// Added by Icyer 2006/12/15 // 检查产品 private Messages CheckProduct(object act, string runningCard) { // 查询产品信息 BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null; if ((act as IDCTClient).DBConnection != null) { domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; } else { domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider() as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; (act as IDCTClient).DBConnection = domainProvider; } ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider); /* Removed by Icyer 2007/03/16 * UserControl.Messages msgProduct = _helper.GetIDInfo( runningCard ) ; * ProductInfo product= (ProductInfo)msgProduct.GetData().Values[0]; * if (product == null || product.LastSimulation == null) * { * msgProduct.ClearMessages(); * msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation")); * return msgProduct; * } */ // Added by Icyer 2007/03/16 如果归属工单,则做归属工单检查,否则做序列号途程检查 UserControl.Messages msgProduct = _helper.GetIDInfo(runningCard); ProductInfo product = (ProductInfo)msgProduct.GetData().Values[0]; MO moWillGo = null; ActionGoToMO actionGoMO = new ActionGoToMO(domainProvider); Messages msgMo = actionGoMO.GetItemCodeFromGoMoRCard(((IDCTClient)act).ResourceCode, runningCard); if (msgMo.IsSuccess() == false) // 如果有错误,表示需要归属工单,但是解析工单或查询工单发生错误 { return(msgMo); } if (msgMo.GetData() != null) // 需要归属工单,做归属工单检查 { product.NowSimulation = new BenQGuru.eMES.Domain.DataCollect.Simulation(); UserControl.Message msgMoData = msgMo.GetData(); moWillGo = (MO)msgMoData.Values[0]; ActionGoToMO goToMO = new ActionGoToMO(domainProvider); GoToMOActionEventArgs MOActionEventArgs = new GoToMOActionEventArgs( ActionType.DataCollectAction_GoMO, runningCard, ((IDCTClient)act).LoginedUser, ((IDCTClient)act).ResourceCode, product, moWillGo.MOCode); msgMo = goToMO.CheckIn(MOActionEventArgs); if (!MOActionEventArgs.PassCheck) { msgMo = _helper.CheckID(new CKeypartsActionEventArgs( ActionType.DataCollectAction_CollectKeyParts, runningCard, ((IDCTClient)act).LoginedUser, ((IDCTClient)act).ResourceCode, product, null, null)); } } else // 不需要归属工单,检查序列号途程 { if (product == null || product.LastSimulation == null) { msgProduct.ClearMessages(); msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation")); return(msgProduct); } msgMo = _helper.CheckID(new CKeypartsActionEventArgs( ActionType.DataCollectAction_CollectKeyParts, runningCard, ((IDCTClient)act).LoginedUser, ((IDCTClient)act).ResourceCode, product, null, null)); } if (msgMo.IsSuccess() == false) { return(msgMo); } // Added end keypartsHT = new Hashtable(); keypartsHT.Add("ProdcutInfo", msgProduct); keypartsHT.Add("MOWillGo", moWillGo); IDCTClient client = act as IDCTClient; OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider); object[] objBomDetail = null; Messages messages1 = new Messages(); if (moWillGo == null) { // 检查途程 messages1 = _helper.CheckID( new CKeypartsActionEventArgs( ActionType.DataCollectAction_CollectKeyParts, product.LastSimulation.RunningCard, client.LoginedUser, client.ResourceCode, product, null, null)); } if (messages1.IsSuccess() == true) { objBomDetail = opBOMFacade.GetOPBOMDetails( product.NowSimulation.MOCode, product.NowSimulation.RouteCode, product.NowSimulation.OPCode); } else { return(messages1); } MOFacade moFacade = new MOFacade(domainProvider); //object mo = moFacade.GetMO( product.LastSimulation.MOCode ); object mo = moWillGo; if (moWillGo == null) { mo = moFacade.GetMO(product.LastSimulation.MOCode); } // 查询OPBOM OPBomKeyparts opBomKeyparts = new OPBomKeyparts(objBomDetail, Convert.ToInt32(((MO)mo).IDMergeRule), domainProvider); if (opBomKeyparts.Count == 0) { msgProduct.Add(new Message(MessageType.Error, "$CS_NOOPBomInfo $CS_Param_MOCode=" + product.NowSimulation.MOCode + " $CS_Param_RouteCode=" + product.NowSimulation.RouteCode + " $CS_Param_OPCode =" + product.NowSimulation.OPCode)); return(msgProduct); } else { this.OutMesssage = new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts " + (opBomKeyparts.GetbomKeypartCount() + 1).ToString() + "/" + opBomKeyparts.Count.ToString()); keypartsHT.Add("KeypartsInfo", opBomKeyparts); } return(msgProduct); }
// Added by Icyer 2006/12/15 // 检查产品 private Messages CheckProduct(object act, string runningCard) { // 查询产品信息 BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null; if ((act as IDCTClient).DBConnection != null) { domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; } else { domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider() as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; (act as IDCTClient).DBConnection = domainProvider; } try { //为改善性能 ((SQLDomainDataProvider)domainProvider).PersistBroker.AutoCloseConnection = false; ((SQLDomainDataProvider)domainProvider).PersistBroker.OpenConnection(); ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider); // Added by Icyer 2007/03/16 如果归属工单,则做归属工单检查,否则做序列号途程检查 UserControl.Messages msgProduct = _helper.GetIDInfo(runningCard); ProductInfo product = (ProductInfo)msgProduct.GetData().Values[0]; MO moWillGo = null; ActionGoToMO actionGoMO = new ActionGoToMO(domainProvider); Messages msgMo = actionGoMO.GetItemCodeFromGoMoRCard(((IDCTClient)act).ResourceCode, runningCard); if (msgMo.IsSuccess() == false) // 如果有错误,表示需要归属工单,但是解析工单或查询工单发生错误 { return(msgMo); } if (msgMo.GetData() != null) // 需要归属工单,做归属工单检查 { product.NowSimulation = new BenQGuru.eMES.Domain.DataCollect.Simulation(); UserControl.Message msgMoData = msgMo.GetData(); moWillGo = (MO)msgMoData.Values[0]; moCode = moWillGo.MOCode; ActionGoToMO goToMO = new ActionGoToMO(domainProvider); GoToMOActionEventArgs MOActionEventArgs = new GoToMOActionEventArgs( ActionType.DataCollectAction_GoMO, runningCard, ((IDCTClient)act).LoginedUser, ((IDCTClient)act).ResourceCode, product, moWillGo.MOCode); msgMo = goToMO.CheckIn(MOActionEventArgs); if (!MOActionEventArgs.PassCheck) { msgMo = _helper.CheckID(new CKeypartsActionEventArgs( ActionType.DataCollectAction_CollectINNO, runningCard, ((IDCTClient)act).LoginedUser, ((IDCTClient)act).ResourceCode, product, null, null)); } } else // 不需要归属工单,检查序列号途程 { if (product == null || product.LastSimulation == null) { msgProduct.ClearMessages(); msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation")); return(msgProduct); } msgMo = _helper.CheckID(new CKeypartsActionEventArgs( ActionType.DataCollectAction_CollectINNO, runningCard, ((IDCTClient)act).LoginedUser, ((IDCTClient)act).ResourceCode, product, null, null)); } if (msgMo.IsSuccess() == false) { return(msgMo); } // Added end keypartsHT = new Hashtable(); keypartsHT.Add("ProdcutInfo", product); keypartsHT.Add("MOWillGo", moWillGo); IDCTClient client = act as IDCTClient; OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider); MOFacade moFacade = new MOFacade(domainProvider); object[] objBomDetail = null; Messages messages1 = new Messages(); if (moWillGo == null) { // 检查途程 messages1 = _helper.CheckID( new CKeypartsActionEventArgs( ActionType.DataCollectAction_CollectINNO, product.LastSimulation.RunningCard, client.LoginedUser, client.ResourceCode, product, null, null)); } if (messages1.IsSuccess() == true) { //objBomDetail = opBOMFacade.GetOPBOMDetails( // product.NowSimulation.MOCode, // product.NowSimulation.RouteCode, // product.NowSimulation.OPCode); //Miodified by Scott MO moNew = (MO)moFacade.GetMO(product.NowSimulation.MOCode); objBomDetail = opBOMFacade.QueryOPBOMDetail(product.NowSimulation.ItemCode, string.Empty, string.Empty, moNew.BOMVersion, product.NowSimulation.RouteCode, product.NowSimulation.OPCode, (int)MaterialType.CollectMaterial, int.MinValue, int.MaxValue, moNew.OrganizationID, true); if (objBomDetail == null) { messages1.Add(new UserControl.Message(MessageType.Error, "$CS_OPBOM_NotFound")); } } else { return(messages1); } //object mo = moFacade.GetMO( product.LastSimulation.MOCode ); object mo = moWillGo; if (moWillGo == null) { mo = moFacade.GetMO(product.LastSimulation.MOCode); } //OPBomKeyparts opBomKeyparts = new OPBomKeyparts(objBomDetail, Convert.ToInt32(((MO)mo).IDMergeRule), domainProvider); // 查询OPBOM if (objBomDetail == null) { msgProduct.Add(new Message(MessageType.Error, "$CS_NOOPBomInfo $CS_Param_MOCode=" + product.NowSimulation.MOCode + " $CS_Param_RouteCode=" + product.NowSimulation.RouteCode + " $CS_Param_OPCode =" + product.NowSimulation.OPCode)); return(msgProduct); } else { this.filterOpBomDetail(ref objBomDetail); if (objBomDetail == null || objBomDetail.Length <= 0) { msgProduct.Add(new Message(MessageType.Error, "$CS_OPBOM_NotFound")); return(msgProduct); } for (int i = 0; i < objBomDetail.Length; i++) { if (((OPBOMDetail)objBomDetail[i]).OPBOMItemControlType == "item_control_lot") { opBomDetailCount += 1; } else { opBomDetailCount += Convert.ToInt32(((OPBOMDetail)objBomDetail[i]).OPBOMItemQty); } } for (int i = 0; i < objBomDetail.Length; i++) { if (((OPBOMDetail)objBomDetail[i]).OPBOMItemControlType == "item_control_lot") { opBomDetailList.Add(objBomDetail[i]); } else { int number = Convert.ToInt32(((OPBOMDetail)objBomDetail[i]).OPBOMItemQty); for (int j = 0; j < number; j++) { opBomDetailList.Add(objBomDetail[i]); } } } if (((OPBOMDetail)objBomDetail[0]).OPBOMItemControlType == BOMItemControlType.ITEM_CONTROL_LOT) { msgProduct.Add(new UserControl.Message(MessageType.Normal, ">>$DCT_PLEASE_INPUT_Lot " + ((OPBOMDetail)objBomDetail[0]).OPBOMSourceItemCode)); } else { msgProduct.Add(new UserControl.Message(MessageType.Normal, ">>$DCT_PLEASE_INPUT_Keyparts " + ((OPBOMDetail)objBomDetail[0]).OPBOMSourceItemCode)); } // keypartsHT.Add("KeypartsInfo", opBomKeyparts); keypartsHT.Add("Opbomdetail", objBomDetail); } return(msgProduct); } catch (Exception ex) { throw ex; } finally { ((SQLDomainDataProvider)domainProvider).PersistBroker.CloseConnection(); ((SQLDomainDataProvider)domainProvider).PersistBroker.AutoCloseConnection = true; } }
//bighai.wang 2009/03/03 发料物料标签打印 public UserControl.Messages PrintMaterialLot(string printer, List <string> materialLot) { UserControl.Messages messages = new UserControl.Messages(); string varName = string.Empty; string templatePath = string.Empty; string fileName = string.Empty; try { try { SystemSettingFacade parameter = new SystemSettingFacade(); fileName = parameter.GetGetParameterFileName("TemplateFileName", "MATERIALTYPE"); //templatePath = System.Environment.CurrentDirectory+"\\" + fileName; varName = parameter.GetGetParameterFileName("VarName", "MATERIALTYPE"); this.PrePrint(); _CodeSoftFacade.OpenTemplateMaterialLot(printer, fileName, varName); } catch (System.Exception ex) { messages.Add(new UserControl.Message(UserControl.MessageType.Error, ex.Message)); return(messages); } //批量打印前生成文本文件 string strBatchDataFile = string.Empty; if (_IsBatchPrint) { strBatchDataFile = CreateFile(); } for (int i = 0; i < materialLot.Count; i++) { LabelPrintVars labelPrintVars = new LabelPrintVars(); string[] vars = new string[0]; if (messages.IsSuccess()) { try { //要传给Codesoft的数组,字段顺序不能修改 vars = this.GetPrintVarsMaterialLot(materialLot[i]); //批量打印前的写文件 if (_IsBatchPrint) { string[] printVars = ProcessVars(vars, labelPrintVars); WriteFile(strBatchDataFile, printVars); } //直接打印 //else //{ _CodeSoftFacade.LabelPrintVars = labelPrintVars; _CodeSoftFacade.Print(vars, varName, fileName); //} } catch (System.Exception ex) { messages.Add(new UserControl.Message(UserControl.MessageType.Error, ex.Message)); return(messages); } } } //messages.Add(new UserControl.Message(UserControl.MessageType.Success, "$Success_Print_Label")); } finally { } return(messages); }
public UserControl.Messages Print(string printer, string templatePath, MKeyPart mKeyPart, List <MKeyPartDetail> mKeyPartDetailList, List <string> reserveInfo) { UserControl.Messages messages = new UserControl.Messages(); try { try { this.PrePrint(); _CodeSoftFacade.OpenTemplate(printer, templatePath); } catch (System.Exception ex) { messages.Add(new UserControl.Message(UserControl.MessageType.Error, ex.Message)); return(messages); } //批量打印前生成文本文件 string strBatchDataFile = string.Empty; if (_IsBatchPrint) { strBatchDataFile = CreateFile(); } for (int i = 0; i < mKeyPartDetailList.Count; i++) { LabelPrintVars labelPrintVars = new LabelPrintVars(); string[] vars = new string[0]; if (messages.IsSuccess()) { try { //要传给Codesoft的数组,字段顺序不能修改 vars = this.GetPrintVars(mKeyPart, mKeyPartDetailList[i], reserveInfo); //批量打印前的写文件 if (_IsBatchPrint) { string[] printVars = ProcessVars(vars, labelPrintVars); WriteFile(strBatchDataFile, printVars); } //直接打印 else { _CodeSoftFacade.LabelPrintVars = labelPrintVars; _CodeSoftFacade.Print(vars); } } catch (System.Exception ex) { messages.Add(new UserControl.Message(UserControl.MessageType.Error, ex.Message)); return(messages); } } } //批量打印 if (_IsBatchPrint) { try { _CodeSoftFacade.Print(strBatchDataFile, GetDataDescPath(_DataDescFileName)); } catch (System.Exception ex) { messages.Add(new UserControl.Message(UserControl.MessageType.Error, ex.Message)); return(messages); } } messages.Add(new UserControl.Message(UserControl.MessageType.Success, "$Success_Print_Label")); } finally { } return(messages); }
// Added by Icyer 2006/12/15 // 检查产品 private Messages CheckProduct(object act, string runningCard) { // 查询产品信息 BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null; if ((act as IDCTClient).DBConnection != null) { domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; } else { domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider() as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; (act as IDCTClient).DBConnection = domainProvider; } ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider); UserControl.Messages msgProduct = _helper.GetIDInfo(runningCard); ProductInfo product = (ProductInfo)msgProduct.GetData().Values[0]; if (product == null || product.LastSimulation == null) { msgProduct.ClearMessages(); msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation")); return(msgProduct); } mergeList = new Hashtable(); mergeList.Add("ProdcutInfo", msgProduct); // 转换比例 //this.IDMergeRule = Convert.ToInt32(product.LastSimulation.IDMergeRule); // 转换比例从工序中读 IDCTClient client = act as IDCTClient; OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider); // 检查途程 Messages messages1 = _helper.CheckID( new CKeypartsActionEventArgs( ActionType.DataCollectAction_Split, product.LastSimulation.RunningCard, client.LoginedUser, client.ResourceCode, product, null, null)); if (messages1.IsSuccess() == true) { object op = new ItemFacade(domainProvider).GetItemRoute2Operation( product.NowSimulation.ItemCode, product.NowSimulation.RouteCode, product.NowSimulation.OPCode); if (op == null) { messages1.Add(new UserControl.Message(MessageType.Error, "$Error_CS_Current_OP_Not_Exist")); return(messages1); } if (((ItemRoute2OP)op).OPControl[(int)BenQGuru.eMES.BaseSetting.OperationList.IDTranslation] != '1') { messages1.Add(new UserControl.Message(MessageType.Error, "$CS_OP_Not_SplitOP")); //当前工序不是序号转换工序 return(messages1); } // 转换比例 this.IDMergeRule = 1; if (((ItemRoute2OP)op).IDMergeType == IDMergeType.IDMERGETYPE_ROUTER) { this.IDMergeRule = (int)((ItemRoute2OP)op).IDMergeRule; } // 序号转换类型 mergeIdType = ((ItemRoute2OP)op).IDMergeType; ArrayList listId = new ArrayList(); mergeList.Add("MergeIdList", listId); } else { return(messages1); } return(msgProduct); }
public UserControl.Messages GoodCollect(object[] parserObjs) { UserControl.Messages returnMsg = new UserControl.Messages(); try { foreach (object obj in parserObjs) { PIDAOIData aoiData = obj as PIDAOIData; if (aoiData.RESULT == "PASS") { ActionOnLineHelper onLine = new ActionOnLineHelper(this._domainDataProvider); Messages messages = onLine.GetIDInfo(aoiData.RCARD.Trim().ToUpper()); try { ProductInfo product = (ProductInfo)messages.GetData().Values[0]; this._domainDataProvider.BeginTransaction(); // //归属工单采集 // IAction dataCollectMO = new ActionFactory(this._domainDataProvider).CreateAction(ActionType.DataCollectAction_GoMO); // messages.AddMessages(((IActionWithStatus)dataCollectMO).Execute( // new GoToMOActionEventArgs(ActionType.DataCollectAction_GoMO, // aoiData.RCARD.Trim().ToUpper(), // aoiData.USER.Trim().ToUpper(), // AgentHelp.getResCode(aoiData.RESOURCE.Trim().ToUpper()), // product,this.getMOCode(aoiData.RCARD.Trim().ToUpper())))); // string goodResult = string.Empty; // if(messages.IsSuccess()) // { // returnMsg.Add( new UserControl.Message(UserControl.MessageType.Succes,string.Format("{0} $CS_GOMO_CollectSuccess",aoiData.RCARD.ToUpper())) ); // } // else // { // returnMsg.Add( new UserControl.Message(UserControl.MessageType.Error,AgentHelp.GetErrorMessage(messages))); // } // messages.ClearMessages(); //GOOD采集 messages = onLine.GetIDInfo(aoiData.RCARD.Trim().ToUpper()); product = (ProductInfo)messages.GetData().Values[0]; BenQGuru.eMES.DataCollect.DataCollectFacade dcFacade = new BenQGuru.eMES.DataCollect.DataCollectFacade(this._domainDataProvider); goodResult = dcFacade.ActionCollectGood(aoiData.RCARD.ToUpper(), aoiData.USER.ToUpper(), AgentHelp.getResCode(aoiData.RESOURCE.ToUpper())); if (goodResult == "OK") { this._domainDataProvider.CommitTransaction(); returnMsg.Add(new UserControl.Message(UserControl.MessageType.Success, string.Format("{0} $CS_GOOD_CollectSuccess", aoiData.RCARD.ToUpper()))); returnMsg.Add(new UserControl.Message(" ")); BenQGuru.eMES.Common.Log.Info(string.Format("{0} $CS_GOOD_CollectSuccess: {1}", aoiData.RCARD.Trim().ToUpper(), "OK")); messages.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_GOODSUCCESS,$CS_Param_ID:{0}", aoiData.RCARD.ToUpper()))); } else { this._domainDataProvider.RollbackTransaction(); string errorMsg = string.Format("{0} $CS_GOOD_CollectFail : {1}", aoiData.RCARD.Trim().ToUpper(), goodResult); returnMsg.Add(new UserControl.Message(UserControl.MessageType.Error, errorMsg)); returnMsg.Add(new UserControl.Message(" ")); BenQGuru.eMES.Common.Log.Info(errorMsg); } } catch (Exception ex) { this._domainDataProvider.RollbackTransaction(); BenQGuru.eMES.Common.Log.Info(AgentHelp.GetErrorMessage(messages), ex); } finally { ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)_domainDataProvider).PersistBroker.CloseConnection(); } } } } catch {} return(returnMsg); }
public void AddEx(string function, string inputContent, UserControl.Message message, bool recordWorkingError) { UserControl.Messages messages = new UserControl.Messages(); messages.Add(message); AddEx(function, inputContent, messages, recordWorkingError); }
public void Add(UserControl.Message message) { UserControl.Messages messages = new UserControl.Messages(); messages.Add(message); this.Add(messages); }
private void txtRCard_TxtboxKeyPress(object sender, System.Windows.Forms.KeyPressEventArgs e) { if (e.KeyChar == '\r') { UserControl.Messages msg = new UserControl.Messages(); string rcard = Web.Helper.FormatHelper.CleanString(txtRCard.Value.Trim().ToUpper()); //检查产品序列号格式 msg.AddMessages(MatchMo(rcard, CurrentSequence - 1)); if (!msg.IsSuccess()) { ucMessage.Add(msg); this.txtMoCode.TextFocus(false, true); return; } else { #region 业务处理 //如果为最后一次,则提交更新 if (CurrentSequence == dsMo.MultiMo.Rows.Count) { //更新RunningCard UpdateListRCard(CurrentSequence - 1); ActionOnLineHelper _helper = new ActionOnLineHelper(this.DataProvider); DataProvider.BeginTransaction(); try { #region 循环完成归属工单 foreach (DataRow dr in dsMo.MultiMo) { string runningCard = Convert.ToString(dr["产品序列号"]); string moCode = Convert.ToString(dr["工单"]); msg.AddMessages(_helper.GetIDInfo(runningCard)); if (msg.IsSuccess()) { ProductInfo product = (ProductInfo)msg.GetData().Values[0]; GoToMOActionEventArgs args = new GoToMOActionEventArgs( ActionType.DataCollectAction_GoMO, runningCard, ApplicationService.Current().UserCode, ApplicationService.Current().ResourceCode, product, moCode); IAction action = new ActionFactory(this.DataProvider).CreateAction(ActionType.DataCollectAction_GoMO); msg.AddMessages(action.Execute(args)); } if (msg.IsSuccess()) { this.DataProvider.CommitTransaction(); UpdateCollectQty(); msg.Add(new UserControl.Message(MessageType.Success, "$CS_GOMO_CollectSuccess $CS_GONEXT_BILL")); } else { ClearListRCard(); this.DataProvider.RollbackTransaction(); break; } } #endregion } catch (Exception E) { ClearListRCard(); this.DataProvider.RollbackTransaction(); msg.Add(new UserControl.Message(E)); } finally { //Laws Lu,2005/10/19,新增 缓解性能问题 ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection(); ucMessage.Add(msg); if (MoCodes != null && MoCodes.Length > 0) { UpdateList(MoCodes); } //CurrentSequence = 1; //dsMo.MultiMo.AcceptChanges(); } } else { //更新RunningCard UpdateListRCard(CurrentSequence - 1); CurrentSequence++; } #endregion } //提示用户继续输入产品序列号 ucMessage.Add(">>$CS_Please_Input_RunningCard " + CurrentSequence.ToString() + "/" + dsMo.MultiMo.Rows.Count.ToString()); txtRCard.Value = ""; txtRCard.TextFocus(false, true); } }
public UserControl.Messages GoodCollect(object[] parserObjs) { UserControl.Messages returnMsg = new UserControl.Messages(); try { foreach (object obj in parserObjs) { ICTData ictData = obj as ICTData; if (ictData.RESULT.Trim().ToUpper() == "PASS") { ActionOnLineHelper onLine = new ActionOnLineHelper(this._domainDataProvider); ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)_domainDataProvider).PersistBroker.AutoCloseConnection = false; ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)_domainDataProvider).PersistBroker.OpenConnection(); Messages messages = onLine.GetIDInfo(ictData.RCARD.Trim().ToUpper()); try { ProductInfo product = (ProductInfo)messages.GetData().Values[0]; this._domainDataProvider.BeginTransaction(); if (AgentInfo.AllowGoToMO == true) { string moCode = this.getMOCode(ictData.RCARD.Trim().ToUpper()); if (System.Configuration.ConfigurationSettings.AppSettings["MOPREFIXSTRING"] != null) { string moPrefix = System.Configuration.ConfigurationSettings.AppSettings["MOPREFIXSTRING"].Trim(); //首字符串检查 if (moCode.Length < moPrefix.Length || moCode.Substring(0, moPrefix.Length) != moPrefix) { returnMsg.Add(new UserControl.Message(MessageType.Error , "$CS_Before_Card_FLetter_NotCompare $CS_Param_ID: " + ictData.RCARD.Trim().ToUpper())); } } if (System.Configuration.ConfigurationSettings.AppSettings["SNLENGTH"] != null) { try { int snLength = int.Parse(System.Configuration.ConfigurationSettings.AppSettings["SNLENGTH"].Trim()); //长度检查 if (ictData.RCARD.Trim().ToUpper().Length != snLength) { returnMsg.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Length_FLetter_NotCompare $CS_Param_ID: " + ictData.RCARD.Trim().ToUpper())); } } catch (Exception ex) { returnMsg.Add(new UserControl.Message(ex)); } } if (returnMsg.IsSuccess()) { IAction dataCollectMO = new ActionFactory(this._domainDataProvider).CreateAction(ActionType.DataCollectAction_GoMO); messages.AddMessages(((IActionWithStatus)dataCollectMO).Execute( new GoToMOActionEventArgs(ActionType.DataCollectAction_GoMO, ictData.RCARD.Trim().ToUpper(), ictData.USER.Trim().ToUpper(), AgentHelp.getResCode(ictData.RESOURCE.Trim().ToUpper()), product, moCode))); if (messages.IsSuccess()) { returnMsg.Add(new UserControl.Message(UserControl.MessageType.Success, string.Format("{0} $CS_GOMO_CollectSuccess", ictData.RCARD.ToUpper()))); } else { returnMsg.Add(new UserControl.Message(UserControl.MessageType.Error, AgentHelp.GetErrorMessage(messages))); } } messages.ClearMessages(); } string goodResult = string.Empty; //GOOD采集 messages = onLine.GetIDInfo(ictData.RCARD.Trim().ToUpper()); product = (ProductInfo)messages.GetData().Values[0]; BenQGuru.eMES.DataCollect.DataCollectFacade dcFacade = new BenQGuru.eMES.DataCollect.DataCollectFacade(this._domainDataProvider); goodResult = dcFacade.ActionCollectGood(ictData.RCARD.ToUpper(), ictData.USER.ToUpper(), AgentHelp.getResCode(ictData.RESOURCE.ToUpper())); if (goodResult == "OK") { this._domainDataProvider.CommitTransaction(); returnMsg.Add(new UserControl.Message(UserControl.MessageType.Success, string.Format("{0} $CS_GOOD_CollectSuccess", ictData.RCARD.ToUpper()))); returnMsg.Add(new UserControl.Message(" ")); BenQGuru.eMES.Common.Log.Info(string.Format("{0} $CS_GOOD_CollectSuccess: {1}", ictData.RCARD.Trim().ToUpper(), "OK")); messages.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_GOODSUCCESS,$CS_Param_ID:{0}", ictData.RCARD.ToUpper()))); } else { this._domainDataProvider.RollbackTransaction(); string errorMsg = string.Format("{0} $CS_GOOD_CollectFail : {1}", ictData.RCARD.Trim().ToUpper(), goodResult); returnMsg.Add(new UserControl.Message(UserControl.MessageType.Error, errorMsg)); returnMsg.Add(new UserControl.Message(" ")); BenQGuru.eMES.Common.Log.Info(errorMsg); } } catch (Exception ex) { this._domainDataProvider.RollbackTransaction(); BenQGuru.eMES.Common.Log.Info(AgentHelp.GetErrorMessage(messages), ex); } finally { // ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)_domainDataProvider).PersistBroker.CloseConnection(); // ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)_domainDataProvider).PersistBroker.AutoCloseConnection = true; } } } } catch {} return(returnMsg); }
public UserControl.Messages GoodCollect(object[] parserObjs) { UserControl.Messages returnMsg = new UserControl.Messages(); try { foreach (object obj in parserObjs) { AOIData aoiData = obj as AOIData; int errorCount = 0; try { errorCount = int.Parse(aoiData.ERRORCOUNT); } catch {} if (errorCount == 0) { ActionOnLineHelper onLine = new ActionOnLineHelper(this._domainDataProvider); // ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)_domainDataProvider).PersistBroker.AutoCloseConnection = false; // ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)_domainDataProvider).PersistBroker.OpenConnection(); Messages messages = onLine.GetIDInfo(aoiData.RCARD.Trim().ToUpper()); try { ProductInfo product = (ProductInfo)messages.GetData().Values[0]; // Added by Icyer 2006/08/03 // 只有当Simulation中没有数据时,才认为是第一次经过AOI站,才执行SMT上料 bool bExecuteSMTLoadItem = (product.LastSimulation == null); // Added end this._domainDataProvider.BeginTransaction(); string goodResult = string.Empty; //归属工单采集 //Laws Lu,2006/08/10 归属工单时需要检查是否符合首字符串和长度检查 string moCode = this.getMOCode(aoiData.RCARD.Trim().ToUpper()); if (System.Configuration.ConfigurationSettings.AppSettings["MOPREFIXSTRING"] != null) { string moPrefix = System.Configuration.ConfigurationSettings.AppSettings["MOPREFIXSTRING"].Trim(); //首字符串检查 if (moCode.Length < moPrefix.Length || moCode.Substring(0, moPrefix.Length) != moPrefix) { returnMsg.Add(new UserControl.Message(MessageType.Error , "$CS_Before_Card_FLetter_NotCompare $CS_Param_ID: " + aoiData.RCARD.Trim().ToUpper())); } } if (System.Configuration.ConfigurationSettings.AppSettings["SNLENGTH"] != null) { try { int snLength = int.Parse(System.Configuration.ConfigurationSettings.AppSettings["SNLENGTH"].Trim()); //长度检查 if (aoiData.RCARD.Trim().ToUpper().Length != snLength) { returnMsg.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Length_FLetter_NotCompare $CS_Param_ID: " + aoiData.RCARD.Trim().ToUpper())); } } catch (Exception ex) { returnMsg.Add(new UserControl.Message(ex)); } } if (returnMsg.IsSuccess()) { IAction dataCollectMO = new ActionFactory(this._domainDataProvider).CreateAction(ActionType.DataCollectAction_GoMO); messages.AddMessages(((IActionWithStatus)dataCollectMO).Execute( new GoToMOActionEventArgs(ActionType.DataCollectAction_GoMO, aoiData.RCARD.Trim().ToUpper(), aoiData.USER.Trim().ToUpper(), AgentHelp.getResCode(aoiData.RESOURCE.Trim().ToUpper()), product, moCode))); if (messages.IsSuccess()) { returnMsg.Add(new UserControl.Message(UserControl.MessageType.Success, string.Format("{0} $CS_GOMO_CollectSuccess", aoiData.RCARD.ToUpper()))); } else { returnMsg.Add(new UserControl.Message(UserControl.MessageType.Error, AgentHelp.GetErrorMessage(messages))); } } messages.ClearMessages(); //GOOD采集 messages = onLine.GetIDInfo(aoiData.RCARD.Trim().ToUpper()); product = (ProductInfo)messages.GetData().Values[0]; BenQGuru.eMES.DataCollect.DataCollectFacade dcFacade = new BenQGuru.eMES.DataCollect.DataCollectFacade(this._domainDataProvider); goodResult = dcFacade.ActionCollectGood(aoiData.RCARD.ToUpper(), aoiData.USER.ToUpper(), AgentHelp.getResCode(aoiData.RESOURCE.ToUpper())); // Added by Icyer 2006/08/03 // SMT上料 if (returnMsg.IsSuccess() == true && bExecuteSMTLoadItem == true) { returnMsg.AddMessages(this.SMTLoadItem(aoiData.RCARD.ToUpper(), AgentHelp.getResCode(aoiData.RESOURCE.ToUpper()), aoiData.USER.ToUpper())); } // Added end if (goodResult == "OK") { this._domainDataProvider.CommitTransaction(); returnMsg.Add(new UserControl.Message(UserControl.MessageType.Success, string.Format("{0} $CS_GOOD_CollectSuccess", aoiData.RCARD.ToUpper()))); returnMsg.Add(new UserControl.Message(" ")); BenQGuru.eMES.Common.Log.Info(string.Format("{0} $CS_GOOD_CollectSuccess: {1}", aoiData.RCARD.Trim().ToUpper(), "OK")); messages.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_GOODSUCCESS,$CS_Param_ID:{0}", aoiData.RCARD.ToUpper()))); } else { this._domainDataProvider.RollbackTransaction(); string errorMsg = string.Format("{0} $CS_GOOD_CollectFail : {1}", aoiData.RCARD.Trim().ToUpper(), goodResult); returnMsg.Add(new UserControl.Message(UserControl.MessageType.Error, errorMsg)); returnMsg.Add(new UserControl.Message(" ")); BenQGuru.eMES.Common.Log.Info(errorMsg); } } catch (Exception ex) { this._domainDataProvider.RollbackTransaction(); BenQGuru.eMES.Common.Log.Info(AgentHelp.GetErrorMessage(messages), ex); } finally { // ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)_domainDataProvider).PersistBroker.CloseConnection(); // ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)_domainDataProvider).PersistBroker.AutoCloseConnection = true; } } } } catch {} return(returnMsg); }