protected void DrawLine(GraphicsWrapper g, Pen linePen, float[] values, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
PointF drawingPoint = new PointF();
int startIndex, endIndex;
GetDrawingRangeIndecesFromClippingRectange(clippingRectangle, drawingPoint, unitsUnification, out startIndex, out endIndex, itemWidth, itemMargin);
for (int i = startIndex + unitsUnification; i < endIndex && i < values.Length + unitsUnification - 1; i += unitsUnification)
{
int actualIndex = i;
int actualPreviousIndex = i - unitsUnification;
if (actualIndex >= values.Length)
{
actualIndex = values.Length - 1;
}
float previousValue = (float)values[actualPreviousIndex];
float value = (float)values[actualIndex];
if (float.IsNaN(previousValue) == false && float.IsNaN(value) == false)
{
g.DrawLine(linePen, drawingPoint.X, drawingPoint.Y + previousValue, drawingPoint.X + itemMargin + itemWidth, drawingPoint.Y + value);
}
drawingPoint.X = i * (itemMargin + itemWidth);
}
}
void DrawStopGain(GraphicsWrapper g, ref PointF updatedImageDrawingPoint, Order order, float itemWidth, float itemMargin,
float yToXScaling, CandleSignal cs, float lastBarX, bool drawOpening)
{
Image image = _imageUp;
Brush brush = Brushes.Green;
Pen dashedPen = _buyDashedPen;
Pen pen = Pens.GreenYellow;
image = _imageStopGain;
//itemWidth += itemMargin;
float imageHeight = 2 * (yToXScaling * itemWidth);
//float imageHeight = (yToXScaling * itemWidth);
//imageHeight =itemWidth;
Brush brushx = Brushes.Yellow;
// Gain tip should occur on the opposite side of arrow
if (cs.Arrow == 1)
{
g.DrawImage(image, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y +
(float)cs.BarData.High + (yToXScaling * itemWidth) + imageHeight, itemWidth, -imageHeight);
updatedImageDrawingPoint.Y += 1.1f * imageHeight;
}
else
{
g.DrawImage(image, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y +
(float)cs.BarData.Low - (yToXScaling * itemWidth), itemWidth, -imageHeight);
updatedImageDrawingPoint.Y -= 1.1f * imageHeight;
}
}
void DrawStopLoss(GraphicsWrapper g, ref PointF updatedImageDrawingPoint, Order order, float itemWidth, float itemMargin,
float yToXScaling, CandleSignal cs, float lastBarX, bool drawOpening)
{
Image image = _imageUp;
Brush brush = Brushes.Green;
Pen dashedPen = _buyDashedPen;
Pen pen = Pens.GreenYellow;
image = _imageStopLoss;
float imageHeight = 2 * (yToXScaling * itemWidth);
if (cs.Arrow == -1)
{
g.DrawImage(image, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y +
(float)cs.BarData.High + (yToXScaling * itemWidth) + imageHeight, itemWidth, -imageHeight);
updatedImageDrawingPoint.Y += 1.1f * imageHeight;
}
else
{
g.DrawImage(image, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y +
(float)cs.BarData.Low - (yToXScaling * itemWidth), itemWidth, -imageHeight);
updatedImageDrawingPoint.Y -= 1.1f * imageHeight;
}
}
protected override void DrawInitialActualSpaceOverlays(GraphicsWrapper g, ChartSeries dateAssignedSeries)
{
base.DrawInitialActualSpaceOverlays(g, dateAssignedSeries);
if (_showMainChartSynchronizationImage && _masterSynchronizationImage != null)
{
g.DrawImageUnscaledAndClipped(_masterSynchronizationImage, new Rectangle(4, (int)LabelsTopMargin, _masterSynchronizationImage.Width, _masterSynchronizationImage.Height));
}
}
public override void Draw(GraphicsWrapper g, PointF?mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace)
{
if (Visible == false)
{
return;
}
if (_controlPoints.Count < 1)
{
return;
}
PointF point1 = _controlPoints[0];
PointF point2;
if (_controlPoints.Count < 2)
{
point2 = mousePosition.Value;
}
else
{
point2 = _controlPoints[1];
}
// Clipping opitmization.
RectangleF rectangle = new RectangleF(
Math.Min(point1.X, point2.X), Math.Min(point1.Y, point2.Y),
Math.Abs(point2.X - point1.X), Math.Abs(point2.Y - point1.Y));
if (rectangle.IntersectsWith(clippingRectangle) == false)
{
return;
}
// Draw base line.
g.DrawLine(_dashedLinePen, point1, point2);
float baseLevel = point1.Y;
float height = point2.Y - point1.Y;
// Draw fibbonacci levels.
float[] levels = new float[] { 0, 23.6f, 38.2f, 50, 61.8f, 100 };
for (int i = 0; i < levels.Length; i++)
{
float actualLevel = baseLevel + height * levels[i] / 100f;
g.DrawLine(_solidLinePen, point1.X, actualLevel, point2.X, actualLevel);
g.DrawString(levels[i].ToString(), DefaultDynamicObjectFont, Brushes.White, point1.X, actualLevel);
}
if (Selected)
{
DrawControlPoints(g);
}
}
public override void Draw(GraphicsWrapper g, PointF? mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace)
{
if (Visible == false)
{
return;
}
if (_controlPoints.Count < 1)
{
return;
}
PointF point1 = _controlPoints[0];
PointF point2;
if (_controlPoints.Count < 2)
{
point2 = mousePosition.Value;
}
else
{
point2 = _controlPoints[1];
}
// Clipping opitmization.
RectangleF rectangle = new RectangleF(
Math.Min(point1.X, point2.X), Math.Min(point1.Y, point2.Y),
Math.Abs(point2.X - point1.X), Math.Abs(point2.Y - point1.Y));
if (rectangle.IntersectsWith(clippingRectangle) == false)
{
return;
}
// Draw base line.
g.DrawLine(_dashedLinePen, point1, point2);
float baseLevel = point1.Y;
float height = point2.Y - point1.Y;
// Draw fibbonacci levels.
float[] levels = new float[] { 0, 23.6f, 38.2f, 50, 61.8f, 100 };
for (int i = 0; i < levels.Length; i++)
{
float actualLevel = baseLevel + height * levels[i] / 100f;
g.DrawLine(_solidLinePen, point1.X, actualLevel, point2.X, actualLevel);
g.DrawString(levels[i].ToString(), DefaultDynamicObjectFont, Brushes.White, point1.X, actualLevel);
}
if (Selected)
{
DrawControlPoints(g);
}
}
public override void Draw(GraphicsWrapper g, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
if (this.Visible == false)
{
return;
}
lock (this)
{
if (_chartType == ChartTypeEnum.Line)
{
for (int i = 0; i < _valueSets.Count; i++)
{
if (_valueSetsPens[i] == null)
{
base.DrawLine(g, _defaultPen, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
else
{
base.DrawLine(g, _valueSetsPens[i], _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
}
}
else if (_chartType == ChartTypeEnum.Histogram)
{
for (int i = 0; i < _valueSets.Count; i++)
{
if (_valueSetsPens[i] == null)
{
base.DrawHistogramBars(g, _defaultPen, _fill, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
else
{
base.DrawHistogramBars(g, _valueSetsPens[i], _fill, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
}
}
else if (_chartType == ChartTypeEnum.ColoredArea)
{
for (int i = 0; i < _valueSets.Count; i++)
{
if (_valueSetsPens[i] == null)
{
base.DrawColoredArea(g, _defaultPen, _fill, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
else
{
base.DrawColoredArea(g, _valueSetsPens[i], _fill, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
}
}
} // Lock
}
public void SynchronizeDrawingSpaceXAxis(GraphicsWrapper masterWrapper)
{
lock (this)
{
// The current transformation matrix.
float[] elements = _drawingSpaceTransform.Elements;
// Modify the matrix only in X direction.
elements[0] = masterWrapper.DrawingSpaceTransform.Elements[0];
elements[4] = masterWrapper.DrawingSpaceTransform.Elements[4];
_drawingSpaceTransform = new Matrix(elements[0], elements[1], elements[2], elements[3], elements[4], elements[5]);
}
}
public override void Draw(GraphicsWrapper g, PointF? mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace)
{
if (Visible == false)
{
return;
}
foreach (double level in _levels)
{
if (level >= drawingSpace.Y && level <= drawingSpace.Y + drawingSpace.Height)
{
g.DrawLine(_pen, drawingSpace.X, (float)level, drawingSpace.X + drawingSpace.Width, (float)level);
}
}
}
public void Draw(GraphicsWrapper g, RectangleF drawingSpaceClipping, CustomObject.DrawingOrderEnum drawingOrder)
{
foreach (CustomObject customObject in _dynamicCustomObjects)
{
if (customObject.DrawingOrder == drawingOrder)
{
customObject.Draw(g, _pane.CurrentDrawingSpaceMousePosition, drawingSpaceClipping, _pane.DrawingSpace);
}
}
if (_currentObjectBuilt != null)
{
_currentObjectBuilt.Draw(g, _pane.CurrentDrawingSpaceMousePosition, drawingSpaceClipping, _pane.DrawingSpace);
}
}
public override void Draw(GraphicsWrapper g, PointF?mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace)
{
if (Visible == false)
{
return;
}
foreach (double level in _levels)
{
if (level >= drawingSpace.Y && level <= drawingSpace.Y + drawingSpace.Height)
{
g.DrawLine(_pen, drawingSpace.X, (float)level, drawingSpace.X + drawingSpace.Width, (float)level);
}
}
}
protected void DrawIcon(GraphicsWrapper g, Pen pen, Brush fill, Rectangle rectangle)
{
if (Visible == false)
{
return;
}
if (fill != null)
{
g.FillRectangle(fill, rectangle);
}
if (pen != null)
{
g.DrawRectangle(pen, rectangle);
}
}
void DrawHistogramBar(GraphicsWrapper g, ref PointF drawingPoint, float[] values, Pen pen, Brush fill,
int index, int previousItemIndex, float itemWidth, float itemMargin)
{
float y = drawingPoint.Y;
double heightSum = 0;
int actualSumCount = 0;
int unificationCount = index - previousItemIndex;
for (int i = previousItemIndex; i <= index; i++)
{
if (float.IsNaN(values[i]) ||
float.IsInfinity(values[i]))
{
continue;
}
heightSum += values[i];
actualSumCount++;
}
if (actualSumCount == 0)
{
return;
}
float height = (float)(heightSum / actualSumCount);
if (height < 0)
{
y += height;
height = -height;
}
if (fill != null)
{
g.FillRectangle(fill, drawingPoint.X, y, (itemWidth) * unificationCount, height);
}
if (pen != null)
{
g.DrawRectangle(pen, drawingPoint.X, y, itemWidth, height);
}
}
/// <summary>
/// Control points selection rectangle is rendered in absolute size, ignoring scaling.
/// </summary>
/// <param name="g"></param>
/// <param name="pen">Pass null to use default control point pen.</param>
protected void DrawControlPoints(GraphicsWrapper g)
{
float xMargin = 0.5f * Math.Abs(_defaultAbsoluteControlPointSelectionRectanglesSize / g.DrawingSpaceTransform.Elements[0]);
float yMargin = 0.5f * Math.Abs(_defaultAbsoluteControlPointSelectionRectanglesSize / g.DrawingSpaceTransform.Elements[3]);
for (int i = 0; i < _controlPoints.Count; i++)
{
PointF point = _controlPoints[i];
if (_selectedControlPoints.Contains(i))
{
g.DrawRectangle(_defaultSelectedControlPointPen, point.X - xMargin, point.Y - yMargin, xMargin * 2, yMargin * 2);
}
else
{
g.DrawRectangle(_defaultControlPointPen, point.X - xMargin, point.Y - yMargin, xMargin * 2, yMargin * 2);
}
}
}
void DrawOrders(GraphicsWrapper g, int index, PointF drawingPoint, float itemWidth, float itemMargin,
List <Order> openingOrders, List <Order> closingOrders, BarData orderBarData, float lastBarX)
{
// Width is same as items in real coordinates.
float actualImageHeight = _imageDown.Height / Math.Abs(g.DrawingSpaceTransform.Elements[3]);
float yToXScaling = Math.Abs(g.DrawingSpaceTransform.Elements[0] / g.DrawingSpaceTransform.Elements[3]);
PointF updatedImageDrawingPoint = drawingPoint;
foreach (Order order in openingOrders)
{
DrawOrder(g, ref updatedImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, orderBarData, lastBarX, true);
}
foreach (Order order in closingOrders)
{
DrawOrder(g, ref updatedImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, orderBarData, lastBarX, false);
}
}
//void DrawSignal(GraphicsWrapper g, ref PointF updatedImageDrawingPoint, Order order, float itemWidth, float itemMargin,
// float yToXScaling, BarData orderBarData, float lastBarX, bool drawOpening)
void DrawSignal(GraphicsWrapper g, ref PointF updatedImageDrawingPoint, Order order, float itemWidth, float itemMargin,
float yToXScaling, CandleSignal cs, float lastBarX, bool drawOpening)
{
Image image = _imageUp;
Brush brush = Brushes.Green;
Pen dashedPen = _buyDashedPen;
Pen pen = Pens.GreenYellow;
if (order.IsBuy == false)
{
image = _imageDown;
brush = Brushes.Red;
pen = Pens.Red;
dashedPen = _sellDashedPen;
}
//if (drawOpening == false)
//{
if (cs.Arrow == -1)
{
image = _imageDown;
}
else
{
image = _imageUp;
}
float imageHeight = 4 * (yToXScaling * itemWidth);
if (cs.Arrow == -1)
{
g.DrawImage(image, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y +
(float)cs.BarData.High + (yToXScaling * itemWidth) + imageHeight, itemWidth, -imageHeight);
updatedImageDrawingPoint.Y += 1.1f * imageHeight;
}
else
{
g.DrawImage(image, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y +
(float)cs.BarData.Low - (yToXScaling * itemWidth), itemWidth, -imageHeight);
updatedImageDrawingPoint.Y -= 1.1f * imageHeight;
}
}
protected void DrawColorAreaItem(GraphicsWrapper g, ref PointF drawingPoint, float[] values, Pen pen, Brush fill,
int index, int previousItemIndex, float itemWidth, float itemMargin)
{
float indexValue = values[index];
float previousItemIndexValue = values[previousItemIndex];
int unificationCount = index - previousItemIndex;
for (int i = previousItemIndex; i <= index; i++)
{
if (float.IsNaN(previousItemIndexValue))
{
previousItemIndexValue = values[i];
}
else if (float.IsNaN(indexValue))
{
indexValue = values[i];
}
}
if (float.IsNaN(indexValue) || float.IsNaN(previousItemIndexValue))
{// Failed to find reasonable values to draw.
return;
}
if (fill != null)
{
g.FillPolygon(fill, new PointF[] {
drawingPoint,
new PointF(drawingPoint.X + (itemMargin + itemWidth) * unificationCount, drawingPoint.Y),
new PointF(drawingPoint.X + (itemMargin + itemWidth) * unificationCount, drawingPoint.Y + indexValue),
new PointF(drawingPoint.X, drawingPoint.Y + previousItemIndexValue)
});
}
if (pen != null)
{
g.DrawLine(pen, drawingPoint.X, drawingPoint.Y + previousItemIndexValue,
drawingPoint.X + (itemMargin + itemWidth) * unificationCount, drawingPoint.Y + indexValue);
}
}
public override void Draw(GraphicsWrapper g, PointF?mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace)
{
if (Visible == false || _controlPoints.Count < 1)
{
return;
}
if (clippingRectangle.Contains(_controlPoints[0]) == false)
{// Clipping opitmization.
return;
}
SizeF size = g.MeasureString(_text, DefaultDynamicObjectFont);
if (size.Height < 0)
{
_rectangle = new RectangleF(_controlPoints[0].X, _controlPoints[0].Y + size.Height, size.Width, -size.Height);
}
else
{
_rectangle = new RectangleF(_controlPoints[0].X, _controlPoints[0].Y, size.Width, size.Height);
}
g.DrawString(_text, DefaultDynamicObjectFont, _brush, _controlPoints[0]);
if (Selected || IsBuilding)
{
g.DrawLine(Pens.Red, _rectangle.Location, new PointF(_rectangle.X + _rectangle.Width, _rectangle.Y));
}
// Rounding rectangle.
//g.DrawRectangle(Pens.White, _rectangle);
if (Selected)
{
DrawControlPoints(g);
}
}
/// <summary>
/// Enter locked.
/// </summary>
void DrawBar(GraphicsWrapper g, ref PointF startingPoint, BarData barData, float itemWidth, float itemMargin, int itemUnitification)
{
float xMiddle = startingPoint.X + itemWidth / 2;
float xHalfWidth = itemWidth / 2;
Pen pen = _risingBarPen;
if (barData.BarIsRising == false)
{
pen = _fallingBarPen;
}
if (pen == null)
{
return;
}
float yDisplacement = startingPoint.Y;
g.DrawLine(pen, xMiddle, yDisplacement + (float)barData.Low, xMiddle, yDisplacement + (float)barData.High);
g.DrawLine(pen, xMiddle, yDisplacement + (float)barData.Open, xMiddle - xHalfWidth, yDisplacement + (float)barData.Open);
g.DrawLine(pen, xMiddle, yDisplacement + (float)barData.Close, xMiddle + xHalfWidth, yDisplacement + (float)barData.Close);
}
protected void DrawHistogramBars(GraphicsWrapper g, Pen pen, Brush fill, float[] values, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
PointF drawingPoint = new PointF();
int startIndex, endIndex;
GetDrawingRangeIndecesFromClippingRectange(clippingRectangle, drawingPoint, unitsUnification, out startIndex, out endIndex, itemWidth, itemMargin);
for (int i = startIndex + unitsUnification; i < endIndex && i < values.Length + unitsUnification - 1; i += unitsUnification)
{
int actualIndex = i;
int actualPreviousIndex = i - unitsUnification;
if (actualIndex >= values.Length)
{
actualIndex = values.Length - 1;
}
DrawHistogramBar(g, ref drawingPoint, values, pen, fill, actualIndex, actualPreviousIndex, itemWidth, itemMargin);
drawingPoint.X = i * (itemMargin + itemWidth);
}
}
public override void Draw(GraphicsWrapper g, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
PointF drawingPoint = new PointF();
lock (this)
{
Image image;
foreach (float[] valueSet in ValueSets)
{
foreach (float value in valueSet)
{// Images mode does not apply unit unification
if (double.IsNaN(value) == false && drawingPoint.X >= clippingRectangle.X && drawingPoint.X <= clippingRectangle.X + clippingRectangle.Width &&
_images.ContainsKey((int)value))
{
image = _images[(int)value];
g.DrawImage(image, drawingPoint.X + _imagesDisplacement.X - image.Width / 2, drawingPoint.Y + _imagesDisplacement.Y + (float)value);
}
drawingPoint.X += itemMargin + itemWidth;
}
}
}
}
public override void Draw(GraphicsWrapper g, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
PointF drawingPoint = new PointF();
lock (this)
{
Image image;
foreach (float[] valueSet in ValueSets)
{
foreach (float value in valueSet)
{// Images mode does not apply unit unification
if (double.IsNaN(value) == false && drawingPoint.X >= clippingRectangle.X && drawingPoint.X <= clippingRectangle.X + clippingRectangle.Width
&& _images.ContainsKey((int)value))
{
image = _images[(int)value];
g.DrawImage(image, drawingPoint.X + _imagesDisplacement.X - image.Width / 2, drawingPoint.Y + _imagesDisplacement.Y + (float)value);
}
drawingPoint.X += itemMargin + itemWidth;
}
}
}
}
public void SynchronizeWithMainChartPane()
{
if (mainChartPane == null)
{
return;
}
// SystemMonitor.CheckThrow(_masterPaneSynchronizationMode == MainChartPaneSynchronizationModeEnum.XAxis, "Mode not supported.");
GraphicsWrapper.SynchronizeDrawingSpaceXAxis(mainChartPane.GraphicsWrapper);
RectangleF screen = GraphicsWrapper.ActualSpaceToDrawingSpace(ActualDrawingSpaceArea);
if (screen.X < 0)
{
screen.X = 0;
}
FitHorizontalAreaToScreen(screen);
UpdateMainChartSynchronizationState(true);
this.Refresh();
//this.Invalidate();
}
void DrawSelection(GraphicsWrapper g)
{
if (CurrentSelectionRectangle.HasValue == false)
{
return;
}
RectangleF selectionRectangle = CurrentSelectionRectangle.Value;
if (selectionRectangle.Width > 0 && selectionRectangle.Height > 0 &&
_lastDrawingSpaceMouseRightButtonPosition.HasValue && _currentDrawingSpaceMousePosition.HasValue)
{
if (_selectionPen != null)
{
g.DrawRectangle(_selectionPen, selectionRectangle.X, selectionRectangle.Y, selectionRectangle.Width, selectionRectangle.Height);
}
if (_selectionFill != null)
{
g.FillRectangle(_selectionFill, selectionRectangle);
}
}
}
public override void Draw(GraphicsWrapper g, PointF?mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace)
{
if (Visible == false)
{
return;
}
if (_controlPoints.Count < 1)
{
return;
}
if (_mode == ModeEnum.HorizontalLine || _mode == ModeEnum.VerticalLine)
{
PointF point1 = _controlPoints[0];
PointF point2 = new PointF(drawingSpace.X + drawingSpace.Width, _controlPoints[0].Y);
if (_mode == ModeEnum.VerticalLine)
{
point2 = new PointF(_controlPoints[0].X, drawingSpace.Y + drawingSpace.Height);
}
StretchSegmentToDrawingSpace(ref point1, ref point2, drawingSpace);
g.DrawLine(_pen, point1, point2);
if (Selected)
{
DrawControlPoints(g);
}
}
else
if (_controlPoints.Count == 1 && mousePosition.HasValue)
{
PointF point1 = _controlPoints[0];
PointF point2 = mousePosition.Value;
if (_mode == ModeEnum.Line)
{
StretchSegmentToDrawingSpace(ref point1, ref point2, drawingSpace);
}
g.DrawLine(_pen, point1, point2);
}
else if (_controlPoints.Count == 2)
{
PointF point1 = _controlPoints[0];
PointF point2 = _controlPoints[1];
if (_mode == ModeEnum.Line)
{
StretchSegmentToDrawingSpace(ref point1, ref point2, drawingSpace);
}
// Clipping opitmization.
RectangleF rectangle = new RectangleF(
Math.Min(point1.X, point2.X), Math.Min(point1.Y, point2.Y),
Math.Abs(point2.X - point1.X), Math.Abs(point2.Y - point1.Y));
if (rectangle.IntersectsWith(clippingRectangle) == false)
{
return;
}
//if (_isSegment == false)
//{// Draw the central line piece separately.
//g.DrawLine(_pen, _controlPoints[0], _controlPoints[1]);
//}
g.DrawLine(_pen, point1, point2);
if (Selected)
{
DrawControlPoints(g);
}
}
}
public override void Draw(GraphicsWrapper g, PointF? mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace)
{
if (Visible == false || _controlPoints.Count < 1)
{
return;
}
if (clippingRectangle.Contains(_controlPoints[0]) == false)
{// Clipping opitmization.
return;
}
SizeF size = g.MeasureString(_text, DefaultDynamicObjectFont);
if (size.Height < 0)
{
_rectangle = new RectangleF(_controlPoints[0].X, _controlPoints[0].Y + size.Height, size.Width, -size.Height);
}
else
{
_rectangle = new RectangleF(_controlPoints[0].X, _controlPoints[0].Y, size.Width, size.Height);
}
g.DrawString(_text, DefaultDynamicObjectFont, _brush, _controlPoints[0]);
if (Selected || IsBuilding)
{
g.DrawLine(Pens.Red, _rectangle.Location, new PointF(_rectangle.X + _rectangle.Width, _rectangle.Y));
}
// Rounding rectangle.
//g.DrawRectangle(Pens.White, _rectangle);
if (Selected)
{
DrawControlPoints(g);
}
}
public abstract void Draw(GraphicsWrapper g, PointF?mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace);
protected virtual void DrawPostActualSpaceOverlays(GraphicsWrapper g)
{
if (_titleFont != null && _titleFontBrush != null)
{
// Title
Rectangle titleRectangle = new Rectangle(_actualDrawingSpaceArea.Left, _actualDrawingSpaceArea.Top, 0, 0);
SizeF titleSize = g.MeasureString(_chartName, _titleFont);
titleRectangle.Size = new Size((int)titleSize.Width, (int)titleSize.Height);
g.DrawString(_chartName, _titleFont, _titleFontBrush, titleRectangle.Location);
}
if (_actualDrawingSpaceAreaBorderPen != null)
{
// Border
g.DrawRectangle(_actualDrawingSpaceAreaBorderPen, _actualDrawingSpaceArea.X - 1, _actualDrawingSpaceArea.Y - 1, _actualDrawingSpaceArea.Width + 1, _actualDrawingSpaceArea.Height + 1);
}
}
protected void DrawIcon(GraphicsWrapper g, Pen pen, Brush fill, Rectangle rectangle)
{
if (Visible == false)
{
return;
}
if (fill != null)
{
g.FillRectangle(fill, rectangle);
}
if (pen != null)
{
g.DrawRectangle(pen, rectangle);
}
}
public void SynchronizeDrawingSpaceXAxis(GraphicsWrapper masterWrapper)
{
lock (this)
{
// The current transformation matrix.
float[] elements = _drawingSpaceTransform.Elements;
// Modify the matrix only in X direction.
elements[0] = masterWrapper.DrawingSpaceTransform.Elements[0];
elements[4] = masterWrapper.DrawingSpaceTransform.Elements[4];
_drawingSpaceTransform = new Matrix(elements[0], elements[1], elements[2], elements[3], elements[4], elements[5]);
}
}
/// <summary> /// /// </summary> /// <param name="g"></param> /// <param name="unitsUnification">Draw a few units as one. Used when zooming is too big to show each unit - so unify them. 1 means no unification, 10 means unify 10 units together</param> /// <param name="clippingRectangle"></param> /// <param name="itemWidth"></param> /// <param name="itemMargin"></param> public abstract void Draw(GraphicsWrapper g, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin);
public override void Draw(GraphicsWrapper g, PointF? mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace)
{
if (Visible == false)
{
return;
}
if (_controlPoints.Count < 1)
{
return;
}
if (_mode == ModeEnum.HorizontalLine || _mode == ModeEnum.VerticalLine)
{
PointF point1 = _controlPoints[0];
PointF point2 = new PointF(drawingSpace.X + drawingSpace.Width, _controlPoints[0].Y);
if (_mode == ModeEnum.VerticalLine)
{
point2 = new PointF(_controlPoints[0].X, drawingSpace.Y + drawingSpace.Height);
}
StretchSegmentToDrawingSpace(ref point1, ref point2, drawingSpace);
g.DrawLine(_pen, point1, point2);
if (Selected)
{
DrawControlPoints(g);
}
}
else
if (_controlPoints.Count == 1 && mousePosition.HasValue)
{
PointF point1 = _controlPoints[0];
PointF point2 = mousePosition.Value;
if (_mode == ModeEnum.Line)
{
StretchSegmentToDrawingSpace(ref point1, ref point2, drawingSpace);
}
g.DrawLine(_pen, point1, point2);
}
else if (_controlPoints.Count == 2)
{
PointF point1 = _controlPoints[0];
PointF point2 = _controlPoints[1];
if (_mode == ModeEnum.Line)
{
StretchSegmentToDrawingSpace(ref point1, ref point2, drawingSpace);
}
// Clipping opitmization.
RectangleF rectangle = new RectangleF(
Math.Min(point1.X, point2.X), Math.Min(point1.Y, point2.Y),
Math.Abs(point2.X - point1.X), Math.Abs(point2.Y - point1.Y));
if (rectangle.IntersectsWith(clippingRectangle) == false)
{
return;
}
//if (_isSegment == false)
//{// Draw the central line piece separately.
//g.DrawLine(_pen, _controlPoints[0], _controlPoints[1]);
//}
g.DrawLine(_pen, point1, point2);
if (Selected)
{
DrawControlPoints(g);
}
}
}
public override void Draw(GraphicsWrapper g, int unitsUnification, System.Drawing.RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
base.Draw(g, unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
/// <summary>
/// Control points selection rectangle is rendered in absolute size, ignoring scaling.
/// </summary>
/// <param name="g"></param>
/// <param name="pen">Pass null to use default control point pen.</param>
protected void DrawControlPoints(GraphicsWrapper g)
{
float xMargin = 0.5f * Math.Abs(_defaultAbsoluteControlPointSelectionRectanglesSize / g.DrawingSpaceTransform.Elements[0]);
float yMargin = 0.5f * Math.Abs(_defaultAbsoluteControlPointSelectionRectanglesSize / g.DrawingSpaceTransform.Elements[3]);
for (int i = 0; i < _controlPoints.Count; i++)
{
PointF point = _controlPoints[i];
if (_selectedControlPoints.Contains(i))
{
g.DrawRectangle(_defaultSelectedControlPointPen, point.X - xMargin, point.Y - yMargin, xMargin * 2, yMargin * 2);
}
else
{
g.DrawRectangle(_defaultControlPointPen, point.X - xMargin, point.Y - yMargin, xMargin * 2, yMargin * 2);
}
}
}
/// <summary> /// /// </summary> public abstract void DrawSeriesIcon(GraphicsWrapper g, Rectangle rectangle);
protected void DrawColorAreaItem(GraphicsWrapper g, ref PointF drawingPoint, float[] values, Pen pen, Brush fill,
int index, int previousItemIndex, float itemWidth, float itemMargin)
{
float indexValue = values[index];
float previousItemIndexValue = values[previousItemIndex];
int unificationCount = index - previousItemIndex;
for (int i = previousItemIndex; i <= index; i++)
{
if (float.IsNaN(previousItemIndexValue))
{
previousItemIndexValue = values[i];
} else if (float.IsNaN(indexValue))
{
indexValue = values[i];
}
}
if (float.IsNaN(indexValue) || float.IsNaN(previousItemIndexValue))
{// Failed to find reasonable values to draw.
return;
}
if (fill != null)
{
g.FillPolygon(fill, new PointF[] {
drawingPoint,
new PointF(drawingPoint.X + (itemMargin + itemWidth) * unificationCount, drawingPoint.Y),
new PointF(drawingPoint.X + (itemMargin + itemWidth) * unificationCount, drawingPoint.Y + indexValue),
new PointF(drawingPoint.X, drawingPoint.Y + previousItemIndexValue) });
}
if (pen != null)
{
g.DrawLine(pen, drawingPoint.X, drawingPoint.Y + previousItemIndexValue,
drawingPoint.X + (itemMargin + itemWidth) * unificationCount, drawingPoint.Y + indexValue);
}
}
/// <summary> /// /// </summary> /// <param name="g"></param> /// <param name="unitsUnification">Draw a few units as one. Used when zooming is too big to show each unit - so unify them. 1 means no unification, 10 means unify 10 units together</param> /// <param name="clippingRectangle"></param> /// <param name="itemWidth"></param> /// <param name="itemMargin"></param> public abstract void Draw(GraphicsWrapper g, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin);
public void Draw(GraphicsWrapper g, RectangleF drawingSpaceClipping, CustomObject.DrawingOrderEnum drawingOrder)
{
foreach (CustomObject customObject in _dynamicCustomObjects)
{
if (customObject.DrawingOrder == drawingOrder)
{
customObject.Draw(g, _pane.CurrentDrawingSpaceMousePosition, drawingSpaceClipping, _pane.DrawingSpace);
}
}
if (_currentObjectBuilt != null)
{
_currentObjectBuilt.Draw(g, _pane.CurrentDrawingSpaceMousePosition, drawingSpaceClipping, _pane.DrawingSpace);
}
}
void DrawHistogramBar(GraphicsWrapper g, ref PointF drawingPoint, float[] values, Pen pen, Brush fill,
int index, int previousItemIndex, float itemWidth, float itemMargin)
{
float y = drawingPoint.Y;
double heightSum = 0;
int actualSumCount = 0;
int unificationCount = index - previousItemIndex;
for (int i = previousItemIndex; i <= index; i++)
{
if (float.IsNaN(values[i])
|| float.IsInfinity(values[i]))
{
continue;
}
heightSum += values[i];
actualSumCount++;
}
if (actualSumCount == 0)
{
return;
}
float height = (float)(heightSum / actualSumCount);
if (height < 0)
{
y += height;
height = -height;
}
if (fill != null)
{
g.FillRectangle(fill, drawingPoint.X, y, (itemWidth) * unificationCount, height);
}
if (pen != null)
{
g.DrawRectangle(pen, drawingPoint.X, y, itemWidth, height);
}
}
/// <summary> /// /// </summary> public abstract void DrawSeriesIcon(GraphicsWrapper g, Rectangle rectangle);
public override void DrawSeriesIcon(GraphicsWrapper g, Rectangle rectangle)
{
base.DrawIcon(g, _defaultPen, _fill, rectangle);
}
protected void DrawHistogramBars(GraphicsWrapper g, Pen pen, Brush fill, float[] values, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
PointF drawingPoint = new PointF();
int startIndex, endIndex;
GetDrawingRangeIndecesFromClippingRectange(clippingRectangle, drawingPoint, unitsUnification, out startIndex, out endIndex, itemWidth, itemMargin);
for (int i = startIndex + unitsUnification; i < endIndex && i < values.Length + unitsUnification - 1; i += unitsUnification)
{
int actualIndex = i;
int actualPreviousIndex = i - unitsUnification;
if (actualIndex >= values.Length)
{
actualIndex = values.Length - 1;
}
DrawHistogramBar(g, ref drawingPoint, values, pen, fill, actualIndex, actualPreviousIndex, itemWidth, itemMargin);
drawingPoint.X = i * (itemMargin + itemWidth);
}
}
void DrawGraphicSeriesLabels(GraphicsWrapper g, int initialMarginLeft)
{
_currentLabelsRectangles = new Rectangle[_series.Count];
for (int i = 0; i < _series.Count; i++)
{
if (i == 0)
{
_currentLabelsRectangles[0].X = initialMarginLeft;
}
else
{
_currentLabelsRectangles[i].X = _currentLabelsRectangles[i - 1].Right + (int)_labelsMargin;
}
_currentLabelsRectangles[i].Y = (int)_labelsTopMargin;
SizeF seriesSize = g.MeasureString(_series[i].Name, _labelsFont);
_currentLabelsRectangles[i].Size = new Size((int)seriesSize.Width, (int)seriesSize.Height);
int iconWidth = 18;
// Add space for series icon
_currentLabelsRectangles[i].Width += iconWidth;
if (_labelsFill != null)
{
g.FillRectangle(_labelsFill, _currentLabelsRectangles[i]);
}
if (_labelsFont != null)
{
g.DrawString(_series[i].Name, _labelsFont, _labelsFontBrush, _currentLabelsRectangles[i].X + iconWidth, _currentLabelsRectangles[i].Y);
}
_series[i].DrawSeriesIcon(g, new Rectangle(_currentLabelsRectangles[i].X + 2, _currentLabelsRectangles[i].Y + 2, 14, _currentLabelsRectangles[i].Height - 4));
}
}
protected void DrawLine(GraphicsWrapper g, Pen linePen, float[] values, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
PointF drawingPoint = new PointF();
int startIndex, endIndex;
GetDrawingRangeIndecesFromClippingRectange(clippingRectangle, drawingPoint, unitsUnification, out startIndex, out endIndex, itemWidth, itemMargin);
for (int i = startIndex + unitsUnification; i < endIndex && i < values.Length + unitsUnification - 1; i += unitsUnification)
{
int actualIndex = i;
int actualPreviousIndex = i - unitsUnification;
if (actualIndex >= values.Length)
{
actualIndex = values.Length - 1;
}
float previousValue = (float)values[actualPreviousIndex];
float value = (float)values[actualIndex];
if (float.IsNaN(previousValue) == false && float.IsNaN(value) == false)
{
g.DrawLine(linePen, drawingPoint.X, drawingPoint.Y + previousValue, drawingPoint.X + itemMargin + itemWidth, drawingPoint.Y + value);
}
drawingPoint.X = i * (itemMargin + itemWidth);
}
}
public override void DrawSeriesIcon(GraphicsWrapper g, Rectangle rectangle)
{
base.DrawIcon(g, _defaultPen, _fill, rectangle);
}
void DrawOrders(GraphicsWrapper g, int index, PointF drawingPoint, float itemWidth, float itemMargin,
List<Order> openingOrders, List<Order> closingOrders, BarData orderBarData, float lastBarX)
{
// Width is same as items in real coordinates.
float actualImageHeight = _imageDown.Height / Math.Abs(g.DrawingSpaceTransform.Elements[3]);
float yToXScaling = Math.Abs(g.DrawingSpaceTransform.Elements[0] / g.DrawingSpaceTransform.Elements[3]);
PointF updatedImageDrawingPoint = drawingPoint;
foreach (Order order in openingOrders)
{
DrawOrder(g, ref updatedImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, orderBarData, lastBarX, true);
}
foreach (Order order in closingOrders)
{
DrawOrder(g, ref updatedImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, orderBarData, lastBarX, false);
}
}
protected virtual void DrawInitialActualSpaceOverlays(GraphicsWrapper g, ChartSeries timeBasedSeries)
{
{// X Axis labels.
float totalItemWidth = _seriesItemWidth + _seriesItemMargin;
float actualXSpacing = _xAxisLabelSpacing * totalItemWidth;
if (_considerAxisLabelsSpacingScale)
{
int xScaling = Math.Abs((int)(1 / _graphicsWrapper.DrawingSpaceTransform.Elements[0]));
if (xScaling > 1)
{
actualXSpacing = actualXSpacing * xScaling;
}
}
// Set starting to the closes compatible positionactualXSpacing
// TODO : this can be optimized further by narrowing the range of xStart to end
float xStart = (int)(_drawingSpaceDisplayLimit.X / actualXSpacing);
xStart = xStart * actualXSpacing;
for (float i = xStart; i < _drawingSpaceDisplayLimit.X + _drawingSpaceDisplayLimit.Width; i += actualXSpacing)
{
PointF point = GraphicsWrapper.DrawingSpaceToActualSpace(new PointF(i, 0), true);
if (point.X > _actualDrawingSpaceArea.X - 10
&& point.X < _actualDrawingSpaceArea.X + _actualDrawingSpaceArea.Width)
{
int index = (int)(i / totalItemWidth);
string message = string.Empty;
if (timeBasedSeries != null)
{// If there is a leading dateAssignedSeries show labels based on its timing.
if (timeBasedSeries.MaximumIndex > index)
{
message = GeneralHelper.GetShortDateTime(timeBasedSeries.GetTimeAtIndex(index));
}
}
else
{
message = index.ToString(_xAxisLabelsFormat);
}
if (_axisLabelsFont != null && _xAxisLabelsFontBrush != null)
{
g.DrawString(message, _axisLabelsFont, _xAxisLabelsFontBrush, point.X, _actualDrawingSpaceArea.Y + _actualDrawingSpaceArea.Height);
}
// Draw the small line indicating where the string applies for.
g.DrawLine(_actualDrawingSpaceAreaBorderPen, point.X, _actualDrawingSpaceArea.Y + _actualDrawingSpaceArea.Height, point.X, _actualDrawingSpaceArea.Y + _actualDrawingSpaceArea.Height + 5);
}
}
}
if (_axisLabelsFont != null && _xAxisLabelsFontBrush != null)
{
_actualDrawingSpaceAreaMarginBottom = 20;
}
else
{
_actualDrawingSpaceAreaMarginBottom = 8;
}
{// Y Axis labels.
int? yAxisLabelsWidth = null;
float actualYSpacing = _yAxisLabelSpacing;
if (_considerAxisLabelsSpacingScale)
{
int yScaling = Math.Abs((int)(1 / _graphicsWrapper.DrawingSpaceTransform.Elements[3]));
if (yScaling > 1)
{
actualYSpacing = actualYSpacing * yScaling;
}
}
// Set starting to the closes compatible positionactualXSpacing
int maxDecimalPlaces = actualYSpacing.ToString().Length - 1;
float yStart = (int)(_drawingSpaceDisplayLimit.Y / actualYSpacing);
yStart = yStart * actualYSpacing;
// Round off to a fixed number of post decimal point digits, will only work for values under 1
yStart = (float)Math.Round(yStart, maxDecimalPlaces);
{
//float minLabelValue = yStart;
//float maxLabelValue = _drawingSpaceDisplayLimit.Y + _drawingSpaceDisplayLimit.Height;
// Harry--Modified
// This must auto adjust to format the number properly and always fit in 6 spaces.
// Specify positive, negative and zero formats.
_yAxisLabelsFormat = " #0.#####;-#0.#####; Zero";
//_yAxisLabelsFormat = " #0.##;-#0.##; Zero";
// original
//_yAxisLabelsFormat = " #0.#####;-#0.#####; Zero";
//_yAxisLabelsFormat = " 0.000;-0.000;Zero";
// The default is 6 positions total for the y axis labels.
yAxisLabelsWidth = ((int)g.MeasureString("00.00000", _axisLabelsFont).Width);
//yAxisLabelsWidth = ((int)g.MeasureString("00.00", _axisLabelsFont).Width);
}
if (yAxisLabelsWidth.HasValue)
{// Calculate the current margin and confirm with any controling subscriber.
_actualDrawingSpaceAreaMarginLeft = yAxisLabelsWidth.Value + 5;
if (ActualDrawingSpaceMarginLeftUpdateEvent != null)
{
_actualDrawingSpaceAreaMarginLeft = ActualDrawingSpaceMarginLeftUpdateEvent(this, _actualDrawingSpaceAreaMarginLeft);
}
}
// Pass 2 - actually draw the labels and label lines at the established and confirmed location.
for (float i = yStart; i < _drawingSpaceDisplayLimit.Y + _drawingSpaceDisplayLimit.Height; i += actualYSpacing)
{
i = (float)Math.Round(i, maxDecimalPlaces);
PointF point = GraphicsWrapper.DrawingSpaceToActualSpace(new PointF(0, i), true);
if (point.Y > _actualDrawingSpaceArea.Y &&
point.Y < _actualDrawingSpaceArea.Y + _actualDrawingSpaceArea.Height)
{
if (_axisLabelsFont != null && _yAxisLabelsFontBrush != null)
{
g.DrawString((i).ToString(_yAxisLabelsFormat), _axisLabelsFont, _yAxisLabelsFontBrush, _actualDrawingSpaceAreaMarginLeft - yAxisLabelsWidth.Value - 3, point.Y);
}
// Draw the small line indicating where the string applies for.
g.DrawLine(_actualDrawingSpaceAreaBorderPen, _actualDrawingSpaceAreaMarginLeft - 5, point.Y, _actualDrawingSpaceAreaMarginLeft, point.Y);
}
}
}
if (ShowSeriesLabels)
{
_actualDrawingSpaceAreaMarginTop = 30;
}
else
{
_actualDrawingSpaceAreaMarginTop = 5;
}
UpdateActualDrawingSpaceArea();
// Actual space, drawing area, grid.
_actualSpaceGrid.Draw(g, _actualDrawingSpaceArea, _actualDrawingSpaceArea, 1);
if (ShowSeriesLabels)
{
DrawGraphicSeriesLabels(g, _actualDrawingSpaceArea.Left);
}
// Show
if (_customObjectsManager.IsBuildingObject)
{
g.DrawImageUnscaledAndClipped(_customObjectDrawingImage, new Rectangle(4, (int)LabelsTopMargin, _customObjectDrawingImage.Width, _customObjectDrawingImage.Height));
}
}
public override void Draw(GraphicsWrapper g, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
if (this.Visible == false)
{
return;
}
lock (this)
{
if (_chartType == ChartTypeEnum.Line)
{
for (int i = 0; i < _valueSets.Count; i++)
{
if (_valueSetsPens[i] == null)
{
base.DrawLine(g, _defaultPen, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
else
{
base.DrawLine(g, _valueSetsPens[i], _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
}
}
else if (_chartType == ChartTypeEnum.Histogram)
{
for (int i = 0; i < _valueSets.Count; i++)
{
if (_valueSetsPens[i] == null)
{
base.DrawHistogramBars(g, _defaultPen, _fill, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
else
{
base.DrawHistogramBars(g, _valueSetsPens[i], _fill, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
}
}
else if (_chartType == ChartTypeEnum.ColoredArea)
{
for (int i = 0; i < _valueSets.Count; i++)
{
if (_valueSetsPens[i] == null)
{
base.DrawColoredArea(g, _defaultPen, _fill, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
else
{
base.DrawColoredArea(g, _valueSetsPens[i], _fill, _valueSets[i], unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
}
}
} // Lock
}
void DrawOrder(GraphicsWrapper g, ref PointF updatedImageDrawingPoint, Order order, float itemWidth, float itemMargin,
float yToXScaling, BarData orderBarData, float lastBarX, bool drawOpening)
{
Image image = _imageUp;
Brush brush = Brushes.Green;
Pen dashedPen = _buyDashedPen;
Pen pen = Pens.GreenYellow;
if (order.IsBuy == false)
{
image = _imageDown;
brush = Brushes.Red;
pen = Pens.Red;
dashedPen = _sellDashedPen;
}
if (drawOpening == false)
{
image = _imageCross;
}
float price = (float)order.OpenPrice;
if (drawOpening == false)
{
price = (float)order.ClosePrice;
}
if (drawOpening && _showPendingOrdersTracing && order.IsOpen)
{// Open orders tracking line.
PointF point1 = new PointF(updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + price);
float sellPrice = (float)_dataProvider.Bid;
if (order.IsBuy == false)
{
sellPrice = (float)_dataProvider.Ask;
}
PointF point2 = new PointF(lastBarX - itemWidth / 2f, updatedImageDrawingPoint.Y + sellPrice);
g.DrawLine(dashedPen, point1, point2);
}
//if (drawOpening && _showClosedOrdersTracing && order.IsOpen == false)
//{// Closed order tracking.
// Close order tracing is implemented in main draw function.
//}
if (_showOrderSpot)
{
PointF basePoint = new PointF(updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y + price);
float height = (yToXScaling * itemWidth);
if (order.IsBuy == false)
{
height = -height;
}
if (drawOpening)
{
g.FillPolygon(brush, new PointF[] { basePoint, new PointF(basePoint.X + itemWidth, basePoint.Y),
new PointF(basePoint.X + (itemWidth / 2f), basePoint.Y + height) });
g.DrawPolygon(Pens.White, new PointF[] { basePoint, new PointF(basePoint.X + itemWidth, basePoint.Y),
new PointF(basePoint.X + (itemWidth / 2f), basePoint.Y + height) });
// Take profit level.
if (double.IsInfinity(order.SourceTakeProfit) == false &&
double.IsNaN(order.SourceTakeProfit) == false &&
order.SourceTakeProfit != 0)
{
g.DrawLine(pen, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y + (float)order.SourceTakeProfit,
updatedImageDrawingPoint.X + itemWidth, updatedImageDrawingPoint.Y + (float)order.SourceTakeProfit);
g.DrawLine(pen, updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + (float)order.SourceTakeProfit,
updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + (float)order.SourceTakeProfit - height);
}
// Stop loss level.
if (double.IsInfinity(order.SourceStopLoss) == false &&
double.IsNaN(order.SourceStopLoss) == false &&
order.SourceStopLoss != 0)
{
g.DrawLine(pen, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y + (float)order.SourceStopLoss,
updatedImageDrawingPoint.X + itemWidth, updatedImageDrawingPoint.Y + (float)order.SourceStopLoss);
g.DrawLine(pen, updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + (float)order.SourceStopLoss,
updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + (float)order.SourceStopLoss + height);
}
}
else
{
g.DrawRectangle(Pens.White, basePoint.X, basePoint.Y,
itemWidth, yToXScaling * itemWidth);
}
}
float imageHeight = 2 * (yToXScaling * itemWidth);
if (_showOrderArrow)
{
// Draw up image.
g.DrawImage(image, updatedImageDrawingPoint.X - (itemWidth / 2f), updatedImageDrawingPoint.Y +
(float)orderBarData.Low - (yToXScaling * itemWidth), 2 * itemWidth, -imageHeight);
updatedImageDrawingPoint.Y -= 1.2f * imageHeight;
}
}
void DrawOrder(GraphicsWrapper g, ref PointF updatedImageDrawingPoint, Order order, float itemWidth, float itemMargin,
float yToXScaling, BarData orderBarData, float lastBarX, bool drawOpening)
{
Image image = _imageUp;
Brush brush = Brushes.Green;
Pen dashedPen = _buyDashedPen;
Pen pen = Pens.GreenYellow;
if (order.IsBuy == false)
{
image = _imageDown;
brush = Brushes.Red;
pen = Pens.Red;
dashedPen = _sellDashedPen;
}
if (drawOpening == false)
{
image = _imageCross;
}
float price = (float)order.OpenPrice;
if (drawOpening == false)
{
price = (float)order.ClosePrice;
}
if (drawOpening && _showPendingOrdersTracing && order.IsOpen)
{// Open orders tracking line.
PointF point1 = new PointF(updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + price);
float sellPrice = (float)_dataProvider.Bid;
if (order.IsBuy == false)
{
sellPrice = (float)_dataProvider.Ask;
}
PointF point2 = new PointF(lastBarX - itemWidth / 2f, updatedImageDrawingPoint.Y + sellPrice);
g.DrawLine(dashedPen, point1, point2);
}
//if (drawOpening && _showClosedOrdersTracing && order.IsOpen == false)
//{// Closed order tracking.
// Close order tracing is implemented in main draw function.
//}
if (_showOrderSpot)
{
PointF basePoint = new PointF(updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y + price);
float height = (yToXScaling * itemWidth);
if (order.IsBuy == false)
{
height = -height;
}
if (drawOpening)
{
g.FillPolygon(brush, new PointF[] { basePoint, new PointF(basePoint.X + itemWidth, basePoint.Y),
new PointF(basePoint.X + (itemWidth / 2f), basePoint.Y + height) });
g.DrawPolygon(Pens.White, new PointF[] { basePoint, new PointF(basePoint.X + itemWidth, basePoint.Y),
new PointF(basePoint.X + (itemWidth / 2f), basePoint.Y + height) });
// Take profit level.
if (double.IsInfinity(order.SourceTakeProfit) == false
&& double.IsNaN(order.SourceTakeProfit) == false
&& order.SourceTakeProfit != 0)
{
g.DrawLine(pen, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y + (float)order.SourceTakeProfit,
updatedImageDrawingPoint.X + itemWidth, updatedImageDrawingPoint.Y + (float)order.SourceTakeProfit);
g.DrawLine(pen, updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + (float)order.SourceTakeProfit,
updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + (float)order.SourceTakeProfit - height);
}
// Stop loss level.
if (double.IsInfinity(order.SourceStopLoss) == false
&& double.IsNaN(order.SourceStopLoss) == false
&& order.SourceStopLoss != 0)
{
g.DrawLine(pen, updatedImageDrawingPoint.X, updatedImageDrawingPoint.Y + (float)order.SourceStopLoss,
updatedImageDrawingPoint.X + itemWidth, updatedImageDrawingPoint.Y + (float)order.SourceStopLoss);
g.DrawLine(pen, updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + (float)order.SourceStopLoss,
updatedImageDrawingPoint.X + itemWidth / 2f, updatedImageDrawingPoint.Y + (float)order.SourceStopLoss + height);
}
}
else
{
g.DrawRectangle(Pens.White, basePoint.X, basePoint.Y,
itemWidth, yToXScaling * itemWidth);
}
}
float imageHeight = 2 * (yToXScaling * itemWidth);
if (_showOrderArrow)
{
// Draw up image.
g.DrawImage(image, updatedImageDrawingPoint.X - (itemWidth / 2f), updatedImageDrawingPoint.Y +
(float)orderBarData.Low - (yToXScaling * itemWidth), 2 * itemWidth, -imageHeight);
updatedImageDrawingPoint.Y -= 1.2f * imageHeight;
}
}
void DrawDrawingSpace(GraphicsWrapper g)
{
RectangleF drawingSpaceClipping = _actualDrawingSpaceArea;
drawingSpaceClipping.X -= _seriesItemMargin + _seriesItemWidth;
drawingSpaceClipping.Y -= _seriesItemMargin + _seriesItemWidth;
drawingSpaceClipping.Width += 2 * (_seriesItemMargin + _seriesItemWidth);
drawingSpaceClipping.Height += 2 * (_seriesItemMargin + _seriesItemWidth);
drawingSpaceClipping = GraphicsWrapper.ActualSpaceToDrawingSpace(drawingSpaceClipping);
//drawingSpaceClipping.Y = DrawingSpace.Y - 10;
//drawingSpaceClipping.Height = DrawingSpace.Height + 10;
// Grid.
_drawingSpaceGrid.Draw(g, drawingSpaceClipping, _drawingSpace, _seriesItemMargin + _seriesItemWidth);
// Show clipping rectangle.
if (ShowClippingRectangle)
{
Pen clippingRectanglePen = (Pen)Pens.DarkGray.Clone();
clippingRectanglePen.DashStyle = DashStyle.Dash;
g.DrawRectangle(clippingRectanglePen, drawingSpaceClipping.X, drawingSpaceClipping.Y, drawingSpaceClipping.Width, drawingSpaceClipping.Height);
}
// Draw custom objects - pre series.
_customObjectsManager.Draw(g, drawingSpaceClipping, CustomObject.DrawingOrderEnum.PreSeries);
// Series.
foreach (ChartSeries series in _series)
{
series.Draw(g, CurrentUnitUnification, drawingSpaceClipping, _seriesItemWidth, _seriesItemMargin);
}
// Draw custom objects - post series.
_customObjectsManager.Draw(g, drawingSpaceClipping, CustomObject.DrawingOrderEnum.PostSeries);
}
/// <summary>
///
/// </summary>
/// <param name="g"></param>
/// <param name="unitsUnification">Draw a few units as one. Used when zooming is too big to show each unit - so unify them. 1 means no unification, 10 means unify 10 units together</param>
/// <param name="clippingRectangle"></param>
/// <param name="itemWidth"></param>
/// <param name="itemMargin"></param>
public override void Draw(GraphicsWrapper g, int unitsUnification, RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
if (Visible == false)
{
return;
}
PointF drawingPoint = new PointF();
lock (this)
{
if (_chartType == ChartTypeEnum.Line)
{
SetChartType(SimpleChartSeries.ChartTypeEnum.Line);
base.Draw(g, unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
else if (_chartType == ChartTypeEnum.Histogram)
{
SetChartType(SimpleChartSeries.ChartTypeEnum.Histogram);
base.Draw(g, unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
else if (_chartType == ChartTypeEnum.ColoredArea)
{
SetChartType(SimpleChartSeries.ChartTypeEnum.ColoredArea);
base.Draw(g, unitsUnification, clippingRectangle, itemWidth, itemMargin);
}
else if (_chartType == ChartTypeEnum.CandleStick || _chartType == ChartTypeEnum.BarChart)
{// Unit unification is done trough combining many bars together.
List <BarData> combinationDatas = new List <BarData>();
bool timeGapFound = false;
int startIndex, endIndex;
GetDrawingRangeIndecesFromClippingRectange(clippingRectangle, drawingPoint, unitsUnification, out startIndex, out endIndex, itemWidth, itemMargin);
float volumeDisplayRange = clippingRectangle.Height / 4f;
double volumeDisplayMultiplicator = volumeDisplayRange / _maxVolume;
for (int i = startIndex; i < endIndex && i < _dataBars.Count; i++)
{
combinationDatas.Add(_dataBars[i]);
if (unitsUnification == 1 && ShowTimeGaps && i > 0 && _dataBars[i].DateTime - _dataBars[i - 1].DateTime != _period)
{
timeGapFound = true;
}
if (i % unitsUnification == 0)
{
BarData combinedData = BarData.CombinedBar(combinationDatas.ToArray());
if (i == _dataBars.Count - 1)
{
Console.WriteLine(" LAST combinedData ###### " + combinedData);
}
combinationDatas.Clear();
if (combinedData.HasDataValues)
//&& drawingPoint.X >= clippingRectangle.X
//&& drawingPoint.X <= clippingRectangle.X + clippingRectangle.Width)
{
if (timeGapFound && ShowTimeGaps && _timeGapsLinePen != null)
{// Draw time gap.
timeGapFound = false;
g.DrawLine(_timeGapsLinePen, new PointF(drawingPoint.X, clippingRectangle.Y), new PointF(drawingPoint.X, clippingRectangle.Y + clippingRectangle.Height));
//g.DrawLine(_timeGapsLinePen, new PointF(drawingPoint.X, clippingRectangle.Y), new PointF(drawingPoint.X, (float)(data.High)));
//g.DrawLine(_timeGapsLinePen, new PointF(drawingPoint.X, (float)(data.High + data.BarTotalLength / 2f)), new PointF(drawingPoint.X, clippingRectangle.Y + clippingRectangle.Height));
}
if (_chartType == ChartTypeEnum.CandleStick)
{
if (i > 0 && combinedData.Open > _dataBars[i - 1].Close)
{
combinedData.IsHigherPrev = true;
}
DrawCandleStick(g, ref drawingPoint, combinedData, itemWidth, itemMargin, unitsUnification);
}
else
{
DrawBar(g, ref drawingPoint, combinedData, itemWidth, itemMargin, unitsUnification);
}
// Draw volume for this bar.
if (_showVolume)
{
float actualHeight = (float)(combinedData.Volume * volumeDisplayMultiplicator);
g.DrawLine(_volumePen, drawingPoint.X, clippingRectangle.Y, drawingPoint.X, clippingRectangle.Y + actualHeight);
}
if (combinedData.Sar != 0)
{
float dy = drawingPoint.Y;
float y = (drawingPoint.Y + (float)combinedData.Sar);
float yts = Math.Abs(g.DrawingSpaceTransform.Elements[0] / g.DrawingSpaceTransform.Elements[3]);
float x = drawingPoint.X + (1 + yts) * itemWidth * 3f / 16f;
//float x = drawingPoint.X + (1 + yts) * itemWidth * 3f / 8f;
if (combinedData.Sar >= combinedData.Low && combinedData.High >= combinedData.Sar)
{
g.DrawEllipse(new Pen(Color.White), x, y, yts * itemWidth / 2f, yts * itemWidth / 2f);
}
else
{
g.DrawEllipse(new Pen(Color.White), x, y, yts * itemWidth / 2f, yts * itemWidth / 2f);
}
if (combinedData.Boll != null)
{
float uy = dy + (float)combinedData.Boll[BOLL.UPPER];
float my = dy + (float)combinedData.Boll[BOLL.MID];
float ly = dy + (float)combinedData.Boll[BOLL.LOWER];
g.DrawEllipse(new Pen(Color.Cyan), x, uy, yts * itemWidth / 2f, yts * itemWidth / 2f);
g.DrawEllipse(new Pen(Color.Cyan), x, my, yts * itemWidth / 2f, yts * itemWidth / 2f);
g.DrawEllipse(new Pen(Color.Cyan), x, ly, yts * itemWidth / 2f, yts * itemWidth / 2f);
}
}
// Harry --- Draw Signal
//_dataBars[i].RefreshExValues();
float actualImageHeight = _imageDown.Height / Math.Abs(g.DrawingSpaceTransform.Elements[3]);
float yToXScaling = Math.Abs(g.DrawingSpaceTransform.Elements[0] / g.DrawingSpaceTransform.Elements[3]);
PointF upImageDrawingPoint = drawingPoint;
PointF downImageDrawingPoint = drawingPoint;
Order order = new Order();
BarData orderBarData = _dataBars[i];
float lastBarX = (itemMargin + itemWidth) * _dataBars.Count;
if (_dataBars[i].SignalList != null && _dataBars[i].SignalList.Count > 0)
{
foreach (CandleSignal cs in _dataBars[i].SignalList)
{
cs.BarData = orderBarData;
if (cs.Code == 1)
{
DrawSignal(g, ref downImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, cs, lastBarX, false);
}
if (cs.Code == -1)
{
DrawSignal(g, ref upImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, cs, lastBarX, false);
}
if (cs.Code == 2)
{
DrawGainTip(g, ref upImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, cs, lastBarX, false);
}
if (cs.Code == -2)
{
DrawGainTip(g, ref downImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, cs, lastBarX, false);
}
if (cs.Code == 3)
{
DrawStopLoss(g, ref downImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, cs, lastBarX, false);
}
if (cs.Code == -3)
{
DrawStopLoss(g, ref upImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, cs, lastBarX, false);
}
if (cs.Code == 4)
{
DrawStopGain(g, ref upImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, cs, lastBarX, false);
}
if (cs.Code == -4)
{
DrawStopGain(g, ref downImageDrawingPoint, order, itemWidth, itemMargin, yToXScaling, cs, lastBarX, false);
}
}
}
}
drawingPoint.X = (i + 1) * (itemMargin + itemWidth);
}
}
}
}
}
public abstract void Draw(GraphicsWrapper g, PointF? mousePosition, RectangleF clippingRectangle, RectangleF drawingSpace);
/// <summary>
/// Enter locked.
/// </summary>
void DrawCandleStick(GraphicsWrapper g, ref PointF startingPoint, BarData barData, float itemWidth, float itemMargin, int itemUnitification)
{
if (barData.BarIsRising || (barData.IsHigherPrev && barData.BarBodyLength == 0))
{
if (_risingBarFill != null)
{
g.FillRectangle(_risingBarFill, startingPoint.X, startingPoint.Y + (float)barData.Open, itemWidth, (float)barData.BarBodyLength);
}
if (_risingBarPen != null)
{
if (itemWidth > 4)
{
g.DrawRectangle(_risingBarPen, startingPoint.X, startingPoint.Y + (float)barData.Open, itemWidth, (float)barData.BarBodyLength);
// Harry -- Draw a line for open = = close
if ((float)barData.BarBodyLength <= 0)
{
g.DrawLine(_risingBarPen,
startingPoint.X,
startingPoint.Y + (float)barData.Close,
startingPoint.X + itemWidth,
startingPoint.Y + (float)barData.Close);
}
}
else
{
g.FillRectangle(Brushes.Green, startingPoint.X, startingPoint.Y + (float)barData.Open, itemWidth, (float)barData.BarBodyLength);
}
// Lower shadow
g.DrawLine(_risingBarPen,
startingPoint.X + itemWidth / 2,
startingPoint.Y + (float)barData.Low,
startingPoint.X + itemWidth / 2,
startingPoint.Y + (float)barData.Open);
// Upper shadow
g.DrawLine(_risingBarPen,
startingPoint.X + itemWidth / 2,
(float)(startingPoint.Y + barData.High),
startingPoint.X + itemWidth / 2,
(float)(startingPoint.Y + barData.Close));
//Console.WriteLine(" startingPoint.X " + startingPoint.X + " startingPoint.Y " + startingPoint.Y + " (float)barData.Low " + (float)barData.Low + " (float)barData.Close " + (float)barData.Close + " (float)barData.High " + (float)barData.High + " (float)barData.Open " + (float)barData.Open);
}
}
else
{
if (_fallingBarFill != null)
{
g.FillRectangle(_fallingBarFill, startingPoint.X, startingPoint.Y + (float)barData.Close, itemWidth, (float)barData.BarBodyLength);
// Harry -- Draw a line for open = = close
if ((float)barData.BarBodyLength <= 0)
{
g.DrawLine(_fallingBarPen,
startingPoint.X,
startingPoint.Y + (float)barData.Close,
startingPoint.X + itemWidth,
startingPoint.Y + (float)barData.Close);
}
}
if (_fallingBarPen != null)
{
if (itemWidth >= 4)
{// Only if an item is clearly visible, show the border, otherwise, hide to improver overal visibility.
// Showing this border adds nice detail on close zooming, but not useful otherwise.
g.DrawRectangle(_fallingBarPen, startingPoint.X, startingPoint.Y + (float)barData.Close, itemWidth, (float)barData.BarBodyLength);
}
// Lower shadow
g.DrawLine(_fallingBarPen,
startingPoint.X + itemWidth / 2,
startingPoint.Y + (float)barData.Low,
startingPoint.X + itemWidth / 2,
startingPoint.Y + (float)barData.Close);
// Upper shadow
g.DrawLine(_fallingBarPen,
startingPoint.X + itemWidth / 2,
(float)(startingPoint.Y + barData.High),
startingPoint.X + itemWidth / 2,
(float)(startingPoint.Y + barData.Open));
}
}
}
public void Draw(GraphicsWrapper g, RectangleF clipping, RectangleF space, float totalItemWidth)
{
if (Visible == false)
{
return;
}
_pen.DashStyle = DashStyle.Dash;
Console.WriteLine(" space ************************************************** " + space);
Console.WriteLine(" clipping ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ " + clipping);
if (VerticalLineSpacing.HasValue)
{
float actualSpacing = _verticalLineSpacing.Value * totalItemWidth;
if (ConsiderScale)
{
int xScaling = Math.Abs((int)(1 / g.DrawingSpaceTransform.Elements[0]));
if (xScaling > 1)
{
actualSpacing = actualSpacing * xScaling;
}
}
// Set starting to the closes compatible position.
float starting = (int)(space.Left / actualSpacing);
starting = starting * actualSpacing;
for (float x = starting; x <= space.Right; x += actualSpacing)
{// Vertical lines.
if (x >= clipping.X && x <= clipping.X + clipping.Width + actualSpacing)
{
g.DrawLine(_pen, x, Math.Max(space.Top, clipping.Top), x, Math.Min(space.Bottom, clipping.Bottom));
}
}
}
if (HorizontalLineSpacing.HasValue)
{
float actualSpacing = _horizontalLineSpacing.Value;
//Console.WriteLine(" actualSpacing ************************************************** " + actualSpacing);
if (ConsiderScale)
{
int yScaling = Math.Abs((int)(1 / g.DrawingSpaceTransform.Elements[3]));
Console.WriteLine(" yScaling ************************************************** " + yScaling);
if (yScaling > 1)
{
actualSpacing = actualSpacing * yScaling;
Console.WriteLine(" actualSpacing ************************************************** " + actualSpacing);
}
}
// Set starting to the closes compatible position.
float starting = (int)(space.Top / actualSpacing);
starting = starting * actualSpacing;
//actualSpacing = actualSpacing * 0.5f;
for (float y = starting; y <= space.Bottom; y += actualSpacing)
{// Horizontal lines.
if (y >= clipping.Y && y <= clipping.Y + clipping.Height)
{
g.DrawLine(_pen, Math.Min(space.Left, clipping.Left), y, Math.Max(space.Right, clipping.Right), y);
//g.DrawLine(_pen, Math.Max(space.Left, clipping.Left), y, Math.Min(space.Right, clipping.Right), y);
}
}
}
}
public override void Draw(GraphicsWrapper g, int unitsUnification,
RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
base.Draw(g, unitsUnification, clippingRectangle, itemWidth, itemMargin);
if (Visible == false)
{
return;
}
// Draw ask line.
if (_dataProvider != null && _drawCurrentPriceLevel) //&& _dataProvider.OperationalState == OperationalStateEnum.Operational)
{
float price = (float)_dataProvider.Bid;
g.DrawLine(_priceLevelPen, clippingRectangle.X, price, clippingRectangle.X + clippingRectangle.Width, price);
}
List <Order> ordersOpening;
// Draw orders locations on chart.
lock (this)
{
if (_orderExecutionProvider == null)
{
return;
}
// Render orders.
ordersOpening = new List <Order>(_orderExecutionProvider.Orders);
}
// Use for orders closes.
List <Order> ordersClosing = new List <Order>();
foreach (Order order in ordersOpening)
{
if (order.IsOpen == false)
{// Only add orders already closed.
ordersClosing.Add(order);
}
}
// This is used later on, since ordersClosing is modified.
List <Order> ordersClosed = new List <Order>(ordersClosing);
// Orders opening at current bar.
List <Order> pendingOpeningOrders = new List <Order>();
// Order closing at current bar.
List <Order> pendingClosingOrders = new List <Order>();
PointF drawingPoint = new PointF();
int startIndex, endIndex;
GetDrawingRangeIndecesFromClippingRectange(clippingRectangle, drawingPoint, unitsUnification, out startIndex, out endIndex, itemWidth, itemMargin);
lock (this)
{
float lastBarX = (itemMargin + itemWidth) * _dataBars.Count;
for (int i = startIndex; i < endIndex && i < _dataBars.Count &&
(ordersOpening.Count > 0 || ordersClosing.Count > 0); i++)
{ // Foreach bar, draw orders (and volume).
while (ordersOpening.Count > 0)
{ // All orders before now.
if (ordersOpening[0].SourceOpenTime < (_dataBars[i].DateTime - _dataProvider.TimeInterval))
{ // Order before time period.
if (ordersOpening[0].IsOpen && _showPendingOrdersTracing)
{ // Since it is an open pending order, we shall also need to draw it as well.
pendingOpeningOrders.Add(ordersOpening[0]);
}
ordersOpening.RemoveAt(0);
continue;
}
if (ordersOpening[0].SourceOpenTime > _dataBars[i].DateTime)
{// Order after time period - look no further.
break;
}
// Order open is within the current period.
// Only if order is part of the current period - add to pending.
pendingOpeningOrders.Add(ordersOpening[0]);
ordersOpening.RemoveAt(0);
}
for (int j = ordersClosing.Count - 1; j >= 0; j--)
{
if (ordersClosing[j].SourceCloseTime >= (_dataBars[i].DateTime - _dataProvider.TimeInterval) &&
ordersClosing[j].SourceCloseTime <= _dataBars[i].DateTime)
{// Order close is within the current period.
pendingClosingOrders.Add(ordersClosing[j]);
ordersClosing.RemoveAt(j);
}
}
drawingPoint.X = i * (itemMargin + itemWidth);
DrawOrders(g, i, drawingPoint, itemWidth, itemMargin, pendingOpeningOrders, pendingClosingOrders, _dataProvider.DataUnits[i], lastBarX);
pendingOpeningOrders.Clear();
pendingClosingOrders.Clear();
}
if (_showClosedOrdersTracing && _dataBars.Count > 0 && startIndex < _dataBars.Count)
{// Since a closed order may be before or after (or during) the curren set of periods - make a special search and render for them.
endIndex = Math.Max(0, endIndex);
endIndex = Math.Min(_dataBars.Count - 1, endIndex);
foreach (Order order in ordersClosed)
{
if (order.SourceOpenTime <= _dataBars[endIndex].DateTime &&
order.SourceCloseTime >= _dataBars[startIndex].DateTime - _dataProvider.TimeInterval)
{
int openIndex = _dataProvider.GetBarIndexAtTime(order.SourceOpenTime);
int closeIndex = _dataProvider.GetBarIndexAtTime(order.SourceCloseTime);
Pen pen = _buyDashedPen;
if (order.IsBuy == false)
{
pen = _sellDashedPen;
}
g.DrawLine(pen, new PointF(openIndex * (itemWidth + itemMargin), (float)order.OpenPrice),
new PointF(closeIndex * (itemWidth + itemMargin), (float)order.ClosePrice));
}
}
}
} // Lock
}
public override void Draw(GraphicsWrapper g, int unitsUnification,
RectangleF clippingRectangle, float itemWidth, float itemMargin)
{
base.Draw(g, unitsUnification, clippingRectangle, itemWidth, itemMargin);
if (Visible == false)
{
return;
}
// Draw ask line.
if (_dataProvider != null && _drawCurrentPriceLevel ) //&& _dataProvider.OperationalState == OperationalStateEnum.Operational)
{
float price = (float)_dataProvider.Bid;
g.DrawLine(_priceLevelPen, clippingRectangle.X, price, clippingRectangle.X + clippingRectangle.Width, price);
}
List<Order> ordersOpening;
// Draw orders locations on chart.
lock(this)
{
if (_orderExecutionProvider == null)
{
return;
}
// Render orders.
ordersOpening = new List<Order>(_orderExecutionProvider.Orders);
}
// Use for orders closes.
List<Order> ordersClosing = new List<Order>();
foreach (Order order in ordersOpening)
{
if (order.IsOpen == false)
{// Only add orders already closed.
ordersClosing.Add(order);
}
}
// This is used later on, since ordersClosing is modified.
List<Order> ordersClosed = new List<Order>(ordersClosing);
// Orders opening at current bar.
List<Order> pendingOpeningOrders = new List<Order>();
// Order closing at current bar.
List<Order> pendingClosingOrders = new List<Order>();
PointF drawingPoint = new PointF();
int startIndex, endIndex;
GetDrawingRangeIndecesFromClippingRectange(clippingRectangle, drawingPoint, unitsUnification, out startIndex, out endIndex, itemWidth, itemMargin);
lock (this)
{
float lastBarX = (itemMargin + itemWidth) * _dataBars.Count;
for (int i = startIndex; i < endIndex && i < _dataBars.Count
&& (ordersOpening.Count > 0 || ordersClosing.Count > 0); i++)
{// Foreach bar, draw orders (and volume).
while (ordersOpening.Count > 0)
{// All orders before now.
if (ordersOpening[0].SourceOpenTime < (_dataBars[i].DateTime - _dataProvider.TimeInterval))
{// Order before time period.
if (ordersOpening[0].IsOpen && _showPendingOrdersTracing)
{// Since it is an open pending order, we shall also need to draw it as well.
pendingOpeningOrders.Add(ordersOpening[0]);
}
ordersOpening.RemoveAt(0);
continue;
}
if (ordersOpening[0].SourceOpenTime > _dataBars[i].DateTime)
{// Order after time period - look no further.
break;
}
// Order open is within the current period.
// Only if order is part of the current period - add to pending.
pendingOpeningOrders.Add(ordersOpening[0]);
ordersOpening.RemoveAt(0);
}
for (int j = ordersClosing.Count - 1; j >= 0; j--)
{
if (ordersClosing[j].SourceCloseTime >= (_dataBars[i].DateTime - _dataProvider.TimeInterval) &&
ordersClosing[j].SourceCloseTime <= _dataBars[i].DateTime)
{// Order close is within the current period.
pendingClosingOrders.Add(ordersClosing[j]);
ordersClosing.RemoveAt(j);
}
}
drawingPoint.X = i * (itemMargin + itemWidth);
DrawOrders(g, i, drawingPoint, itemWidth, itemMargin, pendingOpeningOrders, pendingClosingOrders, _dataProvider.DataUnits[i], lastBarX);
pendingOpeningOrders.Clear();
pendingClosingOrders.Clear();
}
if (_showClosedOrdersTracing && _dataBars.Count > 0 && startIndex < _dataBars.Count)
{// Since a closed order may be before or after (or during) the curren set of periods - make a special search and render for them.
endIndex = Math.Max(0, endIndex);
endIndex = Math.Min(_dataBars.Count - 1, endIndex);
foreach (Order order in ordersClosed)
{
if (order.SourceOpenTime <= _dataBars[endIndex].DateTime
&& order.SourceCloseTime >= _dataBars[startIndex].DateTime - _dataProvider.TimeInterval)
{
int openIndex = _dataProvider.GetBarIndexAtTime(order.SourceOpenTime);
int closeIndex = _dataProvider.GetBarIndexAtTime(order.SourceCloseTime);
Pen pen = _buyDashedPen;
if (order.IsBuy == false)
{
pen = _sellDashedPen;
}
g.DrawLine(pen, new PointF(openIndex * (itemWidth + itemMargin), (float)order.OpenPrice),
new PointF(closeIndex * (itemWidth + itemMargin), (float)order.ClosePrice));
}
}
}
} // Lock
}
