protected bool SendCommand(XBeeModule xbeeModule, ZigBeeDevice destination, ZigBeeEndPoint endPoint = null)
{
bool retVal = false;
// send ZigBee command then wait for response if required
m_destination = destination;
m_endPoint = endPoint;
if (m_responseRequired)
{
byte sequenceNumber = xbeeModule.SendZigBeeCommand(this);
retVal = m_responseParsedEv.WaitOne(AdapterHelper.MAX_WAIT_TIMEOUT);
if (!retVal)
{
// no response received in time
xbeeModule.RemovePendingZigBeeCmd(sequenceNumber);
}
}
else
{
xbeeModule.SendZigBeeCommandNoResponse(this);
retVal = true;
}
return(retVal);
}
public void GetNeighbors(XBeeModule xbeeModule, ZigBeeDevice device)
{
// clear list
m_neighborList.Clear();
// get 1st part of neighbor table
m_payload[0] = 0;
if (!SendCommand(xbeeModule, device))
{
m_neighborList.Clear();
return;
}
// get rest of neighbor table
// note that by Zigbee standard nb of entry in neighbor table can't exceed 1 byte
m_payload[0] = Convert.ToByte(m_neighborList.Count);
while (m_neighborList.Count < m_nbOfNeighbors)
{
if (!SendCommand(xbeeModule, device))
{
m_neighborList.Clear();
return;
}
}
}
public void SendNoWaitResponse(XBeeModule xbeeModule, bool sendLocal = true)
{
if (sendLocal)
{
xbeeModule.SendATCmdLocalNoResponse(this);
}
else
{
// not yet implemented
}
}
public bool GetListOfAttributeIds(XBeeModule xbeeModule, ZigBeeDevice device, ZigBeeEndPoint endPoint, UInt16 clusterId, out List <UInt16> attributeIdList)
{
m_status = ZclHelper.ZCL_ERROR_SUCCESS;
// reset list of attribute Ids
attributeIdList = null;
m_attributeIdList.Clear();
m_discoveryCompleted = false;
// set cluster Id
m_clusterId = clusterId;
m_responseClusterId = clusterId;
// add header and ZCL payload to command payload
while (!m_discoveryCompleted)
{
m_payload = new byte[m_zclHeader.Length + m_zclPayload.Length];
Array.Copy(m_zclHeader, m_payload, m_zclHeader.Length);
// update start Id in Zcl payload if necessary
if (m_attributeIdList.Count != 0)
{
UInt16 lastId = m_attributeIdList.Last();
lastId++;
byte[] newStartId = AdapterHelper.ToZigBeeFrame(lastId);
Array.Copy(newStartId, 0, m_zclPayload, 0, newStartId.Length);
}
Array.Copy(m_zclPayload, 0, m_payload, m_zclHeader.Length, m_zclPayload.Length);
// send command
if (!SendCommand(xbeeModule, device, endPoint) ||
m_status != ZclHelper.ZCL_ERROR_SUCCESS)
{
return(false);
}
}
// set out value
attributeIdList = m_attributeIdList;
return(true);
}
public bool SendAndWaitResponse(XBeeModule xbeeModule, bool sendLocal = true)
{
if (sendLocal)
{
byte commandId = xbeeModule.SendATCmdLocal(this);
if (!m_responseParsedEv.WaitOne(AdapterHelper.MAX_WAIT_TIMEOUT))
{
xbeeModule.RemovePendingATCmd(commandId);
return(false);
}
else
{
return(true);
}
}
else
{
// not yet implemented
return(false);
}
}
public void GetEndPoints(XBeeModule xbeeModule, ZigBeeDevice device)
{
// sanity check
if (null == device)
{
return;
}
// reset end point list
m_endPointList.Clear();
// set payload
m_payload = AdapterHelper.ToZigBeeFrame(device.NetworkAddress);
// send command
if (!SendCommand(xbeeModule, device))
{
loggingServices.WriteLine <ActiveEndPoints>("[" + device.MacAddress + "] Failed to get endPoints");
m_endPointList.Clear();
return;
}
}
public void GetDescriptor(XBeeModule xbeeModule, ZigBeeDevice device, byte endPointId)
{
// sanity check
if (null == device)
{
return;
}
// reset (in case descriptor has already been set by previous GetDescriptor call)
Reset();
// set payload
// (network address of device then end point Id)
byte[] tempBytes = AdapterHelper.ToZigBeeFrame(device.NetworkAddress);
Array.Copy(tempBytes, m_payload, tempBytes.Length);
m_payload[tempBytes.Length] = endPointId;
// send command
if (!SendCommand(xbeeModule, device))
{
Reset();
}
}
public bool SetRxIndicatorMode(XBeeModule xbeeCommand)
{
m_payload = EXPLICIT_RX_INDICATOR;
return(SendAndWaitResponse(xbeeCommand));
}
public bool SetDefaultApiMode(XBeeModule xbeeCommand)
{
m_payload = DEFAULT_API_MODE;
return(SendAndWaitResponse(xbeeCommand));
}