internal LevelControlCluster(ZigBeeEndPoint endPoint, List <UInt16> supportedAttributes)
: base(endPoint)
{
// set cluster name and cluster Id
Name = CLUSTER_NAME;
m_Id = CLUSTER_ID;
// if supportedAttributes is null assume all attributes supported
bool supportAllAttributesBydefault = false;
if (supportedAttributes == null)
{
supportAllAttributesBydefault = true;
}
// current level attribute (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_CURRENTLEVEL))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_CURRENTLEVEL, "CurrentLevel", ZclHelper.UINT8_TYPE, true, false);
m_attributeList.Add(attrib.Id, attrib);
}
// remaining time attribute (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_REMAININGTIME))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_REMAININGTIME, "RemainingTime", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// on/off transition time attribute (read/write)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_ONOFFTRANSITIONTIME))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_ONOFFTRANSITIONTIME, "OnOffTransitionTime", ZclHelper.UINT16_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// on level attribute (read/write)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_ONLEVEL))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_ONLEVEL, "OnLevel", ZclHelper.UINT8_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// IMPORTANT NOTE, parameters MUST be added in parameter list of each command
// in the order specified in ZCL standard
// move to level command (no response required)
var command = new ZclCommand(this, COMMAND_MOVETOLEVEL, "MoveToLevel", false);
var parameter = new ZclValue(ZclHelper.UINT8_TYPE, LEVEL_PARAM);
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// Move command (no response required)
command = new ZclCommand(this, COMMAND_MOVE, "Move", false);
parameter = new ZclValue(ZclHelper.ENUMERATION_8_BIT_TYPE, "MoveMode");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "Rate");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// Step command (no response required)
command = new ZclCommand(this, COMMAND_STEP, "Step", false);
parameter = new ZclValue(ZclHelper.ENUMERATION_8_BIT_TYPE, "StepMode");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "StepSize");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// Stop command (no response required)
command = new ZclCommand(this, COMMAND_STOP, "Stop", false);
m_commandList.Add(command.Id, command);
// move to level with on/off command (no response required)
command = new ZclCommand(this, COMMAND_MOVETOLEVEL_WITHONOFF, "MoveToLevelWithOnOff", false);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, LEVEL_PARAM);
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// Move command (no response required)
command = new ZclCommand(this, COMMAND_MOVE_WITHONOFF, "MoveWithOnOff", false);
parameter = new ZclValue(ZclHelper.ENUMERATION_8_BIT_TYPE, "MoveMode");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "Rate");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// Step command (no response required)
command = new ZclCommand(this, COMMAND_STEP_WITHONOFF, "StepWithOnOff", false);
parameter = new ZclValue(ZclHelper.ENUMERATION_8_BIT_TYPE, "StepMode");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "StepSize");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// Stop command (no response required)
command = new ZclCommand(this, COMMAND_STOP_WITHONOFF, "StopWithOnOff", false);
m_commandList.Add(command.Id, command);
// call parent class "post constructor"
PostChildClassConstructor();
}
internal OnOffCluster(ZigBeeEndPoint endPoint, List <UInt16> supportedAttributes)
: base(endPoint)
{
// set cluster name and cluster Id
Name = CLUSTER_NAME;
m_Id = CLUSTER_ID;
// if supportedAttributes is null assume all attributes supported
bool supportAllAttributesBydefault = false;
if (supportedAttributes == null)
{
supportAllAttributesBydefault = true;
}
// OnOff attribute (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_ONOFF))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_ONOFF, "OnOff", ZclHelper.BOOLEAN_TYPE, true, false);
m_attributeList.Add(attrib.Id, attrib);
}
// IMPORTANT NOTE, parameters MUST be added in parameter list of each command
// in the order specified in ZCL standard
// Off command (no response required)
var command = new ZclCommand(this, COMMAND_OFF, "Off", false);
m_commandList.Add(command.Id, command);
// On command (no response required)
command = new ZclCommand(this, COMMAND_ON, "On", false);
m_commandList.Add(command.Id, command);
// Toggle command (no response required)
command = new ZclCommand(this, COMMAND_TOGGLE, "Toggle", false);
m_commandList.Add(command.Id, command);
// add ZLL profile specific attributes and commands
bool areZllAttributesSupported = false;
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_GLOBALSCENECONTROL_ZLL))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_GLOBALSCENECONTROL_ZLL, "GlobalSceneControl", ZclHelper.BOOLEAN_TYPE, true, false);
m_attributeList.Add(attrib.Id, attrib);
areZllAttributesSupported = true;
}
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_ONTIME_ZLL))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_ONTIME_ZLL, "OnTime", ZclHelper.UINT16_TYPE, true, false);
m_attributeList.Add(attrib.Id, attrib);
areZllAttributesSupported = true;
}
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_OFFWAITTIME_ZLL))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_OFFWAITTIME_ZLL, "OnWaitTime", ZclHelper.UINT16_TYPE, true, false);
m_attributeList.Add(attrib.Id, attrib);
areZllAttributesSupported = true;
}
// add ZLL command if ZLL attributes are supported
if (areZllAttributesSupported)
{
command = new ZclCommand(this, COMMAND_OFFWITHEFFECT_ZLL, "OffWithEffect", false);
var parameter = new ZclValue(ZclHelper.UINT8_TYPE, "EffectIdentifier");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "EffectVariant");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
command = new ZclCommand(this, COMMAND_ONWITHRECALLGLOBALSCENE_ZLL, "OnWithRecallGlobalScene", false);
m_commandList.Add(command.Id, command);
command = new ZclCommand(this, COMMAND_ONWITHTIMEOFF_ZLL, "OnWithTimeOff", false);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "OnOffControl");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "OnTime");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "OffWaitTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
}
// call parent class "post constructor"
PostChildClassConstructor();
}
internal ColorControlCluster(ZigBeeEndPoint endPoint, List <UInt16> supportedAttributes)
: base(endPoint)
{
// set cluster name and cluster Id
Name = CLUSTER_NAME;
m_Id = CLUSTER_ID;
// if supportedAttributes is null assume all attributes supported
bool supportAllAttributesBydefault = false;
if (supportedAttributes == null)
{
supportAllAttributesBydefault = true;
}
// current hue attribute (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_CURRENTHUE))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_CURRENTHUE, "CurrentHue", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// current saturation (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_CURRENTSATURATION))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_CURRENTSATURATION, "CurrentSaturation", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// remaining time (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_REMAININGTIME))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_REMAININGTIME, "RemainingTime", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// current X (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_CURRENTX))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_CURRENTX, "CurrentX", ZclHelper.UINT16_TYPE, true, false);
m_attributeList.Add(attrib.Id, attrib);
}
// current Y (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_CURRENTY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_CURRENTY, "CurrentY", ZclHelper.UINT16_TYPE, true, false);
m_attributeList.Add(attrib.Id, attrib);
}
// drift compensation (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_DRIFTCOMPENSATION))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_DRIFTCOMPENSATION, "DriftCompensation", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// compensation text (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COMPENSATIONTEXT))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COMPENSATIONTEXT, "CompensationText", ZclHelper.CHAR_STRING_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color temperature (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORTEMPERATURE))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORTEMPERATURE, "ColorTemperature", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color mode (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORMODE))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORMODE, "ColorMode", ZclHelper.ENUMERATION_8_BIT_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// number of primaries (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_NUMBEROFPRIMARIES))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_NUMBEROFPRIMARIES, "NumberOfPrimaries", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 1 X (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY1X))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY1X, "Primary1X", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 1 Y (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY1Y))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY1Y, "Primary1Y", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 1 intensity (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY1INTENSITY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY1INTENSITY, "Primary1Intensity", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 2 X (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY2X))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY2X, "Primary2X", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 2 Y (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY2Y))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY2Y, "Primary2Y", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 2 intensity (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY2INTENSITY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY2INTENSITY, "Primary2Intensity", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 3 X (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY3X))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY3X, "Primary3X", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 3 Y (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY3Y))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY3Y, "Primary3Y", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 3 intensity (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY3INTENSITY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY3INTENSITY, "Primary3Intensity", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 4 X (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY4X))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY4X, "Primary4X", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 4 Y (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY4Y))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY4Y, "Primary4Y", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 4 intensity (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY4INTENSITY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY4INTENSITY, "Primary4Intensity", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 5 X (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY5X))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY5X, "Primary5X", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 5 Y (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY5Y))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY5Y, "Primary5Y", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 5 intensity (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY5INTENSITY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY5INTENSITY, "Primary5Intensity", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 6 X (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY6X))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY6X, "Primary6X", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 6 Y (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY6Y))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY6Y, "Primary6Y", ZclHelper.UINT16_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// primary 6 intensity (read only)
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_PRIMARY6INTENSITY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_PRIMARY6INTENSITY, "Primary6Intensity", ZclHelper.UINT8_TYPE, true, true);
m_attributeList.Add(attrib.Id, attrib);
}
// white point X
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_WHITEPOINTX))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_WHITEPOINTX, "WhitePointX", ZclHelper.UINT16_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// white point Y
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_WHITEPOINTY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_WHITEPOINTY, "WhitePointY", ZclHelper.UINT16_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color point R X
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORPOINTRX))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORPOINTRX, "ColorPointRX", ZclHelper.UINT16_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color point R Y
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORPOINTRY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORPOINTRY, "ColorPointRY", ZclHelper.UINT16_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color point R intensity
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORPOINTRINTENSITY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORPOINTRINTENSITY, "ColorPointRIntensity", ZclHelper.UINT8_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color point G X
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORPOINTGX))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORPOINTGX, "ColorPointGX", ZclHelper.UINT16_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color point G Y
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORPOINTGY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORPOINTGY, "ColorPointGY", ZclHelper.UINT16_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color point G intensity
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORPOINTGINTENSITY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORPOINTGINTENSITY, "ColorPointGIntensity", ZclHelper.UINT8_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color point B X
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORPOINTBX))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORPOINTBX, "ColorPointBX", ZclHelper.UINT16_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color point B Y
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORPOINTBY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORPOINTBY, "ColorPointBY", ZclHelper.UINT16_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// color point B intensity
if (supportAllAttributesBydefault ||
supportedAttributes.Contains(ATTRIBUTE_COLORPOINTBINTENSITY))
{
var attrib = new ZclAttribute(this, ATTRIBUTE_COLORPOINTBINTENSITY, "ColorPointBIntensity", ZclHelper.UINT8_TYPE, false, true);
m_attributeList.Add(attrib.Id, attrib);
}
// move to hue command
var command = new ZclCommand(this, COMMAND_MOVETOHUE, "MoveToHue", false);
var parameter = new ZclValue(ZclHelper.UINT8_TYPE, "Hue");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.ENUMERATION_8_BIT_TYPE, "Direction");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// move hue command
command = new ZclCommand(this, COMMAND_MOVEHUE, "MoveHue", false);
parameter = new ZclValue(ZclHelper.ENUMERATION_8_BIT_TYPE, "MoveMode");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "Rate");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// step hue command
command = new ZclCommand(this, COMMAND_STEPHUE, "StepHue", false);
parameter = new ZclValue(ZclHelper.ENUMERATION_8_BIT_TYPE, "StepMode");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "StepSize");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// move to saturation command
command = new ZclCommand(this, COMMAND_MOVETOSATURATION, "MoveToSaturation", false);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "Saturation");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// move saturation command
command = new ZclCommand(this, COMMAND_MOVESATURATION, "MoveSaturation", false);
parameter = new ZclValue(ZclHelper.ENUMERATION_8_BIT_TYPE, "MoveMode");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "Rate");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// step saturation command
command = new ZclCommand(this, COMMAND_STEPSATURATION, "StepSaturation", false);
parameter = new ZclValue(ZclHelper.ENUMERATION_8_BIT_TYPE, "StepMode");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "StepSize");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// move hue and saturation command
command = new ZclCommand(this, COMMAND_MOVETOHUEANDSATURATION, "MoveHueAndSaturation", false);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "Hue");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT8_TYPE, "Saturation");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// move to color command
command = new ZclCommand(this, COMMAND_MOVETOCOLOR, "MoveToColor", false);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "ColorX");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "ColorY");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// move color command
command = new ZclCommand(this, COMMAND_MOVECOLOR, "MoveColor", false);
parameter = new ZclValue(ZclHelper.INT16_TYPE, "RateX");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.INT16_TYPE, "RateY");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// step color command
command = new ZclCommand(this, COMMAND_STEPCOLOR, "StepColor", false);
parameter = new ZclValue(ZclHelper.INT16_TYPE, "StepX");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.INT16_TYPE, "StepY");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// move to color temperature command
command = new ZclCommand(this, COMMAND_MOVETOCOLORTEMPERATURE, "MoveToColorTemperature", false);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "ColorTemperature");
command.AddInParam(parameter);
parameter = new ZclValue(ZclHelper.UINT16_TYPE, "TransitionTime");
command.AddInParam(parameter);
m_commandList.Add(command.Id, command);
// call parent class "post constructor"
PostChildClassConstructor();
}