/// <summary>
/// 更新模块状态缓存
/// </summary>
/// <param name="sensorData">模块数据</param>
private void updateCurModuleStateDic(SensorData sensorData)
{
ConcurrentDictionary <string, List <Param> > moduleDicCacheOk;
log = LogFactory.GetLogger(MethodBase.GetCurrentMethod().DeclaringType.FullName + ":" + MethodBase.GetCurrentMethod().Name);
var fault = sensorData.Fault;
//消除异常错误
//将数据按机台分组
//发来的数据是 机台 -----> 参数,而我的数据结构是 机台 ------->模块------>参数
//所以要遍历多次
var d = from s in sensorData.CollectedData group s by s.MachineID into t select t;
try {
//遍历机台
foreach (var realParamList in d)
{
//获取机台 Id
var machineId = realParamList.Key.Value;
//从缓存中找到机台
if (curModuleStateDic.TryGetValue(machineId, out moduleDicCacheOk))
{
//遍历实时参数
foreach (var realParam in realParamList)
{
//遍历缓存模块
foreach (var module in moduleDicCacheOk)
{
//遍历缓存参数
foreach (var param in module.Value)
{
// realParam.ParameterCodeID = 2;
//找到缓存中的参数对象
if (param.ParamCodeID == realParam.ParameterCodeID.ToString())
{
//参数正常，更新缓存值
param.FaultValue = "1";
break;
}
}
}
}
}
}
//添加异常错误
ConcurrentDictionary <string, List <Param> > moduleDicCacheError;
//有异常情况
if (fault != null)
{
var faultMachId = fault.MachineID;
//找该机台的出错到缓存
if (curModuleStateDic.TryGetValue(faultMachId.Value, out moduleDicCacheError))
{
//出错的模块
var faultSerialNum = fault.SerialNum;
List <Param> faultParamList;
//找到出错的模块
if (moduleDicCacheError.TryGetValue(faultSerialNum, out faultParamList))
{
var faultState = fault.State.Split('-');
//不满足出错格式则不做任何处理
if (faultState.Length != 3)
{
log.Debug("更新错误缓存的错误状态值长度出错 " + faultState.Length);
}
else
{
//取出出错的状态码
var faultCode = faultState[1];
var faultValue = faultState[2];
//遍历模块下面的参数
foreach (var faultParam in faultParamList)
{
//找到出错的参数
if (faultParam.ParamCode == faultCode)
{
//更新出错参数的错误值
faultParam.FaultValue = faultValue;
break;
}
}
log.Debug("更新错误缓存中没有该参数 " + faultCode);
}
}
else
{
log.Debug("更新错误缓存中没有该模块 " + faultSerialNum);
}
}
else
{
log.Debug("更新错误缓存中没有该机台 " + faultMachId);
}
}
} catch (Exception e) {
log.Error("更新错误状态失败", e);
}
}
private void TestUpdateSensorData(SensorData sensorData)
{
//将接受的数据封装成需要的数据
var retData = sensorDataBiz.GetSensorData(sensorData);
//按机台分组，即接受到的数据所包含的机台
var groupData = (from d in sensorData.CollectedData group d by d.MachineID into g select g);
//取出机台收到的参数
foreach (var data in groupData)
{
var machineId = data.Key.Value;
string curMeters = "";
string curAxisNum = "";
//更新字典缓存
updateDicCache(machineId, sensorData, out curMeters, out curAxisNum,
//轴号变动则通知前端浏览器清空数据
//相当于在线重新进行初始化数据
() => {
//TODO
});
VM_MachineProperty pty;
//获取到该机台的属性
if (curMachPtyDic.TryGetValue(machineId, out pty))
{
//更新参数
pty.CurrentMeters = curMeters;
pty.AxisNum = curAxisNum;
//最大最小线径
try {
var maxOd = (from d in data where d.ParameterCodeID == (int)SPEC_PARAM_CODE.OUTTER_OD select d).Max(d => decimal.Parse(d.CollectedValue));
var minOd = (from d in data where d.ParameterCodeID == (int)SPEC_PARAM_CODE.OUTTER_OD select d).Min(d => decimal.Parse(d.CollectedValue));
if (pty.ODMax.Value < maxOd)
{
pty.ODMax = maxOd;
}
if (pty.ODMin > minOd)
{
pty.ODMin = minOd;
}
} catch {
}
}
//拥有相同机台的前端连接
var sameMachConnectionIds = new List <string>();
if (clientsDic.TryGetValue(machineId, out sameMachConnectionIds))
{
//挨个推送机台的实时数据
ConcurrentDictionary <string, List <Param> > moduleStateTab;
curModuleStateDic.TryGetValue(machineId, out moduleStateTab);
foreach (var conenctionId in sameMachConnectionIds)
{
//更新曲线参数
context.Clients.Client(conenctionId).
updateSensorData(
//数据
retData,
//当前米数
curMeters,
//该机台的错误表
moduleStateTab);
//更新机台属性
context.Clients.Client(conenctionId).updateMachinePty(pty);
}
}
}
}
public void UpdateSensorData(DataDisplay.StructData dpData)
{
var sensorData = new SensorData();
List <T_CollectedDataParameters> colData = new List <T_CollectedDataParameters>();
List <T_CodeUsing> code = new List <T_CodeUsing>();
try {
if (!string.IsNullOrEmpty(dpData.datamain))
{
dpData.datamain = dpData.datamain.Replace(":abc123", ":\"\"").Replace("\"abc123\"", "\"\"");
code = JsonConvert.DeserializeObject <List <T_CodeUsing> >(dpData.datamain);
}
if (!string.IsNullOrEmpty(dpData.datadetail))
{
dpData.datadetail = dpData.datadetail.Replace(":abc123", ":\"\"").Replace("\"abc123\"", "\"\"");
colData = JsonConvert.DeserializeObject <List <T_CollectedDataParameters> >(dpData.datadetail);
}
if (!string.IsNullOrEmpty(dpData.faultdata))
{
sensorData.Fault = JsonConvert.DeserializeObject <T_FaultModule>(dpData.faultdata);
}
sensorData.CodeUsing = code;
sensorData.CollectedData = colData;
updateCurModuleStateDic(sensorData);
} catch (Exception e) {
Debug.Write(e.ToString());
return;
}
mapParamCode(sensorData);
#region 来自于中心服务器测试数据
////++testMeters;
//Random random = new Random();
//timer = new Timer(testTimerHub,null,random.Next(1000,5000),0);
//List<T_CollectedDataParameters> colData = new List<T_CollectedDataParameters> {
// //现场温度
// new T_CollectedDataParameters {
// CollectedTime =DateTime.UtcNow,
// CollectedValue = random.Next(-20,100).ToString(),
// ParameterCodeID = 3,
// MachineID = 22
// },
// //六段温度
// new T_CollectedDataParameters {
// CollectedTime = DateTime.Now.AddMilliseconds(500),
// CollectedValue = random.Next(1,3).ToString(),
// ParameterCodeID = (int) SPEC_PARAM_CODE.INNER_OD,
// MachineID = 22
// },
// new T_CollectedDataParameters {
// CollectedTime = DateTime.Now.AddMilliseconds(500),
// CollectedValue = random.Next(2,5).ToString(),
// ParameterCodeID = (int)SPEC_PARAM_CODE.OUTTER_OD,
// MachineID = 22
// },
// new T_CollectedDataParameters {
// CollectedTime = DateTime.Now.AddMilliseconds(500),
// CollectedValue = random.Next(-20,100).ToString(),
// ParameterCodeID = 16,
// MachineID = 22
// },
// new T_CollectedDataParameters {
// CollectedTime = DateTime.Now.AddMilliseconds(500),
// CollectedValue = random.Next(-20,100).ToString(),
// ParameterCodeID = 18,
// MachineID = 22
// },
// new T_CollectedDataParameters {
// CollectedTime = DateTime.Now.AddMilliseconds(500),
// CollectedValue = random.Next(-20,100).ToString(),
// ParameterCodeID = 20,
// MachineID = 22
// },
// new T_CollectedDataParameters {
// CollectedTime = DateTime.Now.AddMilliseconds(500),
// CollectedValue = random.Next(-20,100).ToString(),
// ParameterCodeID = 22,
// MachineID = 22
// },};
////收到米数
//if(testMetersTrigger % 5 == 0) {
// ++testMeters;
// //colData.Add(new T_CollectedDataParameters {
// // CollectedTime = DateTime.Now.AddMilliseconds(500),
// // CollectedValue = testMeters.ToString(),
// // ParameterCodeID = (int)SPEC_PARAM_CODE.METERS_COUNT,
// // MachineID = 22
// //});
//}
//List<T_CodeUsing> code = new List<T_CodeUsing>();
////模拟每100米更换一次轴号
//if(testMeters % 2 == 0) {
// //code.Add(new T_CodeUsing {
// // Axis_No = "CPXXtestxxxxyyy",
// // GeneratorTime = DateTime.Now,
// // MachineID = 22,
// // CodeNumber = "12456464650"
// //});
//}
//反序列化的数据
//sensorData.CodeUsing = code;
//sensorData.CollectedData = colData;
#endregion
//将接受的数据封装成需要的数据
var retData = sensorDataBiz.GetSensorData(sensorData);
//按机台分组，即接受到的数据所包含的机台
var groupData = (from d in sensorData.CollectedData group d by d.MachineID into g select g);
//取出机台收到的参数
foreach (var data in groupData)
{
var machineId = data.Key.Value;
string curMeters = "";
string curAxisNum = "";
//更新字典缓存
updateDicCache(machineId, sensorData, out curMeters, out curAxisNum,
//轴号变动则通知前端浏览器清空数据
//相当于在线重新进行初始化数据
() => {
//TODO
});
VM_MachineProperty pty = new VM_MachineProperty();
//获取到该机台的属性
if (curMachPtyDic.TryGetValue(machineId, out pty))
{
//更新参数
pty.CurrentMeters = curMeters;
pty.AxisNum = curAxisNum;
//最大最小线径
try {
var maxOd = (from d in data where d.ParameterCodeID == (int)SPEC_PARAM_CODE.OUTTER_OD select d).Max(d => decimal.Parse(d.CollectedValue));
var minOd = (from d in data where d.ParameterCodeID == (int)SPEC_PARAM_CODE.OUTTER_OD select d).Min(d => decimal.Parse(d.CollectedValue));
if (pty.ODMax.Value < maxOd)
{
pty.ODMax = maxOd;
}
if (pty.ODMin > minOd)
{
pty.ODMin = minOd;
}
} catch (Exception e) {
}
}
//拥有相同机台的前端连接
var sameMachConnectionIds = new List <string>();
if (clientsDic.TryGetValue(machineId, out sameMachConnectionIds))
{
//挨个推送机台的实时数据
ConcurrentDictionary <string, List <Param> > moduleStateTab;
curModuleStateDic.TryGetValue(machineId, out moduleStateTab);
foreach (var conenctionId in sameMachConnectionIds)
{
//更新曲线参数
context.Clients.Client(conenctionId).
updateSensorData(
//数据
retData,
//当前米数
curMeters,
//该机台的错误表
moduleStateTab);
//更新机台属性
context.Clients.Client(conenctionId).updateMachinePty(pty);
}
}
}
}
public void testTimerHub(object state)
{
ins++;
var sensorData = new SensorData();
sensorData.CollectedData = new List <T_CollectedDataParameters>();
Random random = new Random();
foreach (var machineItem in curMachPtyDic)
{
//OD值
sensorData.CollectedData.Add(new T_CollectedDataParameters {
MachineID = machineItem.Key,
CollectedTime = DateTime.Now,
CollectedValue = (random.NextDouble() * 8 + 15).ToString(),
ParameterCodeID = 2
});
sensorData.CollectedData.Add(new T_CollectedDataParameters {
MachineID = machineItem.Key,
CollectedTime = DateTime.Now,
CollectedValue = (random.NextDouble() * 8 + 10).ToString(),
ParameterCodeID = 41
});
if (ins >= 5)
{
ins = 0;
//一段温度显示值
sensorData.CollectedData.Add(new T_CollectedDataParameters {
MachineID = machineItem.Key,
CollectedTime = DateTime.Now,
CollectedValue = (random.NextDouble() * 20 + 185).ToString(),
ParameterCodeID = 12
});
//二段温度显示值
sensorData.CollectedData.Add(new T_CollectedDataParameters {
MachineID = machineItem.Key,
CollectedTime = DateTime.Now,
CollectedValue = (random.NextDouble() * 20 + 185).ToString(),
ParameterCodeID = 14
});
//三段温度显示值
sensorData.CollectedData.Add(new T_CollectedDataParameters {
MachineID = machineItem.Key,
CollectedTime = DateTime.Now,
CollectedValue = (random.NextDouble() * 20 + 185).ToString(),
ParameterCodeID = 16
});
//四段温度显示值
sensorData.CollectedData.Add(new T_CollectedDataParameters {
MachineID = machineItem.Key,
CollectedTime = DateTime.Now,
CollectedValue = (random.NextDouble() * 20 + 185).ToString(),
ParameterCodeID = 18
});
}
}
sensorData.CodeUsing = new List <T_CodeUsing>();
TestUpdateSensorData(sensorData);
}
