Inheritance: GrovePiSensor
Beispiel #1
0
        public static void CreateThings(Transport trans, Node node)
        {
            #region READ CONFIGURATION

            var SavedThingsConfig = ReadConfig();
            if (SavedThingsConfig == null)
            {
                DebugEx.Assert("Could not retrieve or create config; startup failed");
                return;
            }

            //use pin configuration from saved conf file
            var buzzerPin      = SavedThingsConfig[typeof(Buzzer)].Pin;
            var rgbLedPin      = SavedThingsConfig[typeof(RgbLed)].Pin;
            var soundSensorPin = SavedThingsConfig[typeof(SoundSensor)].Pin;
            var lightSensorPin = SavedThingsConfig[typeof(LightSensor)].Pin;
            var buttonPin      = SavedThingsConfig[typeof(Button)].Pin;
            var rotaryAnglePin = SavedThingsConfig[typeof(RotaryAngleSensor)].Pin;
            var relayPin       = SavedThingsConfig[typeof(Relay)].Pin;
            var htSensorPin    = SavedThingsConfig[typeof(TempAndHumidity)].Pin;
            var ultrasonicPin  = SavedThingsConfig[typeof(UltraSonicRanger)].Pin;
            var lcdPin         = SavedThingsConfig[typeof(LCD)].Pin;

            //use sampling period configuration from saved conf file
            var gpio_Sampling       = SavedThingsConfig[typeof(GPIO)].Period;
            var soundSensorSampling = SavedThingsConfig[typeof(SoundSensor)].Period;
            var lightSensorSampling = SavedThingsConfig[typeof(LightSensor)].Period;
            var buttonSampling      = SavedThingsConfig[typeof(Button)].Period;
            var rotaryAngleSampling = SavedThingsConfig[typeof(RotaryAngleSensor)].Period;
            var relaySampling       = SavedThingsConfig[typeof(Relay)].Period;
            var htSensorSampling    = SavedThingsConfig[typeof(TempAndHumidity)].Period;
            var ultrasonicSampling  = SavedThingsConfig[typeof(UltraSonicRanger)].Period;

            #endregion


            #region CREATE SENSORS

            /* A2MCU */
            GPIO GPIO_2 = new GPIO(Pin.DigitalPin2, trans, gpio_Sampling);
            GPIO GPIO_3 = new GPIO(Pin.DigitalPin3, trans, gpio_Sampling);
            GPIO GPIO_4 = new GPIO(Pin.DigitalPin4, trans, gpio_Sampling);
            GPIO GPIO_5 = new GPIO(Pin.DigitalPin5, trans, gpio_Sampling);
            GPIO GPIO_6 = new GPIO(Pin.DigitalPin6, trans, gpio_Sampling);
            /* /A2MCU */

            Buzzer            buzzer            = new Buzzer(GrovePiSensor.PinNameToPin[buzzerPin], trans);
            RgbLed            rgbled            = new RgbLed(GrovePiSensor.PinNameToPin[rgbLedPin], trans);
            SoundSensor       soundSensor       = new SoundSensor(GrovePiSensor.PinNameToPin[soundSensorPin], trans, soundSensorSampling);
            LightSensor       lightSensor       = new LightSensor(GrovePiSensor.PinNameToPin[lightSensorPin], trans, lightSensorSampling);
            Button            button            = new Button(GrovePiSensor.PinNameToPin[buttonPin], trans, buttonSampling);
            RotaryAngleSensor rotaryAngleSensor = new RotaryAngleSensor(GrovePiSensor.PinNameToPin[rotaryAnglePin], trans, rotaryAngleSampling);
            Relay             relaySensor       = new Relay(GrovePiSensor.PinNameToPin[relayPin], trans, relaySampling);
            TempAndHumidity   htSensor          = new TempAndHumidity(GrovePiSensor.PinNameToPin[htSensorPin], trans, htSensorSampling);
            UltraSonicRanger  ultrasonicSensor  = new UltraSonicRanger(GrovePiSensor.PinNameToPin[ultrasonicPin], trans, ultrasonicSampling);
            LCD lcd = new LCD(GrovePiSensor.PinNameToPin[lcdPin], trans);

            #endregion


            #region SETUP THINGS

            #region Setup A2MCU GPIO things

            List <Thing> gpio_things = new List <Thing>();
            for (int i = 2; i <= 6; i++)
            {
                //var pinConfig = new ConfigParameter() { Name = "Pin", Value = buzzerPin };
                var samplePeriodConfig = new ConfigParameter()
                {
                    Name = "SamplePeriod", Value = gpio_Sampling.ToStringInvariant()
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "gpio_thing" + i),
                    Type     = ThingTypeLibrary.Gpio.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name     = "GPIO_" + i,
                    Config   = new List <ConfigParameter>()
                    {
                        samplePeriodConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/Generic/gpio.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Input,
                        Name        = "GPO",
                        PortModelId = ModelTypeLibrary.GpioModel_Id,
                        State       = "false",
                        Type        = Yodiwo.API.Plegma.ePortType.Boolean,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "GPO")
                    },
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name        = "GPI",
                        State       = "false",
                        PortModelId = ModelTypeLibrary.GpioModel_Id,
                        Type        = Yodiwo.API.Plegma.ePortType.Boolean,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "GPI")
                    }
                };
                thing = node.AddThing(thing);
                gpio_things.Add(thing);
                Things.Add(thing);
            }

            //gpio thing --> gpio sensor class
            GPIOs.Add(gpio_things.ElementAt(0), GPIO_2);
            GPIOs.Add(gpio_things.ElementAt(1), GPIO_3);
            GPIOs.Add(gpio_things.ElementAt(2), GPIO_4);
            GPIOs.Add(gpio_things.ElementAt(3), GPIO_5);
            GPIOs.Add(gpio_things.ElementAt(4), GPIO_6);

            //gpio thing --> generic sensor class
            Lookup.Add(gpio_things.ElementAt(0), GPIO_2);
            Lookup.Add(gpio_things.ElementAt(1), GPIO_3);
            Lookup.Add(gpio_things.ElementAt(2), GPIO_4);
            Lookup.Add(gpio_things.ElementAt(3), GPIO_5);
            Lookup.Add(gpio_things.ElementAt(4), GPIO_6);

            gpio_things.Clear();

            #endregion

            //setup Buzzer  thing
            #region Setup Buzzer thing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = buzzerPin
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "buzzerthing"),
                    Type     = ThingTypeLibrary.Buzzer.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name     = "Buzzer",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/buzzer.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Input,
                        Name        = "BuzzerState",
                        State       = "false",
                        PortModelId = ModelTypeLibrary.BuzzerModel_Id,
                        Type        = Yodiwo.API.Plegma.ePortType.Decimal,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                BuzzerThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup RgbLed thing
            #region SetUp RgbLedThing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = rgbLedPin
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "RgbLedThing"),
                    Type     = ThingTypeLibrary.Lights.Type + PlegmaAPI.ThingModelTypeSeparator + ThingTypeLibrary.Lights_BooleanModelType,
                    Name     = "RgbLed",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/Generic/thing-genericlight.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Input,
                        Name        = "RgbLedState",
                        State       = "false",
                        PortModelId = ModelTypeLibrary.OnOffLightModel_Id,
                        Type        = Yodiwo.API.Plegma.ePortType.Boolean,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                RgbLedThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup SoundSensorThing
            #region SetUp SoundSensorThing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = soundSensorPin
                };
                var samplePeriodConfig = new ConfigParameter()
                {
                    Name = "SamplePeriod", Value = soundSensorSampling.ToStringInvariant()
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "SoundSensorThing"),
                    Type     = ThingTypeLibrary.SoundSensor.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name     = "SoundSensor",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig, samplePeriodConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/sound.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name        = "Value",
                        State       = "0",
                        PortModelId = ModelTypeLibrary.SoundSensorModel_Id,
                        Type        = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                SoundSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup Light Sensor thing
            #region SetUp LightSensorThing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = lightSensorPin
                };
                var samplePeriodConfig = new ConfigParameter()
                {
                    Name = "SamplePeriod", Value = lightSensorSampling.ToStringInvariant()
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "LightSensorThing"),
                    Type     = ThingTypeLibrary.LightSensor.Type + PlegmaAPI.ThingModelTypeSeparator + ThingTypeLibrary.LightSensor_NonNormalizedModelType,
                    Name     = "LightSensor",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig, samplePeriodConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/light.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name        = "Lumens",
                        State       = "0",
                        PortModelId = ModelTypeLibrary.Brightness_Id,
                        Type        = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                LightSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup Button thing
            #region SetUp ButtonThing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = buttonPin
                };
                var samplePeriodConfig = new ConfigParameter()
                {
                    Name = "SamplePeriod", Value = buttonSampling.ToStringInvariant()
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "ButtonSensorThing"),
                    Type     = ThingTypeLibrary.Button.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name     = "Button",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig, samplePeriodConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/Generic/thing-genericbutton.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name        = "ButtonState",
                        State       = "0",
                        PortModelId = ModelTypeLibrary.ButtonModel_OnOffActuatorId,
                        Type        = Yodiwo.API.Plegma.ePortType.Boolean,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                ButtonSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup RotaryAngle Sensor thing
            #region SetUp RotaryAngleSensorThing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = rotaryAnglePin
                };
                var samplePeriodConfig = new ConfigParameter()
                {
                    Name = "SamplePeriod", Value = rotaryAngleSampling.ToStringInvariant()
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "RotaryAngleSensorThing"),
                    Type     = ThingTypeLibrary.Slider.Type + PlegmaAPI.ThingModelTypeSeparatorStr,
                    Name     = "Rotary Angle Sensor",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig, samplePeriodConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/Generic/thing-slider.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name        = "RotaryAngle",
                        State       = "0",
                        PortModelId = ModelTypeLibrary.SliderModel_Id,
                        Type        = Yodiwo.API.Plegma.ePortType.Decimal,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                RotaryAngleSensorThing = thing = node.AddThing(thing);
            }
            #endregion

#if false
            //setup Relay thing
            #region SetUp RelayThing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = relayPin
                };
                var samplePeriodConfig = new ConfigParameter()
                {
                    Name = "SamplePeriod", Value = relaySampling.ToStringInvariant()
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "RelaySensorThing"),
                    Type     = ThingTypeLibrary.SwitchActuator.Type + PlegmaAPI.ThingModelTypeSeparator + ThingTypeLibrary.SwitchActuator_RelayModelType,
                    Name     = "Relay",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig, samplePeriodConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/relay.jpg",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name        = "RelayState",
                        PortModelId = ModelTypeLibrary.RelayModel_RelayId,
                        State       = "0",
                        Type        = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                RelaySensorThing = thing = node.AddThing(thing);
            }
            #endregion
#endif
            //setup Temperature and Humidity Sensor thing
            #region SetUp HTSensorThing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = htSensorPin
                };
                var samplePeriodConfig = new ConfigParameter()
                {
                    Name = "SamplePeriod", Value = htSensorSampling.ToStringInvariant()
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "HTSensorThing"),
                    Type     = ThingTypeLibrary.HTSensor.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name     = "Temperature and Humidity Sensor",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig, samplePeriodConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/ht.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        PortModelId = ModelTypeLibrary.HTSensorModel_TemperatureSensorId,
                        Name        = "HT",
                        State       = "0",
                        Type        = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                HTSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup UltraSonic Sensor thing
            #region SetUp UltrasonicThing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = ultrasonicPin
                };
                var samplePeriodConfig = new ConfigParameter()
                {
                    Name = "SamplePeriod", Value = ultrasonicSampling.ToStringInvariant()
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "UltrasonicSensorThing"),
                    Type     = ThingTypeLibrary.ProximitySensor.Type + PlegmaAPI.ThingModelTypeSeparator + ThingTypeLibrary.ProximitySensor_UltrasonicModelType,
                    Name     = "Ultrasonic Sensor",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig, samplePeriodConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/proximity.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name        = "cm",
                        State       = "0",
                        PortModelId = ModelTypeLibrary.UltrasonicSensorModel_Id,
                        Type        = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                UltrasonicSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup LCD Sensor thing
            #region SetUp LCDThing
            {
                var pinConfig = new ConfigParameter()
                {
                    Name = "Pin", Value = lcdPin
                };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "LCDThing"),
                    Type     = ThingTypeLibrary.Lcd.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name     = "LCD",
                    Config   = new List <ConfigParameter>()
                    {
                        pinConfig
                    },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/lcd.png",
                    },
                };
                thing.Ports = new List <Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Input,
                        Name        = "Message",
                        State       = "0",
                        PortModelId = ModelTypeLibrary.LcdModel_Id,
                        Type        = Yodiwo.API.Plegma.ePortType.String,
                        PortKey     = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                LCDThing = thing = node.AddThing(thing);
            }
            #endregion

            #endregion


            #region LUT CRETION

            Things.Add(BuzzerThing);
            Things.Add(RgbLedThing);
            Things.Add(SoundSensorThing);
            Things.Add(LightSensorThing);
            Things.Add(ButtonSensorThing);
            Things.Add(RotaryAngleSensorThing);
            //Things.Add(RelaySensorThing);
            Things.Add(HTSensorThing);
            Things.Add(UltrasonicSensorThing);
            Things.Add(LCDThing);


            Lookup.Add(BuzzerThing, buzzer);
            Lookup.Add(RgbLedThing, rgbled);
            Lookup.Add(SoundSensorThing, soundSensor);
            Lookup.Add(LightSensorThing, lightSensor);
            Lookup.Add(ButtonSensorThing, button);
            Lookup.Add(RotaryAngleSensorThing, rotaryAngleSensor);
            //Lookup.Add(RelaySensorThing, relaySensor);
            Lookup.Add(HTSensorThing, htSensor);
            Lookup.Add(UltrasonicSensorThing, ultrasonicSensor);
            Lookup.Add(LCDThing, lcd);


            /*
             * GroveSensors.Add(BuzzerThing.Name, buzzer);
             * GroveSensors.Add(RgbLedThing.Name, rgbled);
             * GroveSensors.Add(SoundSensorThing.Name, soundSensor);
             * GroveSensors.Add(LightSensorThing.Name, lightSensor);
             * GroveSensors.Add(ButtonSensorThing.Name, button);
             * GroveSensors.Add(RotaryAngleSensorThing.Name, rotaryAngleSensor);
             * GroveSensors.Add(RelaySensorThing.Name, relaySensor);
             * GroveSensors.Add(HTSensorThing.Name, htSensor);
             * GroveSensors.Add(UltrasonicSensorThing.Name, ultrasonicSensor);
             * GroveSensors.Add(LCDThing.Name, lcd);
             */

            #endregion


            #region REGISTER EVENTS

            foreach (var gpio in GPIOs.Values)
            {
                gpio.OnGetContinuousDatacb += data => OnGetContinuousDatacb(gpio, data);
            }

            soundSensor.OnGetContinuousDatacb       += data => OnGetContinuousDatacb(soundSensor, data);
            lightSensor.OnGetContinuousDatacb       += data => OnGetContinuousDatacb(lightSensor, data);
            button.OnGetContinuousDatacb            += data => OnGetContinuousDatacb(button, data);
            rotaryAngleSensor.OnGetContinuousDatacb += data => OnGetContinuousDatacb(rotaryAngleSensor, data);
            relaySensor.OnGetContinuousDatacb       += data => OnGetContinuousDatacb(relaySensor, data);
            htSensor.OnGetContinuousDatacb          += data => OnGetContinuousDatacb(htSensor, data);
            ultrasonicSensor.OnGetContinuousDatacb  += data => OnGetContinuousDatacb(ultrasonicSensor, data);

            #endregion
        }
Beispiel #2
0
        public static void CreateThings(Transport trans, Node node)
        {
            #region READ CONFIGURATION

            var SavedThingsConfig = ReadConfig();
            if (SavedThingsConfig == null)
            {
                DebugEx.Assert("Could not retrieve or create config; startup failed");
                return;
            }

            //use pin configuration from saved conf file
            var buzzerPin = SavedThingsConfig[typeof(Buzzer)].Pin;
            var rgbLedPin = SavedThingsConfig[typeof(RgbLed)].Pin;
            var soundSensorPin = SavedThingsConfig[typeof(SoundSensor)].Pin;
            var lightSensorPin = SavedThingsConfig[typeof(LightSensor)].Pin;
            var buttonPin = SavedThingsConfig[typeof(Button)].Pin;
            var rotaryAnglePin = SavedThingsConfig[typeof(RotaryAngleSensor)].Pin;
            var relayPin = SavedThingsConfig[typeof(Relay)].Pin;
            var htSensorPin = SavedThingsConfig[typeof(TempAndHumidity)].Pin;
            var ultrasonicPin = SavedThingsConfig[typeof(UltraSonicRanger)].Pin;
            var lcdPin = SavedThingsConfig[typeof(LCD)].Pin;

            //use sampling period configuration from saved conf file
            var gpio_Sampling = SavedThingsConfig[typeof(GPIO)].Period;
            var soundSensorSampling = SavedThingsConfig[typeof(SoundSensor)].Period;
            var lightSensorSampling = SavedThingsConfig[typeof(LightSensor)].Period;
            var buttonSampling = SavedThingsConfig[typeof(Button)].Period;
            var rotaryAngleSampling = SavedThingsConfig[typeof(RotaryAngleSensor)].Period;
            var relaySampling = SavedThingsConfig[typeof(Relay)].Period;
            var htSensorSampling = SavedThingsConfig[typeof(TempAndHumidity)].Period;
            var ultrasonicSampling = SavedThingsConfig[typeof(UltraSonicRanger)].Period;

            #endregion


            #region CREATE SENSORS

            /* A2MCU */
            GPIO GPIO_2 = new GPIO(Pin.DigitalPin2, trans, gpio_Sampling);
            GPIO GPIO_3 = new GPIO(Pin.DigitalPin3, trans, gpio_Sampling);
            GPIO GPIO_4 = new GPIO(Pin.DigitalPin4, trans, gpio_Sampling);
            GPIO GPIO_5 = new GPIO(Pin.DigitalPin5, trans, gpio_Sampling);
            GPIO GPIO_6 = new GPIO(Pin.DigitalPin6, trans, gpio_Sampling);
            /* /A2MCU */

            Buzzer buzzer = new Buzzer(GrovePiSensor.PinNameToPin[buzzerPin], trans);
            RgbLed rgbled = new RgbLed(GrovePiSensor.PinNameToPin[rgbLedPin], trans);
            SoundSensor soundSensor = new SoundSensor(GrovePiSensor.PinNameToPin[soundSensorPin], trans, soundSensorSampling);
            LightSensor lightSensor = new LightSensor(GrovePiSensor.PinNameToPin[lightSensorPin], trans, lightSensorSampling);
            Button button = new Button(GrovePiSensor.PinNameToPin[buttonPin], trans, buttonSampling);
            RotaryAngleSensor rotaryAngleSensor = new RotaryAngleSensor(GrovePiSensor.PinNameToPin[rotaryAnglePin], trans, rotaryAngleSampling);
            Relay relaySensor = new Relay(GrovePiSensor.PinNameToPin[relayPin], trans, relaySampling);
            TempAndHumidity htSensor = new TempAndHumidity(GrovePiSensor.PinNameToPin[htSensorPin], trans, htSensorSampling);
            UltraSonicRanger ultrasonicSensor = new UltraSonicRanger(GrovePiSensor.PinNameToPin[ultrasonicPin], trans, ultrasonicSampling);
            LCD lcd = new LCD(GrovePiSensor.PinNameToPin[lcdPin], trans);

            #endregion


            #region SETUP THINGS

            #region Setup A2MCU GPIO things

            List<Thing> gpio_things = new List<Thing>();
            for (int i = 2; i <= 6; i++)
            {
                //var pinConfig = new ConfigParameter() { Name = "Pin", Value = buzzerPin };
                var samplePeriodConfig = new ConfigParameter() { Name = "SamplePeriod", Value = gpio_Sampling.ToStringInvariant() };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "gpio_thing" + i),
                    Type = ThingTypeLibrary.Gpio.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name = "GPIO_" + i,
                    Config = new List<ConfigParameter>() { samplePeriodConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/Generic/gpio.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Input,
                        Name = "GPO",
                        PortModelId = ModelTypeLibrary.GpioModel_Id,
                        State = "false",
                        Type = Yodiwo.API.Plegma.ePortType.Boolean,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "GPO")
                    },
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name = "GPI",
                        State = "false",
                        PortModelId = ModelTypeLibrary.GpioModel_Id,
                        Type = Yodiwo.API.Plegma.ePortType.Boolean,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "GPI")
                    }
                };
                thing = node.AddThing(thing);
                gpio_things.Add(thing);
                Things.Add(thing);
            }

            //gpio thing --> gpio sensor class
            GPIOs.Add(gpio_things.ElementAt(0), GPIO_2);
            GPIOs.Add(gpio_things.ElementAt(1), GPIO_3);
            GPIOs.Add(gpio_things.ElementAt(2), GPIO_4);
            GPIOs.Add(gpio_things.ElementAt(3), GPIO_5);
            GPIOs.Add(gpio_things.ElementAt(4), GPIO_6);

            //gpio thing --> generic sensor class
            Lookup.Add(gpio_things.ElementAt(0), GPIO_2);
            Lookup.Add(gpio_things.ElementAt(1), GPIO_3);
            Lookup.Add(gpio_things.ElementAt(2), GPIO_4);
            Lookup.Add(gpio_things.ElementAt(3), GPIO_5);
            Lookup.Add(gpio_things.ElementAt(4), GPIO_6);

            gpio_things.Clear();

            #endregion

            //setup Buzzer  thing
            #region Setup Buzzer thing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = buzzerPin };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "buzzerthing"),
                    Type = ThingTypeLibrary.Buzzer.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name = "Buzzer",
                    Config = new List<ConfigParameter>() { pinConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/buzzer.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Input,
                        Name = "BuzzerState",
                        State = "false",
                        PortModelId = ModelTypeLibrary.BuzzerModel_Id,
                        Type = Yodiwo.API.Plegma.ePortType.Decimal,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                BuzzerThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup RgbLed thing 
            #region SetUp RgbLedThing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = rgbLedPin };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "RgbLedThing"),
                    Type = ThingTypeLibrary.Lights.Type + PlegmaAPI.ThingModelTypeSeparator + ThingTypeLibrary.Lights_BooleanModelType,
                    Name = "RgbLed",
                    Config = new List<ConfigParameter>() { pinConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/Generic/thing-genericlight.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Input,
                        Name = "RgbLedState",
                        State = "false",
                        PortModelId = ModelTypeLibrary.OnOffLightModel_Id,
                        Type = Yodiwo.API.Plegma.ePortType.Boolean,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                RgbLedThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup SoundSensorThing 
            #region SetUp SoundSensorThing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = soundSensorPin };
                var samplePeriodConfig = new ConfigParameter() { Name = "SamplePeriod", Value = soundSensorSampling.ToStringInvariant() };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "SoundSensorThing"),
                    Type = ThingTypeLibrary.SoundSensor.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name = "SoundSensor",
                    Config = new List<ConfigParameter>() { pinConfig, samplePeriodConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/sound.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name = "Value",
                        State = "0",
                        PortModelId=ModelTypeLibrary.SoundSensorModel_Id,
                        Type = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                SoundSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup Light Sensor thing 
            #region SetUp LightSensorThing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = lightSensorPin };
                var samplePeriodConfig = new ConfigParameter() { Name = "SamplePeriod", Value = lightSensorSampling.ToStringInvariant() };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "LightSensorThing"),
                    Type = ThingTypeLibrary.LightSensor.Type + PlegmaAPI.ThingModelTypeSeparator + ThingTypeLibrary.LightSensor_NonNormalizedModelType,
                    Name = "LightSensor",
                    Config = new List<ConfigParameter>() { pinConfig, samplePeriodConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/light.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name = "Lumens",
                        State = "0",
                        PortModelId = ModelTypeLibrary.Brightness_Id,
                        Type = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                LightSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup Button thing 
            #region SetUp ButtonThing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = buttonPin };
                var samplePeriodConfig = new ConfigParameter() { Name = "SamplePeriod", Value = buttonSampling.ToStringInvariant() };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "ButtonSensorThing"),
                    Type = ThingTypeLibrary.Button.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name = "Button",
                    Config = new List<ConfigParameter>() { pinConfig, samplePeriodConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/Generic/thing-genericbutton.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name = "ButtonState",
                        State = "0",
                        PortModelId= ModelTypeLibrary.ButtonModel_OnOffActuatorId,
                        Type = Yodiwo.API.Plegma.ePortType.Boolean,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                ButtonSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup RotaryAngle Sensor thing 
            #region SetUp RotaryAngleSensorThing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = rotaryAnglePin };
                var samplePeriodConfig = new ConfigParameter() { Name = "SamplePeriod", Value = rotaryAngleSampling.ToStringInvariant() };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "RotaryAngleSensorThing"),
                    Type = ThingTypeLibrary.Slider.Type + PlegmaAPI.ThingModelTypeSeparatorStr,
                    Name = "Rotary Angle Sensor",
                    Config = new List<ConfigParameter>() { pinConfig, samplePeriodConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/Generic/thing-slider.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name = "RotaryAngle",
                        State = "0",
                        PortModelId =ModelTypeLibrary.SliderModel_Id,
                        Type = Yodiwo.API.Plegma.ePortType.Decimal,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                RotaryAngleSensorThing = thing = node.AddThing(thing);
            }
            #endregion

#if false
            //setup Relay thing 
            #region SetUp RelayThing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = relayPin };
                var samplePeriodConfig = new ConfigParameter() { Name = "SamplePeriod", Value = relaySampling.ToStringInvariant() };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "RelaySensorThing"),
                    Type = ThingTypeLibrary.SwitchActuator.Type + PlegmaAPI.ThingModelTypeSeparator + ThingTypeLibrary.SwitchActuator_RelayModelType,
                    Name = "Relay",
                    Config = new List<ConfigParameter>() { pinConfig, samplePeriodConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/relay.jpg",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name = "RelayState",
                        PortModelId = ModelTypeLibrary.RelayModel_RelayId,
                        State = "0",
                        Type = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                RelaySensorThing = thing = node.AddThing(thing);
            }
            #endregion
#endif
            //setup Temperature and Humidity Sensor thing 
            #region SetUp HTSensorThing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = htSensorPin };
                var samplePeriodConfig = new ConfigParameter() { Name = "SamplePeriod", Value = htSensorSampling.ToStringInvariant() };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "HTSensorThing"),
                    Type = ThingTypeLibrary.HTSensor.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name = "Temperature and Humidity Sensor",
                    Config = new List<ConfigParameter>() { pinConfig, samplePeriodConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/ht.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        PortModelId = ModelTypeLibrary.HTSensorModel_TemperatureSensorId,
                        Name = "HT",
                        State = "0",
                        Type = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                HTSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup UltraSonic Sensor thing 
            #region SetUp UltrasonicThing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = ultrasonicPin };
                var samplePeriodConfig = new ConfigParameter() { Name = "SamplePeriod", Value = ultrasonicSampling.ToStringInvariant() };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "UltrasonicSensorThing"),
                    Type = ThingTypeLibrary.ProximitySensor.Type + PlegmaAPI.ThingModelTypeSeparator + ThingTypeLibrary.ProximitySensor_UltrasonicModelType,
                    Name = "Ultrasonic Sensor",
                    Config = new List<ConfigParameter>() { pinConfig, samplePeriodConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/proximity.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Output,
                        Name = "cm",
                        State = "0",
                        PortModelId = ModelTypeLibrary.UltrasonicSensorModel_Id,
                        Type = Yodiwo.API.Plegma.ePortType.Integer,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                UltrasonicSensorThing = thing = node.AddThing(thing);
            }
            #endregion

            //setup LCD Sensor thing 
            #region SetUp LCDThing
            {
                var pinConfig = new ConfigParameter() { Name = "Pin", Value = lcdPin };
                var thing = new Yodiwo.API.Plegma.Thing()
                {
                    ThingKey = ThingKey.BuildFromArbitraryString("$NodeKey$", "LCDThing"),
                    Type = ThingTypeLibrary.Lcd.Type + PlegmaAPI.ThingModelTypeSeparatorPlusDefault,
                    Name = "LCD",
                    Config = new List<ConfigParameter>() { pinConfig },
                    UIHints = new ThingUIHints()
                    {
                        IconURI = "/Content/img/icons/lcd.png",
                    },
                };
                thing.Ports = new List<Yodiwo.API.Plegma.Port>()
                {
                    new Yodiwo.API.Plegma.Port()
                    {
                        ioDirection = Yodiwo.API.Plegma.ioPortDirection.Input,
                        Name = "Message",
                        State = "0",
                        PortModelId= ModelTypeLibrary.LcdModel_Id,
                        Type = Yodiwo.API.Plegma.ePortType.String,
                        PortKey = PortKey.BuildFromArbitraryString("$ThingKey$", "0")
                    }
                };
                LCDThing = thing = node.AddThing(thing);
            }
            #endregion

            #endregion


            #region LUT CRETION

            Things.Add(BuzzerThing);
            Things.Add(RgbLedThing);
            Things.Add(SoundSensorThing);
            Things.Add(LightSensorThing);
            Things.Add(ButtonSensorThing);
            Things.Add(RotaryAngleSensorThing);
            //Things.Add(RelaySensorThing);
            Things.Add(HTSensorThing);
            Things.Add(UltrasonicSensorThing);
            Things.Add(LCDThing);


            Lookup.Add(BuzzerThing, buzzer);
            Lookup.Add(RgbLedThing, rgbled);
            Lookup.Add(SoundSensorThing, soundSensor);
            Lookup.Add(LightSensorThing, lightSensor);
            Lookup.Add(ButtonSensorThing, button);
            Lookup.Add(RotaryAngleSensorThing, rotaryAngleSensor);
            //Lookup.Add(RelaySensorThing, relaySensor);
            Lookup.Add(HTSensorThing, htSensor);
            Lookup.Add(UltrasonicSensorThing, ultrasonicSensor);
            Lookup.Add(LCDThing, lcd);


            /*
            GroveSensors.Add(BuzzerThing.Name, buzzer);
            GroveSensors.Add(RgbLedThing.Name, rgbled);
            GroveSensors.Add(SoundSensorThing.Name, soundSensor);
            GroveSensors.Add(LightSensorThing.Name, lightSensor);
            GroveSensors.Add(ButtonSensorThing.Name, button);
            GroveSensors.Add(RotaryAngleSensorThing.Name, rotaryAngleSensor);
            GroveSensors.Add(RelaySensorThing.Name, relaySensor);
            GroveSensors.Add(HTSensorThing.Name, htSensor);
            GroveSensors.Add(UltrasonicSensorThing.Name, ultrasonicSensor);
            GroveSensors.Add(LCDThing.Name, lcd);
            */

            #endregion


            #region REGISTER EVENTS

            foreach (var gpio in GPIOs.Values)
                gpio.OnGetContinuousDatacb += data => OnGetContinuousDatacb(gpio, data);

            soundSensor.OnGetContinuousDatacb += data => OnGetContinuousDatacb(soundSensor, data);
            lightSensor.OnGetContinuousDatacb += data => OnGetContinuousDatacb(lightSensor, data);
            button.OnGetContinuousDatacb += data => OnGetContinuousDatacb(button, data);
            rotaryAngleSensor.OnGetContinuousDatacb += data => OnGetContinuousDatacb(rotaryAngleSensor, data);
            relaySensor.OnGetContinuousDatacb += data => OnGetContinuousDatacb(relaySensor, data);
            htSensor.OnGetContinuousDatacb += data => OnGetContinuousDatacb(htSensor, data);
            ultrasonicSensor.OnGetContinuousDatacb += data => OnGetContinuousDatacb(ultrasonicSensor, data);

            #endregion
        }