
HashSet <int> ZeroEdges = new HashSet <int>();
HashSet <int> ZeroVertices = new HashSet <int>();
HashSet <int> OnCutEdges = new HashSet <int>();
// have to skip processing of new edges. If edge id
// is > max at start, is new. Otherwise if in NewEdges list, also new.
int MaxEID = Mesh.MaxEdgeID;
HashSet <int> NewEdges = new HashSet <int>();
IEnumerable <int> edgeItr = Interval1i.Range(MaxEID);
if (CutEdgeSet != null)
{
edgeItr = CutEdgeSet;
}
// cut existing edges with plane, using edge split
foreach (int eid in edgeItr)
{
if (Mesh.IsEdge(eid) == false)
{
continue;
}
if (eid >= MaxEID || NewEdges.Contains(eid))
{
continue;
}
Index2i ev = Mesh.GetEdgeV(eid);
double f0 = signs[ev.a];
double f1 = signs[ev.b];
// If both signs are 0, this edge is on-contour
// If one sign is 0, that vertex is on-contour
int n0 = (Math.Abs(f0) < MathUtil.Epsilon) ? 1 : 0;
int n1 = (Math.Abs(f1) < MathUtil.Epsilon) ? 1 : 0;
if (n0 + n1 > 0)
{
if (n0 + n1 == 2)
{
ZeroEdges.Add(eid);
}
else
{
ZeroVertices.Add((n0 == 1) ? ev[0] : ev[1]);
}
continue;
}
// no crossing
if (f0 * f1 > 0)
{
continue;
}
DMesh3.EdgeSplitInfo splitInfo;
MeshResult result = Mesh.SplitEdge(eid, out splitInfo);
if (result != MeshResult.Ok)
{
throw new Exception("MeshPlaneCut.Cut: failed in SplitEdge");
//return false;
}
// SplitEdge just bisects edge - use plane intersection instead
double t = f0 / (f0 - f1);
Vector3d newPos = (1 - t) * Mesh.GetVertex(ev.a) + (t) * Mesh.GetVertex(ev.b);
Mesh.SetVertex(splitInfo.vNew, newPos);
NewEdges.Add(splitInfo.eNewBN);
NewEdges.Add(splitInfo.eNewCN); OnCutEdges.Add(splitInfo.eNewCN);
if (splitInfo.eNewDN != DMesh3.InvalidID)
{
NewEdges.Add(splitInfo.eNewDN);
OnCutEdges.Add(splitInfo.eNewDN);
}
}
// remove one-rings of all positive-side vertices.
IEnumerable <int> vertexSet = Interval1i.Range(MaxVID);
if (CutVertexSet != null)
{
vertexSet = CutVertexSet;
}
foreach (int vid in vertexSet)
{
if (signs[vid] > 0 && Mesh.IsVertex(vid))
{
Mesh.RemoveVertex(vid, true, false);
}
}
// ok now we extract boundary loops, but restricted
// to either the zero-edges we found, or the edges we created! bang!!
Func <int, bool> CutEdgeFilterF = (eid) => {
if (OnCutEdges.Contains(eid) || ZeroEdges.Contains(eid))
{
return(true);
}
return(false);
};
try {
MeshBoundaryLoops loops = new MeshBoundaryLoops(Mesh, false);
loops.EdgeFilterF = CutEdgeFilterF;
loops.Compute();
CutLoops = loops.Loops;
CutSpans = loops.Spans;
CutLoopsFailed = false;
FoundOpenSpans = CutSpans.Count > 0;
} catch {
CutLoops = new List <EdgeLoop>();
CutLoopsFailed = true;
}
return(true);
} // Cut()
public virtual bool Extrude()
{
MeshNormals normals = null;
bool bHaveNormals = Mesh.HasVertexNormals;
if (!bHaveNormals)
{
normals = new MeshNormals(Mesh);
normals.Compute();
}
InitialLoops = new MeshBoundaryLoops(Mesh);
InitialTriangles = Mesh.TriangleIndices().ToArray();
InitialVertices = Mesh.VertexIndices().ToArray();
// duplicate triangles of mesh
InitialToOffsetMapV = new IndexMap(Mesh.MaxVertexID, Mesh.MaxVertexID);
OffsetGroupID = OffsetGroup.GetGroupID(Mesh);
var editor = new MeshEditor(Mesh);
OffsetTriangles = editor.DuplicateTriangles(InitialTriangles, ref InitialToOffsetMapV, OffsetGroupID);
// set vertices to new positions
foreach (int vid in InitialVertices)
{
int newvid = InitialToOffsetMapV[vid];
if (!Mesh.IsVertex(newvid))
{
continue;
}
Vector3d v = Mesh.GetVertex(vid);
Vector3f n = (bHaveNormals) ? Mesh.GetVertexNormal(vid) : (Vector3f)normals.Normals[vid];
Vector3d newv = ExtrudedPositionF(v, n, vid);
Mesh.SetVertex(newvid, newv);
}
// we need to reverse one side
if (IsPositiveOffset)
{
editor.ReverseTriangles(InitialTriangles);
}
else
{
editor.ReverseTriangles(OffsetTriangles);
}
// stitch each loop
NewLoops = new EdgeLoop[InitialLoops.Count];
StitchTriangles = new int[InitialLoops.Count][];
StitchGroupIDs = new int[InitialLoops.Count];
int li = 0;
foreach (var loop in InitialLoops)
{
int[] loop2 = new int[loop.VertexCount];
for (int k = 0; k < loop2.Length; ++k)
{
loop2[k] = InitialToOffsetMapV[loop.Vertices[k]];
}
StitchGroupIDs[li] = StitchGroups.GetGroupID(Mesh);
if (IsPositiveOffset)
{
StitchTriangles[li] = editor.StitchLoop(loop2, loop.Vertices, StitchGroupIDs[li]);
}
else
{
StitchTriangles[li] = editor.StitchLoop(loop.Vertices, loop2, StitchGroupIDs[li]);
}
NewLoops[li] = EdgeLoop.FromVertices(Mesh, loop2);
li++;
}
return(true);
}
